Age | Commit message (Collapse) | Author |
|
By default, CMN has automatic clock-gating with the implication that
a DTC's cycle counter may not increment while the DTC is sufficiently
idle. Given that we may have up to 4 DTCs to choose from when scheduling
a cycles event, this may potentially lead to surprising results if
trying to measure metrics based on activity in a different DTC domain
from where cycles end up being counted. Furthermore, since the details
of internal clock gating are not documented, we can't even reason about
what "active" cycles for a DTC actually mean relative to the activity of
other nodes within the same nominal DTC domain.
Make the reasonable assumption that if the user wants to count cycles,
they almost certainly want to count all of the cycles, and disable clock
gating while a DTC's cycle counter is in use.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/c47cfdc09e907b1d7753d142a7e659982cceb246.1725296395.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
These days we can use static_assert() in the logical place rather than
jamming a BUILD_BUG_ON() into the nearest function scope.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/224ee8286f299100f1c768edb254edc898539f50.1725296395.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
While CMN_MAX_DIMENSION was bumped to 12 for CMN-650, that only supports
up to a 10x10 mesh, so bumping dtm_idx to 256 bits at the time worked
out OK in practice. However CMN-700 did finally support up to 144 XPs,
and thus needs a worst-case 288 bits of dtm_idx for an aggregated XP
event on a maxed-out config. Oops.
Fixes: 23760a014417 ("perf/arm-cmn: Add CMN-700 support")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/e771b358526a0d7fc06efee2c3a2fdc0c9f51d44.1725296395.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Apparently pmu_event_sel is offset by 8 for all CCLA nodes, not just
the CCLA_RNI combination type.
Fixes: 23760a014417 ("perf/arm-cmn: Add CMN-700 support")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/6e7bb06fef6046f83e7647aad0e5be544139763f.1725296395.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The scope of the "extra device ports" configuration is not made clear by
the CMN documentation - so far we've assumed it applies globally, based
on the sole example which suggests as much. However it transpires that
this is incorrect, and the format does in fact vary based on each
individual XP's port configuration. As a consequence, we're currenly
liable to decode the port/device indices from a node ID incorrectly,
thus program the wrong event source in the DTM leading to bogus event
counts, and also show device topology on the wrong ports in debugfs.
To put this right, rework node IDs yet again to carry around the
additional data necessary to decode them properly per-XP. At this point
the notion of fully decomposing an ID becomes more impractical than it's
worth, so unabstracting the XY mesh coordinates (where 2/3 users were
just debug anyway) ends up leaving things a bit simpler overall.
Fixes: 60d1504070c2 ("perf/arm-cmn: Support new IP features")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/5195f990152fc37adba5fbf5929a6b11063d9f09.1725296395.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently users can get the Root Ports supported by the PCIe PMU by
"bus" sysfs attributes which indicates the PCIe bus number where
Root Ports are located. This maybe insufficient since Root Ports
supported by different PCIe PMUs may be located on the same PCIe bus.
So export the BDF range the Root Ports additionally.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240829090332.28756-4-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
We make the initial value of event ctrl register as HISI_PCIE_INIT_SET
and modify according to the user options. This will make TLP headers
bandwidth only counting never take effect since HISI_PCIE_INIT_SET
configures to count the TLP payloads bandwidth. Fix this by making
the initial value of event ctrl register as 0.
Fixes: 17d573984d4d ("drivers/perf: hisi: Add TLP filter support")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240829090332.28756-3-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently we set the period and record it as the initial value of the
counter without checking it's set to the hardware successfully or not.
However the counter maybe unwritable if the target event is unsupported
by the device. In such case we will pass user a wrong count:
[start counts when setting the period]
hwc->prev_count = 0x8000000000000000
device.counter_value = 0 // the counter is not set as the period
[when user reads the counter]
event->count = device.counter_value - hwc->prev_count
= 0x8000000000000000 // wrong. should be 0.
Fix this by record the hardware counter counts correctly when setting
the period.
Fixes: 8404b0fbc7fb ("drivers/perf: hisi: Add driver for HiSilicon PCIe PMU")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240829090332.28756-2-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Use perf_allow_kernel() for 'pa_enable' (physical addresses),
'pct_enable' (physical timestamps) and context IDs. This means that
perf_event_paranoid is now taken into account and LSM hooks can be used,
which is more consistent with other perf_event_open calls. For example
PERF_SAMPLE_PHYS_ADDR uses perf_allow_kernel() rather than just
perfmon_capable().
This also indirectly fixes the following error message which is
misleading because perf_event_paranoid is not taken into account by
perfmon_capable():
$ perf record -e arm_spe/pa_enable/
Error:
Access to performance monitoring and observability operations is
limited. Consider adjusting /proc/sys/kernel/perf_event_paranoid
setting ...
Suggested-by: Al Grant <al.grant@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240827145113.1224604-1-james.clark@linaro.org
Link: https://lore.kernel.org/all/20240807120039.GD37996@noisy.programming.kicks-ass.net/
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Update the vendor table with QCOM PCIe vendorid.
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240816-dwc_pmu_fix-v2-4-198b8ab1077c@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When the PCIe devices are discovered late, the driver can't find
the PCIe devices and returns in the init without registering with
the bus notifier. Due to that the devices which are discovered late
the driver can't register for this.
Register for bus notifier & driver even if the device is not found
as part of init.
Fixes: af9597adc2f1 ("drivers/perf: add DesignWare PCIe PMU driver")
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240816-dwc_pmu_fix-v2-3-198b8ab1077c@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When there are multiple of instances of PCIe controllers, registration
to perf driver fails with this error.
sysfs: cannot create duplicate filename '/devices/platform/dwc_pcie_pmu.0'
CPU: 0 PID: 166 Comm: modprobe Not tainted 6.10.0-rc2-next-20240607-dirty
Hardware name: Qualcomm SA8775P Ride (DT)
Call trace:
dump_backtrace.part.8+0x98/0xf0
show_stack+0x14/0x1c
dump_stack_lvl+0x74/0x88
dump_stack+0x14/0x1c
sysfs_warn_dup+0x60/0x78
sysfs_create_dir_ns+0xe8/0x100
kobject_add_internal+0x94/0x224
kobject_add+0xa8/0x118
device_add+0x298/0x7b4
platform_device_add+0x1a0/0x228
platform_device_register_full+0x11c/0x148
dwc_pcie_register_dev+0x74/0xf0 [dwc_pcie_pmu]
dwc_pcie_pmu_init+0x7c/0x1000 [dwc_pcie_pmu]
do_one_initcall+0x58/0x1c0
do_init_module+0x58/0x208
load_module+0x1804/0x188c
__do_sys_init_module+0x18c/0x1f0
__arm64_sys_init_module+0x14/0x1c
invoke_syscall+0x40/0xf8
el0_svc_common.constprop.1+0x70/0xf4
do_el0_svc+0x18/0x20
el0_svc+0x28/0xb0
el0t_64_sync_handler+0x9c/0xc0
el0t_64_sync+0x160/0x164
kobject: kobject_add_internal failed for dwc_pcie_pmu.0 with -EEXIST,
don't try to register things with the same name in the same directory.
This is because of having same bdf value for devices under two different
controllers.
Update the logic to use sbdf which is a unique number in case of
multi instance also.
Fixes: af9597adc2f1 ("drivers/perf: add DesignWare PCIe PMU driver")
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240816-dwc_pmu_fix-v2-1-198b8ab1077c@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The alibaba_uncore_pmu driver forgot to clear all interrupt status
in the interrupt processing function. After the PMU counter overflow
interrupt occurred, an interrupt storm occurred, causing the system
to hang.
Therefore, clear the correct interrupt status in the interrupt handling
function to fix it.
Fixes: cf7b61073e45 ("drivers/perf: add DDR Sub-System Driveway PMU driver for Yitian 710 SoC")
Signed-off-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1724297611-20686-1-git-send-email-renyu.zj@linux.alibaba.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This patch adds known PMU events that can be found on /usr/share/kpep in
macOS. The m1_pmu_events and m1_pmu_event_affinity are generated from
the script [1], which consumes the plist file from Apple. And then added
these events to m1_pmu_perf_map and m1_pmu_event_attrs with Apple's
documentation [2].
Link: https://github.com/cyyself/m1-pmu-gen [1]
Link: https://developer.apple.com/download/apple-silicon-cpu-optimization-guide/ [2]
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Acked-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/tencent_C5DA658E64B8D13125210C8D707CD8823F08@qq.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Armv9.4/8.9 PMU adds optional support for a fixed instruction counter
similar to the fixed cycle counter. Support for the feature is indicated
in the ID_AA64DFR1_EL1 register PMICNTR field. The counter is not
accessible in AArch32.
Existing userspace using direct counter access won't know how to handle
the fixed instruction counter, so we have to avoid using the counter
when user access is requested.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240731-arm-pmu-3-9-icntr-v3-7-280a8d7ff465@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The PMUv3 and KVM code each have a define for the PMU cycle counter
index. Move KVM's define to a shared location and use it for PMUv3
driver.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240731-arm-pmu-3-9-icntr-v3-5-280a8d7ff465@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Various PMUv3 registers which are a mask of counters are 64-bit
registers, but the accessor functions take a u32. This has been fine as
the upper 32-bits have been RES0 as there has been a maximum of 32
counters prior to Armv9.4/8.9. With Armv9.4/8.9, a 33rd counter is
added. Update the accessor functions to use a u64 instead.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240731-arm-pmu-3-9-icntr-v3-2-280a8d7ff465@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Xscale and Armv6 PMUs defined the cycle counter at 0 and event counters
starting at 1 and had 1:1 event index to counter numbering. On Armv7 and
later, this changed the cycle counter to 31 and event counters start at
0. The drivers for Armv7 and PMUv3 kept the old event index numbering
and introduced an event index to counter conversion. The conversion uses
masking to convert from event index to a counter number. This operation
relies on having at most 32 counters so that the cycle counter index 0
can be transformed to counter number 31.
Armv9.4 adds support for an additional fixed function counter
(instructions) which increases possible counters to more than 32, and
the conversion won't work anymore as a simple subtract and mask. The
primary reason for the translation (other than history) seems to be to
have a contiguous mask of counters 0-N. Keeping that would result in
more complicated index to counter conversions. Instead, store a mask of
available counters rather than just number of events. That provides more
information in addition to the number of events.
No (intended) functional changes.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240731-arm-pmu-3-9-icntr-v3-1-280a8d7ff465@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Use of_property_present() to test for property presence rather than
of_find_property(). This is part of a larger effort to remove callers
of of_find_property() and similar functions. of_find_property() leaks
the DT struct property and data pointers which is a problem for
dynamically allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20240731191312.1710417-15-robh@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Three small fixes for interrupt core and drivers:
- The interrupt core fails to honor caller supplied affinity hints
for non-managed interrupts and uses the system default affinity on
startup instead. Set the missing flag in the descriptor to tell the
core to use the provided affinity.
- Fix a shift out of bounds error in the Xilinx driver
- Handle switching to level trigger correctly in the RISCV APLIC
driver. It failed to retrigger the interrupt which causes it to
become stale"
* tag 'irq-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/riscv-aplic: Retrigger MSI interrupt on source configuration
irqchip/xilinx: Fix shift out of bounds
genirq/irqdesc: Honor caller provided affinity in alloc_desc()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for reported issues for
6.11-rc3. Included in here are:
- usb serial driver MODULE_DESCRIPTION() updates
- usb serial driver fixes
- typec driver fixes
- usb-ip driver fix
- gadget driver fixes
- dt binding update
All of these have been in linux-next with no reported issues"
* tag 'usb-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix a deadlock in ucsi_send_command_common()
usb: typec: tcpm: avoid sink goto SNK_UNATTACHED state if not received source capability message
usb: gadget: f_fs: pull out f->disable() from ffs_func_set_alt()
usb: gadget: f_fs: restore ffs_func_disable() functionality
USB: serial: debug: do not echo input by default
usb: typec: tipd: Delete extra semi-colon
usb: typec: tipd: Fix dereferencing freeing memory in tps6598x_apply_patch()
usb: gadget: u_serial: Set start_delayed during suspend
usb: typec: tcpci: Fix error code in tcpci_check_std_output_cap()
usb: typec: fsa4480: Check if the chip is really there
usb: gadget: core: Check for unset descriptor
usb: vhci-hcd: Do not drop references before new references are gained
usb: gadget: u_audio: Check return codes from usb_ep_enable and config_ep_by_speed.
usb: gadget: midi2: Fix the response for FB info with block 0xff
dt-bindings: usb: microchip,usb2514: Add USB2517 compatible
USB: serial: garmin_gps: use struct_size() to allocate pkt
USB: serial: garmin_gps: annotate struct garmin_packet with __counted_by
USB: serial: add missing MODULE_DESCRIPTION() macros
USB: serial: spcp8x5: remove unused struct 'spcp8x5_usb_ctrl_arg'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for reported problems
for 6.11-rc3. Included in here are:
- sc16is7xx serial driver fixes
- uartclk bugfix for a divide by zero issue
- conmakehash userspace build issue fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: vt: conmakehash: cope with abs_srctree no longer in env
serial: sc16is7xx: fix invalid FIFO access with special register set
serial: sc16is7xx: fix TX fifo corruption
serial: core: check uartclk for zero to avoid divide by zero
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core / documentation fixes from Greg KH:
"Here are some small fixes, and some documentation updates for
6.11-rc3. Included in here are:
- embargoed hardware documenation updates based on a lot of review by
legal-types in lots of companies to try to make the process a _bit_
easier for us to manage over time.
- rust firmware documentation fix
- driver detach race fix for the fix that went into 6.11-rc1
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Fix uevent_show() vs driver detach race
Documentation: embargoed-hardware-issues.rst: add a section documenting the "early access" process
Documentation: embargoed-hardware-issues.rst: minor cleanups and fixes
rust: firmware: fix invalid rustdoc link
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are some small char/misc/other driver fixes for 6.11-rc3 for
reported issues. Included in here are:
- binder driver fixes
- fsi MODULE_DESCRIPTION() additions (people seem to love them...)
- eeprom driver fix
- Kconfig dependency fix to resolve build issues
- spmi driver fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
spmi: pmic-arb: add missing newline in dev_err format strings
spmi: pmic-arb: Pass the correct of_node to irq_domain_add_tree
binder_alloc: Fix sleeping function called from invalid context
binder: fix descriptor lookup for context manager
char: add missing NetWinder MODULE_DESCRIPTION() macros
misc: mrvl-cn10k-dpi: add PCI_IOV dependency
eeprom: ee1004: Fix locking issues in ee1004_probe()
fsi: add missing MODULE_DESCRIPTION() macros
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two core fixes: one to prevent discard type changes (seen on iSCSI)
during intermittent errors and the other is fixing a lockdep problem
caused by the queue limits change.
And one driver fix in ufs"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Keep the discard mode stable
scsi: sd: Move sd_read_cpr() out of the q->limits_lock region
scsi: ufs: core: Fix hba->last_dme_cmd_tstamp timestamp updating logic
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- Two fixes for SMBusAlert handling in the I2C core: one to avoid an
endless loop when scanning for handlers and one to make sure handlers
are always called even if HW has broken behaviour
- I2C header build fix for when ACPI is enabled but I2C isn't
- The testunit gets a rename in the code to match the documentation
- Two fixes for the Qualcomm GENI I2C controller are cleaning up the
error exit patch in the runtime_resume() function. The first is
disabling the clock, the second disables the icc on the way out
* tag 'i2c-for-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: testunit: match HostNotify test name with docs
i2c: qcom-geni: Add missing geni_icc_disable in geni_i2c_runtime_resume
i2c: qcom-geni: Add missing clk_disable_unprepare in geni_i2c_runtime_resume
i2c: Fix conditional for substituting empty ACPI functions
i2c: smbus: Send alert notifications to all devices if source not found
i2c: smbus: Improve handling of stuck alerts
|
|
The section 4.5.2 of the RISC-V AIA specification says that "any write
to a sourcecfg register of an APLIC might (or might not) cause the
corresponding interrupt-pending bit to be set to one if the rectified
input value is high (= 1) under the new source mode."
When the interrupt type is changed in the sourcecfg register, the APLIC
device might not set the corresponding pending bit, so the interrupt might
never become pending.
To handle sourcecfg register changes for level-triggered interrupts in MSI
mode, manually set the pending bit for retriggering interrupt so it gets
retriggered if it was already asserted.
Fixes: ca8df97fe679 ("irqchip/riscv-aplic: Add support for MSI-mode")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240809071049.2454-1-yongxuan.wang@sifive.com
|
|
The device tree property 'xlnx,kind-of-intr' is sanity checked that the
bitmask contains only set bits which are in the range of the number of
interrupts supported by the controller.
The check is done by shifting the mask right by the number of supported
interrupts and checking the result for zero.
The data type of the mask is u32 and the number of supported interrupts is
up to 32. In case of 32 interrupts the shift is out of bounds, resulting in
a mismatch warning. The out of bounds condition is also reported by UBSAN:
UBSAN: shift-out-of-bounds in irq-xilinx-intc.c:332:22
shift exponent 32 is too large for 32-bit type 'unsigned int'
Fix it by promoting the mask to u64 for the test.
Fixes: d50466c90724 ("microblaze: intc: Refactor DT sanity check")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/1723186944-3571957-1-git-send-email-radhey.shyam.pandey@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few SPI fixes: clock rate calculation fixes for the Kunpeng and lpsi
drivers and a missing registration of a device ID for spidev (which
had only been updated for DT cases, causing warnings)"
* tag 'spi-fix-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-fsl-lpspi: Fix scldiv calculation
spi: spidev: Add missing spi_device_id for bh2228fv
spi: hisi-kunpeng: Add verification for the max_frequency provided by the firmware
spi: hisi-kunpeng: Add validation for the minimum value of speed_hz
|
|
Pull drm fixes from Dave Airlie:
"Weekly regular fixes, mostly amdgpu with i915/xe having a few each,
and then some misc bits across the board, seems about right for rc3
time.
client:
- fix null ptr deref
bridge:
- connector: fix double free
atomic:
- fix async flip update
panel:
- document panel
omap:
- add config dependency
tests:
- fix gem shmem test
drm buddy:
- Add start address to trim function
amdgpu:
- DMCUB fix
- Fix DET programming on some DCNs
- DCC fixes
- DCN 4.0.1 fixes
- SMU 14.0.x update
- MMHUB fix
- DCN 3.1.4 fix
- GC 12.0 fixes
- Fix soft recovery error propogation
- SDMA 7.0 fixes
- DSC fix
xe:
- Fix off-by-one when processing RTP rules
- Use dma_fence_chain_free in chain fence unused as a sync
- Fix PL1 disable flow in xe_hwmon_power_max_write
- Take ref to VM in delayed dump snapshot
i915:
- correct dual pps handling for MTL_PCH+ [display]
- Adjust vma offset for framebuffer mmap offset [gem]
- Fix Virtual Memory mapping boundaries calculation [gem]
- Allow evicting to use the requested placement
- Attempt to get pages without eviction first"
* tag 'drm-fixes-2024-08-10' of https://gitlab.freedesktop.org/drm/kernel: (31 commits)
drm/xe: Take ref to VM in delayed snapshot
drm/xe/hwmon: Fix PL1 disable flow in xe_hwmon_power_max_write
drm/xe: Use dma_fence_chain_free in chain fence unused as a sync
drm/xe/rtp: Fix off-by-one when processing rules
drm/amdgpu: Add DCC GFX12 flag to enable address alignment
drm/amdgpu: correct sdma7 max dw
drm/amdgpu: Add address alignment support to DCC buffers
drm/amd/display: Skip Recompute DSC Params if no Stream on Link
drm/amdgpu: change non-dcc buffer copy configuration
drm/amdgpu: Forward soft recovery errors to userspace
drm/amdgpu: add golden setting for gc v12
drm/buddy: Add start address support to trim function
drm/amd/display: Add missing program DET segment call to pipe init
drm/amd/display: Add missing DCN314 to the DML Makefile
drm/amdgpu: force to use legacy inv in mmhub
drm/amd/pm: update powerplay structure on smu v14.0.2/3
drm/amd/display: Add missing mcache registers
drm/amd/display: Add dcc propagation value
drm/amd/display: Add missing DET segments programming
drm/amd/display: Replace dm_execute_dmub_cmd with dc_wake_and_execute_dmub_cmd
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Change the default EPP (energy-performence preference) value for the
Emerald Rapids processor in the intel_pstate driver.
Thisshould improve both the performance and energy efficiency (Pedro
Henrique Kopper)"
* tag 'pm-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Update Balance performance EPP for Emerald Rapids
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are three sets of patches for the soc tree:
- Marek Behún addresses multiple build time regressions caused by
changes to the cznic turris-omnia support
- Dmitry Torokhov fixes a regression in the legacy "gumstix" board
code he cleaned up earlier
- The TI K3 maintainers found multiple bugs in the in gpio, audio and
pcie devicetree nodes"
* tag 'arm-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: pxa/gumstix: fix attaching properties to vbus gpio device
doc: platform: cznic: turris-omnia-mcu: Use double backticks for attribute value
doc: platform: cznic: turris-omnia-mcu: Fix sphinx-build warning
platform: cznic: turris-omnia-mcu: Make GPIO code optional
platform: cznic: turris-omnia-mcu: Make poweroff and wakeup code optional
platform: cznic: turris-omnia-mcu: Make TRNG code optional
platform: cznic: turris-omnia-mcu: Make watchdog code optional
arm64: dts: ti: k3-j784s4-main: Correct McASP DMAs
arm64: dts: ti: k3-j722s: Fix gpio-range for main_pmx0
arm64: dts: ti: k3-am62p: Fix gpio-range for main_pmx0
arm64: dts: ti: k3-am62p: Add gpio-ranges for mcu_gpio0
arm64: dts: ti: k3-am62-verdin-dahlia: Keep CTRL_SLEEP_MOCI# regulator on
arm64: dts: ti: k3-j784s4-evm: Consolidate serdes0 references
arm64: dts: ti: k3-j784s4-evm: Assign only lanes 0 and 1 to PCIe1
|
|
Pull block fixes from Jens Axboe:
"Just a set of cleanups for blk-throttle and nvme structures"
* tag 'block-6.11-20240809' of git://git.kernel.dk/linux:
nvme: reorganize nvme_ns_head fields
nvme: change data type of lba_shift
nvme: remove a field from nvme_ns_head
nvme: remove unused parameter
blk-throttle: remove more latency dead-code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
Two fixes on the Qualcomm GENI I2C controller are cleaning up the
error exit patch in the runtime_resume() function. The first is
disabling the clock, the second disables the icc on the way out.
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- correct dual pps handling for MTL_PCH+ [display] (Dnyaneshwar Bhadane)
- Adjust vma offset for framebuffer mmap offset [gem] (Andi Shyti)
- Fix Virtual Memory mapping boundaries calculation [gem] (Andi Shyti)
- Allow evicting to use the requested placement (David Gow)
- Attempt to get pages without eviction first (David Gow)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZrSFpj20b1LbBhCJ@linux
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Fix off-by-one when processing RTP rules (Lucas)
- Use dma_fence_chain_free in chain fence unused as a sync (Brost)
- Fix PL1 disable flow in xe_hwmon_power_max_write (Karthik)
- Take ref to VM in delayed dump snapshot (Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZrUGgVrgTJ_vF2PS@intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.11-2024-08-08:
amdgpu:
- DMCUB fix
- Fix DET programming on some DCNs
- DCC fixes
- DCN 4.0.1 fixes
- SMU 14.0.x update
- MMHUB fix
- DCN 3.1.4 fix
- GC 12.0 fixes
- Fix soft recovery error propogation
- SDMA 7.0 fixes
- DSC fix
drm buddy:
- Add start address to trim function
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240808161134.1227671-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A fix for drm/client to prevent a null pointer dereference, a fix for a
double-free in drm/bridge-connector, a fix for a gem shmem test, and a
fix for async flips updates.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240808-debonair-smoky-mustang-8b6b3f@houat
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth.
Current release - regressions:
- eth: bnxt_en: fix memory out-of-bounds in bnxt_fill_hw_rss_tbl() on
older chips
Current release - new code bugs:
- ethtool: fix off-by-one error / kdoc contradicting the code for max
RSS context IDs
- Bluetooth: hci_qca:
- QCA6390: fix support on non-DT platforms
- QCA6390: don't call pwrseq_power_off() twice
- fix a NULL-pointer derefence at shutdown
- eth: ice: fix incorrect assigns of FEC counters
Previous releases - regressions:
- mptcp: fix handling endpoints with both 'signal' and 'subflow'
flags set
- virtio-net: fix changing ring count when vq IRQ coalescing not
supported
- eth: gve: fix use of netif_carrier_ok() during reconfig / reset
Previous releases - always broken:
- eth: idpf: fix bugs in queue re-allocation on reconfig / reset
- ethtool: fix context creation with no parameters
Misc:
- linkwatch: use system_unbound_wq to ease RTNL contention"
* tag 'net-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (41 commits)
net: dsa: microchip: disable EEE for KSZ8567/KSZ9567/KSZ9896/KSZ9897.
ethtool: Fix context creation with no parameters
net: ethtool: fix off-by-one error in max RSS context IDs
net: pse-pd: tps23881: include missing bitfield.h header
net: fec: Stop PPS on driver remove
net: bcmgenet: Properly overlay PHY and MAC Wake-on-LAN capabilities
l2tp: fix lockdep splat
net: stmmac: dwmac4: fix PCS duplex mode decode
idpf: fix UAFs when destroying the queues
idpf: fix memleak in vport interrupt configuration
idpf: fix memory leaks and crashes while performing a soft reset
bnxt_en : Fix memory out-of-bounds in bnxt_fill_hw_rss_tbl()
net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register()
net/smc: add the max value of fallback reason count
Bluetooth: hci_sync: avoid dup filtering when passive scanning with adv monitor
Bluetooth: l2cap: always unlock channel in l2cap_conless_channel()
Bluetooth: hci_qca: fix a NULL-pointer derefence at shutdown
Bluetooth: hci_qca: fix QCA6390 support on non-DT platforms
Bluetooth: hci_qca: don't call pwrseq_power_off() twice for QCA6390
ice: Fix incorrect assigns of FEC counts
...
|
|
Kernel BO's don't take a ref to the VM, we need the VM for the
delayed snapshot, so take a ref to the VM in delayed snapshot.
v2:
- Check for lrc_bo before taking a VM ref (CI)
- Check lrc_bo->vm before taking / dropping a VM ref (CI)
- Drop VM in xe_lrc_snapshot_free
v5:
- Fix commit message wording (Johnathan)
Fixes: 47058633d9c5 ("drm/xe: Move lrc snapshot capturing to xe_lrc.c")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240801154118.2547543-2-matthew.brost@intel.com
(cherry picked from commit c3bc97d2f102ddd5a8341eeb2dbae2a3e98bb46a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In xe_hwmon_power_max_write, for PL1 disable supported case, instead of
returning after PL1 disable, PL1 enable path was also being run.
Fixed it by returning after disable.
v2: Correct typo and grammar in commit message. (Jonathan)
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Fixes: fef6dd12b45a ("drm/xe/hwmon: Protect hwmon rw attributes with hwmon_lock")
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240801112424.1841766-1-karthik.poosa@intel.com
(cherry picked from commit 146458645e505f5eac498759bcd865cf7c0dfd9a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
A chain fence is uninitialized if not installed in a drm sync obj. Thus
if xe_sync_entry_cleanup is called and sync->chain_fence is non-NULL the
proper cleanup is dma_fence_chain_free rather than a dma-fence put.
Reported-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2411
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2261
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240727012216.2118276-1-matthew.brost@intel.com
(cherry picked from commit 7f7a2da3bf8bc0e0f6c239af495b7050056e889c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Gustavo noticed an odd "+ 2" in rtp_mark_active() while processing
rtp rules and pointed that it should be "+ 1". In fact, while processing
entries without actions (OOB workarounds), if the WA is activated and
has OR rules, it will also inadvertently activate the very next
workaround.
Test in a LNL B0 platform by moving 18024947630 on top of 16020292621,
makes the latter become active:
$ cat /sys/kernel/debug/dri/0/gt0/workarounds
...
OOB Workarounds
18024947630
16020292621
14018094691
16022287689
13011645652
22019338487_display
In future a kunit test will be added to cover the rtp checks for entries
without actions.
Fixes: fe19328b900c ("drm/xe/rtp: Add support for entries with no action")
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726064337.797576-6-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit fd6797ec50c561f085bc94e3ee26f484a52af79e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-08-07 (ice)
This series contains updates to ice driver only.
Grzegorz adds IRQ synchronization call before performing reset and
prevents writing to hardware when it is resetting.
Mateusz swaps incorrect assignment of FEC statistics.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix incorrect assigns of FEC counts
ice: Skip PTP HW writes during PTP reset procedure
ice: Fix reset handler
====================
Link: https://patch.msgid.link/20240807224521.3819189-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As noted in the device errata [1-8], EEE support is not fully operational
in the KSZ8567, KSZ9477, KSZ9567, KSZ9896, and KSZ9897 devices, causing
link drops when connected to another device that supports EEE. The patch
series "net: add EEE support for KSZ9477 switch family" merged in commit
9b0bf4f77162 caused EEE support to be enabled in these devices. A fix for
this regression for the KSZ9477 alone was merged in commit 08c6d8bae48c2.
This patch extends this fix to the other affected devices.
[1] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ8567R-Errata-DS80000752.pdf
[2] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ8567S-Errata-DS80000753.pdf
[3] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9477S-Errata-DS80000754.pdf
[4] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9567R-Errata-DS80000755.pdf
[5] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9567S-Errata-DS80000756.pdf
[6] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9896C-Errata-DS80000757.pdf
[7] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9897R-Errata-DS80000758.pdf
[8] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9897S-Errata-DS80000759.pdf
Fixes: 69d3b36ca045 ("net: dsa: microchip: enable EEE support") # for KSZ8567/KSZ9567/KSZ9896/KSZ9897
Link: https://lore.kernel.org/netdev/137ce1ee-0b68-4c96-a717-c8164b514eec@martin-whitaker.me.uk/
Signed-off-by: Martin Whitaker <foss@martin-whitaker.me.uk>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Link: https://patch.msgid.link/20240807205209.21464-1-foss@martin-whitaker.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Both ethtool_ops.rxfh_max_context_id and the default value used when
it's not specified are supposed to be exclusive maxima (the former
is documented as such; the latter, U32_MAX, cannot be used as an ID
since it equals ETH_RXFH_CONTEXT_ALLOC), but xa_alloc() expects an
inclusive maximum.
Subtract one from 'limit' to produce an inclusive maximum, and pass
that to xa_alloc().
Increase bnxt's max by one to prevent a (very minor) regression, as
BNXT_MAX_ETH_RSS_CTX is an inclusive max. This is safe since bnxt
is not actually hard-limited; BNXT_MAX_ETH_RSS_CTX is just a
leftover from old driver code that managed context IDs itself.
Rename rxfh_max_context_id to rxfh_max_num_contexts to make its
semantics (hopefully) more obvious.
Fixes: 847a8ab18676 ("net: ethtool: let the core choose RSS context IDs")
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/5a2d11a599aa5b0cc6141072c01accfb7758650c.1723045898.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using FIELD_GET() fails in configurations that don't already include
the header file indirectly:
drivers/net/pse-pd/tps23881.c: In function 'tps23881_i2c_probe':
drivers/net/pse-pd/tps23881.c:755:13: error: implicit declaration of function 'FIELD_GET' [-Wimplicit-function-declaration]
755 | if (FIELD_GET(TPS23881_REG_DEVID_MASK, ret) != TPS23881_DEVICE_ID) {
| ^~~~~~~~~
Fixes: 89108cb5c285 ("net: pse-pd: tps23881: Fix the device ID check")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20240807075455.2055224-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PPS was not stopped in `fec_ptp_stop()`, called when
the adapter was removed. Consequentially, you couldn't
safely reload the driver with the PPS signal on.
Fixes: 32cba57ba74b ("net: fec: introduce fec_ptp_stop and use in probe fail path")
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/netdev/CAOMZO5BzcZR8PwKKwBssQq_wAGzVgf1ffwe_nhpQJjviTdxy-w@mail.gmail.com/T/#m01dcb810bfc451a492140f6797ca77443d0cb79f
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240807080956.2556602-1-csokas.bence@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some Wake-on-LAN modes such as WAKE_FILTER may only be supported by the MAC,
while others might be only supported by the PHY. Make sure that the .get_wol()
returns the union of both rather than only that of the PHY if the PHY supports
Wake-on-LAN.
Fixes: 7e400ff35cbe ("net: bcmgenet: Add support for PHY-based Wake-on-LAN")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240806175659.3232204-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dwmac4 was decoding the duplex mode from the GMAC_PHYIF_CONTROL_STATUS
register incorrectly, using GMAC_PHYIF_CTRLSTATUS_LNKMOD_MASK (value 1)
rather than GMAC_PHYIF_CTRLSTATUS_LNKMOD (bit 16). Fix this.
Fixes: 70523e639bf8c ("drivers: net: stmmac: reworking the PCS code.")
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1sbJvd-001rGD-E3@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|