| Age | Commit message (Collapse) | Author |
|---|
|
The root on the trans->root can be anything, and generally we're
committing from the transaction kthread so it's usually the tree_root.
Change this to just take an fs_info, and to maintain compatibility
simply put the ROOT_TREE_OBJECTID as the root objectid for the
tracepoint. This will allow use to remove trans->root.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently we do this awful thing where we get another ref on a trans
handle, async off that handle and commit the transaction from that work.
Because we do this we have to mess with current->journal_info and the
freeze counting stuff.
We already have an async thing to kick for the transaction commit, the
transaction kthread. Replace this work struct with a flag on the
fs_info to tell the kthread to go ahead and commit even if it's before
our timeout. Then we can drastically simplify the async transaction
commit path.
Note: this can be simplified and functionality based on the pending
operation COMMIT.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add note ]
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is no longer used, the -o nobarrier is handled by
BTRFS_MOUNT_NOBARRIER. Remove the flag.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Reshuffle the code inside the first loop of tree_search_offset so that
one if() is eliminated and the becomes more linear.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
When debugging calc_bio_boundaries(), I found that even for RAID1
metadata, we're following stripe length to calculate stripe boundary.
# mkfs.btrfs -m raid1 -d raid1 /dev/test/scratch[12]
# mount /dev/test/scratch /mnt/btrfs
# xfs_io -f -c "pwrite 0 64K" /mnt/btrfs/file
# umount
Above very basic operations will make calc_bio_boundaries() to report
the following result:
submit_extent_page: r/i=1/1 file_offset=22036480 len_to_stripe_boundary=49152
submit_extent_page: r/i=1/1 file_offset=30474240 len_to_stripe_boundary=65536
...
submit_extent_page: r/i=1/1 file_offset=30523392 len_to_stripe_boundary=16384
submit_extent_page: r/i=1/1 file_offset=30457856 len_to_stripe_boundary=16384
submit_extent_page: r/i=5/257 file_offset=0 len_to_stripe_boundary=65536
submit_extent_page: r/i=5/257 file_offset=65536 len_to_stripe_boundary=65536
submit_extent_page: r/i=1/1 file_offset=30490624 len_to_stripe_boundary=49152
submit_extent_page: r/i=1/1 file_offset=30507008 len_to_stripe_boundary=32768
Where "r/i" is the rootid and inode, 1/1 means they metadata.
The remaining names match the member used in kernel.
Even all data/metadata are using RAID1, we're still following stripe
length.
[CAUSE]
This behavior is caused by a wrong condition in btrfs_get_io_geometry():
if (map->type & BTRFS_BLOCK_GROUP_PROFILE_MASK) {
/* Fill using stripe_len */
len = min_t(u64, em->len - offset, max_len);
} else {
len = em->len - offset;
}
This means, only for SINGLE we will not follow stripe_len.
However for profiles like RAID1*, DUP, they don't need to bother
stripe_len.
This can lead to unnecessary bio split for RAID1*/DUP profiles, and can
even be a blockage for future zoned RAID support.
[FIX]
Introduce one single-use macro, BTRFS_BLOCK_GROUP_STRIPE_MASK, and
change the condition to only calculate the length using stripe length
for stripe based profiles.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is a small optimisation since the currently 'entry' is already
checked in the if () {} else if {} construct above the loop. In essence
the first iteration of the final while loop is redundant. To eliminate
this extra check simply get the next entry at the beginning of the loop.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
I noticed a few corner cases when looking at my bytes_index patch for
obvious bugs, so add a bunch of tests to validate proper behavior of the
bytes_index tree. A couple of basic tests to make sure it puts things
in the correct order, and then more complicated tests to make sure it
re-arranges bitmap entries properly and does the right thing when we try
to make allocations.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently we index free space on offset only, because usually we have a
hint from the allocator that we want to honor for locality reasons.
However if we fail to use this hint we have to go back to a brute force
search through the free space entries to find a large enough extent.
With sufficiently fragmented free space this becomes quite expensive, as
we have to linearly search all of the free space entries to find if we
have a part that's long enough.
To fix this add a cached rb tree to index based on free space entry
bytes. This will allow us to quickly look up the largest chunk in the
free space tree for this block group, and stop searching once we've
found an entry that is too small to satisfy our allocation. We simply
choose to use this tree if we're searching from the beginning of the
block group, as we know we do not care about locality at that point.
I wrote an allocator test that creates a 10TiB ram backed null block
device and then fallocates random files until the file system is full.
I think go through and delete all of the odd files. Then I spawn 8
threads that fallocate 64MiB files (1/2 our extent size cap) until the
file system is full again. I use bcc's funclatency to measure the
latency of find_free_extent. The baseline results are
nsecs : count distribution
0 -> 1 : 0 | |
2 -> 3 : 0 | |
4 -> 7 : 0 | |
8 -> 15 : 0 | |
16 -> 31 : 0 | |
32 -> 63 : 0 | |
64 -> 127 : 0 | |
128 -> 255 : 0 | |
256 -> 511 : 10356 |**** |
512 -> 1023 : 58242 |************************* |
1024 -> 2047 : 74418 |******************************** |
2048 -> 4095 : 90393 |****************************************|
4096 -> 8191 : 79119 |*********************************** |
8192 -> 16383 : 35614 |*************** |
16384 -> 32767 : 13418 |***** |
32768 -> 65535 : 12811 |***** |
65536 -> 131071 : 17090 |******* |
131072 -> 262143 : 26465 |*********** |
262144 -> 524287 : 40179 |***************** |
524288 -> 1048575 : 55469 |************************ |
1048576 -> 2097151 : 48807 |********************* |
2097152 -> 4194303 : 26744 |*********** |
4194304 -> 8388607 : 35351 |*************** |
8388608 -> 16777215 : 13918 |****** |
16777216 -> 33554431 : 21 | |
avg = 908079 nsecs, total: 580889071441 nsecs, count: 639690
And the patch results are
nsecs : count distribution
0 -> 1 : 0 | |
2 -> 3 : 0 | |
4 -> 7 : 0 | |
8 -> 15 : 0 | |
16 -> 31 : 0 | |
32 -> 63 : 0 | |
64 -> 127 : 0 | |
128 -> 255 : 0 | |
256 -> 511 : 6883 |** |
512 -> 1023 : 54346 |********************* |
1024 -> 2047 : 79170 |******************************** |
2048 -> 4095 : 98890 |****************************************|
4096 -> 8191 : 81911 |********************************* |
8192 -> 16383 : 27075 |********** |
16384 -> 32767 : 14668 |***** |
32768 -> 65535 : 13251 |***** |
65536 -> 131071 : 15340 |****** |
131072 -> 262143 : 26715 |********** |
262144 -> 524287 : 43274 |***************** |
524288 -> 1048575 : 53870 |********************* |
1048576 -> 2097151 : 55368 |********************** |
2097152 -> 4194303 : 41036 |**************** |
4194304 -> 8388607 : 24927 |********** |
8388608 -> 16777215 : 33 | |
16777216 -> 33554431 : 9 | |
avg = 623599 nsecs, total: 397259314759 nsecs, count: 637042
There's a little variation in the amount of calls done because of timing
of the threads with metadata requirements, but the avg, total, and
count's are relatively consistent between runs (usually within 2-5% of
each other). As you can see here we have around a 30% decrease in
average latency with a 30% decrease in overall time spent in
find_free_extent.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
While adding self tests for my space index change I was hitting a
problem where the space indexed tree wasn't returning the expected
->max_extent_size. This is because we will skip searching any entry
that doesn't have ->bytes >= the amount of bytes we want. However we'll
still set the max_extent_size based on that entry. The problem is if we
don't search the bitmap we won't have ->max_extent_size set properly, so
we can't really trust it.
This doesn't really result in a problem per-se, it can just result in us
not finding contiguous area that may exist. Fix the max_extent_size
helper to return ->bytes if ->max_extent_size isn't set, and add a big
comment explaining why we're doing this.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We use @nr_written to record how many pages have been started by
btrfs_run_delalloc_range().
Currently there are only two cases that would populate @nr_written:
- Inline extent creation
- Compressed write
But both cases will also set @page_started to one.
In fact, in writepage_delalloc() we have the following code, showing
that @nr_written is really only utilized for above two cases:
/* did the fill delalloc function already unlock and start
* the IO?
*/
if (page_started) {
/*
* we've unlocked the page, so we can't update
* the mapping's writeback index, just update
* nr_to_write.
*/
wbc->nr_to_write -= nr_written;
return 1;
}
But for such cases, writepage_delalloc() will return 1, and exit
__extent_writepage() without going through __extent_writepage_io().
Thus this means, inside __extent_writepage_io(), we always get
@nr_written as 0.
So this patch is going to remove the unnecessary parameter from the
following functions:
- writepage_delalloc()
As @nr_written passed in is always the initial value 0.
Although inside that function, we still need a local @nr_written
to update wbc->nr_to_write.
- __extent_writepage_io()
As explained above, @nr_written passed in can only be 0.
This also means we can remove one update_nr_written() call.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We used to need the root for btrfs_reserve_metadata_bytes to check the
orphan cleanup state, but we no longer need that, we simply need the
fs_info. Change btrfs_reserve_metadata_bytes() to use the fs_info, and
change both btrfs_block_rsv_refill() and btrfs_block_rsv_add() to do the
same as they simply call btrfs_reserve_metadata_bytes() and then
manipulate the block_rsv that is being used.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we don't care about the stage of the orphan_cleanup_state,
simply replace it with a bit on ->state to make sure we don't call the
orphan cleanup every time we wander into this root.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is very old code before we were stealing from the global reserve
during evict. We have proper ways to steal from the global reserve
while we're evicting, so rip out this code as it's no longer necessary.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
I forgot to convert this over when I introduced the global reserve
stealing code to the space flushing code. Evict was simply trying to
make its reservation and then if it failed it would steal from the
global rsv, which is racey because it's outside of the normal ticketing
code.
Fix this by setting ticket->steal if we are BTRFS_RESERVE_FLUSH_EVICT,
and then make the priority flushing path do the steal for us.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We're going to use this helper in the priority flushing loop, move this
check into the helper to simplify the logic.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since we're dropping locks before we enter the priority flushing loops
we could have had our ticket granted before we got the space_info->lock.
So add this check to avoid doing some extra flushing in the priority
flushing cases.
The case in priority_reclaim_metadata_space is an optimization. Think
we came in to reserve, we didn't have the space, we added our ticket to
the list. But at the same time somebody was waiting on the space_info
lock to add space and do btrfs_try_granting_ticket(), so we drop the
lock, get satisfied, come in to do our loop, and we have been
satisfied.
This is the priority reclaim path, so to_reclaim could be !0 still
because we may have only satisfied the priority tickets and still left
non priority tickets on the list. We would then have to_reclaim but
->bytes == 0.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add note about the optimization ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently the error case for the priority tickets is handled where we
deal with all of the tickets, priority and non-priority. This is OK in
general, but it makes for some awkward locking. We take and drop the
space_info->lock back to back because of these different types of
tickets.
Rework the code to handle priority ticket failures in their respective
helpers. This allows us to be less wonky with our space_info->lock
usage, and means that the main handler simply has to check
ticket->error, as the ticket is guaranteed to be off any list and
completely handled by the time it exits one of the handlers.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When mounting a device, we are reporting the zones twice: once for
checking the zone attributes in btrfs_get_dev_zone_info and once for
loading block groups' zone info in
btrfs_load_block_group_zone_info(). With a lot of block groups, that
leads to a lot of REPORT ZONE commands and slows down the mount
process.
This patch introduces a zone info cache in struct
btrfs_zoned_device_info. The cache is populated while in
btrfs_get_dev_zone_info() and used for
btrfs_load_block_group_zone_info() to reduce the number of REPORT ZONE
commands. The zone cache is then released after loading the block
groups, as it will not be much effective during the run time.
Benchmark: Mount an HDD with 57,007 block groups
Before patch: 171.368 seconds
After patch: 64.064 seconds
While it still takes a minute due to the slowness of loading all the
block groups, the patch reduces the mount time by 1/3.
Link: https://lore.kernel.org/linux-btrfs/CAHQ7scUiLtcTqZOMMY5kbWUBOhGRwKo6J6wYPT5WY+C=cD49nQ@mail.gmail.com/
Fixes: 5b316468983d ("btrfs: get zone information of zoned block devices")
CC: stable@vger.kernel.org
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since commit ba8a9d079543 ("Btrfs: delete the entire async bio submission
framework") removed submit workqueues, the parameter fs_devices is not used
anymore.
Remove it, no functional changes.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Su Yue <l@damenly.su>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In the transaction commit path we are acquiring the tree log mutex too
early and we have a stale comment because:
1) It mentions a function named btrfs_commit_tree_roots(), which does not
exists anymore, it was the old name of commit_cowonly_roots(), renamed
a very long time ago by commit 5d4f98a28c7d33 ("Btrfs: Mixed back
reference (FORWARD ROLLING FORMAT CHANGE)"));
2) It mentions that we need to acquire the tree log mutex at that point
to ensure we have no running log writers. That is not correct anymore,
for many years at least, since we are guaranteed that we do not have
any log writers at that point simply because we have set the state of
the transaction to TRANS_STATE_COMMIT_DOING and have waited for all
writers to complete - meaning no one can log until we change the state
of the transaction to TRANS_STATE_UNBLOCKED. Any attempts to join the
transaction or start a new one will block until we do that state
transition;
3) The comment mentions a "trans mutex" which doesn't exists since 2011,
commit a4abeea41adf ("Btrfs: kill trans_mutex") removed it;
4) The current use of the tree log mutex is to ensure proper serialization
of super block writes - if someone started a new transaction and uses it
for logging, it will wait for the previous transaction to write its
super block before writing the super block when attempting to sync the
log.
So acquire the tree log mutex only when it's absolutely needed, before
setting the transaction state to TRANS_STATE_UNBLOCKED, fix and move the
stale comment, add some assertions and new comments where appropriate.
Also, this has no effect on concurrency or performance, since the new
start of the critical section is still when the transaction is in the
state TRANS_STATE_COMMIT_DOING.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_prepare_sprout() splices seed devices into its own struct fs_devices,
so that its parent function btrfs_init_new_device() can add the new sprout
device to fs_info->fs_devices.
Both btrfs_prepare_sprout() and btrfs_init_new_device() need
device_list_mutex. But they are holding it separately, thus create a
small race window. Close it and hold device_list_mutex across both
functions btrfs_init_new_device() and btrfs_prepare_sprout().
Split btrfs_prepare_sprout() into btrfs_init_sprout() and
btrfs_setup_sprout(). This split is essential because device_list_mutex
must not be held for allocations in btrfs_init_sprout() but must be held
for btrfs_setup_sprout(). So now a common device_list_mutex can be used
between btrfs_init_new_device() and btrfs_setup_sprout().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Declare int seeding_dev as a bool. Also, move its declaration a line
below to adjust packing.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Again, I don't think this was ever used since iterate_dir_item() is only
used for xattrs. No functional change.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
As far as I can tell, this was never used. No functional change.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The name btrfs_item_end_nr() is a bit of a misnomer, as it's actually
the offset of the end of the data the item points to. In fact all of
the helpers that we use btrfs_item_end_nr() use data in their name, like
BTRFS_LEAF_DATA_SIZE() and leaf_data(). Rename to btrfs_item_data_end()
to make it clear what this helper is giving us.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We're only using btrfs_item_end() from btrfs_item_end_nr(), so this can
be collapsed.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that all call sites are using the slot number to modify item values,
rename the SETGET helpers to raw_item_*(), and then rework the _nr()
helpers to be the btrfs_item_*() btrfs_set_item_*() helpers, and then
rename all of the callers to the new helpers.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The last remaining place where we have the pattern of
item = btrfs_item_nr(slot)
<do something with the item>
are the token helpers. Handle this by introducing token helpers that
will do the btrfs_item_nr() work inside of the helper itself, and then
convert all users of the btrfs_item token helpers to the new _nr()
variants.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of getting the btrfs_item for this, simply pass in the slot of
the item and then use the btrfs_item_size_nr() helper inside of
btrfs_file_extent_inline_item_len().
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have the pattern of
item = btrfs_item_nr(slot);
btrfs_set_item_*(leaf, item);
in a bunch of places in our code. Fix this by adding
btrfs_set_item_*_nr() helpers which will do the appropriate work, and
replace those calls with
btrfs_set_item_*_nr(leaf, slot);
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have this pattern in a lot of places
item = btrfs_item_nr(slot);
btrfs_item_size(leaf, item);
when we could simply use
btrfs_item_size(leaf, slot);
Fix all callers of btrfs_item_size() and btrfs_item_offset() to use the
_nr variation of the helpers.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we log only dir index keys when logging a directory, we no longer
need to deal with dir item keys in the log replay code for replaying
directory deletes. This is also true for the case when we replay a log
tree created by a kernel that still logs dir items.
So remove the remaining code of the replay of directory deletes algorithm
that deals with dir item keys.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently, when logging a directory, we copy both dir items and dir index
items from the fs/subvolume tree to the log tree. Both items have exactly
the same data (same struct btrfs_dir_item), the difference lies in the key
values, where a dir index key contains the index number of a directory
entry while the dir item key does not, as it's used for doing fast lookups
of an entry by name, while the former is used for sorting entries when
listing a directory.
We can exploit that and log only the dir index items, since they contain
all the information needed to correctly add, replace and delete directory
entries when replaying a log tree. Logging only the dir index items is
also backward and forward compatible: an unpatched kernel (without this
change) can correctly replay a log tree generated by a patched kernel
(with this patch), and a patched kernel can correctly replay a log tree
generated by an unpatched kernel.
The backward compatibility is ensured because:
1) For inserting a new dentry: a dentry is only inserted when we find a
new dir index key - we can only insert if we know the dir index offset,
which is encoded in the dir index key's offset;
2) For deleting dentries: during log replay, before adding or replacing
dentries, we first replay dentry deletions. Whenever we find a dir item
key or a dir index key in the subvolume/fs tree that is not logged in
a range for which the log tree is authoritative, we do the unlink of
the dentry, which removes both the existing dir item key and the dir
index key. Therefore logging just dir index keys is enough to ensure
dentry deletions are correctly replayed;
3) For dentry replacements: they work when we log only dir index keys
and this is mostly due to a combination of 1) and 2). If we replace a
dentry with name "foobar" to point from inode A to inode B, then we
know the dir index key for the new dentry is different from the old
one, as it has an index number (key offset) larger than the old one.
This results in replaying a deletion, through replay_dir_deletes(),
that causes the old dentry to be removed, both the dir item key and
the dir index key, as mentioned at 2). Then when processing the new
dir index key, we add the new dentry, adding both a new dir item key
and a new index key pointing to inode B, as stated in 1).
The forward compatibility, the ability for a patched kernel to replay a
log created by an older, unpatched kernel, comes from the changes required
for making sure we are able to replay a log that only contains dir index
keys - we simply ignore every dir item key we find.
So modify directory logging to log only dir index items, and modify the
log replay process to ignore dir item keys, from log trees created by an
unpatched kernel, and process only with dir index keys. This reduces the
amount of logged metadata by about half, and therefore the time spent
logging or fsyncing large directories (less CPU time and less IO).
The following test script was used to measure this change:
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
NUM_NEW_FILES=1000000
NUM_FILE_DELETES=10000
mkfs.btrfs -f $DEV
mount -o ssd $DEV $MNT
mkdir $MNT/testdir
for ((i = 1; i <= $NUM_NEW_FILES; i++)); do
echo -n > $MNT/testdir/file_$i
done
start=$(date +%s%N)
xfs_io -c "fsync" $MNT/testdir
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "dir fsync took $dur ms after adding $NUM_NEW_FILES files"
# sync to force transaction commit and wipeout the log.
sync
del_inc=$(( $NUM_NEW_FILES / $NUM_FILE_DELETES ))
for ((i = 1; i <= $NUM_NEW_FILES; i += $del_inc)); do
rm -f $MNT/testdir/file_$i
done
start=$(date +%s%N)
xfs_io -c "fsync" $MNT/testdir
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "dir fsync took $dur ms after deleting $NUM_FILE_DELETES files"
echo
umount $MNT
The tests were run on a physical machine, with a non-debug kernel (Debian's
default kernel config), for different values of $NUM_NEW_FILES and
$NUM_FILE_DELETES, and the results were the following:
** Before patch, NUM_NEW_FILES = 1 000 000, NUM_DELETE_FILES = 10 000 **
dir fsync took 8412 ms after adding 1000000 files
dir fsync took 500 ms after deleting 10000 files
** After patch, NUM_NEW_FILES = 1 000 000, NUM_DELETE_FILES = 10 000 **
dir fsync took 4252 ms after adding 1000000 files (-49.5%)
dir fsync took 269 ms after deleting 10000 files (-46.2%)
** Before patch, NUM_NEW_FILES = 100 000, NUM_DELETE_FILES = 1 000 **
dir fsync took 745 ms after adding 100000 files
dir fsync took 59 ms after deleting 1000 files
** After patch, NUM_NEW_FILES = 100 000, NUM_DELETE_FILES = 1 000 **
dir fsync took 404 ms after adding 100000 files (-45.8%)
dir fsync took 31 ms after deleting 1000 files (-47.5%)
** Before patch, NUM_NEW_FILES = 10 000, NUM_DELETE_FILES = 1 000 **
dir fsync took 67 ms after adding 10000 files
dir fsync took 9 ms after deleting 1000 files
** After patch, NUM_NEW_FILES = 10 000, NUM_DELETE_FILES = 1 000 **
dir fsync took 36 ms after adding 10000 files (-46.3%)
dir fsync took 5 ms after deleting 1000 files (-44.4%)
** Before patch, NUM_NEW_FILES = 1 000, NUM_DELETE_FILES = 100 **
dir fsync took 9 ms after adding 1000 files
dir fsync took 4 ms after deleting 100 files
** After patch, NUM_NEW_FILES = 1 000, NUM_DELETE_FILES = 100 **
dir fsync took 7 ms after adding 1000 files (-22.2%)
dir fsync took 3 ms after deleting 100 files (-25.0%)
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since both unused block groups and reclaim bgs lists are protected by
unused_bgs_lock then free them in the same critical section without
doing an extra unlock/lock pair.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When enabling quotas, we attempt to commit a transaction while holding the
mutex fs_info->qgroup_ioctl_lock. This can result on a deadlock with other
quota operations such as:
- qgroup creation and deletion, ioctl BTRFS_IOC_QGROUP_CREATE;
- adding and removing qgroup relations, ioctl BTRFS_IOC_QGROUP_ASSIGN.
This is because these operations join a transaction and after that they
attempt to lock the mutex fs_info->qgroup_ioctl_lock. Acquiring that mutex
after joining or starting a transaction is a pattern followed everywhere
in qgroups, so the quota enablement operation is the one at fault here,
and should not commit a transaction while holding that mutex.
Fix this by making the transaction commit while not holding the mutex.
We are safe from two concurrent tasks trying to enable quotas because
we are serialized by the rw semaphore fs_info->subvol_sem at
btrfs_ioctl_quota_ctl(), which is the only call site for enabling
quotas.
When this deadlock happens, it produces a trace like the following:
INFO: task syz-executor:25604 blocked for more than 143 seconds.
Not tainted 5.15.0-rc6 #4
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor state:D stack:24800 pid:25604 ppid: 24873 flags:0x00004004
Call Trace:
context_switch kernel/sched/core.c:4940 [inline]
__schedule+0xcd9/0x2530 kernel/sched/core.c:6287
schedule+0xd3/0x270 kernel/sched/core.c:6366
btrfs_commit_transaction+0x994/0x2e90 fs/btrfs/transaction.c:2201
btrfs_quota_enable+0x95c/0x1790 fs/btrfs/qgroup.c:1120
btrfs_ioctl_quota_ctl fs/btrfs/ioctl.c:4229 [inline]
btrfs_ioctl+0x637e/0x7b70 fs/btrfs/ioctl.c:5010
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f86920b2c4d
RSP: 002b:00007f868f61ac58 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f86921d90a0 RCX: 00007f86920b2c4d
RDX: 0000000020005e40 RSI: 00000000c0109428 RDI: 0000000000000008
RBP: 00007f869212bd80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f86921d90a0
R13: 00007fff6d233e4f R14: 00007fff6d233ff0 R15: 00007f868f61adc0
INFO: task syz-executor:25628 blocked for more than 143 seconds.
Not tainted 5.15.0-rc6 #4
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor state:D stack:29080 pid:25628 ppid: 24873 flags:0x00004004
Call Trace:
context_switch kernel/sched/core.c:4940 [inline]
__schedule+0xcd9/0x2530 kernel/sched/core.c:6287
schedule+0xd3/0x270 kernel/sched/core.c:6366
schedule_preempt_disabled+0xf/0x20 kernel/sched/core.c:6425
__mutex_lock_common kernel/locking/mutex.c:669 [inline]
__mutex_lock+0xc96/0x1680 kernel/locking/mutex.c:729
btrfs_remove_qgroup+0xb7/0x7d0 fs/btrfs/qgroup.c:1548
btrfs_ioctl_qgroup_create fs/btrfs/ioctl.c:4333 [inline]
btrfs_ioctl+0x683c/0x7b70 fs/btrfs/ioctl.c:5014
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Reported-by: Hao Sun <sunhao.th@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CACkBjsZQF19bQ1C6=yetF3BvL10OSORpFUcWXTP6HErshDB4dQ@mail.gmail.com/
Fixes: 340f1aa27f36 ("btrfs: qgroups: Move transaction management inside btrfs_quota_enable/disable")
CC: stable@vger.kernel.org # 4.19
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When doing a direct IO write against a file range that either has
preallocated extents in that range or has regular extents and the file
has the NOCOW attribute set, the write fails with -ENOSPC when all of
the following conditions are met:
1) There are no data blocks groups with enough free space matching
the size of the write;
2) There's not enough unallocated space for allocating a new data block
group;
3) The extents in the target file range are not shared, neither through
snapshots nor through reflinks.
This is wrong because a NOCOW write can be done in such case, and in fact
it's possible to do it using a buffered IO write, since when failing to
allocate data space, the buffered IO path checks if a NOCOW write is
possible.
The failure in direct IO write path comes from the fact that early on,
at btrfs_dio_iomap_begin(), we try to allocate data space for the write
and if it that fails we return the error and stop - we never check if we
can do NOCOW. But later, at btrfs_get_blocks_direct_write(), we check
if we can do a NOCOW write into the range, or a subset of the range, and
then release the previously reserved data space.
Fix this by doing the data reservation only if needed, when we must COW,
at btrfs_get_blocks_direct_write() instead of doing it at
btrfs_dio_iomap_begin(). This also simplifies a bit the logic and removes
the inneficiency of doing unnecessary data reservations.
The following example test script reproduces the problem:
$ cat dio-nocow-enospc.sh
#!/bin/bash
DEV=/dev/sdj
MNT=/mnt/sdj
# Use a small fixed size (1G) filesystem so that it's quick to fill
# it up.
# Make sure the mixed block groups feature is not enabled because we
# later want to not have more space available for allocating data
# extents but still have enough metadata space free for the file writes.
mkfs.btrfs -f -b $((1024 * 1024 * 1024)) -O ^mixed-bg $DEV
mount $DEV $MNT
# Create our test file with the NOCOW attribute set.
touch $MNT/foobar
chattr +C $MNT/foobar
# Now fill in all unallocated space with data for our test file.
# This will allocate a data block group that will be full and leave
# no (or a very small amount of) unallocated space in the device, so
# that it will not be possible to allocate a new block group later.
echo
echo "Creating test file with initial data..."
xfs_io -c "pwrite -S 0xab -b 1M 0 900M" $MNT/foobar
# Now try a direct IO write against file range [0, 10M[.
# This should succeed since this is a NOCOW file and an extent for the
# range was previously allocated.
echo
echo "Trying direct IO write over allocated space..."
xfs_io -d -c "pwrite -S 0xcd -b 10M 0 10M" $MNT/foobar
umount $MNT
When running the test:
$ ./dio-nocow-enospc.sh
(...)
Creating test file with initial data...
wrote 943718400/943718400 bytes at offset 0
900 MiB, 900 ops; 0:00:01.43 (625.526 MiB/sec and 625.5265 ops/sec)
Trying direct IO write over allocated space...
pwrite: No space left on device
A test case for fstests will follow, testing both this direct IO write
scenario as well as the buffered IO write scenario to make it less likely
to get future regressions on the buffered IO case.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes, almost all error handling one-liners and for stable.
- regression fix in directory logging items
- regression fix of extent buffer status bits handling after an error
- fix memory leak in error handling path in tree-log
- fix freeing invalid anon device number when handling errors during
subvolume creation
- fix warning when freeing leaf after subvolume creation failure
- fix missing blkdev put in device scan error handling
- fix invalid delayed ref after subvolume creation failure"
* tag 'for-5.16-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix missing blkdev_put() call in btrfs_scan_one_device()
btrfs: fix warning when freeing leaf after subvolume creation failure
btrfs: fix invalid delayed ref after subvolume creation failure
btrfs: check WRITE_ERR when trying to read an extent buffer
btrfs: fix missing last dir item offset update when logging directory
btrfs: fix double free of anon_dev after failure to create subvolume
btrfs: fix memory leak in __add_inode_ref()
|
|
The function btrfs_scan_one_device() calls blkdev_get_by_path() and
blkdev_put() to get and release its target block device. However, when
btrfs_sb_log_location_bdev() fails, blkdev_put() is not called and the
block device is left without clean up. This triggered failure of fstests
generic/085. Fix the failure path of btrfs_sb_log_location_bdev() to
call blkdev_put().
Fixes: 12659251ca5df ("btrfs: implement log-structured superblock for ZONED mode")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When creating a subvolume, at ioctl.c:create_subvol(), if we fail to
insert the root item for the new subvolume into the root tree, we can
trigger the following warning:
[78961.741046] WARNING: CPU: 0 PID: 4079814 at fs/btrfs/extent-tree.c:3357 btrfs_free_tree_block+0x2af/0x310 [btrfs]
[78961.743344] Modules linked in:
[78961.749440] dm_snapshot dm_thin_pool (...)
[78961.773648] CPU: 0 PID: 4079814 Comm: fsstress Not tainted 5.16.0-rc4-btrfs-next-108 #1
[78961.775198] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[78961.777266] RIP: 0010:btrfs_free_tree_block+0x2af/0x310 [btrfs]
[78961.778398] Code: 17 00 48 85 (...)
[78961.781067] RSP: 0018:ffffaa4001657b28 EFLAGS: 00010202
[78961.781877] RAX: 0000000000000213 RBX: ffff897f8a796910 RCX: 0000000000000000
[78961.782780] RDX: 0000000000000000 RSI: 0000000011004000 RDI: 00000000ffffffff
[78961.783764] RBP: ffff8981f490e800 R08: 0000000000000001 R09: 0000000000000000
[78961.784740] R10: 0000000000000000 R11: 0000000000000001 R12: ffff897fc963fcc8
[78961.785665] R13: 0000000000000001 R14: ffff898063548000 R15: ffff898063548000
[78961.786620] FS: 00007f31283c6b80(0000) GS:ffff8982ace00000(0000) knlGS:0000000000000000
[78961.787717] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[78961.788598] CR2: 00007f31285c3000 CR3: 000000023fcc8003 CR4: 0000000000370ef0
[78961.789568] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[78961.790585] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[78961.791684] Call Trace:
[78961.792082] <TASK>
[78961.792359] create_subvol+0x5d1/0x9a0 [btrfs]
[78961.793054] btrfs_mksubvol+0x447/0x4c0 [btrfs]
[78961.794009] ? preempt_count_add+0x49/0xa0
[78961.794705] __btrfs_ioctl_snap_create+0x123/0x190 [btrfs]
[78961.795712] ? _copy_from_user+0x66/0xa0
[78961.796382] btrfs_ioctl_snap_create_v2+0xbb/0x140 [btrfs]
[78961.797392] btrfs_ioctl+0xd1e/0x35c0 [btrfs]
[78961.798172] ? __slab_free+0x10a/0x360
[78961.798820] ? rcu_read_lock_sched_held+0x12/0x60
[78961.799664] ? lock_release+0x223/0x4a0
[78961.800321] ? lock_acquired+0x19f/0x420
[78961.800992] ? rcu_read_lock_sched_held+0x12/0x60
[78961.801796] ? trace_hardirqs_on+0x1b/0xe0
[78961.802495] ? _raw_spin_unlock_irqrestore+0x3e/0x60
[78961.803358] ? kmem_cache_free+0x321/0x3c0
[78961.804071] ? __x64_sys_ioctl+0x83/0xb0
[78961.804711] __x64_sys_ioctl+0x83/0xb0
[78961.805348] do_syscall_64+0x3b/0xc0
[78961.805969] entry_SYSCALL_64_after_hwframe+0x44/0xae
[78961.806830] RIP: 0033:0x7f31284bc957
[78961.807517] Code: 3c 1c 48 f7 d8 (...)
This is because we are calling btrfs_free_tree_block() on an extent
buffer that is dirty. Fix that by cleaning the extent buffer, with
btrfs_clean_tree_block(), before freeing it.
This was triggered by test case generic/475 from fstests.
Fixes: 67addf29004c5b ("btrfs: fix metadata extent leak after failure to create subvolume")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When creating a subvolume, at ioctl.c:create_subvol(), if we fail to
insert the new root's root item into the root tree, we are freeing the
metadata extent we reserved for the new root to prevent a metadata
extent leak, as we don't abort the transaction at that point (since
there is nothing at that point that is irreversible).
However we allocated the metadata extent for the new root which we are
creating for the new subvolume, so its delayed reference refers to the
ID of this new root. But when we free the metadata extent we pass the
root of the subvolume where the new subvolume is located to
btrfs_free_tree_block() - this is incorrect because this will generate
a delayed reference that refers to the ID of the parent subvolume's root,
and not to ID of the new root.
This results in a failure when running delayed references that leads to
a transaction abort and a trace like the following:
[3868.738042] RIP: 0010:__btrfs_free_extent+0x709/0x950 [btrfs]
[3868.739857] Code: 68 0f 85 e6 fb ff (...)
[3868.742963] RSP: 0018:ffffb0e9045cf910 EFLAGS: 00010246
[3868.743908] RAX: 00000000fffffffe RBX: 00000000fffffffe RCX: 0000000000000002
[3868.745312] RDX: 00000000fffffffe RSI: 0000000000000002 RDI: ffff90b0cd793b88
[3868.746643] RBP: 000000000e5d8000 R08: 0000000000000000 R09: ffff90b0cd793b88
[3868.747979] R10: 0000000000000002 R11: 00014ded97944d68 R12: 0000000000000000
[3868.749373] R13: ffff90b09afe4a28 R14: 0000000000000000 R15: ffff90b0cd793b88
[3868.750725] FS: 00007f281c4a8b80(0000) GS:ffff90b3ada00000(0000) knlGS:0000000000000000
[3868.752275] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[3868.753515] CR2: 00007f281c6a5000 CR3: 0000000108a42006 CR4: 0000000000370ee0
[3868.754869] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[3868.756228] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[3868.757803] Call Trace:
[3868.758281] <TASK>
[3868.758655] ? btrfs_merge_delayed_refs+0x178/0x1c0 [btrfs]
[3868.759827] __btrfs_run_delayed_refs+0x2b1/0x1250 [btrfs]
[3868.761047] btrfs_run_delayed_refs+0x86/0x210 [btrfs]
[3868.762069] ? lock_acquired+0x19f/0x420
[3868.762829] btrfs_commit_transaction+0x69/0xb20 [btrfs]
[3868.763860] ? _raw_spin_unlock+0x29/0x40
[3868.764614] ? btrfs_block_rsv_release+0x1c2/0x1e0 [btrfs]
[3868.765870] create_subvol+0x1d8/0x9a0 [btrfs]
[3868.766766] btrfs_mksubvol+0x447/0x4c0 [btrfs]
[3868.767669] ? preempt_count_add+0x49/0xa0
[3868.768444] __btrfs_ioctl_snap_create+0x123/0x190 [btrfs]
[3868.769639] ? _copy_from_user+0x66/0xa0
[3868.770391] btrfs_ioctl_snap_create_v2+0xbb/0x140 [btrfs]
[3868.771495] btrfs_ioctl+0xd1e/0x35c0 [btrfs]
[3868.772364] ? __slab_free+0x10a/0x360
[3868.773198] ? rcu_read_lock_sched_held+0x12/0x60
[3868.774121] ? lock_release+0x223/0x4a0
[3868.774863] ? lock_acquired+0x19f/0x420
[3868.775634] ? rcu_read_lock_sched_held+0x12/0x60
[3868.776530] ? trace_hardirqs_on+0x1b/0xe0
[3868.777373] ? _raw_spin_unlock_irqrestore+0x3e/0x60
[3868.778280] ? kmem_cache_free+0x321/0x3c0
[3868.779011] ? __x64_sys_ioctl+0x83/0xb0
[3868.779718] __x64_sys_ioctl+0x83/0xb0
[3868.780387] do_syscall_64+0x3b/0xc0
[3868.781059] entry_SYSCALL_64_after_hwframe+0x44/0xae
[3868.781953] RIP: 0033:0x7f281c59e957
[3868.782585] Code: 3c 1c 48 f7 d8 4c (...)
[3868.785867] RSP: 002b:00007ffe1f83e2b8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[3868.787198] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f281c59e957
[3868.788450] RDX: 00007ffe1f83e2c0 RSI: 0000000050009418 RDI: 0000000000000003
[3868.789748] RBP: 00007ffe1f83f300 R08: 0000000000000000 R09: 00007ffe1f83fe36
[3868.791214] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000003
[3868.792468] R13: 0000000000000003 R14: 00007ffe1f83e2c0 R15: 00000000000003cc
[3868.793765] </TASK>
[3868.794037] irq event stamp: 0
[3868.794548] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[3868.795670] hardirqs last disabled at (0): [<ffffffff98294214>] copy_process+0x934/0x2040
[3868.797086] softirqs last enabled at (0): [<ffffffff98294214>] copy_process+0x934/0x2040
[3868.798309] softirqs last disabled at (0): [<0000000000000000>] 0x0
[3868.799284] ---[ end trace be24c7002fe27747 ]---
[3868.799928] BTRFS info (device dm-0): leaf 241188864 gen 1268 total ptrs 214 free space 469 owner 2
[3868.801133] BTRFS info (device dm-0): refs 2 lock_owner 225627 current 225627
[3868.802056] item 0 key (237436928 169 0) itemoff 16250 itemsize 33
[3868.802863] extent refs 1 gen 1265 flags 2
[3868.803447] ref#0: tree block backref root 1610
(...)
[3869.064354] item 114 key (241008640 169 0) itemoff 12488 itemsize 33
[3869.065421] extent refs 1 gen 1268 flags 2
[3869.066115] ref#0: tree block backref root 1689
(...)
[3869.403834] BTRFS error (device dm-0): unable to find ref byte nr 241008640 parent 0 root 1622 owner 0 offset 0
[3869.405641] BTRFS: error (device dm-0) in __btrfs_free_extent:3076: errno=-2 No such entry
[3869.407138] BTRFS: error (device dm-0) in btrfs_run_delayed_refs:2159: errno=-2 No such entry
Fix this by passing the new subvolume's root ID to btrfs_free_tree_block().
This requires changing the root argument of btrfs_free_tree_block() from
struct btrfs_root * to a u64, since at this point during the subvolume
creation we have not yet created the struct btrfs_root for the new
subvolume, and btrfs_free_tree_block() only needs a root ID and nothing
else from a struct btrfs_root.
This was triggered by test case generic/475 from fstests.
Fixes: 67addf29004c5b ("btrfs: fix metadata extent leak after failure to create subvolume")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Filipe reported a hang when we have errors on btrfs. This turned out to
be a side-effect of my fix c2e39305299f01 ("btrfs: clear extent buffer
uptodate when we fail to write it") which made it so we clear
EXTENT_BUFFER_UPTODATE on an eb when we fail to write it out.
Below is a paste of Filipe's analysis he got from using drgn to debug
the hang
"""
btree readahead code calls read_extent_buffer_pages(), sets ->io_pages to
a value while writeback of all pages has not yet completed:
--> writeback for the first 3 pages finishes, we clear
EXTENT_BUFFER_UPTODATE from eb on the first page when we get an
error.
--> at this point eb->io_pages is 1 and we cleared Uptodate bit from the
first 3 pages
--> read_extent_buffer_pages() does not see EXTENT_BUFFER_UPTODATE() so
it continues, it's able to lock the pages since we obviously don't
hold the pages locked during writeback
--> read_extent_buffer_pages() then computes 'num_reads' as 3, and sets
eb->io_pages to 3, since only the first page does not have Uptodate
bit set at this point
--> writeback for the remaining page completes, we ended decrementing
eb->io_pages by 1, resulting in eb->io_pages == 2, and therefore
never calling end_extent_buffer_writeback(), so
EXTENT_BUFFER_WRITEBACK remains in the eb's flags
--> of course, when the read bio completes, it doesn't and shouldn't
call end_extent_buffer_writeback()
--> we should clear EXTENT_BUFFER_UPTODATE only after all pages of
the eb finished writeback? or maybe make the read pages code
wait for writeback of all pages of the eb to complete before
checking which pages need to be read, touch ->io_pages, submit
read bio, etc
writeback bit never cleared means we can hang when aborting a
transaction, at:
btrfs_cleanup_one_transaction()
btrfs_destroy_marked_extents()
wait_on_extent_buffer_writeback()
"""
This is a problem because our writes are not synchronized with reads in
any way. We clear the UPTODATE flag and then we can easily come in and
try to read the EB while we're still waiting on other bio's to
complete.
We have two options here, we could lock all the pages, and then check to
see if eb->io_pages != 0 to know if we've already got an outstanding
write on the eb.
Or we can simply check to see if we have WRITE_ERR set on this extent
buffer. We set this bit _before_ we clear UPTODATE, so if the read gets
triggered because we aren't UPTODATE because of a write error we're
guaranteed to have WRITE_ERR set, and in this case we can simply return
-EIO. This will fix the reported hang.
Reported-by: Filipe Manana <fdmanana@suse.com>
Fixes: c2e39305299f01 ("btrfs: clear extent buffer uptodate when we fail to write it")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When logging a directory, once we finish processing a leaf that is full
of dir items, if we find the next leaf was not modified in the current
transaction, we grab the first key of that next leaf and log it as to
mark the end of a key range boundary.
However we did not update the value of ctx->last_dir_item_offset, which
tracks the offset of the last logged key. This can result in subsequent
logging of the same directory in the current transaction to not realize
that key was already logged, and then add it to the middle of a batch
that starts with a lower key, resulting later in a leaf with one key
that is duplicated and at non-consecutive slots. When that happens we get
an error later when writing out the leaf, reporting that there is a pair
of keys in wrong order. The report is something like the following:
Dec 13 21:44:50 kernel: BTRFS critical (device dm-0): corrupt leaf:
root=18446744073709551610 block=118444032 slot=21, bad key order, prev
(704687 84 4146773349) current (704687 84 1063561078)
Dec 13 21:44:50 kernel: BTRFS info (device dm-0): leaf 118444032 gen
91449 total ptrs 39 free space 546 owner 18446744073709551610
Dec 13 21:44:50 kernel: item 0 key (704687 1 0) itemoff 3835
itemsize 160
Dec 13 21:44:50 kernel: inode generation 35532 size
1026 mode 40755
Dec 13 21:44:50 kernel: item 1 key (704687 12 704685) itemoff
3822 itemsize 13
Dec 13 21:44:50 kernel: item 2 key (704687 24 3817753667)
itemoff 3736 itemsize 86
Dec 13 21:44:50 kernel: item 3 key (704687 60 0) itemoff 3728 itemsize 8
Dec 13 21:44:50 kernel: item 4 key (704687 72 0) itemoff 3720 itemsize 8
Dec 13 21:44:50 kernel: item 5 key (704687 84 140445108)
itemoff 3666 itemsize 54
Dec 13 21:44:50 kernel: dir oid 704793 type 1
Dec 13 21:44:50 kernel: item 6 key (704687 84 298800632)
itemoff 3599 itemsize 67
Dec 13 21:44:50 kernel: dir oid 707849 type 2
Dec 13 21:44:50 kernel: item 7 key (704687 84 476147658)
itemoff 3532 itemsize 67
Dec 13 21:44:50 kernel: dir oid 707901 type 2
Dec 13 21:44:50 kernel: item 8 key (704687 84 633818382)
itemoff 3471 itemsize 61
Dec 13 21:44:50 kernel: dir oid 704694 type 2
Dec 13 21:44:50 kernel: item 9 key (704687 84 654256665)
itemoff 3403 itemsize 68
Dec 13 21:44:50 kernel: dir oid 707841 type 1
Dec 13 21:44:50 kernel: item 10 key (704687 84 995843418)
itemoff 3331 itemsize 72
Dec 13 21:44:50 kernel: dir oid 2167736 type 1
Dec 13 21:44:50 kernel: item 11 key (704687 84 1063561078)
itemoff 3278 itemsize 53
Dec 13 21:44:50 kernel: dir oid 704799 type 2
Dec 13 21:44:50 kernel: item 12 key (704687 84 1101156010)
itemoff 3225 itemsize 53
Dec 13 21:44:50 kernel: dir oid 704696 type 1
Dec 13 21:44:50 kernel: item 13 key (704687 84 2521936574)
itemoff 3173 itemsize 52
Dec 13 21:44:50 kernel: dir oid 704704 type 2
Dec 13 21:44:50 kernel: item 14 key (704687 84 2618368432)
itemoff 3112 itemsize 61
Dec 13 21:44:50 kernel: dir oid 704738 type 1
Dec 13 21:44:50 kernel: item 15 key (704687 84 2676316190)
itemoff 3046 itemsize 66
Dec 13 21:44:50 kernel: dir oid 2167729 type 1
Dec 13 21:44:50 kernel: item 16 key (704687 84 3319104192)
itemoff 2986 itemsize 60
Dec 13 21:44:50 kernel: dir oid 704745 type 2
Dec 13 21:44:50 kernel: item 17 key (704687 84 3908046265)
itemoff 2929 itemsize 57
Dec 13 21:44:50 kernel: dir oid 2167734 type 1
Dec 13 21:44:50 kernel: item 18 key (704687 84 3945713089)
itemoff 2857 itemsize 72
Dec 13 21:44:50 kernel: dir oid 2167730 type 1
Dec 13 21:44:50 kernel: item 19 key (704687 84 4077169308)
itemoff 2795 itemsize 62
Dec 13 21:44:50 kernel: dir oid 704688 type 1
Dec 13 21:44:50 kernel: item 20 key (704687 84 4146773349)
itemoff 2727 itemsize 68
Dec 13 21:44:50 kernel: dir oid 707892 type 1
Dec 13 21:44:50 kernel: item 21 key (704687 84 1063561078)
itemoff 2674 itemsize 53
Dec 13 21:44:50 kernel: dir oid 704799 type 2
Dec 13 21:44:50 kernel: item 22 key (704687 96 2) itemoff 2612
itemsize 62
Dec 13 21:44:50 kernel: item 23 key (704687 96 6) itemoff 2551
itemsize 61
Dec 13 21:44:50 kernel: item 24 key (704687 96 7) itemoff 2498
itemsize 53
Dec 13 21:44:50 kernel: item 25 key (704687 96 12) itemoff
2446 itemsize 52
Dec 13 21:44:50 kernel: item 26 key (704687 96 14) itemoff
2385 itemsize 61
Dec 13 21:44:50 kernel: item 27 key (704687 96 18) itemoff
2325 itemsize 60
Dec 13 21:44:50 kernel: item 28 key (704687 96 24) itemoff
2271 itemsize 54
Dec 13 21:44:50 kernel: item 29 key (704687 96 28) itemoff
2218 itemsize 53
Dec 13 21:44:50 kernel: item 30 key (704687 96 62) itemoff
2150 itemsize 68
Dec 13 21:44:50 kernel: item 31 key (704687 96 66) itemoff
2083 itemsize 67
Dec 13 21:44:50 kernel: item 32 key (704687 96 75) itemoff
2015 itemsize 68
Dec 13 21:44:50 kernel: item 33 key (704687 96 79) itemoff
1948 itemsize 67
Dec 13 21:44:50 kernel: item 34 key (704687 96 82) itemoff
1882 itemsize 66
Dec 13 21:44:50 kernel: item 35 key (704687 96 83) itemoff
1810 itemsize 72
Dec 13 21:44:50 kernel: item 36 key (704687 96 85) itemoff
1753 itemsize 57
Dec 13 21:44:50 kernel: item 37 key (704687 96 87) itemoff
1681 itemsize 72
Dec 13 21:44:50 kernel: item 38 key (704694 1 0) itemoff 1521
itemsize 160
Dec 13 21:44:50 kernel: inode generation 35534 size 30
mode 40755
Dec 13 21:44:50 kernel: BTRFS error (device dm-0): block=118444032
write time tree block corruption detected
So fix that by adding the missing update of ctx->last_dir_item_offset with
the offset of the boundary key.
Reported-by: Chris Murphy <lists@colorremedies.com>
Link: https://lore.kernel.org/linux-btrfs/CAJCQCtT+RSzpUjbMq+UfzNUMe1X5+1G+DnAGbHC=OZ=iRS24jg@mail.gmail.com/
Fixes: dc2872247ec0ca ("btrfs: keep track of the last logged keys when logging a directory")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When creating a subvolume, at create_subvol(), we allocate an anonymous
device and later call btrfs_get_new_fs_root(), which in turn just calls
btrfs_get_root_ref(). There we call btrfs_init_fs_root() which assigns
the anonymous device to the root, but if after that call there's an error,
when we jump to 'fail' label, we call btrfs_put_root(), which frees the
anonymous device and then returns an error that is propagated back to
create_subvol(). Than create_subvol() frees the anonymous device again.
When this happens, if the anonymous device was not reallocated after
the first time it was freed with btrfs_put_root(), we get a kernel
message like the following:
(...)
[13950.282466] BTRFS: error (device dm-0) in create_subvol:663: errno=-5 IO failure
[13950.283027] ida_free called for id=65 which is not allocated.
[13950.285974] BTRFS info (device dm-0): forced readonly
(...)
If the anonymous device gets reallocated by another btrfs filesystem
or any other kernel subsystem, then bad things can happen.
So fix this by setting the root's anonymous device to 0 at
btrfs_get_root_ref(), before we call btrfs_put_root(), if an error
happened.
Fixes: 2dfb1e43f57dd3 ("btrfs: preallocate anon block device at first phase of snapshot creation")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Line 1169 (#3) allocates a memory chunk for victim_name by kmalloc(),
but when the function returns in line 1184 (#4) victim_name allocated
by line 1169 (#3) is not freed, which will lead to a memory leak.
There is a similar snippet of code in this function as allocating a memory
chunk for victim_name in line 1104 (#1) as well as releasing the memory
in line 1116 (#2).
We should kfree() victim_name when the return value of backref_in_log()
is less than zero and before the function returns in line 1184 (#4).
1057 static inline int __add_inode_ref(struct btrfs_trans_handle *trans,
1058 struct btrfs_root *root,
1059 struct btrfs_path *path,
1060 struct btrfs_root *log_root,
1061 struct btrfs_inode *dir,
1062 struct btrfs_inode *inode,
1063 u64 inode_objectid, u64 parent_objectid,
1064 u64 ref_index, char *name, int namelen,
1065 int *search_done)
1066 {
1104 victim_name = kmalloc(victim_name_len, GFP_NOFS);
// #1: kmalloc (victim_name-1)
1105 if (!victim_name)
1106 return -ENOMEM;
1112 ret = backref_in_log(log_root, &search_key,
1113 parent_objectid, victim_name,
1114 victim_name_len);
1115 if (ret < 0) {
1116 kfree(victim_name); // #2: kfree (victim_name-1)
1117 return ret;
1118 } else if (!ret) {
1169 victim_name = kmalloc(victim_name_len, GFP_NOFS);
// #3: kmalloc (victim_name-2)
1170 if (!victim_name)
1171 return -ENOMEM;
1180 ret = backref_in_log(log_root, &search_key,
1181 parent_objectid, victim_name,
1182 victim_name_len);
1183 if (ret < 0) {
1184 return ret; // #4: missing kfree (victim_name-2)
1185 } else if (!ret) {
1241 return 0;
1242 }
Fixes: d3316c8233bb ("btrfs: Properly handle backref_in_log retval")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more regression fixes and stable patches, mostly one-liners.
Regression fixes:
- fix pointer/ERR_PTR mismatch returned from memdup_user
- reset dedicated zoned mode relocation block group to avoid using it
and filling it without any recourse
Fixes:
- handle a case to FITRIM range (also to make fstests/generic/260
work)
- fix warning when extent buffer state and pages get out of sync
after an IO error
- fix transaction abort when syncing due to missing mapping error set
on metadata inode after inlining a compressed file
- fix transaction abort due to tree-log and zoned mode interacting in
an unexpected way
- fix memory leak of additional extent data when qgroup reservation
fails
- do proper handling of slot search call when deleting root refs"
* tag 'for-5.16-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: replace the BUG_ON in btrfs_del_root_ref with proper error handling
btrfs: zoned: clear data relocation bg on zone finish
btrfs: free exchange changeset on failures
btrfs: fix re-dirty process of tree-log nodes
btrfs: call mapping_set_error() on btree inode with a write error
btrfs: clear extent buffer uptodate when we fail to write it
btrfs: fail if fstrim_range->start == U64_MAX
btrfs: fix error pointer dereference in btrfs_ioctl_rm_dev_v2()
|
|
I hit the BUG_ON() with generic/475 test case, and to my surprise, all
callers of btrfs_del_root_ref() are already aborting transaction, thus
there is not need for such BUG_ON(), just go to @out label and caller
will properly handle the error.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When finishing a zone that is used by a dedicated data relocation
block group, also remove its reference from fs_info, so we're not trying
to use a full block group for allocations during data relocation, which
will always fail.
The result is we're not making any forward progress and end up in a
deadlock situation.
Fixes: c2707a255623 ("btrfs: zoned: add a dedicated data relocation block group")
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fstests runs on my VMs have show several kmemleak reports like the following.
unreferenced object 0xffff88811ae59080 (size 64):
comm "xfs_io", pid 12124, jiffies 4294987392 (age 6.368s)
hex dump (first 32 bytes):
00 c0 1c 00 00 00 00 00 ff cf 1c 00 00 00 00 00 ................
90 97 e5 1a 81 88 ff ff 90 97 e5 1a 81 88 ff ff ................
backtrace:
[<00000000ac0176d2>] ulist_add_merge+0x60/0x150 [btrfs]
[<0000000076e9f312>] set_state_bits+0x86/0xc0 [btrfs]
[<0000000014fe73d6>] set_extent_bit+0x270/0x690 [btrfs]
[<000000004f675208>] set_record_extent_bits+0x19/0x20 [btrfs]
[<00000000b96137b1>] qgroup_reserve_data+0x274/0x310 [btrfs]
[<0000000057e9dcbb>] btrfs_check_data_free_space+0x5c/0xa0 [btrfs]
[<0000000019c4511d>] btrfs_delalloc_reserve_space+0x1b/0xa0 [btrfs]
[<000000006d37e007>] btrfs_dio_iomap_begin+0x415/0x970 [btrfs]
[<00000000fb8a74b8>] iomap_iter+0x161/0x1e0
[<0000000071dff6ff>] __iomap_dio_rw+0x1df/0x700
[<000000002567ba53>] iomap_dio_rw+0x5/0x20
[<0000000072e555f8>] btrfs_file_write_iter+0x290/0x530 [btrfs]
[<000000005eb3d845>] new_sync_write+0x106/0x180
[<000000003fb505bf>] vfs_write+0x24d/0x2f0
[<000000009bb57d37>] __x64_sys_pwrite64+0x69/0xa0
[<000000003eba3fdf>] do_syscall_64+0x43/0x90
In case brtfs_qgroup_reserve_data() or btrfs_delalloc_reserve_metadata()
fail the allocated extent_changeset will not be freed.
So in btrfs_check_data_free_space() and btrfs_delalloc_reserve_space()
free the allocated extent_changeset to get rid of the allocated memory.
The issue currently only happens in the direct IO write path, but only
after 65b3c08606e5 ("btrfs: fix ENOSPC failure when attempting direct IO
write into NOCOW range"), and also at defrag_one_locked_target(). Every
other place is always calling extent_changeset_free() even if its call
to btrfs_delalloc_reserve_space() or btrfs_check_data_free_space() has
failed.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There is a report of a transaction abort of -EAGAIN with the following
script.
#!/bin/sh
for d in sda sdb; do
mkfs.btrfs -d single -m single -f /dev/\${d}
done
mount /dev/sda /mnt/test
mount /dev/sdb /mnt/scratch
for dir in test scratch; do
echo 3 >/proc/sys/vm/drop_caches
fio --directory=/mnt/\${dir} --name=fio.\${dir} --rw=read --size=50G --bs=64m \
--numjobs=$(nproc) --time_based --ramp_time=5 --runtime=480 \
--group_reporting |& tee /dev/shm/fio.\${dir}
echo 3 >/proc/sys/vm/drop_caches
done
for d in sda sdb; do
umount /dev/\${d}
done
The stack trace is shown in below.
[3310.967991] BTRFS: error (device sda) in btrfs_commit_transaction:2341: errno=-11 unknown (Error while writing out transaction)
[3310.968060] BTRFS info (device sda): forced readonly
[3310.968064] BTRFS warning (device sda): Skipping commit of aborted transaction.
[3310.968065] ------------[ cut here ]------------
[3310.968066] BTRFS: Transaction aborted (error -11)
[3310.968074] WARNING: CPU: 14 PID: 1684 at fs/btrfs/transaction.c:1946 btrfs_commit_transaction.cold+0x209/0x2c8
[3310.968131] CPU: 14 PID: 1684 Comm: fio Not tainted 5.14.10-300.fc35.x86_64 #1
[3310.968135] Hardware name: DIAWAY Tartu/Tartu, BIOS V2.01.B10 04/08/2021
[3310.968137] RIP: 0010:btrfs_commit_transaction.cold+0x209/0x2c8
[3310.968144] RSP: 0018:ffffb284ce393e10 EFLAGS: 00010282
[3310.968147] RAX: 0000000000000026 RBX: ffff973f147b0f60 RCX: 0000000000000027
[3310.968149] RDX: ffff974ecf098a08 RSI: 0000000000000001 RDI: ffff974ecf098a00
[3310.968150] RBP: ffff973f147b0f08 R08: 0000000000000000 R09: ffffb284ce393c48
[3310.968151] R10: ffffb284ce393c40 R11: ffffffff84f47468 R12: ffff973f101bfc00
[3310.968153] R13: ffff971f20cf2000 R14: 00000000fffffff5 R15: ffff973f147b0e58
[3310.968154] FS: 00007efe65468740(0000) GS:ffff974ecf080000(0000) knlGS:0000000000000000
[3310.968157] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[3310.968158] CR2: 000055691bcbe260 CR3: 000000105cfa4001 CR4: 0000000000770ee0
[3310.968160] PKRU: 55555554
[3310.968161] Call Trace:
[3310.968167] ? dput+0xd4/0x300
[3310.968174] btrfs_sync_file+0x3f1/0x490
[3310.968180] __x64_sys_fsync+0x33/0x60
[3310.968185] do_syscall_64+0x3b/0x90
[3310.968190] entry_SYSCALL_64_after_hwframe+0x44/0xae
[3310.968194] RIP: 0033:0x7efe6557329b
[3310.968200] RSP: 002b:00007ffe0236ebc0 EFLAGS: 00000293 ORIG_RAX: 000000000000004a
[3310.968203] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007efe6557329b
[3310.968204] RDX: 0000000000000000 RSI: 00007efe58d77010 RDI: 0000000000000006
[3310.968205] RBP: 0000000004000000 R08: 0000000000000000 R09: 00007efe58d77010
[3310.968207] R10: 0000000016cacc0c R11: 0000000000000293 R12: 00007efe5ce95980
[3310.968208] R13: 0000000000000000 R14: 00007efe6447c790 R15: 0000000c80000000
[3310.968212] ---[ end trace 1a346f4d3c0d96ba ]---
[3310.968214] BTRFS: error (device sda) in cleanup_transaction:1946: errno=-11 unknown
The abort occurs because of a write hole while writing out freeing tree
nodes of a tree-log tree. For zoned btrfs, we re-dirty a freed tree
node to ensure btrfs can write the region and does not leave a hole on
write on a zoned device. The current code fails to re-dirty a node
when the tree-log tree's depth is greater or equal to 2. That leads to
a transaction abort with -EAGAIN.
Fix the issue by properly re-dirtying a node on walking up the tree.
Fixes: d3575156f662 ("btrfs: zoned: redirty released extent buffers")
CC: stable@vger.kernel.org # 5.12+
Link: https://github.com/kdave/btrfs-progs/issues/415
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
generic/484 fails sometimes with compression on because the write ends
up small enough that it goes into the btree. This means that we never
call mapping_set_error() on the inode itself, because the page gets
marked as fine when we inline it into the metadata. When the metadata
writeback happens we see it and abort the transaction properly and mark
the fs as readonly, however we don't do the mapping_set_error() on
anything. In syncfs() we will simply return 0 if the sb is marked
read-only, so we can't check for this in our syncfs callback. The only
way the error gets returned if we called mapping_set_error() on
something. Fix this by calling mapping_set_error() on the btree inode
mapping. This allows us to properly return an error on syncfs and pass
generic/484 with compression on.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
