| Age | Commit message (Collapse) | Author |
|---|
|
This adds support for the mailbox via which the kernel can communicate
with the firmware running on the secure processor of the Armada 37xx
SOC.
The rWTM secure processor has access to internal eFuses and
cryptographic circuits, such as the Entropy Bit Generator to generate
true random numbers.
Signed-off-by: Marek Behun <marek.behun@nic.cz>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
On failure of_irq_get() returns a negative value or zero, which is
not handled as an error in the existing implementation.
Instead of using this API, use platform_get_irq() that returns
exclusively a negative value on failure.
Also, do not output an error log in case of defer probe error.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Use the new helper devm_platform_ioremap_resource() which wraps the
platform_get_resource() and devm_ioremap_resource() together, to
simplify the code.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
This reverts commit bbfcac5ff5f26aafa51935a62eb86b6eacfe8a49.
It caused a crash regression on powerpc:
https://lore.kernel.org/linux-crypto/87pnp2aflz.fsf@concordia.ellerman.id.au/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix caam_dump_sg by correctly determining the next scatterlist
entry in the list.
Fixes: 5ecf8ef9103c ("crypto: caam - fix sg dump")
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The detection for DKP (Derived Key Protocol) relied on the value
of the setkey function. This was broken by the recent change which
added des3_aead_setkey.
This patch fixes this by introducing a new flag for DKP and setting
that where needed.
Fixes: 1b52c40919e6 ("crypto: caam - Forbid 2-key 3DES in FIPS mode")
Reported-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The partial block should count as one and appropriately appended
to IV. eg 499B for AES CTR should count 32 block than 31 and
correct count value is updated in iv out.
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
removed un-necessary lock_chcr_dev to protect device state
DETACH. lock is not required to protect I/O count
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Do not request FW to generate cidx update if there is less
space in tx queue to post new request.
SGE DBP 1 pidx increment too large
BUG: unable to handle kernel NULL pointer dereference at
0000000000000124
SGE error for queue 101
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Pull drm updates from Dave Airlie:
"This has two exciting community drivers for ARM Mali accelerators.
Since ARM has never been open source friendly on the GPU side of the
house, the community has had to create open source drivers for the
Mali GPUs. Lima covers the older t4xx and panfrost the newer 6xx/7xx
series. Well done to all involved and hopefully this will help ARM
head in the right direction.
There is also now the ability if you don't have any of the legacy
drivers enabled (pre-KMS) to remove all the pre-KMS support code from
the core drm, this saves 10% or so in codesize on my machine.
i915 also enable Icelake/Elkhart Lake Gen11 GPUs by default, vboxvideo
moves out of staging.
There are also some rcar-du patches which crossover with media tree
but all should be acked by Mauro.
Summary:
uapi changes:
- Colorspace connector property
- fourcc - new YUV formts
- timeline sync objects initially merged
- expose FB_DAMAGE_CLIPS to atomic userspace
new drivers:
- vboxvideo: moved out of staging
- aspeed: ASPEED SoC BMC chip display support
- lima: ARM Mali4xx GPU acceleration driver support
- panfrost: ARM Mali6xx/7xx Midgard/Bitfrost acceleration driver support
core:
- component helper docs
- unplugging fixes
- devm device init
- MIPI/DSI rate control
- shmem backed gem objects
- connector, display_info, edid_quirks cleanups
- dma_buf fence chain support
- 64-bit dma-fence seqno comparison fixes
- move initial fb config code to core
- gem fence array helpers for Lima
- ability to remove legacy support code if no drivers requires it (removes 10% of drm.ko size)
- lease fixes
ttm:
- unified DRM_FILE_PAGE_OFFSET handling
- Account for kernel allocations in kernel zone only
panel:
- OSD070T1718-19TS panel support
- panel-tpo-td028ttec1 backlight support
- Ronbo RB070D30 MIPI/DSI
- Feiyang FY07024DI26A30-D MIPI-DSI panel
- Rocktech jh057n00900 MIPI-DSI panel
i915:
- Comet Lake (Gen9) PCI IDs
- Updated Icelake PCI IDs
- Elkhartlake (Gen11) support
- DP MST property addtions
- plane and watermark fixes
- Icelake port sync and VEBOX disable fixes
- struct_mutex usage reduction
- Icelake gamma fix
- GuC reset fixes
- make mmap more asynchronous
- sound display power well race fixes
- DDI/MIPI-DSI clocks for Icelake
- Icelake RPS frequency changing support
- Icelake workarounds
amdgpu:
- Use HMM for userptr
- vega20 experimental smu11 support
- RAS support for vega20
- BACO support for vega12 + fixes for vega20
- reworked IH interrupt handling
- amdkfd RAS support
- Freesync improvements
- initial timeline sync object support
- DC Z ordering fixes
- NV12 planes support
- colorspace properties for planes=
- eDP opts if eDP already initialized
nouveau:
- misc fixes
etnaviv:
- misc fixes
msm:
- GPU zap shader support expansion
- robustness ABI addition
exynos:
- Logging cleanups
tegra:
- Shared reset fix
- CPU cache maintenance fix
cirrus:
- driver rewritten using simple helpers
meson:
- G12A support
vmwgfx:
- Resource dirtying management improvements
- Userspace logging improvements
virtio:
- PRIME fixes
rockchip:
- rk3066 hdmi support
sun4i:
- DSI burst mode support
vc4:
- load tracker to detect underflow
v3d:
- v3d v4.2 support
malidp:
- initial Mali D71 support in komeda driver
tfp410:
- omap related improvement
omapdrm:
- drm bridge/panel support
- drop some omap specific panels
rcar-du:
- Display writeback support"
* tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm: (1507 commits)
drm/msm/a6xx: No zap shader is not an error
drm/cma-helper: Fix drm_gem_cma_free_object()
drm: Fix timestamp docs for variable refresh properties.
drm/komeda: Mark the local functions as static
drm/komeda: Fixed warning: Function parameter or member not described
drm/komeda: Expose bus_width to Komeda-CORE
drm/komeda: Add sysfs attribute: core_id and config_id
drm: add non-desktop quirk for Valve HMDs
drm/panfrost: Show stored feature registers
drm/panfrost: Don't scream about deferred probe
drm/panfrost: Disable PM on probe failure
drm/panfrost: Set DMA masks earlier
drm/panfrost: Add sanity checks to submit IOCTL
drm/etnaviv: initialize idle mask before querying the HW db
drm: introduce a capability flag for syncobj timeline support
drm: report consistent errors when checking syncobj capibility
drm/nouveau/nouveau: forward error generated while resuming objects tree
drm/nouveau/fb/ramgk104: fix spelling mistake "sucessfully" -> "successfully"
drm/nouveau/i2c: Disable i2c bus access after ->fini()
drm/nouveau: Remove duplicate ACPI_VIDEO_NOTIFY_PROBE definition
...
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
- A handful of fixes from -next that just missed feature freeze
- More panfrost fixes that went directly in -misc-next-fixes (various)
- Fix searchpaths during build (Masahiro)
- msm patch to fix the driver for chips without zap shader (Rob)
- Fix freeing imported buffers in drm_gem_cma_free_object() (Noralf)
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190508205153.GA91135@art_vandelay
|
|
drm-next
This is the 2nd pull request for the malidp-next. The new patches add
additional support for Arm Mali D71 so that it can now be enabled
correctly and brought up on any SoC that contains the IP. From now on
we will start focusing on adding writeback, scaling and other useful
features to bring the driver to the same level of maturity as mali-dp.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507103712.GJ15144@e110455-lin.cambridge.arm.com
|
|
Rename the sparc documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.
There is an except from a document under oradax dir.
It doesn't seem to make much sense to convert this one
to ReST, so let's add it as an included document.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After a recent chat with Dave we agreed to try to finally kill off the
legacy IDE code base. Set a two year grace period in which we try
to move everyone over. There are a few pieces of hardware not
supported by libata yet, but for many of them we aren't even sure
if there are any users. For those that have users we have usually
found a volunteer to add libata support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
NFP does not register devlink ports for representors (without
the "devlink: expose PF and VF representors as ports" series
there are no port flavours to expose them as).
Commit c25f08ac65e4 ("nfp: remove ndo_get_port_parent_id implementation")
went to far in removing ndo_get_port_parent_id for representors.
This causes redirection offloads to fail, and switch_id attribute
missing.
Reintroduce the ndo_get_port_parent_id callback for representor ports.
Fixes: c25f08ac65e4 ("nfp: remove ndo_get_port_parent_id implementation")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It's prone to problems if delay is cleared out for other than RGMII
modes. So lets set/clear the TX-delay in the config register only
if actually RGMII-like interface mode is requested. This only
concerns rtl8211f chips.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are two chip pins named TXDLY and RXDLY which actually adds the 2ns
delays to TXC and RXC for TXD/RXD latching. Alas this is the only
documented info regarding the RGMII timing control configurations the PHY
provides. It turns out the same settings can be setup via MDIO registers
hidden in the extension pages layout. Particularly the extension page 0xa4
provides a register 0x1c, which bits 1 and 2 control the described delays.
They are used to implement the "rgmii-{id,rxid,txid}" phy-mode.
The hidden RGMII configs register utilization was found in the rtl8211e
U-boot driver:
https://elixir.bootlin.com/u-boot/v2019.01/source/drivers/net/phy/realtek.c#L99
There is also a freebsd-folks discussion regarding this register:
https://reviews.freebsd.org/D13591
It confirms that the register bits field must control the so called
configuration pins described in the table 12-13 of the official PHY
datasheet:
8:6 = PHY Address
5:4 = Auto-Negotiation
3 = Interface Mode Select
2 = RX Delay
1 = TX Delay
0 = SELRGV
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This provides a new input driver for supporting the power button on
Basin Cove PMIC, found on Intel Merrifield-based devices.
The driver follows the design used in intel_chtdc_ti_pwrbtn.c module.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Some of latest ASUS laptops support new fn-lock mode switching.
This commit detect whether if the fn-lock option is enabled in
BIOS setting, and toggle the fn-lock mode via a new WMI DEVID
0x00100023 when the corresponding notify code captured.
The ASUS fn-lock mode switch is activated by pressing Fn+Esc.
When on, keys F1 to F12 behave as applicable, with meanings
defined by the application being used at the time. When off,
F1 to F12 directly triggers hardware features, well known audio
volume up/down, brightness up/down...etc, which were triggered
by holding down Fn key and F-keys.
Because there's no way to retrieve the fn-lock mode via existing
WMI methods per ASUS spec, driver need to initialize and keep the
fn-lock mode by itself.
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Reviewed-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
When the ideapad-laptop driver was first written it was written for laptops
which had a hardware rfkill switch. So when the first ideapad laptops
showed up without a hw rfkill switch and it turned out that in this case
the ideapad firmware interface would always report the wifi being hardware-
blocked, a DMI id list of models which lack a hw rfkill switch was started
(by yours truly). Things were done this way to avoid regressing existing
models with a hw rfkill switch. In hindsight this was a mistake.
Lenovo releases a lot of ideapad models every year and even the latest
models still use the "VPC2004" ACPI interface the ideapad-laptop driver
binds to. Having a hw rfkill switch is quite rare on modern hardware, so
all these new models need to be added to the no_hw_rfkill_list, leading
to a never ending game of whack a mole.
Worse the failure mode when not present on the list, is very bad. In this
case the ideapad-laptop driver will report the wifi as being hw-blocked,
at which points NetworkManager does not even try to use it and the user
ends up with non working wifi.
This leads to various Linux fora on the internet being filled with
wifi not working on ideapad laptops stories, which does not make Linux
look good.
The failure mode when we flip the default to assuming that a hw rfkill
switch is not present OTOH is quite benign. When we properly report the
wifi as being hw-blocked on ideapads which do have the hw-switch; and it
is in the wifi-off position, then at least when using NetworkManager +
GNOME3 the user will get a "wifi disabled in hardware" message when trying
to connect to the wifi from the UI. If OTOH we assume there is no hardware
rfkill switch, then the user will get an empty list for the list of
available networks. Although the empty list vs the "wifi disabled in
hardware" message is a regression, it is a very minor regression and it
can easily be fixed on a model by model basis by filling the new
hw_rfkill_list this commit introduces.
Therefor this commit removes the ever growing no_hw_rfkill_list, flipping
the default to assuming there is no hw rfkill switch and adding a new
hw_rfkill_list. Thereby fixing the wifi not working on all the current
ideapad and yoga models which are not on the list yet and also fixing it
for all future ideapad and yoga models using the "VPC2004" ACPI interface.
Note once this patch has been accepted upstream. I plan to write a blog
post asking for users of ideapads and yoga's with a hw rfkill switch to
step forward, so that we can populate the new hw_rfkill_list with the few
older yoga and ideapad models which actually have a hw rfkill switch.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1703338
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add touchscreen platform data for the 'jumper ezpad 6 pro b' touchscreen.
Signed-off-by: Benjamin Renz <appswert@gmail.com>
[hdegoede@redhat.com: Cleanup commit msg, fix some checkpatch warnings]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Make error returns more consistent... no behaviour change intended.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/platform/x86/thinkpad_acpi.c: In function ‘thermal_get_sensor’:
drivers/platform/x86/thinkpad_acpi.c:6316:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (idx >= 8 && idx <= 15) {
^
drivers/platform/x86/thinkpad_acpi.c:6322:2: note: here
case TPACPI_THERMAL_TPEC_8:
^~~~
drivers/platform/x86/thinkpad_acpi.c: In function ‘hotkey_notify’:
drivers/platform/x86/thinkpad_acpi.c:4208:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (tp_features.hotkey_wlsw &&
^
drivers/platform/x86/thinkpad_acpi.c:4216:3: note: here
default:
^~~~~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
Notice that, in this particular case, the code comments are modified
in accordance with what GCC is expecting to find.
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
It seems that the default case should return AE_CTRL_TERMINATE, instead
of falling through to case ACPI_RESOURCE_TYPE_END_TAG and returning AE_OK;
otherwise the line of code at the end of the function is unreachable and
makes no sense:
return AE_CTRL_TERMINATE;
This fix is based on the following thread of discussion:
https://lore.kernel.org/patchwork/patch/959782/
Fixes: 33a04454527e ("sony-laptop: Add SNY6001 device handling (sonypi reimplementation)")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The "out_data" variable is uninitialized at the point. Originally, this
used to print "status" instead and that seems like the correct thing to
print.
Fixes: bc2ef884320b ("alienware-wmi: For WMAX HDMI method, introduce a way to query HDMI cable status")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Dan Carpenter says:
The patch 640f763f98c2: "net: dsa: sja1105: Add support for Spanning
Tree Protocol" from May 5, 2019, leads to the following static
checker warning:
drivers/net/dsa/sja1105/sja1105_main.c:1073 sja1105_stp_state_get()
warn: signedness bug returning '(-22)'
The caller doesn't check for negative errors anyway.
Fixes: 640f763f98c2: ("net: dsa: sja1105: Add support for Spanning Tree Protocol")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use __maybe_unused for power management related functions
instead of #if CONFIG_PM_SLEEP to simply the code.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
This variable is no longer used and the compiler rightly complains that
it should be removed.
../drivers/rtc/rtc-imxdi.c: In function ‘dryice_rtc_set_alarm’:
../drivers/rtc/rtc-imxdi.c:633:16: warning: unused variable ‘now’ [-Wunused-variable]
unsigned long now;
^~~
Rework to remove the unused variable.
Fixes: 629d488a3eb6 ("rtc: imxdi: remove unnecessary check")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
There are no users of set_mms and set_mmss64 as they have all been
converted to set_time and are handling the tm to time conversion on their
own.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Use .set_time instead of the deprecated .set_mmss.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Call the 64bit versions of rtc_tm time conversion now that the range is
enforced by the core.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
While PCAP_RTC_DAY_MASK is set to 0x3ffff, it is very unlikely to be
correct as this ends in june 1992, before the product even existed. It is
more likely to be a 14-bit day counter. The next product in the family (the
mc13xxx) has a 15-bit day counter.
The same issue is seen with PCAP_RTC_TOD_MASK which only has 65535 seconds
and falls short of the necessary 86400 seconds.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Use SPDX-License-Identifier instead of a verbose license text.
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Use .set_time instead of the deprecated .set_mmss.
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
While the range of REFERENCE + TIME is actually 33 bits, the counter
itself (TIME) is a 32-bits seconds counter.
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The IRQ is requested before the struct rtc is allocated and registered, but
this struct is used in the IRQ handler. This may lead to a NULL pointer
dereference.
Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc
struct before requesting the IRQ.
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The while-loop exit condition check is not correct; the
loop should continue if the returns from the function calls are
negative or the CRC status returns are invalid. Currently it
is ignoring the returns from the function calls. Fix this by
removing the status return checks and only break from the loop
at the very end when we know that all the success condtions have
been met.
Kudos to Dan Carpenter for describing the correct fix and
Vladimir Oltean for noting the change to the check on the number
of retries.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Depending on platform firmware, a zap shader may not be required to take
the GPU out of secure mode on boot, in which case we can just write
RBBM_SECVID_TRUST_CNTL directly. Which we *mostly* handled, but missed
clearing 'ret' resulting that hw_init() returned an error on these
devices.
Fixes: abccb9fe3267 ("drm/msm/a6xx: Add zap shader load")
Acked-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190508130726.27557-1-robdclark@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- allow users to invoke 'make' out of the source tree
- refactor scripts/mkmakefile
- deprecate KBUILD_SRC, which was used to track the source tree
location for O= build.
- fix recordmcount.pl in case objdump output is localized
- turn unresolved symbols in external modules to errors from warnings
by default; pass KBUILD_MODPOST_WARN=1 to get them back to warnings
- generate modules.builtin.modinfo to collect .modinfo data from
built-in modules
- misc Makefile cleanups
* tag 'kbuild-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits)
.gitignore: add more all*.config patterns
moduleparam: Save information about built-in modules in separate file
Remove MODULE_ALIAS() calls that take undefined macro
.gitignore: add leading and trailing slashes to generated directories
scripts/tags.sh: fix direct execution of scripts/tags.sh
scripts: override locale from environment when running recordmcount.pl
samples: kobject: allow CONFIG_SAMPLE_KOBJECT to become y
samples: seccomp: turn CONFIG_SAMPLE_SECCOMP into a bool option
kbuild: move Documentation to vmlinux-alldirs
kbuild: move samples/ to KBUILD_VMLINUX_OBJS
modpost: make KBUILD_MODPOST_WARN also configurable for external modules
kbuild: check arch/$(SRCARCH)/include/generated before out-of-tree build
kbuild: remove unneeded dependency for include/config/kernel.release
memory: squash drivers/memory/Makefile.asm-offsets
kbuild: use $(srctree) instead of KBUILD_SRC to check out-of-tree build
kbuild: mkmakefile: generate a simple wrapper of top Makefile
kbuild: mkmakefile: do not check the generated Makefile marker
kbuild: allow Kbuild to start from any directory
kbuild: pass $(MAKECMDGOALS) to sub-make as is
kbuild: fix warning "overriding recipe for target 'Makefile'"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- remove the deprecated Zoran driver from staging
- new I2C driver: ST MIPID02 CSI-2 camera bridge
- new platform driver: Amlogic Meson AO CEC G12A Controller
- add support for USB audio via the media controller
- au0828 driver is now supported via the media controller on both on
media and on usbaudio
- new kernel test for the media device allocator
- add support for stateless decoder at vicodec driver
- lots of other driver improvements fixes and cleanups
* tag 'media/v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (218 commits)
media: dt-bindings: aspeed-video: Add missing memory-region property
media: platform: Aspeed: Make reserved memory optional
media: platform: Aspeed: Remove use of reset line
media: stm32-dcmi: return appropriate error codes during probe
media: vsp1: Add support for missing 16-bit RGB555 formats
media: vsp1: Add support for missing 16-bit RGB444 formats
media: vsp1: Add support for missing 32-bit RGB formats
media: v4l: Add definitions for missing 16-bit RGB555 formats
media: v4l: Add definitions for missing 16-bit RGB4444 formats
media: v4l: Add definitions for missing 32-bit RGB formats
media: zoran: remove deprecated driver
media: MAINTAINERS: Update AO CEC with ao-cec-g12a driver
media: platform: meson: Add Amlogic Meson G12A AO CEC Controller driver
media: dt-bindings: media: meson-ao-cec: Add G12A AO-CEC-B Compatible
media: cros-ec-cec: decrement HDMI device refcount
media: seco-cec: decrement HDMI device refcount
media: tegra_cec: use new cec_notifier_parse_hdmi_phandle helper
media: stih_cec: use new cec_notifier_parse_hdmi_phandle helper
media: s5p_cec: use new cec_notifier_parse_hdmi_phandle helper
media: meson: ao-cec: use new cec_notifier_parse_hdmi_phandle helper
...
|
|
cec_notifier_parse_hdmi_phandle returns an error pointer, not a NULL
pointer on error.
Fixes: 4d34c9267db7: ("media: tegra_cec: use new cec_notifier_parse_hdmi_phandle helper")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
In vpbe_enum_outputs() we check if (temp_index >= cfg->num_outputs) but
the problem is that "temp_index" can be negative. This patch changes
the types to unsigned to address this array underflow bug.
Fixes: 66715cdc3224 ("[media] davinci vpbe: VPBE display driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
When register the capture media device it is assumed that the device
data is the media device. In the imx6 case is but in the imx7 is not
case. The device data is the csi structure.
Add the explicit argument of the media device that we want to
associate with the capture device.
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Acked-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: fix checkpatch alignment warning]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Depending on which video standard is used the driver needs to setup the
hardware to correctly handle fields. If stream is identified as NTSC
or PAL setup field detection and propagate the field detection signal.
Later versions of the datasheet have been updated to make it clear
that FLD register should be set to 0 when dealing with non-interlaced
field formats.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Restart the CSI-2 link if the CSI-2 receiver detects an error during
reception. The driver did nothing when a link error happened and the
data flow simply stopped without the user knowing why.
Change the driver to try and recover from errors by restarting the link
and informing the user that something is not right. For obvious reasons
it's not possible to recover from all errors (video source disconnected
for example) but in such cases the user is at least informed of the
error and the same behavior of the stopped data flow is retained.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The "b->index" is a u32 the comes from the user in the ioctl. It hasn't
been checked. We aren't supposed to use it but we're instead supposed
to use the value that gets written to it when we call videobuf_dqbuf().
The videobuf_dqbuf() first memsets it to zero and then re-initializes it
inside the videobuf_status() function. It's this final value which we
want.
Hans Verkuil pointed out that we need to check the return from
videobuf_dqbuf(). I ended up doing a little cleanup related to that as
well.
Fixes: 72915e851da9 ("[media] V4L2: OMAP: VOUT: dma map and unmap v4l2 buffers in qbuf and dqbuf")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
v4l2-compliance likes to queue a buffer with field set to V4L2_FIELD_ANY
and expects it to be returned corrected to a valid field.
Follow vicodec in handling this in the buf_prepare callback.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The subsystem will free the asd memory on notifier cleanup, if the asd is
added to the notifier.
However the memory is freed using kfree.
Thus, we cannot allocate the asd using devm_*
This can lead to crashes and problems.
To test this issue, just return an error at probe, but cleanup the
notifier beforehand.
Fixes: 106267444f ("[media] atmel-isc: add the Image Sensor Controller code")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
In case the completion function failes, unbind will be called
which will call cancel_work for awb_work.
This will trigger a WARN message from the workqueue.
To avoid this, move the INIT_WORK call at the start of the completion
function. This way the work is always initialized, which corresponds
to the 'always canceled' unbind code.
Fixes: 93d4a26c3d ("[media] atmel-isc: add the isc pipeline function")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
