| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull y2038 cleanups from Arnd Bergmann:
"y2038 syscall implementation cleanups
This is a series of cleanups for the y2038 work, mostly intended for
namespace cleaning: the kernel defines the traditional time_t, timeval
and timespec types that often lead to y2038-unsafe code. Even though
the unsafe usage is mostly gone from the kernel, having the types and
associated functions around means that we can still grow new users,
and that we may be missing conversions to safe types that actually
matter.
There are still a number of driver specific patches needed to get the
last users of these types removed, those have been submitted to the
respective maintainers"
Link: https://lore.kernel.org/lkml/20191108210236.1296047-1-arnd@arndb.de/
* tag 'y2038-cleanups-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (26 commits)
y2038: alarm: fix half-second cut-off
y2038: ipc: fix x32 ABI breakage
y2038: fix typo in powerpc vdso "LOPART"
y2038: allow disabling time32 system calls
y2038: itimer: change implementation to timespec64
y2038: move itimer reset into itimer.c
y2038: use compat_{get,set}_itimer on alpha
y2038: itimer: compat handling to itimer.c
y2038: time: avoid timespec usage in settimeofday()
y2038: timerfd: Use timespec64 internally
y2038: elfcore: Use __kernel_old_timeval for process times
y2038: make ns_to_compat_timeval use __kernel_old_timeval
y2038: socket: use __kernel_old_timespec instead of timespec
y2038: socket: remove timespec reference in timestamping
y2038: syscalls: change remaining timeval to __kernel_old_timeval
y2038: rusage: use __kernel_old_timeval
y2038: uapi: change __kernel_time_t to __kernel_old_time_t
y2038: stat: avoid 'time_t' in 'struct stat'
y2038: ipc: remove __kernel_time_t reference from headers
y2038: vdso: powerpc: avoid timespec references
...
|
|
The CONFIG_64BIT_TIME option is defined on all architectures, and can
be removed for simplicity now.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This type is used to pass the sigset_t from userland to the kernel,
but it was using the kernel native pointer type for the member
representing the compat userland pointer to the userland sigset_t.
This messes up the layout, and makes the kernel eat up both the
userland pointer and the size members into the kernel pointer, and
then reads garbage into the kernel sigsetsize. Which makes the sigset_t
size consistency check fail, and consequently the syscall always
returns -EINVAL.
This breaks both libaio and strace on 32-bit userland running on 64-bit
kernels. And there are apparently no users in the wild of the current
broken layout (at least according to codesearch.debian.org and a brief
check over github.com search). So it looks safe to fix this directly
in the kernel, instead of either letting userland deal with this
permanently with the additional overhead or trying to make the syscall
infer what layout userland used, even though this is also being worked
around in libaio to temporarily cope with kernels that have not yet
been fixed.
We use a proper compat_uptr_t instead of a compat_sigset_t pointer.
Fixes: 7a074e96dee6 ("aio: implement io_pgetevents")
Signed-off-by: Guillem Jover <guillem@hadrons.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs mount updates from Al Viro:
"The first part of mount updates.
Convert filesystems to use the new mount API"
* 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
mnt_init(): call shmem_init() unconditionally
constify ksys_mount() string arguments
don't bother with registering rootfs
init_rootfs(): don't bother with init_ramfs_fs()
vfs: Convert smackfs to use the new mount API
vfs: Convert selinuxfs to use the new mount API
vfs: Convert securityfs to use the new mount API
vfs: Convert apparmorfs to use the new mount API
vfs: Convert openpromfs to use the new mount API
vfs: Convert xenfs to use the new mount API
vfs: Convert gadgetfs to use the new mount API
vfs: Convert oprofilefs to use the new mount API
vfs: Convert ibmasmfs to use the new mount API
vfs: Convert qib_fs/ipathfs to use the new mount API
vfs: Convert efivarfs to use the new mount API
vfs: Convert configfs to use the new mount API
vfs: Convert binfmt_misc to use the new mount API
convenience helper: get_tree_single()
convenience helper get_tree_nodev()
vfs: Kill sget_userns()
...
|
|
migrate_page_move_mapping() doesn't use the mode argument. Remove it
and update callers accordingly.
Link: http://lkml.kernel.org/r/20190508210301.8472-1-keith.busch@intel.com
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
task->saved_sigmask and ->restore_sigmask are only used in the ret-from-
syscall paths. This means that set_user_sigmask() can save ->blocked in
->saved_sigmask and do set_restore_sigmask() to indicate that ->blocked
was modified.
This way the callers do not need 2 sigset_t's passed to set/restore and
restore_user_sigmask() renamed to restore_saved_sigmask_unless() turns
into the trivial helper which just calls restore_saved_sigmask().
Link: http://lkml.kernel.org/r/20190606113206.GA9464@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Eric Wong <e@80x24.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: David Laight <David.Laight@aculab.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull io_uring updates from Jens Axboe:
"This contains:
- Support for recvmsg/sendmsg as first class opcodes.
I don't envision going much further down this path, as there are
plans in progress to support potentially any system call in an
async fashion through io_uring. But I think it does make sense to
have certain core ops available directly, especially those that can
support a "try this non-blocking" flag/mode. (me)
- Handle generic short reads automatically.
This can happen fairly easily if parts of the buffered read is
cached. Since the application needs to issue another request for
the remainder, just do this internally and save kernel/user
roundtrip while providing a nicer more robust API. (me)
- Support for linked SQEs.
This allows SQEs to depend on each other, enabling an application
to eg queue a read-from-this-file,write-to-that-file pair. (me)
- Fix race in stopping SQ thread (Jackie)"
* tag 'for-5.3/io_uring-20190711' of git://git.kernel.dk/linux-block:
io_uring: fix io_sq_thread_stop running in front of io_sq_thread
io_uring: add support for recvmsg()
io_uring: add support for sendmsg()
io_uring: add support for sqe links
io_uring: punt short reads to async context
uio: make import_iovec()/compat_import_iovec() return bytes on success
|
|
This is the minimal fix for stable, I'll send cleanups later.
Commit 854a6ed56839 ("signal: Add restore_user_sigmask()") introduced
the visible change which breaks user-space: a signal temporary unblocked
by set_user_sigmask() can be delivered even if the caller returns
success or timeout.
Change restore_user_sigmask() to accept the additional "interrupted"
argument which should be used instead of signal_pending() check, and
update the callers.
Eric said:
: For clarity. I don't think this is required by posix, or fundamentally to
: remove the races in select. It is what linux has always done and we have
: applications who care so I agree this fix is needed.
:
: Further in any case where the semantic change that this patch rolls back
: (aka where allowing a signal to be delivered and the select like call to
: complete) would be advantage we can do as well if not better by using
: signalfd.
:
: Michael is there any chance we can get this guarantee of the linux
: implementation of pselect and friends clearly documented. The guarantee
: that if the system call completes successfully we are guaranteed that no
: signal that is unblocked by using sigmask will be delivered?
Link: http://lkml.kernel.org/r/20190604134117.GA29963@redhat.com
Fixes: 854a6ed56839a40f6b5d02a2962f48841482eec4 ("signal: Add restore_user_sigmask()")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Eric Wong <e@80x24.org>
Tested-by: Eric Wong <e@80x24.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: <stable@vger.kernel.org> [5.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently these functions return < 0 on error, and 0 for success.
Change that so that we return < 0 on error, but number of bytes
for success.
Some callers already treat the return value that way, others need a
slight tweak.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Convert the aio filesystem to the new internal mount API as the old
one will be obsoleted and removed. This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.
See Documentation/filesystems/mount_api.txt for more information.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Benjamin LaHaise <bcrl@kvack.org>
cc: linux-aio@kvack.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Once upon a time we used to set ->d_name of e.g. pipefs root
so that d_path() on pipes would work. These days it's
completely pointless - dentries of pipes are not even connected
to pipefs root. However, mount_pseudo() had set the root
dentry name (passed as the second argument) and callers
kept inventing names to pass to it. Including those that
didn't *have* any non-root dentries to start with...
All of that had been pointless for about 8 years now; it's
time to get rid of that cargo-culting...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
memory allocated by kmem_cache_alloc() should be freed using
kmem_cache_free(), not kfree().
Fixes: fa0ca2aee3be ("deal with get_reqs_available() in aio_get_req() itself")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This accidentally returns the wrong variable. The "req->ki_eventfd"
pointer is NULL so this return success.
Fixes: 7316b49c2a11 ("aio: move sanity checks and request allocation to io_submit_one()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
makes for somewhat cleaner control flow in __io_submit_one()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
simplifies the caller
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
no reason to duplicate that...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
that ssize_t is a rudiment of earlier calling conventions; it's been
used only to pass 0 and -E... since last autumn.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
aio_poll() has to cope with several unpleasant problems:
* requests that might stay around indefinitely need to
be made visible for io_cancel(2); that must not be done to
a request already completed, though.
* in cases when ->poll() has placed us on a waitqueue,
wakeup might have happened (and request completed) before ->poll()
returns.
* worse, in some early wakeup cases request might end
up re-added into the queue later - we can't treat "woken up and
currently not in the queue" as "it's not going to stick around
indefinitely"
* ... moreover, ->poll() might have decided not to
put it on any queues to start with, and that needs to be distinguished
from the previous case
* ->poll() might have tried to put us on more than one queue.
Only the first will succeed for aio poll, so we might end up missing
wakeups. OTOH, we might very well notice that only after the
wakeup hits and request gets completed (all before ->poll() gets
around to the second poll_wait()). In that case it's too late to
decide that we have an error.
req->woken was an attempt to deal with that. Unfortunately, it was
broken. What we need to keep track of is not that wakeup has happened -
the thing might come back after that. It's that async reference is
already gone and won't come back, so we can't (and needn't) put the
request on the list of cancellables.
The easiest case is "request hadn't been put on any waitqueues"; we
can tell by seeing NULL apt.head, and in that case there won't be
anything async. We should either complete the request ourselves
(if vfs_poll() reports anything of interest) or return an error.
In all other cases we get exclusion with wakeups by grabbing the
queue lock.
If request is currently on queue and we have something interesting
from vfs_poll(), we can steal it and complete the request ourselves.
If it's on queue and vfs_poll() has not reported anything interesting,
we either put it on the cancellable list, or, if we know that it
hadn't been put on all queues ->poll() wanted it on, we steal it and
return an error.
If it's _not_ on queue, it's either been already dealt with (in which
case we do nothing), or there's aio_poll_complete_work() about to be
executed. In that case we either put it on the cancellable list,
or, if we know it hadn't been put on all queues ->poll() wanted it on,
simulate what cancel would've done.
It's a lot more convoluted than I'd like it to be. Single-consumer APIs
suck, and unfortunately aio is not an exception...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Instead of having aio_complete() set ->ki_res.{res,res2}, do that
explicitly in its callers, drop the reference (as aio_complete()
used to do) and delay the rest until the final iocb_put().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
We want to separate forming the resulting io_event from putting it
into the ring buffer.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
aio_poll() is not the only case that needs file pinned; worse, while
aio_read()/aio_write() can live without pinning iocb itself, the
proof is rather brittle and can easily break on later changes.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull year 2038 updates from Thomas Gleixner:
"Another round of changes to make the kernel ready for 2038. After lots
of preparatory work this is the first set of syscalls which are 2038
safe:
403 clock_gettime64
404 clock_settime64
405 clock_adjtime64
406 clock_getres_time64
407 clock_nanosleep_time64
408 timer_gettime64
409 timer_settime64
410 timerfd_gettime64
411 timerfd_settime64
412 utimensat_time64
413 pselect6_time64
414 ppoll_time64
416 io_pgetevents_time64
417 recvmmsg_time64
418 mq_timedsend_time64
419 mq_timedreceiv_time64
420 semtimedop_time64
421 rt_sigtimedwait_time64
422 futex_time64
423 sched_rr_get_interval_time64
The syscall numbers are identical all over the architectures"
* 'timers-2038-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
riscv: Use latest system call ABI
checksyscalls: fix up mq_timedreceive and stat exceptions
unicore32: Fix __ARCH_WANT_STAT64 definition
asm-generic: Make time32 syscall numbers optional
asm-generic: Drop getrlimit and setrlimit syscalls from default list
32-bit userspace ABI: introduce ARCH_32BIT_OFF_T config option
compat ABI: use non-compat openat and open_by_handle_at variants
y2038: add 64-bit time_t syscalls to all 32-bit architectures
y2038: rename old time and utime syscalls
y2038: remove struct definition redirects
y2038: use time32 syscall names on 32-bit
syscalls: remove obsolete __IGNORE_ macros
y2038: syscalls: rename y2038 compat syscalls
x86/x32: use time64 versions of sigtimedwait and recvmmsg
timex: change syscalls to use struct __kernel_timex
timex: use __kernel_timex internally
sparc64: add custom adjtimex/clock_adjtime functions
time: fix sys_timer_settime prototype
time: Add struct __kernel_timex
time: make adjtime compat handling available for 32 bit
...
|
|
Pull vfs fixes from Al Viro:
"Assorted fixes that sat in -next for a while, all over the place"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
aio: Fix locking in aio_poll()
exec: Fix mem leak in kernel_read_file
copy_mount_string: Limit string length to PATH_MAX
cgroup: saner refcounting for cgroup_root
fix cgroup_do_mount() handling of failure exits
|
|
Al Viro root-caused a race where the IOCB_CMD_POLL handling of
fget/fput() could cause us to access the file pointer after it had
already been freed:
"In more details - normally IOCB_CMD_POLL handling looks so:
1) io_submit(2) allocates aio_kiocb instance and passes it to
aio_poll()
2) aio_poll() resolves the descriptor to struct file by req->file =
fget(iocb->aio_fildes)
3) aio_poll() sets ->woken to false and raises ->ki_refcnt of that
aio_kiocb to 2 (bumps by 1, that is).
4) aio_poll() calls vfs_poll(). After sanity checks (basically,
"poll_wait() had been called and only once") it locks the queue.
That's what the extra reference to iocb had been for - we know we
can safely access it.
5) With queue locked, we check if ->woken has already been set to
true (by aio_poll_wake()) and, if it had been, we unlock the
queue, drop a reference to aio_kiocb and bugger off - at that
point it's a responsibility to aio_poll_wake() and the stuff
called/scheduled by it. That code will drop the reference to file
in req->file, along with the other reference to our aio_kiocb.
6) otherwise, we see whether we need to wait. If we do, we unlock the
queue, drop one reference to aio_kiocb and go away - eventual
wakeup (or cancel) will deal with the reference to file and with
the other reference to aio_kiocb
7) otherwise we remove ourselves from waitqueue (still under the
queue lock), so that wakeup won't get us. No async activity will
be happening, so we can safely drop req->file and iocb ourselves.
If wakeup happens while we are in vfs_poll(), we are fine - aio_kiocb
won't get freed under us, so we can do all the checks and locking
safely. And we don't touch ->file if we detect that case.
However, vfs_poll() most certainly *does* touch the file it had been
given. So wakeup coming while we are still in ->poll() might end up
doing fput() on that file. That case is not too rare, and usually we
are saved by the still present reference from descriptor table - that
fput() is not the final one.
But if another thread closes that descriptor right after our fget()
and wakeup does happen before ->poll() returns, we are in trouble -
final fput() done while we are in the middle of a method:
Al also wrote a patch to take an extra reference to the file descriptor
to fix this, but I instead suggested we just streamline the whole file
pointer handling by submit_io() so that the generic aio submission code
simply keeps the file pointer around until the aio has completed.
Fixes: bfe4037e722e ("aio: implement IOCB_CMD_POLL")
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: syzbot+503d4cc169fcec1cb18c@syzkaller.appspotmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
wake_up_locked() may but does not have to be called with interrupts
disabled. Since the fuse filesystem calls wake_up_locked() without
disabling interrupts aio_poll_wake() may be called with interrupts
enabled. Since the kioctx.ctx_lock may be acquired from IRQ context,
all code that acquires that lock from thread context must disable
interrupts. Hence change the spin_trylock() call in aio_poll_wake()
into a spin_trylock_irqsave() call. This patch fixes the following
lockdep complaint:
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
5.0.0-rc4-next-20190131 #23 Not tainted
-----------------------------------------------------
syz-executor2/13779 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
0000000098ac1230 (&fiq->waitq){+.+.}, at: spin_lock include/linux/spinlock.h:329 [inline]
0000000098ac1230 (&fiq->waitq){+.+.}, at: aio_poll fs/aio.c:1772 [inline]
0000000098ac1230 (&fiq->waitq){+.+.}, at: __io_submit_one fs/aio.c:1875 [inline]
0000000098ac1230 (&fiq->waitq){+.+.}, at: io_submit_one+0xedf/0x1cf0 fs/aio.c:1908
and this task is already holding:
000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: spin_lock_irq include/linux/spinlock.h:354 [inline]
000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: aio_poll fs/aio.c:1771 [inline]
000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: __io_submit_one fs/aio.c:1875 [inline]
000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: io_submit_one+0xeb6/0x1cf0 fs/aio.c:1908
which would create a new lock dependency:
(&(&ctx->ctx_lock)->rlock){..-.} -> (&fiq->waitq){+.+.}
but this new dependency connects a SOFTIRQ-irq-safe lock:
(&(&ctx->ctx_lock)->rlock){..-.}
... which became SOFTIRQ-irq-safe at:
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
__raw_spin_lock_irq include/linux/spinlock_api_smp.h:128 [inline]
_raw_spin_lock_irq+0x60/0x80 kernel/locking/spinlock.c:160
spin_lock_irq include/linux/spinlock.h:354 [inline]
free_ioctx_users+0x2d/0x4a0 fs/aio.c:610
percpu_ref_put_many include/linux/percpu-refcount.h:285 [inline]
percpu_ref_put include/linux/percpu-refcount.h:301 [inline]
percpu_ref_call_confirm_rcu lib/percpu-refcount.c:123 [inline]
percpu_ref_switch_to_atomic_rcu+0x3e7/0x520 lib/percpu-refcount.c:158
__rcu_reclaim kernel/rcu/rcu.h:240 [inline]
rcu_do_batch kernel/rcu/tree.c:2486 [inline]
invoke_rcu_callbacks kernel/rcu/tree.c:2799 [inline]
rcu_core+0x928/0x1390 kernel/rcu/tree.c:2780
__do_softirq+0x266/0x95a kernel/softirq.c:292
run_ksoftirqd kernel/softirq.c:654 [inline]
run_ksoftirqd+0x8e/0x110 kernel/softirq.c:646
smpboot_thread_fn+0x6ab/0xa10 kernel/smpboot.c:164
kthread+0x357/0x430 kernel/kthread.c:247
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
to a SOFTIRQ-irq-unsafe lock:
(&fiq->waitq){+.+.}
... which became SOFTIRQ-irq-unsafe at:
...
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144
spin_lock include/linux/spinlock.h:329 [inline]
flush_bg_queue+0x1f3/0x3c0 fs/fuse/dev.c:415
fuse_request_queue_background+0x2d1/0x580 fs/fuse/dev.c:676
fuse_request_send_background+0x58/0x120 fs/fuse/dev.c:687
fuse_send_init fs/fuse/inode.c:989 [inline]
fuse_fill_super+0x13bb/0x1730 fs/fuse/inode.c:1214
mount_nodev+0x68/0x110 fs/super.c:1392
fuse_mount+0x2d/0x40 fs/fuse/inode.c:1239
legacy_get_tree+0xf2/0x200 fs/fs_context.c:590
vfs_get_tree+0x123/0x450 fs/super.c:1481
do_new_mount fs/namespace.c:2610 [inline]
do_mount+0x1436/0x2c40 fs/namespace.c:2932
ksys_mount+0xdb/0x150 fs/namespace.c:3148
__do_sys_mount fs/namespace.c:3162 [inline]
__se_sys_mount fs/namespace.c:3159 [inline]
__x64_sys_mount+0xbe/0x150 fs/namespace.c:3159
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&fiq->waitq);
local_irq_disable();
lock(&(&ctx->ctx_lock)->rlock);
lock(&fiq->waitq);
<Interrupt>
lock(&(&ctx->ctx_lock)->rlock);
*** DEADLOCK ***
1 lock held by syz-executor2/13779:
#0: 000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: spin_lock_irq include/linux/spinlock.h:354 [inline]
#0: 000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: aio_poll fs/aio.c:1771 [inline]
#0: 000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: __io_submit_one fs/aio.c:1875 [inline]
#0: 000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: io_submit_one+0xeb6/0x1cf0 fs/aio.c:1908
the dependencies between SOFTIRQ-irq-safe lock and the holding lock:
-> (&(&ctx->ctx_lock)->rlock){..-.} {
IN-SOFTIRQ-W at:
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
__raw_spin_lock_irq include/linux/spinlock_api_smp.h:128 [inline]
_raw_spin_lock_irq+0x60/0x80 kernel/locking/spinlock.c:160
spin_lock_irq include/linux/spinlock.h:354 [inline]
free_ioctx_users+0x2d/0x4a0 fs/aio.c:610
percpu_ref_put_many include/linux/percpu-refcount.h:285 [inline]
percpu_ref_put include/linux/percpu-refcount.h:301 [inline]
percpu_ref_call_confirm_rcu lib/percpu-refcount.c:123 [inline]
percpu_ref_switch_to_atomic_rcu+0x3e7/0x520 lib/percpu-refcount.c:158
__rcu_reclaim kernel/rcu/rcu.h:240 [inline]
rcu_do_batch kernel/rcu/tree.c:2486 [inline]
invoke_rcu_callbacks kernel/rcu/tree.c:2799 [inline]
rcu_core+0x928/0x1390 kernel/rcu/tree.c:2780
__do_softirq+0x266/0x95a kernel/softirq.c:292
run_ksoftirqd kernel/softirq.c:654 [inline]
run_ksoftirqd+0x8e/0x110 kernel/softirq.c:646
smpboot_thread_fn+0x6ab/0xa10 kernel/smpboot.c:164
kthread+0x357/0x430 kernel/kthread.c:247
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
INITIAL USE at:
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
__raw_spin_lock_irq include/linux/spinlock_api_smp.h:128 [inline]
_raw_spin_lock_irq+0x60/0x80 kernel/locking/spinlock.c:160
spin_lock_irq include/linux/spinlock.h:354 [inline]
__do_sys_io_cancel fs/aio.c:2052 [inline]
__se_sys_io_cancel fs/aio.c:2035 [inline]
__x64_sys_io_cancel+0xd5/0x5a0 fs/aio.c:2035
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
}
... key at: [<ffffffff8a574140>] __key.52370+0x0/0x40
... acquired at:
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144
spin_lock include/linux/spinlock.h:329 [inline]
aio_poll fs/aio.c:1772 [inline]
__io_submit_one fs/aio.c:1875 [inline]
io_submit_one+0xedf/0x1cf0 fs/aio.c:1908
__do_sys_io_submit fs/aio.c:1953 [inline]
__se_sys_io_submit fs/aio.c:1923 [inline]
__x64_sys_io_submit+0x1bd/0x580 fs/aio.c:1923
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
the dependencies between the lock to be acquired
and SOFTIRQ-irq-unsafe lock:
-> (&fiq->waitq){+.+.} {
HARDIRQ-ON-W at:
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144
spin_lock include/linux/spinlock.h:329 [inline]
flush_bg_queue+0x1f3/0x3c0 fs/fuse/dev.c:415
fuse_request_queue_background+0x2d1/0x580 fs/fuse/dev.c:676
fuse_request_send_background+0x58/0x120 fs/fuse/dev.c:687
fuse_send_init fs/fuse/inode.c:989 [inline]
fuse_fill_super+0x13bb/0x1730 fs/fuse/inode.c:1214
mount_nodev+0x68/0x110 fs/super.c:1392
fuse_mount+0x2d/0x40 fs/fuse/inode.c:1239
legacy_get_tree+0xf2/0x200 fs/fs_context.c:590
vfs_get_tree+0x123/0x450 fs/super.c:1481
do_new_mount fs/namespace.c:2610 [inline]
do_mount+0x1436/0x2c40 fs/namespace.c:2932
ksys_mount+0xdb/0x150 fs/namespace.c:3148
__do_sys_mount fs/namespace.c:3162 [inline]
__se_sys_mount fs/namespace.c:3159 [inline]
__x64_sys_mount+0xbe/0x150 fs/namespace.c:3159
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
SOFTIRQ-ON-W at:
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144
spin_lock include/linux/spinlock.h:329 [inline]
flush_bg_queue+0x1f3/0x3c0 fs/fuse/dev.c:415
fuse_request_queue_background+0x2d1/0x580 fs/fuse/dev.c:676
fuse_request_send_background+0x58/0x120 fs/fuse/dev.c:687
fuse_send_init fs/fuse/inode.c:989 [inline]
fuse_fill_super+0x13bb/0x1730 fs/fuse/inode.c:1214
mount_nodev+0x68/0x110 fs/super.c:1392
fuse_mount+0x2d/0x40 fs/fuse/inode.c:1239
legacy_get_tree+0xf2/0x200 fs/fs_context.c:590
vfs_get_tree+0x123/0x450 fs/super.c:1481
do_new_mount fs/namespace.c:2610 [inline]
do_mount+0x1436/0x2c40 fs/namespace.c:2932
ksys_mount+0xdb/0x150 fs/namespace.c:3148
__do_sys_mount fs/namespace.c:3162 [inline]
__se_sys_mount fs/namespace.c:3159 [inline]
__x64_sys_mount+0xbe/0x150 fs/namespace.c:3159
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
INITIAL USE at:
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144
spin_lock include/linux/spinlock.h:329 [inline]
flush_bg_queue+0x1f3/0x3c0 fs/fuse/dev.c:415
fuse_request_queue_background+0x2d1/0x580 fs/fuse/dev.c:676
fuse_request_send_background+0x58/0x120 fs/fuse/dev.c:687
fuse_send_init fs/fuse/inode.c:989 [inline]
fuse_fill_super+0x13bb/0x1730 fs/fuse/inode.c:1214
mount_nodev+0x68/0x110 fs/super.c:1392
fuse_mount+0x2d/0x40 fs/fuse/inode.c:1239
legacy_get_tree+0xf2/0x200 fs/fs_context.c:590
vfs_get_tree+0x123/0x450 fs/super.c:1481
do_new_mount fs/namespace.c:2610 [inline]
do_mount+0x1436/0x2c40 fs/namespace.c:2932
ksys_mount+0xdb/0x150 fs/namespace.c:3148
__do_sys_mount fs/namespace.c:3162 [inline]
__se_sys_mount fs/namespace.c:3159 [inline]
__x64_sys_mount+0xbe/0x150 fs/namespace.c:3159
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
}
... key at: [<ffffffff8a60dec0>] __key.43450+0x0/0x40
... acquired at:
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144
spin_lock include/linux/spinlock.h:329 [inline]
aio_poll fs/aio.c:1772 [inline]
__io_submit_one fs/aio.c:1875 [inline]
io_submit_one+0xedf/0x1cf0 fs/aio.c:1908
__do_sys_io_submit fs/aio.c:1953 [inline]
__se_sys_io_submit fs/aio.c:1923 [inline]
__x64_sys_io_submit+0x1bd/0x580 fs/aio.c:1923
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
stack backtrace:
CPU: 0 PID: 13779 Comm: syz-executor2 Not tainted 5.0.0-rc4-next-20190131 #23
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
print_bad_irq_dependency kernel/locking/lockdep.c:1573 [inline]
check_usage.cold+0x60f/0x940 kernel/locking/lockdep.c:1605
check_irq_usage kernel/locking/lockdep.c:1650 [inline]
check_prev_add_irq kernel/locking/lockdep_states.h:8 [inline]
check_prev_add kernel/locking/lockdep.c:1860 [inline]
check_prevs_add kernel/locking/lockdep.c:1968 [inline]
validate_chain kernel/locking/lockdep.c:2339 [inline]
__lock_acquire+0x1f12/0x4790 kernel/locking/lockdep.c:3320
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144
spin_lock include/linux/spinlock.h:329 [inline]
aio_poll fs/aio.c:1772 [inline]
__io_submit_one fs/aio.c:1875 [inline]
io_submit_one+0xedf/0x1cf0 fs/aio.c:1908
__do_sys_io_submit fs/aio.c:1953 [inline]
__se_sys_io_submit fs/aio.c:1923 [inline]
__x64_sys_io_submit+0x1bd/0x580 fs/aio.c:1923
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Avi Kivity <avi@scylladb.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@vger.kernel.org>
Fixes: e8693bcfa0b4 ("aio: allow direct aio poll comletions for keyed wakeups") # v4.19
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
[ bvanassche: added a comment ]
Reluctantly-Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
A lot of system calls that pass a time_t somewhere have an implementation
using a COMPAT_SYSCALL_DEFINEx() on 64-bit architectures, and have
been reworked so that this implementation can now be used on 32-bit
architectures as well.
The missing step is to redefine them using the regular SYSCALL_DEFINEx()
to get them out of the compat namespace and make it possible to build them
on 32-bit architectures.
Any system call that ends in 'time' gets a '32' suffix on its name for
that version, while the others get a '_time32' suffix, to distinguish
them from the normal version, which takes a 64-bit time argument in the
future.
In this step, only 64-bit architectures are changed, doing this rename
first lets us avoid touching the 32-bit architectures twice.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
A recent optimization had left private uninitialized.
Fixes: 2bc4ca9bb600 ("aio: don't zero entire aio_kiocb aio_get_req()")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Merge misc updates from Andrew Morton:
- large KASAN update to use arm's "software tag-based mode"
- a few misc things
- sh updates
- ocfs2 updates
- just about all of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (167 commits)
kernel/fork.c: mark 'stack_vm_area' with __maybe_unused
memcg, oom: notify on oom killer invocation from the charge path
mm, swap: fix swapoff with KSM pages
include/linux/gfp.h: fix typo
mm/hmm: fix memremap.h, move dev_page_fault_t callback to hmm
hugetlbfs: Use i_mmap_rwsem to fix page fault/truncate race
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
memory_hotplug: add missing newlines to debugging output
mm: remove __hugepage_set_anon_rmap()
include/linux/vmstat.h: remove unused page state adjustment macro
mm/page_alloc.c: allow error injection
mm: migrate: drop unused argument of migrate_page_move_mapping()
blkdev: avoid migration stalls for blkdev pages
mm: migrate: provide buffer_migrate_page_norefs()
mm: migrate: move migrate_page_lock_buffers()
mm: migrate: lock buffers before migrate_page_move_mapping()
mm: migration: factor out code to compute expected number of page references
mm, page_alloc: enable pcpu_drain with zone capability
kmemleak: add config to select auto scan
mm/page_alloc.c: don't call kasan_free_pages() at deferred mem init
...
|
|
Pull aio updates from Jens Axboe:
"Flushing out pre-patches for the buffered/polled aio series. Some
fixes in here, but also optimizations"
* tag 'for-4.21/aio-20181221' of git://git.kernel.dk/linux-block:
aio: abstract out io_event filler helper
aio: split out iocb copy from io_submit_one()
aio: use iocb_put() instead of open coding it
aio: only use blk plugs for > 2 depth submissions
aio: don't zero entire aio_kiocb aio_get_req()
aio: separate out ring reservation from req allocation
aio: use assigned completion handler
|
|
Pull block updates from Jens Axboe:
"This is the main pull request for block/storage for 4.21.
Larger than usual, it was a busy round with lots of goodies queued up.
Most notable is the removal of the old IO stack, which has been a long
time coming. No new features for a while, everything coming in this
week has all been fixes for things that were previously merged.
This contains:
- Use atomic counters instead of semaphores for mtip32xx (Arnd)
- Cleanup of the mtip32xx request setup (Christoph)
- Fix for circular locking dependency in loop (Jan, Tetsuo)
- bcache (Coly, Guoju, Shenghui)
* Optimizations for writeback caching
* Various fixes and improvements
- nvme (Chaitanya, Christoph, Sagi, Jay, me, Keith)
* host and target support for NVMe over TCP
* Error log page support
* Support for separate read/write/poll queues
* Much improved polling
* discard OOM fallback
* Tracepoint improvements
- lightnvm (Hans, Hua, Igor, Matias, Javier)
* Igor added packed metadata to pblk. Now drives without metadata
per LBA can be used as well.
* Fix from Geert on uninitialized value on chunk metadata reads.
* Fixes from Hans and Javier to pblk recovery and write path.
* Fix from Hua Su to fix a race condition in the pblk recovery
code.
* Scan optimization added to pblk recovery from Zhoujie.
* Small geometry cleanup from me.
- Conversion of the last few drivers that used the legacy path to
blk-mq (me)
- Removal of legacy IO path in SCSI (me, Christoph)
- Removal of legacy IO stack and schedulers (me)
- Support for much better polling, now without interrupts at all.
blk-mq adds support for multiple queue maps, which enables us to
have a map per type. This in turn enables nvme to have separate
completion queues for polling, which can then be interrupt-less.
Also means we're ready for async polled IO, which is hopefully
coming in the next release.
- Killing of (now) unused block exports (Christoph)
- Unification of the blk-rq-qos and blk-wbt wait handling (Josef)
- Support for zoned testing with null_blk (Masato)
- sx8 conversion to per-host tag sets (Christoph)
- IO priority improvements (Damien)
- mq-deadline zoned fix (Damien)
- Ref count blkcg series (Dennis)
- Lots of blk-mq improvements and speedups (me)
- sbitmap scalability improvements (me)
- Make core inflight IO accounting per-cpu (Mikulas)
- Export timeout setting in sysfs (Weiping)
- Cleanup the direct issue path (Jianchao)
- Export blk-wbt internals in block debugfs for easier debugging
(Ming)
- Lots of other fixes and improvements"
* tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-block: (364 commits)
kyber: use sbitmap add_wait_queue/list_del wait helpers
sbitmap: add helpers for add/del wait queue handling
block: save irq state in blkg_lookup_create()
dm: don't reuse bio for flushes
nvme-pci: trace SQ status on completions
nvme-rdma: implement polling queue map
nvme-fabrics: allow user to pass in nr_poll_queues
nvme-fabrics: allow nvmf_connect_io_queue to poll
nvme-core: optionally poll sync commands
block: make request_to_qc_t public
nvme-tcp: fix spelling mistake "attepmpt" -> "attempt"
nvme-tcp: fix endianess annotations
nvmet-tcp: fix endianess annotations
nvme-pci: refactor nvme_poll_irqdisable to make sparse happy
nvme-pci: only set nr_maps to 2 if poll queues are supported
nvmet: use a macro for default error location
nvmet: fix comparison of a u16 with -1
blk-mq: enable IO poll if .nr_queues of type poll > 0
blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight()
blk-mq: skip zero-queue maps in blk_mq_map_swqueue
...
|
|
ssh://gitolite.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull y2038 updates from Arnd Bergmann:
"More syscalls and cleanups
This concludes the main part of the system call rework for 64-bit
time_t, which has spread over most of year 2018, the last six system
calls being
- ppoll
- pselect6
- io_pgetevents
- recvmmsg
- futex
- rt_sigtimedwait
As before, nothing changes for 64-bit architectures, while 32-bit
architectures gain another entry point that differs only in the layout
of the timespec structure. Hopefully in the next release we can wire
up all 22 of those system calls on all 32-bit architectures, which
gives us a baseline version for glibc to start using them.
This does not include the clock_adjtime, getrusage/waitid, and
getitimer/setitimer system calls. I still plan to have new versions of
those as well, but they are not required for correct operation of the
C library since they can be emulated using the old 32-bit time_t based
system calls.
Aside from the system calls, there are also a few cleanups here,
removing old kernel internal interfaces that have become unused after
all references got removed. The arch/sh cleanups are part of this,
there were posted several times over the past year without a reaction
from the maintainers, while the corresponding changes made it into all
other architectures"
* tag 'y2038-for-4.21' of ssh://gitolite.kernel.org:/pub/scm/linux/kernel/git/arnd/playground:
timekeeping: remove obsolete time accessors
vfs: replace current_kernel_time64 with ktime equivalent
timekeeping: remove timespec_add/timespec_del
timekeeping: remove unused {read,update}_persistent_clock
sh: remove board_time_init() callback
sh: remove unused rtc_sh_get/set_time infrastructure
sh: sh03: rtc: push down rtc class ops into driver
sh: dreamcast: rtc: push down rtc class ops into driver
y2038: signal: Add compat_sys_rt_sigtimedwait_time64
y2038: signal: Add sys_rt_sigtimedwait_time32
y2038: socket: Add compat_sys_recvmmsg_time64
y2038: futex: Add support for __kernel_timespec
y2038: futex: Move compat implementation into futex.c
io_pgetevents: use __kernel_timespec
pselect6: use __kernel_timespec
ppoll: use __kernel_timespec
signal: Add restore_user_sigmask()
signal: Add set_user_sigmask()
|
|
All callers of migrate_page_move_mapping() now pass NULL for 'head'
argument. Drop it.
Link: http://lkml.kernel.org/r/20181211172143.7358-7-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation of handing in iocbs in a different fashion as well. Also
make it clear that the iocb being passed in isn't modified, by marking
it const throughout.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace the percpu_ref_put() + kmem_cache_free() with a call to
iocb_put() instead.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Plugging is meant to optimize submission of a string of IOs, if we don't
have more than 2 being submitted, don't bother setting up a plug.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's 192 bytes, fairly substantial. Most items don't need to be cleared,
especially not upfront. Clear the ones we do need to clear, and leave
the other ones for setup when the iocb is prepared and submitted.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is in preparation for certain types of IO not needing a ring
reserveration.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We know this is a read/write request, but in preparation for
having different kinds of those, ensure that we call the assigned
handler instead of assuming it's aio_complete_rq().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
* for-4.21/block: (351 commits)
blk-mq: enable IO poll if .nr_queues of type poll > 0
blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight()
blk-mq: skip zero-queue maps in blk_mq_map_swqueue
block: fix blk-iolatency accounting underflow
blk-mq: fix dispatch from sw queue
block: mq-deadline: Fix write completion handling
nvme-pci: don't share queue maps
blk-mq: only dispatch to non-defauly queue maps if they have queues
blk-mq: export hctx->type in debugfs instead of sysfs
blk-mq: fix allocation for queue mapping table
blk-wbt: export internal state via debugfs
blk-mq-debugfs: support rq_qos
block: update sysfs documentation
block: loop: check error using IS_ERR instead of IS_ERR_OR_NULL in loop_add()
aoe: add __exit annotation
block: clear REQ_HIPRI if polling is not supported
blk-mq: replace and kill blk_mq_request_issue_directly
blk-mq: issue directly with bypass 'false' in blk_mq_sched_insert_requests
blk-mq: refactor the code of issue request directly
block: remove the bio_integrity_advance export
...
|
|
Pull block fixes from Jens Axboe:
"Three small fixes for this week. contains:
- spectre indexing fix for aio (Jeff)
- fix for the previous zeroing bio fix, we don't need it for user
mapped pages, and in fact it breaks some applications if we do
(Keith)
- allocation failure fix for null_blk with zoned (Shin'ichiro)"
* tag 'for-linus-20181214' of git://git.kernel.dk/linux-block:
block: Fix null_blk_zoned creation failure with small number of zones
aio: fix spectre gadget in lookup_ioctx
block/bio: Do not zero user pages
|
|
Matthew pointed out that the ioctx_table is susceptible to spectre v1,
because the index can be controlled by an attacker. The below patch
should mitigate the attack for all of the aio system calls.
Cc: stable@vger.kernel.org
Reported-by: Matthew Wilcox <willy@infradead.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
struct timespec is not y2038 safe.
struct __kernel_timespec is the new y2038 safe structure for all
syscalls that are using struct timespec.
Update io_pgetevents interfaces to use struct __kernel_timespec.
sigset_t also has different representations on 32 bit and 64 bit
architectures. Hence, we need to support the following different
syscalls:
New y2038 safe syscalls:
(Controlled by CONFIG_64BIT_TIME for 32 bit ABIs)
Native 64 bit(unchanged) and native 32 bit : sys_io_pgetevents
Compat : compat_sys_io_pgetevents_time64
Older y2038 unsafe syscalls:
(Controlled by CONFIG_32BIT_COMPAT_TIME for 32 bit ABIs)
Native 32 bit : sys_io_pgetevents_time32
Compat : compat_sys_io_pgetevents
Note that io_getevents syscalls do not have a y2038 safe solution.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Refactor the logic to restore the sigmask before the syscall
returns into an api.
This is useful for versions of syscalls that pass in the
sigmask and expect the current->sigmask to be changed during
the execution and restored after the execution of the syscall.
With the advent of new y2038 syscalls in the subsequent patches,
we add two more new versions of the syscalls (for pselect, ppoll
and io_pgetevents) in addition to the existing native and compat
versions. Adding such an api reduces the logic that would need to
be replicated otherwise.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Refactor reading sigset from userspace and updating sigmask
into an api.
This is useful for versions of syscalls that pass in the
sigmask and expect the current->sigmask to be changed during,
and restored after, the execution of the syscall.
With the advent of new y2038 syscalls in the subsequent patches,
we add two more new versions of the syscalls (for pselect, ppoll,
and io_pgetevents) in addition to the existing native and compat
versions. Adding such an api reduces the logic that would need to
be replicated otherwise.
Note that the calls to sigprocmask() ignored the return value
from the api as the function only returns an error on an invalid
first argument that is hardcoded at these call sites.
The updated logic uses set_current_blocked() instead.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
No one is going to poll for aio (yet), so we must clear the HIPRI
flag, as we would otherwise send it down the poll queues, where no
one will be polling for completions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
IOCB_HIPRI, not RWF_HIPRI.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull in v4.20-rc5, solving a conflict we'll otherwise get in aio.c and
also getting the merge fix that went into mainline that users are
hitting testing for-4.21/block and/or for-next.
* tag 'v4.20-rc5': (664 commits)
Linux 4.20-rc5
PCI: Fix incorrect value returned from pcie_get_speed_cap()
MAINTAINERS: Update linux-mips mailing list address
ocfs2: fix potential use after free
mm/khugepaged: fix the xas_create_range() error path
mm/khugepaged: collapse_shmem() do not crash on Compound
mm/khugepaged: collapse_shmem() without freezing new_page
mm/khugepaged: minor reorderings in collapse_shmem()
mm/khugepaged: collapse_shmem() remember to clear holes
mm/khugepaged: fix crashes due to misaccounted holes
mm/khugepaged: collapse_shmem() stop if punched or truncated
mm/huge_memory: fix lockdep complaint on 32-bit i_size_read()
mm/huge_memory: splitting set mapping+index before unfreeze
mm/huge_memory: rename freeze_page() to unmap_page()
initramfs: clean old path before creating a hardlink
kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace
psi: make disabling/enabling easier for vendor kernels
proc: fixup map_files test on arm
debugobjects: avoid recursive calls with kmemleak
userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set
...
|
|
For cases when the application does not specify aio_reqprio for an aio,
fallback to use get_current_ioprio() to obtain the task I/O priority
last set using ioprio_set() rather than the hardcoded IOPRIO_CLASS_NONE
value.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Adam Manzanares <adam.manzanares@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If the ioprio capability check fails, we return without putting
the file pointer.
Fixes: d9a08a9e616b ("fs: Add aio iopriority support")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
