| Age | Commit message (Collapse) | Author |
|---|
|
The errors during removing a chunk item are fatal, we expect to have a
matching item in the chunk map from which the chunk_offset is taken.
Handle that by transaction abort.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The extent item used to have a v0 that was removed in 6.6. There's a
check for minimum expected size that could lead to
btrfs_handle_fs_error() that would make the filesystem read-only. As we
don't have v0 anymore (and haven't seen any reports in the deprecation
period), handle this in a less intrusive way.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When an extended ref is deleted we do a sanity check right before
removing the item, if we can't find it then handle the error. This is
done by btrfs_handle_fs_error() but this is from the time before we had
the transaction abort infrastructure, so switch to that. The end result
is the same, the error is reported and switched to read-only. We newly
return the -ENOENT error code as this better represents what happened.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We always allocate a delayed extent op structure when allocating a tree
block (except for log trees), but most of the time we don't need it as
we only need to set the BTRFS_BLOCK_FLAG_FULL_BACKREF if we're dealing
with a relocation tree and we only need to set the key of a tree block
in a btrfs_tree_block_info structure if we are not using skinny metadata
(feature enabled by default since btrfs-progs 3.18 and available as of
kernel 3.10).
In these cases, where we don't need neither to update flags nor to set
the key, we only use the delayed extent op structure to set the tree
block's level. This is a waste of memory and besides that, the memory
allocation can fail and can add additional latency.
Instead of using a delayed extent op structure to store the level of
the tree block, use the delayed ref head to store it. This doesn't
change the size of neither structure and helps us avoid allocating
delayed extent ops structures when using the skinny metadata feature
and there's no relocation going on. This also gets rid of a BUG_ON().
For example, for a fs_mark run, with 5 iterations, 8 threads and 100K
files per iteration, before this patch there were 118109 allocations
of delayed extent op structures and after it there were none.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When qgroups are enabled, during data reservation, we allocate the
ulist_nodes that track the exact reserved extents with GFP_ATOMIC
unconditionally. This is unnecessary, and we can follow the model
already employed by the struct extent_state we preallocate in the non
qgroups case, which should reduce the risk of allocation failures with
GFP_ATOMIC.
Add a prealloc node to struct ulist which ulist_add will grab when it is
present, and try to allocate it before taking the tree lock while we can
still take advantage of a less strict gfp mask. The lifetime of that
node belongs to the new prealloc field, until it is used, at which point
it belongs to the ulist linked list.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of doing a BUG_ON() handle the error by returning -EUCLEAN,
aborting the transaction and logging an error message.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of using an if-else statement when processing the extent item at
btrfs_lookup_extent_info(), use a single if statement for the error case
since it does a goto at the end and leave the success (expected) case
following the if statement, reducing indentation and making the logic a
bit easier to follow. Also make the if statement's condition as unlikely
since it's not expected to ever happen, as it signals some corruption,
making it clear and hint the compiler to generate more efficient code.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If we didn't found an extent item with the initial btrfs_search_slot()
call, it's pointless to test if the "metadata" variable is "true", because
right after we check if the key type is BTRFS_METADATA_ITEM_KEY and that
is the case only when "metadata" is set to "true". So remove the redundant
check.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of a BUG_ON() just return an error, log an error message and
abort the transaction in case we find an extent buffer belonging to the
relocation tree that doesn't have the full backref flag set. This is
unexpected and should never happen (save for bugs or a potential bad
memory).
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We keep a "new_flags" variable only to keep track if we need to update the
metadata extent's flags, and when we set BTRFS_BLOCK_FLAG_FULL_BACKREF in
the variable, we do it in an inner scope. Then check in an outer scope
if the variable is not 0 and if so call btrfs_set_disk_extent_flags().
The variable isn't used for anything else. This is somewhat confusing, so
to make it more straightforward update the extent's flags where we are
currently updating "new_flags" and remove the variable.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are no callers of btrfs_lookup_extent_info() that pass a NULL value
for the transaction handle argument, so there's no point in having special
logic to deal with the NULL. The last caller that passed a NULL value was
removed in commit 19b546d7a1b2 ("btrfs: relocation:
Use btrfs_find_all_leafs to locate data extent parent tree leaves").
So remove the NULL handling from btrfs_lookup_extent_info().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At btrfs_force_cow_block() we have several error paths that need to
unlock the "cow" extent buffer, drop the reference on it and then return
an error. This is a bit verbose so add a label where we perform these
tasks and make the error paths jump to that label.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When freeing a tree block, at btrfs_free_tree_block(), if we fail to
create a delayed reference we don't deal with the error and just do a
BUG_ON(). The error most likely to happen is -ENOMEM, and we have a
comment mentioning that only -ENOMEM can happen, but that is not true,
because in case qgroups are enabled any error returned from
btrfs_qgroup_trace_extent_post() (can be -EUCLEAN or anything returned
from btrfs_search_slot() for example) can be propagated back to
btrfs_free_tree_block().
So stop doing a BUG_ON() and return the error to the callers and make
them abort the transaction to prevent leaking space. Syzbot was
triggering this, likely due to memory allocation failure injection.
Reported-by: syzbot+a306f914b4d01b3958fe@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/000000000000fcba1e05e998263c@google.com/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
It's pointless to pass a super block argument to btrfs_iget_locked()
because we always pass a root and from it we can get the super block
through:
root->fs_info->sb
So remove the super block argument.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
It's pointless to pass a super block argument to btrfs_iget_path() because
we always pass a root and from it we can get the super block through:
root->fs_info->sb
So remove the super block argument.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
It's pointless to pass a super block argument to btrfs_iget() because we
always pass a root and from it we can get the super block through:
root->fs_info->sb
So remove the super block argument.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since commit 2b2553f12355 ("btrfs: stop setting PageError in the data I/O
path") btrfs no longer utilizes subpage error bitmaps anymore, but the
commit forgot to remove the error bitmap in btrfs_subpage_dump_bitmap(),
resulting in possible meaningless result for the error bitmap.
Fix it by just removing the error bitmap dumping.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Snapshot delete has some complicated looking code that is weirdly subtle
at times. I've cleaned it up the best I can without re-writing it, but
there are still a lot of details that are non-obvious. Add a bunch of
comments to the main parts of the code to help future developers better
understand the mechanics of snapshot deletion.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In walk_up_proc() we BUG_ON(ret) from btrfs_dec_ref(). This is
incorrect, we have proper error handling here, return the error.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In walk_up_proc() we have several sanity checks that should only trip if
the programmer made a mistake. Convert these to ASSERT()'s instead of
BUG_ON()'s.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In reada we BUG_ON(refs == 0), which could be unkind since we aren't
holding a lock on the extent leaf and thus could get a transient
incorrect answer. In walk_down_proc we also BUG_ON(refs == 0), which
could happen if we have extent tree corruption. Change that to return
-EUCLEAN. In do_walk_down() we catch this case and handle it correctly,
however we return -EIO, which -EUCLEAN is a more appropriate error code.
Finally in walk_up_proc we have the same BUG_ON(refs == 0), so convert
that to proper error handling. Also adjust the error message so we can
actually do something with the information.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have a couple of areas where we check to make sure the tree block is
locked before looking up or messing with references. This is old code
so it has this as BUG_ON(). Convert this to ASSERT() for developers.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have blanket BUG_ON(ret) after every one of these reference mod
attempts, which is just incorrect. If we encounter any errors during
walk_down_tree() we will abort, so abort on any one of these failures.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
walk_down_proc()
We handle errors here properly, ENOMEM isn't fatal, return the error.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is a big chunk of code in do_walk_down() that will conditionally
remove the reference for the child block we're currently evaluating.
Extract it out into it's own helper and call that from do_walk_down()
instead.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
snapshot delete
We currently duplicate the logic for walking into a node during snapshot
delete. In one case it is during the actual delete, and in the other we
use it for deciding if we should reada the block or not.
Factor this code into it's own helper and comment fully what we're
doing, and then update the two users to use the new helper.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We only set this if wc->refs[level - 1] > 1, and we check this way up
above where we need it because the first thing we do before dropping our
refs is reset wc->refs[level - 1] to 0. Reorder resetting of wc->refs
to after our drop logic, and then remove the need_account variable and
simply check wc->refs[level - 1] directly instead of using a variable.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
do_walk_down() already has a bunch of things going on, and there's a bit
of code related to reading in the next eb if we decide we need it. Move
this code off into it's own helper to clean up do_walk_down() a little
bit.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of using a flag we're passing around everywhere, add a field to
walk_control that we're already passing around everywhere and use that
instead.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently if our extent buffer isn't uptodate we will drop the lock,
free it, and then call read_tree_block() for the bytenr. This is
inefficient, we already have the extent buffer, we can simply call
btrfs_read_extent_buffer().
Merge these two cases down into one if statement, if we are not uptodate
we can drop the lock, trigger readahead, and do the read using
btrfs_read_extent_buffer(), and carry on.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently we have a handful of btrfs_check_eb_owner() calls in various
places and helpers that read extent buffers. However we call this in
the endio handler for every metadata block, so these extra checks are
unnecessary, simply remove them from everywhere except the endio
handler.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We do find_extent_buffer(), and then if we don't find the eb in cache we
call btrfs_find_create_tree_block(), which calls find_extent_buffer()
first and then allocates the extent buffer.
The reason we're doing this is because if we don't find the extent
buffer in cache we set reada = 1. However this doesn't matter, because
lower down we only trigger reada if !btrfs_buffer_uptodate(eb), which is
what the case would be if we didn't find the extent buffer in cache and
had to allocate it.
Clean this up to simply call btrfs_find_create_tree_block(), and then
use the fact that we're having to read the extent buffer off of disk to
go ahead and kick off readahead.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
As of commit 1b53e51a4a8f ("btrfs: don't commit transaction for every
subvol create") we started to make any fsync after creating a subvolume
to fallback to a transaction commit if the fsync is performed in the
same transaction that was used to create the subvolume. This happens
with the following at ioctl.c:create_subvol():
$ cat fs/btrfs/ioctl.c
(...)
/* Tree log can't currently deal with an inode which is a new root. */
btrfs_set_log_full_commit(trans);
(...)
Note that the comment is misleading as the problem is not that fsync can
not deal with the root inode of a new root, but that we can not log any
inode that belongs to a root that was not yet persisted because that would
make log replay fail since the root doesn't exist at log replay time.
The above simply makes any fsync fallback to a full transaction commit if
it happens in the same transaction used to create the subvolume - even if
it's an inode that belongs to any other subvolume. This is a brute force
solution and it doesn't necessarily improve performance for every workload
out there - it just moves a full transaction commit from one place, the
subvolume creation, to another - an fsync for any inode.
Just improve on this by making the fallback to a transaction commit only
for an fsync against an inode of the new subvolume, or for the directory
that contains the dentry that points to the new subvolume (in case anyone
attempts to fsync the directory in the same transaction).
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When creating and deleting a subvolume, after starting a transaction we
are explicitly calling btrfs_record_root_in_trans() for the root which we
passed to btrfs_start_transaction(). This is pointless because at
transaction.c:start_transaction() we end up doing that call, regardless
of whether we actually start a new transaction or join an existing one,
and if we were not it would mean the root item of that root would not
be updated in the root tree when committing the transaction, leading to
problems easy to spot with fstests for example.
Remove these redundant calls. They were introduced with commit
74e97958121a ("btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume
operations").
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
All parameters passed into setup_relocation_extent_mapping() can be
derived from 'struct reloc_control', so only pass in a 'struct
reloc_control'.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Pass a 'struct reloc_control' to prealloc_file_extent_cluster()
instead of passing its members 'data_inode' and 'cluster' on their own.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In describe_relocation() the fs_info is only needed for printing
information via btrfs_info() and can easily be accessed via the passed
in 'struct btrfs_block_group'.
So we can safely remove the fs_info parameter.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Pass a struct reloc_control to relocate_one_folio, instead of passing
it's members data_inode and cluster as separate arguments to the function.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of passing in a reloc_control's data_inode and
file_extent_cluster members, pass in the whole reloc_control structure.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Pass a 'struct reloc_control' to relocate_data_extent() instead of
it's data_inode and file_extent_cluster separately.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
During ordered extent splitting if we find a duplicated ordered extent
when attempting to insert the new ordered extent we panic but with a
message that has the "zoned:" prefix. This is because the splitting used
to be exclusive for zoned filesystems, but as of commit b73a6fd1b1ef
("btrfs: split partial dio bios before submit") it can also be done for
non zoned filesystems during direct IO writes. So remove the "zoned:"
prefix from the message and mention the split to make it more specific
and different from the panic message at insert_ordered_extent().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We never expect an ordered extent insertion to fail due to already having
another ordered extent in the tree for the same file offset, since we
always wait for existing ordered extents in a range to complete before
writing into the range again. So mark the failure checks for the results
of tree_insert() as unlikely, to make it clear it's never expected (save
exceptional causes like bugs or memory corruptions) and to serve as a hint
for the compiler to possibly generate better code.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At btrfs_split_ordered_extent(), we are removing and re-inserting the
ordered extent that we are trimming, but we don't need to since the
trimming doesn't change its position in the red black tree because we
don't have overlapping ordered extents (that would imply double allocation
of extents) and we know the split length is smaller than the ordered
extent's num_bytes field (we checked that early in the function).
So drop the remove and re-insert code for the slit ordered extent.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are subtle details about why the root's ordered_extent_lock is held,
so add a comment mentioning them.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At btrfs_wait_ordered_extents(), there's no point in updating the counters
after locking the root's ordered extent lock, as the counters are local.
So change this to update the counters before taking the lock.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At btrfs_wait_ordered_roots(), there's no point in decrementing the
counter after locking fs_info->ordered_root_lock as the counter is local.
So change this to decrement the counter before taking the lock.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can add const to many parameters, this is for clarity and minor
addition to safety. There are some minor effects, in the assembly
code and .ko measured on release config. This patch does not cover all
possible conversions.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There is already an error inside that header:
#if !defined(__LINUX_SPINLOCK_TYPES_H)
# error "Do not include directly, include spinlock_types.h"
#endif
Thankfully it never get triggered as some other headers have already
included spinlock_types.h.
However clangd would still do a proper warning on that if only
extent_map.h is opened.
Fix it by using spinlock_types.h instead.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have several headers that are including themselves, triggering clangd
warnings.
Such includes are caused by commit 602035d7fecf ("btrfs: add forward
declarations and headers, part 2").
Just remove such unnecessary include.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Generic slab works fine allocating btrfs_qgroup_extent_record
structures. It's not necessary to create a dedicated kmem cache that
would be created but unused if quotas were not enabled. Let's delete the
TODO line.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Junchao Sun <sunjunchao2870@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
