| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm update from David Teigland:
"This includes a single patch to avoid fully processing a posix unlock
from close when no posix locks exist on the file"
* tag 'dlm-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: avoid unnecessary posix unlock
|
|
Pull NFS client bugfixes and cleanups from Trond Myklebust:
- NLM: stable fix for NFSv2/v3 blocking locks
- NFSv4.x: stable fixes for the delegation recall error handling code
- NFSv4.x: Security flavour negotiation fixes and cleanups by Chuck
Lever
- SUNRPC: A number of RPCSEC_GSS fixes and cleanups also from Chuck
- NFSv4.x assorted state management and reboot recovery bugfixes
- NFSv4.1: In cases where we have already looked up a file, and hold a
valid filehandle, use the new open-by-filehandle operation instead of
opening by name.
- Allow the NFSv4.1 callback thread to freeze
- NFSv4.x: ensure that file unlock waits for readahead to complete
- NFSv4.1: ensure that the RPC layer doesn't override the NFS session
table size negotiation by limiting the number of slots.
- NFSv4.x: Fix SETATTR spec compatibility issues
* tag 'nfs-for-3.10-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (67 commits)
NFSv4: Warn once about servers that incorrectly apply open mode to setattr
NFSv4: Servers should only check SETATTR stateid open mode on size change
NFSv4: Don't recheck permissions on open in case of recovery cached open
NFSv4.1: Don't do a delegated open for NFS4_OPEN_CLAIM_DELEG_CUR_FH modes
NFSv4.1: Use the more efficient open_noattr call for open-by-filehandle
NFS: Retry SETCLIENTID with AUTH_SYS instead of AUTH_NONE
NFSv4: Ensure that we clear the NFS_OPEN_STATE flag when appropriate
LOCKD: Ensure that nlmclnt_block resets block->b_status after a server reboot
NFSv4: Ensure the LOCK call cannot use the delegation stateid
NFSv4: Use the open stateid if the delegation has the wrong mode
nfs: Send atime and mtime as a 64bit value
NFSv4: Record the OPEN create mode used in the nfs4_opendata structure
NFSv4.1: Set the RPC_CLNT_CREATE_INFINITE_SLOTS flag for NFSv4.1 transports
SUNRPC: Allow rpc_create() to request that TCP slots be unlimited
SUNRPC: Fix a livelock problem in the xprt->backlog queue
NFSv4: Fix handling of revoked delegations by setattr
NFSv4 release the sequence id in the return on close case
nfs: remove unnecessary check for NULL inode->i_flock from nfs_delegation_claim_locks
NFS: Ensure that NFS file unlock waits for readahead to complete
NFS: Add functionality to allow waiting on all outstanding reads to complete
...
|
|
Pull GFS2 updates from Steven Whitehouse:
"There is not a whole lot of change this time - there are some further
changes which are in the works, but those will be held over until next
time.
Here there are some clean ups to inode creation, the addition of an
origin (local or remote) indicator to glock demote requests, removal
of one of the remaining GFP_NOFAIL allocations during log flushes, one
minor clean up, and a one liner bug fix."
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
GFS2: Flush work queue before clearing glock hash tables
GFS2: Add origin indicator to glock demote tracing
GFS2: Add origin indicator to glock callbacks
GFS2: replace gfs2_ail structure with gfs2_trans
GFS2: Remove vestigial parameter ip from function rs_deltree
GFS2: Use gfs2_dinode_out() in the inode create path
GFS2: Remove gfs2_refresh_inode from inode creation path
GFS2: Clean up inode creation path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
"Usual stuff, mostly comment fixes, typo fixes, printk fixes and small
code cleanups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (45 commits)
mm: Convert print_symbol to %pSR
gfs2: Convert print_symbol to %pSR
m32r: Convert print_symbol to %pSR
iostats.txt: add easy-to-find description for field 6
x86 cmpxchg.h: fix wrong comment
treewide: Fix typo in printk and comments
doc: devicetree: Fix various typos
docbook: fix 8250 naming in device-drivers
pata_pdc2027x: Fix compiler warning
treewide: Fix typo in printks
mei: Fix comments in drivers/misc/mei
treewide: Fix typos in kernel messages
pm44xx: Fix comment for "CONFIG_CPU_IDLE"
doc: Fix typo "CONFIG_CGROUP_CGROUP_MEMCG_SWAP"
mmzone: correct "pags" to "pages" in comment.
kernel-parameters: remove outdated 'noresidual' parameter
Remove spurious _H suffixes from ifdef comments
sound: Remove stray pluses from Kconfig file
radio-shark: Fix printk "CONFIG_LED_CLASS"
doc: put proper reference to CONFIG_MODULE_SIG_ENFORCE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core timer updates from Ingo Molnar:
"The main changes in this cycle's merge are:
- Implement shadow timekeeper to shorten in kernel reader side
blocking, by Thomas Gleixner.
- Posix timers enhancements by Pavel Emelyanov:
- allocate timer ID per process, so that exact timer ID allocations
can be re-created be checkpoint/restore code.
- debuggability and tooling (/proc/PID/timers, etc.) improvements.
- suspend/resume enhancements by Feng Tang: on certain new Intel Atom
processors (Penwell and Cloverview), there is a feature that the
TSC won't stop in S3 state, so the TSC value won't be reset to 0
after resume. This can be taken advantage of by the generic via
the CLOCK_SOURCE_SUSPEND_NONSTOP flag: instead of using the RTC to
recover/approximate sleep time, the main (and precise) clocksource
can be used.
- Fix /proc/timer_list for 4096 CPUs by Nathan Zimmer: on so many
CPUs the file goes beyond 4MB of size and thus the current
simplistic seqfile approach fails. Convert /proc/timer_list to a
proper seq_file with its own iterator.
- Cleanups and refactorings of the core timekeeping code by John
Stultz.
- International Atomic Clock time is managed by the NTP code
internally currently but not exposed externally. Separate the TAI
code out and add CLOCK_TAI support and TAI support to the hrtimer
and posix-timer code, by John Stultz.
- Add deep idle support enhacement to the broadcast clockevents core
timer code, by Daniel Lezcano: add an opt-in CLOCK_EVT_FEAT_DYNIRQ
clockevents feature (which will be utilized by future clockevents
driver updates), which allows the use of IRQ affinities to avoid
spurious wakeups of idle CPUs - the right CPU with an expiring
timer will be woken.
- Add new ARM bcm281xx clocksource driver, by Christian Daudt
- ... various other fixes and cleanups"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
clockevents: Set dummy handler on CPU_DEAD shutdown
timekeeping: Update tk->cycle_last in resume
posix-timers: Remove unused variable
clockevents: Switch into oneshot mode even if broadcast registered late
timer_list: Convert timer list to be a proper seq_file
timer_list: Split timer_list_show_tickdevices
posix-timers: Show sigevent info in proc file
posix-timers: Introduce /proc/PID/timers file
posix timers: Allocate timer id per process (v2)
timekeeping: Make sure to notify hrtimers when TAI offset changes
hrtimer: Fix ktime_add_ns() overflow on 32bit architectures
hrtimer: Add expiry time overflow check in hrtimer_interrupt
timekeeping: Shorten seq_count region
timekeeping: Implement a shadow timekeeper
timekeeping: Delay update of clock->cycle_last
timekeeping: Store cycle_last value in timekeeper struct as well
ntp: Remove ntp_lock, using the timekeeping locks to protect ntp state
timekeeping: Simplify tai updating from do_adjtimex
timekeeping: Hold timekeepering locks in do_adjtimex and hardpps
timekeeping: Move ADJ_SETOFFSET to top level do_adjtimex()
...
|
|
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: John McCutchan <john@johnmccutchan.com>
Cc: Robert Love <rlove@rlove.org>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch enables rebuilding of directory inodes which are not present in
the cache.This is done by traversing the disk clusters to find the
directory entry of the parent directory and using its i_pos to build the
inode.
The traversal is done by fat_scan_logstart() which is similar to
fat_scan() but matches i_pos values instead of names.fat_scan_logstart()
needs an inode parameter to work, for which a dummy inode is created by
it's caller fat_rebuild_parent(). This dummy inode is destroyed after the
traversal completes.
All this is done only if the nostale_ro nfs mount option is specified.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ravishankar N <ravi.n1@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If the cache lookups fail,use the i_pos value to find the directory entry
of the inode and rebuild the inode.Since this involves accessing the FAT
media, do this only if the nostale_ro nfs mount option is specified.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ravishankar N <ravi.n1@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Define two nfs export_operation structures,one for 'stale_rw' mounts and
the other for 'nostale_ro'. The latter uses i_pos as a basis for encoding
and decoding file handles.
Also, assign i_pos to kstat->ino. The logic for rebuilding the inode is
added in the subsequent patches.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ravishankar N <ravi.n1@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Introduce helper function to get the block number and offset for a given
i_pos value. Use it in __fat_write_inode() now and later on in nfs.c
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ravishankar N <ravi.n1@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Move fat_i_pos_read to fat.h so that it can be called from nfs.c in the
subsequent patches to encode the file handle.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ravishankar N <ravi.n1@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patchset eliminates the client side ESTALE errors when a FAT
partition exported over NFS has its dentries evicted from the cache. The
idea is to find the on-disk location_'i_pos' of the dirent of the inode
that has been evicted and use it to rebuild the inode.
This patch:
Provide two possible values 'stale_rw' and 'nostale_ro' for the -o nfs
mount option.The first one allows all file operations but does not reduce
ESTALE errors on memory constrained systems. The second one eliminates
ESTALE errors but mounts the filesystem as read-only. Not specifying a
value defaults to 'stale_rw'.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ravishankar N <ravi.n1@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
bh allocation uses kmem_cache_zalloc() so we needn't call
'init_buffer(bh, NULL, NULL)' and perform other set-zero-operations.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Saves an ifdef, no code size changes
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On architectures where a pgd entry may be shared between user and kernel
(e.g. ARM+LPAE), freeing page tables needs a ceiling other than 0.
This patch introduces a generic USER_PGTABLES_CEILING that arch code can
override. It is the responsibility of the arch code setting the ceiling
to ensure the complete freeing of the page tables (usually in
pgd_free()).
[catalin.marinas@arm.com: commit log; shift_arg_pages(), asm-generic/pgtables.h changes]
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: <stable@vger.kernel.org> [3.3+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Now get_vmalloc_info() is in fs/proc/mmu.c. There is no reason that this
code must be here and it's implementation needs vmlist_lock and it iterate
a vmlist which may be internal data structure for vmalloc.
It is preferable that vmlist_lock and vmlist is only used in vmalloc.c
for maintainability. So move the code to vmalloc.c
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Dave Anderson <anderson@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Walking a bio's page mappings has proved problematic, so create a new
bio flag to indicate that a bio's data needs to be snapshotted in order
to guarantee stable pages during writeback. Next, for the one user
(ext3/jbd) of snapshotting, hook all the places where writes can be
initiated without PG_writeback set, and set BIO_SNAP_STABLE there.
We must also flag journal "metadata" bios for stable writeout, since
file data can be written through the journal. Finally, the
MS_SNAP_STABLE mount flag (only used by ext3) is now superfluous, so get
rid of it.
[akpm@linux-foundation.org: rename _submit_bh()'s `flags' to `bio_flags', delobotomize the _submit_bh declaration]
[akpm@linux-foundation.org: teeny cleanup]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
drop_caches.c provides code only invokable via sysctl, so don't compile it
in when CONFIG_SYSCTL=n.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently, dio_send_cur_page() submits bio before current page and cached
sdio->cur_page is added to the bio if sdio->boundary is set. This is
actually wrong because sdio->boundary means the current buffer is the last
one before metadata needs to be read. So we should rather submit the bio
after the current page is added to it.
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Tested-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When we read/write a file sequentially, we will read/write not only the
data blocks but also the indirect blocks that may not be physically
adjacent to the data blocks. So filesystems set the BH_Boundary flag to
submit the previous I/O before reading/writing an indirect block.
However the generic direct IO code mishandles buffer_boundary(), setting
sdio->boundary before each submit_page_section() call which results in
sending only one page bios as underlying code thinks this page is the last
in the contiguous extent. So fix the problem by setting sdio->boundary
only if the current page is really the last one in the mapped extent.
With this patch and "direct-io: submit bio after boundary buffer is added
to it" I've measured about 10% throughput improvement of direct IO reads
on ext3 with SATA harddrive (from 90 MB/s to 100 MB/s). With ramdisk, the
improvement was about 3-fold (from 350 MB/s to 1.2 GB/s). For other
filesystems (such as ext4), the improvements won't be as visible because
the frequency of BH_Boundary flag being set is much smaller.
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Tested-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit ef3d0fd27e90 ("vfs: do (nearly) lockless generic_file_llseek")
has removed i_mutex from generic_file_llseek, so update the comment
accordingly.
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
kfree on a NULL pointer is a no-op. Remove the redundant null pointer
check.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We can't dereference "bg" before it has been assigned. GCC should have
warned about this but "bg" was initialized to NULL. I've fixed that as
well.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Smatch complains that if we hit an error (for example if the file is
immutable) then "range" has uninitialized stack data and we copy it to
the user.
I've re-written the error handling to avoid this problem and make it a
little cleaner as well.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix to return a negative error code from the error handling case instead
of 0, as returned elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is no need to start the inode update transactions before/while
verifying the input flags. As a refinement, this patch delay the
transactions utill the pre-check up is ok.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is a kernel memory leak observed when the proc file
/proc/fs/fscache/stats is read.
The reason is that in fscache_stats_open, single_open is called and the
respective release function is not called during release. Hence fix
with correct release function - single_release().
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=57101
Signed-off-by: Anurup m <anurup.m@huawei.com>
Cc: shyju pv <shyju.pv@huawei.com>
Cc: Sanil kumar <sanil.kumar@huawei.com>
Cc: Nataraj m <nataraj.m@huawei.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core update from Greg Kroah-Hartman:
"Here's the merge request for the driver core tree for 3.10-rc1
It's pretty small, just a number of driver core and sysfs updates and
fixes, all of which have been in linux-next for a while now.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
Fixed conflict in kernel/rtmutex-tester.c, the locking tree had a better
fix for the same sysfs file mode problem.
* tag 'driver-core-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
PM / Runtime: Idle devices asynchronously after probe|release
driver core: handle user namespaces properly with the uid/gid devtmpfs change
driver core: devtmpfs: fix compile failure with CONFIG_UIDGID_STRICT_TYPE_CHECKS
devtmpfs: add base.h include
driver core: add uid and gid to devtmpfs
sysfs: check if one entry has been removed before freeing
sysfs: fix crash_notes_size build warning
sysfs: fix use after free in case of concurrent read/write and readdir
rtmutex-tester: fix mode of sysfs files
Documentation: Add ABI entry for crash_notes and crash_notes_size
sysfs: Add crash_notes_size to export percpu note size
driver core: platform_device.h: fix checkpatch errors and warnings
driver core: platform.c: fix checkpatch errors and warnings
driver core: warn that platform_driver_probe can not use deferred probing
sysfs: use atomic_inc_unless_negative in sysfs_get_active
base: core: WARN() about bogus permissions on device attributes
device: separate all subsys mutexes
|
|
Debugging aid to help identify servers that incorrectly apply open mode
checks to setattr requests that are not changing the file size.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The NFSv4 and NFSv4.1 specs are both clear that the server should only check
stateid open mode if a SETATTR specifies the size attribute. If the
open mode is not one that allows writing, then it returns NFS4ERR_OPENMODE.
In the case where the SETATTR is not changing the size, the client will
still pass it the delegation stateid to ensure that the server does not
recall that delegation. In that case, the server should _ignore_ the
delegation open mode, and simply apply standard permission checks.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Use the new vsprintf extension to avoid any possible
message interleaving.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
dprintk() shouldn't access @ring after it's unmapped.
Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There was a timing window when a GFS2 file system was unmounted
that caused GFS2 to call BUG() and panic the kernel. The call
to BUG() is meant to ensure that the glock reference count,
gl_ref, never gets down to zero and bounce back up again. What was
happening during umount is that function gfs2_put_super was dequeing
its glocks for well-known files. In particular, we saw it on the
journal glock, sd_jinode_gh. The dequeue caused delayed work to be
queued for the glock state machine, to transition the lock to an
"unlocked" state. While the work was still queued, gfs2_put_super
called gfs2_gl_hash_clear to clear out the glock hash tables.
If the timing was just so, the glock work function would drop the
reference count at the time when it was being checked for zero,
and that caused BUG() to be called. This patch calls
flush_workqueue before clearing the glock hash tables, thereby
ensuring that the delayed work is executed before the hash tables
are cleared, and therefore the reference count never goes to zero
until the glock is cleared.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Reason: Get upstream fixes before adding conflicting code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Fix up a conflict between the linux-next branch and mainline.
Conflicts:
fs/nfs/nfs4proc.c
|
|
* rpcsec_gss-from_cel: (21 commits)
NFS: Retry SETCLIENTID with AUTH_SYS instead of AUTH_NONE
NFSv4: Don't clear the machine cred when client establish returns EACCES
NFSv4: Fix issues in nfs4_discover_server_trunking
NFSv4: Fix the fallback to AUTH_NULL if krb5i is not available
NFS: Use server-recommended security flavor by default (NFSv3)
SUNRPC: Don't recognize RPC_AUTH_MAXFLAVOR
NFS: Use "krb5i" to establish NFSv4 state whenever possible
NFS: Try AUTH_UNIX when PUTROOTFH gets NFS4ERR_WRONGSEC
NFS: Use static list of security flavors during root FH lookup recovery
NFS: Avoid PUTROOTFH when managing leases
NFS: Clean up nfs4_proc_get_rootfh
NFS: Handle missing rpc.gssd when looking up root FH
SUNRPC: Remove EXPORT_SYMBOL_GPL() from GSS mech switch
SUNRPC: Make gss_mech_get() static
SUNRPC: Refactor nfsd4_do_encode_secinfo()
SUNRPC: Consider qop when looking up pseudoflavors
SUNRPC: Load GSS kernel module by OID
SUNRPC: Introduce rpcauth_get_pseudoflavor()
SUNRPC: Define rpcsec_gss_info structure
NFS: Remove unneeded forward declaration
...
|
|
If we already checked the user access permissions on the original open,
then don't bother checking again on recovery. Doing so can cause a
deadlock with NFSv4.1, since the may_open() operation is not privileged.
Furthermore, we can't report an access permission failure here anyway.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
If we're in a delegation recall situation, we can't do a delegated open.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
When we're doing open-by-filehandle in NFSv4.1, we shouldn't need to
do the cache consistency revalidation on the directory. It is
therefore more efficient to just use open_noattr, which returns the
file attributes, but not the directory attributes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Recently I changed the SETCLIENTID code to use AUTH_GSS(krb5i), and
then retry with AUTH_NONE if that didn't work. This was to enable
Kerberos NFS mounts to work without forcing Linux NFS clients to
have a keytab on hand.
Rick Macklem reports that the FreeBSD server accepts AUTH_NONE only
for NULL operations (thus certainly not for SETCLIENTID). Falling
back to AUTH_NONE means our proposed 3.10 NFS client will not
interoperate with FreeBSD servers over NFSv4 unless Kerberos is
fully configured on both ends.
If the Linux client falls back to using AUTH_SYS instead for
SETCLIENTID, all should work fine as long as the NFS server is
configured to allow AUTH_SYS for SETCLIENTID.
This may still prevent access to Kerberos-only FreeBSD servers by
Linux clients with no keytab. Rick is of the opinion that the
security settings the server applies to its pseudo-fs should also
apply to the SETCLIENTID operation.
Linux and Solaris NFS servers do not place that limitation on
SETCLIENTID. The security settings for the server's pseudo-fs are
determined automatically as the union of security flavors allowed on
real exports, as recommended by RFC 3530bis; and the flavors allowed
for SETCLIENTID are all flavors supported by the respective server
implementation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
We should always clear it before initiating file recovery.
Also ensure that we clear it after a CLOSE and/or after TEST_STATEID fails.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
After a server reboot, the reclaimer thread will recover all the existing
locks. For locks that are blocked, however, it will change the value
of block->b_status to nlm_lck_denied_grace_period in order to signal that
they need to wake up and resend the original blocking lock request.
Due to a bug, however, the block->b_status never gets reset after the
blocked locks have been woken up, and so the process goes into an
infinite loop of resends until the blocked lock is satisfied.
Reported-by: Marc Eshel <eshel@us.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
|
|
Defensive patch to ensure that we copy the state->open_stateid, which
can never be set to the delegation stateid.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Fix nfs4_select_rw_stateid() so that it chooses the open stateid
(or an all-zero stateid) if the delegation does not match the selected
read/write mode.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
RFC 3530 says that the seconds value of a nfstime4 structure is a 64bit
value, but we are instead sending a 32-bit 0 and then a 32bit conversion
of the 64bit Linux value. This means that if we try to set atime to a
value before the epoch (touch -t 196001010101) the client will only send
part of the new value due to lost precision.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
This reverts commit 3a366e614d0837d9fc23f78cdb1a1186ebc3387f.
Wanlong Gao reports that it causes a kernel panic on his machine several
minutes after boot. Reverting it removes the panic.
Jens says:
"It's not quite clear why that is yet, so I think we should just revert
the commit for 3.9 final (which I'm assuming is pretty close).
The wifi is crap at the LSF hotel, so sending this email instead of
queueing up a revert and pull request."
Reported-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Requested-by: Jens Axboe <axboe@kernel.dk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Change a u32 to loff_t hfsplus_file_truncate().
Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Documentation/filesystems/proc.txt says about coredump_filter bitmask,
Note bit 0-4 doesn't effect any hugetlb memory. hugetlb memory are only
effected by bit 5-6.
However current code can go into the subsequent flag checks of bit 0-4
for vma(VM_HUGETLB). So this patch inserts 'return' and makes it work
as written in the document.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org> [3.7+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently we fail to include any data on hugepages into coredump,
because VM_DONTDUMP is set on hugetlbfs's vma. This behavior was
recently introduced by commit 314e51b9851b ("mm: kill vma flag
VM_RESERVED and mm->reserved_vm counter").
This looks to me a serious regression, so let's fix it.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org> [3.7+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
