summaryrefslogtreecommitdiff
path: root/fs/ocfs2
AgeCommit message (Collapse)Author
2018-12-28ocfs2: don't clear bh uptodate for block readJunxiao Bi
For sync io read in ocfs2_read_blocks_sync(), first clear bh uptodate flag and submit the io, second wait io done, last check whether bh uptodate, if not return io error. If two sync io for the same bh were issued, it could be the first io done and set uptodate flag, but just before check that flag, the second io came in and cleared uptodate, then ocfs2_read_blocks_sync() for the first io will return IO error. Indeed it's not necessary to clear uptodate flag, as the io end handler end_buffer_read_sync() will set or clear it based on io succeed or failed. The following message was found from a nfs server but the underlying storage returned no error. [4106438.567376] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2780 ERROR: read block 1238823695 failed -5 [4106438.567569] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2812 ERROR: status = -5 [4106438.567611] (nfsd,7146,3):ocfs2_test_inode_bit:2894 ERROR: get alloc slot and bit failed -5 [4106438.567643] (nfsd,7146,3):ocfs2_test_inode_bit:2932 ERROR: status = -5 [4106438.567675] (nfsd,7146,3):ocfs2_get_dentry:94 ERROR: test inode bit failed -5 Same issue in non sync read ocfs2_read_blocks(), fixed it as well. Link: http://lkml.kernel.org/r/20181121020023.3034-4-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Changwei Ge <ge.changwei@h3c.com> Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mfasheh@versity.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28ocfs2: clear journal dirty flag after shutdown journalJunxiao Bi
Dirty flag of the journal should be cleared at the last stage of umount, if do it before jbd2_journal_destroy(), then some metadata in uncommitted transaction could be lost due to io error, but as dirty flag of journal was already cleared, we can't find that until run a full fsck. This may cause system panic or other corruption. Link: http://lkml.kernel.org/r/20181121020023.3034-3-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Cc: Jun Piao <piaojun@huawei.com> Cc: Changwei Ge <ge.changwei@h3c.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@versity.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28ocfs2: fix panic due to unrecovered local allocJunxiao Bi
mount.ocfs2 ignore the inconsistent error that journal is clean but local alloc is unrecovered. After mount, local alloc not empty, then reserver cluster didn't alloc a new local alloc window, reserveration map is empty(ocfs2_reservation_map.m_bitmap_len = 0), that triggered the following panic. This issue was reported at https://oss.oracle.com/pipermail/ocfs2-devel/2015-May/010854.html and was advised to fixed during mount. But this is a very unusual inconsistent state, usually journal dirty flag should be cleared at the last stage of umount until every other things go right. We may need do further debug to check that. Any way to avoid possible futher corruption, mount should be abort and fsck should be run. (mount.ocfs2,1765,1):ocfs2_load_local_alloc:353 ERROR: Local alloc hasn't been recovered! found = 6518, set = 6518, taken = 8192, off = 15912372 ocfs2: Mounting device (202,64) on (node 0, slot 3) with ordered data mode. o2dlm: Joining domain 89CEAC63CC4F4D03AC185B44E0EE0F3F ( 0 1 2 3 4 5 6 8 ) 8 nodes ocfs2: Mounting device (202,80) on (node 0, slot 3) with ordered data mode. o2hb: Region 89CEAC63CC4F4D03AC185B44E0EE0F3F (xvdf) is now a quorum device o2net: Accepted connection from node yvwsoa17p (num 7) at 172.22.77.88:7777 o2dlm: Node 7 joins domain 64FE421C8C984E6D96ED12C55FEE2435 ( 0 1 2 3 4 5 6 7 8 ) 9 nodes o2dlm: Node 7 joins domain 89CEAC63CC4F4D03AC185B44E0EE0F3F ( 0 1 2 3 4 5 6 7 8 ) 9 nodes ------------[ cut here ]------------ kernel BUG at fs/ocfs2/reservations.c:507! invalid opcode: 0000 [#1] SMP Modules linked in: ocfs2 rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs fscache lockd grace ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sunrpc ipt_REJECT nf_reject_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 ovmapi ppdev parport_pc parport xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea acpi_cpufreq pcspkr i2c_piix4 i2c_core sg ext4 jbd2 mbcache2 sr_mod cdrom xen_blkfront pata_acpi ata_generic ata_piix floppy dm_mirror dm_region_hash dm_log dm_mod CPU: 0 PID: 4349 Comm: startWebLogic.s Not tainted 4.1.12-124.19.2.el6uek.x86_64 #2 Hardware name: Xen HVM domU, BIOS 4.4.4OVM 09/06/2018 task: ffff8803fb04e200 ti: ffff8800ea4d8000 task.ti: ffff8800ea4d8000 RIP: 0010:[<ffffffffa05e96a8>] [<ffffffffa05e96a8>] __ocfs2_resv_find_window+0x498/0x760 [ocfs2] Call Trace: ocfs2_resmap_resv_bits+0x10d/0x400 [ocfs2] ocfs2_claim_local_alloc_bits+0xd0/0x640 [ocfs2] __ocfs2_claim_clusters+0x178/0x360 [ocfs2] ocfs2_claim_clusters+0x1f/0x30 [ocfs2] ocfs2_convert_inline_data_to_extents+0x634/0xa60 [ocfs2] ocfs2_write_begin_nolock+0x1c6/0x1da0 [ocfs2] ocfs2_write_begin+0x13e/0x230 [ocfs2] generic_perform_write+0xbf/0x1c0 __generic_file_write_iter+0x19c/0x1d0 ocfs2_file_write_iter+0x589/0x1360 [ocfs2] __vfs_write+0xb8/0x110 vfs_write+0xa9/0x1b0 SyS_write+0x46/0xb0 system_call_fastpath+0x18/0xd7 Code: ff ff 8b 75 b8 39 75 b0 8b 45 c8 89 45 98 0f 84 e5 fe ff ff 45 8b 74 24 18 41 8b 54 24 1c e9 56 fc ff ff 85 c0 0f 85 48 ff ff ff <0f> 0b 48 8b 05 cf c3 de ff 48 ba 00 00 00 00 00 00 00 10 48 85 RIP __ocfs2_resv_find_window+0x498/0x760 [ocfs2] RSP <ffff8800ea4db668> ---[ end trace 566f07529f2edf3c ]--- Kernel panic - not syncing: Fatal exception Kernel Offset: disabled Link: http://lkml.kernel.org/r/20181121020023.3034-2-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com> Acked-by: Joseph Qi <jiangqi903@gmail.com> Cc: Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28ocfs2: improve ocfs2 MakefileLarry Chen
Included file path was hard-wired in the ocfs2 makefile, which might causes some confusion when compiling ocfs2 as an external module. Say if we compile ocfs2 module as following. cp -r /kernel/tree/fs/ocfs2 /other/dir/ocfs2 cd /other/dir/ocfs2 make -C /path/to/kernel_source M=`pwd` modules Acutally, the compiler wil try to find included file in /kernel/tree/fs/ocfs2, rather than the directory /other/dir/ocfs2. To fix this little bug, we introduce the var $(src) provided by kbuild. $(src) means the absolute path of the running kbuild file. Link: http://lkml.kernel.org/r/20181108085546.15149-1-lchen@suse.com Signed-off-by: Larry Chen <lchen@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28ocfs2: remove set but not used variable 'lastzero'zhong jiang
lastzero is not used after setting its value. It is safe to remove the unused variable. Link: http://lkml.kernel.org/r/1540296942-24533-1-git-send-email-zhongjiang@huawei.com Signed-off-by: zhong jiang <zhongjiang@huawei.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28ocfs2: dlmfs: remove set but not used variable 'status'zhong jiang
status is not used after setting its value. It is safe to remove the unused variable. Link: http://lkml.kernel.org/r/1540300179-26697-1-git-send-email-zhongjiang@huawei.com Signed-off-by: zhong jiang <zhongjiang@huawei.com> Reviewed-by: Jun Piao <piaojun@huawei.com> Acked-by: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28ocfs2: optimize the reading of heartbeat dataJia Guo
Reading heartbeat data from lowest node rather than from zero, in cases where the node is not defined from zero, can reduce the number of sectors read. Here is a simple test data obtained with 'iostat -dmx dm-5 2', with two nodes in the cluster, node number 10, 20, respectively. Before optimization: Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await r_await w_await svctm %util dm-5 0.00 0.00 0.50 0.50 0.01 0.00 11.00 0.00 1.00 1.00 1.00 1.50 0.15 After the optimization: Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await r_await w_await svctm %util dm-5 0.00 0.00 0.50 0.50 0.00 0.00 6.00 0.00 0.50 1.00 0.00 0.50 0.05 Link: http://lkml.kernel.org/r/99fe4988-69ac-3615-a218-3042fe6fbe72@huawei.com Signed-off-by: Jia Guo <guojia12@huawei.com> Reviewed-by: Jun Piao <piaojun@huawei.com> Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com> Acked-by: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-27Merge tag 'locks-v4.21-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux Pull file locking updates from Jeff Layton: "The main change in this set is Neil Brown's work to reduce the thundering herd problem when a heavily-contended file lock is released. Previously we'd always wake up all waiters when this occurred. With this set, we'll now we only wake up waiters that were blocked on the range being released" * tag 'locks-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: locks: Use inode_is_open_for_write fs/locks: remove unnecessary white space. fs/locks: merge posix_unblock_lock() and locks_delete_block() fs/locks: create a tree of dependent requests. fs/locks: change all *_conflict() functions to return bool. fs/locks: always delete_block after waiting. fs/locks: allow a lock request to block other requests. fs/locks: use properly initialized file_lock when unlocking. ocfs2: properly initial file_lock used for unlock. gfs2: properly initial file_lock used for unlock. NFS: use locks_copy_lock() to copy locks. fs/locks: split out __locks_wake_up_blocks(). fs/locks: rename some lists and pointers.
2018-11-30ocfs2: fix potential use after freePan Bian
ocfs2_get_dentry() calls iput(inode) to drop the reference count of inode, and if the reference count hits 0, inode is freed. However, in this function, it then reads inode->i_generation, which may result in a use after free bug. Move the put operation later. Link: http://lkml.kernel.org/r/1543109237-110227-1-git-send-email-bianpan2016@163.com Fixes: 781f200cb7a("ocfs2: Remove masklog ML_EXPORT.") Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30ocfs2: fix deadlock caused by ocfs2_defrag_extent()Larry Chen
ocfs2_defrag_extent may fall into deadlock. ocfs2_ioctl_move_extents ocfs2_ioctl_move_extents ocfs2_move_extents ocfs2_defrag_extent ocfs2_lock_allocators_move_extents ocfs2_reserve_clusters inode_lock GLOBAL_BITMAP_SYSTEM_INODE __ocfs2_flush_truncate_log inode_lock GLOBAL_BITMAP_SYSTEM_INODE As backtrace shows above, ocfs2_reserve_clusters() will call inode_lock against the global bitmap if local allocator has not sufficient cluters. Once global bitmap could meet the demand, ocfs2_reserve_cluster will return success with global bitmap locked. After ocfs2_reserve_cluster(), if truncate log is full, __ocfs2_flush_truncate_log() will definitely fall into deadlock because it needs to inode_lock global bitmap, which has already been locked. To fix this bug, we could remove from ocfs2_lock_allocators_move_extents() the code which intends to lock global allocator, and put the removed code after __ocfs2_flush_truncate_log(). ocfs2_lock_allocators_move_extents() is referred by 2 places, one is here, the other does not need the data allocator context, which means this patch does not affect the caller so far. Link: http://lkml.kernel.org/r/20181101071422.14470-1-lchen@suse.com Signed-off-by: Larry Chen <lchen@suse.com> Reviewed-by: Changwei Ge <ge.changwei@h3c.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30ocfs2: properly initial file_lock used for unlock.NeilBrown
Rather than assuming all-zeros is sufficient, use the available API to initialize the file_lock structure use for unlock. VFS-level changes will soon make it important that the list_heads in file_lock are always properly initialized. Signed-off-by: NeilBrown <neilb@suse.com> Reviewed-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org>
2018-11-18ocfs2: free up write context when direct IO failedWengang Wang
The write context should also be freed even when direct IO failed. Otherwise a memory leak is introduced and entries remain in oi->ip_unwritten_list causing the following BUG later in unlink path: ERROR: bug expression: !list_empty(&oi->ip_unwritten_list) ERROR: Clear inode of 215043, inode has unwritten extents ... Call Trace: ? __set_current_blocked+0x42/0x68 ocfs2_evict_inode+0x91/0x6a0 [ocfs2] ? bit_waitqueue+0x40/0x33 evict+0xdb/0x1af iput+0x1a2/0x1f7 do_unlinkat+0x194/0x28f SyS_unlinkat+0x1b/0x2f do_syscall_64+0x79/0x1ae entry_SYSCALL_64_after_hwframe+0x151/0x0 This patch also logs, with frequency limit, direct IO failures. Link: http://lkml.kernel.org/r/20181102170632.25921-1-wen.gang.wang@oracle.com Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Changwei Ge <ge.changwei@h3c.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-03ocfs2: fix clusters leak in ocfs2_defrag_extent()Larry Chen
ocfs2_defrag_extent() might leak allocated clusters. When the file system has insufficient space, the number of claimed clusters might be less than the caller wants. If that happens, the original code might directly commit the transaction without returning clusters. This patch is based on code in ocfs2_add_clusters_in_btree(). [akpm@linux-foundation.org: include localalloc.h, reduce scope of data_ac] Link: http://lkml.kernel.org/r/20180904041621.16874-3-lchen@suse.com Signed-off-by: Larry Chen <lchen@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-03ocfs2: dlmglue: clean up timestamp handlingArnd Bergmann
The handling of timestamps outside of the 1970..2038 range in the dlm glue is rather inconsistent: on 32-bit architectures, this has always wrapped around to negative timestamps in the 1902..1969 range, while on 64-bit kernels all timestamps are interpreted as positive 34 bit numbers in the 1970..2514 year range. Now that the VFS code handles 64-bit timestamps on all architectures, we can make the behavior more consistent here, and return the same result that we had on 64-bit already, making the file system y2038 safe in the process. Outside of dlmglue, it already uses 64-bit on-disk timestamps anway, so that part is fine. For consistency, I'm changing ocfs2_pack_timespec() to clamp anything outside of the supported range to the minimum and maximum values. This avoids a possible ambiguity of values before 1970 in particular, which used to be interpreted as times at the end of the 2514 range previously. Link: http://lkml.kernel.org/r/20180619155826.4106487-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-03ocfs2: don't put and assigning null to bh allocated outsideChangwei Ge
ocfs2_read_blocks() and ocfs2_read_blocks_sync() are both used to read several blocks from disk. Currently, the input argument *bhs* can be NULL or NOT. It depends on the caller's behavior. If the function fails in reading blocks from disk, the corresponding bh will be assigned to NULL and put. Obviously, above process for non-NULL input bh is not appropriate. Because the caller doesn't even know its bhs are put and re-assigned. If buffer head is managed by caller, ocfs2_read_blocks and ocfs2_read_blocks_sync() should not evaluate it to NULL. It will cause caller accessing illegal memory, thus crash. Link: http://lkml.kernel.org/r/HK2PR06MB045285E0F4FBB561F9F2F9B3D5680@HK2PR06MB0452.apcprd06.prod.outlook.com Signed-off-by: Changwei Ge <ge.changwei@h3c.com> Reviewed-by: Guozhonghua <guozhonghua@h3c.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-03ocfs2: fix a misuse a of brelse after failing ocfs2_check_dir_entryChangwei Ge
Somehow, file system metadata was corrupted, which causes ocfs2_check_dir_entry() to fail in function ocfs2_dir_foreach_blk_el(). According to the original design intention, if above happens we should skip the problematic block and continue to retrieve dir entry. But there is obviouse misuse of brelse around related code. After failure of ocfs2_check_dir_entry(), current code just moves to next position and uses the problematic buffer head again and again during which the problematic buffer head is released for multiple times. I suppose, this a serious issue which is long-lived in ocfs2. This may cause other file systems which is also used in a the same host insane. So we should also consider about bakcporting this patch into linux -stable. Link: http://lkml.kernel.org/r/HK2PR06MB045211675B43EED794E597B6D56E0@HK2PR06MB0452.apcprd06.prod.outlook.com Signed-off-by: Changwei Ge <ge.changwei@h3c.com> Suggested-by: Changkuo Shi <shi.changkuo@h3c.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-03ocfs2: don't use iocb when EIOCBQUEUED returnsChangwei Ge
When -EIOCBQUEUED returns, it means that aio_complete() will be called from dio_complete(), which is an asynchronous progress against write_iter. Generally, IO is a very slow progress than executing instruction, but we still can't take the risk to access a freed iocb. And we do face a BUG crash issue. Using the crash tool, iocb is obviously freed already. crash> struct -x kiocb ffff881a350f5900 struct kiocb { ki_filp = 0xffff881a350f5a80, ki_pos = 0x0, ki_complete = 0x0, private = 0x0, ki_flags = 0x0 } And the backtrace shows: ocfs2_file_write_iter+0xcaa/0xd00 [ocfs2] aio_run_iocb+0x229/0x2f0 do_io_submit+0x291/0x540 SyS_io_submit+0x10/0x20 system_call_fastpath+0x16/0x75 Link: http://lkml.kernel.org/r/1523361653-14439-1-git-send-email-ge.changwei@h3c.com Signed-off-by: Changwei Ge <ge.changwei@h3c.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-03ocfs2: without quota support, avoid calling quota recoveryGuozhonghua
During one dead node's recovery by other node, quota recovery work will be queued. We should avoid calling quota when it is not supported, so check the quota flags. Link: http://lkml.kernel.org/r/71604351584F6A4EBAE558C676F37CA401071AC9FB@H3CMLB12-EX.srv.huawei-3com.com Signed-off-by: guozhonghua <guozhonghua@h3c.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-03ocfs2: remove ocfs2_is_o2cb_active()Gang He
Remove ocfs2_is_o2cb_active(). We have similar functions to identify which cluster stack is being used via osb->osb_cluster_stack. Secondly, the current implementation of ocfs2_is_o2cb_active() is not totally safe. Based on the design of stackglue, we need to get ocfs2_stack_lock before using ocfs2_stack related data structures, and that active_stack pointer can be NULL in the case of mount failure. Link: http://lkml.kernel.org/r/1495441079-11708-1-git-send-email-ghe@suse.com Signed-off-by: Gang He <ghe@suse.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Reviewed-by: Eric Ren <zren@suse.com> Acked-by: Changwei Ge <ge.changwei@h3c.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-02Merge tag 'xfs-4.20-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull vfs dedup fixes from Dave Chinner: "This reworks the vfs data cloning infrastructure. We discovered many issues with these interfaces late in the 4.19 cycle - the worst of them (data corruption, setuid stripping) were fixed for XFS in 4.19-rc8, but a larger rework of the infrastructure fixing all the problems was needed. That rework is the contents of this pull request. Rework the vfs_clone_file_range and vfs_dedupe_file_range infrastructure to use a common .remap_file_range method and supply generic bounds and sanity checking functions that are shared with the data write path. The current VFS infrastructure has problems with rlimit, LFS file sizes, file time stamps, maximum filesystem file sizes, stripping setuid bits, etc and so they are addressed in these commits. We also introduce the ability for the ->remap_file_range methods to return short clones so that clones for vfs_copy_file_range() don't get rejected if the entire range can't be cloned. It also allows filesystems to sliently skip deduplication of partial EOF blocks if they are not capable of doing so without requiring errors to be thrown to userspace. Existing filesystems are converted to user the new remap_file_range method, and both XFS and ocfs2 are modified to make use of the new generic checking infrastructure" * tag 'xfs-4.20-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (28 commits) xfs: remove [cm]time update from reflink calls xfs: remove xfs_reflink_remap_range xfs: remove redundant remap partial EOF block checks xfs: support returning partial reflink results xfs: clean up xfs_reflink_remap_blocks call site xfs: fix pagecache truncation prior to reflink ocfs2: remove ocfs2_reflink_remap_range ocfs2: support partial clone range and dedupe range ocfs2: fix pagecache truncation prior to reflink ocfs2: truncate page cache for clone destination file before remapping vfs: clean up generic_remap_file_range_prep return value vfs: hide file range comparison function vfs: enable remap callers that can handle short operations vfs: plumb remap flags through the vfs dedupe functions vfs: plumb remap flags through the vfs clone functions vfs: make remap_file_range functions take and return bytes completed vfs: remap helper should update destination inode metadata vfs: pass remap flags to generic_remap_checks vfs: pass remap flags to generic_remap_file_range_prep vfs: combine the clone and dedupe into a single remap_file_range ...
2018-11-01Merge branch 'work.afs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull AFS updates from Al Viro: "AFS series, with some iov_iter bits included" * 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits) missing bits of "iov_iter: Separate type from direction and use accessor functions" afs: Probe multiple fileservers simultaneously afs: Fix callback handling afs: Eliminate the address pointer from the address list cursor afs: Allow dumping of server cursor on operation failure afs: Implement YFS support in the fs client afs: Expand data structure fields to support YFS afs: Get the target vnode in afs_rmdir() and get a callback on it afs: Calc callback expiry in op reply delivery afs: Fix FS.FetchStatus delivery from updating wrong vnode afs: Implement the YFS cache manager service afs: Remove callback details from afs_callback_break struct afs: Commit the status on a new file/dir/symlink afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS afs: Don't invoke the server to read data beyond EOF afs: Add a couple of tracepoints to log I/O errors afs: Handle EIO from delivery function afs: Fix TTL on VL server and address lists afs: Implement VL server rotation afs: Improve FS server rotation error handling ...
2018-10-30ocfs2: remove ocfs2_reflink_remap_rangeDarrick J. Wong
Since ocfs2_remap_file_range is a thin shell around ocfs2_remap_remap_range, move everything from the latter into the former. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-30ocfs2: support partial clone range and dedupe rangeDarrick J. Wong
Change the ocfs2 remap code to allow for returning partial results. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-30ocfs2: fix pagecache truncation prior to reflinkDarrick J. Wong
Prior to remapping blocks, it is necessary to remove pages from the destination file's page cache. Unfortunately, the truncation is not aggressive enough -- if page size > block size, we'll end up zeroing subpage blocks instead of removing them. So, round the start offset down and the end offset up to page boundaries. We already wrote all the dirty data so the larger range should be fine. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-30ocfs2: truncate page cache for clone destination file before remappingDarrick J. Wong
When cloning blocks into another file, truncate the page cache before we start remapping blocks so that concurrent reads wait for us to finish. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-30vfs: clean up generic_remap_file_range_prep return valueDarrick J. Wong
Since the remap prep function can update the length of the remap request, we can change this function to return the usual return status instead of the odd behavior it has now. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-30vfs: make remap_file_range functions take and return bytes completedDarrick J. Wong
Change the remap_file_range functions to take a number of bytes to operate upon and return the number of bytes they operated on. This is a requirement for allowing fs implementations to return short clone/dedupe results to the user, which will enable us to obey resource limits in a graceful manner. A subsequent patch will enable copy_file_range to signal to the ->clone_file_range implementation that it can handle a short length, which will be returned in the function's return value. For now the short return is not implemented anywhere so the behavior won't change -- either copy_file_range manages to clone the entire range or it tries an alternative. Neither clone ioctl can take advantage of this, alas. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-30vfs: pass remap flags to generic_remap_file_range_prepDarrick J. Wong
Plumb the remap flags through the filesystem from the vfs function dispatcher all the way to the prep function to prepare for behavior changes in subsequent patches. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-30vfs: combine the clone and dedupe into a single remap_file_rangeDarrick J. Wong
Combine the clone_file_range and dedupe_file_range operations into a single remap_file_range file operation dispatch since they're fundamentally the same operation. The differences between the two can be made in the prep functions. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-30vfs: rename vfs_clone_file_prep to be more descriptiveDarrick J. Wong
The vfs_clone_file_prep is a generic function to be called by filesystem implementations only. Rename the prefix to generic_ and make it more clear that it applies to remap operations, not just clones. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-30vfs: check file ranges before cloning filesDarrick J. Wong
Move the file range checks from vfs_clone_file_prep into a separate generic_remap_checks function so that all the checks are collected in a central location. This forms the basis for adding more checks from generic_write_checks that will make cloning's input checking more consistent with write input checking. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-26ocfs2: remove set but not used variable 'rb'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: fs/ocfs2/refcounttree.c: In function 'ocfs2_create_reflink_node': fs/ocfs2/refcounttree.c:4138:31: warning: variable 'rb' set but not used [-Wunused-but-set-variable] Link: http://lkml.kernel.org/r/1536198443-113047-1-git-send-email-yuehaibing@huawei.com Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26fs/ocfs2/dlm/dlmdebug.c: fix a sleep-in-atomic-context bug in ↵Jia-Ju Bai
dlm_print_one_mle() The kernel module may sleep with holding a spinlock. The function call paths (from bottom to top) in Linux-4.16 are: [FUNC] get_zeroed_page(GFP_NOFS) fs/ocfs2/dlm/dlmdebug.c, 332: get_zeroed_page in dlm_print_one_mle fs/ocfs2/dlm/dlmmaster.c, 240: dlm_print_one_mle in __dlm_put_mle fs/ocfs2/dlm/dlmmaster.c, 255: __dlm_put_mle in dlm_put_mle fs/ocfs2/dlm/dlmmaster.c, 254: spin_lock in dlm_put_ml [FUNC] get_zeroed_page(GFP_NOFS) fs/ocfs2/dlm/dlmdebug.c, 332: get_zeroed_page in dlm_print_one_mle fs/ocfs2/dlm/dlmmaster.c, 240: dlm_print_one_mle in __dlm_put_mle fs/ocfs2/dlm/dlmmaster.c, 222: __dlm_put_mle in dlm_put_mle_inuse fs/ocfs2/dlm/dlmmaster.c, 219: spin_lock in dlm_put_mle_inuse To fix this bug, GFP_NOFS is replaced with GFP_ATOMIC. This bug is found by my static analysis tool DSAC. Link: http://lkml.kernel.org/r/20180901112528.27025-1-baijiaju1990@gmail.com Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26ocfs2: remove unneeded null checkDing Xiang
Null check for kfree is unnecessary, so remove it. Link: http://lkml.kernel.org/r/1535704514-26559-1-git-send-email-dingxiang@cmss.chinamobile.com Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26ocfs2: remove unused pointer 'eb'Colin Ian King
Pointer 'eb' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'eb' set but not used [-Wunused-but-set-variable] Link: http://lkml.kernel.org/r/20180828141907.10826-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26ocfs2/dlm: remove unnecessary parenthesesNathan Chancellor
Clang warns when more than one set of parentheses is used for a single conditional statement: fs/ocfs2/dlm/dlmthread.c:534:18: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] if ((res->owner == dlm->node_num)) { ~~~~~~~~~~~^~~~~~~~~~~~~~~~ fs/ocfs2/dlm/dlmthread.c:534:18: note: remove extraneous parentheses around the comparison to silence this warning if ((res->owner == dlm->node_num)) { ~ ^ ~ Link: http://lkml.kernel.org/r/20180924181929.6853-1-natechancellor@gmail.com Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reported-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-24iov_iter: Separate type from direction and use accessor functionsDavid Howells
In the iov_iter struct, separate the iterator type from the iterator direction and use accessor functions to access them in most places. Convert a bunch of places to use switch-statements to access them rather then chains of bitwise-AND statements. This makes it easier to add further iterator types. Also, this can be more efficient as to implement a switch of small contiguous integers, the compiler can use ~50% fewer compare instructions than it has to use bitwise-and instructions. Further, cease passing the iterator type into the iterator setup function. The iterator function can set that itself. Only the direction is required. Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-13ocfs2: fix a GCC warningzhong jiang
Fix the following compile warning: fs/ocfs2/dlmglue.c:99:30: warning: ‘lockdep_keys’ defined but not used [-Wunused-variable] static struct lock_class_key lockdep_keys[OCFS2_NUM_LOCK_TYPES]; Link: http://lkml.kernel.org/r/1536938148-32110-1-git-send-email-zhongjiang@huawei.com Signed-off-by: zhong jiang <zhongjiang@huawei.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-05ocfs2: fix locking for res->tracking and dlm->tracking_listAshish Samant
In dlm_init_lockres() we access and modify res->tracking and dlm->tracking_list without holding dlm->track_lock. This can cause list corruptions and can end up in kernel panic. Fix this by locking res->tracking and dlm->tracking_list with dlm->track_lock instead of dlm->spinlock. Link: http://lkml.kernel.org/r/1529951192-4686-1-git-send-email-ashish.samant@oracle.com Signed-off-by: Ashish Samant <ashish.samant@oracle.com> Reviewed-by: Changwei Ge <ge.changwei@h3c.com> Acked-by: Joseph Qi <jiangqi903@gmail.com> Acked-by: Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <ge.changwei@h3c.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-05ocfs2: fix crash in ocfs2_duplicate_clusters_by_page()Larry Chen
ocfs2_duplicate_clusters_by_page() may crash if one of the extent's pages is dirty. When a page has not been written back, it is still in dirty state. If ocfs2_duplicate_clusters_by_page() is called against the dirty page, the crash happens. To fix this bug, we can just unlock the page and wait until the page until its not dirty. The following is the backtrace: kernel BUG at /root/code/ocfs2/refcounttree.c:2961! [exception RIP: ocfs2_duplicate_clusters_by_page+822] __ocfs2_move_extent+0x80/0x450 [ocfs2] ? __ocfs2_claim_clusters+0x130/0x250 [ocfs2] ocfs2_defrag_extent+0x5b8/0x5e0 [ocfs2] __ocfs2_move_extents_range+0x2a4/0x470 [ocfs2] ocfs2_move_extents+0x180/0x3b0 [ocfs2] ? ocfs2_wait_for_recovery+0x13/0x70 [ocfs2] ocfs2_ioctl_move_extents+0x133/0x2d0 [ocfs2] ocfs2_ioctl+0x253/0x640 [ocfs2] do_vfs_ioctl+0x90/0x5f0 SyS_ioctl+0x74/0x80 do_syscall_64+0x74/0x140 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Once we find the page is dirty, we do not wait until it's clean, rather we use write_one_page() to write it back Link: http://lkml.kernel.org/r/20180829074740.9438-1-lchen@suse.com [lchen@suse.com: update comments] Link: http://lkml.kernel.org/r/20180830075041.14879-1-lchen@suse.com [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Larry Chen <lchen@suse.com> Acked-by: Changwei Ge <ge.changwei@h3c.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20ocfs2: fix ocfs2 read block panicJunxiao Bi
While reading block, it is possible that io error return due to underlying storage issue, in this case, BH_NeedsValidate was left in the buffer head. Then when reading the very block next time, if it was already linked into journal, that will trigger the following panic. [203748.702517] kernel BUG at fs/ocfs2/buffer_head_io.c:342! [203748.702533] invalid opcode: 0000 [#1] SMP [203748.702561] Modules linked in: ocfs2 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sunrpc dm_switch dm_queue_length dm_multipath bonding be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i iw_cxgb4 cxgb4 cxgb3i libcxgbi iw_cxgb3 cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_devintf iTCO_wdt iTCO_vendor_support dcdbas ipmi_ssif i2c_core ipmi_si ipmi_msghandler acpi_pad pcspkr sb_edac edac_core lpc_ich mfd_core shpchp sg tg3 ptp pps_core ext4 jbd2 mbcache2 sr_mod cdrom sd_mod ahci libahci megaraid_sas wmi dm_mirror dm_region_hash dm_log dm_mod [203748.703024] CPU: 7 PID: 38369 Comm: touch Not tainted 4.1.12-124.18.6.el6uek.x86_64 #2 [203748.703045] Hardware name: Dell Inc. PowerEdge R620/0PXXHP, BIOS 2.5.2 01/28/2015 [203748.703067] task: ffff880768139c00 ti: ffff88006ff48000 task.ti: ffff88006ff48000 [203748.703088] RIP: 0010:[<ffffffffa05e9f09>] [<ffffffffa05e9f09>] ocfs2_read_blocks+0x669/0x7f0 [ocfs2] [203748.703130] RSP: 0018:ffff88006ff4b818 EFLAGS: 00010206 [203748.703389] RAX: 0000000008620029 RBX: ffff88006ff4b910 RCX: 0000000000000000 [203748.703885] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00000000023079fe [203748.704382] RBP: ffff88006ff4b8d8 R08: 0000000000000000 R09: ffff8807578c25b0 [203748.704877] R10: 000000000f637376 R11: 000000003030322e R12: 0000000000000000 [203748.705373] R13: ffff88006ff4b910 R14: ffff880732fe38f0 R15: 0000000000000000 [203748.705871] FS: 00007f401992c700(0000) GS:ffff880bfebc0000(0000) knlGS:0000000000000000 [203748.706370] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [203748.706627] CR2: 00007f4019252440 CR3: 00000000a621e000 CR4: 0000000000060670 [203748.707124] Stack: [203748.707371] ffff88006ff4b828 ffffffffa0609f52 ffff88006ff4b838 0000000000000001 [203748.707885] 0000000000000000 0000000000000000 ffff880bf67c3800 ffffffffa05eca00 [203748.708399] 00000000023079ff ffffffff81c58b80 0000000000000000 0000000000000000 [203748.708915] Call Trace: [203748.709175] [<ffffffffa0609f52>] ? ocfs2_inode_cache_io_unlock+0x12/0x20 [ocfs2] [203748.709680] [<ffffffffa05eca00>] ? ocfs2_empty_dir_filldir+0x80/0x80 [ocfs2] [203748.710185] [<ffffffffa05ec0cb>] ocfs2_read_dir_block_direct+0x3b/0x200 [ocfs2] [203748.710691] [<ffffffffa05f0fbf>] ocfs2_prepare_dx_dir_for_insert.isra.57+0x19f/0xf60 [ocfs2] [203748.711204] [<ffffffffa065660f>] ? ocfs2_metadata_cache_io_unlock+0x1f/0x30 [ocfs2] [203748.711716] [<ffffffffa05f4f3a>] ocfs2_prepare_dir_for_insert+0x13a/0x890 [ocfs2] [203748.712227] [<ffffffffa05f442e>] ? ocfs2_check_dir_for_entry+0x8e/0x140 [ocfs2] [203748.712737] [<ffffffffa061b2f2>] ocfs2_mknod+0x4b2/0x1370 [ocfs2] [203748.713003] [<ffffffffa061c385>] ocfs2_create+0x65/0x170 [ocfs2] [203748.713263] [<ffffffff8121714b>] vfs_create+0xdb/0x150 [203748.713518] [<ffffffff8121b225>] do_last+0x815/0x1210 [203748.713772] [<ffffffff812192e9>] ? path_init+0xb9/0x450 [203748.714123] [<ffffffff8121bca0>] path_openat+0x80/0x600 [203748.714378] [<ffffffff811bcd45>] ? handle_pte_fault+0xd15/0x1620 [203748.714634] [<ffffffff8121d7ba>] do_filp_open+0x3a/0xb0 [203748.714888] [<ffffffff8122a767>] ? __alloc_fd+0xa7/0x130 [203748.715143] [<ffffffff81209ffc>] do_sys_open+0x12c/0x220 [203748.715403] [<ffffffff81026ddb>] ? syscall_trace_enter_phase1+0x11b/0x180 [203748.715668] [<ffffffff816f0c9f>] ? system_call_after_swapgs+0xe9/0x190 [203748.715928] [<ffffffff8120a10e>] SyS_open+0x1e/0x20 [203748.716184] [<ffffffff816f0d5e>] system_call_fastpath+0x18/0xd7 [203748.716440] Code: 00 00 48 8b 7b 08 48 83 c3 10 45 89 f8 44 89 e1 44 89 f2 4c 89 ee e8 07 06 11 e1 48 8b 03 48 85 c0 75 df 8b 5d c8 e9 4d fa ff ff <0f> 0b 48 8b 7d a0 e8 dc c6 06 00 48 b8 00 00 00 00 00 00 00 10 [203748.717505] RIP [<ffffffffa05e9f09>] ocfs2_read_blocks+0x669/0x7f0 [ocfs2] [203748.717775] RSP <ffff88006ff4b818> Joesph ever reported a similar panic. Link: https://oss.oracle.com/pipermail/ocfs2-devel/2013-May/008931.html Link: http://lkml.kernel.org/r/20180912063207.29484-1-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Changwei Ge <ge.changwei@h3c.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-21Merge tag 'ovl-update-4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs updates from Miklos Szeredi: "This contains two new features: - Stack file operations: this allows removal of several hacks from the VFS, proper interaction of read-only open files with copy-up, possibility to implement fs modifying ioctls properly, and others. - Metadata only copy-up: when file is on lower layer and only metadata is modified (except size) then only copy up the metadata and continue to use the data from the lower file" * tag 'ovl-update-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (66 commits) ovl: Enable metadata only feature ovl: Do not do metacopy only for ioctl modifying file attr ovl: Do not do metadata only copy-up for truncate operation ovl: add helper to force data copy-up ovl: Check redirect on index as well ovl: Set redirect on upper inode when it is linked ovl: Set redirect on metacopy files upon rename ovl: Do not set dentry type ORIGIN for broken hardlinks ovl: Add an inode flag OVL_CONST_INO ovl: Treat metacopy dentries as type OVL_PATH_MERGE ovl: Check redirects for metacopy files ovl: Move some dir related ovl_lookup_single() code in else block ovl: Do not expose metacopy only dentry from d_real() ovl: Open file with data except for the case of fsync ovl: Add helper ovl_inode_realdata() ovl: Store lower data inode in ovl_inode ovl: Fix ovl_getattr() to get number of blocks from lower ovl: Add helper ovl_dentry_lowerdata() to get lower data dentry ovl: Copy up meta inode data from lowest data inode ovl: Modify ovl_lookup() and friends to lookup metacopy dentry ...
2018-08-17ocfs2: make several functions and variables static (and some const)Colin Ian King
There are a variety of functions and variables that are local to the source and do not need to be in global scope, so make them static. Also make a couple of char arrays static const. Cleans up sparse warnings: symbol 'o2hb_heartbeat_mode_desc' was not declared. Should it be static? symbol 'o2hb_heartbeat_mode' was not declared. Should it be static? symbol 'o2hb_dependent_users' was not declared. Should it be static? symbol 'o2hb_region_dec_user' was not declared. Should it be static? symbol 'o2nm_fence_method_desc' was not declared. Should it be static? symbol 'lockdep_keys' was not declared. Should it be static? Link: http://lkml.kernel.org/r/20180628131659.12133-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17ocfs2: clean up some unnecessary codewangyan
Several functions have some unnecessary code, clean up these code. Link: http://lkml.kernel.org/r/5B14DF72.5020800@huawei.com Signed-off-by: Yan Wang <wangyan122@huawei.com> Reviewed-by: Jun Piao <piaojun@huawei.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17ocfs2: return -EROFS when filesystem becomes read-onlyJun Piao
We should return -EROFS rather than other errno if filesystem becomes read-only. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/5B191B26.9010501@huawei.com Signed-off-by: Jun Piao <piaojun@huawei.com> Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com> Acked-by: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-06vfs: dedupe: rationalize argsMiklos Szeredi
Clean up f_op->dedupe_file_range() interface. 1) Use loff_t for offsets and length instead of u64 2) Order the arguments the same way as {copy|clone}_file_range(). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-07-06vfs: dedupe: return intMiklos Szeredi
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-15Merge tag 'vfs-timespec64' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground Pull inode timestamps conversion to timespec64 from Arnd Bergmann: "This is a late set of changes from Deepa Dinamani doing an automated treewide conversion of the inode and iattr structures from 'timespec' to 'timespec64', to push the conversion from the VFS layer into the individual file systems. As Deepa writes: 'The series aims to switch vfs timestamps to use struct timespec64. Currently vfs uses struct timespec, which is not y2038 safe. The series involves the following: 1. Add vfs helper functions for supporting struct timepec64 timestamps. 2. Cast prints of vfs timestamps to avoid warnings after the switch. 3. Simplify code using vfs timestamps so that the actual replacement becomes easy. 4. Convert vfs timestamps to use struct timespec64 using a script. This is a flag day patch. Next steps: 1. Convert APIs that can handle timespec64, instead of converting timestamps at the boundaries. 2. Update internal data structures to avoid timestamp conversions' Thomas Gleixner adds: 'I think there is no point to drag that out for the next merge window. The whole thing needs to be done in one go for the core changes which means that you're going to play that catchup game forever. Let's get over with it towards the end of the merge window'" * tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground: pstore: Remove bogus format string definition vfs: change inode times to use struct timespec64 pstore: Convert internal records to timespec64 udf: Simplify calls to udf_disk_stamp_to_time fs: nfs: get rid of memcpys for inode times ceph: make inode time prints to be long long lustre: Use long long type to print inode time fs: add timespec64_truncate()
2018-06-14Merge branch 'vfs_timespec64' of https://github.com/deepa-hub/vfs into ↵Arnd Bergmann
vfs-timespec64 Pull the timespec64 conversion from Deepa Dinamani: "The series aims to switch vfs timestamps to use struct timespec64. Currently vfs uses struct timespec, which is not y2038 safe. The flag patch applies cleanly. I've not seen the timestamps update logic change often. The series applies cleanly on 4.17-rc6 and linux-next tip (top commit: next-20180517). I'm not sure how to merge this kind of a series with a flag patch. We are targeting 4.18 for this. Let me know if you have other suggestions. The series involves the following: 1. Add vfs helper functions for supporting struct timepec64 timestamps. 2. Cast prints of vfs timestamps to avoid warnings after the switch. 3. Simplify code using vfs timestamps so that the actual replacement becomes easy. 4. Convert vfs timestamps to use struct timespec64 using a script. This is a flag day patch. I've tried to keep the conversions with the script simple, to aid in the reviews. I've kept all the internal filesystem data structures and function signatures the same. Next steps: 1. Convert APIs that can handle timespec64, instead of converting timestamps at the boundaries. 2. Update internal data structures to avoid timestamp conversions." I've pulled it into a branch based on top of the NFS changes that are now in mainline, so I could resolve the non-obvious conflict between the two while merging. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-27 11:56:59 +0000