| Age | Commit message (Collapse) | Author |
|---|
|
New helper for new rebalance code
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_quota_read(), when scanning for inodes, may attempt to look up
inodes that have been deleted in the main subvolume - this is not an
error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a new bitset btree for inodes pending deletion; this means we no
longer have to scan the full inodes btree after an unclean shutdown.
Specifically, this adds:
- a trigger to update the deleted_inodes btree based on changes to the
inodes btree
- a new recovery pass
- and check_inodes is now only a fsck pass.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Prep work for the new deleted inodes btree
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bit of reorg
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
As part of the forward compatibility patch series, we need to allow for
new key types without complaining loudly when running an old version.
This patch changes the flags parameter of bkey_invalid to an enum, and
adds a new flag to indicate we're being called from the transaction
commit path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds a new field to bkey_ops for the minimum size of the value,
which standardizes that check and also enforces the new rule (previously
done somewhat ad-hoc) that we can extend value types by adding new
fields on to the end.
To make that work we do _not_ initialize min_val_size with sizeof,
instead we initialize it to the size of the first version of those
values.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Move bi_size and bi_sectors into the non-varint portion of the inode, so
that the write path can update them without going through the relatively
expensive unpack/pack operations.
Other changes:
- Add a field for the offset of the varint section, so we can add new
non-varint fields without needing a new inode type, like alloc_v3
- Move bi_mode into the flags field, so that the varint section can be
u64 aligned
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This improves io_opts() and makes it a non-inline function - it's big
enough that it probably shouldn't be.
Also, bch_io_opts no longer needs fields for whether options are
defined, so we can slim it down a bit.
We'd like to stop passing around the full bch_io_opts, but that'll be
tricky because of bch2_rebalance_add_key().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
It turns out the *_defined entries of bch_io_opts are only used in one
place - in the xattr get path - and there we immediately convert to a
bch_opts struct, which also has the *_defined entries.
This patch changes bch2_inode_opts_to_opts() to go directly from
bch_inode_unpacked to bch_opts, which is a minor simplification and will
also let us slim down struct bch_io_opts in another patch.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fixes for various checkpatch errors.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Long ago, bkey_unpack_key() was added to bset.h instead of bkey.h
because bkey.h didn't include btree_types.h, which it needs for the
compiled unpack function.
This patch finally moves it to the proper location.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This switches that assertion to a bch2_trans_inconsistent() call, as it
should be.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This adds a new parameter to .key_invalid() methods for whether the key
is being read or written; the idea being that methods can do more
aggressive checks when a key is newly created and being written, when we
wouldn't want to delete the key because of those checks.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This replaces the switch statements in bch2_mark_key(),
bch2_trans_mark_key() with new bkey methods - prep work for the next
patch, which fixes BTREE_TRIGGER_WANTS_OLD_AND_NEW.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
Add a new helper that returns true if the given btree ID uses the btree
key cache. This enables some new cleanups, since the helper can check
the options for whether caching is enabled on a given btree.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This adds a new assertion to be used by bch2_inode_update_after_write(),
which updates the VFS inode based on the update to the btree inode we
just did - we require that the btree inode still be locked when we do
that update.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
Add fields to inode & alloc keys that record the journal sequence number
when they were most recently modified.
For alloc keys, this is needed to know what journal sequence number we
have to flush before the bucket can be reused. Currently this is tracked
in memory, but we'll be getting rid of the in memory bucket array.
For inodes, this is needed for fsync when the inode has been evicted
from the vfs cache. Currently we use a bloom filter per outstanding
journal buf - but that mechanism has been broken since we added the
ability to not issue a flush/fua for every journal write.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
The fsck code has been handling transaction restarts locally, to avoid
calling fsck_err() multiple times (and asking the user/logging the error
multiple times) on transaction restart.
However, with our improving assertions about iterator validity, this
isn't working anymore - the code wasn't entirely correct, in ways that
are fine for now but are going to matter once we start wanting online
fsck.
This code converts much of the fsck code to handle transaction restarts
in a more rigorously correct way - moving restart handling up to the top
level of check_dirent, check_xattr and others - at the cost of logging
errors multiple times on transaction restart.
Fixing the issues with logging errors multiple times is probably going
to require memoizing calls to fsck_err() - we'll leave that for future
improvements.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
To implement snapshots, we need every filesystem btree operation (every
btree operation without a subvolume) to start by looking up the
subvolume and getting the current snapshot ID, with
bch2_subvolume_get_snapshot() - then, that snapshot ID is used for doing
btree lookups in BTREE_ITER_FILTER_SNAPSHOTS mode.
This patch adds those bch2_subvolume_get_snapshot() calls, and also
switches to passing around a subvol_inum instead of just an inode
number.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This splits btree_iter into two components: btree_iter is now the
externally visible componont, and it points to a btree_path which is now
reference counted.
This means we no longer have to clone iterators up front if they might
be mutated - btree_path can be shared by multiple iterators, and cloned
if an iterator would mutate a shared btree_path. This will help us use
iterators more efficiently, as well as slimming down the main long lived
state in btree_trans, and significantly cleans up the logic for iterator
lifetimes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
If the transactior restarts on a different CPU, it could end up needing
to read in a different btree node, which makes another transaction
restart more likely...
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
Now that we have inode backpointers, we can simplify checking directory
structure: instead of doing a DFS from the filesystem root and then
checking if we found everything, we can iterate over every inode and see
if we can go up until we get to the root.
This patch also has a number of fixes and simplifications for the inode
backpointer checks. Also, it turns out we don't actually need the
BCH_INODE_BACKPTR_UNTRUSTED flag.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
For snapshots, when we allocate a new inode we want to allocate an inode
number that isn't in use in any other subvolume. We won't be able to use
ITER_SLOTS for this, inode allocation needs to change to use
BTREE_ITER_ALL_SNAPSHOTS.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This patch adds two new inode fields, bi_dir and bi_dir_offset, that
point back to the inode's dirent.
Since we're only adding fields for a single backpointer, files that have
been hardlinked won't necessarily have valid backpointers: we also add a
new inode flag, BCH_INODE_BACKPTR_UNTRUSTED, that's set if an inode has
ever had multiple links to it. That's ok, because we only really need
this functionality for directories, which can never have multiple
hardlinks - when we add subvolumes, we'll need a way to enemurate and
print subvolumes, and this will let us reconstruct a path to a subvolume
root given a subvolume root inode.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We had a cache coherency bug with the btree key cache in the fsck code -
this fixes fsck to be consistent about not using it.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
fsck doesn't know about the btree key cache, and non-cached iterators
aren't cache coherent (yet?)
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Previous varint implementation used by the inode code was not nearly as
fast as it could have been; partly because it was attempting to encode
integers up to 96 bits (for timestamps) but this meant that encoding and
decoding the length required a table lookup.
Instead, we'll just encode timestamps greater than 64 bits as two
separate varints; this will make decoding/encoding of inodes
significantly faster overall.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
On workloads that do a lot of multithreaded creates all at once, lock
contention on the inodes btree turns out to still be an issue.
This patch adds a small buffer of inode numbers that are known to be
free, so that we can avoid touching the btree on every create. Also,
this changes inode creates to update via the btree key cache for the
initial create.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The generic IO path now handles inode updates for i_size and i_sectors -
this means we can drop a fair amount of code from fs-io.c.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This refactoring makes the code easier to understand by separating the
bcachefs btree transactional code from the linux VFS code - but more
importantly, it's also to share code with the fuse port.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Now, we store blacklisted journal sequence numbers in the superblock,
not the journal: this helps to greatly simplify the code, and more
importantly it's now implemented in a way that doesn't require all btree
nodes to be visited before starting the journal - instead, we
unconditionally blacklist the next 4 journal sequence numbers after an
unclean shutdown.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Allows seeing xattrs that were inherited, not explicitly set
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
this lets us get rid of a lot of extra switch statements - in a lot of
places we dispatch on the btree node type, and then the key type, so
this is a nice cleanup across a lot of code.
Also improve the on disk format versioning stuff.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
was returning wrong value
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Initially forked from drivers/md/bcache, bcachefs is a new copy-on-write
filesystem with every feature you could possibly want.
Website: https://bcachefs.org
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
