| Age | Commit message (Collapse) | Author |
|---|
|
Use the new folio_queue structures to simplify the writeback code. The
problem with referring to the i_pages xarray directly is that we may have
gaps in the sequence of folios we're writing from that we need to skip when
we're removing the writeback mark from the folios we're writing back from.
At the moment the code tries to deal with this by carefully tracking the
gaps in each writeback stream (eg. write to server and write to cache) and
divining when there's a gap that spans folios (something that's not helped
by folios not being a consistent size).
Instead, the folio_queue buffer contains pointers only the folios we're
dealing with, has them in ascending order and indicates a gap by placing
non-consequitive folios next to each other. This makes it possible to
track where we need to clean up to by just keeping track of where we've
processed to on each stream and taking the minimum.
Note that the I/O iterator is always rounded up to the end of the folio,
even if that is beyond the EOF position, so that the cache can do DIO from
the page. The excess space is cleared, though mmapped writes clobber it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-18-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Provide a function to reset the iterator on a subrequest.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-17-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Make the netfs write-side routines use the new folio_queue struct to hold a
rolling buffer of folios, with the issuer adding folios at the tail and the
collector removing them from the head as they're processed instead of using
an xarray.
This will allow a subsequent patch to simplify the write collector.
The primary mark (as tested by folioq_is_marked()) is used to note if the
corresponding folio needs putting.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-16-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Make smb_extract_iter_to_rdma() extract page fragments from an ITER_FOLIOQ
iterator into RDMA SGEs.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Tom Talpey <tom@talpey.com>
cc: Enzo Matsumiya <ematsumiya@suse.de>
cc: linux-cifs@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-15-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Now that detecting concurrent seeks is done by the filesystems that
require it we can remove f_version and free up 8 bytes for future
extensions.
Link: https://lore.kernel.org/r/20240830-vfs-file-f_version-v1-20-6d3e4816aa7b@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pipes use f_version to defer poll notifications until a write has been
observed. Since multiple file's refer to the same struct pipe_inode_info
in their ->private_data moving it into their isn't feasible since we
would need to introduce an additional pointer indirection.
However, since pipes don't require f_pos_lock we placed a new f_pipe
member into a union with f_pos_lock that pipes can use. This is similar
to what we already do for struct inode where we have additional fields
per file type. This will allow us to fully remove f_version in the next
step.
Link: https://lore.kernel.org/r/20240830-vfs-file-f_version-v1-19-6d3e4816aa7b@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Only regular files with FMODE_ATOMIC_POS and directories need
f_pos_lock. Place a new f_pipe member in a union with f_pos_lock
that they can use and make them stop abusing f_version in follow-up
patches.
Link: https://lore.kernel.org/r/20240830-vfs-file-f_version-v1-18-6d3e4816aa7b@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Store the cookie to detect concurrent seeks on directories in
file->private_data.
Link: https://lore.kernel.org/r/20240830-vfs-file-f_version-v1-17-6d3e4816aa7b@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Store the cookie to detect concurrent seeks on directories in
file->private_data.
Link: https://lore.kernel.org/r/20240830-vfs-file-f_version-v1-16-6d3e4816aa7b@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Store the cookie to detect concurrent seeks on directories in
file->private_data.
Link: https://lore.kernel.org/r/20240830-vfs-file-f_version-v1-15-6d3e4816aa7b@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Store the cookie to detect concurrent seeks on directories in
file->private_data.
Link: https://lore.kernel.org/r/20240830-vfs-file-f_version-v1-14-6d3e4816aa7b@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Store the cookie to detect concurrent seeks on directories in
file->private_data.
Link: https://lore.kernel.org/r/20240830-vfs-file-f_version-v1-13-6d3e4816aa7b@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Thomas needs 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O
if necessary") in drm-misc, so start the backmerge cascade.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
|
|
f2fs: fix to don't panic system for no free segment fault injection
syzbot reports a f2fs bug as below:
F2FS-fs (loop0): inject no free segment in get_new_segment of __allocate_new_segment+0x1ce/0x940 fs/f2fs/segment.c:3167
F2FS-fs (loop0): Stopped filesystem due to reason: 7
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.c:2748!
CPU: 0 UID: 0 PID: 5109 Comm: syz-executor304 Not tainted 6.11.0-rc6-syzkaller-00363-g89f5e14d05b4 #0
RIP: 0010:get_new_segment fs/f2fs/segment.c:2748 [inline]
RIP: 0010:new_curseg+0x1f61/0x1f70 fs/f2fs/segment.c:2836
Call Trace:
__allocate_new_segment+0x1ce/0x940 fs/f2fs/segment.c:3167
f2fs_allocate_new_section fs/f2fs/segment.c:3181 [inline]
f2fs_allocate_pinning_section+0xfa/0x4e0 fs/f2fs/segment.c:3195
f2fs_expand_inode_data+0x5d6/0xbb0 fs/f2fs/file.c:1799
f2fs_fallocate+0x448/0x960 fs/f2fs/file.c:1903
vfs_fallocate+0x553/0x6c0 fs/open.c:334
do_vfs_ioctl+0x2592/0x2e50 fs/ioctl.c:886
__do_sys_ioctl fs/ioctl.c:905 [inline]
__se_sys_ioctl+0x81/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0010:get_new_segment fs/f2fs/segment.c:2748 [inline]
RIP: 0010:new_curseg+0x1f61/0x1f70 fs/f2fs/segment.c:2836
The root cause is when we inject no free segment fault into f2fs,
we should not panic system, fix it.
Fixes: 8b10d3653735 ("f2fs: introduce FAULT_NO_SEGMENT")
Reported-by: syzbot+341e5f32ebafbb46b81c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/000000000000f0ee5b0621ab694b@google.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
syzbot reports a f2fs bug as below:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 58 at kernel/rcu/sync.c:177 rcu_sync_dtor+0xcd/0x180 kernel/rcu/sync.c:177
CPU: 1 UID: 0 PID: 58 Comm: kworker/1:2 Not tainted 6.10.0-syzkaller-12562-g1722389b0d86 #0
Workqueue: events destroy_super_work
RIP: 0010:rcu_sync_dtor+0xcd/0x180 kernel/rcu/sync.c:177
Call Trace:
percpu_free_rwsem+0x41/0x80 kernel/locking/percpu-rwsem.c:42
destroy_super_work+0xec/0x130 fs/super.c:282
process_one_work kernel/workqueue.c:3231 [inline]
process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312
worker_thread+0x86d/0xd40 kernel/workqueue.c:3390
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
As Christian Brauner pointed out [1]: the root cause is f2fs sets
SB_RDONLY flag in internal function, rather than setting the flag
covered w/ sb->s_umount semaphore via remount procedure, then below
race condition causes this bug:
- freeze_super()
- sb_wait_write(sb, SB_FREEZE_WRITE)
- sb_wait_write(sb, SB_FREEZE_PAGEFAULT)
- sb_wait_write(sb, SB_FREEZE_FS)
- f2fs_handle_critical_error
- sb->s_flags |= SB_RDONLY
- thaw_super
- thaw_super_locked
- sb_rdonly() is true, so it skips
sb_freeze_unlock(sb, SB_FREEZE_FS)
- deactivate_locked_super
Since f2fs has almost the same logic as ext4 [2] when handling critical
error in filesystem if it mounts w/ errors=remount-ro option:
- set CP_ERROR_FLAG flag which indicates filesystem is stopped
- record errors to superblock
- set SB_RDONLY falg
Once we set CP_ERROR_FLAG flag, all writable interfaces can detect the
flag and stop any further updates on filesystem. So, it is safe to not
set SB_RDONLY flag, let's remove the logic and keep in line w/ ext4 [3].
[1] https://lore.kernel.org/all/20240729-himbeeren-funknetz-96e62f9c7aee@brauner
[2] https://lore.kernel.org/all/20240729132721.hxih6ehigadqf7wx@quack3
[3] https://lore.kernel.org/linux-ext4/20240805201241.27286-1-jack@suse.cz
Fixes: b62e71be2110 ("f2fs: support errors=remount-ro|continue|panic mountoption")
Reported-by: syzbot+20d7e439f76bbbd863a7@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000b90a8e061e21d12f@google.com/
Cc: Jan Kara <jack@suse.cz>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Chao Yu <chao@kernel.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
We need to introduce a valid block ratio threshold not to trigger
excessive GC for zoned deivces. The initial value of it is 95%. So, F2FS
will stop the thread from intiating GC for sections having valid blocks
exceeding the ratio.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Added control knobs for gc_no_zoned_gc_percent and
gc_boost_zoned_gc_percent.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Under low free section count, we need to use FG_GC instead of BG_GC to
recover free sections.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Need bigger BG GC migration window granularity when free section is
running low.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
For the fine tuning of GC behavior, add reserved_segments sysfs node.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
We can control the scanning window granularity for GC migration. For
more frequent scanning and GC on zoned devices, we need a fine grained
control knob for it.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Since we don't have any GC on device side for zoned devices, need more
aggressive BG GC. So, tune the parameters for that.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch addresses the problem that when using LFS mode, unused blocks
may occur in f2fs_map_blocks() during block allocation for dio writes.
If a new section is allocated during block allocation, it will not be
included in the map struct by map_is_mergeable() if the LBA of the
allocated block is not contiguous. However, the block already allocated
in this process will remain unused due to the LFS mode.
This patch avoids the possibility of unused blocks by escaping
f2fs_map_blocks() when allocating the last block in a section.
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Some f2fs ioctl interfaces like f2fs_ioc_set_pin_file(),
f2fs_move_file_range(), and f2fs_defragment_range() missed to
check atomic_write status, which may cause potential race issue,
fix it.
Cc: stable@vger.kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
syzbot reports a f2fs bug as below:
kernel BUG at fs/f2fs/inode.c:896!
RIP: 0010:f2fs_evict_inode+0x1598/0x15c0 fs/f2fs/inode.c:896
Call Trace:
evict+0x532/0x950 fs/inode.c:704
dispose_list fs/inode.c:747 [inline]
evict_inodes+0x5f9/0x690 fs/inode.c:797
generic_shutdown_super+0x9d/0x2d0 fs/super.c:627
kill_block_super+0x44/0x90 fs/super.c:1696
kill_f2fs_super+0x344/0x690 fs/f2fs/super.c:4898
deactivate_locked_super+0xc4/0x130 fs/super.c:473
cleanup_mnt+0x41f/0x4b0 fs/namespace.c:1373
task_work_run+0x24f/0x310 kernel/task_work.c:228
ptrace_notify+0x2d2/0x380 kernel/signal.c:2402
ptrace_report_syscall include/linux/ptrace.h:415 [inline]
ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline]
syscall_exit_work+0xc6/0x190 kernel/entry/common.c:173
syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline]
syscall_exit_to_user_mode+0x279/0x370 kernel/entry/common.c:218
do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0010:f2fs_evict_inode+0x1598/0x15c0 fs/f2fs/inode.c:896
Online repaire on corrupted directory in f2fs_lookup() can generate
dirty data/meta while racing w/ readonly remount, it may leave dirty
inode after filesystem becomes readonly, however, checkpoint() will
skips flushing dirty inode in a state of readonly mode, result in
above panic.
Let's get rid of online repaire in f2fs_lookup(), and leave the work
to fsck.f2fs.
Fixes: 510022a85839 ("f2fs: add F2FS_INLINE_DOTS to recover missing dot dentries")
Reported-by: syzbot+ebea2790904673d7c618@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000a7b20f061ff2d56a@google.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Keep atomic file clean while updating and make it dirtied during commit
in order to avoid unnecessary and excessive inode updates in the previous
fix.
Fixes: 4bf78322346f ("f2fs: mark inode dirty for FI_ATOMIC_COMMITTED flag")
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
[SUBPAGE COMPRESSION LIMITS]
Currently inside writepage_delalloc(), if a delalloc range is going to
be submitted asynchronously (inline or compression, the page
dirty/writeback/unlock are all handled in at different time, not at the
submission time), then we return 1 and extent_writepage() will skip the
submission.
This is fine if every sector matches page size, but if a sector is
smaller than page size (aka, subpage case), then it can be very
problematic, for example for the following 64K page:
0 16K 32K 48K 64K
|/| |///////| |/|
| |
4K 52K
Where |/| is the dirty range we need to submit.
In the above case, we need the following different handling for the 3
ranges:
- [0, 4K) needs to be submitted for regular write
A single sector cannot be compressed.
- [16K, 32K) needs to be submitted for compressed write
- [48K, 52K) needs to be submitted for regular write.
Above, if we try to submit [16K, 32K) for compressed write, we will
return 1 and immediately, and without submitting the remaining
[48K, 52K) range.
Furthermore, since extent_writepage() will exit without unlocking any
sectors, the submitted range [0, 4K) will not have sector unlocked.
That's the reason why for now subpage is only allowed for full page
range.
[ENHANCEMENT]
- Introduce a submission bitmap at btrfs_bio_ctrl::submit_bitmap
This records which sectors will be submitted by extent_writepage_io().
This allows us to track which sectors needs to be submitted thus later
to be properly unlocked.
For asynchronously submitted range (inline/compression), the
corresponding bits will be cleared from that bitmap.
- Only return 1 if no sector needs to be submitted in
writepage_delalloc()
- Only submit sectors marked by submission bitmap inside
extent_writepage_io()
So we won't touch the asynchronously submitted part.
- Introduce btrfs_folio_end_writer_lock_bitmap() helper
This will only unlock the involved sectors specified by @bitmap
parameter, to avoid touching the range asynchronously submitted.
Please note that, since subpage compression is still limited to page
aligned range, this change is only a preparation for future sector
perfect compression support for subpage.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function btrfs_folio_unlock_writer() is already calling
btrfs_folio_end_writer_lock() to do the heavy lifting work, the only
missing 0 writer check.
Thus there is no need to keep two different functions, move the 0 writer
check into btrfs_folio_end_writer_lock(), and remove
btrfs_folio_unlock_writer().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
All cleanup paths lead to btrfs_path_free so path can be defined with
the automatic freeing callback in the following functions:
- btrfs_insert_orphan_item()
- btrfs_del_orphan_item()
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
All cleanup paths lead to btrfs_path_free so path can be defined with
the automatic freeing callback in the following functions:
- calculate_emulated_zone_size()
- calculate_alloc_pointer()
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add a DEFINE_FREE for struct btrfs_path. This defines a function that
can be called using the __free attribute. Define a macro
BTRFS_PATH_AUTO_FREE to make the declaration of an auto freeing path
very clear.
The intended use is to define the auto free of path in cases where the
path is allocated somewhere at the beginning and freed either on all
error paths or at the end of the function.
int func() {
BTRFS_PATH_AUTO_FREE(path);
if (...)
return -ERROR;
path = alloc_path();
...
if (...)
return -ERROR;
...
return 0;
}
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
[ update changelog ]
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function btrfs_folio_end_all_writers() is only utilized in
extent_writepage() as a way to unlock all subpage range (for both
successful submission and error handling).
Meanwhile we have a similar function, btrfs_folio_end_writer_lock().
The difference is, btrfs_folio_end_writer_lock() expects a range that is
a subset of the already locked range.
This limit on btrfs_folio_end_writer_lock() is a little overkilled,
preventing it from being utilized for error paths.
So here we enhance btrfs_folio_end_writer_lock() to accept a superset of
the locked range, and only end the locked subset.
This means we can replace btrfs_folio_end_all_writers() with
btrfs_folio_end_writer_lock() instead.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Continue adding const to parameters. This is for clarity and minor
addition to safety. There are some minor effects, in the assembly code
and .ko measured on release config.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently BTRFS_I is a static inline function that takes a const inode
and returns btrfs inode, dropping the 'const' qualifier. This can break
assumptions of compiler though it seems there's no real case.
To make the parameter and return type consistent regardint const we can
use the container_of_const() that preserves it. However this would not
check the parameter type. To fix that use the same _Generic construct
but implement only the two expected types.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have a few places that check if we have the inode locked by doing:
ASSERT(inode_is_locked(vfs_inode));
This actually proved to be useful several times as if assertions are
enabled (and by default they are in many distros) it immediately triggers
a crash which is impossible for users to miss.
However that doesn't check if the lock is held by the calling task, so
the check passes if some other task locked the inode.
Using one of the lockdep functions to check the lock is held, like
lockdep_assert_held() for example, does check that the calling task
holds the lock, and if that's not the case it produces a warning and
stack trace in dmesg. However, despite the misleading "assert" in the
name of the lockdep helpers, it does not trigger a crash/BUG_ON(), just
a warning and splat in dmesg, which is easy to get unnoticed by users
who may have lockdep enabled.
So add a helper that does the ASSERT() and calls lockdep_assert_held()
immediately after and use it every where we check the inode is locked.
Like this if the lock is held by some other task we get the warning
in dmesg which is caught by fstests, very helpful during development,
and may also be occassionaly noticed by users with lockdep enabled.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Even in case of failure we could've discarded some data and userspace
should be made aware of it, so copy fstrim_range to userspace
regardless.
Also make sure to update the trimmed bytes amount even if
btrfs_trim_free_extents fails.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Luca Stefani <luca.stefani.ge1@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. Moreover find_or_create_page() is compatible API, and it can
replaced with __filemap_get_folio(). Some interfaces have been converted
to use folio before, so the conversion operation from page can be
eliminated here.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. Based on the previous patch, the compression path can be
directly used in folio without converting to page.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. And memcpy_to_page() can be replaced with memcpy_to_folio().
But there is no memzero_folio(), but it can be replaced equivalently by
folio_zero_range().
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. And memcpy_to_page() can be replaced with memcpy_to_folio().
But there is no memzero_folio(), but it can be replaced equivalently by
folio_zero_range().
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. And memcpy_to_page() can be replaced with memcpy_to_folio().
But there is no memzero_folio(), but it can be replaced equivalently by
folio_zero_range().
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. And page_to_inode() can be replaced with folio_to_inode() now.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. Moreover, use folio_pos() instead of page_offset(),
which is more consistent with folio usage.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. Moreover, use folio_pos() instead of page_offset(),
which is more consistent with folio usage.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. Moreover, use kmap_local_folio() instead of kmap_local_page(),
which is more consistent with folio usage.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. And use folio_pos instead of page_offset, which is more
consistent with folio usage. At the same time, folio_test_private() can
handle folio directly without converting from page to folio first.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. Use folio_pos instead of page_offset, which is more
consistent with folio usage.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. Now clear_page_extent_mapped() can deal with a folio
directly, so change its name to clear_folio_extent_mapped().
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
