summaryrefslogtreecommitdiff
path: root/fs/utimes.c
AgeCommit message (Collapse)Author
2024-11-03fdget(), more trivial conversionsAl Viro
all failure exits prior to fdget() leave the scope, all matching fdput() are immediately followed by leaving the scope. [xfs_ioc_commit_range() chunk moved here as well] Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2024-08-12introduce fd_file(), convert all accessors to it.Al Viro
For any changes of struct fd representation we need to turn existing accesses to fields into calls of wrappers. Accesses to struct fd::flags are very few (3 in linux/file.h, 1 in net/socket.c, 3 in fs/overlayfs/file.c and 3 more in explicit initializers). Those can be dealt with in the commit converting to new layout; accesses to struct fd::file are too many for that. This commit converts (almost) all of f.file to fd_file(f). It's not entirely mechanical ('file' is used as a member name more than just in struct fd) and it does not even attempt to distinguish the uses in pointer context from those in boolean context; the latter will be eventually turned into a separate helper (fd_empty()). NOTE: mass conversion to fd_empty(), tempting as it might be, is a bad idea; better do that piecewise in commit that convert from fdget...() to CLASS(...). [conflicts in fs/fhandle.c, kernel/bpf/syscall.c, mm/memcontrol.c caught by git; fs/stat.c one got caught by git grep] [fs/xattr.c conflict] Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-02-20Merge tag 'fs.idmapped.v6.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping Pull vfs idmapping updates from Christian Brauner: - Last cycle we introduced the dedicated struct mnt_idmap type for mount idmapping and the required infrastucture in 256c8aed2b42 ("fs: introduce dedicated idmap type for mounts"). As promised in last cycle's pull request message this converts everything to rely on struct mnt_idmap. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate namespaces that are relevant on the filesystem with namespaces that are relevant on the mount level. Especially for non-vfs developers without detailed knowledge in this area this was a potential source for bugs. This finishes the conversion. Instead of passing the plain namespace around this updates all places that currently take a pointer to a mnt_userns with a pointer to struct mnt_idmap. Now that the conversion is done all helpers down to the really low-level helpers only accept a struct mnt_idmap argument instead of two namespace arguments. Conflating mount and other idmappings will now cause the compiler to complain loudly thus eliminating the possibility of any bugs. This makes it impossible for filesystem developers to mix up mount and filesystem idmappings as they are two distinct types and require distinct helpers that cannot be used interchangeably. Everything associated with struct mnt_idmap is moved into a single separate file. With that change no code can poke around in struct mnt_idmap. It can only be interacted with through dedicated helpers. That means all filesystems are and all of the vfs is completely oblivious to the actual implementation of idmappings. We are now also able to extend struct mnt_idmap as we see fit. For example, we can decouple it completely from namespaces for users that don't require or don't want to use them at all. We can also extend the concept of idmappings so we can cover filesystem specific requirements. In combination with the vfs{g,u}id_t work we finished in v6.2 this makes this feature substantially more robust and thus difficult to implement wrong by a given filesystem and also protects the vfs. - Enable idmapped mounts for tmpfs and fulfill a longstanding request. A long-standing request from users had been to make it possible to create idmapped mounts for tmpfs. For example, to share the host's tmpfs mount between multiple sandboxes. This is a prerequisite for some advanced Kubernetes cases. Systemd also has a range of use-cases to increase service isolation. And there are more users of this. However, with all of the other work going on this was way down on the priority list but luckily someone other than ourselves picked this up. As usual the patch is tiny as all the infrastructure work had been done multiple kernel releases ago. In addition to all the tests that we already have I requested that Rodrigo add a dedicated tmpfs testsuite for idmapped mounts to xfstests. It is to be included into xfstests during the v6.3 development cycle. This should add a slew of additional tests. * tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: (26 commits) shmem: support idmapped mounts for tmpfs fs: move mnt_idmap fs: port vfs{g,u}id helpers to mnt_idmap fs: port fs{g,u}id helpers to mnt_idmap fs: port i_{g,u}id_into_vfs{g,u}id() to mnt_idmap fs: port i_{g,u}id_{needs_}update() to mnt_idmap quota: port to mnt_idmap fs: port privilege checking helpers to mnt_idmap fs: port inode_owner_or_capable() to mnt_idmap fs: port inode_init_owner() to mnt_idmap fs: port acl to mnt_idmap fs: port xattr to mnt_idmap fs: port ->permission() to pass mnt_idmap fs: port ->fileattr_set() to pass mnt_idmap fs: port ->set_acl() to pass mnt_idmap fs: port ->get_acl() to pass mnt_idmap fs: port ->tmpfile() to pass mnt_idmap fs: port ->rename() to pass mnt_idmap fs: port ->mknod() to pass mnt_idmap fs: port ->mkdir() to pass mnt_idmap ...
2023-01-18fs: port vfs_*() helpers to struct mnt_idmapChristian Brauner
Convert to struct mnt_idmap. Last cycle we merged the necessary infrastructure in 256c8aed2b42 ("fs: introduce dedicated idmap type for mounts"). This is just the conversion to struct mnt_idmap. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate namespaces that are relevant on the filesystem with namespaces that are relevent on the mount level. Especially for non-vfs developers without detailed knowledge in this area this can be a potential source for bugs. Once the conversion to struct mnt_idmap is done all helpers down to the really low-level helpers will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two eliminating the possibility of any bugs. All of the vfs and all filesystems only operate on struct mnt_idmap. Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-11filelock: move file locking definitions to separate header fileJeff Layton
The file locking definitions have lived in fs.h since the dawn of time, but they are only used by a small subset of the source files that include it. Move the file locking definitions to a new header file, and add the appropriate #include directives to the source files that need them. By doing this we trim down fs.h a bit and limit the amount of rebuilding that has to be done when we make changes to the file locking APIs. Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Howells <dhowells@redhat.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com> Acked-by: Steve French <stfrench@microsoft.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Jeff Layton <jlayton@kernel.org>
2021-01-24utimes: handle idmapped mountsChristian Brauner
Enable the vfs_utimes() helper to handle idmapped mounts by passing down the mount's user namespace. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-19-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Morris <jamorris@linux.microsoft.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24attr: handle idmapped mountsChristian Brauner
When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-07-31fs: expose utimes_commonChristoph Hellwig
Rename utimes_common to vfs_utimes and make it available outside of utimes.c. This will be used by the initramfs unpacking code. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-31fs: move timespec validation into utimes_commonChristoph Hellwig
Consolidate the validation of the timespec from the two callers into utimes_common. That means it is done a little later (e.g. after the path lookup), but I can't find anything that requires a specific order of processing the errors. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-31fs: refactor do_utimesChristoph Hellwig
Split out one helper each for path vs fd based operations. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-14utimensat: AT_EMPTY_PATH supportMiklos Szeredi
This makes it possible to use utimensat on an O_PATH file (including symlinks). It supersedes the nonstandard utimensat(fd, NULL, ...) form. Cc: linux-api@vger.kernel.org Cc: linux-man@vger.kernel.org Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-12-08utimes: Clamp the timestamps in notify_change()Amir Goldstein
Push clamping timestamps into notify_change(), so in-kernel callers like nfsd and overlayfs will get similar timestamp set behavior as utimes. AV: get rid of clamping in ->setattr() instances; we don't need to bother with that there, with notify_change() doing normalization in all cases now (it already did for implicit case, since current_time() clamps). Suggested-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: 42e729b9ddbb ("utimes: Clamp the timestamps before update") Cc: stable@vger.kernel.org # v5.4 Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Jeff Layton <jlayton@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-11-15y2038: syscalls: change remaining timeval to __kernel_old_timevalArnd Bergmann
All of the remaining syscalls that pass a timeval (gettimeofday, utime, futimesat) can trivially be changed to pass a __kernel_old_timeval instead, which has a compatible layout, but avoids ambiguity with the timeval type in user space. Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-30utimes: Clamp the timestamps before updateDeepa Dinamani
POSIX is ambiguous on the behavior of timestamps for futimens, utimensat and utimes. Whether to return an error or silently clamp a timestamp beyond the range supported by the underlying filesystems is not clear. POSIX.1 section for futimens, utimensat and utimes says: (http://pubs.opengroup.org/onlinepubs/9699919799/functions/futimens.html) The file's relevant timestamp shall be set to the greatest value supported by the file system that is not greater than the specified time. If the tv_nsec field of a timespec structure has the special value UTIME_NOW, the file's relevant timestamp shall be set to the greatest value supported by the file system that is not greater than the current time. [EINVAL] A new file timestamp would be a value whose tv_sec component is not a value supported by the file system. The patch chooses to clamp the timestamps according to the filesystem timestamp ranges and does not return an error. This is in line with the behavior of utime syscall also since the POSIX page(http://pubs.opengroup.org/onlinepubs/009695399/functions/utime.html) for utime does not mention returning an error or clamping like above. Same for utimes http://pubs.opengroup.org/onlinepubs/009695399/functions/utimes.html Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: Jeff Layton <jlayton@kernel.org>
2019-02-07y2038: syscalls: rename y2038 compat syscallsArnd Bergmann
A lot of system calls that pass a time_t somewhere have an implementation using a COMPAT_SYSCALL_DEFINEx() on 64-bit architectures, and have been reworked so that this implementation can now be used on 32-bit architectures as well. The missing step is to redefine them using the regular SYSCALL_DEFINEx() to get them out of the compat namespace and make it possible to build them on 32-bit architectures. Any system call that ends in 'time' gets a '32' suffix on its name for that version, while the others get a '_time32' suffix, to distinguish them from the normal version, which takes a 64-bit time argument in the future. In this step, only 64-bit architectures are changed, doing this rename first lets us avoid touching the 32-bit architectures twice. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-08-29y2038: utimes: Rework #ifdef guards for compat syscallsArnd Bergmann
After changing over to 64-bit time_t syscalls, many architectures will want compat_sys_utimensat() but not respective handlers for utime(), utimes() and futimesat(). This adds a new __ARCH_WANT_SYS_UTIME32 to complement __ARCH_WANT_SYS_UTIME. For now, all 64-bit architectures that support CONFIG_COMPAT set it, but future 64-bit architectures will not (tile would not have needed it either, but got removed). As older 32-bit architectures get converted to using CONFIG_64BIT_TIME, they will have to use __ARCH_WANT_SYS_UTIME32 instead of __ARCH_WANT_SYS_UTIME. Architectures using the generic syscall ABI don't need either of them as they never had a utime syscall. Since the compat_utimbuf structure is now required outside of CONFIG_COMPAT, I'm moving it into compat_time.h. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- changed from last version: - renamed __ARCH_WANT_COMPAT_SYS_UTIME to __ARCH_WANT_SYS_UTIME32
2018-08-29y2038: Compile utimes()/futimesat() conditionallyArnd Bergmann
There are four generations of utimes() syscalls: utime(), utimes(), futimesat() and utimensat(), each one being a superset of the previous one. For y2038 support, we have to add another one, which is the same as the existing utimensat() but always passes 64-bit times_t based timespec values. There are currently 10 architectures that only use utimensat(), two that use utimes(), futimesat() and utimensat() but not utime(), and 11 architectures that have all four, and those define __ARCH_WANT_SYS_UTIME in order to get a sys_utime implementation. Since all the new architectures only want utimensat(), moving all the legacy entry points into a common __ARCH_WANT_SYS_UTIME guard simplifies the logic. Only alpha and ia64 grow a tiny bit as they now also get an unused sys_utime(), but it didn't seem worth the extra complexity of adding yet another ifdef for those. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-08-29y2038: Change sys_utimensat() to use __kernel_timespecArnd Bergmann
When 32-bit architectures get changed to support 64-bit time_t, utimensat() needs to use the new __kernel_timespec structure as its argument. The older utime(), utimes() and futimesat() system calls don't need a corresponding change as they are no longer used on C libraries that have 64-bit time support. As we do for the other syscalls that have timespec arguments, we reuse the 'compat' syscall entry points to implement the traditional four interfaces, and only leave the new utimensat() as a native handler, so that the same code gets used on both 32-bit and 64-bit kernels on each syscall. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-08-27y2038: globally rename compat_time to old_time32Arnd Bergmann
Christoph Hellwig suggested a slightly different path for handling backwards compatibility with the 32-bit time_t based system calls: Rather than simply reusing the compat_sys_* entry points on 32-bit architectures unchanged, we get rid of those entry points and the compat_time types by renaming them to something that makes more sense on 32-bit architectures (which don't have a compat mode otherwise), and then share the entry points under the new name with the 64-bit architectures that use them for implementing the compatibility. The following types and interfaces are renamed here, and moved from linux/compat_time.h to linux/time32.h: old new --- --- compat_time_t old_time32_t struct compat_timeval struct old_timeval32 struct compat_timespec struct old_timespec32 struct compat_itimerspec struct old_itimerspec32 ns_to_compat_timeval() ns_to_old_timeval32() get_compat_itimerspec64() get_old_itimerspec32() put_compat_itimerspec64() put_old_itimerspec32() compat_get_timespec64() get_old_timespec32() compat_put_timespec64() put_old_timespec32() As we already have aliases in place, this patch addresses only the instances that are relevant to the system call interface in particular, not those that occur in device drivers and other modules. Those will get handled separately, while providing the 64-bit version of the respective interfaces. I'm not renaming the timex, rusage and itimerval structures, as we are still debating what the new interface will look like, and whether we will need a replacement at all. This also doesn't change the names of the syscall entry points, which can be done more easily when we actually switch over the 32-bit architectures to use them, at that point we need to change COMPAT_SYSCALL_DEFINEx to SYSCALL_DEFINEx with a new name, e.g. with a _time32 suffix. Suggested-by: Christoph Hellwig <hch@infradead.org> Link: https://lore.kernel.org/lkml/20180705222110.GA5698@infradead.org/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-04-02fs: add do_compat_futimesat() helper; remove in-kernel call to compat syscallDominik Brodowski
Using the fs-internal do_compat_futimesat() helper allows us to get rid of the fs-internal call to the compat_sys_futimesat() syscall. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add do_futimesat() helper; remove internal call to sys_futimesat()Dominik Brodowski
Using this helper removes the in-kernel call to the sys_futimesat() syscall. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-03utimes: Make utimes y2038 safeDeepa Dinamani
struct timespec is not y2038 safe on 32 bit machines. Replace timespec with y2038 safe struct timespec64. Note that the patch only changes the internals without modifying the syscall interfaces. This will be part of a separate series. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-17utimes: move compat syscalls from compat.cAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-05vfs: misc struct path constificationAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-10-08Merge remote-tracking branch 'jk/vfs' into work.miscAl Viro
2016-09-22fs: Give dentry to inode_change_ok() instead of inodeJan Kara
inode_change_ok() will be resposible for clearing capabilities and IMA extended attributes and as such will need dentry. Give it as an argument to inode_change_ok() instead of an inode. Also rename inode_change_ok() to setattr_prepare() to better relect that it does also some modifications in addition to checks. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2016-09-16vfs: move permission checking into notify_change() for utimes(NULL)Miklos Szeredi
This fixes a bug where the permission was not properly checked in overlayfs. The testcase is ltp/utimensat01. It is also cleaner and safer to do the permission checking in the vfs helper instead of the caller. This patch introduces an additional ia_valid flag ATTR_TOUCH (since touch(1) is the most obvious user of utimes(NULL)) that is passed into notify_change whenever the conditions for this special permission checking mode are met. Reported-by: Aihua Zhang <zhangaihua1@huawei.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Tested-by: Aihua Zhang <zhangaihua1@huawei.com> Cc: <stable@vger.kernel.org> # v3.18+
2016-08-07fs: return EPERM on immutable inodeEryu Guan
In most cases, EPERM is returned on immutable inode, and there're only a few places returning EACCES. I noticed this when running LTP on overlayfs, setxattr03 failed due to unexpected EACCES on immutable inode. So converting all EACCES to EPERM on immutable inode. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eryu Guan <guaneryu@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-22wrappers for ->i_mutex accessAl Viro
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-11-09locks: break delegations on any attribute modificationJ. Bruce Fields
NFSv4 uses leases to guarantee that clients can cache metadata as well as data. Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: David Howells <dhowells@redhat.com> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Dustin Kirkland <dustin.kirkland@gazzang.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-20vfs: allow utimensat() calls to retry once on an ESTALE errorJeff Layton
Clearly, we can't handle the NULL filename case, but we can deal with the case where there's a real pathname. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-26switch simple cases of fget_light to fdgetAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-29switch utimes() to fget_light/fput_lightAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-23userns: rename is_owner_or_cap to inode_owner_or_capableSerge E. Hallyn
And give it a kernel-doc comment. [akpm@linux-foundation.org: btrfs changed in linux-next] Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Daniel Lezcano <daniel.lezcano@free.fr> Acked-by: David Howells <dhowells@redhat.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-13Mark arguments to certain syscalls as being constDavid Howells
Mark arguments to certain system calls as being const where they should be but aren't. The list includes: (*) The filename arguments of various stat syscalls, execve(), various utimes syscalls and some mount syscalls. (*) The filename arguments of some syscall helpers relating to the above. (*) The buffer argument of various write syscalls. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-14[CVE-2009-0029] System call wrappers part 30Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14[CVE-2009-0029] System call wrappers part 19Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-07-26[PATCH] sanitize __user_walk_fd() et.al.Al Viro
* do not pass nameidata; struct path is all the callers want. * switch to new helpers: user_path_at(dfd, pathname, flags, &path) user_path(pathname, &path) user_lpath(pathname, &path) user_path_dir(pathname, &path) (fail if not a directory) The last 3 are trivial macro wrappers for the first one. * remove nameidata in callers. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-26[PATCH] kill nameidata passing to permission(), rename to inode_permission()Al Viro
Incidentally, the name that gives hundreds of false positives on grep is not a good idea... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-26[patch 4/4] vfs: immutable inode checking cleanupMiklos Szeredi
Move the immutable and append-only checks from chmod, chown and utimes into notify_change(). Checks for immutable and append-only files are always performed by the VFS and not by the filesystem (see permission() and may_...() in namei.c), so these belong in notify_change(), and not in inode_change_ok(). This should be completely equivalent. CC: Ulrich Drepper <drepper@redhat.com> CC: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-26[patch 2/4] vfs: utimes cleanupMiklos Szeredi
Untange the mess that is do_utimes(). Add kerneldoc comment to do_utimes(). CC: Ulrich Drepper <drepper@redhat.com> CC: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-26[patch 1/4] vfs: utimes: move owner check into inode_change_ok()Miklos Szeredi
Add a new ia_valid flag: ATTR_TIMES_SET, to handle the UTIMES_OMIT/UTIMES_NOW and UTIMES_NOW/UTIMES_OMIT cases. In these cases neither ATTR_MTIME_SET nor ATTR_ATIME_SET is in the flags, yet the POSIX draft specifies that permission checking is performed the same way as if one or both of the times was explicitly set to a timestamp. See the path "vfs: utimensat(): fix error checking for {UTIME_NOW,UTIME_OMIT} case" by Michael Kerrisk for the patch introducing this behavior. This is a cleanup, as well as allowing filesystems (NFS/fuse/...) to perform their own permission checking instead of the default. CC: Ulrich Drepper <drepper@redhat.com> CC: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-06-23[patch for 2.6.26 4/4] vfs: utimensat(): fix write access check for futimens()Michael Kerrisk
The POSIX.1 draft spec for futimens()/utimensat() says: Only a process with the effective user ID equal to the user ID of the file, *or with write access to the file*, or with appropriate privileges may use futimens() or utimensat() with a null pointer as the times argument or with both tv_nsec fields set to the special value UTIME_NOW. The important piece here is "with write access to the file", and this matters for futimens(), which deals with an argument that is a file descriptor referring to the file whose timestamps are being updated, The standard is saying that the "writability" check is based on the file permissions, not the access mode with which the file is opened. (This behavior is consistent with the semantics of FreeBSD's futimes().) However, Linux is currently doing the latter -- futimens(fd, times) is a library function implemented as utimensat(fd, NULL, times, 0) and within the utimensat() implementation we have the code: f = fget(dfd); // dfd is 'fd' ... if (f) { if (!(f->f_mode & FMODE_WRITE)) goto mnt_drop_write_and_out; The check should instead be based on the file permissions. Thanks to Miklos for pointing out how to do this check. Miklos also pointed out a simplification that could be made to my first version of this patch, since the checks for the pathname and file descriptor cases can now be conflated. Acked-by: Miklos Szeredi <miklos@szeredi.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-06-23[patch for 2.6.26 3/4] vfs: utimensat(): fix error checking for ↵Michael Kerrisk
{UTIME_NOW,UTIME_OMIT} case The POSIX.1 draft spec for utimensat() says: Only a process with the effective user ID equal to the user ID of the file or with appropriate privileges may use futimens() or utimensat() with a non-null times argument that does not have both tv_nsec fields set to UTIME_NOW and does not have both tv_nsec fields set to UTIME_OMIT. If this condition is violated, then the error EPERM should result. However, the current implementation does not generate EPERM if one tv_nsec field is UTIME_NOW while the other is UTIME_OMIT. It should give this error for that case. This patch: a) Repairs that problem. b) Removes the now unneeded nsec_special() helper function. c) Adds some comments to explain the checks that are being performed. Thanks to Miklos, who provided comments on the previous iteration of this patch. As a result, this version is a little simpler and and its logic is better structured. Miklos suggested an alternative idea, migrating the is_owner_or_cap() checks into fs/attr.c:inode_change_ok() via the use of an ATTR_OWNER_CHECK flag. Maybe we could do that later, but for now I've gone with this version, which is IMO simpler, and can be more easily read as being correct. Acked-by: Miklos Szeredi <miklos@szeredi.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-06-23[patch for 2.6.26 1/4] vfs: utimensat(): ignore tv_sec if tv_nsec == ↵Michael Kerrisk
UTIME_OMIT or UTIME_NOW The POSIX.1 draft spec for utimensat() says that if a times[n].tv_nsec field is UTIME_OMIT or UTIME_NOW, then the value in the corresponding tv_sec field is ignored. See the last sentence of this para, from the spec: If the tv_nsec field of a timespec structure has the special value UTIME_NOW, the file's relevant timestamp shall be set to the greatest value supported by the file system that is not greater than the current time. If the tv_nsec field has the special value UTIME_OMIT, the file's relevant timestamp shall not be changed. In either case, the tv_sec field shall be ignored. However the current Linux implementation requires the tv_sec value to be zero (or the EINVAL error results). This requirement should be removed. Acked-by: Miklos Szeredi <miklos@szeredi.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-06-23[patch for 2.6.26 2/4] vfs: utimensat(): be consistent with utime() for ↵Michael Kerrisk
immutable and append-only files This patch fixes utimensat() to make its behavior consistent with that of utime()/utimes() when dealing with files marked immutable and append-only. The current utimensat() implementation also returns EPERM if 'times' is non-NULL and the tv_nsec fields are both UTIME_NOW. For consistency, the (times != NULL && times[0].tv_nsec == UTIME_NOW && times[1].tv_nsec == UTIME_NOW) case should be treated like the traditional utimes() case where 'times' is NULL. That is, the call should succeed for a file marked append-only and should give the error EACCES if the file is marked as immutable. The simple way to do this is to set 'times' to NULL if (times[0].tv_nsec == UTIME_NOW && times[1].tv_nsec == UTIME_NOW). This is also the natural approach, since POSIX.1 semantics consider the times == {{x, UTIME_NOW}, {y, UTIME_NOW}} to be exactly equivalent to the case for times == NULL. (Thanks to Miklos for pointing this out.) Patch 3 in this series relies on the simplification provided by this patch. Acked-by: Miklos Szeredi <miklos@szeredi.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-05-01vfs: fix permission checking in sys_utimensatMiklos Szeredi
If utimensat() is called with both times set to UTIME_NOW or one of them to UTIME_NOW and the other to UTIME_OMIT, then it will update the file time without any permission checking. I don't think this can be used for anything other than a local DoS, but could be quite bewildering at that (e.g. "Why was that large source tree rebuilt when I didn't modify anything???") This affects all kernels from 2.6.22, when the utimensat() syscall was introduced. Fix by doing the same permission checking as for the "times == NULL" case. Thanks to Michael Kerrisk, whose utimensat-non-conformances-and-fixes.patch in -mm also fixes this (and breaks other stuff), only he didn't realize the security implications of this bug. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Ulrich Drepper <drepper@redhat.com> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-19[PATCH] r/o bind mounts: elevate write count for do_utimes()Dave Hansen
Now includes fix for oops seen by akpm. "never let a libc developer write your kernel code" - hch "nor, apparently, a kernel developer" - akpm Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>