| Age | Commit message (Collapse) | Author |
|---|
|
The helper functions v9fs_cache_register and v9fs_cache_unregister are
trivial helper functions that don't offer any extra functionality and
are unncessary. Replace them with direct calls to v9fs_init_inode_cache
and v9fs_destroy_inode_cache respectively to simplify the code.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Message-ID: <20241107095756.10261-1-colin.i.king@gmail.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
The __filemap_get_folio() function returns error pointers.
It never returns NULL. So use IS_ERR() to check it.
Fixes: 1da86618bdce ("fs: Convert aops->write_begin to take a folio")
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
In one special case, recovery is unable to reliably rebuild
lock state by simply recreating lkb structs as sent from the
lock holders. That case is when the lkb's include conversions
between PR and CW modes.
The recovery code has always recognized this special case,
but the implemention has always been broken, and would set
invalid modes in recovered lkb's. Unpredictable or bogus
errors could then be returned for further locking calls on
these locks.
This bug has gone unnoticed for so long due to some
combination of:
- applications never or infrequently converting between PR/CW
- recovery not occuring during these conversions
- if the recovery bug does occur, the caller may not notice,
depending on what further locking calls are made, e.g. if
the lock is simply unlocked it may go unnoticed
However, a core analysis from a recent gfs2 bug report points
to this broken code.
PR = Protected Read
CW = Concurrent Write
PR and CW are incompatible
PR and PR are compatible
CW and CW are compatible
Example 1
node C, resource R
granted: PR node A
granted: PR node B
granted: NL node C
granted: NL node D
- A sends convert PR->CW to C
- C fails before A gets a reply
- recovery occurs
At this point, A does not know if it still holds
the lock in PR, or if its conversion to CW was granted:
- If A's conversion to CW was granted, then another
node's CW lock may also have been granted.
- If A's conversion to CW was not granted, it still
holds a PR lock, and other nodes may also hold PR locks.
So, the new master of R cannot simply recreate the lock
from A using granted mode PR and requested mode CW.
The new master must look at all the recovered locks to
determine the correct granted modes, and ensure that all
the recovered locks are recreated in compatible states.
The correct lock recovery steps in this example are:
- node D becomes the new master of R
- node B sends D its lkb, granted PR
- node A sends D its lkb, convert PR->CW
- D determines the correct lock state is:
granted: PR node B
convert: PR->CW node A
The lkb sent by each node was recreated without
any change on the new master node.
Example 2
node C, resource R
granted: PR node A
granted: NL node C
granted: NL node D
waiting: CW node B
- A sends convert PR->CW to C
- C grants the conversion to CW for A
- C grants the waiting request for CW to B
- C sends granted message to B, but fails
before it can send the granted message to A
- B receives the granted message from C
At this point:
- A believes it is converting PR->CW
- B believes it is holding a CW lock
The correct lock recovery steps in this example are:
- node D becomes the new master of R
- node A sends D its lkb, convert PR->CW
- node B sends D its lkb, granted CW
- D determins the correct lock state is:
granted: CW node B
granted: CW node A
The lkb sent by B is recreated without change,
but the lkb sent by A is changed because the
granted mode was not compatible.
Fixes to make this work correctly:
recover_convert_waiter: should not make any changes
to a converting lkb that is still waiting for a reply
message. It was previously setting grmode to IV, which
is invalid state, so the lkb would not be handled
correctly by other code.
receive_rcom_lock_args: was checking the wrong lkb field
(wait_type instead of status) to determine if the lkb is
being converted, and in need of inspection for this special
recovery. It was also setting grmode to IV in the lkb,
causing it to be mishandled by other code.
Now, this function just puts the lkb, directly as sent,
onto the convert queue of the resource being recovered,
and corrects it in recover_conversion() later, if needed.
recover_conversion: the job of this function is to detect
and correct lkb states for the special PR/CW conversions.
The new code now checks for recovered lkbs on the granted
queue with grmode PR or CW, and takes the real grmode from
that. Then it looks for lkbs on the convert queue with an
incompatible grmode (i.e. grmode PR when the real grmode is
CW, or v.v.) These converting lkbs need to be fixed.
They are fixed by temporarily setting their grmode to NL,
so that grmodes are not incompatible and won't confuse other
locking code. The converting lkb will then be granted at
the end of recovery, replacing the temporary NL grmode.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more fix that seems urgent and good to have in 6.12 final.
It could potentially lead to unexpected transaction aborts, due to
wrong comparison and order of processing of delayed refs"
* tag 'for-6.12-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix incorrect comparison for delayed refs
|
|
Clang warns (or errors with CONFIG_WERROR=y):
fs/ubifs/journal.c:986:20: error: variable 'err' is uninitialized when used here [-Werror,-Wuninitialized]
986 | ubifs_ro_mode(c, err);
| ^~~
Set err to -EPERM before the call to ubifs_ro_mode() and reuse it in the
return statement to resolve the warning.
Fixes: 957e1c4e1779 ("ubifs: ubifs_jnl_write_inode: Only check once for the limitation of xattr count")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
There is a spelling mistake in an error message literal string. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20241108112509.109891-1-colin.i.king@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert ecryptfs to the new mount API.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Link: https://lore.kernel.org/r/20241028143359.605061-3-sandeen@redhat.com
Acked-by: Tyler Hicks <code@tyhicks.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Under the new mount API, mount options are parsed one at a time.
Any validation that examines multiple options must be done after parsing
is complete, so factor out a ecryptfs_validate_options() which can be
called separately.
To facilitate this, temporarily move the local variables that tracked
whether various options have been set in the parsing function, into the
ecryptfs_mount_crypt_stat structure so that they can be examined later.
These will be moved to a more ephemeral struct in the mount api conversion
patch to follow.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Link: https://lore.kernel.org/r/20241028143359.605061-2-sandeen@redhat.com
Acked-by: Tyler Hicks <code@tyhicks.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Teach open_by_handle_at(2) about the type format of "explicit connectable"
file handles that were created using the AT_HANDLE_CONNECTABLE flag to
name_to_handle_at(2).
When decoding an "explicit connectable" file handles, name_to_handle_at(2)
should fail if it cannot open a "connected" fd with known path, which is
accessible (to capable user) from mount fd path.
Note that this does not check if the path is accessible to the calling
user, just that it is accessible wrt the mount namesapce, so if there
is no "connected" alias, or if parts of the path are hidden in the
mount namespace, open_by_handle_at(2) will return -ESTALE.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20241011090023.655623-4-amir73il@gmail.com
Fixes: 570df4e9c23f ("ceph: snapshot nfs re-export")
Acked-by:
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
nfsd encodes "connectable" file handles for the subtree_check feature,
which can be resolved to an open file with a connected path.
So far, userspace nfs server could not make use of this functionality.
Introduce a new flag AT_HANDLE_CONNECTABLE to name_to_handle_at(2).
When used, the encoded file handle is "explicitly connectable".
The "explicitly connectable" file handle sets bits in the high 16bit of
the handle_type field, so open_by_handle_at(2) will know that it needs
to open a file with a connected path.
old kernels will now recognize the handle_type with high bits set,
so "explicitly connectable" file handles cannot be decoded by
open_by_handle_at(2) on old kernels.
The flag AT_HANDLE_CONNECTABLE is not allowed together with either
AT_HANDLE_FID or AT_EMPTY_PATH.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20241011090023.655623-3-amir73il@gmail.com
Fixes: 570df4e9c23f ("ceph: snapshot nfs re-export")
Acked-by:
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We would like to use the high 16bit of the handle_type field to encode
file handle traits, such as "connectable".
In preparation for this change, make sure that filesystems do not return
a handle_type value with upper bits set and that the open_by_handle_at(2)
syscall rejects these handle types.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20241011090023.655623-2-amir73il@gmail.com
Fixes: 570df4e9c23f ("ceph: snapshot nfs re-export")
Acked-by:
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Stop using struct fd to return a real file from ovl_real_fdget(),
because we no longer return a temporary file object and the callers
always get a borrowed file reference.
Rename the helper to ovl_real_file(), return a borrowed reference of
the real file that is referenced from the overlayfs file or an error.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
Stop using struct fd to return a real file from ovl_real_fdget_path(),
because we no longer return a temporary file object and the callers
always get a borrowed file reference.
Rename the helper to ovl_real_file_path(), return a borrowed reference
of the real file that is referenced from the overlayfs file or an error.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
When an overlayfs file is opened as lower and then the file is copied up,
every operation on the overlayfs open file will open a temporary backing
file to the upper dentry and close it at the end of the operation.
Store the upper real file along side the original (lower) real file in
ovl_file instead of opening a temporary upper file on every operation.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
Instead of using ->private_data to point at realfile directly, so
that we can add more context per ovl open file.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
ovl_fsync() with !datasync opens a backing file from the top most dentry
in the stack, checks if this dentry is non-upper and skips the fsync.
In case of an overlay dentry stack with lower data and lower metadata
above it, but without an upper metadata above it, the backing file is
opened from the top most lower metadata dentry and never used.
Refactor the helper ovl_real_fdget_meta() into ovl_real_fdget_path() and
open code the checks for non-upper inode in ovl_fsync(), so in that case
we can avoid the unneeded backing file open.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
Use override_creds_light() in ovl_override_creds() and
revert_creds_light() in ovl_revert_creds().
The _light() functions do not change the 'usage' of the credentials in
question, as they refer to the credentials associated with the
mounter, which have a longer lifetime.
In ovl_setup_cred_for_create(), do not need to modify the mounter
credentials (returned by override_creds_light()) 'usage' counter.
Add a warning to verify that we are indeed working with the mounter
credentials (stored in the superblock). Failure in this assumption
means that creds may leak.
Suggested-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
Syzbot has reported the following BUG:
kernel BUG at fs/ocfs2/uptodate.c:509!
...
Call Trace:
<TASK>
? __die_body+0x5f/0xb0
? die+0x9e/0xc0
? do_trap+0x15a/0x3a0
? ocfs2_set_new_buffer_uptodate+0x145/0x160
? do_error_trap+0x1dc/0x2c0
? ocfs2_set_new_buffer_uptodate+0x145/0x160
? __pfx_do_error_trap+0x10/0x10
? handle_invalid_op+0x34/0x40
? ocfs2_set_new_buffer_uptodate+0x145/0x160
? exc_invalid_op+0x38/0x50
? asm_exc_invalid_op+0x1a/0x20
? ocfs2_set_new_buffer_uptodate+0x2e/0x160
? ocfs2_set_new_buffer_uptodate+0x144/0x160
? ocfs2_set_new_buffer_uptodate+0x145/0x160
ocfs2_group_add+0x39f/0x15a0
? __pfx_ocfs2_group_add+0x10/0x10
? __pfx_lock_acquire+0x10/0x10
? mnt_get_write_access+0x68/0x2b0
? __pfx_lock_release+0x10/0x10
? rcu_read_lock_any_held+0xb7/0x160
? __pfx_rcu_read_lock_any_held+0x10/0x10
? smack_log+0x123/0x540
? mnt_get_write_access+0x68/0x2b0
? mnt_get_write_access+0x68/0x2b0
? mnt_get_write_access+0x226/0x2b0
ocfs2_ioctl+0x65e/0x7d0
? __pfx_ocfs2_ioctl+0x10/0x10
? smack_file_ioctl+0x29e/0x3a0
? __pfx_smack_file_ioctl+0x10/0x10
? lockdep_hardirqs_on_prepare+0x43d/0x780
? __pfx_lockdep_hardirqs_on_prepare+0x10/0x10
? __pfx_ocfs2_ioctl+0x10/0x10
__se_sys_ioctl+0xfb/0x170
do_syscall_64+0xf3/0x230
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
</TASK>
When 'ioctl(OCFS2_IOC_GROUP_ADD, ...)' has failed for the particular
inode in 'ocfs2_verify_group_and_input()', corresponding buffer head
remains cached and subsequent call to the same 'ioctl()' for the same
inode issues the BUG() in 'ocfs2_set_new_buffer_uptodate()' (trying
to cache the same buffer head of that inode). Fix this by uncaching
the buffer head with 'ocfs2_remove_from_cache()' on error path in
'ocfs2_group_add()'.
Link: https://lkml.kernel.org/r/20241114043844.111847-1-dmantipov@yandex.ru
Fixes: 7909f2bf8353 ("[PATCH 2/2] ocfs2: Implement group add for online resize")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reported-by: syzbot+453873f1588c2d75b447@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=453873f1588c2d75b447
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Dmitry Antipov <dmantipov@yandex.ru>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The "arg->vec_len" variable is a u64 that comes from the user at the start
of the function. The "arg->vec_len * sizeof(struct page_region))"
multiplication can lead to integer wrapping. Use size_mul() to avoid
that.
Also the size_add/mul() functions work on unsigned long so for 32bit
systems we need to ensure that "arg->vec_len" fits in an unsigned long.
Link: https://lkml.kernel.org/r/39d41335-dd4d-48ed-8a7f-402c57d8ea84@stanley.mountain
Fixes: 52526ca7fdb9 ("fs/proc/task_mmu: implement IOCTL to get and optionally clear info about PTEs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Andrei Vagin <avagin@google.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The rtime decompression routine does not fully check bounds during the
entirety of the decompression pass and can corrupt memory outside the
decompression buffer if the compressed data is corrupted. This adds the
required check to prevent this failure mode.
Cc: stable@vger.kernel.org
Signed-off-by: Kinsey Moore <kinsey.moore@oarcorp.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc8).
Conflicts:
tools/testing/selftests/net/.gitignore
252e01e68241 ("selftests: net: add netlink-dumps to .gitignore")
be43a6b23829 ("selftests: ncdevmem: Move ncdevmem under drivers/net/hw")
https://lore.kernel.org/all/20241113122359.1b95180a@canb.auug.org.au/
drivers/net/phy/phylink.c
671154f174e0 ("net: phylink: ensure PHY momentary link-fails are handled")
7530ea26c810 ("net: phylink: remove "using_mac_select_pcs"")
Adjacent changes:
drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
5b366eae7193 ("stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines")
e96321fad3ad ("net: ethernet: Switch back to struct platform_driver::remove()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The check for outpos > pos is always false because outpos is zero
and pos is at least zero; outpos can never be greater than pos.
The check is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Fix the indentation to ensure consistent code style and improve
readability, and to fix this warnings:
fs/jffs2/nodemgmt.c:635 jffs2_mark_node_obsolete() warn: inconsistent
indenting
fs/jffs2/nodemgmt.c:646 jffs2_mark_node_obsolete() warn: inconsistent
indenting
Signed-off-by: Suraj Sonawane <surajsonawane0215@gmail.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Fixed some confusing spelling errors, the details are as follows:
-in the code comments:
wating -> waiting
succefully -> successfully
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
When building the kernel with -Wmaybe-uninitialized, the compiler
reports this warning:
In function 'jffs2_mark_erased_block',
inlined from 'jffs2_erase_pending_blocks' at fs/jffs2/erase.c:116:4:
fs/jffs2/erase.c:474:9: warning: 'bad_offset' may be used uninitialized [-Wmaybe-uninitialized]
474 | jffs2_erase_failed(c, jeb, bad_offset);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fs/jffs2/erase.c: In function 'jffs2_erase_pending_blocks':
fs/jffs2/erase.c:402:18: note: 'bad_offset' was declared here
402 | uint32_t bad_offset;
| ^~~~~~~~~~
When mtd->point() is used, jffs2_erase_pending_blocks can return -EIO
without initializing bad_offset, which is later used at the filebad
label in jffs2_mark_erased_block.
Fix it by initializing this variable.
Fixes: 8a0f572397ca ("[JFFS2] Return values of jffs2_block_check_erase error paths")
Signed-off-by: Qingfang Deng <qingfang.deng@siflower.com.cn>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Remove hard-coded strings by using the str_yes_no() helper function.
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
After an insertion in TNC, the tree might split and cause a node to
change its `znode->parent`. A further deletion of other nodes in the
tree (which also could free the nodes), the aforementioned node's
`znode->cparent` could still point to a freed node. This
`znode->cparent` may not be updated when getting nodes to commit in
`ubifs_tnc_start_commit()`. This could then trigger a use-after-free
when accessing the `znode->cparent` in `write_index()` in
`ubifs_tnc_end_commit()`.
This can be triggered by running
rm -f /etc/test-file.bin
dd if=/dev/urandom of=/etc/test-file.bin bs=1M count=60 conv=fsync
in a loop, and with `CONFIG_UBIFS_FS_AUTHENTICATION`. KASAN then
reports:
BUG: KASAN: use-after-free in ubifs_tnc_end_commit+0xa5c/0x1950
Write of size 32 at addr ffffff800a3af86c by task ubifs_bgt0_20/153
Call trace:
dump_backtrace+0x0/0x340
show_stack+0x18/0x24
dump_stack_lvl+0x9c/0xbc
print_address_description.constprop.0+0x74/0x2b0
kasan_report+0x1d8/0x1f0
kasan_check_range+0xf8/0x1a0
memcpy+0x84/0xf4
ubifs_tnc_end_commit+0xa5c/0x1950
do_commit+0x4e0/0x1340
ubifs_bg_thread+0x234/0x2e0
kthread+0x36c/0x410
ret_from_fork+0x10/0x20
Allocated by task 401:
kasan_save_stack+0x38/0x70
__kasan_kmalloc+0x8c/0xd0
__kmalloc+0x34c/0x5bc
tnc_insert+0x140/0x16a4
ubifs_tnc_add+0x370/0x52c
ubifs_jnl_write_data+0x5d8/0x870
do_writepage+0x36c/0x510
ubifs_writepage+0x190/0x4dc
__writepage+0x58/0x154
write_cache_pages+0x394/0x830
do_writepages+0x1f0/0x5b0
filemap_fdatawrite_wbc+0x170/0x25c
file_write_and_wait_range+0x140/0x190
ubifs_fsync+0xe8/0x290
vfs_fsync_range+0xc0/0x1e4
do_fsync+0x40/0x90
__arm64_sys_fsync+0x34/0x50
invoke_syscall.constprop.0+0xa8/0x260
do_el0_svc+0xc8/0x1f0
el0_svc+0x34/0x70
el0t_64_sync_handler+0x108/0x114
el0t_64_sync+0x1a4/0x1a8
Freed by task 403:
kasan_save_stack+0x38/0x70
kasan_set_track+0x28/0x40
kasan_set_free_info+0x28/0x4c
__kasan_slab_free+0xd4/0x13c
kfree+0xc4/0x3a0
tnc_delete+0x3f4/0xe40
ubifs_tnc_remove_range+0x368/0x73c
ubifs_tnc_remove_ino+0x29c/0x2e0
ubifs_jnl_delete_inode+0x150/0x260
ubifs_evict_inode+0x1d4/0x2e4
evict+0x1c8/0x450
iput+0x2a0/0x3c4
do_unlinkat+0x2cc/0x490
__arm64_sys_unlinkat+0x90/0x100
invoke_syscall.constprop.0+0xa8/0x260
do_el0_svc+0xc8/0x1f0
el0_svc+0x34/0x70
el0t_64_sync_handler+0x108/0x114
el0t_64_sync+0x1a4/0x1a8
The offending `memcpy()` in `ubifs_copy_hash()` has a use-after-free
when a node becomes root in TNC but still has a `cparent` to an already
freed node. More specifically, consider the following TNC:
zroot
/
/
zp1
/
/
zn
Inserting a new node `zn_new` with a key smaller then `zn` will trigger
a split in `tnc_insert()` if `zp1` is full:
zroot
/ \
/ \
zp1 zp2
/ \
/ \
zn_new zn
`zn->parent` has now been moved to `zp2`, *but* `zn->cparent` still
points to `zp1`.
Now, consider a removal of all the nodes _except_ `zn`. Just when
`tnc_delete()` is about to delete `zroot` and `zp2`:
zroot
\
\
zp2
\
\
zn
`zroot` and `zp2` get freed and the tree collapses:
zn
`zn` now becomes the new `zroot`.
`get_znodes_to_commit()` will now only find `zn`, the new `zroot`, and
`write_index()` will check its `znode->cparent` that wrongly points to
the already freed `zp1`. `ubifs_copy_hash()` thus gets wrongly called
with `znode->cparent->zbranch[znode->iip].hash` that triggers the
use-after-free!
Fix this by explicitly setting `znode->cparent` to `NULL` in
`get_znodes_to_commit()` for the root node. The search for the dirty
nodes is bottom-up in the tree. Thus, when `find_next_dirty(znode)`
returns NULL, the current `znode` _is_ the root node. Add an assert for
this.
Fixes: 16a26b20d2af ("ubifs: authentication: Add hashes to index nodes")
Tested-by: Waqar Hameed <waqar.hameed@axis.com>
Co-developed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
commit 2b88fc21cae9 ("ubifs: Switch to generic xattr handlers") removes
usage of this anonymous enum. Delete the enum as well.
Signed-off-by: Pascal Eberhard <pascal.eberhard@se.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Pull bcachefs fixes from Kent Overstreet:
"This fixes one minor regression from the btree cache fixes (in the
scan_for_btree_nodes repair path) - and the shutdown path fix is the
big one here, in terms of bugs closed:
- Assorted tiny syzbot fixes
- Shutdown path fix: "bch2_btree_write_buffer_flush_going_ro()"
The shutdown path wasn't flushing the btree write buffer, leading
to shutting down while we still had operations in flight. This
fixes a whole slew of syzbot bugs, and undoubtedly other strange
heisenbugs.
* tag 'bcachefs-2024-11-13' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix assertion pop in bch2_ptr_swab()
bcachefs: Fix journal_entry_dev_usage_to_text() overrun
bcachefs: Allow for unknown key types in backpointers fsck
bcachefs: Fix assertion pop in topology repair
bcachefs: Fix hidden btree errors when reading roots
bcachefs: Fix validate_bset() repair path
bcachefs: Fix missing validation for bch_backpointer.level
bcachefs: Fix bch_member.btree_bitmap_shift validation
bcachefs: bch2_btree_write_buffer_flush_going_ro()
|
|
Move a pair of kfree() calls behind the label “out_err”
so that two statements can be better reused at the end of
this function implementation.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
An iput(xino) call was immediately used after a return value check
for a remove_xattr() call in this function implementation.
Thus call such a function only once instead directly before the check.
This issue was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Since commit e874dcde1cbf ("ubifs: Reserve one leb for each journal
head while doing budget"), available space is calulated by deducting
reservation for all journal heads. However, the total block count (
which is only used by statfs) is not updated yet, which will cause
the wrong displaying for used space(total - available).
Fix it by deducting reservation for all journal heads from total
block count.
Fixes: e874dcde1cbf ("ubifs: Reserve one leb for each journal head while doing budget")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
As opposed to open-code, using the ERR_CAST macro clearly indicates that
this is a pointer to an error value and a type conversion was performed.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
In commit ae8c51175730 ("fs: add FS_IOC_GETFSSYSFSPATH"), a
new fs ioctl was introduced to standardize exporting data from
sysfs across filesystems. The returned path will always be of the
form "$FSTYP/$SYSFS_IDENTIFIER", where the sysfs identifier may
be a UUID or a device name.
The ubifs is a file system based on char device, and the common
method to fill s_sysfs_name (super_set_sysfs_name_bdev) is
unavialable. So in order to support FS_IOC_GETFSSYSFSPATH ioctl,
we fill the s_sysfs_name with ubi_volume_info member which keeps
the format defined in macro UBIFS_DFS_DIR_NAME by using
super_set_sysfs_name_generic.
That's for ubifs, it will output "ubifs/<dev>".
```
$ ./ioctl_getfssysfs_path /mnt/ubifs/testfile
path: ubifs/ubi0_0
$ ls /sys/fs/ubifs/ubi0_0/
errors_crc errors_magic errors_node
```
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
In the ubifs, ubifs_fileattr_get and ubifs_fileattr_set
have been implemented, GETFLAGS and SETFLAGS ioctl are not
handled in filesystem's own ioctl helper. Additionally,
these flags' cases are not handled in ubifs's ioctl helper,
so we can remove them.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Display the inode number in error message when the same orphan inode
is added twice, which could provide more information for debugging.
Signed-off-by: Liu Mingrui <liumingrui@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Function ubifs_evict_xattr_inode() is imported by commit 272eda8298dc
("ubifs: Correctly evict xattr inodes") to reclaim xattr inode when
the host inode is deleted.
The xattr inode is evicted in the host inode deleting process since
commit 7959cf3a7506 ("ubifs: journal: Handle xattrs like files").
So the ineffective function ubifs_evict_xattr_inode() can be deleted
safely.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
No need to check the limitation of xattr count every time in function
ubifs_jnl_write_inode(), because the 'ui->xattr_cnt' won't be modified
by others in the inode evicting process.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Add the ability to retrieve security mount options. Keep them separate
from filesystem specific mount options so it's easy to tell them apart.
Also allow to retrieve them separate from other mount options as most of
the time users won't be interested in security specific mount options.
Link: https://lore.kernel.org/r/20241114-radtour-ofenrohr-ff34b567b40a@brauner
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When I reworked delayed ref comparison in cf4f04325b2b ("btrfs: move
->parent and ->ref_root into btrfs_delayed_ref_node"), I made a mistake
and returned -1 for the case where ref1->ref_root was > than
ref2->ref_root. This is a subtle bug that can result in improper
delayed ref running order, which can result in transaction aborts.
Fixes: cf4f04325b2b ("btrfs: move ->parent and ->ref_root into btrfs_delayed_ref_node")
CC: stable@vger.kernel.org # 6.10+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
ovl_setup_cred_for_create() decrements one refcount of new creds and
ovl_revert_creds() in callers decrements the last refcount.
In preparation to revert_creds_light() back to caller creds, pass an
explicit reference of the creators creds to the callers and drop the
refcount explicitly in the callers after ovl_revert_creds().
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
'for-next/tlb', 'for-next/misc', 'for-next/mte', 'for-next/sysreg', 'for-next/stacktrace', 'for-next/hwcap3', 'for-next/kselftest', 'for-next/crc32', 'for-next/guest-cca', 'for-next/haft' and 'for-next/scs', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf: Switch back to struct platform_driver::remove()
perf: arm_pmuv3: Add support for Samsung Mongoose PMU
dt-bindings: arm: pmu: Add Samsung Mongoose core compatible
perf/dwc_pcie: Fix typos in event names
perf/dwc_pcie: Add support for Ampere SoCs
ARM: pmuv3: Add missing write_pmuacr()
perf/marvell: Marvell PEM performance monitor support
perf/arm_pmuv3: Add PMUv3.9 per counter EL0 access control
perf/dwc_pcie: Convert the events with mixed case to lowercase
perf/cxlpmu: Support missing events in 3.1 spec
perf: imx_perf: add support for i.MX91 platform
dt-bindings: perf: fsl-imx-ddr: Add i.MX91 compatible
drivers perf: remove unused field pmu_node
* for-next/gcs: (42 commits)
: arm64 Guarded Control Stack user-space support
kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
arm64/gcs: Fix outdated ptrace documentation
kselftest/arm64: Ensure stable names for GCS stress test results
kselftest/arm64: Validate that GCS push and write permissions work
kselftest/arm64: Enable GCS for the FP stress tests
kselftest/arm64: Add a GCS stress test
kselftest/arm64: Add GCS signal tests
kselftest/arm64: Add test coverage for GCS mode locking
kselftest/arm64: Add a GCS test program built with the system libc
kselftest/arm64: Add very basic GCS test program
kselftest/arm64: Always run signals tests with GCS enabled
kselftest/arm64: Allow signals tests to specify an expected si_code
kselftest/arm64: Add framework support for GCS to signal handling tests
kselftest/arm64: Add GCS as a detected feature in the signal tests
kselftest/arm64: Verify the GCS hwcap
arm64: Add Kconfig for Guarded Control Stack (GCS)
arm64/ptrace: Expose GCS via ptrace and core files
arm64/signal: Expose GCS state in signal frames
arm64/signal: Set up and restore the GCS context for signal handlers
arm64/mm: Implement map_shadow_stack()
...
* for-next/probes:
: Various arm64 uprobes/kprobes cleanups
arm64: insn: Simulate nop instruction for better uprobe performance
arm64: probes: Remove probe_opcode_t
arm64: probes: Cleanup kprobes endianness conversions
arm64: probes: Move kprobes-specific fields
arm64: probes: Fix uprobes for big-endian kernels
arm64: probes: Fix simulate_ldr*_literal()
arm64: probes: Remove broken LDR (literal) uprobe support
* for-next/asm-offsets:
: arm64 asm-offsets.c cleanup (remove unused offsets)
arm64: asm-offsets: remove PREEMPT_DISABLE_OFFSET
arm64: asm-offsets: remove DMA_{TO,FROM}_DEVICE
arm64: asm-offsets: remove VM_EXEC and PAGE_SZ
arm64: asm-offsets: remove MM_CONTEXT_ID
arm64: asm-offsets: remove COMPAT_{RT_,SIGFRAME_REGS_OFFSET
arm64: asm-offsets: remove VMA_VM_*
arm64: asm-offsets: remove TSK_ACTIVE_MM
* for-next/tlb:
: TLB flushing optimisations
arm64: optimize flush tlb kernel range
arm64: tlbflush: add __flush_tlb_range_limit_excess()
* for-next/misc:
: Miscellaneous patches
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
arm64/ptrace: Clarify documentation of VL configuration via ptrace
acpi/arm64: remove unnecessary cast
arm64/mm: Change protval as 'pteval_t' in map_range()
arm64: uprobes: Optimize cache flushes for xol slot
acpi/arm64: Adjust error handling procedure in gtdt_parse_timer_block()
arm64: fix .data.rel.ro size assertion when CONFIG_LTO_CLANG
arm64/ptdump: Test both PTE_TABLE_BIT and PTE_VALID for block mappings
arm64/mm: Sanity check PTE address before runtime P4D/PUD folding
arm64/mm: Drop setting PTE_TYPE_PAGE in pte_mkcont()
ACPI: GTDT: Tighten the check for the array of platform timer structures
arm64/fpsimd: Fix a typo
arm64: Expose ID_AA64ISAR1_EL1.XS to sanitised feature consumers
arm64: Return early when break handler is found on linked-list
arm64/mm: Re-organize arch_make_huge_pte()
arm64/mm: Drop _PROT_SECT_DEFAULT
arm64: Add command-line override for ID_AA64MMFR0_EL1.ECV
arm64: head: Drop SWAPPER_TABLE_SHIFT
arm64: cpufeature: add POE to cpucap_is_possible()
arm64/mm: Change pgattr_change_is_safe() arguments as pteval_t
* for-next/mte:
: Various MTE improvements
selftests: arm64: add hugetlb mte tests
hugetlb: arm64: add mte support
* for-next/sysreg:
: arm64 sysreg updates
arm64/sysreg: Update ID_AA64MMFR1_EL1 to DDI0601 2024-09
* for-next/stacktrace:
: arm64 stacktrace improvements
arm64: preserve pt_regs::stackframe during exec*()
arm64: stacktrace: unwind exception boundaries
arm64: stacktrace: split unwind_consume_stack()
arm64: stacktrace: report recovered PCs
arm64: stacktrace: report source of unwind data
arm64: stacktrace: move dump_backtrace() to kunwind_stack_walk()
arm64: use a common struct frame_record
arm64: pt_regs: swap 'unused' and 'pmr' fields
arm64: pt_regs: rename "pmr_save" -> "pmr"
arm64: pt_regs: remove stale big-endian layout
arm64: pt_regs: assert pt_regs is a multiple of 16 bytes
* for-next/hwcap3:
: Add AT_HWCAP3 support for arm64 (also wire up AT_HWCAP4)
arm64: Support AT_HWCAP3
binfmt_elf: Wire up AT_HWCAP3 at AT_HWCAP4
* for-next/kselftest: (30 commits)
: arm64 kselftest fixes/cleanups
kselftest/arm64: Try harder to generate different keys during PAC tests
kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
kselftest/arm64: Add FPMR coverage to fp-ptrace
kselftest/arm64: Expand the set of ZA writes fp-ptrace does
kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
kselftest/arm64: Enable build of PAC tests with LLVM=1
kselftest/arm64: Check that SVCR is 0 in signal handlers
kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
kselftest/arm64: Fix build with stricter assemblers
kselftest/arm64: Test signal handler state modification in fp-stress
kselftest/arm64: Provide a SIGUSR1 handler in the kernel mode FP stress test
kselftest/arm64: Implement irritators for ZA and ZT
kselftest/arm64: Remove unused ADRs from irritator handlers
kselftest/arm64: Correct misleading comments on fp-stress irritators
kselftest/arm64: Poll less often while waiting for fp-stress children
kselftest/arm64: Increase frequency of signal delivery in fp-stress
kselftest/arm64: Fix encoding for SVE B16B16 test
...
* for-next/crc32:
: Optimise CRC32 using PMULL instructions
arm64/crc32: Implement 4-way interleave using PMULL
arm64/crc32: Reorganize bit/byte ordering macros
arm64/lib: Handle CRC-32 alternative in C code
* for-next/guest-cca:
: Support for running Linux as a guest in Arm CCA
arm64: Document Arm Confidential Compute
virt: arm-cca-guest: TSM_REPORT support for realms
arm64: Enable memory encrypt for Realms
arm64: mm: Avoid TLBI when marking pages as valid
arm64: Enforce bounce buffers for realm DMA
efi: arm64: Map Device with Prot Shared
arm64: rsi: Map unprotected MMIO as decrypted
arm64: rsi: Add support for checking whether an MMIO is protected
arm64: realm: Query IPA size from the RMM
arm64: Detect if in a realm and set RIPAS RAM
arm64: rsi: Add RSI definitions
* for-next/haft:
: Support for arm64 FEAT_HAFT
arm64: pgtable: Warn unexpected pmdp_test_and_clear_young()
arm64: Enable ARCH_HAS_NONLEAF_PMD_YOUNG
arm64: Add support for FEAT_HAFT
arm64: setup: name 'tcr2' register
arm64/sysreg: Update ID_AA64MMFR1_EL1 register
* for-next/scs:
: Dynamic shadow call stack fixes
arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux()
arm64/scs: Deal with 64-bit relative offsets in FDE frames
arm64/scs: Fix handling of DWARF augmentation data in CIE/FDE frames
|
|
The is_mgtime test checks whether the FS_MGTIME flag is set in the
fstype. To get there from the inode though, we have to dereference 3
pointers.
Add a new IOP_MGTIME flag, and have inode_init_always() set that flag
when the fstype flag is set. Then, make is_mgtime test for IOP_MGTIME
instead.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241113-mgtime-v1-1-84e256980e11@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
It literally directly follows a spin_lock() call.
This whacks an explicit barrier on x86-64.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20241113155103.4194099-1-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
As the size of a directory increases item creation slows down.
Optimizing access to s_children removes this bottleneck.
dirents are already pinned into the cache, there is no need to scan the
s_children list looking for duplicate Items. The configfs_dirent_exists
check is moved to a location where it is called only during subsystem
initialization.
d_lookup will only need to call configfs_lookup in the case where the
item in question is not pinned to dcache. The only items not pinned to
dcache are attributes. These are placed at the front of the s_children
list, whilst pinned items are inserted at the back. configfs_lookup
stops scanning when it encounters the first pinned entry in s_children.
The assumption of the above optimizations is that there will be few
attributes, but potentially many Items in a given directory.
Signed-off-by: Seamus Connor <sconnor@purestorage.com>
Reviewed-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
configfs_hash_and_remove() has been unused since it was added in 2005
by commit
7063fbf22611 ("[PATCH] configfs: User-driven configuration filesystem")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Call blk_validate_limits on the queue limits used for zone append
splitting so that calculated values get filled in and any stacking
conflicts get cought.
Without this there isn't a max_zone_append_sectors limits as of commit
559218d43ec9 ("block: pre-calculate max_zone_append_sectors").
Fixes: 559218d43ec9 ("block: pre-calculate max_zone_append_sectors")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241113084541.34315-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The code indicates that journal_init_common() fills the journal_t object
it returns while the comment incorrectly states that only a few fields are
initialised. Also, the comment claims that journal structures could be
created from scratch which isn't possible as journal_init_common() calls
journal_load_superblock() which loads and checks journal superblock from
disk.
Signed-off-by: Daniel Martín Gómez <dalme@riseup.net>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20241107144538.3544-1-dalme@riseup.net
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Use ktime_get_ns instead of ktime_get_real_ns when computing the lr_timeout
not to be affected by system time jumps.
Use a boolean instead of the MAX_JIFFY_OFFSET value to determine whether
the next_wakeup value has been set. Comparing elr->lr_next_sched to
MAX_JIFFY_OFFSET can cause the lazyinit thread to loop indefinitely.
Co-developed-by: Lukas Skupinski <lukas.skupinski@landisgyr.com>
Signed-off-by: Lukas Skupinski <lukas.skupinski@landisgyr.com>
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241106134741.26948-2-othacehe@gnu.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Inline and use struct_size() to calculate the number of bytes to
allocate for new_fn and remove the local variable len.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20241105103353.11590-2-thorsten.blum@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
