| Age | Commit message (Collapse) | Author |
|---|
|
The commit a22bd630cfff ("can: hi311x: do not report txerr and rxerr
during bus-off") removed the reporting of rxerr and txerr even in case
of correct operation (i. e. not bus-off).
The error count information added to the CAN frame after netif_rx() is
a potential use after free, since there is no guarantee that the skb
is in the same state. It might be freed or reused.
Fix the issue by postponing the netif_rx() call in case of txerr and
rxerr reporting.
Fixes: a22bd630cfff ("can: hi311x: do not report txerr and rxerr during bus-off")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://patch.msgid.link/20241122221650.633981-5-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Call the function can_change_state() if the allocation of the skb
fails, as it handles the cf parameter when it is null.
Additionally, this ensures that the statistics related to state error
counters (i. e. warning, passive, and bus-off) are updated.
Fixes: 0738eff14d81 ("can: Allwinner A10/A20 CAN Controller support - Kernel module")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://patch.msgid.link/20241122221650.633981-3-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Ensure that the statistics are always updated, even if the skb
allocation fails.
Fixes: 4d6d26537940 ("can: c_can: fix {rx,tx}_errors statistics")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://patch.msgid.link/20241122221650.633981-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Set the initial eee_cfg values to have 'ethtool --show-eee ' display
the initial EEE configuration.
Fixes: 49168d1980e2 ("net: phy: Add phy_support_eee() indicating MAC support EEE")
Cc: <stable@vger.kernel.org>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241120083818.1079456-1-yong.liang.choong@linux.intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is an approach made to implement gs_usb firmware/driver based on
Zephyr RTOS. It was found that USB stack of Zephyr RTOS overwrites USB
EP addresses, if they have different last 4 bytes in absence of other
endpoints.
For example in case of gs_usb candlelight firmware EP-IN is 0x81 and
EP-OUT 0x02. If there are no additional USB endpoints, Zephyr RTOS will
overwrite EP-OUT to 0x01. More information can be found in the
discussion with Zephyr RTOS USB stack maintainer here:
https://github.com/zephyrproject-rtos/zephyr/issues/67812
There are already two different gs_usb FW driver implementations based
on Zephyr RTOS:
1. https://github.com/CANnectivity/cannectivity
(by: https://github.com/henrikbrixandersen)
2. https://github.com/zephyrproject-rtos/zephyr/compare/main...KozhinovAlexander:zephyr:gs_usb
(by: https://github.com/KozhinovAlexander)
At the moment both Zephyr RTOS implementations use dummy USB endpoint,
to overcome described USB stack behavior from Zephyr itself. Since
Zephyr RTOS is intended to be used on microcontrollers with very
constrained amount of resources (ROM, RAM) and additional endpoint
requires memory, it is more convenient to update the gs_usb driver in
the Linux kernel.
To fix this problem, update the gs_usb driver from using hard coded
endpoint numbers to evaluate the endpoint descriptors and use the
endpoints provided there.
Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Alexander Kozhinov <ak.alexander.kozhinov@gmail.com>
Link: https://patch.msgid.link/20241018212450.31746-1-ak.alexander.kozhinov@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
In commit 6e86a1543c37 ("can: dev: provide optional GPIO based
termination support") GPIO based termination support was added.
For no particular reason that patch uses gpiod_set_value() to set the
GPIO. This leads to the following warning, if the systems uses a
sleeping GPIO, i.e. behind an I2C port expander:
| WARNING: CPU: 0 PID: 379 at /drivers/gpio/gpiolib.c:3496 gpiod_set_value+0x50/0x6c
| CPU: 0 UID: 0 PID: 379 Comm: ip Not tainted 6.11.0-20241016-1 #1 823affae360cc91126e4d316d7a614a8bf86236c
Replace gpiod_set_value() by gpiod_set_value_cansleep() to allow the
use of sleeping GPIOs.
Cc: Nicolai Buchwitz <nb@tipi-net.de>
Cc: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Cc: stable@vger.kernel.org
Reported-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Tested-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Fixes: 6e86a1543c37 ("can: dev: provide optional GPIO based termination support")
Link: https://patch.msgid.link/20241121-dev-fix-can_set_termination-v1-1-41fa6e29216d@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Previously, when the hardware version ID was determined to be invalid,
only an error message was printed without any further handling. Therefore,
this patch makes the necessary corrections to address this.
Fixes: a36e9f5cfe9e ("rtase: Add support for a pci table in this module")
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Previously, the reported speed was uniformly set to SPEED_5000, but the
RTL907XD-V1 actually operates at a speed of SPEED_10000. Therefore, this
patch makes the necessary correction.
Fixes: dd7f17c40fd1 ("rtase: Implement ethtool function")
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Different hardware requires different configurations, but this distinction
was not made previously. Additionally, the error message was not clear
enough. Therefore, this patch will address the issues mentioned above.
Fixes: a36e9f5cfe9e ("rtase: Add support for a pci table in this module")
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- remove unused functions and variables
- rate-limit error messages in syslog
- fix typo
- remove u64 alignment requirement for murmurhash
- reset bi_ioprio to the default for dm-vdo
- add support for get_unique_id
- Add missing destroy_work_on_stack() to dm-thin
- use kmalloc to allocate power-of-two sized buffers in bufio
* tag 'for-6.13/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-verity: remove the unused "data_start" variable
dm-bufio: use kmalloc to allocate power-of-two sized buffers
dm thin: Add missing destroy_work_on_stack()
dm: add support for get_unique_id
dm vdo: fix function doc comment formatting
dm vdo int-map: remove unused parameters
dm-vdo: reset bi_ioprio to the default value when the bio is reset
dm-vdo murmurhash: remove u64 alignment requirement
dm: Fix typo in error message
dm ioctl: rate limit a couple of ioctl based error messages
dm vdo: Remove unused uds_compute_index_size
dm vdo: Remove unused functions
dm: zoned: Remove unused functions
dm: Remove unused dm_table_bio_based
dm: Remove unused dm_set_md_type
dm cache: Remove unused functions in bio-prison-v1
dm cache: Remove unused dm_cache_size
dm cache: Remove unused dm_cache_dump
dm cache: Remove unused btracker_nr_writebacks_queued
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, hisi_sas, st).
Amazingly enough, no core changes with the biggest set of driver
changes being ufs (which conflicted with it's own fixes a bit, hence
the merges) and the rest being minor fixes and updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (97 commits)
scsi: st: New session only when Unit Attention for new tape
scsi: st: Add MTIOCGET and MTLOAD to ioctls allowed after device reset
scsi: st: Don't modify unknown block number in MTIOCGET
scsi: ufs: core: Restore SM8650 support
scsi: sun3: Mark driver struct with __refdata to prevent section mismatch
scsi: sg: Enable runtime power management
scsi: qedi: Fix a possible memory leak in qedi_alloc_and_init_sb()
scsi: qedf: Fix a possible memory leak in qedf_alloc_and_init_sb()
scsi: fusion: Remove unused variable 'rc'
scsi: bfa: Fix use-after-free in bfad_im_module_exit()
scsi: esas2r: Remove unused esas2r_build_cli_req()
scsi: target: Fix incorrect function name in pscsi_create_type_disk()
scsi: ufs: Replace deprecated PCI functions
scsi: Switch back to struct platform_driver::remove()
scsi: pm8001: Increase request sg length to support 4MiB requests
scsi: pm8001: Initialize devices in pm8001_alloc_dev()
scsi: pm8001: Use module param to set pcs event log severity
scsi: ufs: ufs-mediatek: Configure individual LU queue flags
scsi: MAINTAINERS: Update UFS Exynos entry
scsi: lpfc: Copyright updates for 14.4.0.6 patches
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull nvdimm and DAX updates from Ira Weiny:
"Most represent minor cleanups and code removals. One patch fixes
potential NULL pointer arithmetic which was benign because the offset
of the member was 0. Nevertheless it should be cleaned up.
- typo fixes
- clarify logic to remove potential NULL pointer math
- remove dead code"
* tag 'libnvdimm-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: Remove an unused field in struct dax_operations
dax: delete a stale directory pmem
nvdimm: rectify the illogical code within nd_dax_probe()
nvdimm: Correct some typos in comments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
"Common:
- switch back from remove_new() to remove() callback
imx:
- fix format specifier
zynqmp:
- setup IPI for each child node
thead:
- Add th1520 driver and bindings
qcom:
- add SM8750 and SAR2130p compatibles
- fix expected clocks for callbacks
- use IRQF_NO_SUSPEND for cpucp
mtk-cmdq:
- switch to __pm_runtime_put_autosuspend()
- fix alloc size of clocks
mpfs:
- fix reg properties
ti-msgmgr:
- don't use of_match_ptr helper
- enable COMPILE_TEST build
pcc:
- consider the PCC_ACK_FLAG
arm_mhuv2:
- fix non-fatal improper reuse of variable"
* tag 'mailbox-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox: pcc: Check before sending MCTP PCC response ACK
mailbox: Switch back to struct platform_driver::remove()
mailbox: imx: Modify the incorrect format specifier
mailbox: arm_mhuv2: clean up loop in get_irq_chan_comb()
mailbox: zynqmp: setup IPI for each valid child node
dt-bindings: mailbox: Add thead,th1520-mailbox bindings
mailbox: Introduce support for T-head TH1520 Mailbox driver
mailbox: mtk-cmdq: fix wrong use of sizeof in cmdq_get_clocks()
dt-bindings: mailbox: qcom-ipcc: Add SM8750
dt-bindings: mailbox: qcom,apcs-kpss-global: correct expected clocks for fallbacks
dt-bindings: mailbox: qcom-ipcc: Add SAR2130P compatible
mailbox: ti-msgmgr: Allow building under COMPILE_TEST
mailbox: ti-msgmgr: Remove use of of_match_ptr() helper
mailbox: qcom-cpucp: Mark the irq with IRQF_NO_SUSPEND flag
mailbox: mtk-cmdq-mailbox: Switch to __pm_runtime_put_autosuspend()
mailbox: mpfs: support new, syscon based, devicetree configuration
dt-bindings: mailbox: mpfs: fix reg properties
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time.
New drivers:
- Xlinix Versal pin control driver
- Ocelot LAN969x pin control driver
- T-Head TH1520 RISC-V SoC pin control driver
- Qualcomm SM8750, IPQ5424, QCS8300, SAR2130P and QCS615 SoC pin
control drivers
- Qualcomm SM8750 LPASS (low power audio subsystem) pin control
driver
- Qualcomm PM8937 mixsig IC pin control support, GPIO and MPP
(multi-purpose-pin)
- Samsung Exynos8895 and Exynos9810 SoC pin control driver
- SpacemiT K1 SoC pin control driver
- Airhoa EN7581 IC pin control driver
Improvements:
- The Renesas subdriver now supports schmitt-trigger and open drain
pin configurations if the hardware supports it
- Support GPIOF and GPIOG banks in the Aspeed G6 SoC
- Support the DSW community in the Intel Elkhartlake SoC"
* tag 'pinctrl-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits)
pinctrl: airoha: Use unsigned long for bit search
pinctrl: k210: Undef K210_PC_DEFAULT
pinctrl: qcom: spmi: fix debugfs drive strength
pinctrl: qcom: Add sm8750 pinctrl driver
dt-bindings: pinctrl: qcom: Add sm8750 pinctrl
pinctrl: cy8c95x0: remove unneeded goto labels
pinctrl: cy8c95x0: embed iterator to the for-loop
pinctrl: cy8c95x0: Use temporary variable for struct device
pinctrl: cy8c95x0: use flexible sleeping in reset function
pinctrl: cy8c95x0: switch to using devm_regulator_get_enable()
pinctrl: cy8c95x0: Use 2-argument strscpy()
dt-bindings: pinctrl: sx150xq: allow gpio line naming
pinctrl: single: add marvell,pxa1908-padconf compatible
dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible
dt-bindings: pinctrl: correct typo of description for cv1800
pinctrl: qcom: spmi-mpp: Add PM8937 compatible
dt-bindings: pinctrl: qcom,pmic-mpp: Document PM8937 compatible
pinctrl: qcom-pmic-gpio: add support for PM8937
dt-bindings: pinctrl: qcom,pmic-gpio: add PM8937
pinctrl: Use of_property_present() for non-boolean properties
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
"Andi was super busy the last weeks, so this pull requests contains one
series (nomadik) and a number of smaller additions which were ready to
go but nearly overlooked.
New feature support:
- Added support for frequencies up to 3.4 MHz on Nomadik I2C
- DesignWare now accounts for bus capacitance and clock optimisation
(declared as new parameters in the binding) to improve the
calculation of signal rise and fall times (t_high and t_low)
New Hardware support:
- DWAPB I2C controller on FUJITSU-MONAKA (new ACPI HID)
- Allwinner A523 (new compatible ID)
- Mobileye EyeQ6H (new compatible ID)"
* tag 'i2c-for-6.13-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: transfer i2c-aspeed maintainership from Brendan to Ryan
i2c: designware: determine HS tHIGH and tLOW based on HW parameters
dt-bindings: i2c: snps,designware-i2c: declare bus capacitance and clk freq optimized
i2c: nomadik: support >=1MHz speed modes
i2c: nomadik: fix BRCR computation
i2c: nomadik: support Mobileye EyeQ6H I2C controller
i2c: nomadik: switch from of_device_is_compatible() to of_match_device()
dt-bindings: i2c: nomadik: support 400kHz < clock-frequency <= 3.4MHz
dt-bindings: i2c: nomadik: add mobileye,eyeq6h-i2c bindings
dt-bindings: i2c: mv64xxx: Add Allwinner A523 compatible string
i2c: designware: Add ACPI HID for DWAPB I2C controller on FUJITSU-MONAKA
i2c: qup: use generic device property accessors
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"A few updates for the 6.13 kernel, including some typo corrections in
the software stack and some fixes for tools. Additionally, it includes
a change resulting from the deprecation of a kernel API in the PCI
subsystem"
* tag 'firewire-updates-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
tools/firewire: Fix several incorrect format specifiers
firewire: ohci: Replace deprecated PCI functions
firewire: Correct some typos
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- The series "resource: A couple of cleanups" from Andy Shevchenko
performs some cleanups in the resource management code
- The series "Improve the copy of task comm" from Yafang Shao addresses
possible race-induced overflows in the management of
task_struct.comm[]
- The series "Remove unnecessary header includes from
{tools/}lib/list_sort.c" from Kuan-Wei Chiu adds some cleanups and a
small fix to the list_sort library code and to its selftest
- The series "Enhance min heap API with non-inline functions and
optimizations" also from Kuan-Wei Chiu optimizes and cleans up the
min_heap library code
- The series "nilfs2: Finish folio conversion" from Ryusuke Konishi
finishes off nilfs2's folioification
- The series "add detect count for hung tasks" from Lance Yang adds
more userspace visibility into the hung-task detector's activity
- Apart from that, singelton patches in many places - please see the
individual changelogs for details
* tag 'mm-nonmm-stable-2024-11-24-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits)
gdb: lx-symbols: do not error out on monolithic build
kernel/reboot: replace sprintf() with sysfs_emit()
lib: util_macros_kunit: add kunit test for util_macros.h
util_macros.h: fix/rework find_closest() macros
Improve consistency of '#error' directive messages
ocfs2: fix uninitialized value in ocfs2_file_read_iter()
hung_task: add docs for hung_task_detect_count
hung_task: add detect count for hung tasks
dma-buf: use atomic64_inc_return() in dma_buf_getfile()
fs/proc/kcore.c: fix coccinelle reported ERROR instances
resource: avoid unnecessary resource tree walking in __region_intersects()
ocfs2: remove unused errmsg function and table
ocfs2: cluster: fix a typo
lib/scatterlist: use sg_phys() helper
checkpatch: always parse orig_commit in fixes tag
nilfs2: convert metadata aops from writepage to writepages
nilfs2: convert nilfs_recovery_copy_block() to take a folio
nilfs2: convert nilfs_page_count_clean_buffers() to take a folio
nilfs2: remove nilfs_writepage
nilfs2: convert checkpoint file to be folio-based
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Disable __counted_by in Clang < 19.1.3 (Jan Hendrik Farr)
- string_helpers: Silence output truncation warning (Bartosz
Golaszewski)
- compiler.h: Avoid needing BUILD_BUG_ON_ZERO() (Philipp Reisner)
- MAINTAINERS: Add kernel hardening keywords __counted_by{_le|_be}
(Thorsten Blum)
* tag 'hardening-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Compiler Attributes: disable __counted_by for clang < 19.1.3
compiler.h: Fix undefined BUILD_BUG_ON_ZERO()
lib: string_helpers: silence snprintf() output truncation warning
MAINTAINERS: Add kernel hardening keywords __counted_by{_le|_be}
|
|
The undervoltage flags reported by the RTC are useful to know if the
time and date are reliable after a reboot. Although the threshold VLOW1
indicates that the thermometer has been shutdown and time compensation
is off, it doesn't mean that the temperature readout is currently
impossible.
As the system is running, the RTC voltage is now fully established and
we can read the temperature.
Fixes: 67075b63cce2 ("rtc: add AB-RTCMC-32.768kHz-EOZ9 RTC support")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://lore.kernel.org/r/20241122101031.68916-3-maxime.chevallier@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
This RTC has special 32bit registers which return multiple of the same
8bit registers at once. Use these to minimize register access. Also, do
the to/from BCD conversions right away, so 'tm' always contains values
as described in time.h.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20241122101448.4374-3-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The week register simply counts from 0 to 6 where the numbers do not
even represent a specific weekday. So we can adopt 'tm_wday' numbering
of the RTC core without converting it.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20241122101448.4374-2-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
- omapfb: Remove unused code (Dr. David Alan Gilbert)
- sh7760fb: Fix memory leak in error path of sh7760fb_alloc_mem() (Zhen
Lei)
* tag 'fbdev-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: omapfb: Remove some deadcode
fbdev: sh7760fb: Fix a possible memory leak in sh7760fb_alloc_mem()
|
|
- Fix typos and whitespace errors (Bjorn Helgaas)
* pci/typos:
PCI: Fix typos
|
|
- Reorganize kerneldoc parameter names to match order in function signature
(Julia Lawall)
- Remove kerneldoc return value descriptions from hotplug registration
interfaces that don't return anything (Ilpo Järvinen)
- Fix sysfs reset_method_store() memory leak (Todd Kjos)
- Simplify pci_create_slot() (Ilpo Järvinen)
- Fix incorrect printf format specifiers in pcitest (Luo Yifan)
* pci/misc:
tools: PCI: Fix incorrect printf format specifiers
PCI: Simplify pci_create_slot() logic
PCI: Fix reset_method_store() memory leak
PCI: hotplug: Remove "Returns" kerneldoc from void functions
PCI: hotplug: Reorganize kerneldoc parameter names
|
|
- Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel)
* pci/controller/vmd:
PCI: vmd: Add DID 8086:B06F and 8086:B60B for Intel client SKUs
|
|
- Move endpoint controller cleanups that depend on refclk from the host to
the notifier that tells us the host has deasserted PERST# (Manivannan
Sadhasivam)
* pci/controller/tegra194:
PCI: tegra194: Move controller cleanups to pex_ep_event_pex_rst_deassert()
|
|
- Fix address translation unit programming (Damien Le Moal)
- Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint .align
value (Damien Le Moal)
- When unmapping an endpoint window, compute the region index instead of
searching for it, and verify that the address was mapped (Damien Le Moal)
- When mapping an endpoint window, verify that the address hasn't been
mapped already (Damien Le Moal)
- Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal)
- Fix MSI IRQ data mapping to observe the alignment constraint, which fixes
intermittent page faults in memcpy_toio() and memcpy_fromio() (Damien Le
Moal)
- Rename rockchip_pcie_parse_ep_dt() to rockchip_pcie_ep_get_resources()
for consistency with similar DT interfaces (Damien Le Moal)
- Factor out memory allocations to tidy rockchip_pcie_ep_probe() (Damien Le
Moal)
- Factor out MSI-X quirk to tidy rockchip_pcie_ep_probe() (Damien Le Moal)
- Skip the unnecessary link train in rockchip_pcie_ep_probe() and only in
the endpoint start operation (Damien Le Moal)
- Implement pci_epc_ops.stop_link() to disable link training and controller
configuration (Damien Le Moal)
- Attempt link training at 5 GT/s when both partners support it (Damien Le
Moal)
- Add a handler for PERST# signal so we can detect host resets and start
link training when exiting reset (Damien Le Moal)
* pci/controller/rockchip:
PCI: rockchip-ep: Handle PERST# signal in EP mode
PCI: rockchip-ep: Improve link training
PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation
PCI: rockchip-ep: Refactor endpoint link training enable
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt()
PCI: rockchip-ep: Fix MSI IRQ data mapping
PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation
PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
PCI: rockchip-ep: Use a macro to define EP controller .align feature
PCI: rockchip-ep: Fix address translation unit programming
|
|
- Enable MSI interrupts if 'global' IRQ is supported, since a previous
commit unintentionally masked them (Manivannan Sadhasivam)
- Move endpoint controller cleanups that depend on refclk from the host to
the notifier that tells us the host has deasserted PERST# (Manivannan
Sadhasivam)
- Add DT binding and driver support for IPQ9574, with Synopsys IP v5.80a
and Qcom IP 1.27.0 (devi priya)
- Move the OPP "operating-points-v2" table from the qcom,pcie-sm8450.yaml
DT binding to qcom,pcie-common.yaml, where it can be used by other Qcom
platforms (Qiang Yu)
- Add 'global' SPI interrupt for events like link-up, link-down to
qcom,pcie-x1e80100 DT binding so we can start enumeration when the link
comes up (Qiang Yu)
- Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned to
support this (Qiang Yu)
- Add ops_1_21_0 for SC8280X family SoC, which doesn't use the 'iommu-map'
DT property and doesn't need BDF-to-SID translation (Qiang Yu)
* pci/controller/qcom:
PCI: qcom: Disable ASPM L0s for X1E80100
PCI: qcom: Remove BDF2SID mapping config for SC8280X family SoC
dt-bindings: PCI: qcom,pcie-x1e80100: Add 'global' interrupt
dt-bindings: PCI: qcom: Move OPP table to qcom,pcie-common.yaml
PCI: qcom: Add support for IPQ9574
dt-bindings: PCI: qcom: Document the IPQ9574 PCIe controller
PCI: qcom-ep: Move controller cleanups to qcom_pcie_perst_deassert()
PCI: qcom: Enable MSI interrupts together with Link up if 'Global IRQ' is supported
|
|
- Add DT and driver support for using either of the two PolarFire Root
Ports (Conor Dooley)
* pci/controller/microchip:
PCI: microchip: Add support for using either Root Port 1 or 2
dt-bindings: PCI: microchip,pcie-host: Add reg for Root Port 2
|
|
- Add support for DT 'max-link-speed' and 'num-lanes' properties to
restrict the link speed and width (AngeloGioacchino Del Regno)
* pci/controller/mediatek:
PCI: mediatek-gen3: Remove unneeded semicolon
PCI: mediatek-gen3: Add support for restricting link width
PCI: mediatek-gen3: Add support for setting max-link-speed limit
|
|
- Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root Complex
mode (Kishon Vijay Abraham I)
- Try to avoid unrecoverable SError for attempts to issue config
transactions when the link is down; this is racy but the best we can do
(Kishon Vijay Abraham I)
* pci/controller/keystone:
PCI: keystone: Add link up check to ks_pcie_other_map_bus()
PCI: keystone: Set mode as Root Complex for "ti,keystone-pcie" compatible
|
|
- Add PCIe support for J722S SoC (Siddharth Vadapalli)
- Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100 us),
before deasserting PERST# to ensure power and refclk are stable
(Siddharth Vadapalli)
* pci/controller/j721e:
PCI: j721e: Deassert PERST# after a delay of PCIE_T_PVPERL_MS milliseconds
PCI: j721e: Add PCIe support for J722S SoC
|
|
- Fix suspend/resume support on i.MX6QDL, which has a hardware erratum that
prevents use of L2 (Stefan Eichenberger)
* pci/controller/imx6:
PCI: imx6: Fix suspend/resume support on i.MX6QDL
|
|
- Clear outbound address on unmap so dw_pcie_find_index() won't match an
ATU index that was already unmapped (Damien Le Moal)
- Use of_property_present() instead of of_property_read_bool() when testing
for presence of non-boolean DT properties (Rob Herring)
- Advertise 1MB size if endpoint supports Resizable BARs, which was
inadvertently lost in v6.11 (Niklas Cassel)
* pci/controller/dwc:
PCI: dwc: ep: Fix advertised resizable BAR size regression
PCI: dwc: Use of_property_present() for non-boolean properties
PCI: dwc: endpoint: Clear outbound address on unmap
|
|
- Lower severity of 'phy-names' message (Bartosz Wawrzyniak)
* pci/controller/cadence:
PCI: cadence: Lower severity of message when phy-names property is absent in DTS
|
|
- Add pci_epc_function_is_valid() to avoid repeating common validation
checks (Damien Le Moal)
- Skip attempts to allocate from endpoint controller memory window if the
requested size is larger than the window (Damien Le Moal)
- Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to handle
controller-specific size and alignment constraints, and add test cases to
the endpoint test driver (Damien Le Moal)
- Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can observe
DWC-specific alignment requirements (Damien Le Moal)
- Synchronously cancel command handler work in endpoint test before
cleaning up DMA and BARs (Damien Le Moal)
- Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas Cassel)
- Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent (Niklas
Cassel)
- Remove superfluous 'return' from pci_epf_test_clean_dma_chan() (Wang
Jiang)
- Avoid NULL dereference if Modem Host Interface Endpoint lacks 'mmio' DT
property (Zhongqiu Han)
- Release PCI domain ID of Endpoint controller parent (not controller
itself) and before unregistering the controller, to avoid use-after-free
(Zijun Hu)
- Clear secondary (not primary) EPC in pci_epc_remove_epf() when removing
the secondary controller associated with an NTB (Zijun Hu)
- Fix pci_epc_map map_size kerneldoc (Rick Wertenbroek)
* pci/endpoint:
PCI: endpoint: Fix pci_epc_map map_size kerneldoc string
PCI: endpoint: Clear secondary (not primary) EPC in pci_epc_remove_epf()
PCI: endpoint: Fix PCI domain ID release in pci_epc_destroy()
PCI: endpoint: epf-mhi: Avoid NULL dereference if DT lacks 'mmio'
PCI: endpoint: Remove surplus return statement from pci_epf_test_clean_dma_chan()
PCI: dwc: ep: Use align addr function for dw_pcie_ep_raise_{msi,msix}_irq()
PCI: endpoint: test: Synchronously cancel command handler work
PCI: dwc: endpoint: Implement the pci_epc_ops::align_addr() operation
PCI: endpoint: test: Use pci_epc_mem_map/unmap()
PCI: endpoint: Update documentation
PCI: endpoint: Introduce pci_epc_mem_map()/unmap()
PCI: endpoint: Improve pci_epc_mem_alloc_addr()
PCI: endpoint: Introduce pci_epc_function_is_valid()
|
|
- Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise and ACS
capability but do isolate functions as though PCI_ACS_RR and PCI_ACS_CR
were set, so the functions can be in independent IOMMU groups (Mengyuan
Lou)
* pci/virtualization:
PCI: Add ACS quirk for Wangxun FF5xxx NICs
|
|
- Add and document TLP Processing Hints (TPH) support so drivers can enable
and disable TPH and the kernel can save/restore TPH configuration (Wei
Huang)
- Add TPH Steering Tag support so drivers can retrieve Steering Tag values
associated with specific CPUs via an ACPI _DSM to direct DMA writes
closer to their consumers (Wei Huang)
* pci/tph:
PCI/TPH: Add TPH documentation
PCI/TPH: Add Steering Tag support
PCI: Add TLP Processing Hints (TPH) support
|
|
- Detect some Thunderbolt chips that are built-in and hence 'trustworthy'
by a heuristic since the 'ExternalFacingPort' and 'usb4-host-interface'
ACPI properties are not quite enough (Esther Shimanovich)
* pci/thunderbolt:
PCI: Detect and trust built-in Thunderbolt chips
|
|
- Add resource_set_size() to set resource size when start has already been
set (Ilpo Järvinen)
- Add resource_set_range() helper to set both resource start and size (Ilpo
Järvinen)
- Use IS_ALIGNED() and resource_size() in quirk_s3_64M() instead of
open-coding them (Ilpo Järvinen)
- Add ALIGN_DOWN_IF_NONZERO() to avoid code duplication when distributing
resources across devices (Ilpo Järvinen)
- Improve pdev_sort_resources() warning message to be more specific (Ilpo
Järvinen)
* pci/resource:
PCI: Improve pdev_sort_resources() warning message
PCI: Add ALIGN_DOWN_IF_NONZERO() helper
PCI: Use align and resource helpers, and SZ_* in quirk_s3_64M()
PCI: Use resource_set_{range,size}() helpers
resource: Add resource set range and size helpers
|
|
- Add sysfs 'reset_subordinate' to reset hierarchy below bridge (Keith
Busch)
- Warn if we reset a running device where driver didn't register
pci_error_handlers notification callbacks (Keith Busch)
* pci/reset:
PCI: Warn if a running device is unaware of reset
PCI: Add 'reset_subordinate' to reset hierarchy below bridge
|
|
- Use of_platform_device_create() instead of of_platform_populate() to
create pwrctl platform devices so we can control it based on the child
nodes (Manivannan Sadhasivam)
- Create pwrctrl platform devices only if there's a relevant power supply
property (Manivannan Sadhasivam)
- Add device link from the pwrctl supplier to the PCI dev to ensure pwrctl
drivers are probed before the PCI dev driver; this avoids a race where
pwrctl could change device power state while the PCI driver was active
(Manivannan Sadhasivam)
- Find pwrctl device for removal with of_find_device_by_node() instead of
searching all children of the parent (Manivannan Sadhasivam)
- Rename 'pwrctl' to 'pwrctrl' to use the same 'ctrl' suffix as 'bwctrl'
and other PCI files to reduce confusion (Bjorn Helgaas)
* pci/pwrctl:
PCI/pwrctrl: Rename pwrctrl functions and structures
PCI/pwrctrl: Rename pwrctl files to pwrctrl
PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers
PCI/pwrctl: Create pwrctl device only if at least one power supply is present
PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
# Conflicts:
# drivers/pci/bus.c
# drivers/pci/remove.c
|
|
- Enable starfive controller runtime PM before probing host bridge (Mayank
Rana)
- Enable runtime power management for host bridges (Krishna chaitanya
chundru)
* pci/pm:
PCI: Enable runtime PM of the host bridge
PCI: starfive: Enable controller runtime PM before probing host bridge
|
|
- Use PCI bus addresses (not CPU addresses) in 'ranges' properties when
building dynamic DT nodes so systems where the PCI and CPU addresses
space differ work correctly (Andrea della Porta)
* pci/of:
PCI: of_property: Assign PCI instead of CPU bus address to dynamic PCI nodes
|
|
- Make pci_stop_dev() and pci_destroy_dev() concurrent safe (Keith Busch)
- Move __pci_walk_bus() mutex up into the caller, which avoids the need for
a parameter to control locking (Keith Busch)
- Simplify __pci_walk_bus() by making it recursive (Keith Busch)
- Unexport pci_walk_bus_locked(), which is only used internally by the PCI
core (Keith Busch)
* pci/locking:
PCI: Unexport pci_walk_bus_locked()
PCI: Convert __pci_walk_bus() to be recursive
PCI: Move __pci_walk_bus() mutex to where we need it
PCI: Make pci_destroy_dev() concurrent safe
PCI: Make pci_stop_dev() concurrent safe
|
|
- Add hotplug controller driver for Marvell OCTEON multi-function device
where function 0 has a management console interface to enable/disable and
provision various personalities for the other functions (Shijith Thotton)
* pci/hotplug-octeon:
PCI: hotplug: Add OCTEON PCI hotplug controller driver
|
|
- Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test
(Guilherme Giacomo Simoes)
- Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET)
- Clean up cpqphp PCIBIOS_* return value confusion (Ilpo Järvinen)
- Use pci_bus_read_dev_vendor_id() instead of hand-coded presence detection
in cpqphp (Ilpo Järvinen)
- Simplify cpqphp enumeration, which is already simple-minded and doesn't
handle devices below hot-added bridges (Ilpo Järvinen)
- Retain a reference to the pci_bus for the lifetime of a pci_slot to avoid
a use-after-free when the thunderbolt driver resets USB4 host routers on
boot, causing hotplug remove/add of downstream docks or other devices
(Lukas Wunner)
* pci/hotplug:
PCI: Fix use-after-free of slot->bus on hot remove
PCI: cpqphp: Simplify PCI_ScanBusForNonBridge()
PCI: cpqphp: Use define to read class/revision dword
PCI: cpqphp: Use pci_bus_read_dev_vendor_id() to detect presence
PCI: cpqphp: Fix PCIBIOS_* return value confusion
PCI: cpqphp: Remove unused struct ctrl_dbg.ctrl
PCI: cpcihp: Remove unused struct cpci_hp_controller_ops.hardware_test
|
|
- Simplify pci_read_bridge_bases() logic (Ilpo Järvinen)
* pci/enumeration:
PCI: Simplify pci_read_bridge_bases() logic
PCI: Move struct pci_bus_resource into bus.c
PCI: Remove unused PCI_SUBTRACTIVE_DECODE
|
|
- Convert driver .remove_new() callbacks to .remove() again to finish the
conversion from returning 'int' to being 'void' (Sergio Paracuellos)
* pci/driver-remove:
PCI: acpiphp_ampere_altra: Switch back to struct platform_driver::remove()
PCI: controller: Switch back to struct platform_driver::remove()
|
|
- Export pcim_request_all_regions(), a managed interface to request all
BARs (Philipp Stanner)
- Replace pcim_iomap_regions_request_all() with pcim_request_all_regions(),
and pcim_iomap_table()[n] with pcim_iomap(n), in the following drivers:
ahci, crypto qat, crypto octeontx2, intel_th, iwlwifi, ntb idt, serial
rp2, ALSA korg1212 (Philipp Stanner)
- Remove the now unused pcim_iomap_regions_request_all() (Philipp Stanner)
- Export pcim_iounmap_region(), a managed interface to unmap and release a
PCI BAR (Philipp Stanner)
- Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and
pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the following
drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield, cavium (Philipp
Stanner)
* pci/devm:
ethernet: cavium: Replace deprecated PCI functions
gpio: Replace deprecated PCI functions
fpga/dfl-pci.c: Replace deprecated PCI functions
PCI: Deprecate pcim_iounmap_regions()
PCI: Make pcim_iounmap_region() a public function
PCI: Remove pcim_iomap_regions_request_all()
ALSA: korg1212: Replace deprecated PCI functions
serial: rp2: Replace deprecated PCI functions
ntb: idt: Replace deprecated PCI functions
wifi: iwlwifi: replace deprecated PCI functions
intel_th: pci: Replace deprecated PCI functions
crypto: marvell - replace deprecated PCI functions
crypto: qat - replace deprecated PCI functions
ata: ahci: Replace deprecated PCI functions
PCI: Make pcim_request_all_regions() a public function
|
