| Age | Commit message (Collapse) | Author |
|---|
|
Damien reported a test failure with btrfs/209. The test itself ran fine,
but the fsck ran afterwards reported a corrupted filesystem.
The filesystem corruption happens because we're splitting an extent and
then writing the extent twice. We have to split the extent though, because
we're creating too large extents for a REQ_OP_ZONE_APPEND operation.
When dumping the extent tree, we can see two EXTENT_ITEMs at the same
start address but different lengths.
$ btrfs inspect dump-tree /dev/nullb1 -t extent
...
item 19 key (269484032 EXTENT_ITEM 126976) itemoff 15470 itemsize 53
refs 1 gen 7 flags DATA
extent data backref root FS_TREE objectid 257 offset 786432 count 1
item 20 key (269484032 EXTENT_ITEM 262144) itemoff 15417 itemsize 53
refs 1 gen 7 flags DATA
extent data backref root FS_TREE objectid 257 offset 786432 count 1
The duplicated EXTENT_ITEMs originally come from wrongly split extent_map in
extract_ordered_extent(). Since extract_ordered_extent() uses
create_io_em() to split an existing extent_map, we will have
split->orig_start != split->start. Then, it will be logged with non-zero
"extent data offset". Finally, the logged entries are replayed into
a duplicated EXTENT_ITEM.
Introduce and use proper splitting function for extent_map. The function is
intended to be simple and specific usage for extract_ordered_extent() e.g.
not supporting compression case (we do not allow splitting compressed
extent_map anyway).
There was a question raised by Qu, in summary why we want to split the
extent map (and not the bio):
The problem is not the limit on the zone end, which as you mention is
the same as the block group end. The problem is that data write use zone
append (ZA) operations. ZA BIOs cannot be split so a large extent may
need to be processed with multiple ZA BIOs, While that is also true for
regular writes, the major difference is that ZA are "nameless" write
operation giving back the written sectors on completion. And ZA
operations may be reordered by the block layer (not intentionally
though). Combine both of these characteristics and you can see that the
data for a large extent may end up being shuffled when written resulting
in data corruption and the impossibility to map the extent to some start
sector.
To avoid this problem, zoned btrfs uses the principle "one data extent
== one ZA BIO". So large extents need to be split. This is unfortunate,
but we can revisit this later and optimize, e.g. merge back together the
fragments of an extent once written if they actually were written
sequentially in the zone.
Reported-by: Damien Le Moal <damien.lemoal@wdc.com>
Fixes: d22002fd37bd ("btrfs: zoned: split ordered extent when bio is sent")
CC: stable@vger.kernel.org # 5.12+
CC: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The early check if we should attempt compression does not take into
account the number of input pages. It can happen that there's only one
page, eg. a tail page after some ranges of the BTRFS_MAX_UNCOMPRESSED
have been processed, or an isolated page that won't be converted to an
inline extent.
The single page would be compressed but a later check would drop it
again because the result size must be at least one block shorter than
the input. That can never work with just one page.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fix typos that have snuck in since the last round. Found by codespell.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
With current btrfs subpage rw support, the following script can lead to
fs hang:
$ mkfs.btrfs -f -s 4k $dev
$ mount $dev -o nospace_cache $mnt
$ fsstress -w -n 100 -p 1 -s 1608140256 -v -d $mnt
The fs will hang at btrfs_start_ordered_extent().
[CAUSE]
In above test case, btrfs_invalidate() will be called with the following
parameters:
offset = 0 length = 53248 page dirty = 1 subpage dirty bitmap = 0x2000
Since @offset is 0, btrfs_invalidate() will try to invalidate the full
page, and finally call clear_page_extent_mapped() which will detach
subpage structure from the page.
And since the page no longer has subpage structure, the subpage dirty
bitmap will be cleared, preventing the dirty range from being written
back, thus no way to wake up the ordered extent.
[FIX]
Just follow other filesystems, only to invalidate the page if the range
covers the full page.
There are cases like truncate_setsize() which can call
btrfs_invalidatepage() with offset == 0 and length != 0 for the last
page of an inode.
Although the old code will still try to invalidate the full page, we are
still safe to just wait for ordered extent to finish.
So it shouldn't cause extra problems.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Only set_page_dirty() and SetPageUptodate() is not subpage compatible.
Convert them to subpage helpers, so that __extent_writepage_io() can
submit page content correctly.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_truncate_block() itself is already mostly subpage compatible, the
only missing part is the page dirtying code.
Currently if we have a sector that needs to be truncated, we set the
sector aligned range delalloc, then set the full page dirty.
The problem is, current subpage code requires subpage dirty bit to be
set, or __extent_writepage_io() won't submit bio, thus leads to ordered
extent never to finish.
So this patch will make btrfs_truncate_block() to call
btrfs_page_set_dirty() helper to replace set_page_dirty() to fix the
problem.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Function btrfs_set_range_writeback() currently just sets the page
writeback unconditionally.
Change it to call the subpage helper so that we can handle both cases
well.
Since the subpage helpers needs btrfs_fs_info, also change the parameter
to accept btrfs_inode.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
__process_pages_contig()
In cow_file_range(), after we have succeeded creating an inline extent,
we unlock the page with extent_clear_unlock_delalloc() by passing
locked_page == NULL.
For sectorsize == PAGE_SIZE case, this is just making the page lock and
unlock harder to grab.
But for incoming subpage case, it can be a big problem.
For incoming subpage case, page locking have two entry points:
- __process_pages_contig()
In that case, we know exactly the range we want to lock (which only
requires sector alignment).
To handle the subpage requirement, we introduce btrfs_subpage::writers
to page::private, and will update it in __process_pages_contig().
- Other directly lock/unlock_page() call sites
Those won't touch btrfs_subpage::writers at all.
This means, page locked by __process_pages_contig() can only be unlocked
by __process_pages_contig().
Thankfully we already have the existing infrastructure in the form of
@locked_page in various call sites.
Unfortunately, extent_clear_unlock_delalloc() in cow_file_range() after
creating an inline extent is the exception.
It intentionally call extent_clear_unlock_delalloc() with locked_page ==
NULL, to also unlock current page (and clear its dirty/writeback bits).
To co-operate with incoming subpage modifications, and make the page
lock/unlock pair easier to understand, this patch will still call
extent_clear_unlock_delalloc() with locked_page, and only unlock the
page in __extent_writepage().
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This involves the following modification:
- Ordered extent creation
This is done in process_one_page(), now PAGE_SET_ORDERED will call
subpage helper to do the work.
- endio functions
This is done in btrfs_mark_ordered_io_finished().
- btrfs_invalidatepage()
- btrfs_cleanup_ordered_extents()
Use the subpage page helper, and add an extra branch to exit if the
locked page have covered the full range.
Now the usage of page Ordered flag for ordered extent accounting is fully
subpage compatible.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
When running subpage preparation patches on x86, btrfs/125 will hang
forever with one ordered extent never finished.
[CAUSE]
The test case btrfs/125 itself will always fail as the fix is never merged.
When the test fails at balance, btrfs needs to cleanup the ordered
extent in btrfs_cleanup_ordered_extents() for data reloc inode.
The problem is in the sequence how we cleanup the page Order bit.
Currently it works like:
btrfs_cleanup_ordered_extents()
|- find_get_page();
|- btrfs_page_clear_ordered(page);
| Now the page doesn't have Ordered bit anymore.
| !!! This also includes the first (locked) page !!!
|
|- offset += PAGE_SIZE
| This is to skip the first page
|- __endio_write_update_ordered()
|- btrfs_mark_ordered_io_finished(NULL)
Except the first page, all ordered extents are finished.
Then the locked page is cleaned up in __extent_writepage():
__extent_writepage()
|- If (PageError(page))
|- end_extent_writepage()
|- btrfs_mark_ordered_io_finished(page)
|- if (btrfs_test_page_ordered(page))
|- !!! The page gets skipped !!!
The ordered extent is not decreased as the page doesn't
have ordered bit anymore.
This leaves the ordered extent with bytes_left == sectorsize, thus never
finish.
[FIX]
The fix is to ensure we never clear page Ordered bit without running the
ordered extent accounting.
Here we choose to skip the locked page in
btrfs_cleanup_ordered_extents() so that later end_extent_writepage() can
properly finish the ordered extent.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Inside btrfs we use Private2 page status to indicate we have an ordered
extent with pending IO for the sector.
But the page status name, Private2, tells us nothing about the bit
itself, so this patch will rename it to Ordered.
And with extra comment about the bit added, so reader who is still
uncertain about the page Ordered status, will find the comment pretty
easily.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This patch will refactor btrfs_invalidatepage() for the incoming subpage
support.
The involved modifications are:
- Use while() loop instead of "goto again;"
- Use single variable to determine whether to delete extent states
Each branch will also have comments why we can or cannot delete the
extent states
- Do qgroup free and extent states deletion per-loop
Current code can only work for PAGE_SIZE == sectorsize case.
This refactor also makes it clear what we do for different sectors:
- Sectors without ordered extent
We're completely safe to remove all extent states for the sector(s)
- Sectors with ordered extent, but no Private2 bit
This means the endio has already been executed, we can't remove all
extent states for the sector(s).
- Sectors with ordere extent, still has Private2 bit
This means we need to decrease the ordered extent accounting.
And then it comes to two different variants:
* We have finished and removed the ordered extent
Then it's the same as "sectors without ordered extent"
* We didn't finished the ordered extent
We can remove some extent states, but not all.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The existing comments in btrfs_invalidatepage() don't really get to the
point, especially for what Private2 is really representing and how the
race avoidance is done.
The truth is, there are only three entrances to do ordered extent
accounting:
- btrfs_writepage_endio_finish_ordered()
- __endio_write_update_ordered()
Those two entrance are just endio functions for dio and buffered
write.
- btrfs_invalidatepage()
But there is a pitfall, in endio functions there is no check on whether
the ordered extent is already accounted.
They just blindly clear the Private2 bit and do the accounting.
So it's all btrfs_invalidatepage()'s responsibility to make sure we
won't do double account for the same sector.
That's why in btrfs_invalidatepage() we have to wait for page writeback,
this will ensure all submitted bios have finished, thus their endio
functions have finished the accounting on the ordered extent.
Then we also check page Private2 to ensure that, we only run ordered
extent accounting on pages who has no bio submitted.
This patch will rework related comments to make it more clear on the
race and how we use wait_on_page_writeback() and Private2 to prevent
double accounting on ordered extent.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Btrfs has two endio functions to mark certain io range finished for
ordered extents:
- __endio_write_update_ordered()
This is for direct IO
- btrfs_writepage_endio_finish_ordered()
This for buffered IO.
However they go different routines to handle ordered extent io:
- Whether to iterate through all ordered extents
__endio_write_update_ordered() will but
btrfs_writepage_endio_finish_ordered() will not.
In fact, iterating through all ordered extents will benefit later
subpage support, while for current PAGE_SIZE == sectorsize requirement
this behavior makes no difference.
- Whether to update page Private2 flag
__endio_write_update_ordered() will not update page Private2 flag as
for iomap direct IO, the page can not be even mapped.
While btrfs_writepage_endio_finish_ordered() will clear Private2 to
prevent double accounting against btrfs_invalidatepage().
Those differences are pretty subtle, and the ordered extent iterations
code in callers makes code much harder to read.
So this patch will introduce a new function,
btrfs_mark_ordered_io_finished(), to do the heavy lifting:
- Iterate through all ordered extents in the range
- Do the ordered extent accounting
- Queue the work for finished ordered extent
This function has two new feature:
- Proper underflow detection and recovery
The old underflow detection will only detect the problem, then
continue.
No proper info like root/inode/ordered extent info, nor noisy enough
to be caught by fstests.
Furthermore when underflow happens, the ordered extent will never
finish.
New error detection will reset the bytes_left to 0, do proper
kernel warning, and output extra info including root, ino, ordered
extent range, the underflow value.
- Prevent double accounting based on Private2 flag
Now if we find a range without Private2 flag, we will skip to next
range.
As that means someone else has already finished the accounting of
ordered extent.
This makes no difference for current code, but will be a critical part
for incoming subpage support, as we can call
btrfs_mark_ordered_io_finished() for multiple sectors if they are
beyond inode size.
Thus such double accounting prevention is a key feature for subpage.
Now both endio functions only need to call that new function.
And since the only caller of btrfs_dec_test_first_ordered_pending() is
removed, also remove btrfs_dec_test_first_ordered_pending() completely.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently we use page Private2 bit to indicate that we have ordered
extent for the page range.
But the lifespan of it is not consistent, during regular writeback path,
there are two locations to clear the same PagePrivate2:
T ----- Page marked Dirty
|
+ ----- Page marked Private2, through btrfs_run_dealloc_range()
|
+ ----- Page cleared Private2, through btrfs_writepage_cow_fixup()
| in __extent_writepage_io()
| ^^^ Private2 cleared for the first time
|
+ ----- Page marked Writeback, through btrfs_set_range_writeback()
| in __extent_writepage_io().
|
+ ----- Page cleared Private2, through
| btrfs_writepage_endio_finish_ordered()
| ^^^ Private2 cleared for the second time.
|
+ ----- Page cleared Writeback, through
btrfs_writepage_endio_finish_ordered()
Currently PagePrivate2 is mostly to prevent ordered extent accounting
being executed for both endio and invalidatepage.
Thus only the one who cleared page Private2 is responsible for ordered
extent accounting.
But the fact is, in btrfs_writepage_endio_finish_ordered(), page
Private2 is cleared and ordered extent accounting is executed
unconditionally.
The race prevention only happens through btrfs_invalidatepage(), where
we wait for the page writeback first, before checking the Private2 bit.
This means, Private2 is also protected by Writeback bit, and there is no
need for btrfs_writepage_cow_fixup() to clear Priavte2.
This patch will change btrfs_writepage_cow_fixup() to just check
PagePrivate2, not to clear it.
The clearing will happen in either btrfs_invalidatepage() or
btrfs_writepage_endio_finish_ordered().
This makes the Private2 bit easier to understand, just meaning the page
has unfinished ordered extent attached to it.
And this patch is a hard requirement for the incoming refactoring for
how we finished ordered IO for endio context, as the coming patch will
check Private2 to determine if we need to do the ordered extent
accounting. Thus this patch is definitely needed or we will hang due to
unfinished ordered extent.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There is a pretty bad abuse of btrfs_writepage_endio_finish_ordered() in
end_compressed_bio_write().
It passes compressed pages to btrfs_writepage_endio_finish_ordered(),
which is only supposed to accept inode pages.
Thankfully the important info here is the inode, so let's pass
btrfs_inode directly into btrfs_writepage_endio_finish_ordered(), and
make @page parameter optional.
By this, end_compressed_bio_write() can happily pass page=NULL while
still getting everything done properly.
Also, to cooperate with such modification, replace @page parameter for
trace_btrfs_writepage_end_io_hook() with btrfs_inode.
Although this removes page_index info, the existing start/len should be
enough for most usage.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There is a lot of code inside extent_io.c needs both "struct bio
**bio_ret" and "unsigned long prev_bio_flags", along with some
parameters like "unsigned long bio_flags".
Such strange parameters are here for bio assembly.
For example, we have such inode page layout:
0 4K 8K 12K
|<-- Extent A-->|<- EB->|
Then what we do is:
- Page [0, 4K)
*bio_ret = NULL
So we allocate a new bio to bio_ret,
Add page [0, 4K) to *bio_ret.
- Page [4K, 8K)
*bio_ret != NULL
We found this page is continuous to *bio_ret,
and if we're not at stripe boundary, we
add page [4K, 8K) to *bio_ret.
- Page [8K, 12K)
*bio_ret != NULL
But we found this page is not continuous, so
we submit *bio_ret, then allocate a new bio,
and add page [8K, 12K) to the new bio.
This means we need to record both the bio and its bio_flag, but we
record them manually using those strange parameter list, other than
encapsulating them into their own structure.
So this patch will introduce a new structure, btrfs_bio_ctrl, to record
both the bio, and its bio_flags.
Also, in above case, for all pages added to the bio, we need to check if
the new page crosses stripe boundary. This check itself can be time
consuming, and we don't really need to do that for each page.
This patch also integrates the stripe boundary check into btrfs_bio_ctrl.
When a new bio is allocated, the stripe and ordered extent boundary is
also calculated, so no matter how large the bio will be, we only
calculate the boundaries once, to save some CPU time.
The following functions/structures are affected:
- struct extent_page_data
Replace its bio pointer with structure btrfs_bio_ctrl (embedded
structure, not pointer)
- end_write_bio()
- flush_write_bio()
Just change how bio is fetched
- btrfs_bio_add_page()
Use pre-calculated boundaries instead of re-calculating them.
And use @bio_ctrl to replace @bio and @prev_bio_flags.
- calc_bio_boundaries()
New function
- submit_extent_page() callers
- btrfs_do_readpage() callers
- contiguous_readpages() callers
To Use @bio_ctrl to replace @bio and @prev_bio_flags, and how to grab
bio.
- btrfs_bio_fits_in_ordered_extent()
Removed, as now the ordered extent size limit is done at bio
allocation time, no need to check for each page range.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Function btrfs_bio_fits_in_stripe() now requires a bio with at least one
page added. Or btrfs_get_chunk_map() will fail with -ENOENT.
But in fact this requirement is not needed at all, as we can just pass
sectorsize for btrfs_get_chunk_map().
This tiny behavior change is important for later subpage refactoring on
submit_extent_page().
As for 64K page size, we can have a page range with pgoff=0 and size=64K.
If the logical bytenr is just 16K before the stripe boundary, we have to
split the page range into two bios.
This means, we must check page range against stripe boundary, even adding
the range to an empty bio.
This tiny refactoring is for the incoming changes, but on its own,
regular sectorsize == PAGE_SIZE is not affected anyway.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The parameter @len is not really used in btrfs_bio_fits_in_stripe(),
just remove it.
It got removed in 420343131970 ("btrfs: let callers of
btrfs_get_io_geometry pass the em"), before that btrfs_get_chunk_map
utilized it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At btrfs_truncate() where we truncate the inode either to the same size
or to a smaller size, we always set the full sync flag on the inode.
This is needed in case the truncation drops or trims any file extent items
that start beyond or cross the new inode size, so that the next fsync
drops all inode items from the log and scans again the fs/subvolume tree
to find all items that must be logged.
However if the truncation does not drop or trims any file extent items, we
do not need to set the full sync flag and force the next fsync to use the
slow code path. So do not set the full sync flag in such cases.
One use case where it is frequent to do truncations that do not change
the inode size and do not drop any extents (no prealloc extents beyond
i_size) is when running Microsoft's SQL Server inside a Docker container.
One example workload is the one Philipp Fent reported recently, in the
thread with a link below. In this workload a large number of fsyncs are
preceded by such truncate operations.
After this change I constantly get the runtime for that workload from
Philipp to be reduced by about -12%, for example from 184 seconds down
to 162 seconds.
Link: https://lore.kernel.org/linux-btrfs/93c4600e-5263-5cba-adf0-6f47526e7561@in.tum.de/
Tested-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The comment at the top of btrfs_truncate() mentions that csum items are
dropped or truncated to the new i_size, but this is wrong and non sense,
as they are unrelated to the i_size and are located in the csums tree and
not on a tree with inode items (fs/subvolume tree or a log tree). Instead
that claim applies to file extent items, so fix the comment to refer to
them instead.
While at it make the whole comment for the function more descriptive and
follow the kernel doc style.
Tested-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently btrfs_submit_read_repair() has some extra check on whether the
failed bio needs extra validation for repair. But we can avoid all
these extra mechanisms if we submit the repair for each sector.
By this, each read repair can be easily handled without the need to
verify which sector is corrupted.
This will also benefit subpage, as one subpage bvec can contain several
sectors, making the extra verification more complex.
So this patch will:
- Introduce repair_one_sector()
The main code submitting repair, which is more or less the same as old
btrfs_submit_read_repair().
But this time, it only repairs one sector.
- Make btrfs_submit_read_repair() to handle sectors differently
There are 3 different cases:
* Good sector
We need to release the page and extent, set the range uptodate.
* Bad sector and failed to submit repair bio
We need to release the page and extent, but not set the range
uptodate.
* Bad sector but repair bio submitted
The page and extent release will be handled by the submitted repair
bio. Nothing needs to be done.
Since btrfs_submit_read_repair() will handle the page and extent
release now, we need to skip to next bvec even we hit some error.
- Change the lifespan of @uptodate in end_bio_extent_readpage()
Since now btrfs_submit_read_repair() will handle the full bvec
which contains any corruption, we don't need to bother updating
@uptodate bit anymore.
Just let @uptodate to be local variable inside the main loop,
so that any error from one bvec won't affect later bvec.
- Only export btrfs_repair_one_sector(), unexport
btrfs_submit_read_repair()
The only outside caller for read repair is DIO, which already submits
its repair for just one sector.
Only export btrfs_repair_one_sector() for DIO.
This patch will focus on the change on the repair path, the extra
validation code is still kept as is, and will be cleaned up later.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This will provide the basis for later per-sector repair for subpage,
while still keeping the existing code happy.
As if all csums match, the return value will be 0, same as now.
Only when csum mismatches, the return value is different.
The new return value will be a bitmap, for 4K sectorsize and 4K page
size, it will be either 1, instead of the -EIO (which is not used
directly by the callers, no effective change).
But for 4K sectorsize and 64K page size, aka subpage case, since the
bvec can contain multiple sectors, knowing which sectors are corrupted
will allow us to submit repair only for corrupted sectors.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Error handling improvements, caught by error injection:
- handle errors during checksum deletion
- set error on mapping when ordered extent io cannot be finished
- inode link count fixup in tree-log
- missing return value checks for inode updates in tree-log
- abort transaction in rename exchange if adding second reference
fails
Fixes:
- fix fsync failure after writes to prealloc extents
- fix deadlock when cloning inline extents and low on available space
- fix compressed writes that cross stripe boundary"
* tag 'for-5.13-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
MAINTAINERS: add btrfs IRC link
btrfs: fix deadlock when cloning inline extents and low on available space
btrfs: fix fsync failure and transaction abort after writes to prealloc extents
btrfs: abort in rename_exchange if we fail to insert the second ref
btrfs: check error value from btrfs_update_inode in tree log
btrfs: fixup error handling in fixup_inode_link_counts
btrfs: mark ordered extent and inode with error if we fail to finish
btrfs: return errors from btrfs_del_csums in cleanup_ref_head
btrfs: fix error handling in btrfs_del_csums
btrfs: fix compressed writes that cross stripe boundary
|
|
Error injection stress uncovered a problem where we'd leave a dangling
inode ref if we failed during a rename_exchange. This happens because
we insert the inode ref for one side of the rename, and then for the
other side. If this second inode ref insert fails we'll leave the first
one dangling and leave a corrupt file system behind. Fix this by
aborting if we did the insert for the first inode ref.
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
While doing error injection testing I saw that sometimes we'd get an
abort that wouldn't stop the current transaction commit from completing.
This abort was coming from finish ordered IO, but at this point in the
transaction commit we should have gotten an error and stopped.
It turns out the abort came from finish ordered io while trying to write
out the free space cache. It occurred to me that any failure inside of
finish_ordered_io isn't actually raised to the person doing the writing,
so we could have any number of failures in this path and think the
ordered extent completed successfully and the inode was fine.
Fix this by marking the ordered extent with BTRFS_ORDERED_IOERR, and
marking the mapping of the inode with mapping_set_error, so any callers
that simply call fdatawait will also get the error.
With this we're seeing the IO error on the free space inode when we fail
to do the finish_ordered_io.
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes:
- fix unaligned compressed writes in zoned mode
- fix false positive lockdep warning when cloning inline extent
- remove wrong BUG_ON in tree-log error handling"
* tag 'for-5.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: fix parallel compressed writes
btrfs: zoned: pass start block to btrfs_use_zone_append
btrfs: do not BUG_ON in link_to_fixup_dir
btrfs: release path before starting transaction when cloning inline extent
|
|
btrfs_use_zone_append only needs the passed in extent_map's block_start
member, so there's no need to pass in the full extent map.
This also enables the use of btrfs_use_zone_append in places where we only
have a start byte but no extent_map.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes:
- fix fiemap to print extents that could get misreported due to
internal extent splitting and logical merging for fiemap output
- fix RCU stalls during delayed iputs
- fix removed dentries still existing after log is synced"
* tag 'for-5.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix removed dentries still existing after log is synced
btrfs: return whole extents in fiemap
btrfs: avoid RCU stalls while running delayed iputs
btrfs: return 0 for dev_extent_hole_check_zoned hole_start in case of error
|
|
Generally a delayed iput is added when we might do the final iput, so
usually we'll end up sleeping while processing the delayed iputs
naturally. However there's no guarantee of this, especially for small
files. In production we noticed 5 instances of RCU stalls while testing
a kernel release overnight across 1000 machines, so this is relatively
common:
host count: 5
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: ....: (20998 ticks this GP) idle=59e/1/0x4000000000000002 softirq=12333372/12333372 fqs=3208
(t=21031 jiffies g=27810193 q=41075) NMI backtrace for cpu 1
CPU: 1 PID: 1713 Comm: btrfs-cleaner Kdump: loaded Not tainted 5.6.13-0_fbk12_rc1_5520_gec92bffc1ec9 #1
Call Trace:
<IRQ> dump_stack+0x50/0x70
nmi_cpu_backtrace.cold.6+0x30/0x65
? lapic_can_unplug_cpu.cold.30+0x40/0x40
nmi_trigger_cpumask_backtrace+0xba/0xca
rcu_dump_cpu_stacks+0x99/0xc7
rcu_sched_clock_irq.cold.90+0x1b2/0x3a3
? trigger_load_balance+0x5c/0x200
? tick_sched_do_timer+0x60/0x60
? tick_sched_do_timer+0x60/0x60
update_process_times+0x24/0x50
tick_sched_timer+0x37/0x70
__hrtimer_run_queues+0xfe/0x270
hrtimer_interrupt+0xf4/0x210
smp_apic_timer_interrupt+0x5e/0x120
apic_timer_interrupt+0xf/0x20 </IRQ>
RIP: 0010:queued_spin_lock_slowpath+0x17d/0x1b0
RSP: 0018:ffffc9000da5fe48 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: 0000000000000000 RBX: ffff889fa81d0cd8 RCX: 0000000000000029
RDX: ffff889fff86c0c0 RSI: 0000000000080000 RDI: ffff88bfc2da7200
RBP: ffff888f2dcdd768 R08: 0000000001040000 R09: 0000000000000000
R10: 0000000000000001 R11: ffffffff82a55560 R12: ffff88bfc2da7200
R13: 0000000000000000 R14: ffff88bff6c2a360 R15: ffffffff814bd870
? kzalloc.constprop.57+0x30/0x30
list_lru_add+0x5a/0x100
inode_lru_list_add+0x20/0x40
iput+0x1c1/0x1f0
run_delayed_iput_locked+0x46/0x90
btrfs_run_delayed_iputs+0x3f/0x60
cleaner_kthread+0xf2/0x120
kthread+0x10b/0x130
Fix this by adding a cond_resched_lock() to the loop processing delayed
iputs so we can avoid these sort of stalls.
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"First batch of various fixes, here's a list of notable ones:
- fix unmountable seed device after fstrim
- fix silent data loss in zoned mode due to ordered extent splitting
- fix race leading to unpersisted data and metadata on fsync
- fix deadlock when cloning inline extents and using qgroups"
* tag 'for-5.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: initialize return variable in cleanup_free_space_cache_v1
btrfs: zoned: sanity check zone type
btrfs: fix unmountable seed device after fstrim
btrfs: fix deadlock when cloning inline extents and using qgroups
btrfs: fix race leading to unpersisted data and metadata on fsync
btrfs: do not consider send context as valid when trying to flush qgroups
btrfs: zoned: fix silent data loss after failure splitting ordered extent
|
|
There are many places where kmap/memset/kunmap patterns occur.
Use the newly lifted memzero_page() to eliminate direct uses of kmap and
leverage the new core functions use of kmap_local_page().
The development of this patch was aided by the following coccinelle
script:
// <smpl>
// SPDX-License-Identifier: GPL-2.0-only
// Find kmap/memset/kunmap pattern and replace with memset*page calls
//
// NOTE: Offsets and other expressions may be more complex than what the script
// will automatically generate. Therefore a catchall rule is provided to find
// the pattern which then must be evaluated by hand.
//
// Confidence: Low
// Copyright: (C) 2021 Intel Corporation
// URL: http://coccinelle.lip6.fr/
// Comments:
// Options:
//
// Then the memset pattern
//
@ memset_rule1 @
expression page, V, L, Off;
identifier ptr;
type VP;
@@
(
-VP ptr = kmap(page);
|
-ptr = kmap(page);
|
-VP ptr = kmap_atomic(page);
|
-ptr = kmap_atomic(page);
)
<+...
(
-memset(ptr, 0, L);
+memzero_page(page, 0, L);
|
-memset(ptr + Off, 0, L);
+memzero_page(page, Off, L);
|
-memset(ptr, V, L);
+memset_page(page, V, 0, L);
|
-memset(ptr + Off, V, L);
+memset_page(page, V, Off, L);
)
...+>
(
-kunmap(page);
|
-kunmap_atomic(ptr);
)
// Remove any pointers left unused
@
depends on memset_rule1
@
identifier memset_rule1.ptr;
type VP, VP1;
@@
-VP ptr;
... when != ptr;
? VP1 ptr;
//
// Catch all
//
@ memset_rule2 @
expression page;
identifier ptr;
expression GenTo, GenSize, GenValue;
type VP;
@@
(
-VP ptr = kmap(page);
|
-ptr = kmap(page);
|
-VP ptr = kmap_atomic(page);
|
-ptr = kmap_atomic(page);
)
<+...
(
//
// Some call sites have complex expressions within the memset/memcpy
// The follow are catch alls which need to be evaluated by hand.
//
-memset(GenTo, 0, GenSize);
+memzero_pageExtra(page, GenTo, GenSize);
|
-memset(GenTo, GenValue, GenSize);
+memset_pageExtra(page, GenValue, GenTo, GenSize);
)
...+>
(
-kunmap(page);
|
-kunmap_atomic(ptr);
)
// Remove any pointers left unused
@
depends on memset_rule2
@
identifier memset_rule2.ptr;
type VP, VP1;
@@
-VP ptr;
... when != ptr;
? VP1 ptr;
// </smpl>
Link: https://lkml.kernel.org/r/20210309212137.2610186-4-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are a few exceptional cases where cloning an inline extent needs to
copy the inline extent data into a page of the destination inode.
When this happens, we end up starting a transaction while having a dirty
page for the destination inode and while having the range locked in the
destination's inode iotree too. Because when reserving metadata space
for a transaction we may need to flush existing delalloc in case there is
not enough free space, we have a mechanism in place to prevent a deadlock,
which was introduced in commit 3d45f221ce627d ("btrfs: fix deadlock when
cloning inline extent and low on free metadata space").
However when using qgroups, a transaction also reserves metadata qgroup
space, which can also result in flushing delalloc in case there is not
enough available space at the moment. When this happens we deadlock, since
flushing delalloc requires locking the file range in the inode's iotree
and the range was already locked at the very beginning of the clone
operation, before attempting to start the transaction.
When this issue happens, stack traces like the following are reported:
[72747.556262] task:kworker/u81:9 state:D stack: 0 pid: 225 ppid: 2 flags:0x00004000
[72747.556268] Workqueue: writeback wb_workfn (flush-btrfs-1142)
[72747.556271] Call Trace:
[72747.556273] __schedule+0x296/0x760
[72747.556277] schedule+0x3c/0xa0
[72747.556279] io_schedule+0x12/0x40
[72747.556284] __lock_page+0x13c/0x280
[72747.556287] ? generic_file_readonly_mmap+0x70/0x70
[72747.556325] extent_write_cache_pages+0x22a/0x440 [btrfs]
[72747.556331] ? __set_page_dirty_nobuffers+0xe7/0x160
[72747.556358] ? set_extent_buffer_dirty+0x5e/0x80 [btrfs]
[72747.556362] ? update_group_capacity+0x25/0x210
[72747.556366] ? cpumask_next_and+0x1a/0x20
[72747.556391] extent_writepages+0x44/0xa0 [btrfs]
[72747.556394] do_writepages+0x41/0xd0
[72747.556398] __writeback_single_inode+0x39/0x2a0
[72747.556403] writeback_sb_inodes+0x1ea/0x440
[72747.556407] __writeback_inodes_wb+0x5f/0xc0
[72747.556410] wb_writeback+0x235/0x2b0
[72747.556414] ? get_nr_inodes+0x35/0x50
[72747.556417] wb_workfn+0x354/0x490
[72747.556420] ? newidle_balance+0x2c5/0x3e0
[72747.556424] process_one_work+0x1aa/0x340
[72747.556426] worker_thread+0x30/0x390
[72747.556429] ? create_worker+0x1a0/0x1a0
[72747.556432] kthread+0x116/0x130
[72747.556435] ? kthread_park+0x80/0x80
[72747.556438] ret_from_fork+0x1f/0x30
[72747.566958] Workqueue: btrfs-flush_delalloc btrfs_work_helper [btrfs]
[72747.566961] Call Trace:
[72747.566964] __schedule+0x296/0x760
[72747.566968] ? finish_wait+0x80/0x80
[72747.566970] schedule+0x3c/0xa0
[72747.566995] wait_extent_bit.constprop.68+0x13b/0x1c0 [btrfs]
[72747.566999] ? finish_wait+0x80/0x80
[72747.567024] lock_extent_bits+0x37/0x90 [btrfs]
[72747.567047] btrfs_invalidatepage+0x299/0x2c0 [btrfs]
[72747.567051] ? find_get_pages_range_tag+0x2cd/0x380
[72747.567076] __extent_writepage+0x203/0x320 [btrfs]
[72747.567102] extent_write_cache_pages+0x2bb/0x440 [btrfs]
[72747.567106] ? update_load_avg+0x7e/0x5f0
[72747.567109] ? enqueue_entity+0xf4/0x6f0
[72747.567134] extent_writepages+0x44/0xa0 [btrfs]
[72747.567137] ? enqueue_task_fair+0x93/0x6f0
[72747.567140] do_writepages+0x41/0xd0
[72747.567144] __filemap_fdatawrite_range+0xc7/0x100
[72747.567167] btrfs_run_delalloc_work+0x17/0x40 [btrfs]
[72747.567195] btrfs_work_helper+0xc2/0x300 [btrfs]
[72747.567200] process_one_work+0x1aa/0x340
[72747.567202] worker_thread+0x30/0x390
[72747.567205] ? create_worker+0x1a0/0x1a0
[72747.567208] kthread+0x116/0x130
[72747.567211] ? kthread_park+0x80/0x80
[72747.567214] ret_from_fork+0x1f/0x30
[72747.569686] task:fsstress state:D stack: 0 pid:841421 ppid:841417 flags:0x00000000
[72747.569689] Call Trace:
[72747.569691] __schedule+0x296/0x760
[72747.569694] schedule+0x3c/0xa0
[72747.569721] try_flush_qgroup+0x95/0x140 [btrfs]
[72747.569725] ? finish_wait+0x80/0x80
[72747.569753] btrfs_qgroup_reserve_data+0x34/0x50 [btrfs]
[72747.569781] btrfs_check_data_free_space+0x5f/0xa0 [btrfs]
[72747.569804] btrfs_buffered_write+0x1f7/0x7f0 [btrfs]
[72747.569810] ? path_lookupat.isra.48+0x97/0x140
[72747.569833] btrfs_file_write_iter+0x81/0x410 [btrfs]
[72747.569836] ? __kmalloc+0x16a/0x2c0
[72747.569839] do_iter_readv_writev+0x160/0x1c0
[72747.569843] do_iter_write+0x80/0x1b0
[72747.569847] vfs_writev+0x84/0x140
[72747.569869] ? btrfs_file_llseek+0x38/0x270 [btrfs]
[72747.569873] do_writev+0x65/0x100
[72747.569876] do_syscall_64+0x33/0x40
[72747.569879] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[72747.569899] task:fsstress state:D stack: 0 pid:841424 ppid:841417 flags:0x00004000
[72747.569903] Call Trace:
[72747.569906] __schedule+0x296/0x760
[72747.569909] schedule+0x3c/0xa0
[72747.569936] try_flush_qgroup+0x95/0x140 [btrfs]
[72747.569940] ? finish_wait+0x80/0x80
[72747.569967] __btrfs_qgroup_reserve_meta+0x36/0x50 [btrfs]
[72747.569989] start_transaction+0x279/0x580 [btrfs]
[72747.570014] clone_copy_inline_extent+0x332/0x490 [btrfs]
[72747.570041] btrfs_clone+0x5b7/0x7a0 [btrfs]
[72747.570068] ? lock_extent_bits+0x64/0x90 [btrfs]
[72747.570095] btrfs_clone_files+0xfc/0x150 [btrfs]
[72747.570122] btrfs_remap_file_range+0x3d8/0x4a0 [btrfs]
[72747.570126] do_clone_file_range+0xed/0x200
[72747.570131] vfs_clone_file_range+0x37/0x110
[72747.570134] ioctl_file_clone+0x7d/0xb0
[72747.570137] do_vfs_ioctl+0x138/0x630
[72747.570140] __x64_sys_ioctl+0x62/0xc0
[72747.570143] do_syscall_64+0x33/0x40
[72747.570146] entry_SYSCALL_64_after_hwframe+0x44/0xa9
So fix this by skipping the flush of delalloc for an inode that is
flagged with BTRFS_INODE_NO_DELALLOC_FLUSH, meaning it is currently under
such a special case of cloning an inline extent, when flushing delalloc
during qgroup metadata reservation.
The special cases for cloning inline extents were added in kernel 5.7 by
by commit 05a5a7621ce66c ("Btrfs: implement full reflink support for
inline extents"), while having qgroup metadata space reservation flushing
delalloc when low on space was added in kernel 5.9 by commit
c53e9653605dbf ("btrfs: qgroup: try to flush qgroup space when we get
-EDQUOT"). So use a "Fixes:" tag for the later commit to ease stable
kernel backports.
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Link: https://lore.kernel.org/linux-btrfs/20210421083137.31E3.409509F4@e16-tech.com/
Fixes: c53e9653605dbf ("btrfs: qgroup: try to flush qgroup space when we get -EDQUOT")
CC: stable@vger.kernel.org # 5.9+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull fileattr conversion updates from Miklos Szeredi via Al Viro:
"This splits the handling of FS_IOC_[GS]ETFLAGS from ->ioctl() into a
separate method.
The interface is reasonably uniform across the filesystems that
support it and gives nice boilerplate removal"
* 'miklos.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (23 commits)
ovl: remove unneeded ioctls
fuse: convert to fileattr
fuse: add internal open/release helpers
fuse: unsigned open flags
fuse: move ioctl to separate source file
vfs: remove unused ioctl helpers
ubifs: convert to fileattr
reiserfs: convert to fileattr
ocfs2: convert to fileattr
nilfs2: convert to fileattr
jfs: convert to fileattr
hfsplus: convert to fileattr
efivars: convert to fileattr
xfs: convert to fileattr
orangefs: convert to fileattr
gfs2: convert to fileattr
f2fs: convert to fileattr
ext4: convert to fileattr
ext2: convert to fileattr
btrfs: convert to fileattr
...
|
|
btrfs_record_root_in_trans will return errors in the future, so handle
the error properly in btrfs_delete_subvolume.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_record_root_in_trans will return errors in the future, so handle
the error properly in btrfs_rename.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_record_root_in_trans will return errors in the future, so handle
the error properly in btrfs_rename_exchange.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In btrfs_invalidatepage() we re-declare @tree variable as
btrfs_ordered_inode_tree.
Since it's only used to do the spinlock, we can grab it from inode
directly, and remove the unnecessary declaration completely.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In btrfs_invalidatepage() we introduce a temporary variable, new_len, to
update ordered->truncated_len. But we can use min() to replace it
completely and no need for the variable.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_orphan_cleanup() has a comment referring to find_dead_roots, but
function does not exists since commit cb517eabba4f10 ("Btrfs: cleanup the
similar code of the fs root read"). What we use now to find and load dead
roots is btrfs_find_orphan_roots(). So update the comment and make it a
bit more detailed about why we can not delete an orphan item for a root.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Use a simple coccinelle script to help convert the most common
kmap()/kunmap() patterns to kmap_local_page()/kunmap_local().
Note that some kmaps which were caught by this script needed to be
handled by hand because of the strict unmapping order of kunmap_local()
so they are not included in this patch. But this script got us started.
There's another temp variable added for the final length write to the
first page so it does not interfere with cpage_out that is used for
mapping other pages.
The development of this patch was aided by the follow script:
// <smpl>
// SPDX-License-Identifier: GPL-2.0-only
// Find kmap and replace with kmap_local_page then mark kunmap
//
// Confidence: Low
// Copyright: (C) 2021 Intel Corporation
// URL: http://coccinelle.lip6.fr/
@ catch_all @
expression e, e2;
@@
(
-kmap(e)
+kmap_local_page(e)
)
...
(
-kunmap(...)
+kunmap_local()
)
// </smpl>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have a race between marking that an inode needs to be logged, either
at btrfs_set_inode_last_trans() or at btrfs_page_mkwrite(), and between
btrfs_sync_log(). The following steps describe how the race happens.
1) We are at transaction N;
2) Inode I was previously fsynced in the current transaction so it has:
inode->logged_trans set to N;
3) The inode's root currently has:
root->log_transid set to 1
root->last_log_commit set to 0
Which means only one log transaction was committed to far, log
transaction 0. When a log tree is created we set ->log_transid and
->last_log_commit of its parent root to 0 (at btrfs_add_log_tree());
4) One more range of pages is dirtied in inode I;
5) Some task A starts an fsync against some other inode J (same root), and
so it joins log transaction 1.
Before task A calls btrfs_sync_log()...
6) Task B starts an fsync against inode I, which currently has the full
sync flag set, so it starts delalloc and waits for the ordered extent
to complete before calling btrfs_inode_in_log() at btrfs_sync_file();
7) During ordered extent completion we have btrfs_update_inode() called
against inode I, which in turn calls btrfs_set_inode_last_trans(),
which does the following:
spin_lock(&inode->lock);
inode->last_trans = trans->transaction->transid;
inode->last_sub_trans = inode->root->log_transid;
inode->last_log_commit = inode->root->last_log_commit;
spin_unlock(&inode->lock);
So ->last_trans is set to N and ->last_sub_trans set to 1.
But before setting ->last_log_commit...
8) Task A is at btrfs_sync_log():
- it increments root->log_transid to 2
- starts writeback for all log tree extent buffers
- waits for the writeback to complete
- writes the super blocks
- updates root->last_log_commit to 1
It's a lot of slow steps between updating root->log_transid and
root->last_log_commit;
9) The task doing the ordered extent completion, currently at
btrfs_set_inode_last_trans(), then finally runs:
inode->last_log_commit = inode->root->last_log_commit;
spin_unlock(&inode->lock);
Which results in inode->last_log_commit being set to 1.
The ordered extent completes;
10) Task B is resumed, and it calls btrfs_inode_in_log() which returns
true because we have all the following conditions met:
inode->logged_trans == N which matches fs_info->generation &&
inode->last_subtrans (1) <= inode->last_log_commit (1) &&
inode->last_subtrans (1) <= root->last_log_commit (1) &&
list inode->extent_tree.modified_extents is empty
And as a consequence we return without logging the inode, so the
existing logged version of the inode does not point to the extent
that was written after the previous fsync.
It should be impossible in practice for one task be able to do so much
progress in btrfs_sync_log() while another task is at
btrfs_set_inode_last_trans() right after it reads root->log_transid and
before it reads root->last_log_commit. Even if kernel preemption is enabled
we know the task at btrfs_set_inode_last_trans() can not be preempted
because it is holding the inode's spinlock.
However there is another place where we do the same without holding the
spinlock, which is in the memory mapped write path at:
vm_fault_t btrfs_page_mkwrite(struct vm_fault *vmf)
{
(...)
BTRFS_I(inode)->last_trans = fs_info->generation;
BTRFS_I(inode)->last_sub_trans = BTRFS_I(inode)->root->log_transid;
BTRFS_I(inode)->last_log_commit = BTRFS_I(inode)->root->last_log_commit;
(...)
So with preemption happening after setting ->last_sub_trans and before
setting ->last_log_commit, it is less of a stretch to have another task
do enough progress at btrfs_sync_log() such that the task doing the memory
mapped write ends up with ->last_sub_trans and ->last_log_commit set to
the same value. It is still a big stretch to get there, as the task doing
btrfs_sync_log() has to start writeback, wait for its completion and write
the super blocks.
So fix this in two different ways:
1) For btrfs_set_inode_last_trans(), simply set ->last_log_commit to the
value of ->last_sub_trans minus 1;
2) For btrfs_page_mkwrite() only set the inode's ->last_sub_trans, just
like we do for buffered and direct writes at btrfs_file_write_iter(),
which is all we need to make sure multiple writes and fsyncs to an
inode in the same transaction never result in an fsync missing that
the inode changed and needs to be logged. Turn this into a helper
function and use it both at btrfs_page_mkwrite() and at
btrfs_file_write_iter() - this also fixes the problem that at
btrfs_page_mkwrite() we were setting those fields without the
protection of the inode's spinlock.
This is an extremely unlikely race to happen in practice.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We need to be able to exclude page_mkwrite from happening concurrently
with certain operations. To facilitate this, add a i_mmap_lock to our
inode, down_read() it in our mkwrite, and add a new ILOCK flag to
indicate that we want to take the i_mmap_lock as well. I used pahole to
check the size of the btrfs_inode, the sizes are as follows
no lockdep:
before: 1120 (3 per 4k page)
after: 1160 (3 per 4k page)
lockdep:
before: 2072 (1 per 4k page)
after: 2224 (1 per 4k page)
We're slightly larger but it doesn't change how many objects we can fit
per page.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The parameter mirror is not used and does not make sense for checksum
verification of the given bio.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
force_cow can be calculated from inode and does not need to be passed as
an argument.
This simplifies run_delalloc_nocow() call from btrfs_run_delalloc_range()
A new function, should_nocow() checks if the range should be NOCOWed or
not. The function returns true iff either BTRFS_INODE_NODATA or
BTRFS_INODE_PREALLOC, but is not a defrag extent.
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_extent_readonly() checks if the block group is readonly, the bool
return type should be used.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_extent_readonly() is used by can_nocow_extent() in inode.c. So
move it from extent-tree.c to inode.c and declare it as static.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Use the fileattr API to let the VFS handle locking, permission checking and
conversion.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Fixes for issues that have some user visibility and are simple enough
for this time of development cycle:
- a few fixes for rescue= mount option, adding more checks for
missing trees
- fix sleeping in atomic context on qgroup deletion
- fix subvolume deletion on mount
- fix build with M= syntax
- fix checksum mismatch error message for direct io"
* tag 'for-5.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix check_data_csum() error message for direct I/O
btrfs: fix sleep while in non-sleep context during qgroup removal
btrfs: fix subvolume/snapshot deletion not triggered on mount
btrfs: fix build when using M=fs/btrfs
btrfs: do not initialize dev replace for bad dev root
btrfs: initialize device::fs_info always
btrfs: do not initialize dev stats if we have no dev_root
btrfs: zoned: remove outdated WARN_ON in direct IO
|
