| Age | Commit message (Collapse) | Author |
|---|
|
Tighten csum_start and csum_offset checks in virtio_net_hdr_to_skb
for GSO packets.
The function already checks that a checksum requested with
VIRTIO_NET_HDR_F_NEEDS_CSUM is in skb linear. But for GSO packets
this might not hold for segs after segmentation.
Syzkaller demonstrated to reach this warning in skb_checksum_help
offset = skb_checksum_start_offset(skb);
ret = -EINVAL;
if (WARN_ON_ONCE(offset >= skb_headlen(skb)))
By injecting a TSO packet:
WARNING: CPU: 1 PID: 3539 at net/core/dev.c:3284 skb_checksum_help+0x3d0/0x5b0
ip_do_fragment+0x209/0x1b20 net/ipv4/ip_output.c:774
ip_finish_output_gso net/ipv4/ip_output.c:279 [inline]
__ip_finish_output+0x2bd/0x4b0 net/ipv4/ip_output.c:301
iptunnel_xmit+0x50c/0x930 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x2296/0x2c70 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x759/0xa60 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4850 [inline]
netdev_start_xmit include/linux/netdevice.h:4864 [inline]
xmit_one net/core/dev.c:3595 [inline]
dev_hard_start_xmit+0x261/0x8c0 net/core/dev.c:3611
__dev_queue_xmit+0x1b97/0x3c90 net/core/dev.c:4261
packet_snd net/packet/af_packet.c:3073 [inline]
The geometry of the bad input packet at tcp_gso_segment:
[ 52.003050][ T8403] skb len=12202 headroom=244 headlen=12093 tailroom=0
[ 52.003050][ T8403] mac=(168,24) mac_len=24 net=(192,52) trans=244
[ 52.003050][ T8403] shinfo(txflags=0 nr_frags=1 gso(size=1552 type=3 segs=0))
[ 52.003050][ T8403] csum(0x60000c7 start=199 offset=1536
ip_summed=3 complete_sw=0 valid=0 level=0)
Mitigate with stricter input validation.
csum_offset: for GSO packets, deduce the correct value from gso_type.
This is already done for USO. Extend it to TSO. Let UFO be:
udp[46]_ufo_fragment ignores these fields and always computes the
checksum in software.
csum_start: finding the real offset requires parsing to the transport
header. Do not add a parser, use existing segmentation parsing. Thanks
to SKB_GSO_DODGY, that also catches bad packets that are hw offloaded.
Again test both TSO and USO. Do not test UFO for the above reason, and
do not test UDP tunnel offload.
GSO packet are almost always CHECKSUM_PARTIAL. USO packets may be
CHECKSUM_NONE since commit 10154dbded6d6 ("udp: Allow GSO transmit
from devices with no checksum offload"), but then still these fields
are initialized correctly in udp4_hwcsum/udp6_hwcsum_outgoing. So no
need to test for ip_summed == CHECKSUM_PARTIAL first.
This revises an existing fix mentioned in the Fixes tag, which broke
small packets with GSO offload, as detected by kselftests.
Link: https://syzkaller.appspot.com/bug?extid=e1db31216c789f552871
Link: https://lore.kernel.org/netdev/20240723223109.2196886-1-kuba@kernel.org
Fixes: e269d79c7d35 ("net: missing check virtio")
Cc: stable@vger.kernel.org
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240729201108.1615114-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This clarifies the rules for min()/max()/clamp() type checking and makes
them a much more efficient macro expansion.
In particular, we now look at the type and range of the inputs to see
whether they work together, generating a mask of acceptable comparisons,
and then just verifying that the inputs have a shared case:
- an expression with a signed type can be used for
(1) signed comparisons
(2) unsigned comparisons if it is statically known to have a
non-negative value
- an expression with an unsigned type can be used for
(3) unsigned comparison
(4) signed comparisons if the type is smaller than 'int' and thus
the C integer promotion rules will make it signed anyway
Here rule (1) and (3) are obvious, and rule (2) is important in order to
allow obvious trivial constants to be used together with unsigned
values.
Rule (4) is not necessarily a good idea, but matches what we used to do,
and we have extant cases of this situation in the kernel. Notably with
bcachefs having an expression like
min(bch2_bucket_sectors_dirty(a), ca->mi.bucket_size)
where bch2_bucket_sectors_dirty() returns an 's64', and
'ca->mi.bucket_size' is of type 'u16'.
Technically that bcachefs comparison is clearly sensible on a C type
level, because the 'u16' will go through the normal C integer promotion,
and become 'int', and then we're comparing two signed values and
everything looks sane.
However, it's not entirely clear that a 'min(s64,u16)' operation makes a
lot of conceptual sense, and it's possible that we will remove rule (4).
After all, the _reason_ we have these complicated type checks is exactly
that the C type promotion rules are not very intuitive.
But at least for now the rule is in place for backwards compatibility.
Also note that rule (2) existed before, but is hugely relaxed by this
commit. It used to be true only for the simplest compile-time
non-negative integer constants. The new macro model will allow cases
where the compiler can trivially see that an expression is non-negative
even if it isn't necessarily a constant.
For example, the amdgpu driver does
min_t(size_t, sizeof(fru_info->serial), pia[addr] & 0x3F));
because our old 'min()' macro would see that 'pia[addr] & 0x3F' is of
type 'int' and clearly not a C constant expression, so doing a 'min()'
with a 'size_t' is a signedness violation.
Our new 'min()' macro still sees that 'pia[addr] & 0x3F' is of type
'int', but is smart enough to also see that it is clearly non-negative,
and thus would allow that case without any complaints.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull virtio fixes from Michael Tsirkin:
"The biggest thing here is the adminq change - but it looks like the
only way to avoid headq blocking causing indefinite stalls.
This fixes three issues:
- Prevent admin commands on one VF blocking another.
This prevents a bad VF from blocking a good one, as well as fixing
a scalability issue with large # of VFs
- Correctly return error on command failure on octeon. We used to
treat failed commands as a success.
- Fix modpost warning when building virtio_dma_buf. Harmless, but the
fix is trivial"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_pci_modern: remove admin queue serialization lock
virtio_pci_modern: use completion instead of busy loop to wait on admin cmd result
virtio_pci_modern: pass cmd as an identification token
virtio_pci_modern: create admin queue of queried size
virtio: create admin queues alongside other virtqueues
virtio_pci: pass vq info as an argument to vp_setup_vq()
virtio: push out code to vp_avq_index()
virtio_pci_modern: treat vp_dev->admin_vq.info.vq pointer as static
virtio_pci: introduce vector allocation fallback for slow path virtqueues
virtio_pci: pass vector policy enum to vp_find_one_vq_msix()
virtio_pci: pass vector policy enum to vp_find_vqs_msix()
virtio_pci: simplify vp_request_msix_vectors() call a bit
virtio_pci: push out single vq find code to vp_find_one_vq_msix()
vdpa/octeon_ep: Fix error code in octep_process_mbox()
virtio: add missing MODULE_DESCRIPTION() macro
|
|
This is the really old legacy kernel profiling code, which has long
since been obviated by "real profiling" (ie 'prof' and company), and
mainly remains as a source of syzbot reports.
There are anecdotal reports that people still use it for boot-time
profiling, but it's unlikely that such use would care about the old NUMA
optimizations in this code from 2004 (commit ad02973d42: "profile: 512x
Altix timer interrupt livelock fix" in the BK import archive at [1])
So in order to head off future syzbot reports, let's try to simplify
this code and get rid of the per-cpu profile buffers that are quite a
large portion of the complexity footprint of this thing (including CPU
hotplug callbacks etc).
It's unlikely anybody will actually notice, or possibly, as Thomas put
it: "Only people who indulge in nostalgia will notice :)".
That said, if it turns out that this code is actually actively used by
somebody, we can always revert this removal. Thus the "attempt" in the
summary line.
[ Note: in a small nod to "the profiling code can cause NUMA problems",
this also removes the "increment the last entry in the profiling array
on any unknown hits" logic. That would account any program counter in
a module to that single counter location, and might exacerbate any
NUMA cacheline bouncing issues ]
Link: https://lore.kernel.org/all/CAHk-=wgs52BxT4Zjmjz8aNvHWKxf5_ThBY4bYL1Y6CTaNL2dTw@mail.gmail.com/
Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git [1]
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Now that we no longer have any C constant expression contexts (ie array
size declarations or static initializers) that use min() or max(), we
can simpify the implementation by not having to worry about the result
staying as a C constant expression.
So now we can unconditionally just use temporary variables of the right
type, and get rid of the excessive expansion that used to come from the
use of
__builtin_choose_expr(__is_constexpr(...), ..
to pick the specialized code for constant expressions.
Another expansion simplification is to pass the temporary variables (in
addition to the original expression) to our __types_ok() macro. That
may superficially look like it complicates the macro, but when we only
want the type of the expression, expanding the temporary variable names
is much simpler and smaller than expanding the potentially complicated
original expression.
As a result, on my machine, doing a
$ time make drivers/staging/media/atomisp/pci/isp/kernels/ynr/ynr_1.0/ia_css_ynr.host.i
goes from
real 0m16.621s
user 0m15.360s
sys 0m1.221s
to
real 0m2.532s
user 0m2.091s
sys 0m0.452s
because the token expansion goes down dramatically.
In particular, the longest line expansion (which was line 71 of that
'ia_css_ynr.host.c' file) shrinks from 23,338kB (yes, 23MB for one
single line) to "just" 1,444kB (now "only" 1.4MB).
And yes, that line is still the line from hell, because it's doing
multiple levels of "min()/max()" expansion thanks to some of them being
hidden inside the uDIGIT_FITTING() macro.
Lorenzo has a nice cleanup patch that makes that driver use inline
functions instead of macros for sDIGIT_FITTING() and uDIGIT_FITTING(),
which will fix that line once and for all, but the 16-fold reduction in
this case does show why we need to simplify these helpers.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This just standardizes the use of MIN() and MAX() macros, with the very
traditional semantics. The goal is to use these for C constant
expressions and for top-level / static initializers, and so be able to
simplify the min()/max() macros.
These macro names were used by various kernel code - they are very
traditional, after all - and all such users have been fixed up, with a
few different approaches:
- trivial duplicated macro definitions have been removed
Note that 'trivial' here means that it's obviously kernel code that
already included all the major kernel headers, and thus gets the new
generic MIN/MAX macros automatically.
- non-trivial duplicated macro definitions are guarded with #ifndef
This is the "yes, they define their own versions, but no, the include
situation is not entirely obvious, and maybe they don't get the
generic version automatically" case.
- strange use case #1
A couple of drivers decided that the way they want to describe their
versioning is with
#define MAJ 1
#define MIN 2
#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN)
which adds zero value and I just did my Alexander the Great
impersonation, and rewrote that pointless Gordian knot as
#define DRV_VERSION "1.2"
instead.
- strange use case #2
A couple of drivers thought that it's a good idea to have a random
'MIN' or 'MAX' define for a value or index into a table, rather than
the traditional macro that takes arguments.
These values were re-written as C enum's instead. The new
function-line macros only expand when followed by an open
parenthesis, and thus don't clash with enum use.
Happily, there weren't really all that many of these cases, and a lot of
users already had the pattern of using '#ifndef' guarding (or in one
case just using '#undef MIN') before defining their own private version
that does the same thing. I left such cases alone.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This simplifies the min_t() and max_t() macros by no longer making them
work in the context of a C constant expression.
That means that you can no longer use them for static initializers or
for array sizes in type definitions, but there were only a couple of
such uses, and all of them were converted (famous last words) to use
MIN_T/MAX_T instead.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
"Core:
- A CXL maturity map has been added to the documentation to detail
the current state of CXL enabling.
It provides the status of the current state of various CXL features
to inform current and future contributors of where things are and
which areas need contribution.
- A notifier handler has been added in order for a newly created CXL
memory region to trigger the abstract distance metrics calculation.
This should bring parity for CXL memory to the same level vs
hotplugged DRAM for NUMA abstract distance calculation. The
abstract distance reflects relative performance used for memory
tiering handling.
- An addition for XOR math has been added to address the CXL DPA to
SPA translation.
CXL address translation did not support address interleave math
with XOR prior to this change.
Fixes:
- Fix to address race condition in the CXL memory hotplug notifier
- Add missing MODULE_DESCRIPTION() for CXL modules
- Fix incorrect vendor debug UUID define
Misc:
- A warning has been added to inform users of an unsupported
configuration when mixing CXL VH and RCH/RCD hierarchies
- The ENXIO error code has been replaced with EBUSY for inject poison
limit reached via debugfs and cxl-test support
- Moving the PCI config read in cxl_dvsec_rr_decode() to avoid
unnecessary PCI config reads
- A refactor to a common struct for DRAM and general media CXL
events"
* tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core/pci: Move reading of control register to immediately before usage
cxl: Remove defunct code calculating host bridge target positions
cxl/region: Verify target positions using the ordered target list
cxl: Restore XOR'd position bits during address translation
cxl/core: Fold cxl_trace_hpa() into cxl_dpa_to_hpa()
cxl/test: Replace ENXIO with EBUSY for inject poison limit reached
cxl/memdev: Replace ENXIO with EBUSY for inject poison limit reached
cxl/acpi: Warn on mixed CXL VH and RCH/RCD Hierarchy
cxl/core: Fix incorrect vendor debug UUID define
Documentation: CXL Maturity Map
cxl/region: Simplify cxl_region_nid()
cxl/region: Support to calculate memory tier abstract distance
cxl/region: Fix a race condition in memory hotplug notifier
cxl: add missing MODULE_DESCRIPTION() macros
cxl/events: Use a common struct for DRAM and General Media events
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fix request without payloads cleanup (Leon)
- Use new protection information format (Francis)
- Improved debug message for lost pci link (Bart)
- Another apst quirk (Wang)
- Use appropriate sysfs api for printing chars (Markus)
- ublk async device deletion fix (Ming)
- drbd kerneldoc fixups (Simon)
- Fix deadlock between sd removal and release (Yang)
* tag 'block-6.11-20240726' of git://git.kernel.dk/linux:
nvme-pci: add missing condition check for existence of mapped data
ublk: fix UBLK_CMD_DEL_DEV_ASYNC handling
block: fix deadlock between sd_remove & sd_release
drbd: Add peer_device to Kernel doc
nvme-core: choose PIF from QPIF if QPIFS supports and PIF is QTYPE
nvme-pci: Fix the instructions for disabling power management
nvme: remove redundant bdev local variable
nvme-fabrics: Use seq_putc() in __nvmf_concat_opt_tokens()
nvme/pci: Add APST quirk for Lenovo N60z laptop
|
|
Pull io_uring fixes from Jens Axboe:
- Fix a syzbot issue for the msg ring cache added in this release. No
ill effects from this one, but it did make KMSAN unhappy (me)
- Sanitize the NAPI timeout handling, by unifying the value handling
into all ktime_t rather than converting back and forth (Pavel)
- Fail NAPI registration for IOPOLL rings, it's not supported (Pavel)
- Fix a theoretical issue with ring polling and cancelations (Pavel)
- Various little cleanups and fixes (Pavel)
* tag 'io_uring-6.11-20240726' of git://git.kernel.dk/linux:
io_uring/napi: pass ktime to io_napi_adjust_timeout
io_uring/napi: use ktime in busy polling
io_uring/msg_ring: fix uninitialized use of target_req->flags
io_uring: align iowq and task request error handling
io_uring: kill REQ_F_CANCEL_SEQ
io_uring: simplify io_uring_cmd return
io_uring: fix io_match_task must_hold
io_uring: don't allow netpolling with SETUP_IOPOLL
io_uring: tighten task exit cancellations
|
|
Pull Rust updates from Miguel Ojeda:
"The highlight is the establishment of a minimum version for the Rust
toolchain, including 'rustc' (and bundled tools) and 'bindgen'.
The initial minimum will be the pinned version we currently have, i.e.
we are just widening the allowed versions. That covers three stable
Rust releases: 1.78.0, 1.79.0, 1.80.0 (getting released tomorrow),
plus beta, plus nightly.
This should already be enough for kernel developers in distributions
that provide recent Rust compiler versions routinely, such as Arch
Linux, Debian Unstable (outside the freeze period), Fedora Linux,
Gentoo Linux (especially the testing channel), Nix (unstable) and
openSUSE Slowroll and Tumbleweed.
In addition, the kernel is now being built-tested by Rust's pre-merge
CI. That is, every change that is attempting to land into the Rust
compiler is tested against the kernel, and it is merged only if it
passes. Similarly, the bindgen tool has agreed to build the kernel in
their CI too.
Thus, with the pre-merge CI in place, both projects hope to avoid
unintentional changes to Rust that break the kernel. This means that,
in general, apart from intentional changes on their side (that we will
need to workaround conditionally on our side), the upcoming Rust
compiler versions should generally work.
In addition, the Rust project has proposed getting the kernel into
stable Rust (at least solving the main blockers) as one of its three
flagship goals for 2024H2 [1].
I would like to thank Niko, Sid, Emilio et al. for their help
promoting the collaboration between Rust and the kernel.
Toolchain and infrastructure:
- Support several Rust toolchain versions.
- Support several bindgen versions.
- Remove 'cargo' requirement and simplify 'rusttest', thanks to
'alloc' having been dropped last cycle.
- Provide proper error reporting for the 'rust-analyzer' target.
'kernel' crate:
- Add 'uaccess' module with a safe userspace pointers abstraction.
- Add 'page' module with a 'struct page' abstraction.
- Support more complex generics in workqueue's 'impl_has_work!'
macro.
'macros' crate:
- Add 'firmware' field support to the 'module!' macro.
- Improve 'module!' macro documentation.
Documentation:
- Provide instructions on what packages should be installed to build
the kernel in some popular Linux distributions.
- Introduce the new kernel.org LLVM+Rust toolchains.
- Explain '#[no_std]'.
And a few other small bits"
Link: https://rust-lang.github.io/rust-project-goals/2024h2/index.html#flagship-goals [1]
* tag 'rust-6.11' of https://github.com/Rust-for-Linux/linux: (26 commits)
docs: rust: quick-start: add section on Linux distributions
rust: warn about `bindgen` versions 0.66.0 and 0.66.1
rust: start supporting several `bindgen` versions
rust: work around `bindgen` 0.69.0 issue
rust: avoid assuming a particular `bindgen` build
rust: start supporting several compiler versions
rust: simplify Clippy warning flags set
rust: relax most deny-level lints to warnings
rust: allow `dead_code` for never constructed bindings
rust: init: simplify from `map_err` to `inspect_err`
rust: macros: indent list item in `paste!`'s docs
rust: add abstraction for `struct page`
rust: uaccess: add typed accessors for userspace pointers
uaccess: always export _copy_[from|to]_user with CONFIG_RUST
rust: uaccess: add userspace pointers
kbuild: rust-analyzer: improve comment documentation
kbuild: rust-analyzer: better error handling
docs: rust: no_std is used
rust: alloc: add __GFP_HIGHMEM flag
rust: alloc: fix typo in docs for GFP_NOWAIT
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
"Most of this is a treewide change to of_property_for_each_u32() which
was small enough to do in one go before rc1 and avoids the need to
create of_property_for_each_u32_some_new_name().
- Treewide conversion of of_property_for_each_u32() to drop internal
arguments making struct property opaque
- Add binding for Amlogic A4 SoC watchdog
- Fix constraints for AD7192 'single-channel' property"
* tag 'devicetree-fixes-for-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: iio: adc: ad7192: Fix 'single-channel' constraints
of: remove internal arguments from of_property_for_each_u32()
dt-bindings: watchdog: add support for Amlogic A4 SoCs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"The recent integration of compiler collections introduced the
technology to check flexible array length at runtime by providing
proper annotations. In v6.10 kernel, a patch was merged into firewire
subsystem to utilize it, however the annotation was inadequate.
There is also the related change for the flexible array in sound
subsystem, but it causes a regression where the data in the payload of
isochronous packet is incorrect for some devices. These bugs are now
fixed"
* tag 'firewire-fixes-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
ALSA: firewire-lib: fix wrong value as length of header for CIP_NO_HEADER case
Revert "firewire: Annotate struct fw_iso_packet with __counted_by()"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"This cycle, there are new features for the Designware controller and
fixes for the other IPs:
- dw: optional apb clock and power management support, IBI handling
fixes
- mipi-i3c-hci: IBI handling fixes
- svc: a few fixes"
* tag 'i3c/for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
dt-bindings: i3c: add header for generic I3C flags
i3c: master: svc: Fix error code in svc_i3c_master_do_daa_locked()
i3c: master: Enhance i3c_bus_type visibility for device searching & event monitoring
i3c: dw: Add power management support
i3c: dw: Add some functions for reusability
i3c: dw: Save timing registers and other values
i3c: master: svc: Improve DAA STOP handle code logic
i3c: dw: Add optional apb clock
i3c: dw: Use new *_enabled clk API
dt-bindings: i3c: dw: Add apb clock binding
i3c: master: svc: Convert comma to semicolon
i3c: mipi-i3c-hci: Round IBI data chunk size to HW supported value
i3c: mipi-i3c-hci: Error out instead on BUG_ON() in IBI DMA setup
i3c: mipi-i3c-hci: Set IBI Status and Data Ring base addresses
i3c: mipi-i3c-hci: Switch to lower_32_bits()/upper_32_bits() helpers
i3c: dw: Remove ibi_capable property
i3c: dw: Fix IBI intr programming
i3c: dw: Fix clearing queue thld
i3c: mipi-i3c-hci: Fix number of DAT/DCT entries for HCI versions < 1.1
i3c: master: svc: resend target address when get NACK
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"11 hotfixes, 7 of which are cc:stable. 7 are MM, 4 are other"
* tag 'mm-hotfixes-stable-2024-07-26-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: handle inconsistent state in nilfs_btnode_create_block()
selftests/mm: skip test for non-LPA2 and non-LVA systems
mm/page_alloc: fix pcp->count race between drain_pages_zone() vs __rmqueue_pcplist()
mm: memcg: add cacheline padding after lruvec in mem_cgroup_per_node
alloc_tag: outline and export free_reserved_page()
decompress_bunzip2: fix rare decompression failure
mm/huge_memory: avoid PMD-size page cache if needed
mm: huge_memory: use !CONFIG_64BIT to relax huge page alignment on 32 bit machines
mm: fix old/young bit handling in the faulting path
dt-bindings: arm: update James Clark's email address
MAINTAINERS: mailmap: update James Clark's email address
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer migration updates from Thomas Gleixner:
"Fixes and minor updates for the timer migration code:
- Stop testing the group->parent pointer as it is not guaranteed to
be stable over a chain of operations by design.
This includes a warning which would be nice to have but it produces
false positives due to the racy nature of the check.
- Plug a race between CPUs going in and out of idle and a CPU hotplug
operation. The latter can create and connect a new hierarchy level
which is missed in the concurrent updates of CPUs which go into
idle. As a result the events of such a CPU might not be processed
and timers go stale.
Cure it by splitting the hotplug operation into a prepare and
online callback. The prepare callback is guaranteed to run on an
online and therefore active CPU. This CPU updates the hierarchy and
being online ensures that there is always at least one migrator
active which handles the modified hierarchy correctly when going
idle. The online callback which runs on the incoming CPU then just
marks the CPU active and brings it into operation.
- Improve tracing and polish the code further so it is more obvious
what's going on"
* tag 'timers-urgent-2024-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Fix grammar in comment
timers/migration: Spare write when nothing changed
timers/migration: Rename childmask by groupmask to make naming more obvious
timers/migration: Read childmask and parent pointer in a single place
timers/migration: Use a single struct for hierarchy walk data
timers/migration: Improve tracing
timers/migration: Move hierarchy setup into cpuhotplug prepare callback
timers/migration: Do not rely always on group->parent
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for NUMA (via SRAT and SLIT), console output (via SPCR), and
cache info (via PPTT) on ACPI-based systems.
- The trap entry/exit code no longer breaks the return address stack
predictor on many systems, which results in an improvement to trap
latency.
- Support for HAVE_ARCH_STACKLEAK.
- The sv39 linear map has been extended to support 128GiB mappings.
- The frequency of the mtime CSR is now visible via hwprobe.
* tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits)
RISC-V: Provide the frequency of time CSR via hwprobe
riscv: Extend sv39 linear mapping max size to 128G
riscv: enable HAVE_ARCH_STACKLEAK
riscv: signal: Remove unlikely() from WARN_ON() condition
riscv: Improve exception and system call latency
RISC-V: Select ACPI PPTT drivers
riscv: cacheinfo: initialize cacheinfo's level and type from ACPI PPTT
riscv: cacheinfo: remove the useless input parameter (node) of ci_leaf_init()
RISC-V: ACPI: Enable SPCR table for console output on RISC-V
riscv: boot: remove duplicated targets line
trace: riscv: Remove deprecated kprobe on ftrace support
riscv: cpufeature: Extract common elements from extension checking
riscv: Introduce vendor variants of extension helpers
riscv: Add vendor extensions to /proc/cpuinfo
riscv: Extend cpufeature.c to detect vendor extensions
RISC-V: run savedefconfig for defconfig
RISC-V: hwprobe: sort EXT_KEY()s in hwprobe_isa_ext0() alphabetically
ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init
ACPI: NUMA: change the ACPI_NUMA to a hidden option
ACPI: NUMA: Add handler for SRAT RINTC affinity structure
...
|
|
This reverts commit d3155742db89df3b3c96da383c400e6ff4d23c25.
The header_length field is byte unit, thus it can not express the number of
elements in header field. It seems that the argument for counted_by
attribute can have no arithmetic expression, therefore this commit just
reverts the issued commit.
Suggested-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240725161648.130404-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
The minmax infrastructure is overkill for simple constants, and can
cause huge expansions because those simple constants are then used by
other things.
For example, 'pageblock_order' is a core VM constant, but because it was
implemented using 'min_t()' and all the type-checking that involves, it
actually expanded to something like 2.5kB of preprocessor noise.
And when that simple constant was then used inside other expansions:
#define pageblock_nr_pages (1UL << pageblock_order)
#define pageblock_start_pfn(pfn) ALIGN_DOWN((pfn), pageblock_nr_pages)
and we then use that inside a 'max()' macro:
case ISOLATE_SUCCESS:
update_cached = false;
last_migrated_pfn = max(cc->zone->zone_start_pfn,
pageblock_start_pfn(cc->migrate_pfn - 1));
the end result was that one statement expanding to 253kB in size.
There are probably other cases of this, but this one case certainly
stood out.
I've added 'MIN_T()' and 'MAX_T()' macros for this kind of "core simple
constant with specific type" use. These macros skip the type checking,
and as such need to be very sparingly used only for obvious cases that
have active issues like this.
Reported-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/all/36aa2cad-1db1-4abf-8dd2-fb20484aabc3@lucifer.local/
Cc: David Laight <David.Laight@aculab.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Oliver Sand reported a performance regression caused by commit
98c9daf5ae6b ("mm: memcg: guard memcg1-specific members of struct
mem_cgroup_per_node"), which puts some fields of the mem_cgroup_per_node
structure under the CONFIG_MEMCG_V1 config option. Apparently it causes a
false cache sharing between lruvec and lru_zone_size members of the
structure. Fix it by adding an explicit padding after the lruvec member.
Even though the padding is not required with CONFIG_MEMCG_V1 set, it seems
like the introduced memory overhead is not significant enough to warrant
another divergence in the mem_cgroup_per_node layout, so the padding is
added unconditionally.
Link: https://lkml.kernel.org/r/20240723171244.747521-1-roman.gushchin@linux.dev
Fixes: 98c9daf5ae6b ("mm: memcg: guard memcg1-specific members of struct mem_cgroup_per_node")
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202407121335.31a10cb6-oliver.sang@intel.com
Tested-by: Oliver Sang <oliver.sang@intel.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Outline and export free_reserved_page() because modules use it and it in
turn uses page_ext_{get|put} which should not be exported. The same
result could be obtained by outlining {get|put}_page_tag_ref() but that
would have higher performance impact as these functions are used in more
performance critical paths.
Link: https://lkml.kernel.org/r/20240717212844.2749975-1-surenb@google.com
Fixes: dcfe378c81f7 ("lib: introduce support for page allocation tagging")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407080044.DWMC9N9I-lkp@intel.com/
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Sourav Panda <souravpanda@google.com>
Cc: <stable@vger.kernel.org> [6.10]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
xarray can't support arbitrary page cache size. the largest and supported
page cache size is defined as MAX_PAGECACHE_ORDER by commit 099d90642a71
("mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarray"). However,
it's possible to have 512MB page cache in the huge memory's collapsing
path on ARM64 system whose base page size is 64KB. 512MB page cache is
breaking the limitation and a warning is raised when the xarray entry is
split as shown in the following example.
[root@dhcp-10-26-1-207 ~]# cat /proc/1/smaps | grep KernelPageSize
KernelPageSize: 64 kB
[root@dhcp-10-26-1-207 ~]# cat /tmp/test.c
:
int main(int argc, char **argv)
{
const char *filename = TEST_XFS_FILENAME;
int fd = 0;
void *buf = (void *)-1, *p;
int pgsize = getpagesize();
int ret = 0;
if (pgsize != 0x10000) {
fprintf(stdout, "System with 64KB base page size is required!\n");
return -EPERM;
}
system("echo 0 > /sys/devices/virtual/bdi/253:0/read_ahead_kb");
system("echo 1 > /proc/sys/vm/drop_caches");
/* Open the xfs file */
fd = open(filename, O_RDONLY);
assert(fd > 0);
/* Create VMA */
buf = mmap(NULL, TEST_MEM_SIZE, PROT_READ, MAP_SHARED, fd, 0);
assert(buf != (void *)-1);
fprintf(stdout, "mapped buffer at 0x%p\n", buf);
/* Populate VMA */
ret = madvise(buf, TEST_MEM_SIZE, MADV_NOHUGEPAGE);
assert(ret == 0);
ret = madvise(buf, TEST_MEM_SIZE, MADV_POPULATE_READ);
assert(ret == 0);
/* Collapse VMA */
ret = madvise(buf, TEST_MEM_SIZE, MADV_HUGEPAGE);
assert(ret == 0);
ret = madvise(buf, TEST_MEM_SIZE, MADV_COLLAPSE);
if (ret) {
fprintf(stdout, "Error %d to madvise(MADV_COLLAPSE)\n", errno);
goto out;
}
/* Split xarray entry. Write permission is needed */
munmap(buf, TEST_MEM_SIZE);
buf = (void *)-1;
close(fd);
fd = open(filename, O_RDWR);
assert(fd > 0);
fallocate(fd, FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE,
TEST_MEM_SIZE - pgsize, pgsize);
out:
if (buf != (void *)-1)
munmap(buf, TEST_MEM_SIZE);
if (fd > 0)
close(fd);
return ret;
}
[root@dhcp-10-26-1-207 ~]# gcc /tmp/test.c -o /tmp/test
[root@dhcp-10-26-1-207 ~]# /tmp/test
------------[ cut here ]------------
WARNING: CPU: 25 PID: 7560 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128
Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \
nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \
nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \
ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm fuse \
xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 virtio_net \
sha1_ce net_failover virtio_blk virtio_console failover dimlib virtio_mmio
CPU: 25 PID: 7560 Comm: test Kdump: loaded Not tainted 6.10.0-rc7-gavin+ #9
Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024
pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : xas_split_alloc+0xf8/0x128
lr : split_huge_page_to_list_to_order+0x1c4/0x780
sp : ffff8000ac32f660
x29: ffff8000ac32f660 x28: ffff0000e0969eb0 x27: ffff8000ac32f6c0
x26: 0000000000000c40 x25: ffff0000e0969eb0 x24: 000000000000000d
x23: ffff8000ac32f6c0 x22: ffffffdfc0700000 x21: 0000000000000000
x20: 0000000000000000 x19: ffffffdfc0700000 x18: 0000000000000000
x17: 0000000000000000 x16: ffffd5f3708ffc70 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: ffffffffffffffc0 x10: 0000000000000040 x9 : ffffd5f3708e692c
x8 : 0000000000000003 x7 : 0000000000000000 x6 : ffff0000e0969eb8
x5 : ffffd5f37289e378 x4 : 0000000000000000 x3 : 0000000000000c40
x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000
Call trace:
xas_split_alloc+0xf8/0x128
split_huge_page_to_list_to_order+0x1c4/0x780
truncate_inode_partial_folio+0xdc/0x160
truncate_inode_pages_range+0x1b4/0x4a8
truncate_pagecache_range+0x84/0xa0
xfs_flush_unmap_range+0x70/0x90 [xfs]
xfs_file_fallocate+0xfc/0x4d8 [xfs]
vfs_fallocate+0x124/0x2f0
ksys_fallocate+0x4c/0xa0
__arm64_sys_fallocate+0x24/0x38
invoke_syscall.constprop.0+0x7c/0xd8
do_el0_svc+0xb4/0xd0
el0_svc+0x44/0x1d8
el0t_64_sync_handler+0x134/0x150
el0t_64_sync+0x17c/0x180
Fix it by correcting the supported page cache orders, different sets for
DAX and other files. With it corrected, 512MB page cache becomes
disallowed on all non-DAX files on ARM64 system where the base page size
is 64KB. After this patch is applied, the test program fails with error
-EINVAL returned from __thp_vma_allowable_orders() and the madvise()
system call to collapse the page caches.
Link: https://lkml.kernel.org/r/20240715000423.316491-1-gshan@redhat.com
Fixes: 6b24ca4a1a8d ("mm: Use multi-index entries in the page cache")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: <stable@vger.kernel.org> [5.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This check is currently performed by sev_gmem_post_populate(), but it
applies to all callers of kvm_gmem_populate(): the point of the function
is that the memory is being encrypted and some work has to be done
on all the gfns in order to encrypt them.
Therefore, check the KVM_MEMORY_ATTRIBUTE_PRIVATE attribute prior
to invoking the callback, and stop the operation if a shared page
is encountered. Because CONFIG_KVM_PRIVATE_MEM in principle does
not require attributes, this makes kvm_gmem_populate() depend on
CONFIG_KVM_GENERIC_PRIVATE_MEM (which does require them).
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
While currently there is no other attribute than KVM_MEMORY_ATTRIBUTE_PRIVATE,
KVM code such as kvm_mem_is_private() is written to expect their existence.
Allow using kvm_range_has_memory_attributes() as a multi-page version of
kvm_mem_is_private(), without it breaking later when more attributes are
introduced.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It is enough to return 0 if a guest need not do any preparation.
This is in fact how sev_gmem_prepare() works for non-SNP guests,
and it extends naturally to Intel hosts: the x86 callback for
gmem_prepare is optional and returns 0 if not defined.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add "ARCH" to the symbols; shortly, the "prepare" phase will include both
the arch-independent step to clear out contents left in the page by the
host, and the arch-dependent step enabled by CONFIG_HAVE_KVM_GMEM_PREPARE.
For consistency do the same for CONFIG_HAVE_KVM_GMEM_INVALIDATE as well.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull bitmap updates from Yury Norov:
"Random fixes"
* tag 'bitmap-6.11-rc1' of https://github.com:/norov/linux:
riscv: Remove unnecessary int cast in variable_fls()
radix tree test suite: put definition of bitmap_clear() into lib/bitmap.c
bitops: Add a comment explaining the double underscore macros
lib: bitmap: add missing MODULE_DESCRIPTION() macros
cpumask: introduce assign_cpu() macro
|
|
It's more natural to use ktime/ns instead of keeping around usec,
especially since we're comparing it against user provided timers,
so convert napi busy poll internal handling to ktime. It's also nicer
since the type (ktime_t vs unsigned long) now tells the unit of measure.
Keep everything as ktime, which we convert to/from micro seconds for
IORING_[UN]REGISTER_NAPI. The net/ busy polling works seems to work with
usec, however it's not real usec as shift by 10 is used to get it from
nsecs, see busy_loop_current_time(), so it's easy to get truncated nsec
back and we get back better precision.
Note, we can further improve it later by removing the truncation and
maybe convincing net/ to use ktime/ns instead.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/95e7ec8d095069a3ed5d40a4bc6f8b586698bc7e.1722003776.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.11
- Fix request without payloads cleanup (Leon)
- Use new protection information format (Francis)
- Improved debug message for lost pci link (Bart)
- Another apst quirk (Wang)
- Use appropriate sysfs api for printing chars (Markus)"
* tag 'nvme-6.11-2024-07-26' of git://git.infradead.org/nvme:
nvme-pci: add missing condition check for existence of mapped data
nvme-core: choose PIF from QPIF if QPIFS supports and PIF is QTYPE
nvme-pci: Fix the instructions for disabling power management
nvme: remove redundant bdev local variable
nvme-fabrics: Use seq_putc() in __nvmf_concat_opt_tokens()
nvme/pci: Add APST quirk for Lenovo N60z laptop
|
|
monitoring
Improve the visibility of i3c_bus_type to facilitate searching for
i3c devices attached to the i3c bus. Enable other drivers to use
bus_register_notifier to monitor i3c bus device events.
Signed-off-by: Bhoomik Gupta <bhoomik.gupta@nxp.com>
Link: https://lore.kernel.org/r/20240708053835.3003986-1-bhoomik.gupta@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- trivial printk changes
The bigger "real" printk work is still being discussed.
* tag 'printk-for-6.11-trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
vsprintf: add missing MODULE_DESCRIPTION() macro
printk: Rename console_replay_all() and update context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl constification from Joel Granados:
"Treewide constification of the ctl_table argument of proc_handlers
using a coccinelle script and some manual code formatting fixups.
This is a prerequisite to moving the static ctl_table structs into
read-only data section which will ensure that proc_handler function
pointers cannot be modified"
* tag 'constfy-sysctl-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: treewide: constify the ctl_table argument of proc_handlers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
|
|
The of_property_for_each_u32() macro needs five parameters, two of which
are primarily meant as internal variables for the macro itself (in the
for() clause). Yet these two parameters are used by a few drivers, and this
can be considered misuse or at least bad practice.
Now that the kernel uses C11 to build, these two parameters can be avoided
by declaring them internally, thus changing this pattern:
struct property *prop;
const __be32 *p;
u32 val;
of_property_for_each_u32(np, "xyz", prop, p, val) { ... }
to this:
u32 val;
of_property_for_each_u32(np, "xyz", val) { ... }
However two variables cannot be declared in the for clause even with C11,
so declare one struct that contain the two variables we actually need. As
the variables inside this struct are not meant to be used by users of this
macro, give the struct instance the noticeable name "_it" so it is visible
during code reviews, helping to avoid new code to use it directly.
Most usages are trivially converted as they do not use those two
parameters, as expected. The non-trivial cases are:
- drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway
- drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the
checks had to be replicated in a different way, making code more verbose
and somewhat uglier, but I refrained from a full rework to keep as much
of the original code untouched having no hardware to test my changes
All the changes have been build tested. The few for which I have the
hardware have been runtime-tested too.
Reviewed-by: Andre Przywara <andre.przywara@arm.com> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # drivers/gpio/gpio-brcmstb.c
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # drivers/irqchip/irq-atmel-aic-common.c
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # drivers/iio/adc/ti_am335x_adc.c
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> # drivers/pwm/pwm-samsung.c
Acked-by: Richard Leitner <richard.leitner@linux.dev> # drivers/usb/misc/usb251xb.c
Acked-by: Mark Brown <broonie@kernel.org> # sound/soc/codecs/arizona.c
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> # sound/soc/codecs/arizona.c
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # arch/powerpc/sysdev/xive/spapr.c
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New Support
- Samsung Exynos gs101 drd combo phy
- Qualcomm SC8180x USB uniphy, IPQ9574 QMP PCIe phy
- Airoha EN7581 PCIe phy
- Freescale i.MX8Q HSIO SerDes phy
- Starfive jh7110 dphy tx
Updates:
- Resume support for j721e-wiz driver
- Updates to Exynos usbdrd driver
- Support for optional power domains in g12a usb2-phy driver
- Debugfs support and updates to zynqmp driver"
* tag 'phy-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (56 commits)
phy: airoha: Add dtime and Rx AEQ IO registers
dt-bindings: phy: airoha: Add dtime and Rx AEQ IO registers
dt-bindings: phy: rockchip-emmc-phy: Convert to dtschema
dt-bindings: phy: qcom,qmp-usb: fix spelling error
phy: exynos5-usbdrd: support Exynos USBDRD 3.1 combo phy (HS & SS)
phy: exynos5-usbdrd: convert Vbus supplies to regulator_bulk
phy: exynos5-usbdrd: convert (phy) register access clock to clk_bulk
phy: exynos5-usbdrd: convert core clocks to clk_bulk
phy: exynos5-usbdrd: support isolating HS and SS ports independently
dt-bindings: phy: samsung,usb3-drd-phy: add gs101 compatible
phy: core: Fix documentation of of_phy_get
phy: starfive: Correct the dphy configure process
phy: zynqmp: Add debugfs support
phy: zynqmp: Take the phy mutex in xlate
phy: zynqmp: Only wait for PLL lock "primary" instances
phy: zynqmp: Store instance instead of type
phy: zynqmp: Enable reference clock correctly
phy: cadence-torrent: Check return value on register read
phy: Fix the cacography in phy-exynos5250-usb2.c
phy: phy-rockchip-samsung-hdptx: Select CONFIG_MFD_SYSCON
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Simplification across subsystem using cleanup.h
- Support for debugfs to read/write commands
- Few Intel and Qualcomm driver updates
* tag 'soundwire-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: debugfs: simplify with cleanup.h
soundwire: cadence: simplify with cleanup.h
soundwire: intel_ace2x: simplify with cleanup.h
soundwire: intel_ace2x: simplify return path in hw_params
soundwire: intel: simplify with cleanup.h
soundwire: intel: simplify return path in hw_params
soundwire: amd_init: simplify with cleanup.h
soundwire: amd: simplify with cleanup.h
soundwire: amd: simplify return path in hw_params
soundwire: intel_auxdevice: start the bus at default frequency
soundwire: intel_auxdevice: add cs42l43 codec to wake_capable_list
drivers:soundwire: qcom: cleanup port maask calculations
soundwire: bus: simplify by using local slave->prop
soundwire: generic_bandwidth_allocation: change port_bo parameter to pointer
soundwire: Intel: clarify Copyright information
soundwire: intel_ace2.x: add AC timing extensions for PantherLake
soundwire: bus: add stream refcount
soundwire: debugfs: add interface to read/write commands
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support:
- New dmaengine_prep_peripheral_dma_vec() to support transfers using
dma vectors and documentation and user in AXI dma
- STMicro STM32 DMA3 support and new capabilities of cyclic dma
Updates:
- Yaml conversion for Freescale imx dma and qdma bindings,
sprd sc9860 dma binding
- Altera msgdma updates for descriptor management"
* tag 'dmaengine-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (35 commits)
dt-bindings: fsl-qdma: fix interrupts 'if' check logic
dt-bindings: dma: sprd,sc9860-dma: convert to YAML
dmaengine: fsl-dpaa2-qdma: add missing MODULE_DESCRIPTION() macro
dmaengine: ti: add missing MODULE_DESCRIPTION() macros
dmaengine: ti: cppi41: add missing MODULE_DESCRIPTION() macro
dmaengine: virt-dma: add missing MODULE_DESCRIPTION() macro
dmaengine: ti: k3-udma: Fix BCHAN count with UHC and HC channels
dmaengine: sh: rz-dmac: Fix lockdep assert warning
dmaengine: qcom: gpi: clean up the IRQ disable/enable in gpi_reset_chan()
dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM
dmaengine: qcom: gpi: remove unused struct 'reg_info'
dmaengine: moxart-dma: remove unused struct 'moxart_filter_data'
dt-bindings: fsl-qdma: Convert to yaml format
dmaengine: fsl-edma: remove redundant "idle" field from fsl_chan
dmaengine: fsl-edma: request per-channel IRQ only when channel is allocated
dmaengine: stm32-dma3: defer channel registration to specify channel name
dmaengine: add channel device name to channel registration
dmaengine: stm32-dma3: improve residue granularity
dmaengine: stm32-dma3: add device_pause and device_resume ops
dmaengine: stm32-dma3: add DMA_MEMCPY capability
...
|
|
const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.
This patch has been generated by the following coccinelle script:
```
virtual patch
@r1@
identifier ctl, write, buffer, lenp, ppos;
identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos);
@r2@
identifier func, ctl, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos)
{ ... }
@r3@
identifier func;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int , void *, size_t *, loff_t *);
@r4@
identifier func, ctl;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int , void *, size_t *, loff_t *);
@r5@
identifier func, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int write, void *buffer, size_t *lenp, loff_t *ppos);
```
* Code formatting was adjusted in xfs_sysctl.c to comply with code
conventions. The xfs_stats_clear_proc_handler,
xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
adjusted.
* The ctl_table argument in proc_watchdog_common was const qualified.
This is called from a proc_handler itself and is calling back into
another proc_handler, making it necessary to change it as part of the
proc_handler migration.
Co-developed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Co-developed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"This adds getrandom() support to the vDSO.
First, it adds a new kind of mapping to mmap(2), MAP_DROPPABLE, which
lets the kernel zero out pages anytime under memory pressure, which
enables allocating memory that never gets swapped to disk but also
doesn't count as being mlocked.
Then, the vDSO implementation of getrandom() is introduced in a
generic manner and hooked into random.c.
Next, this is implemented on x86. (Also, though it's not ready for
this pull, somebody has begun an arm64 implementation already)
Finally, two vDSO selftests are added.
There are also two housekeeping cleanup commits"
* tag 'random-6.11-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
MAINTAINERS: add random.h headers to RNG subsection
random: note that RNDGETPOOL was removed in 2.6.9-rc2
selftests/vDSO: add tests for vgetrandom
x86: vdso: Wire up getrandom() vDSO implementation
random: introduce generic vDSO getrandom() implementation
mm: add MAP_DROPPABLE for designating always lazily freeable mappings
|
|
We removed the reliance on the flag by the cancellation path and now
it's unused.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e57afe566bbe4fefeb44daffb08900f2a4756577.1721819383.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"A pretty small update including mostly minor bug fixes in zoned
storage along with the large section support.
Enhancements:
- add support for FS_IOC_GETFSSYSFSPATH
- enable atgc dynamically if conditions are met
- use new ioprio Macro to get ckpt thread ioprio level
- remove unreachable lazytime mount option parsing
Bug fixes:
- fix null reference error when checking end of zone
- fix start segno of large section
- fix to cover read extent cache access with lock
- don't dirty inode for readonly filesystem
- allocate a new section if curseg is not the first seg in its zone
- only fragment segment in the same section
- truncate preallocated blocks in f2fs_file_open()
- fix to avoid use SSR allocate when do defragment
- fix to force buffered IO on inline_data inode
And some minor code clean-ups and sanity checks"
* tag 'f2fs-for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (26 commits)
f2fs: clean up addrs_per_{inode,block}()
f2fs: clean up F2FS_I()
f2fs: use meta inode for GC of COW file
f2fs: use meta inode for GC of atomic file
f2fs: only fragment segment in the same section
f2fs: fix to update user block counts in block_operations()
f2fs: remove unreachable lazytime mount option parsing
f2fs: fix null reference error when checking end of zone
f2fs: fix start segno of large section
f2fs: remove redundant sanity check in sanity_check_inode()
f2fs: assign CURSEG_ALL_DATA_ATGC if blkaddr is valid
f2fs: fix to use mnt_{want,drop}_write_file replace file_{start,end}_wrtie
f2fs: clean up set REQ_RAHEAD given rac
f2fs: enable atgc dynamically if conditions are met
f2fs: fix to truncate preallocated blocks in f2fs_file_open()
f2fs: fix to cover read extent cache access with lock
f2fs: fix return value of f2fs_convert_inline_inode()
f2fs: use new ioprio Macro to get ckpt thread ioprio level
f2fs: fix to don't dirty inode for readonly filesystem
f2fs: fix to avoid use SSR allocate when do defragment
...
|
|
Pull jfs updates from David Kleikamp:
"Folio conversion from Matthew Wilcox and a few various fixes"
* tag 'jfs-6.11' of github.com:kleikamp/linux-shaggy:
jfs: don't walk off the end of ealist
jfs: Fix shift-out-of-bounds in dbDiscardAG
jfs: Fix array-index-out-of-bounds in diFree
jfs: fix null ptr deref in dtInsertEntry
jfs: Remove use of folio error flag
fs: Remove i_blocks_per_page
jfs: Change metapage->page to metapage->folio
jfs: Convert force_metapage to use a folio
jfs: Convert inc_io to take a folio
jfs: Convert page_to_mp to folio_to_mp
jfs; Convert __invalidate_metapages to use a folio
jfs: Convert dec_io to take a folio
jfs: Convert drop_metapage and remove_metapage to take a folio
jfs; Convert release_metapage to use a folio
jfs: Convert insert_metapage() to take a folio
jfs: Convert __get_metapage to use a folio
jfs: Convert metapage_writepage to metapage_write_folio
jfs: Convert metapage_read_folio to use folio APIs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- The maximum amount of DDR memory used by the Mediatek MT8188/MT8195
SCP is increased to handle new use cases. Handling of optional L1TCM
memory is made actually optional.
- An optimization is introduced to only clear the unused portion of IPI
shared buffers, rather than the entire buffer before writing the
message.
- Detection for IPC-only mode in the TI K3 DSP remoteproc driver is
corrected. The loglevel of a debug print in the same is lowered from
error.
- Support for attaching to an running remote processor is added to the
Xilinx R5F.
- An in-kernel implementation of the Qualcomm "protected domain mapper"
(aka service registry) service is introduced, to remove the
dependency on a userspace implementation to detect when the battery
monitor and USB Type-C port manager becomes available. This is then
integrated with the Qualcomm remoteproc driver.
- The Qualcomm PAS remoteproc driver gains support for attempting to
bust hwspinlocks held by the remote processor when it
crashed/stopped.
- The TI OMAP remoteproc driver is transitioned to use devres helpers
for various forms of allocations.
- Parsing of memory-regions in the i.MX remoteproc driver is improved
to avoid a NULL pointer dereference if the phandle reference is
empty. of_node reference counting is corrected in the same.
* tag 'rproc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: mediatek: Increase MT8188/MT8195 SCP core0 DRAM size
remoteproc: k3-dsp: Fix log levels where appropriate
remoteproc: xlnx: Add attach detach support
remoteproc: qcom: select AUXILIARY_BUS
remoteproc: k3-r5: Fix IPC-only mode detection
remoteproc: mediatek: Don't attempt to remap l1tcm memory if missing
remoteproc: qcom: enable in-kernel PD mapper
dt-bindings: remoteproc: imx_rproc: Add minItems for power-domain
remoteproc: imx_rproc: Fix refcount mistake in imx_rproc_addr_init
remoteproc: omap: Use devm_rproc_add() helper
remoteproc: omap: Use devm action to release reserved memory
remoteproc: omap: Use devm_rproc_alloc() helper
remoteproc: imx_rproc: Skip over memory region when node value is NULL
dt-bindings: remoteproc: k3-dsp: Correct optional sram properties for AM62A SoCs
remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop
soc: qcom: smem: Add qcom_smem_bust_hwspin_lock_by_host()
remoteproc: mediatek: Zero out only remaining bytes of IPI buffer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull hwspinlock updates from Bjorn Andersson:
"This introduces a mechanism in the hardware spinlock framework, and
the Qualcomm TCSR mutex driver, for allowing clients to bust locks
held by a remote processor in the event that this enters a faulty
state while holding the shared lock"
* tag 'hwlock-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
hwspinlock: qcom: implement bust operation
hwspinlock: Introduce hwspin_lock_bust()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module update from Luis Chamberlain:
"This is a super boring development cycle this time around for modules,
there is only one patch in this pull request.
The patch deals with a corner case set of dependencies which is not
resolved today to ensure users get the module they need on initramfs.
Currently only one module is known to exist which needs this, however
this can grow to capture other corner cases likely escaped and not
reported before. The kernel change is just a section update, the real
work is done and merged already on upstream kmod.
This has been on linux-next for 3 weeks now"
* tag 'modules-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: create weak dependecies
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
"The I2C core has two header documentation updates as the dependecies
are in now.
The I2C host drivers add some patches which nearly fell through the
cracks:
- Added descriptions in the DTS for the Qualcomm SM8650 and SM8550
Camera Control Interface (CCI).
- Added support for the "settle-time-us" property, which allows the
gpio-mux device to switch from one bus to another with a
configurable delay. The time can be set in the DTS. The latest
change also includes file sorting.
- Fixed slot numbering in the SMBus framework to prevent failures
when more than 8 slots are occupied. It now enforces a a maximum of
8 slots to be used. This ensures that the Intel PIIX4 device can
register the SPDs correctly without failure, even if other slots
are populated but not used"
* tag 'i2c-for-6.11-rc1-second-batch' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: header: improve kdoc for i2c_algorithm
i2c: header: remove unneeded stuff regarding i2c_algorithm
i2c: piix4: Register SPDs
i2c: smbus: remove i801 assumptions from SPD probing
i2c: mux: gpio: Add support for the 'settle-time-us' property
i2c: mux: gpio: Re-order #include to match alphabetic order
dt-bindings: i2c: mux-gpio: Add 'settle-time-us' property
dt-bindings: i2c: qcom-cci: Document sm8650 compatible
dt-bindings: i2c: qcom-cci: Document sm8550 compatible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- new charging_orange_full_green RGB LED trigger
- simplify and cleanup power-supply LED trigger code
- expose power information via hwmon compatibility layer
New hardware support:
- enable battery support for Qualcomm Snapdragon X Elite
- new battery driver for Maxim MAX17201/MAX17205
- new battery driver for Lenovo Yoga C630 laptop (custom EC)
Cleanups:
- cleanup 'struct i2c_device_id' initializations
- misc small battery driver cleanups and fixes"
* tag 'for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: sysfs: use power_supply_property_is_writeable()
power: supply: qcom_battmgr: Enable battery support on x1e80100
power: supply: add support for MAX1720x standalone fuel gauge
dt-bindings: power: supply: add support for MAX17201/MAX17205 fuel gauge
power: reset: piix4: add missing MODULE_DESCRIPTION() macro
power: supply: samsung-sdi-battery: Constify struct power_supply_maintenance_charge_table
power: supply: samsung-sdi-battery: Constify struct power_supply_vbat_ri_table
power: supply: lenovo_yoga_c630_battery: add Lenovo C630 driver
power: supply: ingenic: Fix some error handling paths in ingenic_battery_get_property()
power: supply: ab8500: Clean some error messages
power: supply: ab8500: Use iio_read_channel_processed_scale()
power: supply: ab8500: Fix error handling when calling iio_read_channel_processed()
power: supply: hwmon: Add support for power sensors
power: supply: ab8500: remove unused struct 'inst_curr_result_list'
power: supply: bd99954: remove unused struct 'battery_data'
power: supply: leds: Add activate() callback to triggers
power: supply: leds: Share trig pointer for online and charging_full
power: supply: leds: Add power_supply_[un]register_led_trigger()
power: supply: Drop explicit initialization of struct i2c_device_id::driver_data to 0
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI interrupt updates from Thomas Gleixner:
"Switch ARM/ARM64 over to the modern per device MSI domains.
This simplifies the handling of platform MSI and wire to MSI
controllers and removes about 500 lines of legacy code.
Aside of that it paves the way for ARM/ARM64 to utilize the dynamic
allocation of PCI/MSI interrupts and to support the upcoming non
standard IMS (Interrupt Message Store) mechanism on PCIe devices"
* tag 'irq-msi-2024-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
irqchip/gic-v3-its: Correctly fish out the DID for platform MSI
irqchip/gic-v3-its: Correctly honor the RID remapping
genirq/msi: Move msi_device_data to core
genirq/msi: Remove platform MSI leftovers
irqchip/irq-mvebu-icu: Remove platform MSI leftovers
irqchip/irq-mvebu-sei: Switch to MSI parent
irqchip/mvebu-odmi: Switch to parent MSI
irqchip/mvebu-gicp: Switch to MSI parent
irqchip/irq-mvebu-icu: Prepare for real per device MSI
irqchip/imx-mu-msi: Switch to MSI parent
irqchip/gic-v2m: Switch to device MSI
irqchip/gic_v3_mbi: Switch over to parent domain
genirq/msi: Remove platform_msi_create_device_domain()
irqchip/mbigen: Remove platform_msi_create_device_domain() fallback
irqchip/gic-v3-its: Switch platform MSI to MSI parent
irqchip/irq-msi-lib: Prepare for DOMAIN_BUS_WIRED_TO_MSI
irqchip/mbigen: Prepare for real per device MSI
irqchip/irq-msi-lib: Prepare for DEVICE MSI to replace platform MSI
irqchip/gic-v3-its: Provide MSI parent for PCI/MSI[-X]
irqchip/irq-msi-lib: Prepare for PCI MSI/MSIX
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Core:
- Provide a new mechanism to create interrupt domains. The existing
interfaces have already too many parameters and it's a pain to
expand any of this for new required functionality.
The new function takes a pointer to a data structure as argument.
The data structure combines all existing parameters and allows for
easy extension.
The first extension for this is to handle the instantiation of
generic interrupt chips at the core level and to allow drivers to
provide extra init/exit callbacks.
This is necessary to do the full interrupt chip initialization
before the new domain is published, so that concurrent usage sites
won't see a half initialized interrupt domain. Similar problems
exist on teardown.
This has turned out to be a real problem due to the deferred and
parallel probing which was added in recent years.
Handling this at the core level allows to remove quite some accrued
boilerplate code in existing drivers and avoids horrible
workarounds at the driver level.
- The usual small improvements all over the place
Drivers:
- Add support for LAN966x OIC and RZ/Five SoC
- Split the STM ExtI driver into a microcontroller and a SMP version
to allow building the latter as a module for multi-platform
kernels
- Enable MSI support for Armada 370XP on platforms which do not
support IPIs
- The usual small fixes and enhancements all over the place"
* tag 'irq-core-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
irqdomain: Fix the kernel-doc and plug it into Documentation
genirq: Set IRQF_COND_ONESHOT in request_irq()
irqchip/imx-irqsteer: Handle runtime power management correctly
irqchip/gic-v3: Pass #redistributor-regions to gic_of_setup_kvm_info()
irqchip/bcm2835: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
irqchip/gic-v4: Make sure a VPE is locked when VMAPP is issued
irqchip/gic-v4: Substitute vmovp_lock for a per-VM lock
irqchip/gic-v4: Always configure affinity on VPE activation
Revert "irqchip/dw-apb-ictl: Support building as module"
Revert "Loongarch: Support loongarch avec"
arm64: Kconfig: Allow build irq-stm32mp-exti driver as module
ARM: stm32: Allow build irq-stm32mp-exti driver as module
irqchip/stm32mp-exti: Allow building as module
irqchip/stm32mp-exti: Rename internal symbols
irqchip/stm32-exti: Split MCU and MPU code
arm64: Kconfig: Select STM32MP_EXTI on STM32 platforms
ARM: stm32: Use different EXTI driver on ARMv7m and ARMv7a
irqchip/stm32-exti: Add CONFIG_STM32MP_EXTI
irqchip/dw-apb-ictl: Support building as module
irqchip/riscv-aplic: Simplify the initialization code
...
|
|
Pull more block updates from Jens Axboe:
- MD fixes via Song:
- md-cluster fixes (Heming Zhao)
- raid1 fix (Mateusz Jończyk)
- s390/dasd module description (Jeff)
- Series cleaning up and hardening the blk-mq debugfs flag handling
(John, Christoph)
- blk-cgroup cleanup (Xiu)
- Error polled IO attempts if backend doesn't support it (hexue)
- Fix for an sbitmap hang (Yang)
* tag 'for-6.11/block-20240722' of git://git.kernel.dk/linux: (23 commits)
blk-cgroup: move congestion_count to struct blkcg
sbitmap: fix io hung due to race on sbitmap_word::cleared
block: avoid polling configuration errors
block: Catch possible entries missing from rqf_name[]
block: Simplify definition of RQF_NAME()
block: Use enum to define RQF_x bit indexes
block: Catch possible entries missing from cmd_flag_name[]
block: Catch possible entries missing from alloc_policy_name[]
block: Catch possible entries missing from hctx_flag_name[]
block: Catch possible entries missing from hctx_state_name[]
block: Catch possible entries missing from blk_queue_flag_name[]
block: Make QUEUE_FLAG_x as an enum
block: Relocate BLK_MQ_MAX_DEPTH
block: Relocate BLK_MQ_CPU_WORK_BATCH
block: remove QUEUE_FLAG_STOPPED
block: Add missing entry to hctx_flag_name[]
block: Add zone write plugging entry to rqf_name[]
block: Add missing entries from cmd_flag_name[]
s390/dasd: fix error checks in dasd_copy_pair_store()
s390/dasd: add missing MODULE_DESCRIPTION() macros
...
|
