| Age | Commit message (Collapse) | Author |
|---|
|
This commit fixes the bug in the handling of partial mapping of the
buffer objects to the GPU, which caused kernel warnings.
Panthor didn't correctly handle the case where the partial mapping
spanned multiple scatterlists and the mapping offset didn't point
to the 1st page of starting scatterlist. The offset variable was
not cleared after reaching the starting scatterlist.
Following warning messages were seen.
WARNING: CPU: 1 PID: 650 at drivers/iommu/io-pgtable-arm.c:659 __arm_lpae_unmap+0x254/0x5a0
<snip>
pc : __arm_lpae_unmap+0x254/0x5a0
lr : __arm_lpae_unmap+0x2cc/0x5a0
<snip>
Call trace:
__arm_lpae_unmap+0x254/0x5a0
__arm_lpae_unmap+0x108/0x5a0
__arm_lpae_unmap+0x108/0x5a0
__arm_lpae_unmap+0x108/0x5a0
arm_lpae_unmap_pages+0x80/0xa0
panthor_vm_unmap_pages+0xac/0x1c8 [panthor]
panthor_gpuva_sm_step_unmap+0x4c/0xc8 [panthor]
op_unmap_cb.isra.23.constprop.30+0x54/0x80
__drm_gpuvm_sm_unmap+0x184/0x1c8
drm_gpuvm_sm_unmap+0x40/0x60
panthor_vm_exec_op+0xa8/0x120 [panthor]
panthor_vm_bind_exec_sync_op+0xc4/0xe8 [panthor]
panthor_ioctl_vm_bind+0x10c/0x170 [panthor]
drm_ioctl_kernel+0xbc/0x138
drm_ioctl+0x210/0x4b0
__arm64_sys_ioctl+0xb0/0xf8
invoke_syscall+0x4c/0x110
el0_svc_common.constprop.1+0x98/0xf8
do_el0_svc+0x24/0x38
el0_svc+0x34/0xc8
el0t_64_sync_handler+0xa0/0xc8
el0t_64_sync+0x174/0x178
<snip>
panthor : [drm] drm_WARN_ON(unmapped_sz != pgsize * pgcount)
WARNING: CPU: 1 PID: 650 at drivers/gpu/drm/panthor/panthor_mmu.c:922 panthor_vm_unmap_pages+0x124/0x1c8 [panthor]
<snip>
pc : panthor_vm_unmap_pages+0x124/0x1c8 [panthor]
lr : panthor_vm_unmap_pages+0x124/0x1c8 [panthor]
<snip>
panthor : [drm] *ERROR* failed to unmap range ffffa388f000-ffffa3890000 (requested range ffffa388c000-ffffa3890000)
Fixes: 647810ec2476 ("drm/panthor: Add the MMU/VM logical block")
Signed-off-by: Akash Goel <akash.goel@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241111134720.780403-1-akash.goel@arm.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
For compiling with W=1, the following warning can be seen:
drivers/md/raid5.c: In function ‘setup_conf’:
drivers/md/raid5.c:2423:12: error: ‘%s’ directive output may be truncated writing up to 31 bytes into a region of size between 16 and 26 [-Werror=format-truncation=]
"raid%d-%s", conf->level, mdname(conf->mddev));
^~
drivers/md/raid5.c:2422:3: note: ‘snprintf’ output between 7 and 48 bytes into a destination of size 32
snprintf(conf->cache_name[0], namelen,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"raid%d-%s", conf->level, mdname(conf->mddev));
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Increase the array size to avoid this warning.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241112161019.4154616-2-john.g.garry@oracle.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
The boolean variable has_affinity is true when desc is non-null and
ops->set_vq_affinity is non-null. Hence the call to create_affinity_masks
does not need to check for desc being non-null is redundant when
has_affinity is true, so it can be removed as well as the now unused
default_affd.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Message-Id: <20241107132114.22188-1-colin.i.king@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
|
|
It is used for testing in tools/virtio/vringh_test.c.
If vring_new_virtqueue supports packed vring, we can add support for
packed vring to vringh and test it.
Signed-off-by: Wenyu Huang <huangwenyu1998@gmail.com>
Message-Id: <20241013033233.65026-1-huangwenyu1998@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Add basic freeze/restore PM callbacks to support hibernation (S4):
- On freeze, delete vq and quiesce the device to prepare for
snapshotting.
- On restore, re-init vq and mark DRIVER_OK.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Message-Id: <20240815004617.2325269-1-philipchen@chromium.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The starting iova address to iterate iotlb map entry within a range
was set to an irrelevant value when passing to the itree_next()
iterator, although luckily it doesn't affect the outcome of finding
out the granule of the smallest iotlb map size. Fix the code to make
it consistent with the following for-loop.
Fixes: 94abbccdf291 ("vdpa/mlx5: Add shared memory registration code")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20241021134040.975221-3-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
When calculating the physical address range based on the iotlb and mr
[start,end) ranges, the offset of mr->start relative to map->start
is not taken into account. This leads to some incorrect and duplicate
mappings.
For the case when mr->start < map->start the code is already correct:
the range in [mr->start, map->start) was handled by a different
iteration.
Fixes: 94abbccdf291 ("vdpa/mlx5: Add shared memory registration code")
Cc: stable@vger.kernel.org
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20241021134040.975221-2-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
There is a strapping issue on NBIO 7.7.0 that can lead to spurious PME
events while in the D0 state.
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20241112161142.28974-1-mario.limonciello@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 447a54a0f79c9a409ceaa17804bdd2e0206397b9)
Cc: stable@vger.kernel.org
|
|
This reverts commit 694c79769cb384bca8b1ec1d1e84156e726bd106.
This was not the root cause. Revert.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3678
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: aurabindo.pillai@amd.com
Cc: hamishclaxton@gmail.com
(cherry picked from commit 3c2296b1eec55b50c64509ba15406142d4a958dc)
Cc: stable@vger.kernel.org # 6.11.x
|
|
The static declaration causes the check to fail. Remove it.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3678
Fixes: 00c391102abc ("drm/amd/display: Add misc DC changes for DCN401")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamish Claxton <hamishclaxton@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: aurabindo.pillai@amd.com
Cc: hamishclaxton@gmail.com
(cherry picked from commit 91314e7dfd83345b8b820b782b2511c9c32866cd)
Cc: stable@vger.kernel.org # 6.11.x
|
|
That is just a waste of time on APUs.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3704
Fixes: 216c1282dde3 ("drm/amdgpu: use GTT only as fallback for VRAM|GTT")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e8fc090d322346e5ce4c4cfe03a8100e31f61c3c)
Cc: stable@vger.kernel.org
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung SoC drivers for v6.13
Add Samsung ChipID driver support for new SoCs: Exynos8895, Exynos990
and Exynos9810.
* tag 'samsung-drivers-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: exynos-chipid: Add support for Exynos9810 SoC
dt-bindings: hwinfo: samsung,exynos-chipid: Add Samsung exynos9810 compatible
soc: samsung: exynos-chipid: Add support for Exynos 990 chipid
dt-bindings: hwinfo: exynos-chipid: Add compatible for Exynos 990 chipid
soc: samsung: exynos-chipid: add exynos8895 SoC support
dt-bindings: hwinfo: samsung,exynos-chipid: add exynos8895 compatible
Link: https://lore.kernel.org/r/20241029081002.21106-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There is a strapping issue on NBIO 7.7.0 that can lead to spurious PME
events while in the D0 state.
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20241112161142.28974-1-mario.limonciello@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 2551b4a321a68134360b860113dd460133e856e5.
This was not the root cause. Revert.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3678
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: aurabindo.pillai@amd.com
Cc: hamishclaxton@gmail.com
|
|
The static declaration causes the check to fail. Remove it.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3678
Fixes: 00c391102abc ("drm/amd/display: Add misc DC changes for DCN401")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamish Claxton <hamishclaxton@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: aurabindo.pillai@amd.com
Cc: hamishclaxton@gmail.com
|
|
That is just a waste of time on APUs.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3704
Fixes: 216c1282dde3 ("drm/amdgpu: use GTT only as fallback for VRAM|GTT")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is for MES to limit only one process for the user queues
Signed-off-by: Shaoyun Liu <shaoyun.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support for I3C device in the tmp108 driver to handle the P3T1085
sensor. Register the I3C device driver to enable I3C functionality for the
sensor.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Message-ID: <20241112-p3t1085-v4-2-a1334314b1e6@nxp.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add help function tmp108_common_probe() to pave road to support i3c for
P3T1085(NXP) chip.
Use dev_err_probe() to simplify the code.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Message-ID: <20241112-p3t1085-v4-1-a1334314b1e6@nxp.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
method
According to the ACPI specification, the _PMD method is optional. The
acpi_power_meter driver shouldn't fail to load if the platform has no
_PMD method.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Message-ID: <20241112021228.22914-1-lihuisong@huawei.com>
[groeck: Reworded commit description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
DIV_ROUND_CLOSEST() after kstrtoul() results in an overflow if a large
number such as 18446744073709551615 is provided by the user.
Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Fixes: c3963bc0a0cf ("hwmon: (nct6775) Split core and platform driver")
Message-ID: <7d5084cea33f7c0fd0578c59adfff71f93de94d9.1731375425.git.xiaopei01@kylinos.cn>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Delta AFC0612DB-F00 fan has to be set to at least 30% PWM duty cycle
to spin up from a stopped state, and can be afterward throttled down to
lower PWM duty cycle. Introduce support for operating such fans which
need to start at higher PWM duty cycle first and can slow down next.
Introduce two new DT properties, "fan-stop-to-start-percent" and
"fan-stop-to-start-us". The former describes the minimum percent
of fan RPM at which it will surely spin up from stopped state. This
value can be found in the fan datasheet and can be converted to PWM
duty cycle easily. The "fan-stop-to-start-us" describes the minimum
time in microseconds for which the fan has to be set to stopped state
start RPM for the fan to surely spin up.
Adjust the PWM setting code such that if the PWM duty cycle is below
the minimum duty cycle needed by the fan to spin up from stopped state,
then first set the PWM duty cycle to the minimum duty cycle needed
by the fan to spin up from stopped state, then wait the time necessary
for the fan to spin up from stopped state, and finally set the PWM duty
cycle to the one desired by user.
Signed-off-by: Marek Vasut <marex@denx.de>
Message-ID: <20241106185925.223736-2-marex@denx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add compatible string 'nxp,p3t1085' since p3t1085's register layout is the
same as tmp108.
The p3t1085 supports I3C interface.
Update document tmp108.rst and Kconfig's help context.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Message-ID: <20241111-p3t1085-v3-2-bff511550aad@nxp.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This prevents use of this driver with ACPI via PRP0001 and
is an example of an anti pattern I'm trying to remove from
the kernel. Hence drop from this driver.
Also switch of.h for mod_devicetable.h include given use of
struct of_device_id which is defined in that header.
Reported-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Closes: https://lore.kernel.org/r/CACSj6VW7WKv5tiAkLCvSujENJvXq1Mc7_7vtkQsRSz3JGY0i3Q@mail.gmail.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-ID: <20241108124348.1392473-1-andriy.shevchenko@linux.intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
pmbus_write_smbalert_mask() ignores the errors if the chip can't set
smbalert mask the standard way. It is not necessarily a problem for the irq
support if the chip is otherwise properly setup but it may leave an
uncleared fault behind.
pmbus_core will pick the fault on the next register_check(). The register
check will fails regardless of the actual register support by the chip.
This leads to missing attributes or debugfs entries for chips that should
provide them.
We cannot rely on register_check() as PMBUS_SMBALERT_MASK may be read-only.
Unconditionally clear the page fault after setting PMBUS_SMBALERT_MASK to
avoid the problem.
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 221819ca4c36 ("hwmon: (pmbus/core) Add interrupt support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Message-ID: <20241105-tps25990-v4-5-0e312ac70b62@baylibre.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use _pmbus_read_byte_data() rather than calling smbus directly to check
the write protection status. This give a chance to device implementing
write protection differently to report back on the actual write protection
status.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Message-ID: <20241105-tps25990-v4-2-0e312ac70b62@baylibre.com>
[groeck: Fix page parameter of _pmbus_read_byte_data()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The write_hint is only used for read/write requests, which must have a
bio attached to them. Just use the bio field instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241112170050.1612998-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch generates the code for the operation of reading data from
the device into a sub-function.
Then, it can be called during the device status data saving phase of
the live migration process and the device status data reading function
in debugfs.
Thereby reducing the redundant code of the driver.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20241112073322.54550-3-liulongfang@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
In the current driver, vdev is obtained from struct
hisi_acc_vf_core_device through the container_of function.
This method is used in many places in the driver. In order to
reduce this repetitive operation, It was extracted into
a public function.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20241112073322.54550-2-liulongfang@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
- fix warnings about duplicate slab cache names
* tag 'for-6.12/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-cache: fix warnings about duplicate slab caches
dm-bufio: fix warnings about duplicate slab caches
|
|
Notice that tt_get_tt_zone() need not use the ret variable in
the tt_thermal_zones list walk and make it return right after
incrementing the reference counter of the matching entry.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/6120304.lOV4Wx5bFT@rjwysocki.net
|
|
Replace the 32-bit MSR access function with a 64-bit variant to simplify
the call site, eliminating unnecessary 32-bit value manipulations.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Link: https://patch.msgid.link/20241106182313.165297-1-chang.seok.bae@intel.com
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/acpi to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/9ee1a9813f53698be62aab9d810b2d97a2a9f186.1731397722.git.u.kleine-koenig@baylibre.com
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
acpi_dev_hid_match() does not check for adev == NULL, dereferencing
it unconditional.
Add a check for adev being NULL before calling acpi_dev_hid_match().
At the moment acpi_quirk_skip_serdev_enumeration() is never called with
a controller_parent without an ACPI companion, but better safe than sorry.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241109220028.83047-1-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Vexia EDU ATLA 10 tablet (9V version) which shipped with Android 4.2
as factory OS has the usual broken DSDT issues for x86 Android tablets.
On top of that this tablet is special because all its LPSS island
peripherals are enumerated as PCI devices rather then as ACPI devices as
they typically are.
For the x86-android-tablets kmod to be able to instantiate a serdev client
for the Bluetooth HCI on this tablet, an ACPI_QUIRK_UART1_SKIP quirk is
necessary.
Modify acpi_dmi_skip_serdev_enumeration() to work with PCI enumerated
UARTs without an UID, such as the UARTs on this tablet.
Also make acpi_dmi_skip_serdev_enumeration() exit early if there are no
quirks, since there is nothing to do then.
And add the necessary quirks for the Vexia EDU ATLA 10 tablet.
This should compile with CONFIG_PCI being unset without issues because
dev_is_pci() is defined as "(false)" then.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241109215936.83004-1-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge the pmdomain fixes for v6.12-rc[n] into the next branch, to allow them
to get tested together with the new changes that are targeted for v6.13.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This adds the RPMHPD present in SM8750 SoCs.
Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Message-ID: <20241112002444.2802092-3-quic_molvera@quicinc.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <20241104190742.276710-1-robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The qcom-cpucp mailbox irq is expected to function during suspend-resume
cycle particularly when the scmi cpufreq driver can query the current
frequency using the get_level message after the cpus are brought up during
resume. Hence mark the irq with IRQF_NO_SUSPEND flag to fix the do_xfer
failures we see during resume.
Err Logs:
arm-scmi firmware:scmi: timed out in resp(caller:do_xfer+0x164/0x568)
cpufreq: cpufreq_online: ->get() failed
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Closes: https://lore.kernel.org/lkml/ZtgFj1y5ggipgEOS@hovoldconsulting.com/
Fixes: 0e2a9a03106c ("mailbox: Add support for QTI CPUCP mailbox controller")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Cc: stable@vger.kernel.org
Message-ID: <20241030125512.2884761-7-quic_sibis@quicinc.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Duplicate opps reported by buggy SCP firmware currently show up
as warnings even though the only functional impact is that the
level/index remain inaccessible. Make it less scary for the end
user by using dev_info instead, along with FW_BUG tag.
Suggested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: stable@vger.kernel.org
Message-ID: <20241030125512.2884761-4-quic_sibis@quicinc.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Buggy firmware can reply with duplicated PERF opps descriptors.
Ensure that the bad duplicates reported by the platform firmware doesn't
get added to the opp-tables.
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Closes: https://lore.kernel.org/lkml/ZoQjAWse2YxwyRJv@hovoldconsulting.com/
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: stable@vger.kernel.org
Message-ID: <20241030125512.2884761-3-quic_sibis@quicinc.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Merge the mmc fixes for v6.12-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.13.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The commit 8396c793ffdf ("mmc: dw_mmc: Fix IDMAC operation with pages
bigger than 4K") increased the max_req_size, even for 4K pages, causing
various issues:
- Panic booting the kernel/rootfs from an SD card on Rockchip RK3566
- Panic booting the kernel/rootfs from an SD card on StarFive JH7100
- "swiotlb buffer is full" and data corruption on StarFive JH7110
At this stage no fix have been found, so it's probably better to just
revert the change.
This reverts commit 8396c793ffdf28bb8aee7cfe0891080f8cab7890.
Cc: stable@vger.kernel.org
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Fixes: 8396c793ffdf ("mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K")
Closes: https://lore.kernel.org/linux-mmc/614692b4-1dbe-31b8-a34d-cb6db1909bb7@w6rz.net/
Closes: https://lore.kernel.org/linux-mmc/CAC8uq=Ppnmv98mpa1CrWLawWoPnu5abtU69v-=G-P7ysATQ2Pw@mail.gmail.com/
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-ID: <20241110114700.622372-1-aurelien@aurel32.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The recent introduction of reset control in pwrseq_simple introduced
a regression for platforms without RESET_CONTROLLER support, because
devm_reset_control_get_optional_shared() would return NULL and make all
resets no-ops. Instead of enforcing this dependency, rely on this behavior
to determine reset support. As a benefit we can get the rid of the
use_reset flag.
Fixes: 73bf4b7381f7 ("mmc: pwrseq_simple: add support for one reset control")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Message-ID: <20241108130647.8281-1-wahrenst@gmx.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Currently, the MMC_CAP2_CRYPTO flag is set by default for eMMC hosts.
However, this flag should not be set for hosts that do not support inline
encryption.
The 'crypto' clock, as described in the documentation, is used for data
encryption and decryption. Therefore, only hosts that are configured with
this 'crypto' clock should have the MMC_CAP2_CRYPTO flag set.
Fixes: 7b438d0377fb ("mmc: mtk-sd: add Inline Crypto Engine clock control")
Fixes: ed299eda8fbb ("mmc: mtk-sd: fix devm_clk_get_optional usage")
Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.com>
Cc: stable@vger.kernel.org
Message-ID: <20241111085039.26527-1-andy-ld.lu@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This reverts commit 02b682d54598f61cbb7dbb14d98ec1801112b878.
Alf reports that this commit causes the connection to eventually die on
iwl4965. The reason is that rx_status.flag is zeroed after
RX_FLAG_FAILED_FCS_CRC is set and mac80211 doesn't know the received frame is
corrupted.
Fixes: 02b682d54598 ("wifi: iwlegacy: do not skip frames with bad FCS")
Reported-by: Alf Marius <post@alfmarius.net>
Closes: https://lore.kernel.org/r/60f752e8-787e-44a8-92ae-48bdfc9b43e7@app.fastmail.com/
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241112142419.1023743-1-kvalo@kernel.org
|
|
Implement the vIOMMU's cache_invalidate op for user space to invalidate
the IOTLB entries, Device ATS and CD entries that are cached by hardware.
Add struct iommu_viommu_arm_smmuv3_invalidate defining invalidation
entries that are simply in the native format of a 128-bit TLBI
command. Scan those commands against the permitted command list and fix
their VMID/SID fields to match what is stored in the vIOMMU.
Link: https://patch.msgid.link/r/12-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com
Co-developed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Co-developed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The EATS flag needs to flow through the vSTE and into the pSTE, and ensure
physical ATS is enabled on the PCI device.
The physical ATS state must match the VM's idea of EATS as we rely on the
VM to issue the ATS invalidation commands. Thus ATS must remain off at the
device until EATS on a nesting domain turns it on. Attaching a nesting
domain is the point where the invalidation responsibility transfers to
userspace.
Update the ATS logic to track EATS for nesting domains and flush the
ATC whenever the S2 nesting parent changes.
Link: https://patch.msgid.link/r/11-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Force Write Back (FWB) changes how the S2 IOPTE's MemAttr field
works. When S2FWB is supported and enabled the IOPTE will force cachable
access to IOMMU_CACHE memory when nesting with a S1 and deny cachable
access when !IOMMU_CACHE.
When using a single stage of translation, a simple S2 domain, it doesn't
change things for PCI devices as it is just a different encoding for the
existing mapping of the IOMMU protection flags to cachability attributes.
For non-PCI it also changes the combining rules when incoming transactions
have inconsistent attributes.
However, when used with a nested S1, FWB has the effect of preventing the
guest from choosing a MemAttr in it's S1 that would cause ordinary DMA to
bypass the cache. Consistent with KVM we wish to deny the guest the
ability to become incoherent with cached memory the hypervisor believes is
cachable so we don't have to flush it.
Allow NESTED domains to be created if the SMMU has S2FWB support and use
S2FWB for NESTING_PARENTS. This is an additional option to CANWBS.
Link: https://patch.msgid.link/r/10-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Donald Dutile <ddutile@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
For SMMUv3 a IOMMU_DOMAIN_NESTED is composed of a S2 iommu_domain acting
as the parent and a user provided STE fragment that defines the CD table
and related data with addresses translated by the S2 iommu_domain.
The kernel only permits userspace to control certain allowed bits of the
STE that are safe for user/guest control.
IOTLB maintenance is a bit subtle here, the S1 implicitly includes the S2
translation, but there is no way of knowing which S1 entries refer to a
range of S2.
For the IOTLB we follow ARM's guidance and issue a CMDQ_OP_TLBI_NH_ALL to
flush all ASIDs from the VMID after flushing the S2 on any change to the
S2.
The IOMMU_DOMAIN_NESTED can only be created from inside a VIOMMU as the
invalidation path relies on the VIOMMU to translate virtual stream ID used
in the invalidation commands for the CD table and ATS.
Link: https://patch.msgid.link/r/9-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
