| Age | Commit message (Collapse) | Author |
|---|
|
It's been reported that doing stress test for module insertion and
removal can result in an ENOENT from libkmod for a valid module.
In kernfs_iop_lookup() a negative dentry is created if there's no kernfs
node associated with the dentry or the node is inactive.
But inactive kernfs nodes are meant to be invisible to the VFS and
creating a negative dentry for these can have unexpected side effects
when the node transitions to an active state.
The point of creating negative dentries is to avoid the expensive
alloc/free cycle that occurs if there are frequent lookups for kernfs
attributes that don't exist. So kernfs nodes that are not yet active
should not result in a negative dentry being created so when they
transition to an active state VFS lookups can create an associated
dentry is a natural way.
It's also been reported that https://github.com/osandov/blktests.git
test block/001 hangs during the test. It was suggested that recent
changes to blktests might have caused it but applying this patch
resolved the problem without change to blktests.
Fixes: c7e7c04274b1 ("kernfs: use VFS negative dentry caching")
Tested-by: Yi Zhang <yi.zhang@redhat.com>
ACKed-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ian Kent <raven@themaw.net>
Link: https://lore.kernel.org/r/163330943316.19450.15056895533949392922.stgit@mickey.themaw.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A KMSAN warning is reported by Alexander Potapenko:
BUG: KMSAN: uninit-value in kernfs_dop_revalidate+0x61f/0x840
fs/kernfs/dir.c:1053
kernfs_dop_revalidate+0x61f/0x840 fs/kernfs/dir.c:1053
d_revalidate fs/namei.c:854
lookup_dcache fs/namei.c:1522
__lookup_hash+0x3a6/0x590 fs/namei.c:1543
filename_create+0x312/0x7c0 fs/namei.c:3657
do_mkdirat+0x103/0x930 fs/namei.c:3900
__do_sys_mkdir fs/namei.c:3931
__se_sys_mkdir fs/namei.c:3929
__x64_sys_mkdir+0xda/0x120 fs/namei.c:3929
do_syscall_x64 arch/x86/entry/common.c:51
It seems a positive dentry in kernfs becomes a negative dentry directly
through d_delete() in vfs_rmdir(). dentry->d_time is uninitialized
when accessing it in kernfs_dop_revalidate(), because it is only
initialized when created as negative dentry in kernfs_iop_lookup().
The problem can be reproduced by the following command:
cd /sys/fs/cgroup/pids && mkdir hi && stat hi && rmdir hi && stat hi
A simple fixes seems to be initializing d->d_time for positive dentry
in kernfs_iop_lookup() as well. The downside is the negative dentry
will be revalidated again after it becomes negative in d_delete(),
because the revison of its parent must have been increased due to
its removal.
Alternative solution is implement .d_iput for kernfs, and assign d_time
for the newly-generated negative dentry in it. But we may need to
take kernfs_rwsem to protect again the concurrent kernfs_link_sibling()
on the parent directory, it is a little over-killing. Now the simple
fix is chosen.
Link: https://marc.info/?l=linux-fsdevel&m=163249838610499
Fixes: c7e7c04274b1 ("kernfs: use VFS negative dentry caching")
Reported-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20210928140750.1274441-1-houtao1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The call to d_splice_alias() in kernfs_iop_lookup() doesn't depend on
any kernfs node so there's no reason to hold the kernfs node lock when
calling it.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Link: https://lore.kernel.org/r/162642772000.63632.10672683419693513226.stgit@web.messagingengine.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The inode operations .permission() and .getattr() use the kernfs node
write lock but all that's needed is the read lock to protect against
partial updates of these kernfs node fields which are all done under
the write lock.
And .permission() is called frequently during path walks and can cause
quite a bit of contention between kernfs node operations and path
walks when the number of concurrent walks is high.
To change kernfs_iop_getattr() and kernfs_iop_permission() to take
the rw sem read lock instead of the write lock an additional lock is
needed to protect against multiple processes concurrently updating
the inode attributes and link count in kernfs_refresh_inode().
The inode i_lock seems like the sensible thing to use to protect these
inode attribute updates so use it in kernfs_refresh_inode().
The last hunk in the patch, applied to kernfs_fill_super(), is possibly
not needed but taking the lock was present originally. I prefer to
continue to take it to protect against a partial update of the source
kernfs fields during the call to kernfs_refresh_inode() made by
kernfs_get_inode().
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Link: https://lore.kernel.org/r/162642771474.63632.16295959115893904470.stgit@web.messagingengine.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The kernfs global lock restricts the ability to perform kernfs node
lookup operations in parallel during path walks.
Change the kernfs mutex to an rwsem so that, when opportunity arises,
node searches can be done in parallel with path walk lookups.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Link: https://lore.kernel.org/r/162642770946.63632.2218304587223241374.stgit@web.messagingengine.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If there are many lookups for non-existent paths these negative lookups
can lead to a lot of overhead during path walks.
The VFS allows dentries to be created as negative and hashed, and caches
them so they can be used to reduce the fairly high overhead alloc/free
cycle that occurs during these lookups.
Use the kernfs node parent revision to identify if a change has been
made to the containing directory so that the negative dentry can be
discarded and the lookup redone.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Link: https://lore.kernel.org/r/162642770420.63632.15791924970508867106.stgit@web.messagingengine.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a revision counter to kernfs directory nodes so it can be used
to detect if a directory node has changed during negative dentry
revalidation.
There's an assumption that sizeof(unsigned long) <= sizeof(pointer)
on all architectures and as far as I know that assumption holds.
So adding a revision counter to the struct kernfs_elem_dir variant of
the kernfs_node type union won't increase the size of the kernfs_node
struct. This is because struct kernfs_elem_dir is at least
sizeof(pointer) smaller than the largest union variant. It's tempting
to make the revision counter a u64 but that would increase the size of
kernfs_node on archs where sizeof(pointer) is smaller than the revision
counter.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Link: https://lore.kernel.org/r/162642769895.63632.8356662784964509867.stgit@web.messagingengine.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core changes from Greg KH:
"Here is the small set of driver core and debugfs updates for 5.14-rc1.
Included in here are:
- debugfs api cleanups (touched some drivers)
- devres updates
- tiny driver core updates and tweaks
Nothing major in here at all, and all have been in linux-next for a
while with no reported issues"
* tag 'driver-core-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits)
docs: ABI: testing: sysfs-firmware-memmap: add some memmap types.
devres: Enable trace events
devres: No need to call remove_nodes() when there none present
devres: Use list_for_each_safe_from() in remove_nodes()
devres: Make locking straight forward in release_nodes()
kernfs: move revalidate to be near lookup
drivers/base: Constify static attribute_group structs
firmware_loader: remove unneeded 'comma' macro
devcoredump: remove contact information
driver core: Drop helper devm_platform_ioremap_resource_wc()
component: Rename 'dev' to 'parent'
component: Drop 'dev' argument to component_match_realloc()
device property: Don't check for NULL twice in the loops
driver core: auxiliary bus: Fix typo in the docs
drivers/base/node.c: make CACHE_ATTR define static DEVICE_ATTR_RO
debugfs: remove return value of debugfs_create_ulong()
debugfs: remove return value of debugfs_create_bool()
scsi: snic: debugfs: remove local storage of debugfs files
b43: don't save dentries for debugfs
b43legacy: don't save dentries for debugfs
...
|
|
Move the ramfs aops to libfs and reuse them for kernfs and configfs.
Thosw two did not wire up ->set_page_dirty before and now get
__set_page_dirty_no_writeback, which is the right one for no-writeback
address_space usage.
Drop the now unused exports of the libfs helpers only used for ramfs-style
pagecache usage.
Link: https://lkml.kernel.org/r/20210614061512.3966143-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
While the dentry operation kernfs_dop_revalidate() is grouped with
dentry type functions it also has a strong affinity to the inode
operation ->lookup().
It makes sense to locate this function near to kernfs_iop_lookup()
because we will be adding VFS negative dentry caching to reduce path
lookup overhead for non-existent paths.
There's no functional change from this patch.
Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/162375275365.232295.8995526416263659926.stgit@web.messagingengine.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf
https://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
https://git.kernel.org/brauner/man-pages/c/1d7b902e2875a1ff342e036a9f866a995640aea8
In order to support idmapped mounts, filesystems need to be changed
and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
patches to convert individual filesystem are not very large or
complicated overall as can be seen from the included fat, ext4, and
xfs ports. Patches for other filesystems are actively worked on and
will be sent out separately. The xfstestsuite can be used to verify
that port has been done correctly.
The mount_setattr() syscall is motivated independent of the idmapped
mounts patches and it's been around since July 2019. One of the most
valuable features of the new mount api is the ability to perform
mounts based on file descriptors only.
Together with the lookup restrictions available in the openat2()
RESOLVE_* flag namespace which we added in v5.6 this is the first time
we are close to hardened and race-free (e.g. symlinks) mounting and
path resolution.
While userspace has started porting to the new mount api to mount
proper filesystems and create new bind-mounts it is currently not
possible to change mount options of an already existing bind mount in
the new mount api since the mount_setattr() syscall is missing.
With the addition of the mount_setattr() syscall we remove this last
restriction and userspace can now fully port to the new mount api,
covering every use-case the old mount api could. We also add the
crucial ability to recursively change mount options for a whole mount
tree, both removing and adding mount options at the same time. This
syscall has been requested multiple times by various people and
projects.
There is a simple tool available at
https://github.com/brauner/mount-idmapped
that allows to create idmapped mounts so people can play with this
patch series. I'll add support for the regular mount binary should you
decide to pull this in the following weeks:
Here's an example to a simple idmapped mount of another user's home
directory:
u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt
u1001@f2-vm:/$ ls -al /home/ubuntu/
total 28
drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
drwxr-xr-x 4 root root 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ ls -al /mnt/
total 28
drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 .
drwxr-xr-x 29 root root 4096 Oct 28 22:01 ..
-rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile
-rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ touch /mnt/my-file
u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file
u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file
u1001@f2-vm:/$ ls -al /mnt/my-file
-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file
u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file
u1001@f2-vm:/$ getfacl /mnt/my-file
getfacl: Removing leading '/' from absolute path names
# file: mnt/my-file
# owner: u1001
# group: u1001
user::rw-
user:u1001:rwx
group::rw-
mask::rwx
other::r--
u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
getfacl: Removing leading '/' from absolute path names
# file: home/ubuntu/my-file
# owner: ubuntu
# group: ubuntu
user::rw-
user:ubuntu:rwx
group::rw-
mask::rwx
other::r--"
* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
xfs: support idmapped mounts
ext4: support idmapped mounts
fat: handle idmapped mounts
tests: add mount_setattr() selftests
fs: introduce MOUNT_ATTR_IDMAP
fs: add mount_setattr()
fs: add attr_flags_to_mnt_flags helper
fs: split out functions to hold writers
namespace: only take read lock in do_reconfigure_mnt()
mount: make {lock,unlock}_mount_hash() static
namespace: take lock_mount_hash() directly when changing flags
nfs: do not export idmapped mounts
overlayfs: do not mount on top of idmapped mounts
ecryptfs: do not mount on top of idmapped mounts
ima: handle idmapped mounts
apparmor: handle idmapped mounts
fs: make helpers idmap mount aware
exec: handle idmapped mounts
would_dump: handle idmapped mounts
...
|
|
Extend some inode methods with an additional user namespace argument. A
filesystem that is aware of idmapped mounts will receive the user
namespace the mount has been marked with. This can be used for
additional permission checking and also to enable filesystems to
translate between uids and gids if they need to. We have implemented all
relevant helpers in earlier patches.
As requested we simply extend the exisiting inode method instead of
introducing new ones. This is a little more code churn but it's mostly
mechanical and doesnt't leave us with additional inode methods.
Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
The generic_fillattr() helper fills in the basic attributes associated
with an inode. Enable it to handle idmapped mounts. If the inode is
accessed through an idmapped mount map it into the mount's user
namespace before we store the uid and gid. If the initial user namespace
is passed nothing changes so non-idmapped mounts will see identical
behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-12-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
The posix acl permission checking helpers determine whether a caller is
privileged over an inode according to the acls associated with the
inode. Add helpers that make it possible to handle acls on idmapped
mounts.
The vfs and the filesystems targeted by this first iteration make use of
posix_acl_fix_xattr_from_user() and posix_acl_fix_xattr_to_user() to
translate basic posix access and default permissions such as the
ACL_USER and ACL_GROUP type according to the initial user namespace (or
the superblock's user namespace) to and from the caller's current user
namespace. Adapt these two helpers to handle idmapped mounts whereby we
either map from or into the mount's user namespace depending on in which
direction we're translating.
Similarly, cap_convert_nscap() is used by the vfs to translate user
namespace and non-user namespace aware filesystem capabilities from the
superblock's user namespace to the caller's user namespace. Enable it to
handle idmapped mounts by accounting for the mount's user namespace.
In addition the fileystems targeted in the first iteration of this patch
series make use of the posix_acl_chmod() and, posix_acl_update_mode()
helpers. Both helpers perform permission checks on the target inode. Let
them handle idmapped mounts. These two helpers are called when posix
acls are set by the respective filesystems to handle this case we extend
the ->set() method to take an additional user namespace argument to pass
the mount's user namespace down.
Link: https://lore.kernel.org/r/20210121131959.646623-9-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
When file attributes are changed most filesystems rely on the
setattr_prepare(), setattr_copy(), and notify_change() helpers for
initialization and permission checking. Let them handle idmapped mounts.
If the inode is accessed through an idmapped mount map it into the
mount's user namespace. Afterwards the checks are identical to
non-idmapped mounts. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.
Helpers that perform checks on the ia_uid and ia_gid fields in struct
iattr assume that ia_uid and ia_gid are intended values and have already
been mapped correctly at the userspace-kernelspace boundary as we
already do today. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
The two helpers inode_permission() and generic_permission() are used by
the vfs to perform basic permission checking by verifying that the
caller is privileged over an inode. In order to handle idmapped mounts
we extend the two helpers with an additional user namespace argument.
On idmapped mounts the two helpers will make sure to map the inode
according to the mount's user namespace and then peform identical
permission checks to inode_permission() and generic_permission(). If the
initial user namespace is passed nothing changes so non-idmapped mounts
will see identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-6-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Wire up the splice_read and splice_write methods to the default
helpers using ->read_iter and ->write_iter now that those are
implemented for kernfs. This restores support to use splice and
sendfile on kernfs files.
Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops")
Reported-by: Siddharth Gupta <sidgup@codeaurora.org>
Tested-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210120204631.274206-4-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Switch kernfs to implement the write_iter method instead of plain old
write to prepare to supporting splice and sendfile again.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210120204631.274206-3-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Switch kernfs to implement the read_iter method instead of plain old
read to prepare to supporting splice and sendfile again.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210120204631.274206-2-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In both kernfs_node_from_dentry() and in
kernfs_dentry_node(), we will check the dentry->inode
is NULL or not, which is superfluous.
So remove the check in kernfs_node_from_dentry().
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hui Su <sh_def@163.com>
Link: https://lore.kernel.org/r/20201113132143.GA119541@rlk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix two stragglers in the comments of the below rename operation.
Fixes: adc5e8b58f48 ("kernfs: drop s_ prefix from kernfs_node members")
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20201015185726.1386868-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The arguments of fsnotify() are overloaded and mean different things
for different event types.
Replace the to_tell argument with separate arguments @dir and @inode,
because we may be sending to both dir and child. Using the @data
argument to pass the child is not enough, because dirent events pass
this argument (for audit), but we do not report to child.
Document the new fsnotify() function argumenets.
Link: https://lore.kernel.org/r/20200722125849.17418-7-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Simple helper to consolidate biolerplate code.
Link: https://lore.kernel.org/r/20200722125849.17418-5-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Instead of calling fsnotify() twice, once with parent inode and once
with child inode, if event should be sent to parent inode, send it
with both parent and child inodes marks in object type iterator and call
the backend handle_event() callback only once.
The parent inode is assigned to the standard "inode" iterator type and
the child inode is assigned to the special "child" iterator type.
In that case, the bit FS_EVENT_ON_CHILD will be set in the event mask,
the dir argument to handle_event will be the parent inode, the file_name
argument to handle_event is non NULL and refers to the name of the child
and the child inode can be accessed with fsnotify_data_inode().
This will allow fanotify to make decisions based on child or parent's
ignored mask. For example, when a parent is interested in a specific
event on its children, but a specific child wishes to ignore this event,
the event will not be reported. This is not what happens with current
code, but according to man page, it is the expected behavior.
Link: https://lore.kernel.org/r/20200716084230.30611-15-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
When creating an FS_MODIFY event on inode itself (not on parent)
the file_name argument should be NULL.
The change to send a non NULL name to inode itself was done on purpuse
as part of another commit, as Tejun writes: "...While at it, supply the
target file name to fsnotify() from kernfs_node->name.".
But this is wrong practice and inconsistent with inotify behavior when
watching a single file. When a child is being watched (as opposed to the
parent directory) the inotify event should contain the watch descriptor,
but not the file name.
Fixes: df6a58c5c5aa ("kernfs: don't depend on d_find_any_alias()...")
Link: https://lore.kernel.org/r/20200708111156.24659-5-amir73il@gmail.com
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Convert comments that reference mmap_sem to reference mmap_lock instead.
[akpm@linux-foundation.org: fix up linux-next leftovers]
[akpm@linux-foundation.org: s/lockaphore/lock/, per Vlastimil]
[akpm@linux-foundation.org: more linux-next fixups, per Michel]
Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Liam Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ying Han <yinghan@google.com>
Link: http://lkml.kernel.org/r/20200520052908.204642-13-walken@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The kernfs_node lockdep tracking is being done on kn->active, the
active reference count. The other reference count (kn->count) is not
tracked by lockdep. So change the lockdep name to reflect what it is
tracking.
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20200402171056.27871-1-longman@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
User extended attributes are useful as metadata storage for kernfs
consumers like cgroups. Especially in the case of cgroups, it is useful
to have a central metadata store that multiple processes/services can
use to coordinate actions.
A concrete example is for userspace out of memory killers. We want to
let delegated cgroup subtree owners (running as non-root) to be able to
say "please avoid killing this cgroup". This is especially important for
desktop linux as delegated subtrees owners are less likely to run as
root.
This patch introduces a new flag, KERNFS_ROOT_SUPPORT_USER_XATTR, that
lets kernfs consumers enable user xattr support. An initial limit of 128
entries or 128KB -- whichever is hit first -- is placed per cgroup
because xattrs come from kernel memory and we don't want to let
unprivileged users accidentally eat up too much kernel memory.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This helps set up size accounting in the next commit. Without this out
param, it's difficult to find out the removed xattr size without taking
a lock for longer and walking the xattr linked list twice.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs timestamp updates from Al Viro:
"More 64bit timestamp work"
* 'imm.timestamp' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
kernfs: don't bother with timestamp truncation
fs: Do not overload update_time
fs: Delete timespec64_trunc()
fs: ubifs: Eliminate timespec64_trunc() usage
fs: ceph: Delete timespec64_trunc() usage
fs: cifs: Delete usage of timespec64_trunc
fs: fat: Eliminate timespec64_trunc() usage
utimes: Clamp the timestamps in notify_change()
|
|
Previously there was an additional check if variable pos is not null.
However, this check happens after entering while loop and only then,
which can happen only if pos is not null.
Therefore the additional check is redundant and can be removed.
Signed-off-by: Mateusz Nosek <mateusznosek0@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20191230191628.21099-1-mateusznosek0@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
kernfs users are not going to have limited
range or granularity anyway.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Pull vfs d_inode/d_flags memory ordering fixes from Al Viro:
"Fallout from tree-wide audit for ->d_inode/->d_flags barriers use.
Basically, the problem is that negative pinned dentries require
careful treatment - unless ->d_lock is locked or parent is held at
least shared, another thread can make them positive right under us.
Most of the uses turned out to be safe - the main surprises as far as
filesystems are concerned were
- race in dget_parent() fastpath, that might end up with the caller
observing the returned dentry _negative_, due to insufficient
barriers. It is positive in memory, but we could end up seeing the
wrong value of ->d_inode in CPU cache. Fixed.
- manual checks that result of lookup_one_len_unlocked() is positive
(and rejection of negatives). Again, insufficient barriers (we
might end up with inconsistent observed values of ->d_inode and
->d_flags). Fixed by switching to a new primitive that does the
checks itself and returns ERR_PTR(-ENOENT) instead of a negative
dentry. That way we get rid of boilerplate converting negatives
into ERR_PTR(-ENOENT) in the callers and have a single place to
deal with the barrier-related mess - inside fs/namei.c rather than
in every caller out there.
The guts of pathname resolution *do* need to be careful - the race
found by Ritesh is real, as well as several similar races.
Fortunately, it turns out that we can take care of that with fairly
local changes in there.
The tree-wide audit had not been fun, and I hate the idea of repeating
it. I think the right approach would be to annotate the places where
we are _not_ guaranteed ->d_inode/->d_flags stability and have sparse
catch regressions. But I'm still not sure what would be the least
invasive way of doing that and it's clearly the next cycle fodder"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs/namei.c: fix missing barriers when checking positivity
fix dget_parent() fastpath race
new helper: lookup_positive_unlocked()
fs/namei.c: pull positivity check into follow_managed()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- A comprehensive rewrite of the robust/PI futex code's exit handling
to fix various exit races. (Thomas Gleixner et al)
- Rework the generic REFCOUNT_FULL implementation using
atomic_fetch_* operations so that the performance impact of the
cmpxchg() loops is mitigated for common refcount operations.
With these performance improvements the generic implementation of
refcount_t should be good enough for everybody - and this got
confirmed by performance testing, so remove ARCH_HAS_REFCOUNT and
REFCOUNT_FULL entirely, leaving the generic implementation enabled
unconditionally. (Will Deacon)
- Other misc changes, fixes, cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
lkdtm: Remove references to CONFIG_REFCOUNT_FULL
locking/refcount: Remove unused 'refcount_error_report()' function
locking/refcount: Consolidate implementations of refcount_t
locking/refcount: Consolidate REFCOUNT_{MAX,SATURATED} definitions
locking/refcount: Move saturation warnings out of line
locking/refcount: Improve performance of generic REFCOUNT_FULL code
locking/refcount: Move the bulk of the REFCOUNT_FULL implementation into the <linux/refcount.h> header
locking/refcount: Remove unused refcount_*_checked() variants
locking/refcount: Ensure integer operands are treated as signed
locking/refcount: Define constants for saturation and max refcount values
futex: Prevent exit livelock
futex: Provide distinct return value when owner is exiting
futex: Add mutex around futex exit
futex: Provide state handling for exec() as well
futex: Sanitize exit state handling
futex: Mark the begin of futex exit explicitly
futex: Set task::futex_state to DEAD right after handling futex exit
futex: Split futex_mm_release() for exit/exec
exit/exec: Seperate mm_release()
futex: Replace PF_EXITPIDONE with a state
...
|
|
Most of the callers of lookup_one_len_unlocked() treat negatives are
ERR_PTR(-ENOENT). Provide a helper that would do just that. Note
that a pinned positive dentry remains positive - it's ->d_inode is
stable, etc.; a pinned _negative_ dentry can become positive at any
point as long as you are not holding its parent at least shared.
So using lookup_one_len_unlocked() needs to be careful;
lookup_positive_unlocked() is safer and that's what the callers
end up open-coding anyway.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Each kernfs_node is identified with a 64bit ID. The low 32bit is
exposed as ino and the high gen. While this already allows using inos
as keys by looking up with wildcard generation number of 0, it's
adding unnecessary complications for 64bit ino archs which can
directly use kernfs_node IDs as inos to uniquely identify each cgroup
instance.
This patch exposes IDs directly as inos on 64bit ino archs. The
conversion is mostly straight-forward.
* 32bit ino archs behave the same as before. 64bit ino archs now use
the whole 64bit ID as ino and the generation number is fixed at 1.
* 64bit inos still use the same idr allocator which gurantees that the
lower 32bits identify the current live instance uniquely and the
high 32bits are incremented whenever the low bits wrap. As the
upper 32bits are no longer used as gen and we don't wanna start ino
allocation with 33rd bit set, the initial value for highbits
allocation is changed to 0 on 64bit ino archs.
* blktrace exposes two 32bit numbers - (INO,GEN) pair - to identify
the issuing cgroup. Userland builds FILEID_INO32_GEN fids from
these numbers to look up the cgroups. To remain compatible with the
behavior, always output (LOW32,HIGH32) which will be constructed
back to the original 64bit ID by __kernfs_fh_to_dentry().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
|
|
The current kernfs exportfs implementation uses the generic_fh_*()
helpers and FILEID_INO32_GEN[_PARENT] which limits ino to 32bits.
Let's implement custom exportfs operations and fid type to remove the
restriction.
* FILEID_KERNFS is a single u64 value whose content is
kernfs_node->id. This is the only native fid type.
* For backward compatibility with blk_log_action() path which exposes
(ino,gen) pairs which userland assembles into FILEID_INO32_GEN keys,
combine the generic keys into 64bit IDs in the same order.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
|
|
kernfs_find_and_get_node_by_ino() looks the kernfs_node matching the
specified ino. On top of that, kernfs_get_node_by_id() and
kernfs_fh_get_inode() implement full ID matching by testing the rest
of ID.
On surface, confusingly, the two are slightly different in that the
latter uses 0 gen as wildcard while the former doesn't - does it mean
that the latter can't uniquely identify inodes w/ 0 gen? In practice,
this is a distinction without a difference because generation number
starts at 1. There are no actual IDs with 0 gen, so it can always
safely used as wildcard.
Let's simplify the code by renaming kernfs_find_and_get_node_by_ino()
to kernfs_find_and_get_node_by_id(), moving all lookup logics into it,
and removing now unnecessary kernfs_get_node_by_id().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
kernfs_node->id is currently a union kernfs_node_id which represents
either a 32bit (ino, gen) pair or u64 value. I can't see much value
in the usage of the union - all that's needed is a 64bit ID which the
current code is already limited to. Using a union makes the code
unnecessarily complicated and prevents using 64bit ino without adding
practical benefits.
This patch drops union kernfs_node_id and makes kernfs_node->id a u64.
ino is stored in the lower 32bits and gen upper. Accessors -
kernfs[_id]_ino() and kernfs[_id]_gen() - are added to retrieve the
ino and gen. This simplifies ID handling less cumbersome and will
allow using 64bit inos on supported archs.
This patch doesn't make any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alexei Starovoitov <ast@kernel.org>
|
|
kernfs node can be created in two separate steps - allocation and
activation. This is used to make kernfs nodes visible only after the
internal states attached to the node are fully initialized.
kernfs_find_and_get_node_by_id() currently allows lookups of nodes
which aren't activated yet and thus can expose nodes are which are
still being prepped by kernfs users.
Fix it by disallowing lookups of nodes which aren't activated yet.
kernfs_find_and_get_node_by_ino()
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
|
|
kernfs_find_and_get_node_by_ino() uses RCU protection. It's currently
a bit buggy because it can look up a node which hasn't been activated
yet and thus may end up exposing a node that the kernfs user is still
prepping.
While it can be fixed by pushing it further in the current direction,
it's already complicated and isn't clear whether the complexity is
justified. The main use of kernfs_find_and_get_node_by_ino() is for
exportfs operations. They aren't super hot and all the follow-up
operations (e.g. mapping to path) use normal locking anyway.
Let's switch to a dumber locking scheme and protect the lookup with
kernfs_idr_lock.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
|
|
When the 32bit ino wraps around, kernfs increments the generation
number to distinguish reused ino instances. The wrap-around detection
tests whether the allocated ino is lower than what the cursor but the
cursor is pointing to the next ino to allocate so the condition never
triggers.
Fix it by remembering the last ino and comparing against that.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 4a3ef68acacf ("kernfs: implement i_generation")
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org # v4.14+
|
|
Since the following commit:
b4adfe8e05f1 ("locking/lockdep: Remove unused argument in __lock_release")
@nested is no longer used in lock_release(), so remove it from all
lock_release() calls and friends.
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: airlied@linux.ie
Cc: akpm@linux-foundation.org
Cc: alexander.levin@microsoft.com
Cc: daniel@iogearbox.net
Cc: davem@davemloft.net
Cc: dri-devel@lists.freedesktop.org
Cc: duyuyang@gmail.com
Cc: gregkh@linuxfoundation.org
Cc: hannes@cmpxchg.org
Cc: intel-gfx@lists.freedesktop.org
Cc: jack@suse.com
Cc: jlbec@evilplan.or
Cc: joonas.lahtinen@linux.intel.com
Cc: joseph.qi@linux.alibaba.com
Cc: jslaby@suse.com
Cc: juri.lelli@redhat.com
Cc: maarten.lankhorst@linux.intel.com
Cc: mark@fasheh.com
Cc: mhocko@kernel.org
Cc: mripard@kernel.org
Cc: ocfs2-devel@oss.oracle.com
Cc: rodrigo.vivi@intel.com
Cc: sean@poorly.run
Cc: st@kernel.org
Cc: tj@kernel.org
Cc: tytso@mit.edu
Cc: vdavydov.dev@gmail.com
Cc: vincent.guittot@linaro.org
Cc: viro@zeniv.linux.org.uk
Link: https://lkml.kernel.org/r/1568909380-32199-1-git-send-email-cai@lca.pw
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground
Pull y2038 vfs updates from Arnd Bergmann:
"Add inode timestamp clamping.
This series from Deepa Dinamani adds a per-superblock minimum/maximum
timestamp limit for a file system, and clamps timestamps as they are
written, to avoid random behavior from integer overflow as well as
having different time stamps on disk vs in memory.
At mount time, a warning is now printed for any file system that can
represent current timestamps but not future timestamps more than 30
years into the future, similar to the arbitrary 30 year limit that was
added to settimeofday().
This was picked as a compromise to warn users to migrate to other file
systems (e.g. ext4 instead of ext3) when they need the file system to
survive beyond 2038 (or similar limits in other file systems), but not
get in the way of normal usage"
* tag 'y2038-vfs' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
ext4: Reduce ext4 timestamp warnings
isofs: Initialize filesystem timestamp ranges
pstore: fs superblock limits
fs: omfs: Initialize filesystem timestamp ranges
fs: hpfs: Initialize filesystem timestamp ranges
fs: ceph: Initialize filesystem timestamp ranges
fs: sysv: Initialize filesystem timestamp ranges
fs: affs: Initialize filesystem timestamp ranges
fs: fat: Initialize filesystem timestamp ranges
fs: cifs: Initialize filesystem timestamp ranges
fs: nfs: Initialize filesystem timestamp ranges
ext4: Initialize timestamps limits
9p: Fill min and max timestamps in sb
fs: Fill in max and min timestamps in superblock
utimes: Clamp the timestamps before update
mount: Add mount warning for impending timestamp expiry
timestamp_truncate: Replace users of timespec64_trunc
vfs: Add timestamp_truncate() api
vfs: Add file timestamp range support
|
|
Update the inode timestamp updates to use timestamp_truncate()
instead of timespec64_trunc().
The change was mostly generated by the following coccinelle
script.
virtual context
virtual patch
@r1 depends on patch forall@
struct inode *inode;
identifier i_xtime =~ "^i_[acm]time$";
expression e;
@@
inode->i_xtime =
- timespec64_trunc(
+ timestamp_truncate(
...,
- e);
+ inode);
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Jeff Layton <jlayton@kernel.org>
Cc: adrian.hunter@intel.com
Cc: dedekind1@gmail.com
Cc: gregkh@linuxfoundation.org
Cc: hch@lst.de
Cc: jaegeuk@kernel.org
Cc: jlbec@evilplan.org
Cc: richard@nod.at
Cc: tj@kernel.org
Cc: yuchao0@huawei.com
Cc: linux-f2fs-devel@lists.sourceforge.net
Cc: linux-ntfs-dev@lists.sourceforge.net
Cc: linux-mtd@lists.infradead.org
|
|
kernfs_path_from_node_locked()
In kernfs_path_from_node_locked(), there is an if statement on line 147
to check whether buf is NULL:
if (buf)
When buf is NULL, it is used on line 151:
len += strlcpy(buf + len, parent_str, ...)
and line 158:
len += strlcpy(buf + len, "/", ...)
and line 160:
len += strlcpy(buf + len, kn->name, ...)
Thus, possible null-pointer dereferences may occur.
To fix these possible bugs, buf is checked before being used.
If it is NULL, -EINVAL is returned.
These bugs are found by a static analysis tool STCheck written by us.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20190724022242.27505-1-baijiaju1990@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Get root safely after kn is ensureed to be not null.
Signed-off-by: Peng Wang <rocking@whu.edu.cn>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20190708151611.13242-1-rocking@whu.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this file is released under the gplv2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 68 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190114.292346262@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc dcache updates from Al Viro:
"Most of this pile is putting name length into struct name_snapshot and
making use of it.
The beginning of this series ("ovl_lookup_real_one(): don't bother
with strlen()") ought to have been split in two (separate switch of
name_snapshot to struct qstr from overlayfs reaping the trivial
benefits of that), but I wanted to avoid a rebase - by the time I'd
spotted that it was (a) in -next and (b) close to 5.1-final ;-/"
* 'work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
audit_compare_dname_path(): switch to const struct qstr *
audit_update_watch(): switch to const struct qstr *
inotify_handle_event(): don't bother with strlen()
fsnotify: switch send_to_group() and ->handle_event to const struct qstr *
fsnotify(): switch to passing const struct qstr * for file_name
switch fsnotify_move() to passing const struct qstr * for old_name
ovl_lookup_real_one(): don't bother with strlen()
sysv: bury the broken "quietly truncate the long filenames" logics
nsfs: unobfuscate
unexport d_alloc_pseudo()
|
