summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-01-04Merge tag 'mips_fixes_5.5_1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: "A collection of MIPS fixes: - Fill the struct cacheinfo shared_cpu_map field with sensible values, notably avoiding issues with perf which was unhappy in the absence of these values. - A boot fix for Loongson 2E & 2F machines which was fallout from some refactoring performed this cycle. - A Kconfig dependency fix for the Loongson CPU HWMon driver. - A couple of VDSO fixes, ensuring gettimeofday() behaves appropriately for kernel configurations that don't include support for a clocksource the VDSO can use & fixing the calling convention for the n32 & n64 VDSOs which would previously clobber the $gp/$28 register. - A build fix for vmlinuz compressed images which were inappropriately building with -fsanitize-coverage despite not being part of the kernel proper, then failing to link due to the missing __sanitizer_cov_trace_pc() function. - A couple of eBPF JIT fixes, including disabling it for MIPS32 due to a large number of issues with the code generated there & reflecting ISA dependencies in Kconfig to enforce that systems which don't support the JIT must include the interpreter" * tag 'mips_fixes_5.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Avoid VDSO ABI breakage due to global register variable MIPS: BPF: eBPF JIT: check for MIPS ISA compliance in Kconfig MIPS: BPF: Disable MIPS32 eBPF JIT MIPS: Prevent link failure with kcov instrumentation MIPS: Kconfig: Use correct form for 'depends on' mips: Fix gettimeofday() in the vdso library MIPS: Fix boot on Fuloong2 systems mips: cacheinfo: report shared CPU map
2020-01-04Merge tag 'dmaengine-fix-5.5-rc5' of ↵Linus Torvalds
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "A bunch of fixes for: - uninitialized dma_slave_caps access - virt-dma use after free in vchan_complete() - driver fixes for ioat, k3dma and jz4780" * tag 'dmaengine-fix-5.5-rc5' of git://git.infradead.org/users/vkoul/slave-dma: ioat: ioat_alloc_ring() failure handling. dmaengine: virt-dma: Fix access after free in vchan_complete() dmaengine: k3dma: Avoid null pointer traversal dmaengine: dma-jz4780: Also break descriptor chains on JZ4725B dmaengine: Fix access to uninitialized dma_slave_caps
2020-01-04Merge tag 'media/v5.5-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - some fixes at CEC core to comply with HDMI 2.0 specs and fix some border cases - a fix at the transmission logic of the pulse8-cec driver - one alignment fix on a data struct at ipu3 when built with 32 bits * tag 'media/v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: intel-ipu3: Align struct ipu3_uapi_awb_fr_config_s to 32 bytes media: pulse8-cec: fix lost cec_transmit_attempt_done() call media: cec: check 'transmit_in_progress', not 'transmitting' media: cec: avoid decrementing transmit_queue_sz if it is 0 media: cec: CEC 2.0-only bcast messages were ignored
2020-01-04rtc: cmos: Revert "rtc: Fix the AltCentury value on AMD/Hygon platform"Alexandre Belloni
There are multiple reports of this patch breaking RTC time setting for AMD platforms. This reverts commit 7ad295d5196a58c22abecef62dd4f99e2f86e831. Cc: Jinke Fan <fanjinke@hygon.cn> Link: https://lore.kernel.org/r/CABXGCsMLob0DC25JS8wwAYydnDoHBSoMh2_YLPfqm3TTvDE-Zw@mail.gmail.com Fixes: 7ad295d5196a ("rtc: Fix the AltCentury value on AMD/Hygon platform") Link: https://lore.kernel.org/r/20200104043110.707810-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-01-03drm/dp_mst: correct the shifting in DP_REMOTE_I2C_READWayne Lin
[Why] According to DP spec, it should shift left 4 digits for NO_STOP_BIT in REMOTE_I2C_READ message. Not 5 digits. In current code, NO_STOP_BIT is always set to zero which means I2C master is always generating a I2C stop at the end of each I2C write transaction while handling REMOTE_I2C_READ sideband message. This issue might have the generated I2C signal not meeting the requirement. Take random read in I2C for instance, I2C master should generate a repeat start to start to read data after writing the read address. This issue will cause the I2C master to generate a stop-start rather than a re-start which is not expected in I2C random read. [How] Correct the shifting value of NO_STOP_BIT for DP_REMOTE_I2C_READ case in drm_dp_encode_sideband_req(). Changes since v1:(https://patchwork.kernel.org/patch/11312667/) * Add more descriptions in commit and cc to stable Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200103055001.10287-1-Wayne.Lin@amd.com
2020-01-03IB/hfi1: Adjust flow PSN with the correct resync_psnKaike Wan
When a TID RDMA ACK to RESYNC request is received, the flow PSNs for pending TID RDMA WRITE segments will be adjusted with the next flow generation number, based on the resync_psn value extracted from the flow PSN of the TID RDMA ACK packet. The resync_psn value indicates the last flow PSN for which a TID RDMA WRITE DATA packet has been received by the responder and the requester should resend TID RDMA WRITE DATA packets, starting from the next flow PSN. However, if resync_psn points to the last flow PSN for a segment and the next segment flow PSN starts with a new generation number, use of the old resync_psn to adjust the flow PSN for the next segment will lead to miscalculation, resulting in WARN_ON and sge rewinding errors: WARNING: CPU: 4 PID: 146961 at /nfs/site/home/phcvs2/gitrepo/ifs-all/components/Drivers/tmp/rpmbuild/BUILD/ifs-kernel-updates-3.10.0_957.el7.x86_64/hfi1/tid_rdma.c:4764 hfi1_rc_rcv_tid_rdma_ack+0x8f6/0xa90 [hfi1] Modules linked in: ib_ipoib(OE) hfi1(OE) rdmavt(OE) rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfsv3 nfs_acl nfs lockd grace fscache iTCO_wdt iTCO_vendor_support skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm irqbypass crc32_pclmul ghash_clmulni_intel ib_isert iscsi_target_mod target_core_mod aesni_intel lrw gf128mul glue_helper ablk_helper cryptd rpcrdma sunrpc opa_vnic ast ttm ib_iser libiscsi drm_kms_helper scsi_transport_iscsi ipmi_ssif syscopyarea sysfillrect sysimgblt fb_sys_fops drm joydev ipmi_si pcspkr sg drm_panel_orientation_quirks ipmi_devintf lpc_ich i2c_i801 ipmi_msghandler wmi rdma_ucm ib_ucm ib_uverbs acpi_cpufreq acpi_power_meter ib_umad rdma_cm ib_cm iw_cm ip_tables ext4 mbcache jbd2 sd_mod crc_t10dif crct10dif_generic crct10dif_pclmul i2c_algo_bit crct10dif_common crc32c_intel e1000e ib_core ahci libahci ptp libata pps_core nfit libnvdimm [last unloaded: rdmavt] CPU: 4 PID: 146961 Comm: kworker/4:0H Kdump: loaded Tainted: G W OE ------------ 3.10.0-957.el7.x86_64 #1 Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.0X.02.0117.040420182310 04/04/2018 Workqueue: hfi0_0 _hfi1_do_tid_send [hfi1] Call Trace: <IRQ> [<ffffffff9e361dc1>] dump_stack+0x19/0x1b [<ffffffff9dc97648>] __warn+0xd8/0x100 [<ffffffff9dc9778d>] warn_slowpath_null+0x1d/0x20 [<ffffffffc05d28c6>] hfi1_rc_rcv_tid_rdma_ack+0x8f6/0xa90 [hfi1] [<ffffffffc05c21cc>] hfi1_kdeth_eager_rcv+0x1dc/0x210 [hfi1] [<ffffffffc05c23ef>] ? hfi1_kdeth_expected_rcv+0x1ef/0x210 [hfi1] [<ffffffffc0574f15>] kdeth_process_eager+0x35/0x90 [hfi1] [<ffffffffc0575b5a>] handle_receive_interrupt_nodma_rtail+0x17a/0x2b0 [hfi1] [<ffffffffc056a623>] receive_context_interrupt+0x23/0x40 [hfi1] [<ffffffff9dd4a294>] __handle_irq_event_percpu+0x44/0x1c0 [<ffffffff9dd4a442>] handle_irq_event_percpu+0x32/0x80 [<ffffffff9dd4a4cc>] handle_irq_event+0x3c/0x60 [<ffffffff9dd4d27f>] handle_edge_irq+0x7f/0x150 [<ffffffff9dc2e554>] handle_irq+0xe4/0x1a0 [<ffffffff9e3795dd>] do_IRQ+0x4d/0xf0 [<ffffffff9e36b362>] common_interrupt+0x162/0x162 <EOI> [<ffffffff9dfa0f79>] ? swiotlb_map_page+0x49/0x150 [<ffffffffc05c2ed1>] hfi1_verbs_send_dma+0x291/0xb70 [hfi1] [<ffffffffc05c2c40>] ? hfi1_wait_kmem+0xf0/0xf0 [hfi1] [<ffffffffc05c3f26>] hfi1_verbs_send+0x126/0x2b0 [hfi1] [<ffffffffc05ce683>] _hfi1_do_tid_send+0x1d3/0x320 [hfi1] [<ffffffff9dcb9d4f>] process_one_work+0x17f/0x440 [<ffffffff9dcbade6>] worker_thread+0x126/0x3c0 [<ffffffff9dcbacc0>] ? manage_workers.isra.25+0x2a0/0x2a0 [<ffffffff9dcc1c31>] kthread+0xd1/0xe0 [<ffffffff9dcc1b60>] ? insert_kthread_work+0x40/0x40 [<ffffffff9e374c1d>] ret_from_fork_nospec_begin+0x7/0x21 [<ffffffff9dcc1b60>] ? insert_kthread_work+0x40/0x40 This patch fixes the issue by adjusting the resync_psn first if the flow generation has been advanced for a pending segment. Fixes: 9e93e967f7b4 ("IB/hfi1: Add a function to receive TID RDMA ACK packet") Link: https://lore.kernel.org/r/20191219231920.51069.37147.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-01-03IB/hfi1: Don't cancel unused work itemKaike Wan
In the iowait structure, two iowait_work entries were included to queue a given object: one for normal IB operations, and the other for TID RDMA operations. For non-TID RDMA operations, the iowait_work structure for TID RDMA is initialized to contain a NULL function (not used). When the QP is reset, the function iowait_cancel_work will be called to cancel any pending work. The problem is that this function will call cancel_work_sync() for both iowait_work entries, even though the one for TID RDMA is not used at all. Eventually, the call cascades to __flush_work(), wherein a WARN_ON will be triggered due to the fact that work->func is NULL. The WARN_ON was introduced in commit 4d43d395fed1 ("workqueue: Try to catch flush_work() without INIT_WORK().") This patch fixes the issue by making sure that a work function is present for TID RDMA before calling cancel_work_sync in iowait_cancel_work. Fixes: 4d43d395fed1 ("workqueue: Try to catch flush_work() without INIT_WORK().") Fixes: 5da0fc9dbf89 ("IB/hfi1: Prepare resource waits for dual leg") Link: https://lore.kernel.org/r/20191219211941.58387.39883.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-01-03net: Google gve: Remove dma_wmb() before ringing doorbellLiran Alon
Current code use dma_wmb() to ensure Rx/Tx descriptors are visible to device before writing to doorbell. However, these dma_wmb() are wrong and unnecessary. Therefore, they should be removed. iowrite32be() called from gve_rx_write_doorbell()/gve_tx_put_doorbell() should guaratee that all previous writes to WB/UC memory is visible to device before the write done by iowrite32be(). E.g. On ARM64, iowrite32be() calls __iowmb() which expands to dma_wmb() and only then calls __raw_writel(). Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-03net: phylink: fix failure to register on x86 systemsRussell King
The kernel test robot reports a boot failure with qemu in 5.5-rc, referencing commit 2203cbf2c8b5 ("net: sfp: move fwnode parsing into sfp-bus layer"). This is caused by phylink_create() being passed a NULL fwnode, causing fwnode_property_get_reference_args() to return -EINVAL. Don't attempt to attach to a SFP bus if we have no fwnode, which avoids this issue. Reported-by: kernel test robot <rong.a.chen@intel.com> Fixes: 2203cbf2c8b5 ("net: sfp: move fwnode parsing into sfp-bus layer") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-03Merge tag 'block-5.5-20200103' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Three fixes in here: - Fix for a missing split on default memory boundary mask (4G) (Ming) - Fix for multi-page read bio truncate (Ming) - Fix for null_blk zone close request handling (Damien)" * tag 'block-5.5-20200103' of git://git.kernel.dk/linux-block: null_blk: Fix REQ_OP_ZONE_CLOSE handling block: fix splitting segments on boundary masks block: add bio_truncate to fix guard_bio_eod
2020-01-03RDMA/bnxt_re: Fix Send Work Entry state check while polling completionsSelvin Xavier
Some adapters need a fence Work Entry to handle retransmission. Currently the driver checks for this condition, only if the Send queue entry is signalled. Implement the condition check, irrespective of the signalled state of the Work queue entries Failure to add the fence can result in access to memory that is already marked as completed, triggering data corruption, transmission failure, IOMMU failures, etc. Fixes: 9152e0b722b2 ("RDMA/bnxt_re: HW workarounds for handling specific conditions") Link: https://lore.kernel.org/r/1574671174-5064-3-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-01-03RDMA/bnxt_re: Avoid freeing MR resources if dereg failsSelvin Xavier
The driver returns an error code for MR dereg, but frees the MR structure. When the MR dereg is retried due to previous error, the system crashes as the structure is already freed. BUG: unable to handle kernel NULL pointer dereference at 00000000000001b8 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 7 PID: 12178 Comm: ib_send_bw Kdump: loaded Not tainted 4.18.0-124.el8.x86_64 #1 Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 1.1.10 03/10/2015 RIP: 0010:__dev_printk+0x2a/0x70 Code: 0f 1f 44 00 00 49 89 d1 48 85 f6 0f 84 f6 2b 00 00 4c 8b 46 70 4d 85 c0 75 04 4c 8b 46 10 48 8b 86 a8 00 00 00 48 85 c0 74 16 <48> 8b 08 0f be 7f 01 48 c7 c2 13 ac ac 83 83 ef 30 e9 10 fe ff ff RSP: 0018:ffffaf7c04607a60 EFLAGS: 00010006 RAX: 00000000000001b8 RBX: ffffa0010c91c488 RCX: 0000000000000246 RDX: ffffaf7c04607a68 RSI: ffffa0010c91caa8 RDI: ffffffff83a788eb RBP: ffffaf7c04607ac8 R08: 0000000000000000 R09: ffffaf7c04607a68 R10: 0000000000000000 R11: 0000000000000001 R12: ffffaf7c04607b90 R13: 000000000000000e R14: 0000000000000000 R15: 00000000ffffa001 FS: 0000146fa1f1cdc0(0000) GS:ffffa0012fac0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000001b8 CR3: 000000007680a003 CR4: 00000000001606e0 Call Trace: dev_err+0x6c/0x90 ? dev_printk_emit+0x4e/0x70 bnxt_qplib_rcfw_send_message+0x594/0x660 [bnxt_re] ? dev_err+0x6c/0x90 bnxt_qplib_free_mrw+0x80/0xe0 [bnxt_re] bnxt_re_dereg_mr+0x2e/0xd0 [bnxt_re] ib_dereg_mr+0x2f/0x50 [ib_core] destroy_hw_idr_uobject+0x20/0x70 [ib_uverbs] uverbs_destroy_uobject+0x2e/0x170 [ib_uverbs] __uverbs_cleanup_ufile+0x6e/0x90 [ib_uverbs] uverbs_destroy_ufile_hw+0x61/0x130 [ib_uverbs] ib_uverbs_close+0x1f/0x80 [ib_uverbs] __fput+0xb7/0x230 task_work_run+0x8a/0xb0 do_exit+0x2da/0xb40 ... RIP: 0033:0x146fa113a387 Code: Bad RIP value. RSP: 002b:00007fff945d1478 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff02 RAX: 0000000000000000 RBX: 000055a248908d70 RCX: 0000000000000000 RDX: 0000146fa1f2b000 RSI: 0000000000000001 RDI: 000055a248906488 RBP: 000055a248909630 R08: 0000000000010000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 000055a248906488 R13: 0000000000000001 R14: 0000000000000000 R15: 000055a2489095f0 Do not free the MR structures, when driver returns error to the stack. Fixes: 872f3578241d ("RDMA/bnxt_re: Add support for MRs with Huge pages") Link: https://lore.kernel.org/r/1574671174-5064-2-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-01-03Merge tag 'drm-fixes-2020-01-03' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "New Years fixes! Mostly amdgpu with a light smattering of arm graphics, and two AGP warning fixes. Quiet as expected, hopefully we don't get a post holiday rush. agp: - two unused variable removed amdgpu: - ATPX regression fix - SMU metrics table locking fixes - gfxoff fix for raven - RLC firmware loading stability fix mediatek: - external display fix - dsi timing fix sun4i: - Fix double-free in connector/encoder cleanup (Stefan) maildp: - Make vtable static (Ben)" * tag 'drm-fixes-2020-01-03' of git://anongit.freedesktop.org/drm/drm: agp: remove unused variable arqsz in agp_3_5_enable() agp: remove unused variable mcapndx drm/amdgpu: correct RLC firmwares loading sequence drm/amdgpu: enable gfxoff for raven1 refresh drm/amdgpu/smu: add metrics table lock for vega20 (v2) drm/amdgpu/smu: add metrics table lock for navi (v2) drm/amdgpu/smu: add metrics table lock for arcturus (v2) drm/amdgpu/smu: add metrics table lock Revert "drm/amdgpu: simplify ATPX detection" drm/arm/mali: make malidp_mw_connector_helper_funcs static drm/sun4i: hdmi: Remove duplicate cleanup calls drm/mediatek: reduce the hbp and hfp for phy timing drm/mediatek: Fix can't get component for external display plane. drm/mediatek: Check return value of mtk_drm_ddp_comp_for_plane.
2020-01-03gpio: mockup: fix coding styleBartosz Golaszewski
I have missed two indentation issues in commit 64e7112ee307 ("gpio: mockup: add set_config to support pull up/down"). This commit fixes them. Fixes: 64e7112ee307 ("gpio: mockup: add set_config to support pull up/down") Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-01-03media: intel-ipu3: Align struct ipu3_uapi_awb_fr_config_s to 32 bytesSakari Ailus
A struct that needs to be aligned to 32 bytes has a size of 28. Increase the size to 32. This makes elements of arrays of this struct aligned to 32 as well, and other structs where members are aligned to 32 mixing ipu3_uapi_awb_fr_config_s as well as other types. Fixes: commit dca5ef2aa1e6 ("media: staging/intel-ipu3: remove the unnecessary compiler flags") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-01-03staging: wfx: check for memory allocation failures from wfx_alloc_hifColin Ian King
Currently calls to wfx_alloc_hif are not checking for a null return when a memory allocation fails and this leads to null pointer dereferencing issues. Fix this by adding null pointer checks and returning passing down -ENOMEM errors where necessary. The error checking in the current driver is a bit sparse, so this may need some extra attention later if required. Fixes: f95a29d40782 ("staging: wfx: add HIF commands helpers") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20191221001543.15255-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-03staging: rtl8188eu: Add device code for TP-Link TL-WN727N v5.21Michael Straube
This device was added to the stand-alone driver on github. Add it to the staging driver as well. Link: https://github.com/lwfinger/rtl8188eu/commit/b9b537aa25a8 Signed-off-by: Michael Straube <straube.linux@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191228143725.24455-1-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-03staging: comedi: adv_pci1710: fix AI channels 16-31 for PCI-1713Ian Abbott
The Advantech PCI-1713 has 32 analog input channels, but an incorrect bit-mask in the definition of the `PCI171X_MUX_CHANH(x)` and PCI171X_MUX_CHANL(x)` macros is causing channels 16 to 31 to be aliases of channels 0 to 15. Change the bit-mask value from 0xf to 0xff to fix it. Note that the channel numbers will have been range checked already, so the bit-mask isn't really needed. Fixes: 92c65e5553ed ("staging: comedi: adv_pci1710: define the mux control register bits") Reported-by: Dmytro Fil <monkdaf@gmail.com> Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20191227170054.32051-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-03staging: vt6656: set usb_set_intfdata on driver fail.Malcolm Priestley
intfdata will contain stale pointer when the device is detached after failed initialization when referenced in vt6656_disconnect Provide driver access to it here and NULL it. Cc: stable <stable@vger.kernel.org> Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/6de448d7-d833-ef2e-dd7b-3ef9992fee0e@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-03staging: vt6656: remove bool from vnt_radio_power_on retMalcolm Priestley
The driver uses logical only error checking a bool true would flag error. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/cc52b67c-9ef8-3e57-815a-44d10701919e@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-03staging: vt6656: limit reg output to block sizeMalcolm Priestley
vnt_control_out appears to fail when BBREG is greater than 64 writes. Create new function that will relay an array in no larger than the indicated block size. It appears that this command has always failed but was ignored by driver until the introduction of error checking. Cc: stable <stable@vger.kernel.org> # v5.3+ Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/a41f0601-df46-ce6e-ab7c-35e697946e2a@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-03staging: vt6656: correct return of vnt_init_registers.Malcolm Priestley
The driver standard error returns remove bool false conditions. Cc: stable <stable@vger.kernel.org> # v5.3+ Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/072ec0b3-425f-277e-130c-1e3a116c90d6@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-03staging: vt6656: Fix non zero logical return of, usb_control_msgMalcolm Priestley
Starting with commit 59608cb1de1856 ("staging: vt6656: clean function's error path in usbpipe.c") the usb control functions have returned errors throughout driver with only logical variable checking. However, usb_control_msg return the amount of bytes transferred this means that normal operation causes errors. Correct the return function so only return zero when transfer is successful. Cc: stable <stable@vger.kernel.org> # v5.3+ Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/08e88842-6f78-a2e3-a7a0-139fec960b2b@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-03optee: Fix multi page dynamic shm pool allocSumit Garg
optee_shm_register() expected pages to be passed as an array of page pointers rather than as an array of contiguous pages. So fix that via correctly passing pages as per expectation. Fixes: a249dd200d03 ("tee: optee: Fix dynamic shm pool allocations") Reported-by: Vincent Cao <vincent.t.cao@intel.com> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Tested-by: Vincent Cao <vincent.t.cao@intel.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-01-03staging: exfat: add STAGING prefix to config namesNamjae Jeon
Add STAGING prefix to config names to avoid collsion with fs/exfat config. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Link: https://lore.kernel.org/r/20200103011345.25245-1-namjae.jeon@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-03staging: vt6656: remove unnecessary parenthesisAmir Mahdi Ghorbanian
Remove unnecessary parenthesis to abide by kernel coding-style. Signed-off-by: Amir Mahdi Ghorbanian <indigoomega021@gmail.com> Link: https://lore.kernel.org/r/20191230155520.GA27072@user-ThinkPad-X230 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-03staging: rtl8188eu: use break to exit while loopMichael Straube
The variable bContinual in Efuse_PgPacketRead() is only used to break out of a while loop. Remove the variable and use break instead. Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20191220174413.13913-1-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-03staging: kpc2000: remove unnecessary assertions in kpc_dma_transferAditya Pakki
In kpc_dma_transfer(), the assertion that priv is NULL and priv->ldev is NULL, are never satisfied. The two callers of the function, dereference the fields before the function is called. This patch removes the two BUG_ON calls. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Link: https://lore.kernel.org/r/20191219172118.17456-1-pakki001@umn.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-03agp: remove unused variable arqsz in agp_3_5_enable()Yunfeng Ye
This patch fix the following warning: drivers/char/agp/isoch.c: In function ‘agp_3_5_enable’: drivers/char/agp/isoch.c:322:13: warning: variable ‘arqsz’ set but not used [-Wunused-but-set-variable] u32 isoch, arqsz; ^~~~~ Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-01-03agp: remove unused variable mcapndxYunfeng Ye
This patch fix the following warning: drivers/char/agp/isoch.c: In function ‘agp_3_5_isochronous_node_enable’: drivers/char/agp/isoch.c:87:5: warning: variable ‘mcapndx’ set but not used [-Wunused-but-set-variable] u8 mcapndx; ^~~~~~~ Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-01-03spi: spi-dw: Add lock protect dw_spi rx/tx to prevent concurrent callswuxu.wu
dw_spi_irq() and dw_spi_transfer_one concurrent calls. I find a panic in dw_writer(): txw = *(u8 *)(dws->tx), when dw->tx==null, dw->len==4, and dw->tx_end==1. When tpm driver's message overtime dw_spi_irq() and dw_spi_transfer_one may concurrent visit dw_spi, so I think dw_spi structure lack of protection. Otherwise dw_spi_transfer_one set dw rx/tx buffer and then open irq, store dw rx/tx instructions and other cores handle irq load dw rx/tx instructions may out of order. [ 1025.321302] Call trace: ... [ 1025.321319] __crash_kexec+0x98/0x148 [ 1025.321323] panic+0x17c/0x314 [ 1025.321329] die+0x29c/0x2e8 [ 1025.321334] die_kernel_fault+0x68/0x78 [ 1025.321337] __do_kernel_fault+0x90/0xb0 [ 1025.321346] do_page_fault+0x88/0x500 [ 1025.321347] do_translation_fault+0xa8/0xb8 [ 1025.321349] do_mem_abort+0x68/0x118 [ 1025.321351] el1_da+0x20/0x8c [ 1025.321362] dw_writer+0xc8/0xd0 [ 1025.321364] interrupt_transfer+0x60/0x110 [ 1025.321365] dw_spi_irq+0x48/0x70 ... Signed-off-by: wuxu.wu <wuxu.wu@huawei.com> Link: https://lore.kernel.org/r/1577849981-31489-1-git-send-email-wuxu.wu@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-03regulator: bd70528: Remove .set_ramp_delay for bd70528_ldo_opsAxel Lin
The .set_ramp_delay should be for bd70528_buck_ops only. Setting .set_ramp_delay for for bd70528_ldo_ops causes problem because BD70528_MASK_BUCK_RAMP (0x10) overlaps with BD70528_MASK_LDO_VOLT (0x1f). So setting ramp_delay for LDOs may change the voltage output, fix it. Fixes: 99ea37bd1e7d ("regulator: bd70528: Support ROHM BD70528 regulator block") Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/20200101022406.15176-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-02Merge tag 'linux-can-fixes-for-5.5-20200102' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2020-01-02 this is a pull request of 9 patches for net/master. The first 5 patches target all the tcan4x5x driver. The first 3 patches of them are by Dan Murphy and Sean Nyekjaer and improve the device initialization (power on, reset and get device out of standby before register access). The next patch is by Dan Murphy and disables the INH pin device-state if the GPIO is unavailable. The last patch for the tcan4x5x driver is by Gustavo A. R. Silva and fixes an inconsistent PTR_ERR check in the tcan4x5x_parse_config() function. The next patch is by Oliver Hartkopp and targets the generic CAN device infrastructure. It ensures that an initialized headroom in outgoing CAN sk_buffs (e.g. if injected by AF_PACKET). The last 2 patches are by Johan Hovold and fix the kvaser_usb and gs_usb drivers by always using the current alternate setting not blindly the first one. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02net: freescale: fec: Fix ethtool -d runtime PMAndrew Lunn
In order to dump the FECs registers the clocks have to be ticking, otherwise a data abort occurs. Add calls to runtime PM so they are enabled and later disabled. Fixes: e8fcfcd5684a ("net: fec: optimize the clock management to save power") Reported-by: Chris Healy <Chris.Healy@zii.aero> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02vxlan: fix tos value before xmitHangbin Liu
Before ip_tunnel_ecn_encap() and udp_tunnel_xmit_skb() we should filter tos value by RT_TOS() instead of using config tos directly. vxlan_get_route() would filter the tos to fl4.flowi4_tos but we didn't return it back, as geneve_get_v4_rt() did. So we have to use RT_TOS() directly in function ip_tunnel_ecn_encap(). Fixes: 206aaafcd279 ("VXLAN: Use IP Tunnels tunnel ENC encap API") Fixes: 1400615d64cf ("vxlan: allow setting ipv6 traffic class") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02net: dsa: mv88e6xxx: force cmode write on 6141/6341Baruch Siach
mv88e6xxx_port_set_cmode() relies on cmode stored in struct mv88e6xxx_port to skip cmode update when the requested value matches the cached value. It turns out that mv88e6xxx_port_hidden_write() might change the port cmode setting as a side effect, so we can't rely on the cached value to determine that cmode update in not necessary. Force cmode update in mv88e6341_port_set_cmode(), to make serdes configuration work again. Other mv88e6xxx_port_set_cmode() callers keep the current behaviour. This fixes serdes configuration of the 6141 switch on SolidRun Clearfog GT-8K. Fixes: 7a3007d22e8 ("net: dsa: mv88e6xxx: fully support SERDES on Topaz family") Reported-by: Denis Odintsov <d.odintsov@traviangames.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02USB-PD tcpm: bad warning+size, PPS adaptersDouglas Gilbert
Augmented Power Delivery Objects (A)PDO_s are used by USB-C PD power adapters to advertize the voltages and currents they support. There can be up to 7 PDO_s but before PPS (programmable power supply) there were seldom more than 4 or 5. Recently Samsung released an optional PPS 45 Watt power adapter (EP-TA485) that has 7 PDO_s. It is for the Galaxy 10+ tablet and charges it quicker than the adapter supplied at purchase. The EP-TA485 causes an overzealous WARN_ON to soil the log plus it miscalculates the number of bytes to read. So this bug has been there for some time but goes undetected for the majority of USB-C PD power adapters on the market today that have 6 or less PDO_s. That may soon change as more USB-C PD adapters with PPS come to market. Tested on a EP-TA485 and an older Lenovo PN: SA10M13950 USB-C 65 Watt adapter (without PPS and has 4 PDO_s) plus several other PD power adapters. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191230033544.1809-1-dgilbert@interlog.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-02can: mscan: mscan_rx_poll(): fix rx path lockup when returning from polling ↵Florian Faber
to irq mode Under load, the RX side of the mscan driver can get stuck while TX still works. Restarting the interface locks up the system. This behaviour could be reproduced reliably on a MPC5121e based system. The patch fixes the return value of the NAPI polling function (should be the number of processed packets, not constant 1) and the condition under which IRQs are enabled again after polling is finished. With this patch, no more lockups were observed over a test period of ten days. Fixes: afa17a500a36 ("net/can: add driver for mscan family & mpc52xx_mscan") Signed-off-by: Florian Faber <faber@faberman.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02can: gs_usb: gs_usb_probe(): use descriptors of current altsettingJohan Hovold
Make sure to always use the descriptors of the current alternate setting to avoid future issues when accessing fields that may differ between settings. Signed-off-by: Johan Hovold <johan@kernel.org> Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02can: kvaser_usb: fix interface sanity checkJohan Hovold
Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Cc: stable <stable@vger.kernel.org> # 4.19 Cc: Jimmy Assarsson <extja@kvaser.com> Cc: Christer Beskow <chbe@kvaser.com> Cc: Nicklas Johansson <extnj@kvaser.com> Cc: Martin Henriksson <mh@kvaser.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02can: tcan4x5x: tcan4x5x_parse_config(): fix inconsistent IS_ERR and PTR_ERRGustavo A. R. Silva
Fix inconsistent IS_ERR and PTR_ERR in tcan4x5x_parse_config(). The proper pointer to be passed as argument is tcan4x5x->device_wake_gpio. This bug was detected with the help of Coccinelle. Fixes: 2de497356955 ("can: tcan45x: Make wake-up GPIO an optional GPIO") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02can: tcan4x5x: tcan4x5x_parse_config(): Disable the INH pin device-state ↵Dan Murphy
GPIO is unavailable If the device state GPIO is not connected to the host then disable the INH output from the TCAN device per section 8.3.5 of the data sheet. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02can: tcan4x5x: tcan4x5x_parse_config(): reset device before register accessSean Nyekjaer
It's a good idea to reset a ip-block/spi device before using it, this patch will reset the device. And a generic reset function if needed elsewhere. Signed-off-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02can: tcan4x5x: tcan4x5x_can_probe(): turn on the power before parsing the configDan Murphy
The tcan4x5x_parse_config() function now performs action on the device either reading or writing and a reset. If the devive has a switchable power supppy (i.e. regulator is managed) it needs to be turned on. So turn on the regulator if available. If the parsing fails, turn off the regulator. Fixes: 2de497356955 ("can: tcan45x: Make wake-up GPIO an optional GPIO") Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02can: tcan4x5x: tcan4x5x_can_probe(): get the device out of standby before ↵Sean Nyekjaer
register access The m_can tries to detect if Non ISO Operation is available while in standby mode, this function results in the following error: | tcan4x5x spi2.0 (unnamed net_device) (uninitialized): Failed to init module | tcan4x5x spi2.0: m_can device registered (irq=84, version=32) | tcan4x5x spi2.0 can2: TCAN4X5X successfully initialized. When the tcan device comes out of reset it goes in standby mode. The m_can driver tries to access the control register but fails due to the device being in standby mode. So this patch will put the tcan device in normal mode before the m_can driver does the initialization. Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel") Cc: stable@vger.kernel.org Signed-off-by: Sean Nyekjaer <sean@geanix.com> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02Merge tag 'usb-serial-5.5-rc5' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.5-rc5 Here's a couple of new modem device ids, including a new quirk for devices that expect zero-length packets. Due to the holidays, only the first one has been in linux-next and with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> * tag 'usb-serial-5.5-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add ZLP support for 0x1bc7/0x9010 USB: serial: option: add Telit ME910G1 0x110a composition
2020-01-02Merge tag 'phy-for-5.5-rc' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus Kishon writes: phy: for 5.5-rc *) Fix error path in cpcap-usb driver when no host driver is loaded to avoid debug serial console from stop working *) Fix to let USB host idle before switching to UART mode in cpcap-usb driver in order to avoid flakey enumeration next time *) Prevent USB line glitches from waking up modem by enabling the USB lines (GPIO mux) after configuring the cpcap-usb PHY *) Improve host vs docked mode detection in cpcap-usb PHY driver to keep VBUS enabled in host mode *) Fix to prevent cpcap-usb PHY driver from enabling the PHY twice *) Increase PHY ready timeout in qcom-qmp PHY as it takes more than 1ms to initialize *) Round clock rate down to closest 1000 Hz in phy-rockchip-inno-hdmi to prevent wrong pixel clock to be used and result in no-signal when configuring a mode on RK3328 * tag 'phy-for-5.5-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: phy/rockchip: inno-hdmi: round clock rate down to closest 1000 Hz phy: cpcap-usb: Drop extra write to usb2 register phy: cpcap-usb: Improve host vs docked mode detection phy: cpcap-usb: Prevent USB line glitches from waking up modem phy: mapphone-mdm6600: Fix uninitialized status value regression phy: cpcap-usb: Fix flakey host idling and enumerating of devices phy: qcom-qmp: Increase PHY ready timeout phy: cpcap-usb: Fix error path when no host driver is loaded
2020-01-02clk: sunxi-ng: h6-r: Fix AR100/R_APB2 parent orderSamuel Holland
According to the BSP source code, both the AR100 and R_APB2 clocks have PLL_PERIPH0 as mux index 3, not 2 as it was on previous chips. The pre- divider used for PLL_PERIPH0 should be changed to index 3 to match. This was verified by running a rough benchmark on the AR100 with various clock settings: | mux | pre-divider | iterations/second | clock source | |=====|=============|===================|==============| | 0 | 0 | 19033 (stable) | osc24M | | 2 | 5 | 11466 (unstable) | iosc/osc16M | | 2 | 17 | 11422 (unstable) | iosc/osc16M | | 3 | 5 | 85338 (stable) | pll-periph0 | | 3 | 17 | 27167 (stable) | pll-periph0 | The relative performance numbers all match up (with pll-periph0 running at its default 600MHz). Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-01-02clk: sunxi-ng: h6-r: Simplify R_APB1 clock definitionSamuel Holland
Like the APB0 clock on previous chips, this is a simple single-parent clock with an M divider. Use the equivalent helper macro instead of writing out the whole clock description manually. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-01-02clk: sunxi-ng: sun8i-r: Fix divider on APB0 clockSamuel Holland
According to the BSP source code, the APB0 clock on the H3 and H5 has a normal M divider, not a power-of-two divider. This matches the hardware in the A83T (as described in both the BSP source code and the manual). Since the A83T and H3/A64 clocks are actually the same, we can merge the definitions. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-08-01 08:08:58 +0000