summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-12-14mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 routerJiri Pirko
In case the eXtended mezzanine is present on the system, use it for IPv4 router offload. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3Jiri Pirko
Set a profile option to instruct FW to use 1/2 of KVH for XLT cache, not the whole one. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: spectrum_router_xm: Introduce basic XM cache flushingJiri Pirko
Upon route insertion and removal, it is needed to flush possibly cached entries from the XM cache. Extend XM op context to carry information needed for the flush. Implement the flush in delayed work since for HW design reasons there is a need to wait 50usec before the flush can be done. If during this time comes the same flush request, consolidate it to the first one. Implement this queued flushes by a hashtable. v2: * Fix GENMASK() high bit Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: reg: Add Router LPM Cache Enable RegisterJiri Pirko
The RLPMCE allows disabling the LPM cache. Can be changed on the fly. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: reg: Add Router LPM Cache ML Delete RegisterJiri Pirko
The RLCMLD register is used to bulk delete the XLT-LPM cache ML entries. This can be used by SW when L is increased or decreased, thus need to remove entries with old ML values. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: spectrum_router_xm: Implement L-value tracking for M-indexJiri Pirko
There is a table that assigns L-value per M-index. The L is always the biggest from the currently inserted prefixes. Setup a hashtable to track the M-index information and the prefixes that are related to it. Ensure the L-value is always correctly set. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: reg: Add XM Router M Table RegisterJiri Pirko
The XRMT configures the M-Table for the XLT-LPM. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: spectrum_router: Introduce per-ASIC XM initializationJiri Pirko
During the router init flow, call into XM code and initialize couple of items needed for XM functionality: 1) Query the capabilities and sizes. Check the XM device id. 2) Initialize the M-value. Note that currently the M-value is set fixed to 16 for IPv4. In future this may change to better cover the actual inserted routes. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: reg: Add XM Lookup Table Query RegisterJiri Pirko
The XLTQ is used to query HW for XM-related info. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: reg: Add Router XLT M select RegisterJiri Pirko
The RXLTM configures and selects the M for the XM lookups. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: Ignore ports that are connected to eXtended mezanineJiri Pirko
Use the info stored in the bus_info struct about the eXtended mezanine connected ports and don't expose them. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: pci: Obtain info about ports used by eXtended mezanineJiri Pirko
The output of boardinfo command was extended to contain information about XM. Indicates if is present and in case it is, tells which localports are used for the connection. So parse this info and store it in bus_info passed up to the driver. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: spectrum_router: Introduce XM implementation of router low-level opsJiri Pirko
In order to offload entries to XM, implement a set of low-level functions to work with LPM trees in XM and also to pack and write FIB entries into XM. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: reg: Add Router XLT Enable RegisterJiri Pirko
The RXLTE enables XLT (eXtended Lookup Table) LPM lookups if a capable XM is present on the system. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: reg: Add XM Direct RegisterJiri Pirko
The XMDR allows direct access to the XM device via the switch. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14bnxt_en: Enable batch mode when using HWRM_NVM_MODIFY to flash packages.Michael Chan
The current scheme allocates a DMA buffer as big as the requested firmware package file and DMAs the contents to firmware in one operation. The buffer size can be several hundred kilo bytes and the driver may not be able to allocate the memory. This will cause firmware upgrade to fail. Improve the scheme by using smaller DMA blocks and calling firmware to DMA each block in a batch mode. Older firmware can cause excessive NVRAM erases if the block size is too small so we try to allocate a 256K buffer to begin with and size it down successively if we cannot allocate the memory. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14bnxt_en: Retry installing FW package under NO_SPACE error condition.Pavan Chebbi
In bnxt_flash_package_from_fw_obj(), if firmware returns the NO_SPACE error, call __bnxt_flash_nvram() to create the UPDATE directory and then loop back and retry one more time. Since the first try may fail, we use the silent version to send the firmware commands. Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14bnxt_en: Restructure bnxt_flash_package_from_fw_obj() to execute in a loop.Pavan Chebbi
On NICs with a smaller NVRAM, FW installation may fail after multiple updates due to fragmentation. The driver can retry when FW returns a special error code. To faciliate the retry, we restructure the logic that performs the flashing in a loop. The actual retry logic will be added in the next patch. Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14bnxt_en: Rearrange the logic in bnxt_flash_package_from_fw_obj().Michael Chan
This function will be modified in the next patch to retry flashing the firmware in a loop. To facilate that, we rearrange the code so that the steps that only need to be done once before the loop will be moved to the top of the function. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14bnxt_en: Refactor bnxt_flash_nvram.Pavan Chebbi
Refactor bnxt_flash_nvram() into __bnxt_flash_nvram() that takes an additional dir_item_len parameter. The new function will be used in subsequent patches with the dir_item_len parameter set to create the UPDATE directory during flashing. Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14ice, xsk: Move Rx allocation out of while-loopBjörn Töpel
Instead doing the check for allocation in each loop, move it outside the while loop and do it every NAPI loop. This change boosts the xdpsock rxdrop scenario with 15% more packets-per-second. Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/r/20201211085410.59350-1-bjorn.topel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14net: mtk_eth: simplify the mediatek code return expressionZheng Yongjun
Simplify the return expression at mtk_eth_path.c file, simplify this all. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201211083801.1632-1-zhengyongjun3@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14octeontx2-af: Add devlink health reporters for NPAGeorge Cherian
Add health reporters for RVU NPA block. NPA Health reporters handle following HW event groups - GENERAL events - ERROR events - RAS events - RVU event Output: #devlink health pci/0002:01:00.0: reporter hw_npa_intr state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true reporter hw_npa_gen state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true reporter hw_npa_err state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true reporter hw_npa_ras state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true #devlink health dump show pci/0002:01:00.0 reporter hw_npa_err NPA_AF_ERR: NPA Error Interrupt Reg : 4096 AQ Doorbell Error #devlink health dump show pci/0002:01:00.0 reporter hw_npa_ras NPA_AF_RVU_RAS: NPA RAS Interrupt Reg : 0 Each reporter dump shows the Register value and the description of the cause. Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: George Cherian <george.cherian@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14octeontx2-af: Add devlink suppoort to af driverGeorge Cherian
Add devlink support to AF driver. Basic devlink support is added. Currently info_get is the only supported devlink ops. devlink ouptput looks like this # devlink dev pci/0002:01:00.0 # devlink dev info pci/0002:01:00.0: driver octeontx2-af # Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: George Cherian <george.cherian@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14net: mhi: Fix unexpected queue wakeLoic Poulain
This patch checks that MHI queue is not full before waking up the net queue. This fix sporadic MHI queueing issues in xmit. Indeed xmit and its symmetric complete callback (ul_callback) can run concurently, it is then not safe to unconditionnaly waking the queue in the callback without checking queue fullness. Fixes: 3ffec6a14f24 ("net: Add mhi-net driver") Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1607599507-5879-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14net: dsa: mv88e6xxx: don't set non-existing learn2all bit for 6220/6250Rasmus Villemoes
The 6220 and 6250 switches do not have a learn2all bit in global1, ATU control register; bit 3 is reserverd. On the switches that do have that bit, it is used to control whether learning frames are sent out the ports that have the message_port bit set. So rather than adding yet another chip method, use the existence of the ->port_setup_message_port method as a proxy for determining whether the learn2all bit exists (and should be set). Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Link: https://lore.kernel.org/r/20201210110645.27765-1-rasmus.villemoes@prevas.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-12nfc: s3fwrn5: let core configure the interrupt triggerKrzysztof Kozlowski
If interrupt trigger is not set when requesting the interrupt, the core will take care of reading trigger type from Devicetree. There is no point to do it in the driver. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201210211824.214949-1-krzk@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-12net: dsa: mt7530: enable MTU normalizationDENG Qingfang
MT7530 has a global RX length register, so we are actually changing its MRU. Enable MTU normalization for this reason. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Acked-by: Landen Chao <landen.chao@mediatek.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20201210170322.3433-1-dqfext@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-12Merge tag 'wireless-drivers-next-2020-12-12' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.11 Second set of patches for v5.11. iwlwifi gaining support for the new 6 GHz band and rtw88 got a new channel. Lots of new features for mt76 and ath11k now has working suspend for PCI devices. And as always, smaller fixes and cleanups all over. Major changes: rtw88 * add support for channel 144 mt76 * support for more sta interfaces on mt7615/mt7915 * mt7915 encapsulation offload * performance improvements * channel noise report on mt7915 * mt7915 testmode support * mt7915 DBDC support iwlwifi * support 6 GHz band ath11k * suspend support for QCA6390 PCI devices * support TXOP duration based RTS threshold * mesh: add support for 256 bitmap in blockack frames in 11ax * tag 'wireless-drivers-next-2020-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (197 commits) ath11k: implement suspend for QCA6390 PCI devices ath11k: hif: add ce irq enable and disable functions ath11k: implement WoW enable and wakeup commands ath11k: set credit_update flag for flow controlled ep only ath11k: dp: stop rx pktlog before suspend ath11k: htc: implement suspend handling ath11k: htc: remove unused struct ath11k_htc_ops ath11k: pci: read select_window register to ensure write is finished ath11k: hif: implement suspend and resume functions ath11k: mhi: hook suspend and resume ath11k: Fix incorrect tlvs in scan start command ath11k: pci: disable VDD4BLOW ath11k: pci: fix L1ss clock unstable problem ath11k: pci: fix hot reset stability issues ath11k: put hw to DBS using WMI_PDEV_SET_HW_MODE_CMDID ath11k: mhi: print a warning if firmware crashed ath11k: use MHI provided APIs to allocate and free MHI controller ath10k: add atomic protection for device recovery ath10k: add option for chip-id based BDF selection mt76: remove unused variable q ... ==================== Link: https://lore.kernel.org/r/20201212050839.EF50EC433C6@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-12Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v5.11. Major changes: ath11k * suspend support for QCA6390 PCI devices * support TXOP duration based RTS threshold * mesh: add support for 256 bitmap in blockack frames in 11ax
2020-12-12ath11k: implement suspend for QCA6390 PCI devicesCarl Huang
Now that all the needed pieces are in place implement suspend support QCA6390 PCI devices. All other devices will return -EOPNOTSUPP during suspend. The suspend is implemented by switching the firmware to WoW mode during suspend, so the firmware will be running on low power mode while host is in suspend. At the moment we are not able to shutdown and fully power off the device due to bugs in MHI subsystem, so WoW mode is a workaround for the time being. During suspend we enable WoW mode, disable CE irq and DP irq, then put MHI to suspend state. During resume, driver resumes MHI firstly, then enables CE irq and dp IRQ, and sends WoW wakeup command to firmware. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-11-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: hif: add ce irq enable and disable functionsCarl Huang
Add ce irq enable and disable hif layer functions, so core module can enable enable them without cleaning pipe and refilling pipe. Needed for suspend. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-10-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: implement WoW enable and wakeup commandsCarl Huang
Implement wow enable ane wow wakeup commands which are needed for suspend. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-9-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: set credit_update flag for flow controlled ep onlyCarl Huang
Firmware will check all the pipes before entering WoW mode during suspend. If ATH11K_HTC_FLAG_NEED_CREDIT_UPDATE is set, firmware treats this pipe needed to return credit even though it's actually not required. If any pipe needs to return credit, the suspend_complete message doesn't send to host but is dropped. So host gets time out and WoW suspend failed. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-8-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: dp: stop rx pktlog before suspendCarl Huang
Stop dp rx pktlog when entering suspend and reap the mon_status buffer to keep it empty. During resume restart the reap timer. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-7-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: htc: implement suspend handlingCarl Huang
When ath11k sends suspend command to firmware, firmware will return suspend_complete events and add handlers for those. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-6-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: htc: remove unused struct ath11k_htc_opsKalle Valo
No need for it so remove. Compile tested only. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-5-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: pci: read select_window register to ensure write is finishedCarl Huang
Just when resume from WoW, the write to select_window doesn't take effect immediately, so read the register again to ensure the write operation is finished. Another change is to reset select_window to ZERO because this register isn't restored after WoW, so the content of this register becomes ZERO too. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-4-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: hif: implement suspend and resume functionsCarl Huang
For suspend support add suspend and resume to HIF layer. These ops are optional and, for example, AHB bus driver does not need to implement these. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-3-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: mhi: hook suspend and resumeCarl Huang
MHI suspend and resume isn't hooked in ath11k yet, so hook these functions needed for suspend support. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-2-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: Fix incorrect tlvs in scan start commandPradeep Kumar Chitrapu
Currently 6G specific tlvs have duplicate entries which is causing scan failures. Fix this by removing the duplicate entries of the same tlv. This also fixes out-of-bound memory writes caused due to adding tlvs when num_hint_bssid and num_hint_s_ssid are ZEROs. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01386-QCAHKSWPL_SILICONZ-1 Fixes: 74601ecfef6e ("ath11k: Add support for 6g scan hint") Reported-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607609124-17250-7-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: pci: disable VDD4BLOWCarl Huang
It's recommended to disable VDD4BLOW during initialisation. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607609124-17250-6-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: pci: fix L1ss clock unstable problemCarl Huang
For QCA6390, one PCI related clock drifts sometimes, and it makes PCI link difficult to quit L1ss. Fix it by writing some registers which are known to fix the problem. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607609124-17250-5-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: pci: fix hot reset stability issuesCarl Huang
For QCA6390, host needs to reset some registers before MHI power up to fix PCI link unstable issue if hot reset happened. Also clear all pending interrupts during power up. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607609124-17250-4-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: put hw to DBS using WMI_PDEV_SET_HW_MODE_CMDIDCarl Huang
It's recommended to use wmi command WMI_PDEV_SET_HW_MODE_CMDID to put hardware to dbs mode instead of wmi_init command. This fixes a few strange stability issues. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607609124-17250-3-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: mhi: print a warning if firmware crashedKalle Valo
There was no way to detect if the firmware crashed so add a warning. At the moment the firmware is not restarted or anything like that, so when this happens ath11k modules need to be reloaded. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607609124-17250-2-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: use MHI provided APIs to allocate and free MHI controllerBhaumik Bhatt
Use MHI provided APIs to allocate and free MHI controller to improve MHI host driver handling. This also fixes a memory leak as the MHI controller was allocated but never freed. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1605634436-36506-1-git-send-email-bbhatt@codeaurora.org
2020-12-12ath10k: add atomic protection for device recoveryWen Gong
When it has more than one restart_work queued meanwhile, the 2nd restart_work is very easy to break the 1st restart work and lead recovery fail. Add a flag to allow only one restart work running untill device successfully recovered. It already has flag ATH10K_FLAG_CRASH_FLUSH, but it can not use this flag again, because it is clear in ath10k_core_start. The function ieee80211_reconfig(called by ieee80211_restart_work) of mac80211 do many things and drv_start(call to ath10k_core_start) is 1st thing, when drv_start complete, it does not mean restart complete. So it add new flag and clear it in ath10k_reconfig_complete, because it is the last thing called from drv_reconfig_complete of function ieee80211_reconfig, after it, the restart process finished. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/010101746bead6a0-d5e97c66-dedd-4b92-810e-c2e4840fafc9-000000@us-west-2.amazonses.com
2020-12-12ath10k: add option for chip-id based BDF selectionAbhishek Kumar
In some devices difference in chip-id should be enough to pick the right BDF. Add another support for chip-id based BDF selection. With this new option, ath10k supports 2 fallback options. The board name with chip-id as option looks as follows board name 'bus=snoc,qmi-board-id=ff,qmi-chip-id=320' Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2-00696-QCAHLSWMTPL-1 Tested-on: QCA6174 HW3.2 WLAN.RM.4.4.1-00157-QCARMSWPZ-1 Signed-off-by: Abhishek Kumar <kuabhs@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201207231824.v3.1.Ia6b95087ca566f77423f3802a78b946f7b593ff5@changeid
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-29 17:56:19 +0000