summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-12-15net: libwx: fix memory leak on free pageduanqiangwen
ifconfig ethx up, will set page->refcount larger than 1, and then ifconfig ethx down, calling __page_frag_cache_drain() to free pages, it is not compatible with page pool. So deleting codes which changing page->refcount. Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI") Signed-off-by: duanqiangwen <duanqiangwen@net-swift.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-15USB: serial: option: add Quectel RM500Q R13 firmware supportReinhard Speyerer
Add support for Quectel RM500Q R13 firmware which uses Prot=40 for the NMEA port: T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 8 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2c7c ProdID=0800 Rev= 4.14 S: Manufacturer=Quectel S: Product=RM500Q-AE S: SerialNumber=xxxxxxxx C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-12-15USB: serial: option: add Foxconn T99W265 with new baselineSlark Xiao
This ID was added based on latest SDX12 code base line, and we made some changes with previous 0489:e0db. Test evidence as below: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 2 P: Vendor=0489 ProdID=e0da Rev=05.04 S: Manufacturer=Qualcomm S: Product=Qualcomm Snapdragon X12 S: SerialNumber=2bda65fb C: #Ifs= 6 Cfg#= 2 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) 0&1: MBIM, 2: Modem, 3:GNSS, 4:Diag, 5:ADB Signed-off-by: Slark Xiao <slark_xiao@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-12-14cxl/pmu: Ensure put_device on pmu devicesIra Weiny
The following kmemleaks were detected when removing the cxl module stack: unreferenced object 0xffff88822616b800 (size 1024): ... backtrace: [<00000000bedc6f83>] kmalloc_trace+0x26/0x90 [<00000000448d1afc>] devm_cxl_pmu_add+0x3a/0x110 [cxl_core] [<00000000ca3bfe16>] 0xffffffffa105213b [<00000000ba7f78dc>] local_pci_probe+0x41/0x90 [<000000005bb027ac>] pci_device_probe+0xb0/0x1c0 ... unreferenced object 0xffff8882260abcc0 (size 16): ... hex dump (first 16 bytes): 70 6d 75 5f 6d 65 6d 30 2e 30 00 26 82 88 ff ff pmu_mem0.0.&.... backtrace: ... [<00000000152b5e98>] dev_set_name+0x43/0x50 [<00000000c228798b>] devm_cxl_pmu_add+0x102/0x110 [cxl_core] [<00000000ca3bfe16>] 0xffffffffa105213b [<00000000ba7f78dc>] local_pci_probe+0x41/0x90 [<000000005bb027ac>] pci_device_probe+0xb0/0x1c0 ... unreferenced object 0xffff8882272af200 (size 256): ... backtrace: [<00000000bedc6f83>] kmalloc_trace+0x26/0x90 [<00000000a14d1813>] device_add+0x4ea/0x890 [<00000000a3f07b47>] devm_cxl_pmu_add+0xbe/0x110 [cxl_core] [<00000000ca3bfe16>] 0xffffffffa105213b [<00000000ba7f78dc>] local_pci_probe+0x41/0x90 [<000000005bb027ac>] pci_device_probe+0xb0/0x1c0 ... devm_cxl_pmu_add() correctly registers a device remove function but it only calls device_del() which is only part of device unregistration. Properly call device_unregister() to free up the memory associated with the device. Fixes: 1ad3f701c399 ("cxl/pci: Find and register CXL PMU devices") Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20231016-pmu-unregister-fix-v1-1-1e2eb2fa3c69@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-12-15drm/nouveau/kms/nv50-: Don't allow inheritance of headless iorsLyude Paul
Turns out we made a silly mistake when coming up with OR inheritance on nouveau. On pre-DCB 4.1, iors are statically routed to output paths via the DCB. On later generations iors are only routed to an output path if they're actually being used. Unfortunately, it appears with NVIF_OUTP_INHERIT_V0 we make the mistake of assuming the later is true on all generations, which is currently leading us to return bogus ior -> head assignments through nvif, which causes WARN_ON(). So - fix this by verifying that we actually know that there's a head assigned to an ior before allowing it to be inherited through nvif. This -should- hopefully fix the WARN_ON on GT218 reported by Borislav. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Reported-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231214004359.1028109-1-lyude@redhat.com
2023-12-15drm/nouveau: Fixup gk20a instobj hierarchyThierry Reding
Commit 12c9b05da918 ("drm/nouveau/imem: support allocations not preserved across suspend") uses container_of() to cast from struct nvkm_memory to struct nvkm_instobj, assuming that all instance objects are derived from struct nvkm_instobj. For the gk20a family that's not the case and they are derived from struct nvkm_memory instead. This causes some subtle data corruption (nvkm_instobj.preserve ends up mapping to gk20a_instobj.vaddr) that causes a NULL pointer dereference in gk20a_instobj_acquire_iommu() (and possibly elsewhere) and also prevents suspend/resume from working. Fix this by making struct gk20a_instobj derive from struct nvkm_instobj instead. Fixes: 12c9b05da918 ("drm/nouveau/imem: support allocations not preserved across suspend") Reported-by: Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231208104653.1917055-1-thierry.reding@gmail.com
2023-12-14Merge tag 'wireless-2023-12-14' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== * add (and fix) certificate for regdb handover to Chen-Yu Tsai * fix rfkill GPIO handling * a few driver (iwlwifi, mt76) crash fixes * logic fixes in the stack * tag 'wireless-2023-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: cfg80211: fix certs build to not depend on file order wifi: mt76: fix crash with WED rx support enabled wifi: iwlwifi: pcie: avoid a NULL pointer dereference wifi: mac80211: mesh_plink: fix matches_local logic wifi: mac80211: mesh: check element parsing succeeded wifi: mac80211: check defragmentation succeeded wifi: mac80211: don't re-add debugfs during reconfig net: rfkill: gpio: set GPIO direction wifi: mac80211: check if the existing link config remains unchanged wifi: cfg80211: Add my certificate wifi: iwlwifi: pcie: add another missing bh-disable for rxq->lock wifi: ieee80211: don't require protected vendor action frames ==================== Link: https://lore.kernel.org/r/20231214111515.60626-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14Merge tag 'mlx5-fixes-2023-12-13' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2023-12-13 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2023-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Correct snprintf truncation handling for fw_version buffer used by representors net/mlx5e: Correct snprintf truncation handling for fw_version buffer net/mlx5e: Fix error codes in alloc_branch_attr() net/mlx5e: Fix error code in mlx5e_tc_action_miss_mapping_get() net/mlx5: Refactor mlx5_flow_destination->rep pointer to vport num net/mlx5: Fix fw tracer first block check net/mlx5e: XDP, Drop fragmented packets larger than MTU size net/mlx5e: Decrease num_block_tc when unblock tc offload net/mlx5e: Fix overrun reported by coverity net/mlx5e: fix a potential double-free in fs_udp_create_groups net/mlx5e: Fix a race in command alloc flow net/mlx5e: Fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list() net/mlx5e: fix double free of encap_header Revert "net/mlx5e: fix double free of encap_header" Revert "net/mlx5e: fix double free of encap_header in update funcs" ==================== Link: https://lore.kernel.org/r/20231214012505.42666-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-12-13 (ice, i40e) This series contains updates to ice and i40e drivers. Michal Schmidt prevents possible out-of-bounds access for ice. Ivan Vecera corrects value for MDIO clause 45 on i40e. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: Fix ST code value for Clause 45 ice: fix theoretical out-of-bounds access in ethtool link modes ==================== Link: https://lore.kernel.org/r/20231213220827.1311772-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-15Merge tag 'drm-misc-fixes-2023-12-14' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v6.7-rc6: - Fix regression for checking if FD is master capable. - Fix uninitialized variables in drm/crtc. - Fix ivpu w/a. - Refresh modes correctly when updating EDID. - Small panel fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2d46b68f-c5a4-45e5-beb4-411569f4aac8@linux.intel.com
2023-12-15Merge tag 'amd-drm-fixes-6.7-2023-12-13' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.7-2023-12-13: amdgpu: - Fix suspend fix that got accidently mangled last week - Fix OD regression - PSR fixes - OLED Backlight regression fix - JPEG 4.0.5 fix - Misc display fixes - SDMA 5.2 fix - SDMA 2.4 regression fix - GPUVM race fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231213221122.4937-1-alexander.deucher@amd.com
2023-12-14net: mscc: ocelot: fix pMAC TX RMON stats for bucket 256-511 and aboveVladimir Oltean
The typo from ocelot_port_rmon_stats_cb() was also carried over to ocelot_port_pmac_rmon_stats_cb() as well, leading to incorrect TX RMON stats for the pMAC too. Fixes: ab3f97a9610a ("net: mscc: ocelot: export ethtool MAC Merge stats for Felix VSC9959") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231214000902.545625-2-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14net: mscc: ocelot: fix eMAC TX RMON stats for bucket 256-511 and aboveVladimir Oltean
There is a typo in the driver due to which we report incorrect TX RMON counters for the 256-511 octet bucket and all the other buckets larger than that. Bug found with the selftest at https://patchwork.kernel.org/project/netdevbpf/patch/20231211223346.2497157-9-tobias@waldekranz.com/ Fixes: e32036e1ae7b ("net: mscc: ocelot: add support for all sorts of standardized counters present in DSA") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231214000902.545625-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14Merge tag 'platform-drivers-x86-v6.7-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Ilpo Järvinen: - tablet-mode-switch events fix - kernel-doc warning fixes * tag 'platform-drivers-x86-v6.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: intel_ips: fix kernel-doc formatting platform/x86: thinkpad_acpi: fix kernel-doc warnings platform/x86: intel-vbtn: Fix missing tablet-mode-switch events
2023-12-15Merge tag 'drm-intel-fixes-2023-12-13' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v6.7-rc6: - Fix selftest engine reset count storage for multi-tile - Fix out-of-bounds reads for engine reset counts - Fix ADL+ remapped stride with CCS - Fix intel_atomic_setup_scalers() plane_state handling - Fix ADL+ tiled plane stride when the POT stride is smaller than the original - Fix eDP 1.4 rate select method link configuration Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/871qbqw4rw.fsf@intel.com
2023-12-14Merge tag 'net-6.7-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Current release - regressions: - tcp: fix tcp_disordered_ack() vs usec TS resolution Current release - new code bugs: - dpll: sanitize possible null pointer dereference in dpll_pin_parent_pin_set() - eth: octeon_ep: initialise control mbox tasks before using APIs Previous releases - regressions: - io_uring/af_unix: disable sending io_uring over sockets - eth: mlx5e: - TC, don't offload post action rule if not supported - fix possible deadlock on mlx5e_tx_timeout_work - eth: iavf: fix iavf_shutdown to call iavf_remove instead iavf_close - eth: bnxt_en: fix skb recycling logic in bnxt_deliver_skb() - eth: ena: fix DMA syncing in XDP path when SWIOTLB is on - eth: team: fix use-after-free when an option instance allocation fails Previous releases - always broken: - neighbour: don't let neigh_forced_gc() disable preemption for long - net: prevent mss overflow in skb_segment() - ipv6: support reporting otherwise unknown prefix flags in RTM_NEWPREFIX - tcp: remove acked SYN flag from packet in the transmit queue correctly - eth: octeontx2-af: - fix a use-after-free in rvu_nix_register_reporters - fix promisc mcam entry action - eth: dwmac-loongson: make sure MDIO is initialized before use - eth: atlantic: fix double free in ring reinit logic" * tag 'net-6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits) net: atlantic: fix double free in ring reinit logic appletalk: Fix Use-After-Free in atalk_ioctl net: stmmac: Handle disabled MDIO busses from devicetree net: stmmac: dwmac-qcom-ethqos: Fix drops in 10M SGMII RX dpaa2-switch: do not ask for MDB, VLAN and FDB replay dpaa2-switch: fix size of the dma_unmap net: prevent mss overflow in skb_segment() vsock/virtio: Fix unsigned integer wrap around in virtio_transport_has_space() Revert "tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set" MIPS: dts: loongson: drop incorrect dwmac fallback compatible stmmac: dwmac-loongson: drop useless check for compatible fallback stmmac: dwmac-loongson: Make sure MDIO is initialized before use tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set dpll: sanitize possible null pointer dereference in dpll_pin_parent_pin_set() net: ena: Fix XDP redirection error net: ena: Fix DMA syncing in XDP path when SWIOTLB is on net: ena: Fix xdp drops handling due to multibuf packets net: ena: Destroy correct number of xdp queues upon failure net: Remove acked SYN flag from packet in the transmit queue correctly qed: Fix a potential use-after-free in qed_cxt_tables_alloc ...
2023-12-14Merge tag 'reset-fixes-for-v6.7' of git://git.pengutronix.de/pza/linux into ↵Arnd Bergmann
arm/fixes Reset controller fixes for v6.7 Fix a void-pointer-to-enum-cast warning in the hisilicon hi6220 reset driver and fix a NULL pointer dereference when freeing non-existent optional resets requested via the reset_array API in the core. * tag 'reset-fixes-for-v6.7' of git://git.pengutronix.de/pza/linux: reset: Fix crash when freeing non-existent optional resets reset: hisilicon: hi6220: fix Wvoid-pointer-to-enum-cast warning Link: https://lore.kernel.org/r/20231213152606.231044-1-p.zabel@pengutronix.de Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-12-14net: atlantic: fix double free in ring reinit logicIgor Russkikh
Driver has a logic leak in ring data allocation/free, where double free may happen in aq_ring_free if system is under stress and driver init/deinit is happening. The probability is higher to get this during suspend/resume cycle. Verification was done simulating same conditions with stress -m 2000 --vm-bytes 20M --vm-hang 10 --backoff 1000 while true; do sudo ifconfig enp1s0 down; sudo ifconfig enp1s0 up; done Fixed by explicitly clearing pointers to NULL on deallocation Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Closes: https://lore.kernel.org/netdev/CAHk-=wiZZi7FcvqVSUirHBjx0bBUZ4dFrMDVLc3+3HCrtq0rBA@mail.gmail.com/ Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Link: https://lore.kernel.org/r/20231213094044.22988-1-irusskikh@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-14net: stmmac: Handle disabled MDIO busses from devicetreeAndrew Halaney
Many hardware configurations have the MDIO bus disabled, and are instead using some other MDIO bus to talk to the MAC's phy. of_mdiobus_register() returns -ENODEV in this case. Let's handle it gracefully instead of failing to probe the MAC. Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.") Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20231212-b4-stmmac-handle-mdio-enodev-v2-1-600171acf79f@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-14spi: atmel: Fix clock issue when using devices with different polaritiesLouis Chauvet
The current Atmel SPI controller driver (v2) behaves incorrectly when using two SPI devices with different clock polarities and GPIO CS. When switching from one device to another, the controller driver first enables the CS and then applies whatever configuration suits the targeted device (typically, the polarities). The side effect of such order is the apparition of a spurious clock edge after enabling the CS when the clock polarity needs to be inverted wrt. the previous configuration of the controller. This parasitic clock edge is problematic when the SPI device uses that edge for internal processing, which is perfectly legitimate given that its CS was asserted. Indeed, devices such as HVS8080 driven by driver gpio-sr in the kernel are shift registers and will process this first clock edge to perform a first register shift. In this case, the first bit gets lost and the whole data block that will later be read by the kernel is all shifted by one. Current behavior: The actual switching of the clock polarity only occurs after the CS when the controller sends the first message: CLK ------------\ /-\ /-\ | | | | | . . . \---/ \-/ \ CS -----\ | \------------------ ^ ^ ^ | | | | | Actual clock of the message sent | | | Change of clock polarity, which occurs with the first | write to the bus. This edge occurs when the CS is | already asserted, and can be interpreted as | the first clock edge by the receiver. | GPIO CS toggle This issue is specific to this controller because while the SPI core performs the operations in the right order, the controller however does not. In practice, the controller only applies the clock configuration right before the first transmission. So this is not a problem when using the controller's dedicated CS, as the controller does things correctly, but it becomes a problem when you need to change the clock polarity and use an external GPIO for the CS. One possible approach to solve this problem is to send a dummy message before actually activating the CS, so that the controller applies the clock polarity beforehand. New behavior: CLK ------\ /-\ /-\ /-\ /-\ | | | ... | | | | ... | | \------/ \- -/ \------/ \- -/ \------ CS -\/-----------------------\ || | \/ \--------------------- ^ ^ ^ ^ ^ | | | | | | | | | Expected clock cycles when | | | | sending the message | | | | | | | Actual GPIO CS activation, occurs inside | | | the driver | | | | | Dummy message, to trigger clock polarity | | reconfiguration. This message is not received and | | processed by the device because CS is low. | | | Change of clock polarity, forced by the dummy message. This | time, the edge is not detected by the receiver. | This small spike in CS activation is due to the fact that the spi-core activates the CS gpio before calling the driver's set_cs callback, which deactivates this gpio again until the clock polarity is correct. To avoid having to systematically send a dummy packet, the driver keeps track of the clock's current polarity. In this way, it only sends the dummy packet when necessary, ensuring that the clock will have the correct polarity when the CS is toggled. There could be two hardware problems with this patch: 1- Maybe the small CS activation peak can confuse SPI devices 2- If on a design, a single wire is used to select two devices depending on its state, the dummy message may disturb them. Fixes: 5ee36c989831 ("spi: atmel_spi update chipselect handling") Cc: <stable@vger.kernel.org> Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com> Link: https://msgid.link/r/20231204154903.11607-1-louis.chauvet@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-14net: stmmac: dwmac-qcom-ethqos: Fix drops in 10M SGMII RXSneh Shah
In 10M SGMII mode all the packets are being dropped due to wrong Rx clock. SGMII 10MBPS mode needs RX clock divider programmed to avoid drops in Rx. Update configure SGMII function with Rx clk divider programming. Fixes: 463120c31c58 ("net: stmmac: dwmac-qcom-ethqos: add support for SGMII") Tested-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Sneh Shah <quic_snehshah@quicinc.com> Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com> Link: https://lore.kernel.org/r/20231212092208.22393-1-quic_snehshah@quicinc.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-13Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-12-12 (iavf) This series contains updates to iavf driver only. Piotr reworks Flow Director states to deal with issues in restoring filters. Slawomir fixes shutdown processing as it was missing needed calls. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: Fix iavf_shutdown to call iavf_remove instead iavf_close iavf: Handle ntuple on/off based on new state machines for flow director iavf: Introduce new state machines for flow director ==================== Link: https://lore.kernel.org/r/20231212203613.513423-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-13scsi: ufs: core: Store min and max clk freq from OPP tableNitin Rawat
OPP support added by commit 72208ebe181e ("scsi: ufs: core: Add support for parsing OPP") doesn't update the min_freq and max_freq of each clock in 'struct ufs_clk_info'. But these values are used by the host drivers internally for controller configuration. When the OPP support is enabled in devicetree, these values will be 0, causing boot issues on the respective platforms. So add support to parse the min_freq and max_freq of all clocks while parsing the OPP table. Fixes: 72208ebe181e ("scsi: ufs: core: Add support for parsing OPP") Co-developed-by: Manish Pandey <quic_mapa@quicinc.com> Signed-off-by: Manish Pandey <quic_mapa@quicinc.com> Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com> Link: https://lore.kernel.org/r/20231208131331.12596-1-quic_nitirawa@quicinc.com Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13dpaa2-switch: do not ask for MDB, VLAN and FDB replayIoana Ciornei
Starting with commit 4e51bf44a03a ("net: bridge: move the switchdev object replay helpers to "push" mode") the switchdev_bridge_port_offload() helper was extended with the intention to provide switchdev drivers easy access to object addition and deletion replays. This works by calling the replay helpers with non-NULL notifier blocks. In the same commit, the dpaa2-switch driver was updated so that it passes valid notifier blocks to the helper. At that moment, no regression was identified through testing. In the meantime, the blamed commit changed the behavior in terms of which ports get hit by the replay. Before this commit, only the initial port which identified itself as offloaded through switchdev_bridge_port_offload() got a replay of all port objects and FDBs. After this, the newly joining port will trigger a replay of objects on all bridge ports and on the bridge itself. This behavior leads to errors in dpaa2_switch_port_vlans_add() when a VLAN gets installed on the same interface multiple times. The intended mechanism to address this is to pass a non-NULL ctx to the switchdev_bridge_port_offload() helper and then check it against the port's private structure. But since the driver does not have any use for the replayed port objects and FDBs until it gains support for LAG offload, it's better to fix the issue by reverting the dpaa2-switch driver to not ask for replay. The pointers will be added back when we are prepared to ignore replays on unrelated ports. Fixes: b28d580e2939 ("net: bridge: switchdev: replay all VLAN groups") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20231212164326.2753457-3-ioana.ciornei@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-13dpaa2-switch: fix size of the dma_unmapIoana Ciornei
The size of the DMA unmap was wrongly put as a sizeof of a pointer. Change the value of the DMA unmap to be the actual macro used for the allocation and the DMA map. Fixes: 1110318d83e8 ("dpaa2-switch: add tc flower hardware offload on ingress traffic") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20231212164326.2753457-2-ioana.ciornei@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-13net/mlx5e: Correct snprintf truncation handling for fw_version buffer used ↵Rahul Rameshbabu
by representors snprintf returns the length of the formatted string, excluding the trailing null, without accounting for truncation. This means that is the return value is greater than or equal to the size parameter, the fw_version string was truncated. Link: https://docs.kernel.org/core-api/kernel-api.html#c.snprintf Fixes: 1b2bd0c0264f ("net/mlx5e: Check return value of snprintf writing to fw_version buffer for representors") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-12-13net/mlx5e: Correct snprintf truncation handling for fw_version bufferRahul Rameshbabu
snprintf returns the length of the formatted string, excluding the trailing null, without accounting for truncation. This means that is the return value is greater than or equal to the size parameter, the fw_version string was truncated. Reported-by: David Laight <David.Laight@ACULAB.COM> Closes: https://lore.kernel.org/netdev/81cae734ee1b4cde9b380a9a31006c1a@AcuMS.aculab.com/ Link: https://docs.kernel.org/core-api/kernel-api.html#c.snprintf Fixes: 41e63c2baa11 ("net/mlx5e: Check return value of snprintf writing to fw_version buffer") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-12-13net/mlx5e: Fix error codes in alloc_branch_attr()Dan Carpenter
Set the error code if set_branch_dest_ft() fails. Fixes: ccbe33003b10 ("net/mlx5e: TC, Don't offload post action rule if not supported") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-12-13net/mlx5e: Fix error code in mlx5e_tc_action_miss_mapping_get()Dan Carpenter
Preserve the error code if esw_add_restore_rule() fails. Don't return success. Fixes: 6702782845a5 ("net/mlx5e: TC, Set CT miss to the specific ct action instance") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-12-13net/mlx5: Refactor mlx5_flow_destination->rep pointer to vport numVlad Buslov
Currently the destination rep pointer is only used for comparisons or to obtain vport number from it. Since it is used both during flow creation and deletion it may point to representor of another eswitch instance which can be deallocated during driver unload even when there are rules pointing to it[0]. Refactor the code to store vport number and 'valid' flag instead of the representor pointer. [0]: [176805.886303] ================================================================== [176805.889433] BUG: KASAN: slab-use-after-free in esw_cleanup_dests+0x390/0x440 [mlx5_core] [176805.892981] Read of size 2 at addr ffff888155090aa0 by task modprobe/27280 [176805.895462] CPU: 3 PID: 27280 Comm: modprobe Tainted: G B 6.6.0-rc3+ #1 [176805.896771] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [176805.898514] Call Trace: [176805.899026] <TASK> [176805.899519] dump_stack_lvl+0x33/0x50 [176805.900221] print_report+0xc2/0x610 [176805.900893] ? mlx5_chains_put_table+0x33d/0x8d0 [mlx5_core] [176805.901897] ? esw_cleanup_dests+0x390/0x440 [mlx5_core] [176805.902852] kasan_report+0xac/0xe0 [176805.903509] ? esw_cleanup_dests+0x390/0x440 [mlx5_core] [176805.904461] esw_cleanup_dests+0x390/0x440 [mlx5_core] [176805.905223] __mlx5_eswitch_del_rule+0x1ae/0x460 [mlx5_core] [176805.906044] ? esw_cleanup_dests+0x440/0x440 [mlx5_core] [176805.906822] ? xas_find_conflict+0x420/0x420 [176805.907496] ? down_read+0x11e/0x200 [176805.908046] mlx5e_tc_rule_unoffload+0xc4/0x2a0 [mlx5_core] [176805.908844] mlx5e_tc_del_fdb_flow+0x7da/0xb10 [mlx5_core] [176805.909597] mlx5e_flow_put+0x4b/0x80 [mlx5_core] [176805.910275] mlx5e_delete_flower+0x5b4/0xb70 [mlx5_core] [176805.911010] tc_setup_cb_reoffload+0x27/0xb0 [176805.911648] fl_reoffload+0x62d/0x900 [cls_flower] [176805.912313] ? mlx5e_rep_indr_block_unbind+0xd0/0xd0 [mlx5_core] [176805.913151] ? __fl_put+0x230/0x230 [cls_flower] [176805.913768] ? filter_irq_stacks+0x90/0x90 [176805.914335] ? kasan_save_stack+0x1e/0x40 [176805.914893] ? kasan_set_track+0x21/0x30 [176805.915484] ? kasan_save_free_info+0x27/0x40 [176805.916105] tcf_block_playback_offloads+0x79/0x1f0 [176805.916773] ? mlx5e_rep_indr_block_unbind+0xd0/0xd0 [mlx5_core] [176805.917647] tcf_block_unbind+0x12d/0x330 [176805.918239] tcf_block_offload_cmd.isra.0+0x24e/0x320 [176805.918953] ? tcf_block_bind+0x770/0x770 [176805.919551] ? _raw_read_unlock_irqrestore+0x30/0x30 [176805.920236] ? mutex_lock+0x7d/0xd0 [176805.920735] ? mutex_unlock+0x80/0xd0 [176805.921255] tcf_block_offload_unbind+0xa5/0x120 [176805.921909] __tcf_block_put+0xc2/0x2d0 [176805.922467] ingress_destroy+0xf4/0x3d0 [sch_ingress] [176805.923178] __qdisc_destroy+0x9d/0x280 [176805.923741] dev_shutdown+0x1c6/0x330 [176805.924295] unregister_netdevice_many_notify+0x6ef/0x1500 [176805.925034] ? netdev_freemem+0x50/0x50 [176805.925610] ? _raw_spin_lock_irq+0x7b/0xd0 [176805.926235] ? _raw_spin_lock_bh+0xe0/0xe0 [176805.926849] unregister_netdevice_queue+0x1e0/0x280 [176805.927592] ? unregister_netdevice_many+0x10/0x10 [176805.928275] unregister_netdev+0x18/0x20 [176805.928835] mlx5e_vport_rep_unload+0xc0/0x200 [mlx5_core] [176805.929608] mlx5_esw_offloads_unload_rep+0x9d/0xc0 [mlx5_core] [176805.930492] mlx5_eswitch_unload_vf_vports+0x108/0x1a0 [mlx5_core] [176805.931422] ? mlx5_eswitch_unload_sf_vport+0x50/0x50 [mlx5_core] [176805.932304] ? rwsem_down_write_slowpath+0x11f0/0x11f0 [176805.932987] mlx5_eswitch_disable_sriov+0x6f9/0xa60 [mlx5_core] [176805.933807] ? mlx5_core_disable_hca+0xe1/0x130 [mlx5_core] [176805.934576] ? mlx5_eswitch_disable_locked+0x580/0x580 [mlx5_core] [176805.935463] mlx5_device_disable_sriov+0x138/0x490 [mlx5_core] [176805.936308] mlx5_sriov_disable+0x8c/0xb0 [mlx5_core] [176805.937063] remove_one+0x7f/0x210 [mlx5_core] [176805.937711] pci_device_remove+0x96/0x1c0 [176805.938289] device_release_driver_internal+0x361/0x520 [176805.938981] ? kobject_put+0x5c/0x330 [176805.939553] driver_detach+0xd7/0x1d0 [176805.940101] bus_remove_driver+0x11f/0x290 [176805.943847] pci_unregister_driver+0x23/0x1f0 [176805.944505] mlx5_cleanup+0xc/0x20 [mlx5_core] [176805.945189] __x64_sys_delete_module+0x2b3/0x450 [176805.945837] ? module_flags+0x300/0x300 [176805.946377] ? dput+0xc2/0x830 [176805.946848] ? __kasan_record_aux_stack+0x9c/0xb0 [176805.947555] ? __call_rcu_common.constprop.0+0x46c/0xb50 [176805.948338] ? fpregs_assert_state_consistent+0x1d/0xa0 [176805.949055] ? exit_to_user_mode_prepare+0x30/0x120 [176805.949713] do_syscall_64+0x3d/0x90 [176805.950226] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [176805.950904] RIP: 0033:0x7f7f42c3f5ab [176805.951462] Code: 73 01 c3 48 8b 0d 75 a8 1b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 45 a8 1b 00 f7 d8 64 89 01 48 [176805.953710] RSP: 002b:00007fff07dc9d08 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [176805.954691] RAX: ffffffffffffffda RBX: 000055b6e91c01e0 RCX: 00007f7f42c3f5ab [176805.955691] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055b6e91c0248 [176805.956662] RBP: 000055b6e91c01e0 R08: 0000000000000000 R09: 0000000000000000 [176805.957601] R10: 00007f7f42d9eac0 R11: 0000000000000206 R12: 000055b6e91c0248 [176805.958593] R13: 0000000000000000 R14: 000055b6e91bfb38 R15: 0000000000000000 [176805.959599] </TASK> [176805.960324] Allocated by task 20490: [176805.960893] kasan_save_stack+0x1e/0x40 [176805.961463] kasan_set_track+0x21/0x30 [176805.962019] __kasan_kmalloc+0x77/0x90 [176805.962554] esw_offloads_init+0x1bb/0x480 [mlx5_core] [176805.963318] mlx5_eswitch_init+0xc70/0x15c0 [mlx5_core] [176805.964092] mlx5_init_one_devl_locked+0x366/0x1230 [mlx5_core] [176805.964902] probe_one+0x6f7/0xc90 [mlx5_core] [176805.965541] local_pci_probe+0xd7/0x180 [176805.966075] pci_device_probe+0x231/0x6f0 [176805.966631] really_probe+0x1d4/0xb50 [176805.967179] __driver_probe_device+0x18d/0x450 [176805.967810] driver_probe_device+0x49/0x120 [176805.968431] __driver_attach+0x1fb/0x490 [176805.968976] bus_for_each_dev+0xed/0x170 [176805.969560] bus_add_driver+0x21a/0x570 [176805.970124] driver_register+0x133/0x460 [176805.970684] 0xffffffffa0678065 [176805.971180] do_one_initcall+0x92/0x2b0 [176805.971744] do_init_module+0x22d/0x720 [176805.972318] load_module+0x58c3/0x63b0 [176805.972847] init_module_from_file+0xd2/0x130 [176805.973441] __x64_sys_finit_module+0x389/0x7c0 [176805.974045] do_syscall_64+0x3d/0x90 [176805.974556] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [176805.975566] Freed by task 27280: [176805.976077] kasan_save_stack+0x1e/0x40 [176805.976655] kasan_set_track+0x21/0x30 [176805.977221] kasan_save_free_info+0x27/0x40 [176805.977834] ____kasan_slab_free+0x11a/0x1b0 [176805.978505] __kmem_cache_free+0x163/0x2d0 [176805.979113] esw_offloads_cleanup_reps+0xb8/0x120 [mlx5_core] [176805.979963] mlx5_eswitch_cleanup+0x182/0x270 [mlx5_core] [176805.980763] mlx5_cleanup_once+0x9a/0x1e0 [mlx5_core] [176805.981477] mlx5_uninit_one+0xa9/0x180 [mlx5_core] [176805.982196] remove_one+0x8f/0x210 [mlx5_core] [176805.982868] pci_device_remove+0x96/0x1c0 [176805.983461] device_release_driver_internal+0x361/0x520 [176805.984169] driver_detach+0xd7/0x1d0 [176805.984702] bus_remove_driver+0x11f/0x290 [176805.985261] pci_unregister_driver+0x23/0x1f0 [176805.985847] mlx5_cleanup+0xc/0x20 [mlx5_core] [176805.986483] __x64_sys_delete_module+0x2b3/0x450 [176805.987126] do_syscall_64+0x3d/0x90 [176805.987665] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [176805.988667] Last potentially related work creation: [176805.989305] kasan_save_stack+0x1e/0x40 [176805.989839] __kasan_record_aux_stack+0x9c/0xb0 [176805.990443] kvfree_call_rcu+0x84/0xa30 [176805.990973] clean_xps_maps+0x265/0x6e0 [176805.991547] netif_reset_xps_queues.part.0+0x3f/0x80 [176805.992226] unregister_netdevice_many_notify+0xfcf/0x1500 [176805.992966] unregister_netdevice_queue+0x1e0/0x280 [176805.993638] unregister_netdev+0x18/0x20 [176805.994205] mlx5e_remove+0xba/0x1e0 [mlx5_core] [176805.994872] auxiliary_bus_remove+0x52/0x70 [176805.995490] device_release_driver_internal+0x361/0x520 [176805.996196] bus_remove_device+0x1e1/0x3d0 [176805.996767] device_del+0x390/0x980 [176805.997270] mlx5_rescan_drivers_locked.part.0+0x130/0x540 [mlx5_core] [176805.998195] mlx5_unregister_device+0x77/0xc0 [mlx5_core] [176805.998989] mlx5_uninit_one+0x41/0x180 [mlx5_core] [176805.999719] remove_one+0x8f/0x210 [mlx5_core] [176806.000387] pci_device_remove+0x96/0x1c0 [176806.000938] device_release_driver_internal+0x361/0x520 [176806.001612] unbind_store+0xd8/0xf0 [176806.002108] kernfs_fop_write_iter+0x2c0/0x440 [176806.002748] vfs_write+0x725/0xba0 [176806.003294] ksys_write+0xed/0x1c0 [176806.003823] do_syscall_64+0x3d/0x90 [176806.004357] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [176806.005317] The buggy address belongs to the object at ffff888155090a80 which belongs to the cache kmalloc-64 of size 64 [176806.006774] The buggy address is located 32 bytes inside of freed 64-byte region [ffff888155090a80, ffff888155090ac0) [176806.008773] The buggy address belongs to the physical page: [176806.009480] page:00000000a407e0e6 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x155090 [176806.010633] flags: 0x200000000000800(slab|node=0|zone=2) [176806.011352] page_type: 0xffffffff() [176806.011905] raw: 0200000000000800 ffff888100042640 ffffea000422b1c0 dead000000000004 [176806.012949] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 [176806.013933] page dumped because: kasan: bad access detected [176806.014935] Memory state around the buggy address: [176806.015601] ffff888155090980: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [176806.016568] ffff888155090a00: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [176806.017497] >ffff888155090a80: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [176806.018438] ^ [176806.019007] ffff888155090b00: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [176806.020001] ffff888155090b80: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [176806.020996] ================================================================== Fixes: a508728a4c8b ("net/mlx5e: VF tunnel RX traffic offloading") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-12-13net/mlx5: Fix fw tracer first block checkMoshe Shemesh
While handling new traces, to verify it is not the first block being written, last_timestamp is checked. But instead of checking it is non zero it is verified to be zero. Fix to verify last_timestamp is not zero. Fixes: c71ad41ccb0c ("net/mlx5: FW tracer, events handling") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Feras Daoud <ferasda@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-12-13net/mlx5e: XDP, Drop fragmented packets larger than MTU sizeCarolina Jubran
XDP transmits fragmented packets that are larger than MTU size instead of dropping those packets. The drop check that checks whether a packet is larger than MTU is comparing MTU size against the linear part length only. Adjust the drop check to compare MTU size against both linear and non-linear part lengths to avoid transmitting fragmented packets larger than MTU size. Fixes: 39a1665d16a2 ("net/mlx5e: Implement sending multi buffer XDP frames") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-12-13net/mlx5e: Decrease num_block_tc when unblock tc offloadChris Mi
The cited commit increases num_block_tc when unblock tc offload. Actually should decrease it. Fixes: c8e350e62fc5 ("net/mlx5e: Make TC and IPsec offloads mutually exclusive on a netdev") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-12-13net/mlx5e: Fix overrun reported by coverityJianbo Liu
Coverity Scan reports the following issue. But it's impossible that mlx5_get_dev_index returns 7 for PF, even if the index is calculated from PCI FUNC ID. So add the checking to make coverity slience. CID 610894 (#2 of 2): Out-of-bounds write (OVERRUN) Overrunning array esw->fdb_table.offloads.peer_miss_rules of 4 8-byte elements at element index 7 (byte offset 63) using index mlx5_get_dev_index(peer_dev) (which evaluates to 7). Fixes: 9bee385a6e39 ("net/mlx5: E-switch, refactor FDB miss rule add/remove") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-12-13net/mlx5e: fix a potential double-free in fs_udp_create_groupsDinghao Liu
When kcalloc() for ft->g succeeds but kvzalloc() for in fails, fs_udp_create_groups() will free ft->g. However, its caller fs_udp_create_table() will free ft->g again through calling mlx5e_destroy_flow_table(), which will lead to a double-free. Fix this by setting ft->g to NULL in fs_udp_create_groups(). Fixes: 1c80bd684388 ("net/mlx5e: Introduce Flow Steering UDP API") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-12-13net/mlx5e: Fix a race in command alloc flowShifeng Li
Fix a cmd->ent use after free due to a race on command entry. Such race occurs when one of the commands releases its last refcount and frees its index and entry while another process running command flush flow takes refcount to this command entry. The process which handles commands flush may see this command as needed to be flushed if the other process allocated a ent->idx but didn't set ent to cmd->ent_arr in cmd_work_handler(). Fix it by moving the assignment of cmd->ent_arr into the spin lock. [70013.081955] BUG: KASAN: use-after-free in mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core] [70013.081967] Write of size 4 at addr ffff88880b1510b4 by task kworker/26:1/1433361 [70013.081968] [70013.082028] Workqueue: events aer_isr [70013.082053] Call Trace: [70013.082067] dump_stack+0x8b/0xbb [70013.082086] print_address_description+0x6a/0x270 [70013.082102] kasan_report+0x179/0x2c0 [70013.082173] mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core] [70013.082267] mlx5_cmd_flush+0x80/0x180 [mlx5_core] [70013.082304] mlx5_enter_error_state+0x106/0x1d0 [mlx5_core] [70013.082338] mlx5_try_fast_unload+0x2ea/0x4d0 [mlx5_core] [70013.082377] remove_one+0x200/0x2b0 [mlx5_core] [70013.082409] pci_device_remove+0xf3/0x280 [70013.082439] device_release_driver_internal+0x1c3/0x470 [70013.082453] pci_stop_bus_device+0x109/0x160 [70013.082468] pci_stop_and_remove_bus_device+0xe/0x20 [70013.082485] pcie_do_fatal_recovery+0x167/0x550 [70013.082493] aer_isr+0x7d2/0x960 [70013.082543] process_one_work+0x65f/0x12d0 [70013.082556] worker_thread+0x87/0xb50 [70013.082571] kthread+0x2e9/0x3a0 [70013.082592] ret_from_fork+0x1f/0x40 The logical relationship of this error is as follows: aer_recover_work | ent->work -------------------------------------------+------------------------------ aer_recover_work_func | |- pcie_do_recovery | |- report_error_detected | |- mlx5_pci_err_detected |cmd_work_handler |- mlx5_enter_error_state | |- cmd_alloc_index |- enter_error_state | |- lock cmd->alloc_lock |- mlx5_cmd_flush | |- clear_bit |- mlx5_cmd_trigger_completions| |- unlock cmd->alloc_lock |- lock cmd->alloc_lock | |- vector = ~dev->cmd.vars.bitmask |- for_each_set_bit | |- cmd_ent_get(cmd->ent_arr[i]) (UAF) |- unlock cmd->alloc_lock | |- cmd->ent_arr[ent->idx]=ent The cmd->ent_arr[ent->idx] assignment and the bit clearing are not protected by the cmd->alloc_lock in cmd_work_handler(). Fixes: 50b2412b7e78 ("net/mlx5: Avoid possible free of command entry while timeout comp handler") Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-12-13net/mlx5e: Fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list()Shifeng Li
Out_sz that the size of out buffer is calculated using query_nic_vport _context_in structure when driver query the MAC list. However query_nic _vport_context_in structure is smaller than query_nic_vport_context_out. When allowed_list_size is greater than 96, calling ether_addr_copy() will trigger an slab-out-of-bounds. [ 1170.055866] BUG: KASAN: slab-out-of-bounds in mlx5_query_nic_vport_mac_list+0x481/0x4d0 [mlx5_core] [ 1170.055869] Read of size 4 at addr ffff88bdbc57d912 by task kworker/u128:1/461 [ 1170.055870] [ 1170.055932] Workqueue: mlx5_esw_wq esw_vport_change_handler [mlx5_core] [ 1170.055936] Call Trace: [ 1170.055949] dump_stack+0x8b/0xbb [ 1170.055958] print_address_description+0x6a/0x270 [ 1170.055961] kasan_report+0x179/0x2c0 [ 1170.056061] mlx5_query_nic_vport_mac_list+0x481/0x4d0 [mlx5_core] [ 1170.056162] esw_update_vport_addr_list+0x2c5/0xcd0 [mlx5_core] [ 1170.056257] esw_vport_change_handle_locked+0xd08/0x1a20 [mlx5_core] [ 1170.056377] esw_vport_change_handler+0x6b/0x90 [mlx5_core] [ 1170.056381] process_one_work+0x65f/0x12d0 [ 1170.056383] worker_thread+0x87/0xb50 [ 1170.056390] kthread+0x2e9/0x3a0 [ 1170.056394] ret_from_fork+0x1f/0x40 Fixes: e16aea2744ab ("net/mlx5: Introduce access functions to modify/query vport mac lists") Cc: Ding Hui <dinghui@sangfor.com.cn> Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-12-13net/mlx5e: fix double free of encap_headerVlad Buslov
Cited commit introduced potential double free since encap_header can be destroyed twice in some cases - once by error cleanup sequence in mlx5e_tc_tun_{create|update}_header_ipv{4|6}(), once by generic mlx5e_encap_put() that user calls as a result of getting an error from tunnel create|update. At the same time the point where e->encap_header is assigned can't be delayed because the function can still return non-error code 0 as a result of checking for NUD_VALID flag, which will cause neighbor update to dereference NULL encap_header. Fix the issue by: - Nulling local encap_header variables in mlx5e_tc_tun_{create|update}_header_ipv{4|6}() to make kfree(encap_header) call in error cleanup sequence noop after that point. - Assigning reformat_params.data from e->encap_header instead of local variable encap_header that was set to NULL pointer by previous step. Also assign reformat_params.size from e->encap_size for uniformity and in order to make the code less error-prone in the future. Fixes: d589e785baf5 ("net/mlx5e: Allow concurrent creation of encap entries") Reported-by: Dust Li <dust.li@linux.alibaba.com> Reported-by: Cruz Zhao <cruzzhao@linux.alibaba.com> Reported-by: Tianchen Ding <dtcccc@linux.alibaba.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-12-13Revert "net/mlx5e: fix double free of encap_header"Vlad Buslov
This reverts commit 6f9b1a0731662648949a1c0587f6acb3b7f8acf1. This patch is causing a null ptr issue, the proper fix is in the next patch. Fixes: 6f9b1a073166 ("net/mlx5e: fix double free of encap_header") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-12-13Revert "net/mlx5e: fix double free of encap_header in update funcs"Vlad Buslov
This reverts commit 3a4aa3cb83563df942be49d145ee3b7ddf17d6bb. This patch is causing a null ptr issue, the proper fix is in the next patch. Fixes: 3a4aa3cb8356 ("net/mlx5e: fix double free of encap_header in update funcs") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-12-13Merge tag 'v6.7-rockchip-clkfixes1' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-fixes Pull Rockchip clk driver fixes for the merge window from Heiko Stuebner: Fixes for a wrong clockname, a wrong clock-parent, a wrong clock-gate and finally one new PLL rate for the rk3568 to fix display artifacts on a handheld devices based on that soc. * tag 'v6.7-rockchip-clkfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: rk3128: Fix SCLK_SDMMC's clock name clk: rockchip: rk3128: Fix aclk_peri_src's parent clk: rockchip: rk3128: Fix HCLK_OTG gate register clk: rockchip: rk3568: Add PLL rate for 292.5MHz
2023-12-13drm/amdgpu: warn when there are still mappings when a BO is destroyed v2Christian König
This can only happen when there is a reference counting bug. v2: fix typo Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/amdgpu: fix tear down order in amdgpu_vm_pt_freeChristian König
When freeing PD/PT with shadows it can happen that the shadow destruction races with detaching the PD/PT from the VM causing a NULL pointer dereference in the invalidation code. Fix this by detaching the the PD/PT from the VM first and then freeing the shadow instead. Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: https://gitlab.freedesktop.org/drm/amd/-/issues/2867 Cc: <stable@vger.kernel.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/amd: Fix a probing order problem on SDMA 2.4Mario Limonciello
commit 751e293f2c99 ("drm/amd: Move microcode init from sw_init to early_init for SDMA v2.4") made a fateful mistake in `adev->sdma.num_instances` wasn't declared when sdma_v2_4_init_microcode() was run. This caused probing to fail. Move the declaration to right before sdma_v2_4_init_microcode(). Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3043 Fixes: 751e293f2c99 ("drm/amd: Move microcode init from sw_init to early_init for SDMA v2.4") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/amdgpu/sdma5.2: add begin/end_use ring callbacksAlex Deucher
Add begin/end_use ring callbacks to disallow GFXOFF when SDMA work is submitted and allow it again afterward. This should avoid corner cases where GFXOFF is erroneously entered when SDMA is still active. For now just allow/disallow GFXOFF in the begin and end helpers until we root cause the issue. This should not impact power as SDMA usage is pretty minimal and GFXOSS should not be active when SDMA is active anyway, this just makes it explicit. v2: move everything into sdma5.2 code. No reason for this to be generic at this point. v3: Add comments in new code Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2220 Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> (v1) Tested-by: Mario Limonciello <mario.limonciello@amd.com> (v1) Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.15+
2023-12-13Merge tag 'efi-urgent-for-v6.7-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fixes from Ard Biesheuvel: - Deal with a regression in the recently refactored x86 EFI stub code on older Dell systems by disabling randomization of the physical load address - Use the correct load address for relocatable Loongarch kernels * tag 'efi-urgent-for-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi/x86: Avoid physical KASLR on older Dell systems efi/loongarch: Use load address to calculate kernel entry address
2023-12-13i40e: Fix ST code value for Clause 45Ivan Vecera
ST code value for clause 45 that has been changed by commit 8196b5fd6c73 ("i40e: Refactor I40E_MDIO_CLAUSE* macros") is currently wrong. The mentioned commit refactored ..MDIO_CLAUSE??_STCODE_MASK so their value is the same for both clauses. The value is correct for clause 22 but not for clause 45. Fix the issue by adding a parameter to I40E_GLGEN_MSCA_STCODE_MASK macro that specifies required value. Fixes: 8196b5fd6c73 ("i40e: Refactor I40E_MDIO_CLAUSE* macros") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-13ice: fix theoretical out-of-bounds access in ethtool link modesMichal Schmidt
To map phy types reported by the hardware to ethtool link mode bits, ice uses two lookup tables (phy_type_low_lkup, phy_type_high_lkup). The "low" table has 64 elements to cover every possible bit the hardware may report, but the "high" table has only 13. If the hardware reports a higher bit in phy_types_high, the driver would access memory beyond the lookup table's end. Instead of iterating through all 64 bits of phy_types_{low,high}, use the sizes of the respective lookup tables. Fixes: 9136e1f1e5c3 ("ice: refactor PHY type to ethtool link mode") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-13drm/panel: ltk050h3146w: Set burst mode for ltk050h3148wFarouk Bouabid
The ltk050h3148w variant expects the horizontal component lane byte clock cycle(lbcc) to be calculated using lane_mbps (burst mode) instead of the pixel clock. Using the pixel clock rate by default for this calculation was introduced in commit ac87d23694f4 ("drm/bridge: synopsys: dw-mipi-dsi: Use pixel clock rate to calculate lbcc") and starting from commit 93e82bb4de01 ("drm/bridge: synopsys: dw-mipi-dsi: Fix hcomponent lbcc for burst mode") only panels that support burst mode can keep using the lane_mbps. So add MIPI_DSI_MODE_VIDEO_BURST as part of the mode_flags for the dsi host. Fixes: 93e82bb4de01 ("drm/bridge: synopsys: dw-mipi-dsi: Fix hcomponent lbcc for burst mode") Signed-off-by: Farouk Bouabid <farouk.bouabid@theobroma-systems.com> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20231213145045.41020-1-farouk.bouabid@theobroma-systems.com
2023-12-13drivers/perf: add DesignWare PCIe PMU driverShuai Xue
This commit adds the PCIe Performance Monitoring Unit (PMU) driver support for T-Head Yitian SoC chip. Yitian is based on the Synopsys PCI Express Core controller IP which provides statistics feature. The PMU is a PCIe configuration space register block provided by each PCIe Root Port in a Vendor-Specific Extended Capability named RAS D.E.S (Debug, Error injection, and Statistics). To facilitate collection of statistics the controller provides the following two features for each Root Port: - one 64-bit counter for Time Based Analysis (RX/TX data throughput and time spent in each low-power LTSSM state) and - one 32-bit counter for Event Counting (error and non-error events for a specified lane) Note: There is no interrupt for counter overflow. This driver adds PMU devices for each PCIe Root Port. And the PMU device is named based the BDF of Root Port. For example, 30:03.0 PCI bridge: Device 1ded:8000 (rev 01) the PMU device name for this Root Port is dwc_rootport_3018. Example usage of counting PCIe RX TLP data payload (Units of bytes):: $# perf stat -a -e dwc_rootport_3018/Rx_PCIe_TLP_Data_Payload/ average RX bandwidth can be calculated like this: PCIe TX Bandwidth = Rx_PCIe_TLP_Data_Payload / Measure_Time_Window Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Link: https://lore.kernel.org/r/20231208025652.87192-5-xueshuai@linux.alibaba.com [will: Fix sparse error due to use of uninitialised 'vsec' symbol in dwc_pcie_match_des_cap()] Signed-off-by: Will Deacon <will@kernel.org>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-08-01 20:04:02 +0000