| Age | Commit message (Collapse) | Author |
|---|
|
Commit da52f8ade40b ("f2fs: get the right gc victim section when section
has several segments") added code to count blocks of each section using
variables with type 'unsigned short', which has 2 bytes size in many
systems. However, the counts can be larger than the 2 bytes range and
type conversion results in wrong values. Especially when the f2fs
sections have blocks as many as USHRT_MAX + 1, the count is handled as 0.
This triggers eternal loop in init_dirty_segmap() at mount system call.
Fix this by changing the type of the variables to block_t.
Fixes: da52f8ade40b ("f2fs: get the right gc victim section when section has several segments")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
intuitive
Current judgment condition of f2fs_bug_on in function update_sit_entry():
new_vblocks >> (sizeof(unsigned short) << 3) ||
new_vblocks > sbi->blocks_per_seg
which equivalents to:
new_vblocks < 0 || new_vblocks > sbi->blocks_per_seg
The latter is more intuitive.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reported-by: Jack Qiu <jack.qiu@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Added a new gc_urgent mode, GC_URGENT_LOW, in which mode
F2FS will lower the bar of checking idle in order to
process outstanding discard commands and GC a little bit
aggressively.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
to two independent functions:
- f2fs_allocate_new_segment() for specified type segment allocation
- f2fs_allocate_new_segments() for all data type segments allocation
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
When f2fs_ioc_gc_range performs multiple segments gc ops, the return
value of f2fs_ioc_gc_range is determined by the last segment gc ops.
If its ops failed, the f2fs_ioc_gc_range will be considered to be failed
despite some of previous segments gc ops succeeded. Therefore, so we
fix: Redefine the return value of getting victim ops and add exception
handle for f2fs_gc. In particular, 1).if target has no valid block, it
will go on. 2).if target sectoion has valid block(s), but it is current
section, we will reminder the caller.
Signed-off-by: Qilong Zhang <zhangqilong3@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Use validation of @fio to inidcate whether caller want to serialize IOs
in io.io_list or not, then @add_list will be redundant, remove it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
- to avoid race between checkpoint and quota file writeback, it
just needs to hold read lock of node_write in writeback path.
- node_write lock has covered all LFS data write paths, it's not
necessary, we only need to hold node_write lock at write path of
quota file.
This refactors commit ca7f76e68074 ("f2fs: fix wrong discard space").
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
to avoid polluting global symbol namespace.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Assume each section has 4 segment:
.___________________________.
|_Segment0_|_..._|_Segment3_|
. .
. .
.__________.
|_section0_|
Segment 0~2 has 0 valid block, segment 3 has 512 valid blocks.
It will fail if we want to gc section0 in this scenes,
because all 4 segments in section0 is not dirty.
So we should use dirty section bitmap instead of dirty segment bitmap
to get right victim section.
Signed-off-by: Jack Qiu <jack.qiu@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Under heavy fsstress, we may triggle panic while issuing discard,
because __check_sit_bitmap() detects that discard command may earse
valid data blocks, the root cause is as below race stack described,
since we removed lock when flushing quota data, quota data writeback
may race with write_checkpoint(), so that it causes inconsistency in
between cached discard entry and segment bitmap.
- f2fs_write_checkpoint
- block_operations
- set_sbi_flag(sbi, SBI_QUOTA_SKIP_FLUSH)
- f2fs_flush_sit_entries
- add_discard_addrs
- __set_bit_le(i, (void *)de->discard_map);
- f2fs_write_data_pages
- f2fs_write_single_data_page
: inode is quota one, cp_rwsem won't be locked
- f2fs_do_write_data_page
- f2fs_allocate_data_block
- f2fs_wait_discard_bio
: discard entry has not been added yet.
- update_sit_entry
- f2fs_clear_prefree_segments
- f2fs_issue_discard
: add discard entry
In order to fix this, this patch uses node_write to serialize
f2fs_allocate_data_block and checkpoint.
Fixes: 435cbab95e39 ("f2fs: fix quota_sync failure due to f2fs_lock_op")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
We never use return value of __insert_discard_tree(), so remove it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
When a discard_cmd needs to be split due to dpolicy->max_requests, then
for the remaining length it will be either merged into another cmd or a
new discard_cmd will be created. In this case, there is double
accounting of dcc->undiscard_blks for the remaining len, due to which
it shows incorrect value in stats.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In case a discard_cmd is split into several bios, the dc->error
must not be overwritten once an error is reported by a bio. Also,
move it under dc->lock.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
F2FS already has a default timeout of 5 secs for discards that
can be issued during umount, but it can take more than the 5 sec
timeout if the underlying UFS device queue is already full and there
are no more available free tags to be used. Fix this by submitting a
small batch of discard requests so that it won't cause the device
queue to be full at any time and thus doesn't incur its wait time
in the umount context.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
While checking discard timeout, we use specified type
UMOUNT_DISCARD_TIMEOUT, so just replace doplicy.timeout with
it, and switch doplicy.timeout to bool type.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Data flush can generate heavy IO and cause long latency during
flush, so it's not appropriate to trigger it in foreground
operation.
And also, we may face below potential deadlock during data flush:
- f2fs_write_multi_pages
- f2fs_write_raw_pages
- f2fs_write_single_data_page
- f2fs_balance_fs
- f2fs_balance_fs_bg
- f2fs_sync_dirty_inodes
- filemap_fdatawrite -- stuck on flush same cluster
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In order to avoid polluting global slab cache namespace.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
As Geert Uytterhoeven reported:
for parameter HZ/50 in congestion_wait(BLK_RW_ASYNC, HZ/50);
On some platforms, HZ can be less than 50, then unexpected 0 timeout
jiffies will be set in congestion_wait().
This patch introduces a macro DEFAULT_IO_TIMEOUT to wrap a determinate
value with msecs_to_jiffies(20) to instead HZ/50 to avoid such issue.
Quoted from Geert Uytterhoeven:
"A timeout of HZ means 1 second.
HZ/50 means 20 ms, but has the risk of being zero, if HZ < 50.
If you want to use a timeout of 20 ms, you best use msecs_to_jiffies(20),
as that takes care of the special cases, and never returns 0."
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch removes F2FS_MOUNT_ADAPTIVE and F2FS_MOUNT_LFS mount options,
and add F2FS_OPTION.fs_mode with below two status to indicate filesystem
mode.
enum {
FS_MODE_ADAPTIVE, /* use both lfs/ssr allocation */
FS_MODE_LFS, /* use lfs allocation only */
};
It can enhance code readability and fs mode's scalability.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Let's show mounted time.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Mutex lock won't serialize callers, in order to avoid starving of unlucky
caller, let's use rwsem lock instead.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Setting 0x40 in /sys/fs/f2fs/dev/ipu_policy gives a way to turn off
bio cache, which is useufl to check whether block layer using hardware
encryption engine merges IOs correctly.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Remove duplicate sbi->aw_cnt stats counter that tracks
the number of atomic files currently opened (it also shows
incorrect value sometimes). Use more relit lable sbi->atomic_files
to show in the stats.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
To catch f2fs bugs in write pointer handling code for zoned block
devices, check write pointers of non-open zones that current segments do
not point to. Do this check at mount time, after the fsync data recovery
and current segments' write pointer consistency fix. Or when fsync data
recovery is disabled by mount option, do the check when there is no fsync
data.
Check two items comparing write pointers with valid block maps in SIT.
The first item is check for zones with no valid blocks. When there is no
valid blocks in a zone, the write pointer should be at the start of the
zone. If not, next write operation to the zone will cause unaligned write
error. If write pointer is not at the zone start, reset the write pointer
to place at the zone start.
The second item is check between the write pointer position and the last
valid block in the zone. It is unexpected that the last valid block
position is beyond the write pointer. In such a case, report as a bug.
Fix is not required for such zone, because the zone is not selected for
next write operation until the zone get discarded.
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
On sudden f2fs shutdown, write pointers of zoned block devices can go
further but f2fs meta data keeps current segments at positions before the
write operations. After remounting the f2fs, this inconsistency causes
write operations not at write pointers and "Unaligned write command"
error is reported.
To avoid the error, compare current segments with write pointers of open
zones the current segments point to, during mount operation. If the write
pointer position is not aligned with the current segment position, assign
a new zone to the current segment. Also check the newly assigned zone has
write pointer at zone start. If not, reset write pointer of the zone.
Perform the consistency check during fsync recovery. Not to lose the
fsync data, do the check after fsync data gets restored and before
checkpoint commit which flushes data at current segment positions. Not to
cause conflict with kworker's dirfy data/node flush, do the fix within
SBI_POR_DOING protection.
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've introduced fairly small number of patches as below.
Enhancements:
- improve the in-place-update IO flow
- allocate segment to guarantee no GC for pinned files
Bug fixes:
- fix updatetime in lazytime mode
- potential memory leak in f2fs_listxattr
- record parent inode number in rename2 correctly
- fix deadlock in f2fs_gc along with atomic writes
- avoid needless data migration in GC"
* tag 'f2fs-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: stop GC when the victim becomes fully valid
f2fs: expose main_blkaddr in sysfs
f2fs: choose hardlimit when softlimit is larger than hardlimit in f2fs_statfs_project()
f2fs: Fix deadlock in f2fs_gc() context during atomic files handling
f2fs: show f2fs instance in printk_ratelimited
f2fs: fix potential overflow
f2fs: fix to update dir's i_pino during cross_rename
f2fs: support aligned pinned file
f2fs: avoid kernel panic on corruption test
f2fs: fix wrong description in document
f2fs: cache global IPU bio
f2fs: fix to avoid memory leakage in f2fs_listxattr
f2fs: check total_segments from devices in raw_super
f2fs: update multi-dev metadata in resize_fs
f2fs: mark recovery flag correctly in read_raw_super_block()
f2fs: fix to update time in lazytime mode
|
|
The FS got stuck in the below stack when the storage is almost
full/dirty condition (when FG_GC is being done).
schedule_timeout
io_schedule_timeout
congestion_wait
f2fs_drop_inmem_pages_all
f2fs_gc
f2fs_balance_fs
__write_node_page
f2fs_fsync_node_pages
f2fs_do_sync_file
f2fs_ioctl
The root cause for this issue is there is a potential infinite loop
in f2fs_drop_inmem_pages_all() for the case where gc_failure is true
and when there an inode whose i_gc_failures[GC_FAILURE_ATOMIC] is
not set. Fix this by keeping track of the total atomic files
currently opened and using that to exit from this condition.
Fix-suggested-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
As Eric mentioned, bare printk{,_ratelimited} won't show which
filesystem instance these message is coming from, this patch tries
to show fs instance with sb->s_id field in all places we missed
before.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch supports 2MB-aligned pinned file, which can guarantee no GC at all
by allocating fully valid 2MB segment.
Check free segments by has_not_enough_free_secs() with large budget.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Zoned block devices (ZBC and ZAC devices) allow an explicit control
over the condition (state) of zones. The operations allowed are:
* Open a zone: Transition to open condition to indicate that a zone will
actively be written
* Close a zone: Transition to closed condition to release the drive
resources used for writing to a zone
* Finish a zone: Transition an open or closed zone to the full
condition to prevent write operations
To enable this control for in-kernel zoned block device users, define
the new request operations REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE
and REQ_OP_ZONE_FINISH as well as the generic function
blkdev_zone_mgmt() for submitting these operations on a range of zones.
This results in blkdev_reset_zones() removal and replacement with this
new zone magement function. Users of blkdev_reset_zones() (f2fs and
dm-zoned) are updated accordingly.
Contains contributions from Matias Bjorling, Hans Holmberg,
Dmitry Fomichev, Keith Busch, Damien Le Moal and Christoph Hellwig.
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In commit 8648de2c581e ("f2fs: add bio cache for IPU"), we added
f2fs_submit_ipu_bio() in __write_data_page() as below:
__write_data_page()
if (!S_ISDIR(inode->i_mode) && !IS_NOQUOTA(inode)) {
f2fs_submit_ipu_bio(sbi, bio, page);
....
}
in order to avoid below deadlock:
Thread A Thread B
- __write_data_page (inode x, page y)
- f2fs_do_write_data_page
- set_page_writeback ---- set writeback flag in page y
- f2fs_inplace_write_data
- f2fs_balance_fs
- lock gc_mutex
- lock gc_mutex
- f2fs_gc
- do_garbage_collect
- gc_data_segment
- move_data_page
- f2fs_wait_on_page_writeback
- wait_on_page_writeback --- wait writeback of page y
However, the bio submission breaks the merge of IPU IOs.
So in this patch let's add a global bio cache for merged IPU pages,
then f2fs_wait_on_page_writeback() is able to submit bio if a
writebacked page is cached in global bio cache.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In f2fs_allocate_data_block(), we will reset fio.retry for IO
alignment feature instead of IO serialization feature.
In addition, spread F2FS_IO_ALIGNED() to check IO alignment
feature status explicitly.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
If committing atomic pages is failed when doing f2fs_do_sync_file(), we can
get commited pages but atomic_file being still set like:
- inmem: 0, atomic IO: 4 (Max. 10), volatile IO: 0 (Max. 0)
If GC selects this block, we can get an infinite loop like this:
f2fs_submit_page_bio: dev = (253,7), ino = 2, page_index = 0x2359a8, oldaddr = 0x2359a8, newaddr = 0x2359a8, rw = READ(), type = COLD_DATA
f2fs_submit_read_bio: dev = (253,7)/(253,7), rw = READ(), DATA, sector = 18533696, size = 4096
f2fs_get_victim: dev = (253,7), type = No TYPE, policy = (Foreground GC, LFS-mode, Greedy), victim = 4355, cost = 1, ofs_unit = 1, pre_victim_secno = 4355, prefree = 0, free = 234
f2fs_iget: dev = (253,7), ino = 6247, pino = 5845, i_mode = 0x81b0, i_size = 319488, i_nlink = 1, i_blocks = 624, i_advise = 0x2c
f2fs_submit_page_bio: dev = (253,7), ino = 2, page_index = 0x2359a8, oldaddr = 0x2359a8, newaddr = 0x2359a8, rw = READ(), type = COLD_DATA
f2fs_submit_read_bio: dev = (253,7)/(253,7), rw = READ(), DATA, sector = 18533696, size = 4096
f2fs_get_victim: dev = (253,7), type = No TYPE, policy = (Foreground GC, LFS-mode, Greedy), victim = 4355, cost = 1, ofs_unit = 1, pre_victim_secno = 4355, prefree = 0, free = 234
f2fs_iget: dev = (253,7), ino = 6247, pino = 5845, i_mode = 0x81b0, i_size = 319488, i_nlink = 1, i_blocks = 624, i_advise = 0x2c
In that moment, we can observe:
[Before]
Try to move 5084219 blocks (BG: 384508)
- data blocks : 4962373 (274483)
- node blocks : 121846 (110025)
Skipped : atomic write 4534686 (10)
[After]
Try to move 5088973 blocks (BG: 384508)
- data blocks : 4967127 (274483)
- node blocks : 121846 (110025)
Skipped : atomic write 4539440 (10)
So, refactor atomic_write flow like this:
1. start_atomic_write
- add inmem_list and set atomic_file
2. write()
- register it in inmem_pages
3. commit_atomic_write
- if no error, f2fs_drop_inmem_pages()
- f2fs_commit_inmme_pages() failed
: __revoked_inmem_pages() was done
- f2fs_do_sync_file failed
: abort_atomic_write later
4. abort_atomic_write
- f2fs_drop_inmem_pages
5. f2fs_drop_inmem_pages
- clear atomic_file
- remove inmem_list
Based on this change, when GC fails to move block in atomic_file,
f2fs_drop_inmem_pages_all() can call f2fs_drop_inmem_pages().
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch changes sematics of f2fs_is_checkpoint_ready()'s return
value as: return true when checkpoint is ready, other return false,
it can improve readability of below conditions.
f2fs_submit_page_write()
...
if (is_sbi_flag_set(sbi, SBI_IS_SHUTDOWN) ||
!f2fs_is_checkpoint_ready(sbi))
__submit_merged_bio(io);
f2fs_balance_fs()
...
if (!f2fs_is_checkpoint_ready(sbi))
return;
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Policy - Foreground GC, LFS and greedy GC mode.
Under this policy, f2fs_gc() loops forever to GC as it doesn't have
enough free segements to proceed and thus it keeps calling gc_more
for the same victim segment. This can happen if the selected victim
segment could not be GC'd due to failed blkaddr validity check i.e.
is_alive() returns false for the blocks set in current validity map.
Fix this by keeping track of such invalid segments and skip those
segments for selection in get_victim_by_default() to avoid endless
GC loop under such error scenarios. Currently, add this logic under
CONFIG_F2FS_CHECK_FS to be able to root cause the issue in debug
version.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix wrong bitmap size]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
build_sit_info() allocate all bitmaps for each segment one by one,
it's quite low efficiency, this pach changes to allocate large
continuous memory at a time, and divide it and assign for each bitmaps
of segment. For large size image, it can expect improving its mount
speed.
Signed-off-by: Chen Gong <gongchen4@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
There is one case can cause data corruption.
- write 4k to fileA
- fsync fileA, 4k data is writebacked to lbaA
- write 4k to fileA
- kworker flushs 4k to lbaB; dnode contain lbaB didn't be persisted yet
- write 4k to fileB
- kworker flush 4k to lbaA due to SSR
- SPOR -> dnode with lbaA will be recovered, however lbaA contains fileB's
data
One solution is tracking all fsynced file's block history, and disallow
SSR overwrite on newly invalidated block on that file.
However, during recovery, no matter the dnode is flushed or fsynced, all
previous dnodes until last fsynced one in node chain can be recovered,
that means we need to record all block change in flushed dnode, which
will cause heavy cost, so let's just use simple fix by forbidding SSR
overwrite directly.
Fixes: 5b6c6be2d878 ("f2fs: use SSR for warm node as well")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
As Pavel Machek reported:
"We normally use -EUCLEAN to signal filesystem corruption. Plus, it is
good idea to report it to the syslog and mark filesystem as "needing
fsck" if filesystem can do that."
Still we need improve the original patch with:
- use unlikely keyword
- add message print
- return EUCLEAN
However, after rethink this patch, I don't think we should add such
condition check here as below reasons:
- We have already checked the field in f2fs_sanity_check_ckpt(),
- If there is fs corrupt or security vulnerability, there is nothing
to guarantee the field is integrated after the check, unless we do
the check before each of its use, however no filesystem does that.
- We only have similar check for bitmap, which was added due to there
is bitmap corruption happened on f2fs' runtime in product.
- There are so many key fields in SB/CP/NAT did have such check
after f2fs_sanity_check_{sb,cp,..}.
So I propose to revert this unneeded check.
This reverts commit 56f3ce675103e3fb9e631cfb4131fc768bc23e9a.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
We do not need to set the SBI_NEED_FSCK flag in the error paths, if we
return error here, we will not update the checkpoint flag, so the code
is useless, just remove it.
Signed-off-by: Lihong Kou <koulihong@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
=============================================================================
BUG discard_cmd (Tainted: G B OE ): Objects remaining in discard_cmd on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
INFO: Slab 0xffffe1ac481d22c0 objects=36 used=2 fp=0xffff936b4748bf50 flags=0x2ffff0000000100
Call Trace:
dump_stack+0x63/0x87
slab_err+0xa1/0xb0
__kmem_cache_shutdown+0x183/0x390
shutdown_cache+0x14/0x110
kmem_cache_destroy+0x195/0x1c0
f2fs_destroy_segment_manager_caches+0x21/0x40 [f2fs]
exit_f2fs_fs+0x35/0x641 [f2fs]
SyS_delete_module+0x155/0x230
? vtime_user_exit+0x29/0x70
do_syscall_64+0x6e/0x160
entry_SYSCALL64_slow_path+0x25/0x25
INFO: Object 0xffff936b4748b000 @offset=0
INFO: Object 0xffff936b4748b070 @offset=112
kmem_cache_destroy discard_cmd: Slab cache still has objects
Call Trace:
dump_stack+0x63/0x87
kmem_cache_destroy+0x1b4/0x1c0
f2fs_destroy_segment_manager_caches+0x21/0x40 [f2fs]
exit_f2fs_fs+0x35/0x641 [f2fs]
SyS_delete_module+0x155/0x230
do_syscall_64+0x6e/0x160
entry_SYSCALL64_slow_path+0x25/0x25
Recovery can cache discard commands, so in error path of fill_super(),
we need give a chance to handle them, otherwise it will lead to leak
of discard_cmd slab cache.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
blkoff_off might over 512 due to fs corrupt or security
vulnerability. That should be checked before being using.
Use ENTRIES_IN_SUM to protect invalid value in cur_data_blkoff.
Signed-off-by: Ocean Chen <oceanchen@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In umount, we give an constand time to handle pending discard, previously,
in __issue_discard_cmd() we missed to check timeout condition in loop,
result in delaying long time, fix it.
Signed-off-by: Heng Xiao <heng.xiao@unisoc.com>
[Chao Yu: add commit message]
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
f2fs uses EFAULT as error number to indicate filesystem is corrupted
all the time, but generic filesystems use EUCLEAN for such condition,
we need to change to follow others.
This patch adds two new macros as below to wrap more generic error
code macros, and spread them in code.
EFSBADCRC EBADMSG /* Bad CRC detected */
EFSCORRUPTED EUCLEAN /* Filesystem is corrupted */
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
As Pavel reported, once we detect filesystem inconsistency in
f2fs_inplace_write_data(), it will be better to print kernel message as
we did in other places.
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
- Add and use f2fs_<level> macros
- Convert f2fs_msg to f2fs_printk
- Remove level from f2fs_printk and embed the level in the format
- Coalesce formats and align multi-line arguments
- Remove unnecessary duplicate extern f2fs_msg f2fs.h
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This ioctl shrinks a given length (aligned to sections) from end of the
main area. Any cursegs and valid blocks will be moved out before
invalidating the range.
This feature can be used for adjusting partition sizes online.
History of the patch:
Sahitya Tummala:
- Add this ioctl for f2fs_compat_ioctl() as well.
- Fix debugfs status to reflect the online resize changes.
- Fix potential race between online resize path and allocate new data
block path or gc path.
Others:
- Rename some identifiers.
- Add some error handling branches.
- Clear sbi->next_victim_seg[BG_GC/FG_GC] in shrinking range.
- Implement this interface as ext4's, and change the parameter from shrunk
bytes to new block count of F2FS.
- During resizing, force to empty sit_journal and forbid adding new
entries to it, in order to avoid invalid segno in journal after resize.
- Reduce sbi->user_block_count before resize starts.
- Commit the updated superblock first, and then update in-memory metadata
only when the former succeeds.
- Target block count must align to sections.
- Write checkpoint before and after committing the new superblock, w/o
CP_FSCK_FLAG respectively, so that the FS can be fixed by fsck even if
resize fails after the new superblock is committed.
- In free_segment_range(), reduce granularity of gc_mutex.
- Add protection on curseg migration.
- Add freeze_bdev() and thaw_bdev() for resize fs.
- Remove CUR_MAIN_SECS and use MAIN_SECS directly for allocation.
- Recover super_block and FS metadata when resize fails.
- No need to clear CP_FSCK_FLAG in update_ckpt_flags().
- Clean up the sb and fs metadata update functions for resize_fs.
Geert Uytterhoeven:
- Use div_u64*() for 64-bit divisions
Arnd Bergmann:
- Not all architectures support get_user() with a 64-bit argument:
ERROR: "__get_user_bad" [fs/f2fs/f2fs.ko] undefined!
Use copy_from_user() here, this will always work.
Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This extends the checkpoint option to allow checkpoint=disable:%u[%]
This allows you to specify what how much of the disk you are willing
to lose access to while mounting with checkpoint=disable. If the amount
lost would be higher, the mount will return -EAGAIN. This can be given
as a percent of total space, or in blocks.
Currently, we need to run garbage collection until the amount of holes
is smaller than the OVP space. With the new option, f2fs can mark
space as unusable up front instead of requiring garbage collection until
the number of holes is small enough.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The existing threshold for allowable holes at checkpoint=disable time is
too high. The OVP space contains reserved segments, which are always in
the form of free segments. These must be subtracted from the OVP value.
The current threshold is meant to be the maximum value of holes of a
single type we can have and still guarantee that we can fill the disk
without failing to find space for a block of a given type.
If the disk is full, ignoring current reserved, which only helps us,
the amount of unused blocks is equal to the OVP area. Of that, there
are reserved segments, which must be free segments, and the rest of the
ovp area, which can come from either free segments or holes. The maximum
possible amount of holes is OVP-reserved.
Now, consider the disk when mounting with checkpoint=disable.
We must be able to fill all available free space with either data or
node blocks. When we start with checkpoint=disable, holes are locked to
their current type. Say we have H of one type of hole, and H+X of the
other. We can fill H of that space with arbitrary typed blocks via SSR.
For the remaining H+X blocks, we may not have any of a given block type
left at all. For instance, if we were to fill the disk entirely with
blocks of the type with fewer holes, the H+X blocks of the opposite type
would not be used. If H+X > OVP-reserved, there would be more holes than
could possibly exist, and we would have failed to find a suitable block
earlier on, leading to a crash in update_sit_entry.
If H+X <= OVP-reserved, then the holes end up effectively masked by the OVP
region in this case.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Add error prints to get more details on the mount failure.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
