summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-03-14hwmon: Add support for LTC4151per.dalen@appeartv.com
LTC4151 is High Voltage I2C Current and Voltage Monitor from Linear Technology. Signed-off-by: Per Dalen <per.dalen@appeartv.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14hwmon: (pmbus) Fix LINEAR16 data formatGuenter Roeck
LINEAR16 data format is unsigned, not signed. Impact is that affected attributes report negative values in the upper half of the supported value range. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14hwmon: (pmbus) Continuously update temperature limit registersGuenter Roeck
PMBus only has one set of limit registers for up to three temperature sensors. Thus, changing a limit for one of the temperature sensors affects limits for other temperature sensors in the same page (and potentially multiple pages depending on the chip implementation). To handle this situation, re-read all temperature limit registers when updating sensor data. This way, all affected temperature limits are updated whenever the limit for a single sensor is changed. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14hwmon: (pmbus) Improve support for paged temperature sensorsGuenter Roeck
Assumption so far was that PMBus devices would support TEMP2 and TEMP3 registers only on page 0, and that only the TEMP1 register would be used/supported on other pages. Turns out that is not correct. UCD92xx devices support TEMP1 and TEMP2 on page 0, and TEMP2 on other pages. So it is necessary to change the core code such that it does not make a page based assumptions about temperature register support. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14hwmon: (pmbus) Improve support for paged fansGuenter Roeck
So far, it seemed like fans would either all be in page 0, or that there would be one page per fan. Turns out this was a wrong assumption. There is at least one PMBus fan controller which supports three pages with four fans each. Update code to handle this situation. Reported-by: Greg Schnorr <gschnorr@cisco.com> Tested-by: Greg Schnorr <gschnorr@cisco.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Greg Schnorr <gschnorr@cisco.com>
2011-03-14hwmon: (pmbus) More stringent checking of VOUT_MODE registerGuenter Roeck
Some PMBus chips do not support the VOUT_MODE register. To make matters worse, such chips may not return an error when reading the register either, but instead return 0xff. Check if the register exists using pmbus_check_byte_register() before reading its value. In addition, validate the returned value and ignore it if it is 0xff (which is invalid). Reported-by: Greg Schnorr <gschnorr@cisco.com> Tested-by: Greg Schnorr <gschnorr@cisco.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Greg Schnorr <gschnorr@cisco.com>
2011-03-14hwmon: (pmbus) Add support for Maxim MAX34440/MAX34441Guenter Roeck
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
2011-03-14hwmon: (pmbus) Add support for Maxim MAX16064Guenter Roeck
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
2011-03-14hwmon: (pmbus) Add support for Maxim MAX8688Guenter Roeck
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
2011-03-14hwmon: PMBus device driverGuenter Roeck
This driver adds support for hardware monitoring features of various PMBus devices. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
2011-03-14hwmon: (lm85) Add support for EMC6D103SGuenter Roeck
EMC6D103S is similar to EMC6D103, only it does not support registers 62[5:7], 6D[0:7], and 6E[0:7]. Register respective sysfs attributes and update affected registers for all other chips only. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2011-03-14hwmon: (lm85) Do not update hysteresis and temp_auto_off if auto_temp_min is ↵Guenter Roeck
changed So far, the driver updates temp_auto_hyst and temp_auto_off if temp_auto_min changes. This may cause problems if temp_auto_off was not configured before configuring temp_auto_min, because one of the variables used (off_desired) is not initialized in this case. To simplify the code, and for consistency with other drivers, no longer update the delta between "min" and "off" until the user sets the "off" value again. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2011-03-14hwmon: (lm85) Use function to remove sysfs attribute filesGuenter Roeck
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2011-03-14hwmon: (lm85) Use boolean to determine if VID5 is configuredGuenter Roeck
ADT7463 and ADT7468 optionally support VID5 instead of the standard +12V measurement input. Use a boolean to identify the chip configuration instead of hardcoding it several times. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2011-03-14hwmon: Add support for Lineage Compact Power Line PEM devicesGuenter Roeck
This patch adds support for hardware monitoring of Lineage Compact Power Line Power Entry Modules. Reviewed-by: Tom Grennan <tom.grennan@ericsson.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14hwmon: (lis3lv02d) Convert SPI to dev_pm_opsMark Brown
There is a move to deprecate bus-specific PM operations and move to using dev_pm_ops instead in order to reduce the amount of boilerplate code in buses and facilitiate updates to the PM core. Do this move for the lis3lv02d SPI driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14hwmon: (max6639) Set reasonable default PWM frequencystigge@antcom.de
This patch initializes register CONFIG3 to a reasonable default PWM frequency of 25kHz, to prevent audible sound in fan. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14hwmon: Driver for Maxim MAX6639stigge@antcom.de
2-Channel Temperature Monitor with Dual PWM Fan-Speed Controller Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon: fix problem with changing active VRAM size. (v2)
2011-03-14watchdog: hpwdt: eliminate section mismatch warningAxel Lin
hpwdt_init_nmi_decoding() is called in hpwdt_init_one error handling, thus remove the __devexit annotation of hpwdt_exit_nmi_decoding(). This patch fixes below warning: WARNING: drivers/watchdog/hpwdt.o(.devinit.text+0x36f): Section mismatch in reference from the function hpwdt_init_one() to the function .devexit.text:hpwdt_exit_nmi_decoding() The function __devinit hpwdt_init_one() references a function __devexit hpwdt_exit_nmi_decoding(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of hpwdt_exit_nmi_decoding() so it may be used outside an exit section. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-14watchdog: w83697ug_wdt: Fix set bit 0 to activate GPIO2Wim Van Sebroeck
outb_p(c || 0x01, WDT_EFDR); -> || should be | Reported-By: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-14watchdog: sch311x_wdt: fix printk conditionDan Carpenter
"==" has higher precedence than "&". Since if (sch311x_sio_inb(sio_config_port, 0x30) & (0x01 == 0)) is always false the message is never printed. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-14watchdog: sch311x_wdt: Fix LDN active checkWim Van Sebroeck
if (sch311x_sio_inb(sio_config_port, 0x30) && 0x01 == 0) -> && should be & Reported-By: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-14watchdog: cpwd: Fix buffer-overflowWim Van Sebroeck
cppcheck-1.47 reports: [drivers/watchdog/cpwd.c:650]: (error) Buffer access out-of-bounds: p.devs The source code is for (i = 0; i < 4; i++) { misc_deregister(&p->devs[i].misc); where devs is defined as WD_NUMDEVS big and WD_NUMDEVS is equal to 3. So the 4 should be a 3 or WD_NUMDEVS. Reported-By: David Binderman Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-14drm/radeon: fix problem with changing active VRAM size. (v2)Dave Airlie
So we used to use lpfn directly to restrict VRAM when we couldn't access the unmappable area, however this was removed in 93225b0d7bc030f4a93165347a65893685822d70 as it also restricted the gtt placements. However it was only later noticed that this broke on some hw. This removes the active_vram_size, and just explicitly sets it when it changes, TTM/drm_mm will always use the real_vram_size, and the active vram size will change the TTM size used for lpfn setting. We should re-work the fpfn/lpfn to per-placement at some point I suspect, but that is too late for this kernel. Hopefully this addresses: https://bugs.freedesktop.org/show_bug.cgi?id=35254 v2: fix reported useful VRAM size to userspace to be correct. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-03-13Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon/f71882fg: Set platform drvdata to NULL later hwmon/f71882fg: Fix a typo in a comment
2011-03-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] target: Fix t_transport_aborted handling in LUN_RESET + active I/O shutdown
2011-03-13Merge git://git.infradead.org/users/dwmw2/mtd-2.6.38Linus Torvalds
* git://git.infradead.org/users/dwmw2/mtd-2.6.38: mtd: add "platform:" prefix for platform modalias mtd: mtd_blkdevs: fix double free on error path mtd: amd76xrom: fix oops at boot when resources are not available mtd: fix race in cfi_cmdset_0001 driver mtd: jedec_probe: initialise make sector erase command variable mtd: jedec_probe: Change variable name from cfi_p to cfi
2011-03-13Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon: fix page flipping hangs on r300/r400 drm/radeon: add pageflip hooks for fusion
2011-03-13gpio: add MODULE_DEVICE_TABLEAxel Lin
The device table is required to load modules based on modaliases. After adding MODULE_DEVICE_TABLE, below entries will be added to modules.pcimap: pch_gpio 0x00008086 0x00008803 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0 ml_ioh_gpio 0x000010db 0x0000802e 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0 Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-13hwmon/f71882fg: Set platform drvdata to NULL laterHans de Goede
This avoids a possible race leading to trying to dereference NULL. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-13hwmon/f71882fg: Fix a typo in a commentHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-13drm/radeon: fix page flipping hangs on r300/r400Dave Airlie
We've been getting reports of complete system lockups with rv3xx hw on AGP and PCIE when running gnome-shell or kwin with compositing. It appears the hw really doesn't like setting these registers while stuff is running, this moves the setting of the registers into the modeset since they aren't required to be changed anywhere else. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=35183 Reported-and-tested-by: Álmos <aaalmosss@gmail.com Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-03-11mtd: add "platform:" prefix for platform modaliasAxel Lin
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf (platform: prefix MODALIAS with "platform:"), the platform modalias is prefixed with "platform:". Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@kernel.org
2011-03-11mtd: mtd_blkdevs: fix double free on error pathMaxim Levitsky
This one liner patch fixes double free that will occur if add_mtd_blktrans_dev fails. On failure it frees the input argument, but all its users also free it on error which is natural thing to do. Thus don't free it. All credit for finding that bug belongs to reporters of the bug in the android bugzilla http://code.google.com/p/android/issues/detail?id=13761 Commit message tweaked by Artem. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@kernel.org
2011-03-11mtd: amd76xrom: fix oops at boot when resources are not availableStanislaw Gruszka
For some unknown reasons resources needed by amd76xrom driver can be unavailable. And instead of returning an error, the driver keeps going and crash the kernel. This patch fixes the problem by making the driver return -EBUSY if the resources are not available. Commit messages tweaked by Artem. Reported-by: Russell Whitaker <russ@ashlandhome.net> Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@kernel.org
2011-03-11mtd: fix race in cfi_cmdset_0001 driverJoakim Tjernlund
As inval_cache_and_wait_for_operation() drop and reclaim the lock to invalidate the cache, some other thread may suspend the operation before reaching the for(;;) loop. Therefore the loop must start with checking the chip->state before reading status from the chip. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Acked-by: Michael Cashwell <mboards@prograde.net> Acked-by: Stefan Bigler <stefan.bigler@keymile.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@kernel.org
2011-03-11mtd: jedec_probe: initialise make sector erase command variableAntony Pavlov
In the commit 08968041bef437ec363623cd3218c2b083537ada (mtd: cfi_cmdset_0002: make sector erase command variable) introdused a field sector_erase_cmd. In the same commit initialisation of cfi->sector_erase_cmd made in cfi_chip_setup() (file drivers/mtd/chips/cfi_probe.c), so the CFI chip has no problem: ... cfi->cfi_mode = CFI_MODE_CFI; cfi->sector_erase_cmd = CMD(0x30); ... But for the JEDEC chips this initialisation is not carried out, so the JEDEC chips have sector_erase_cmd == 0. This patch adds the missing initialisation. Signed-off-by: Antony Pavlov <antony@niisi.msk.ru> Acked-by: Guillaume LECERF <glecerf@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> CC: stable@kernel.org
2011-03-11mtd: jedec_probe: Change variable name from cfi_p to cfiAntony Pavlov
In the following commit, we'll need to use the CMD() macro in order to fix the initialisation of the sector_erase_cmd field. That requires the local variable to be called 'cfi', so change it first in a simple patch. Signed-off-by: Antony Pavlov <antony@niisi.msk.ru> Acked-by: Guillaume LECERF <glecerf@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> CC: stable@kernel.org
2011-03-11drm/radeon: add pageflip hooks for fusionDave Airlie
Looks like these got passed over with both being merged at the same time but not quite meeting in the middle. should fix: https://bugs.freedesktop.org/show_bug.cgi?id=34137 along with Michael's phoronix article. Reported-by: Chi-Thanh Christopher Nguyen Article-written-by: Michael Larabel @ phoronix Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-03-10ariadne: remove redundant NULL checkj223yang@asset.uwaterloo.ca
Simply remove redundant 'dev' NULL check. Signed-off-by: Jinqiu Yang <crindy646@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-10Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
2011-03-10Merge branch 'media_fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: [media] mantis_pci: remove asm/pgtable.h include [media] tda829x: fix regression in probe functions [media] mceusb: don't claim multifunction device non-IR parts [media] nuvoton-cir: fix wake from suspend [media] cx18: Add support for Hauppauge HVR-1600 models with s5h1411 [media] ivtv: Fix corrective action taken upon DMA ERR interrupt to avoid hang [media] cx25840: fix probing of cx2583x chips [media] cx23885: Remove unused 'err:' labels to quiet compiler warning [media] cx23885: Revert "Check for slave nack on all transactions" [media] DiB7000M: add pid filtering [media] Fix sysfs rc protocol lookup for rc-5-sz [media] au0828: fix VBI handling when in V4L2 streaming mode [media] ir-raw: Properly initialize the IR event (BZ#27202) [media] s2255drv: firmware re-loading changes [media] Fix double free of video_device in mem2mem_testdev [media] DM04/QQBOX memcpy to const char fix
2011-03-10ipmi: Fix IPMI errors due to timing problemsDoe, YiCheng
This patch fixes an issue in OpenIPMI module where sometimes an ABORT command is sent after sending an IPMI request to BMC causing the IPMI request to fail. Signed-off-by: YiCheng Doe <yicheng.doe@hp.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Acked-by: Tom Mingarelli <thomas.mingarelli@hp.com> Tested-by: Andy Cress <andy.cress@us.kontron.com> Tested-by: Mika Lansirine <Mika.Lansirinne@stonesoft.com> Tested-by: Brian De Wolf <bldewolf@csupomona.edu> Cc: Jean Michel Audet <Jean-Michel.Audet@ca.Kontron.com> Cc: Jozef Sudelsky <jozef.sudolsky@elbiahosting.sk> Acked-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-10drm/i915: Revive combination mode for backlight controlTakashi Iwai
This reverts commit 951f3512dba5bd44cda3e5ee22b4b522e4bb09fb drm/i915: Do not handle backlight combination mode specially since this commit introduced other regressions due to untouched LBPC register, e.g. the backlight dimmed after resume. In addition to the revert, this patch includes a fix for the original issue (weird backlight levels) by removing the wrong bit shift for computing the current backlight level. Also, including typo fixes (lpbc -> lbpc). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=34524 Acked-by: Indan Zupancic <indan@nul.nu> Reviewed-by: Keith Packard <keithp@keithp.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: sbc_fitpc2_wdt, fix crash on systems without DMI_BOARD_NAME
2011-03-09Merge branch 'for-2639-rc7/i2c-fixes' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'for-2639-rc7/i2c-fixes' of git://git.fluff.org/bjdooks/linux: i2c-eg20t: include slab.h for memory allocations i2c-ocores: Fix pointer type mismatch error i2c-omap: Program I2C_WE on OMAP4 to enable i2c wakeup
2011-03-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: fix CONFIG_MMC_UNSAFE_RESUME regression
2011-03-09watchdog: sbc_fitpc2_wdt, fix crash on systems without DMI_BOARD_NAMEJiri Slaby
Some systems don't provide DMI_BOARD_NAME in their DMI tables. Avoid crash in such situations in fitpc2_wdt_init. The fix is to check if the dmi_get_system_info return value is NULL. The oops: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81253ae6>] strstr+0x26/0xa0 PGD 3966e067 PUD 39605067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu1/cache/index2/shared_cpu_map CPU 1 Modules linked in: ... Pid: 1748, comm: modprobe Not tainted 2.6.37-22-default #1 /Bochs RIP: 0010:[<ffffffff81253ae6>] [<ffffffff81253ae6>] strstr+0x26/0xa0 RSP: 0018:ffff88003ad73f18 EFLAGS: 00010206 RAX: 0000000000000000 RBX: 00000000ffffffed RCX: 00000000ffffffff RDX: ffffffffa003f4cc RSI: ffffffffa003f4c2 RDI: 0000000000000000 ... CR2: 0000000000000000 CR3: 000000003b7ac000 CR4: 00000000000006e0 ... Process modprobe (pid: 1748, threadinfo ffff88003ad72000, task ffff88002e6365c0) Stack: ... Call Trace: [<ffffffffa004201f>] fitpc2_wdt_init+0x1f/0x13c [sbc_fitpc2_wdt] [<ffffffff810002da>] do_one_initcall+0x3a/0x170 ... Code: f3 c3 0f 1f 00 80 3e 00 53 48 89 f8 74 1b 48 89 f2 0f 1f 40 00 48 83 c2 01 80 3a 00 75 f7 49 89 d0 48 89 f8 49 29 f0 75 02 5b c3 <80> 3f 00 74 0e 0f 1f 44 00 00 48 83 c0 01 80 38 00 75 f7 49 89 Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-08i2c-eg20t: include slab.h for memory allocationsWolfram Sang
Fixes (with v2.6.38-rc3/parisc/parisc-allmodconfig): src/drivers/i2c/busses/i2c-eg20t.c:720: error: implicit declaration of function 'kzalloc' src/drivers/i2c/busses/i2c-eg20t.c:790: error: implicit declaration of function 'kfree' Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-08-11 05:10:56 +0000