| Age | Commit message (Collapse) | Author |
|---|
|
Add the service routines for submitting and processing
the adminq messages and for handling notifyq events.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set up the basic adminq and notifyq queue structures. These are
used mostly by the client drivers for feature configuration.
These are essentially the same adminq and notifyq as in the
ionic driver.
Part of this includes querying for device identity and FW
information, so we can make that available to devlink dev info.
$ devlink dev info pci/0000:b5:00.0
pci/0000:b5:00.0:
driver pds_core
serial_number FLM18420073
versions:
fixed:
asic.id 0x0
asic.rev 0x0
running:
fw 1.51.0-73
stored:
fw.goldfw 1.15.9-C-22
fw.mainfwa 1.60.0-73
fw.mainfwb 1.60.0-57
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The devcmd interface is the basic connection to the device through the
PCI BAR for low level identification and command services. This does
the early device initialization and finds the identity data, and adds
devcmd routines to be used by later driver bits.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is the initial PCI driver framework for the new pds_core device
driver and its family of devices. This does the very basics of
registering for the new PF PCI device 1dd8:100c, setting up debugfs
entries, and registering with devlink.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add two internal flags that will be used to enable / disable per-{Port,
VLAN} neighbor suppression:
1. 'BR_NEIGH_VLAN_SUPPRESS': A per-port flag used to indicate that
per-{Port, VLAN} neighbor suppression is enabled on the bridge port.
When set, 'BR_NEIGH_SUPPRESS' has no effect.
2. 'BR_VLFLAG_NEIGH_SUPPRESS_ENABLED': A per-VLAN flag used to indicate
that neighbor suppression is enabled on the given VLAN.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch deletes the flexible-array payload[] from the structure
sctp_datahdr to avoid some sparse warnings:
# make C=2 CF="-Wflexible-array-nested" M=./net/sctp/
net/sctp/socket.c: note: in included file (through include/net/sctp/structs.h, include/net/sctp/sctp.h):
./include/linux/sctp.h:230:29: warning: nested flexible array
This member is not even used anywhere.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch deletes the flexible-array hmac[] from the structure
sctp_authhdr to avoid some sparse warnings:
# make C=2 CF="-Wflexible-array-nested" M=./net/sctp/
net/sctp/auth.c: note: in included file (through include/net/sctp/structs.h, include/net/sctp/sctp.h):
./include/linux/sctp.h:735:29: warning: nested flexible array
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch deletes the flexible-array variable[] from the structure
sctp_sackhdr and sctp_errhdr to avoid some sparse warnings:
# make C=2 CF="-Wflexible-array-nested" M=./net/sctp/
net/sctp/sm_statefuns.c: note: in included file (through include/net/sctp/structs.h, include/net/sctp/sctp.h):
./include/linux/sctp.h:451:28: warning: nested flexible array
./include/linux/sctp.h:393:29: warning: nested flexible array
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch deletes the flexible-array skip[] from the structure
sctp_ifwdtsn/fwdtsn_hdr to avoid some sparse warnings:
# make C=2 CF="-Wflexible-array-nested" M=./net/sctp/
net/sctp/stream_interleave.c: note: in included file (through include/net/sctp/structs.h, include/net/sctp/sctp.h):
./include/linux/sctp.h:611:32: warning: nested flexible array
./include/linux/sctp.h:628:33: warning: nested flexible array
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch deletes the flexible-array params[] from the structure
sctp_inithdr, sctp_addiphdr and sctp_reconf_chunk to avoid some
sparse warnings:
# make C=2 CF="-Wflexible-array-nested" M=./net/sctp/
net/sctp/input.c: note: in included file (through include/net/sctp/structs.h, include/net/sctp/sctp.h):
./include/linux/sctp.h:278:29: warning: nested flexible array
./include/linux/sctp.h:675:30: warning: nested flexible array
This warning is reported if a structure having a flexible array
member is included by other structures.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The virtio_ring header file uses the struct device without a forward
declaration.
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Message-Id: <20230417022037.917668-1-mie@igel.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add VIRTIO_F_NOTIFICATION_DATA support for vDPA transport.
If this feature is negotiated, the driver passes extra data when kicking
a virtqueue.
A device that offers this feature needs to implement the
kick_vq_with_data callback.
kick_vq_with_data receives the vDPA device and data.
data includes:
16 bits vqn and 16 bits next available index for split virtqueues.
16 bits vqs, 15 least significant bits of next available index
and 1 bit next_wrap for packed virtqueues.
This patch follows a patch [1] by Viktor Prutyanov which adds support
for the MMIO, channel I/O and modern PCI transports.
Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Message-Id: <20230413081855.36643-3-alvaro.karsz@solid-run.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
According to VirtIO spec v1.2, VIRTIO_F_NOTIFICATION_DATA feature
indicates that the driver passes extra data along with the queue
notifications.
In a split queue case, the extra data is 16-bit available index. In a
packed queue case, the extra data is 1-bit wrap counter and 15-bit
available index.
Add support for this feature for MMIO, channel I/O and modern PCI
transports.
Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20230413081855.36643-2-alvaro.karsz@solid-run.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Address some minor kdoc warnings in vring.h.
* Place kdoc for 'struct vringh_config_ops' immediately before the structure
* Add missing documentation of members of 'vringh_iov' and 'vringh_kiov'
Warnings flagged by:
$ ./scripts/kernel-doc -none include/linux/vringh.h
include/linux/vringh.h:68: error: Cannot parse struct or union!
include/linux/vringh.h:92: warning: Function parameter or member 'iov' not described in 'vringh_iov'
include/linux/vringh.h:92: warning: Function parameter or member 'consumed' not described in 'vringh_iov'
include/linux/vringh.h:92: warning: Function parameter or member 'i' not described in 'vringh_iov'
include/linux/vringh.h:92: warning: Function parameter or member 'used' not described in 'vringh_iov'
include/linux/vringh.h:92: warning: Function parameter or member 'max_num' not described in 'vringh_iov'
include/linux/vringh.h:104: warning: Function parameter or member 'iov' not described in 'vringh_kiov'
include/linux/vringh.h:104: warning: Function parameter or member 'consumed' not described in 'vringh_kiov'
include/linux/vringh.h:104: warning: Function parameter or member 'i' not described in 'vringh_kiov'
include/linux/vringh.h:104: warning: Function parameter or member 'used' not described in 'vringh_kiov'
include/linux/vringh.h:104: warning: Function parameter or member 'max_num' not described in 'vringh_kiov'
Signed-off-by: Simon Horman <horms@kernel.org>
Message-Id: <20230331-vhost-fixes-v1-2-1f046e735b9e@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patch addresses the following minor kdoc problems.
* Incorrect spelling of 'callback' and 'notification'
* Unrecognised kdoc format for 'struct vdpa_map_file'
* Missing documentation of 'get_vendor_vq_stats' member of
'struct vdpa_config_ops'
* Missing documentation of 'max_supported_vqs' and 'supported_features'
members of 'struct vdpa_mgmt_dev'
Most of these problems were flagged by:
$ ./scripts/kernel-doc -Werror -none include/linux/vdpa.h
include/linux/vdpa.h:20: warning: expecting prototype for struct vdpa_calllback. Prototype was for struct vdpa_callback instead
include/linux/vdpa.h:117: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Corresponding file area for device memory mapping
include/linux/vdpa.h:357: warning: Function parameter or member 'get_vendor_vq_stats' not described in 'vdpa_config_ops'
include/linux/vdpa.h:518: warning: Function parameter or member 'supported_features' not described in 'vdpa_mgmt_dev'
include/linux/vdpa.h:518: warning: Function parameter or member 'max_supported_vqs' not described in 'vdpa_mgmt_dev'
The misspelling of 'notification' was flagged by:
$ ./scripts/checkpatch.pl --codespell --showfile --strict -f include/linux/vdpa.h
include/linux/vdpa.h:171: CHECK: 'notifcation' may be misspelled - perhaps 'notification'?
...
Signed-off-by: Simon Horman <horms@kernel.org>
Message-Id: <20230331-vhost-fixes-v1-1-1f046e735b9e@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
vDPA supports the possibility to use user VA in the iotlb messages.
So, let's add support for user VA in vringh to use it in the vDPA
simulators.
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20230404131716.45855-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
These new optional callbacks is used to bind/unbind the device to
a specific address space so the vDPA framework can use VA when
these callbacks are implemented.
Suggested-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20230404131326.44403-2-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add eventfd for the vdpa callback so that user
can signal it directly instead of triggering the
callback. It will be used for vhost-vdpa case.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Message-Id: <20230323053043.35-9-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
This introduces set/get_vq_affinity callbacks in
vdpa_config_ops to support virtqueue affinity
management for vdpa device drivers.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230323053043.35-3-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add const to make the read-only pointer parameters clear, similar to
many existing functions.
To implement this change, the commit also introduces the use of
`container_of_const` to implement `to_vvq`, which ensures the const-ness
of read-only parameters and avoids accidental modification of their
members.
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Bodong Wang <bodong@nvidia.com>
Message-Id: <20230310053428.3376-4-feliu@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Group some variables based on their sizes to reduce hole and avoid padding.
On x86_64, this shrinks the size of 'struct virtqueue'
from 72 to 68 bytes.
It saves a few bytes of memory.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <8f3d2e49270a2158717e15008e7ed7228196ba02.1676707807.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Peter Lafreniere <peter@n8pjl.ca>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
This will, after the next patch, hold only the core
drop reasons and minimal infrastructure. Fix a small
kernel-doc issue while at it, to avoid the move
triggering a checker.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
lookups by descriptor are better off closer to syscall surface...
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Pass the dentry of a source file and the dentry of a destination directory
to lock parent inodes for rename. As soon as this function returns,
->d_parent of the source file dentry is stable and inodes are properly
locked for calling vfs-rename. This helper is needed for ksmbd server.
rename request of SMB protocol has to rename an opened file, no matter
which directory it's in.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Since vfs_path_lookup is exported, It should not be internal.
Move vfs_path_lookup prototype in internal.h to linux/namei.h.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
__kfree_skb_defer() uses the old naming where "defer" meant
slab bulk free/alloc APIs. In the meantime we also made
__kfree_skb_defer() feed the per-NAPI skb cache, which
implies bulk APIs. So take away the 'defer' and add 'napi'.
While at it add a drop reason. This only matters on the
tx_action path, if the skb has a frag_list. But getting
rid of a SKB_DROP_REASON_NOT_SPECIFIED seems like a net
benefit so why not.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230420020005.815854-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To be consistent with the other enum keys use OP_MOD
instead of OP_MODE.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Create a vnic devlink health reporter for PFs/VFs interfaces.
The reporter's diagnose callback displays the values of vNIC/vport
transport debug counters of PFs/VFs, as follows:
$ devlink health diagnose pci/0000:08:00.0 reporter vnic
vNIC env counters:
total_error_queues: 0 send_queue_priority_update_flow: 0
comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0
invalid_command: 0 quota_exceeded_command: 0
nic_receive_steering_discard: 0
Moreover, add documentation on the reporter functionality and the
counters description.
While at it, expose the vNIC counters diagnose function to be used by
the downstream patch, which will reveal the counters for representor
interfaces.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Adjacent changes:
net/mptcp/protocol.h
63740448a32e ("mptcp: fix accept vs worker race")
2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close")
ddb1a072f858 ("mptcp: move first subflow allocation at mpc access time")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and bpf.
There are a few fixes for new code bugs, including the Mellanox one
noted in the last networking pull. No known regressions outstanding.
Current release - regressions:
- sched: clear actions pointer in miss cookie init fail
- mptcp: fix accept vs worker race
- bpf: fix bpf_arch_text_poke() with new_addr == NULL on s390
- eth: bnxt_en: fix a possible NULL pointer dereference in unload
path
- eth: veth: take into account peer device for
NETDEV_XDP_ACT_NDO_XMIT xdp_features flag
Current release - new code bugs:
- eth: revert "net/mlx5: Enable management PF initialization"
Previous releases - regressions:
- netfilter: fix recent physdev match breakage
- bpf: fix incorrect verifier pruning due to missing register
precision taints
- eth: virtio_net: fix overflow inside xdp_linearize_page()
- eth: cxgb4: fix use after free bugs caused by circular dependency
problem
- eth: mlxsw: pci: fix possible crash during initialization
Previous releases - always broken:
- sched: sch_qfq: prevent slab-out-of-bounds in qfq_activate_agg
- netfilter: validate catch-all set elements
- bridge: don't notify FDB entries with "master dynamic"
- eth: bonding: fix memory leak when changing bond type to ethernet
- eth: i40e: fix accessing vsi->active_filters without holding lock
Misc:
- Mat is back as MPTCP co-maintainer"
* tag 'net-6.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (33 commits)
net: bridge: switchdev: don't notify FDB entries with "master dynamic"
Revert "net/mlx5: Enable management PF initialization"
MAINTAINERS: Resume MPTCP co-maintainer role
mailmap: add entries for Mat Martineau
e1000e: Disable TSO on i219-LM card to increase speed
bnxt_en: fix free-runnig PHC mode
net: dsa: microchip: ksz8795: Correctly handle huge frame configuration
bpf: Fix incorrect verifier pruning due to missing register precision taints
hamradio: drop ISA_DMA_API dependency
mlxsw: pci: Fix possible crash during initialization
mptcp: fix accept vs worker race
mptcp: stops worker on unaccepted sockets at listener close
net: rpl: fix rpl header size calculation
net: vmxnet3: Fix NULL pointer dereference in vmxnet3_rq_rx_complete()
bonding: Fix memory leak when changing bond type to Ethernet
veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features flag
mlxfw: fix null-ptr-deref in mlxfw_mfa2_tlv_next()
bnxt_en: Fix a possible NULL pointer dereference in unload path
bnxt_en: Do not initialize PTP on older P3/P4 chips
netfilter: nf_tables: tighten netlink attribute requirements for catch-all elements
...
|
|
Userspace can't easily discover how much of a sleep cycle was spent in a
hardware sleep state without using kernel tracing and vendor specific sysfs
or debugfs files.
To make this information more discoverable, introduce 3 new sysfs files:
1) The time spent in a hw sleep state for last cycle.
2) The time spent in a hw sleep state since the kernel booted
3) The maximum time that the hardware can report for a sleep cycle.
All of these files will be present only if the system supports s2idle.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* for-next/perf: (24 commits)
KVM: arm64: Ensure CPU PMU probes before pKVM host de-privilege
drivers/perf: hisi: add NULL check for name
drivers/perf: hisi: Remove redundant initialized of pmu->name
perf/arm-cmn: Fix port detection for CMN-700
arm64: pmuv3: dynamically map PERF_COUNT_HW_BRANCH_INSTRUCTIONS
perf/arm-cmn: Validate cycles events fully
Revert "ARM: mach-virt: Select PMUv3 driver by default"
drivers/perf: apple_m1: Add Apple M2 support
dt-bindings: arm-pmu: Add PMU compatible strings for Apple M2 cores
perf: arm_cspmu: Fix variable dereference warning
perf/amlogic: Fix config1/config2 parsing issue
drivers/perf: Use devm_platform_get_and_ioremap_resource()
kbuild, drivers/perf: remove MODULE_LICENSE in non-modules
perf: qcom: Use devm_platform_get_and_ioremap_resource()
perf: arm: Use devm_platform_get_and_ioremap_resource()
perf/arm-cmn: Move overlapping wp_combine field
ARM: mach-virt: Select PMUv3 driver by default
ARM: perf: Allow the use of the PMUv3 driver on 32bit ARM
ARM: Make CONFIG_CPU_V7 valid for 32bit ARMv8 implementations
perf: pmuv3: Change GENMASK to GENMASK_ULL
...
|
|
The latest version of your favorite fork of the PE/COFF spec includes a
new type of header flag that is intended to be used in the context of
EFI firmware to indicate to the image loader that the executable regions
of an image can be mapped with BTI/IBT enforcement enabled.
So let's import these definitions so we can use them in subsequent
patches.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The tracking of used_hiwater adds an atomic operation to the hot
path. This is acceptable only when debugging the kernel. To make
sure that the fields can never be used by mistake, do not even
include them in struct io_tlb_mem if CONFIG_DEBUG_FS is not set.
The build fails after doing that. To fix it, it is necessary to
remove all code specific to debugfs and instead provide a stub
implementation of swiotlb_create_debugfs_files(). As a bonus, this
change allows to remove one __maybe_unused attribute.
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
device_property functions do not modify the device pointer passed to them.
The underlying of_device and fwnode_ functions actually already take
const * arguments. Mark the parameter constant to simplify conversion
from of_property to device_property functions, and to let the calling code
use const device pointers where possible.
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230419164127.3773278-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
* for-next/misc:
arm64: kexec: include reboot.h
arm64: delete dead code in this_cpu_set_vectors()
arm64: kernel: Fix kernel warning when nokaslr is passed to commandline
arm64: kgdb: Set PSTATE.SS to 1 to re-enable single-step
arm64/sme: Fix some comments of ARM SME
arm64/signal: Alloc tpidr2 sigframe after checking system_supports_tpidr2()
arm64/signal: Use system_supports_tpidr2() to check TPIDR2
arm64: compat: Remove defines now in asm-generic
arm64: kexec: remove unnecessary (void*) conversions
arm64: armv8_deprecated: remove unnecessary (void*) conversions
firmware: arm_sdei: Fix sleep from invalid context BUG
|
|
Currently the PSP semaphore communication base address is discovered
by using an MSR that is not architecturally guaranteed for future
platforms. Also the mailbox that is utilized for communication with
the PSP may have other consumers in the kernel, so it's better to
make all communication go through a single driver.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mark Hasemeyer <markhas@chromium.org>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Mark Hasemeyer <markhas@chromium.org>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add a crypto_tfm_get interface to allow tfm objects to be shared.
They can still be freed in the usual way.
This should only be done with tfm objects with no keys. You must
also not modify the tfm flags in any way once it becomes shared.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Many of the older USB drivers in the Linux USB stack were written
based simply on a vendor's device specification. They use the
endpoint information in the spec and assume these endpoints will
always be present, with the properties listed, in any device matching
the given vendor and product IDs.
While that may have been true back then, with spoofing and fuzzing it
is not true any more. More and more we are finding that those old
drivers need to perform at least a minimum of checking before they try
to use any endpoint other than ep0.
To make this checking as simple as possible, we now add a couple of
utility routines to the USB core. usb_check_bulk_endpoints() and
usb_check_int_endpoints() take an interface pointer together with a
list of endpoint addresses (numbers and directions). They check that
the interface's current alternate setting includes endpoints with
those addresses and that each of these endpoints has the right type:
bulk or interrupt, respectively.
Although we already have usb_find_common_endpoints() and related
routines meant for a similar purpose, they are not well suited for
this kind of checking. Those routines find endpoints of various
kinds, but only one (either the first or the last) of each kind, and
they don't verify that the endpoints' addresses agree with what the
caller expects.
In theory the new routines could be more general: They could take a
particular altsetting as their argument instead of always using the
interface's current altsetting. In practice I think this won't matter
too much; multiple altsettings tend to be used for transferring media
(audio or visual) over isochronous endpoints, not bulk or interrupt.
Drivers for such devices will generally require more sophisticated
checking than these simplistic routines provide.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/dd2c8e8c-2c87-44ea-ba17-c64b97e201c9@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit fe998a3c77b9f989a30a2a01fb00d3729a6d53a4.
Paul reports that it causes a regression with IB on CX4
and FW 12.18.1000. In addition I think that the concept
of "management PF" is not fully accepted and requires
a discussion.
Fixes: fe998a3c77b9 ("net/mlx5: Enable management PF initialization")
Reported-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/all/CAHC9VhQ7A4+msL38WpbOMYjAqLp0EtOjeLh4Dc6SQtD6OUvCQg@mail.gmail.com/
Link: https://lore.kernel.org/r/20230413222547.56901-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"22 hotfixes.
19 are cc:stable and the remainder address issues which were
introduced during this merge cycle, or aren't considered suitable for
-stable backporting.
19 are for MM and the remainder are for other subsystems"
* tag 'mm-hotfixes-stable-2023-04-19-16-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
nilfs2: initialize unused bytes in segment summary blocks
mm: page_alloc: skip regions with hugetlbfs pages when allocating 1G pages
mm/mmap: regression fix for unmapped_area{_topdown}
maple_tree: fix mas_empty_area() search
maple_tree: make maple state reusable after mas_empty_area_rev()
mm: kmsan: handle alloc failures in kmsan_ioremap_page_range()
mm: kmsan: handle alloc failures in kmsan_vmap_pages_range_noflush()
tools/Makefile: do missed s/vm/mm/
mm: fix memory leak on mm_init error handling
mm/page_alloc: fix potential deadlock on zonelist_update_seq seqlock
kernel/sys.c: fix and improve control flow in __sys_setres[ug]id()
Revert "userfaultfd: don't fail on unrecognized features"
writeback, cgroup: fix null-ptr-deref write in bdi_split_work_to_wbs
maple_tree: fix a potential memory leak, OOB access, or other unpredictable bug
tools/mm/page_owner_sort.c: fix TGID output when cull=tg is used
mailmap: update jtoppins' entry to reference correct email
mm/mempolicy: fix use-after-free of VMA iterator
mm/huge_memory.c: warn with pr_warn_ratelimited instead of VM_WARN_ON_ONCE_FOLIO
mm/mprotect: fix do_mprotect_pkey() return on error
mm/khugepaged: check again on anon uffd-wp during isolation
...
|
|
Currently call_bind_status places a hard limit of 3 to the number of
retries on EACCES error. This limit was done to prevent NLM unlock
requests from being hang forever when the server keeps returning garbage.
However this change causes problem for cases when NLM service takes
longer than 9 seconds to register with the port mapper after a restart.
This patch removes this hard coded limit and let the RPC handles
the retry based on the standard hard/soft task semantics.
Fixes: 0b760113a3a1 ("NLM: Don't hang forever on NLM unlock requests")
Reported-by: Helen Chao <helen.chao@oracle.com>
Tested-by: Helen Chao <helen.chao@oracle.com>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Locking range start and locking range length
attributes may be require to satisfy restrictions
exposed by OPAL2 geometry feature reporting.
Geometry reporting feature is described in TCG OPAL SSC,
section 3.1.1.4 (ALIGN, LogicalBlockSize, AlignmentGranularity
and LowestAlignedLBA).
4.3.5.2.1.1 RangeStart Behavior:
[ StartAlignment = (RangeStart modulo AlignmentGranularity) - LowestAlignedLBA ]
When processing a Set method or CreateRow method on the Locking
table for a non-Global Range row, if:
a) the AlignmentRequired (ALIGN above) column in the LockingInfo
table is TRUE;
b) RangeStart is non-zero; and
c) StartAlignment is non-zero, then the method SHALL fail and
return an error status code INVALID_PARAMETER.
4.3.5.2.1.2 RangeLength Behavior:
If RangeStart is zero, then
[ LengthAlignment = (RangeLength modulo AlignmentGranularity) - LowestAlignedLBA ]
If RangeStart is non-zero, then
[ LengthAlignment = (RangeLength modulo AlignmentGranularity) ]
When processing a Set method or CreateRow method on the Locking
table for a non-Global Range row, if:
a) the AlignmentRequired (ALIGN above) column in the LockingInfo
table is TRUE;
b) RangeLength is non-zero; and
c) LengthAlignment is non-zero, then the method SHALL fail and
return an error status code INVALID_PARAMETER
In userspace we stuck to logical block size reported by general
block device (via sysfs or ioctl), but we can not read
'AlignmentGranularity' or 'LowestAlignedLBA' anywhere else and
we need to get those values from sed-opal interface otherwise
we will not be able to report or avoid locking range setup
INVALID_PARAMETER errors above.
Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Tested-by: Milan Broz <gmazyland@gmail.com>
Link: https://lore.kernel.org/r/20230411090931.9193-2-okozina@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Raw NAND core changes:
* Convert to platform remove callback returning void
* Fix spelling mistake waifunc() -> waitfunc()
Raw NAND controller driver changes:
* imx: Remove unused is_imx51_nfc and imx53_nfc functions
* omap2: Drop obsolete dependency on COMPILE_TEST
* orion: Use devm_platform_ioremap_resource()
* qcom:
- Use of_property_present() for testing DT property presence
- Use devm_platform_get_and_ioremap_resource()
* stm32_fmc2: Depends on ARCH_STM32 instead of MACH_STM32MP157
* tmio: Remove reference to config MTD_NAND_TMIO in the parsers
Raw NAND manufacturer driver changes:
* hynix: Fix up bit 0 of sdr_timing_mode
SPI-NAND changes:
* Add support for ESMT F50x1G41LB
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into driver-core-next
Sudeep writes:
cacheinfo and arch_topology updates for v6.4
The cache information can be extracted from either a Device Tree(DT),
the PPTT ACPI table, or arch registers (clidr_el1 for arm64).
When the DT is used but no cache properties are advertised, the current
code doesn't correctly fallback to using arch information. The changes
fixes the same and also assuse the that L1 data/instruction caches
are private and L2/higher caches are shared when the cache information
is missing in DT/ACPI and is derived form clidr_el1/arch registers.
Currently the cacheinfo is built from the primary CPU prior to secondary
CPUs boot, if the DT/ACPI description contains cache information.
However, if not present, it still reverts to the old behavior, which
allocates the cacheinfo memory on each secondary CPUs which causes
RT kernels to triggers a "BUG: sleeping function called from invalid
context".
The changes here attempts to enable automatic detection for RT kernels
when no DT/ACPI cache information is available, by pre-allocating
cacheinfo memory on the primary CPU.
* tag 'cacheinfo-updates-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.4
This pull request contains the interconnect changes for the 6.4-rc1 merge
window, which this time are mostly cleanups.
Core changes:
interconnect: Skip call into provider if initial bw is zero
interconnect: Use of_property_present() for testing DT property presence
interconnect: drop racy registration API
interconnect: drop unused icc_link_destroy() interface
Driver changes:
interconnect: qcom: Drop obsolete dependency on COMPILE_TEST
interconnect: qcom: drop obsolete OSM_L3/EPSS defines
interconnect: qcom: osm-l3: drop unuserd header inclusion
interconnect: qcom: rpm: drop bogus pm domain attach
interconnect: qcom: rpm: make QoS INVALID default
interconnect: qcom: rpm: Add support for specifying channel num
interconnect: qcom: Sort kerneldoc entries
dt-bindings: interconnect: OSM L3: Add SM6375 CPUCP compatible
dt-bindings: interconnect: qcom,msm8998-bwmon: Resolve MSM8998 support
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
dt-bindings: interconnect: qcom,msm8998-bwmon: Resolve MSM8998 support
dt-bindings: interconnect: OSM L3: Add SM6375 CPUCP compatible
interconnect: qcom: Sort kerneldoc entries
interconnect: qcom: rpm: Add support for specifying channel num
interconnect: qcom: rpm: make QoS INVALID default
interconnect: qcom: rpm: drop bogus pm domain attach
interconnect: drop unused icc_link_destroy() interface
interconnect: drop racy registration API
interconnect: Use of_property_present() for testing DT property presence
interconnect: qcom: osm-l3: drop unuserd header inclusion
interconnect: qcom: drop obsolete OSM_L3/EPSS defines
interconnect: Skip call into provider if initial bw is zero
interconnect: qcom: Drop obsolete dependency on COMPILE_TEST
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next
Manivannan writes:
MHI Host
========
Core
----
- Removed the "mhi_poll()" API as there are no in-kernel users available at the
moment.
- Added range check for the CHDBOFF and ERDBOFF registers in case the device
reports bad values.
- Fixed the errno for the rest of the range checks to use -ERANGE.
- Modified the event ring handlers to ring the doorbell only if there are
any pending elements in the ring to process for the device.
- Removed the check for EE (Execution Environment) while processing the SYS_ERR
transition as it creates device recovery issues when SBL (Secondary
Bootloader) crashes early.
- Used mhi_tryset_pm_state() API to set the error state instead of open coding
if the firmware loading fails. This avoids the race with other pm_state
updates.
pci_generic
-----------
- Dropped the dedundant pci_{enable/disable}_pcie_error_reporting() calls from
driver probe's error path as the PCI core itself takes care of that now.
- Revered the commit 2d5253a096c6 ("bus: mhi: host: pci_generic: Add a secondary
AT port to Telit FN990") as it turned out to be erroneous. This happened due
to the patch adding secondary AT port for FN990 getting applied through NET
and MHI trees and this caused two commits for the same functionality but one
of them ended up wrong.
- Added support for Foxconn T99W510 modem based on SDX24 chipset from Qualcomm.
MHI Endpoint
============
- Demoted the channel not supported error log to debug as not all devices will
support all channels defined in MHI spec and this may spam users.
* tag 'mhi-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: host: Use mhi_tryset_pm_state() for setting fw error state
bus: mhi: host: Remove duplicate ee check for syserr
bus: mhi: host: Avoid ringing EV DB if there are no elements to process
bus: mhi: pci_generic: Add Foxconn T99W510
bus: mhi: host: Use ERANGE for BHIOFF/BHIEOFF range check
bus: mhi: host: Range check CHDBOFF and ERDBOFF
bus: mhi: host: pci_generic: Revert "Add a secondary AT port to Telit FN990"
bus: mhi: host: pci_generic: Drop redundant pci_enable_pcie_error_reporting()
bus: mhi: ep: Demote unsupported channel error log to debug
bus: mhi: host: Remove mhi_poll() API
|
|
Accesses to nf_trace and ipvs_property are already wrapped
by ifdefs where necessary. Don't allocate the bits for those
fields at all if possible.
Acked-by: Florian Westphal <fw@strlen.de>
Acked-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
nf_trace is a debug feature, AFAIU, and yet it sits oddly
high in the sk_buff bitfield. Move it down, pushing up
dst_pending_confirm and inner_protocol_type.
Next change will make nf_trace optional (under Kconfig)
and all optional fields should be placed after 2b fields
to avoid 2b fields straddling bytes.
dst_pending_confirm is L3, so it makes sense next to ignore_df.
inner_protocol_type goes up just to keep the balance.
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
alloc_cpu is currently between 4 byte fields, so it's almost
guaranteed to create a 2B hole. It has a knock on effect of
creating a 4B hole after @end (and @end and @tail being in
different cachelines).
None of this matters hugely, but for kernel configs which
don't enable all the features there may well be a 2B hole
after the bitfield. Move alloc_cpu there.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
