| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Make pci_stop_dev() and pci_destroy_dev() safe so concurrent
callers can't stop a device multiple times, even as we migrate from
the global pci_rescan_remove_lock to finer-grained locking (Keith
Busch)
- Improve pci_walk_bus() implementation by making it recursive and
moving locking up to avoid need for a 'locked' parameter (Keith
Busch)
- Unexport pci_walk_bus_locked(), which is only used internally by
the PCI core (Keith Busch)
- Detect some Thunderbolt chips that are built-in and hence
'trustworthy' by a heuristic since the 'ExternalFacingPort' and
'usb4-host-interface' ACPI properties are not quite enough (Esther
Shimanovich)
Resource management:
- Use PCI bus addresses (not CPU addresses) in 'ranges' properties
when building dynamic DT nodes so systems where PCI and CPU
addresses differ work correctly (Andrea della Porta)
- Tidy resource sizing and assignment with helpers to reduce
redundancy (Ilpo Järvinen)
- Improve pdev_sort_resources() 'bogus alignment' warning to be more
specific (Ilpo Järvinen)
Driver binding:
- Convert driver .remove_new() callbacks to .remove() again to finish
the conversion from returning 'int' to being 'void' (Sergio
Paracuellos)
- Export pcim_request_all_regions(), a managed interface to request
all BARs (Philipp Stanner)
- Replace pcim_iomap_regions_request_all() with
pcim_request_all_regions(), and pcim_iomap_table()[n] with
pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto
octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212
(Philipp Stanner)
- Remove the now unused pcim_iomap_regions_request_all() (Philipp
Stanner)
- Export pcim_iounmap_region(), a managed interface to unmap and
release a PCI BAR (Philipp Stanner)
- Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and
pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the
following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield,
cavium (Philipp Stanner)
Error handling:
- Add sysfs 'reset_subordinate' to reset the entire hierarchy below a
bridge; previously Secondary Bus Reset could only be used when
there was a single device below a bridge (Keith Busch)
- Warn if we reset a running device where the driver didn't register
pci_error_handlers notification callbacks (Keith Busch)
ASPM:
- Disable ASPM L1 before touching L1 PM Substates to follow the spec
closer and avoid a CPU load timeout on some platforms (Ajay
Agarwal)
- Set devices below Intel VMD to D0 before enabling ASPM L1 Substates
as required per spec for all L1 Substates changes (Jian-Hong Pan)
Power management:
- Enable starfive controller runtime PM before probing host bridge
(Mayank Rana)
- Enable runtime power management for host bridges (Krishna chaitanya
chundru)
Power control:
- Use of_platform_device_create() instead of of_platform_populate()
to create pwrctl platform devices so we can control it based on the
child nodes (Manivannan Sadhasivam)
- Create pwrctrl platform devices only if there's a relevant power
supply property (Manivannan Sadhasivam)
- Add device link from the pwrctl supplier to the PCI dev to ensure
pwrctl drivers are probed before the PCI dev driver; this avoids a
race where pwrctl could change device power state while the PCI
driver was active (Manivannan Sadhasivam)
- Find pwrctl device for removal with of_find_device_by_node()
instead of searching all children of the parent (Manivannan
Sadhasivam)
- Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller
('bwctrl') and hotplug files (Bjorn Helgaas)
Bandwidth control:
- Add read/modify/write locking for Link Control 2, which is used to
manage Link speed (Ilpo Järvinen)
- Extract Link Bandwidth Management Status check into
pcie_lbms_seen(), where it can be shared between the bandwidth
controller and quirks that use it to help retrain failed links
(Ilpo Järvinen)
- Re-add Link Bandwidth notification support with updates to address
the reasons it was previously reverted (Alexandru Gagniuc, Ilpo
Järvinen)
- Add pcie_set_target_speed() and related functionality so drivers
can manage PCIe Link speed based on thermal or other constraints
(Ilpo Järvinen)
- Add a thermal cooling driver to throttle PCIe Links via the
existing thermal management framework (Ilpo Järvinen)
- Add a userspace selftest for the PCIe bandwidth controller (Ilpo
Järvinen)
PCI device hotplug:
- Add hotplug controller driver for Marvell OCTEON multi-function
device where function 0 has a management console interface to
enable/disable and provision various personalities for the other
functions (Shijith Thotton)
- Retain a reference to the pci_bus for the lifetime of a pci_slot to
avoid a use-after-free when the thunderbolt driver resets USB4 host
routers on boot, causing hotplug remove/add of downstream docks or
other devices (Lukas Wunner)
- Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test
(Guilherme Giacomo Simoes)
- Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET)
- Use pci_bus_read_dev_vendor_id() instead of hand-coded presence
detection in cpqphp (Ilpo Järvinen)
- Simplify cpqphp enumeration, which is already simple-minded and
doesn't handle devices below hot-added bridges (Ilpo Järvinen)
Virtualization:
- Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS
capability but do isolate functions as though PCI_ACS_RR and
PCI_ACS_CR were set, so the functions can be in independent IOMMU
groups (Mengyuan Lou)
TLP Processing Hints (TPH):
- Add and document TLP Processing Hints (TPH) support so drivers can
enable and disable TPH and the kernel can save/restore TPH
configuration (Wei Huang)
- Add TPH Steering Tag support so drivers can retrieve Steering Tag
values associated with specific CPUs via an ACPI _DSM to improve
performance by directing DMA writes closer to their consumers (Wei
Huang)
Data Object Exchange (DOE):
- Wait up to 1 second for DOE Busy bit to clear before writing a
request to the mailbox to avoid failures if the mailbox is still
busy from a previous transfer (Gregory Price)
Endpoint framework:
- Skip attempts to allocate from endpoint controller memory window if
the requested size is larger than the window (Damien Le Moal)
- Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to
handle controller-specific size and alignment constraints, and add
test cases to the endpoint test driver (Damien Le Moal)
- Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can
observe DWC-specific alignment requirements (Damien Le Moal)
- Synchronously cancel command handler work in endpoint test before
cleaning up DMA and BARs (Damien Le Moal)
- Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas
Cassel)
- Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent
(Niklas Cassel)
- Avoid NULL dereference if Modem Host Interface Endpoint lacks
'mmio' DT property (Zhongqiu Han)
- Release PCI domain ID of Endpoint controller parent (not controller
itself) and before unregistering the controller, to avoid
use-after-free (Zijun Hu)
- Clear secondary (not primary) EPC in pci_epc_remove_epf() when
removing the secondary controller associated with an NTB (Zijun Hu)
Cadence PCIe controller driver:
- Lower severity of 'phy-names' message (Bartosz Wawrzyniak)
Freescale i.MX6 PCIe controller driver:
- Fix suspend/resume support on i.MX6QDL, which has a hardware
erratum that prevents use of L2 (Stefan Eichenberger)
Intel VMD host bridge driver:
- Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 DT binding to require the exact number of
clocks for each SoC (Fei Shao)
- Add support for DT 'max-link-speed' and 'num-lanes' properties to
restrict the link speed and width (AngeloGioacchino Del Regno)
Microchip PolarFlare PCIe controller driver:
- Add DT and driver support for using either of the two PolarFire
Root Ports (Conor Dooley)
NVIDIA Tegra194 PCIe controller driver:
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
Qualcomm PCIe controller driver:
- Add qcom SAR2130P DT binding with an additional clock (Dmitry
Baryshkov)
- Enable MSI interrupts if 'global' IRQ is supported, since a
previous commit unintentionally masked them (Manivannan Sadhasivam)
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
- Add DT binding and driver support for IPQ9574, with Synopsys IP
v5.80a and Qcom IP 1.27.0 (devi priya)
- Move the OPP "operating-points-v2" table from the
qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it
can be used by other Qcom platforms (Qiang Yu)
- Add 'global' SPI interrupt for events like link-up, link-down to
qcom,pcie-x1e80100 DT binding so we can start enumeration when the
link comes up (Qiang Yu)
- Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned
to support this (Qiang Yu)
- Add ops_1_21_0 for SC8280X family SoC, which doesn't use the
'iommu-map' DT property and doesn't need BDF-to-SID translation
(Qiang Yu)
Rockchip PCIe controller driver:
- Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint
.align value (Damien Le Moal)
- When unmapping an endpoint window, compute the region index instead
of searching for it, and verify that the address was mapped (Damien
Le Moal)
- When mapping an endpoint window, verify that the address hasn't
been mapped already (Damien Le Moal)
- Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal)
- Fix MSI IRQ data mapping to observe the alignment constraint, which
fixes intermittent page faults in memcpy_toio() and memcpy_fromio()
(Damien Le Moal)
- Rename rockchip_pcie_parse_ep_dt() to
rockchip_pcie_ep_get_resources() for consistency with similar DT
interfaces (Damien Le Moal)
- Skip the unnecessary link train in rockchip_pcie_ep_probe() and do
it only in the endpoint start operation (Damien Le Moal)
- Implement pci_epc_ops.stop_link() to disable link training and
controller configuration (Damien Le Moal)
- Attempt link training at 5 GT/s when both partners support it
(Damien Le Moal)
- Add a handler for PERST# signal so we can detect host-initiated
resets and start link training after PERST# is deasserted (Damien
Le Moal)
Synopsys DesignWare PCIe controller driver:
- Clear outbound address on unmap so dw_pcie_find_index() won't match
an ATU index that was already unmapped (Damien Le Moal)
- Use of_property_present() instead of of_property_read_bool() when
testing for presence of non-boolean DT properties (Rob Herring)
- Advertise 1MB size if endpoint supports Resizable BARs, which was
inadvertently lost in v6.11 (Niklas Cassel)
TI J721E PCIe driver:
- Add PCIe support for J722S SoC (Siddharth Vadapalli)
- Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100
us), before deasserting PERST# to ensure power and refclk are
stable (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root
Complex mode (Kishon Vijay Abraham I)
- Try to avoid unrecoverable SError for attempts to issue config
transactions when the link is down; this is racy but the best we
can do (Kishon Vijay Abraham I)
Miscellaneous:
- Reorganize kerneldoc parameter names to match order in function
signature (Julia Lawall)
- Fix sysfs reset_method_store() memory leak (Todd Kjos)
- Simplify pci_create_slot() (Ilpo Järvinen)
- Fix incorrect printf format specifiers in pcitest (Luo Yifan)"
* tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits)
PCI: rockchip-ep: Handle PERST# signal in EP mode
PCI: rockchip-ep: Improve link training
PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation
PCI: rockchip-ep: Refactor endpoint link training enable
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt()
PCI: rockchip-ep: Fix MSI IRQ data mapping
PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation
PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
PCI: rockchip-ep: Use a macro to define EP controller .align feature
PCI: rockchip-ep: Fix address translation unit programming
PCI/pwrctrl: Rename pwrctrl functions and structures
PCI/pwrctrl: Rename pwrctl files to pwrctrl
PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers
PCI/pwrctl: Create pwrctl device only if at least one power supply is present
PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
tools: PCI: Fix incorrect printf format specifiers
...
|
|
Commit b1fca27d384e ("kernel debug: support resetting WARN*_ONCE")
added support for clearing the state of once warnings. However,
it is not functional when CONFIG_LD_DEAD_CODE_DATA_ELIMINATION or
CONFIG_LTO_CLANG is enabled, because .data.once matches the
.data.[0-9a-zA-Z_]* pattern in the DATA_MAIN macro.
Commit cb87481ee89d ("kbuild: linker script do not match C names unless
LD_DEAD_CODE_DATA_ELIMINATION is configured") was introduced to suppress
the issue for the default CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=n case,
providing a minimal fix for stable backporting. We were aware this did
not address the issue for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y. The
plan was to apply correct fixes and then revert cb87481ee89d. [1]
Seven years have passed since then, yet the #ifdef workaround remains in
place. Meanwhile, commit b1fca27d384e introduced the .data.once section,
and commit dc5723b02e52 ("kbuild: add support for Clang LTO") extended
the #ifdef.
Using a ".." separator in the section name fixes the issue for
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION and CONFIG_LTO_CLANG.
[1]: https://lore.kernel.org/linux-kbuild/CAK7LNASck6BfdLnESxXUeECYL26yUDm0cwRZuM4gmaWUkxjL5g@mail.gmail.com/
Fixes: b1fca27d384e ("kernel debug: support resetting WARN*_ONCE")
Fixes: dc5723b02e52 ("kbuild: add support for Clang LTO")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit 7ccaba5314ca ("consolidate WARN_...ONCE() static variables")
was intended to collect all .data.unlikely sections into one chunk.
However, this has not worked when CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
or CONFIG_LTO_CLANG is enabled, because .data.unlikely matches the
.data.[0-9a-zA-Z_]* pattern in the DATA_MAIN macro.
Commit cb87481ee89d ("kbuild: linker script do not match C names unless
LD_DEAD_CODE_DATA_ELIMINATION is configured") was introduced to suppress
the issue for the default CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=n case,
providing a minimal fix for stable backporting. We were aware this did
not address the issue for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y. The
plan was to apply correct fixes and then revert cb87481ee89d. [1]
Seven years have passed since then, yet the #ifdef workaround remains in
place.
Using a ".." separator in the section name fixes the issue for
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION and CONFIG_LTO_CLANG.
[1]: https://lore.kernel.org/linux-kbuild/CAK7LNASck6BfdLnESxXUeECYL26yUDm0cwRZuM4gmaWUkxjL5g@mail.gmail.com/
Fixes: cb87481ee89d ("kbuild: linker script do not match C names unless LD_DEAD_CODE_DATA_ELIMINATION is configured")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs exportfs updates from Christian Brauner:
"This contains work to bring NFS connectable file handles to userspace
servers.
The name_to_handle_at() system call is extended to encode connectable
file handles. Such file handles can be resolved to an open file with a
connected path. So far userspace NFS servers couldn't make use of this
functionality even though the kernel does already support it. This is
achieved by introducing a new flag for name_to_handle_at().
Similarly, the open_by_handle_at() system call is tought to understand
connectable file handles explicitly created via name_to_handle_at()"
* tag 'vfs-6.13.exportfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: open_by_handle_at() support for decoding "explicit connectable" file handles
fs: name_to_handle_at() support for "explicit connectable" file handles
fs: prepare for "explicit connectable" file handles
|
|
Pull nfsd updates from Chuck Lever:
"Jeff Layton contributed a scalability improvement to NFSD's NFSv4
backchannel session implementation. This improvement is intended to
increase the rate at which NFSD can safely recall NFSv4 delegations
from clients, to avoid the need to revoke them. Revoking requires a
slow state recovery process.
A wide variety of bug fixes and other incremental improvements make up
the bulk of commits in this series. As always I am grateful to the
NFSD contributors, reviewers, testers, and bug reporters who
participated during this cycle"
* tag 'nfsd-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (72 commits)
nfsd: allow for up to 32 callback session slots
nfs_common: must not hold RCU while calling nfsd_file_put_local
nfsd: get rid of include ../internal.h
nfsd: fix nfs4_openowner leak when concurrent nfsd4_open occur
NFSD: Add nfsd4_copy time-to-live
NFSD: Add a laundromat reaper for async copy state
NFSD: Block DESTROY_CLIENTID only when there are ongoing async COPY operations
NFSD: Handle an NFS4ERR_DELAY response to CB_OFFLOAD
NFSD: Free async copy information in nfsd4_cb_offload_release()
NFSD: Fix nfsd4_shutdown_copy()
NFSD: Add a tracepoint to record canceled async COPY operations
nfsd: make nfsd4_session->se_flags a bool
nfsd: remove nfsd4_session->se_bchannel
nfsd: make use of warning provided by refcount_t
nfsd: Don't fail OP_SETCLIENTID when there are too many clients.
svcrdma: fix miss destroy percpu_counter in svc_rdma_proc_init()
xdrgen: Remove program_stat_to_errno() call sites
xdrgen: Update the files included in client-side source code
xdrgen: Remove check for "nfs_ok" in C templates
xdrgen: Remove tracepoint call site
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"This series introduces a device aliasing feature where user can carve
out partitions but reclaim the space back by deleting aliased file in
root dir.
In addition to that, there're numerous minor bug fixes in zoned device
support, checkpoint=disable, extent cache management, fiemap, and
lazytime mount option. The full list of noticeable changes can be
found below.
Enhancements:
- introduce device aliasing file
- add stats in debugfs to show multiple devices
- add a sysfs node to limit max read extent count per-inode
- modify f2fs_is_checkpoint_ready logic to allow more data to be
written with the CP disable
- decrease spare area for pinned files for zoned devices
Fixes:
- Revert "f2fs: remove unreachable lazytime mount option parsing"
- adjust unusable cap before checkpoint=disable mode
- fix to drop all discards after creating snapshot on lvm device
- fix to shrink read extent node in batches
- fix changing cursegs if recovery fails on zoned device
- fix to adjust appropriate length for fiemap
- fix fiemap failure issue when page size is 16KB
- fix to avoid forcing direct write to use buffered IO on inline_data
inode
- fix to map blocks correctly for direct write
- fix to account dirty data in __get_secs_required()
- fix null-ptr-deref in f2fs_submit_page_bio()
- fix inconsistent update of i_blocks in release_compress_blocks and
reserve_compress_blocks"
* tag 'f2fs-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (40 commits)
f2fs: fix to drop all discards after creating snapshot on lvm device
f2fs: add a sysfs node to limit max read extent count per-inode
f2fs: fix to shrink read extent node in batches
f2fs: print message if fscorrupted was found in f2fs_new_node_page()
f2fs: clear SBI_POR_DOING before initing inmem curseg
f2fs: fix changing cursegs if recovery fails on zoned device
f2fs: adjust unusable cap before checkpoint=disable mode
f2fs: fix to requery extent which cross boundary of inquiry
f2fs: fix to adjust appropriate length for fiemap
f2fs: clean up w/ F2FS_{BLK_TO_BYTES,BTYES_TO_BLK}
f2fs: fix to do cast in F2FS_{BLK_TO_BYTES, BTYES_TO_BLK} to avoid overflow
f2fs: replace deprecated strcpy with strscpy
Revert "f2fs: remove unreachable lazytime mount option parsing"
f2fs: fix to avoid forcing direct write to use buffered IO on inline_data inode
f2fs: fix to map blocks correctly for direct write
f2fs: fix race in concurrent f2fs_stop_gc_thread
f2fs: fix fiemap failure issue when page size is 16KB
f2fs: remove redundant atomic file check in defragment
f2fs: fix to convert log type to segment data type correctly
f2fs: clean up the unused variable additional_reserved_segments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Add page -> folio conversions (Joanne Koong, Josef Bacik)
- Allow max size of fuse requests to be configurable with a sysctl
(Joanne Koong)
- Allow FOPEN_DIRECT_IO to take advantage of async code path (yangyun)
- Fix large kernel reads (like a module load) in virtio_fs (Hou Tao)
- Fix attribute inconsistency in case readdirplus (and plain lookup in
corner cases) is racing with inode eviction (Zhang Tianci)
- Fix a WARN_ON triggered by virtio_fs (Asahi Lina)
* tag 'fuse-update-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (30 commits)
virtiofs: dax: remove ->writepages() callback
fuse: check attributes staleness on fuse_iget()
fuse: remove pages for requests and exclusively use folios
fuse: convert direct io to use folios
mm/writeback: add folio_mark_dirty_lock()
fuse: convert writebacks to use folios
fuse: convert retrieves to use folios
fuse: convert ioctls to use folios
fuse: convert writes (non-writeback) to use folios
fuse: convert reads to use folios
fuse: convert readdir to use folios
fuse: convert readlink to use folios
fuse: convert cuse to use folios
fuse: add support in virtio for requests using folios
fuse: support folios in struct fuse_args_pages and fuse_copy_pages()
fuse: convert fuse_notify_store to use folios
fuse: convert fuse_retrieve to use folios
fuse: use the folio based vmstat helpers
fuse: convert fuse_writepage_need_send to take a folio
fuse: convert fuse_do_readpage to use folios
...
|
|
The merge commit ae3325f752ef ("Merge branches 'arm/smmu', 'mediatek',
's390', 'ti/omap', 'riscv' and 'core' into next") left a stale
declaration of 'iommu_present()' even though the 'core' branch that was
merged had removed the function (and the declaration).
Remove it for real.
Reported-by: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull nvdimm and DAX updates from Ira Weiny:
"Most represent minor cleanups and code removals. One patch fixes
potential NULL pointer arithmetic which was benign because the offset
of the member was 0. Nevertheless it should be cleaned up.
- typo fixes
- clarify logic to remove potential NULL pointer math
- remove dead code"
* tag 'libnvdimm-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: Remove an unused field in struct dax_operations
dax: delete a stale directory pmem
nvdimm: rectify the illogical code within nd_dax_probe()
nvdimm: Correct some typos in comments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time.
New drivers:
- Xlinix Versal pin control driver
- Ocelot LAN969x pin control driver
- T-Head TH1520 RISC-V SoC pin control driver
- Qualcomm SM8750, IPQ5424, QCS8300, SAR2130P and QCS615 SoC pin
control drivers
- Qualcomm SM8750 LPASS (low power audio subsystem) pin control
driver
- Qualcomm PM8937 mixsig IC pin control support, GPIO and MPP
(multi-purpose-pin)
- Samsung Exynos8895 and Exynos9810 SoC pin control driver
- SpacemiT K1 SoC pin control driver
- Airhoa EN7581 IC pin control driver
Improvements:
- The Renesas subdriver now supports schmitt-trigger and open drain
pin configurations if the hardware supports it
- Support GPIOF and GPIOG banks in the Aspeed G6 SoC
- Support the DSW community in the Intel Elkhartlake SoC"
* tag 'pinctrl-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits)
pinctrl: airoha: Use unsigned long for bit search
pinctrl: k210: Undef K210_PC_DEFAULT
pinctrl: qcom: spmi: fix debugfs drive strength
pinctrl: qcom: Add sm8750 pinctrl driver
dt-bindings: pinctrl: qcom: Add sm8750 pinctrl
pinctrl: cy8c95x0: remove unneeded goto labels
pinctrl: cy8c95x0: embed iterator to the for-loop
pinctrl: cy8c95x0: Use temporary variable for struct device
pinctrl: cy8c95x0: use flexible sleeping in reset function
pinctrl: cy8c95x0: switch to using devm_regulator_get_enable()
pinctrl: cy8c95x0: Use 2-argument strscpy()
dt-bindings: pinctrl: sx150xq: allow gpio line naming
pinctrl: single: add marvell,pxa1908-padconf compatible
dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible
dt-bindings: pinctrl: correct typo of description for cv1800
pinctrl: qcom: spmi-mpp: Add PM8937 compatible
dt-bindings: pinctrl: qcom,pmic-mpp: Document PM8937 compatible
pinctrl: qcom-pmic-gpio: add support for PM8937
dt-bindings: pinctrl: qcom,pmic-gpio: add PM8937
pinctrl: Use of_property_present() for non-boolean properties
...
|
|
Using scoped_guard() in the implementation of trace_##name() adds an
unnecessary level of indentation.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Michael Jeanson <mjeanson@efficios.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: bpf@vger.kernel.org
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Jordan Rife <jrife@google.com>
Link: https://lore.kernel.org/20241125142514.2897143-1-mathieu.desnoyers@efficios.com
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- Add new slab_strict_numa boot parameter to enforce per-object memory
policies on top of slab folio policies, for systems where saving cost
of remote accesses is more important than minimizing slab allocation
overhead (Christoph Lameter)
- Fix for freeptr_offset alignment check being too strict for m68k
(Geert Uytterhoeven)
- krealloc() fixes for not violating __GFP_ZERO guarantees on
krealloc() when slub_debug (redzone and object tracking) is enabled
(Feng Tang)
- Fix a memory leak in case sysfs registration fails for a slab cache,
and also no longer fail to create the cache in that case (Hyeonggon
Yoo)
- Fix handling of detected consistency problems (due to buggy slab
user) with slub_debug enabled, so that it does not cause further list
corruption bugs (yuan.gao)
- Code cleanup and kerneldocs polishing (Zhen Lei, Vlastimil Babka)
* tag 'slab-for-6.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: Fix too strict alignment check in create_cache()
mm/slab: Allow cache creation to proceed even if sysfs registration fails
mm/slub: Avoid list corruption when removing a slab from the full list
mm/slub, kunit: Add testcase for krealloc redzone and zeroing
mm/slub: Improve redzone check and zeroing for krealloc()
mm/slub: Consider kfence case for get_orig_size()
SLUB: Add support for per object memory policies
mm, slab: add kerneldocs for common SLAB_ flags
mm/slab: remove duplicate check in create_cache()
mm/slub: Move krealloc() and related code to slub.c
mm/kasan: Don't store metadata inside kmalloc object when slub_debug_orig_size is on
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- The series "resource: A couple of cleanups" from Andy Shevchenko
performs some cleanups in the resource management code
- The series "Improve the copy of task comm" from Yafang Shao addresses
possible race-induced overflows in the management of
task_struct.comm[]
- The series "Remove unnecessary header includes from
{tools/}lib/list_sort.c" from Kuan-Wei Chiu adds some cleanups and a
small fix to the list_sort library code and to its selftest
- The series "Enhance min heap API with non-inline functions and
optimizations" also from Kuan-Wei Chiu optimizes and cleans up the
min_heap library code
- The series "nilfs2: Finish folio conversion" from Ryusuke Konishi
finishes off nilfs2's folioification
- The series "add detect count for hung tasks" from Lance Yang adds
more userspace visibility into the hung-task detector's activity
- Apart from that, singelton patches in many places - please see the
individual changelogs for details
* tag 'mm-nonmm-stable-2024-11-24-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits)
gdb: lx-symbols: do not error out on monolithic build
kernel/reboot: replace sprintf() with sysfs_emit()
lib: util_macros_kunit: add kunit test for util_macros.h
util_macros.h: fix/rework find_closest() macros
Improve consistency of '#error' directive messages
ocfs2: fix uninitialized value in ocfs2_file_read_iter()
hung_task: add docs for hung_task_detect_count
hung_task: add detect count for hung tasks
dma-buf: use atomic64_inc_return() in dma_buf_getfile()
fs/proc/kcore.c: fix coccinelle reported ERROR instances
resource: avoid unnecessary resource tree walking in __region_intersects()
ocfs2: remove unused errmsg function and table
ocfs2: cluster: fix a typo
lib/scatterlist: use sg_phys() helper
checkpatch: always parse orig_commit in fixes tag
nilfs2: convert metadata aops from writepage to writepages
nilfs2: convert nilfs_recovery_copy_block() to take a folio
nilfs2: convert nilfs_page_count_clean_buffers() to take a folio
nilfs2: remove nilfs_writepage
nilfs2: convert checkpoint file to be folio-based
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull rust trace event support from Steven Rostedt:
"Allow Rust code to have trace events
Trace events is a popular way to debug what is happening inside the
kernel or just to find out what is happening. Rust code is being added
to the Linux kernel but it currently does not support the tracing
infrastructure. Add support of trace events inside Rust code"
* tag 'trace-rust-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rust: jump_label: skip formatting generated file
jump_label: rust: pass a mut ptr to `static_key_count`
samples: rust: fix `rust_print` build making it a combined module
rust: add arch_static_branch
jump_label: adjust inline asm to be consistent
rust: samples: add tracepoint to Rust sample
rust: add tracepoint support
rust: add static_branch_unlikely for static_key_false
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Disable __counted_by in Clang < 19.1.3 (Jan Hendrik Farr)
- string_helpers: Silence output truncation warning (Bartosz
Golaszewski)
- compiler.h: Avoid needing BUILD_BUG_ON_ZERO() (Philipp Reisner)
- MAINTAINERS: Add kernel hardening keywords __counted_by{_le|_be}
(Thorsten Blum)
* tag 'hardening-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Compiler Attributes: disable __counted_by for clang < 19.1.3
compiler.h: Fix undefined BUILD_BUG_ON_ZERO()
lib: string_helpers: silence snprintf() output truncation warning
MAINTAINERS: Add kernel hardening keywords __counted_by{_le|_be}
|
|
- Add pci_epc_function_is_valid() to avoid repeating common validation
checks (Damien Le Moal)
- Skip attempts to allocate from endpoint controller memory window if the
requested size is larger than the window (Damien Le Moal)
- Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to handle
controller-specific size and alignment constraints, and add test cases to
the endpoint test driver (Damien Le Moal)
- Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can observe
DWC-specific alignment requirements (Damien Le Moal)
- Synchronously cancel command handler work in endpoint test before
cleaning up DMA and BARs (Damien Le Moal)
- Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas Cassel)
- Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent (Niklas
Cassel)
- Remove superfluous 'return' from pci_epf_test_clean_dma_chan() (Wang
Jiang)
- Avoid NULL dereference if Modem Host Interface Endpoint lacks 'mmio' DT
property (Zhongqiu Han)
- Release PCI domain ID of Endpoint controller parent (not controller
itself) and before unregistering the controller, to avoid use-after-free
(Zijun Hu)
- Clear secondary (not primary) EPC in pci_epc_remove_epf() when removing
the secondary controller associated with an NTB (Zijun Hu)
- Fix pci_epc_map map_size kerneldoc (Rick Wertenbroek)
* pci/endpoint:
PCI: endpoint: Fix pci_epc_map map_size kerneldoc string
PCI: endpoint: Clear secondary (not primary) EPC in pci_epc_remove_epf()
PCI: endpoint: Fix PCI domain ID release in pci_epc_destroy()
PCI: endpoint: epf-mhi: Avoid NULL dereference if DT lacks 'mmio'
PCI: endpoint: Remove surplus return statement from pci_epf_test_clean_dma_chan()
PCI: dwc: ep: Use align addr function for dw_pcie_ep_raise_{msi,msix}_irq()
PCI: endpoint: test: Synchronously cancel command handler work
PCI: dwc: endpoint: Implement the pci_epc_ops::align_addr() operation
PCI: endpoint: test: Use pci_epc_mem_map/unmap()
PCI: endpoint: Update documentation
PCI: endpoint: Introduce pci_epc_mem_map()/unmap()
PCI: endpoint: Improve pci_epc_mem_alloc_addr()
PCI: endpoint: Introduce pci_epc_function_is_valid()
|
|
- Add and document TLP Processing Hints (TPH) support so drivers can enable
and disable TPH and the kernel can save/restore TPH configuration (Wei
Huang)
- Add TPH Steering Tag support so drivers can retrieve Steering Tag values
associated with specific CPUs via an ACPI _DSM to direct DMA writes
closer to their consumers (Wei Huang)
* pci/tph:
PCI/TPH: Add TPH documentation
PCI/TPH: Add Steering Tag support
PCI: Add TLP Processing Hints (TPH) support
|
|
- Detect some Thunderbolt chips that are built-in and hence 'trustworthy'
by a heuristic since the 'ExternalFacingPort' and 'usb4-host-interface'
ACPI properties are not quite enough (Esther Shimanovich)
* pci/thunderbolt:
PCI: Detect and trust built-in Thunderbolt chips
|
|
- Add resource_set_size() to set resource size when start has already been
set (Ilpo Järvinen)
- Add resource_set_range() helper to set both resource start and size (Ilpo
Järvinen)
- Use IS_ALIGNED() and resource_size() in quirk_s3_64M() instead of
open-coding them (Ilpo Järvinen)
- Add ALIGN_DOWN_IF_NONZERO() to avoid code duplication when distributing
resources across devices (Ilpo Järvinen)
- Improve pdev_sort_resources() warning message to be more specific (Ilpo
Järvinen)
* pci/resource:
PCI: Improve pdev_sort_resources() warning message
PCI: Add ALIGN_DOWN_IF_NONZERO() helper
PCI: Use align and resource helpers, and SZ_* in quirk_s3_64M()
PCI: Use resource_set_{range,size}() helpers
resource: Add resource set range and size helpers
|
|
- Use of_platform_device_create() instead of of_platform_populate() to
create pwrctl platform devices so we can control it based on the child
nodes (Manivannan Sadhasivam)
- Create pwrctrl platform devices only if there's a relevant power supply
property (Manivannan Sadhasivam)
- Add device link from the pwrctl supplier to the PCI dev to ensure pwrctl
drivers are probed before the PCI dev driver; this avoids a race where
pwrctl could change device power state while the PCI driver was active
(Manivannan Sadhasivam)
- Find pwrctl device for removal with of_find_device_by_node() instead of
searching all children of the parent (Manivannan Sadhasivam)
- Rename 'pwrctl' to 'pwrctrl' to use the same 'ctrl' suffix as 'bwctrl'
and other PCI files to reduce confusion (Bjorn Helgaas)
* pci/pwrctl:
PCI/pwrctrl: Rename pwrctrl functions and structures
PCI/pwrctrl: Rename pwrctl files to pwrctrl
PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers
PCI/pwrctl: Create pwrctl device only if at least one power supply is present
PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
# Conflicts:
# drivers/pci/bus.c
# drivers/pci/remove.c
|
|
- Make pci_stop_dev() and pci_destroy_dev() concurrent safe (Keith Busch)
- Move __pci_walk_bus() mutex up into the caller, which avoids the need for
a parameter to control locking (Keith Busch)
- Simplify __pci_walk_bus() by making it recursive (Keith Busch)
- Unexport pci_walk_bus_locked(), which is only used internally by the PCI
core (Keith Busch)
* pci/locking:
PCI: Unexport pci_walk_bus_locked()
PCI: Convert __pci_walk_bus() to be recursive
PCI: Move __pci_walk_bus() mutex to where we need it
PCI: Make pci_destroy_dev() concurrent safe
PCI: Make pci_stop_dev() concurrent safe
|
|
- Simplify pci_read_bridge_bases() logic (Ilpo Järvinen)
* pci/enumeration:
PCI: Simplify pci_read_bridge_bases() logic
PCI: Move struct pci_bus_resource into bus.c
PCI: Remove unused PCI_SUBTRACTIVE_DECODE
|
|
- Export pcim_request_all_regions(), a managed interface to request all
BARs (Philipp Stanner)
- Replace pcim_iomap_regions_request_all() with pcim_request_all_regions(),
and pcim_iomap_table()[n] with pcim_iomap(n), in the following drivers:
ahci, crypto qat, crypto octeontx2, intel_th, iwlwifi, ntb idt, serial
rp2, ALSA korg1212 (Philipp Stanner)
- Remove the now unused pcim_iomap_regions_request_all() (Philipp Stanner)
- Export pcim_iounmap_region(), a managed interface to unmap and release a
PCI BAR (Philipp Stanner)
- Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and
pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the following
drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield, cavium (Philipp
Stanner)
* pci/devm:
ethernet: cavium: Replace deprecated PCI functions
gpio: Replace deprecated PCI functions
fpga/dfl-pci.c: Replace deprecated PCI functions
PCI: Deprecate pcim_iounmap_regions()
PCI: Make pcim_iounmap_region() a public function
PCI: Remove pcim_iomap_regions_request_all()
ALSA: korg1212: Replace deprecated PCI functions
serial: rp2: Replace deprecated PCI functions
ntb: idt: Replace deprecated PCI functions
wifi: iwlwifi: replace deprecated PCI functions
intel_th: pci: Replace deprecated PCI functions
crypto: marvell - replace deprecated PCI functions
crypto: qat - replace deprecated PCI functions
ata: ahci: Replace deprecated PCI functions
PCI: Make pcim_request_all_regions() a public function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for NT36672A touchscreen added to novatek-nvt-ts driver
- a change to ads7846 driver to prevent XPT2046 from locking up
- a change switching platform input dirves back to using remove()
method (from remove_new())
- updates to a number of input drivers to use the new cleanup
facilities (__free(...), guard(), and scoped-guard()) which ensure
that the resources and locks are released properly and automatically
- other assorted driver cleanups and fixes.
* tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (109 commits)
Input: mpr121 - use devm_regulator_get_enable_read_voltage()
Input: sun4i-lradc-keys - don't include 'pm_wakeup.h' directly
Input: spear-keyboard - don't include 'pm_wakeup.h' directly
Input: cypress-sf - constify struct i2c_device_id
Input: ads7846 - increase xfer array size in 'struct ser_req'
Input: fix the input_event struct documentation
Input: i8042 - fix typo dublicate to duplicate
Input: ads7846 - add dummy command register clearing cycle
Input: cs40l50 - fix wrong usage of INIT_WORK()
Input: introduce notion of passive observers for input handlers
Input: maple_keyb - use guard notation when acquiring mutex
Input: locomokbd - use guard notation when acquiring spinlock
Input: hilkbd - use guard notation when acquiring spinlock
Input: synaptics-rmi4 - switch to using cleanup functions in F34
Input: synaptics - fix a typo
dt-bindings: input: rotary-encoder: Fix "rotary-encoder,rollover" type
Input: omap-keypad - use guard notation when acquiring mutex
Input: imagis - fix warning regarding 'imagis_3038_data' being unused
Input: userio - remove unneeded semicolon
Input: sparcspkr - use cleanup facility for device_node
...
|
|
Prepare input updates for 6.13 merge window.
|
|
Pull kvm updates from Paolo Bonzini:
"The biggest change here is eliminating the awful idea that KVM had of
essentially guessing which pfns are refcounted pages.
The reason to do so was that KVM needs to map both non-refcounted
pages (for example BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP
VMAs that contain refcounted pages.
However, the result was security issues in the past, and more recently
the inability to map VM_IO and VM_PFNMAP memory that _is_ backed by
struct page but is not refcounted. In particular this broke virtio-gpu
blob resources (which directly map host graphics buffers into the
guest as "vram" for the virtio-gpu device) with the amdgpu driver,
because amdgpu allocates non-compound higher order pages and the tail
pages could not be mapped into KVM.
This requires adjusting all uses of struct page in the
per-architecture code, to always work on the pfn whenever possible.
The large series that did this, from David Stevens and Sean
Christopherson, also cleaned up substantially the set of functions
that provided arch code with the pfn for a host virtual addresses.
The previous maze of twisty little passages, all different, is
replaced by five functions (__gfn_to_page, __kvm_faultin_pfn, the
non-__ versions of these two, and kvm_prefetch_pages) saving almost
200 lines of code.
ARM:
- Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
- Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This
call was introduced in PSCIv1.3 as a mechanism to request
hibernation, similar to the S4 state in ACPI
- Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
- PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
- Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
- Avoid emulated MMIO completion if userspace has requested
synchronous external abort injection
- Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
LoongArch:
- Add iocsr and mmio bus simulation in kernel.
- Add in-kernel interrupt controller emulation.
- Add support for virtualization extensions to the eiointc irqchip.
PPC:
- Drop lingering and utterly obsolete references to PPC970 KVM, which
was removed 10 years ago.
- Fix incorrect documentation references to non-existing ioctls
RISC-V:
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
s390:
- New selftests: more ucontrol selftests and CPU model sanity checks
- Support for the gen17 CPU model
- List registers supported by KVM_GET/SET_ONE_REG in the
documentation
x86:
- Cleanup KVM's handling of Accessed and Dirty bits to dedup code,
improve documentation, harden against unexpected changes.
Even if the hardware A/D tracking is disabled, it is possible to
use the hardware-defined A/D bits to track if a PFN is Accessed
and/or Dirty, and that removes a lot of special cases.
- Elide TLB flushes when aging secondary PTEs, as has been done in
x86's primary MMU for over 10 years.
- Recover huge pages in-place in the TDP MMU when dirty page logging
is toggled off, instead of zapping them and waiting until the page
is re-accessed to create a huge mapping. This reduces vCPU jitter.
- Batch TLB flushes when dirty page logging is toggled off. This
reduces the time it takes to disable dirty logging by ~3x.
- Remove the shrinker that was (poorly) attempting to reclaim shadow
page tables in low-memory situations.
- Clean up and optimize KVM's handling of writes to
MSR_IA32_APICBASE.
- Advertise CPUIDs for new instructions in Clearwater Forest
- Quirk KVM's misguided behavior of initialized certain feature MSRs
to their maximum supported feature set, which can result in KVM
creating invalid vCPU state. E.g. initializing PERF_CAPABILITIES to
a non-zero value results in the vCPU having invalid state if
userspace hides PDCM from the guest, which in turn can lead to
save/restore failures.
- Fix KVM's handling of non-canonical checks for vCPUs that support
LA57 to better follow the "architecture", in quotes because the
actual behavior is poorly documented. E.g. most MSR writes and
descriptor table loads ignore CR4.LA57 and operate purely on
whether the CPU supports LA57.
- Bypass the register cache when querying CPL from kvm_sched_out(),
as filling the cache from IRQ context is generally unsafe; harden
the cache accessors to try to prevent similar issues from occuring
in the future. The issue that triggered this change was already
fixed in 6.12, but was still kinda latent.
- Advertise AMD_IBPB_RET to userspace, and fix a related bug where
KVM over-advertises SPEC_CTRL when trying to support cross-vendor
VMs.
- Minor cleanups
- Switch hugepage recovery thread to use vhost_task.
These kthreads can consume significant amounts of CPU time on
behalf of a VM or in response to how the VM behaves (for example
how it accesses its memory); therefore KVM tried to place the
thread in the VM's cgroups and charge the CPU time consumed by that
work to the VM's container.
However the kthreads did not process SIGSTOP/SIGCONT, and therefore
cgroups which had KVM instances inside could not complete freezing.
Fix this by replacing the kthread with a PF_USER_WORKER thread, via
the vhost_task abstraction. Another 100+ lines removed, with
generally better behavior too like having these threads properly
parented in the process tree.
- Revert a workaround for an old CPU erratum (Nehalem/Westmere) that
didn't really work; there was really nothing to work around anyway:
the broken patch was meant to fix nested virtualization, but the
PERF_GLOBAL_CTRL MSR is virtualized and therefore unaffected by the
erratum.
- Fix 6.12 regression where CONFIG_KVM will be built as a module even
if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is
'y'.
x86 selftests:
- x86 selftests can now use AVX.
Documentation:
- Use rST internal links
- Reorganize the introduction to the API document
Generic:
- Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock
instead of RCU, so that running a vCPU on a different task doesn't
encounter long due to having to wait for all CPUs become quiescent.
In general both reads and writes are rare, but userspace that
supports confidential computing is introducing the use of "helper"
vCPUs that may jump from one host processor to another. Those will
be very happy to trigger a synchronize_rcu(), and the effect on
performance is quite the disaster"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (298 commits)
KVM: x86: Break CONFIG_KVM_X86's direct dependency on KVM_INTEL || KVM_AMD
KVM: x86: add back X86_LOCAL_APIC dependency
Revert "KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config()"
KVM: x86: switch hugepage recovery thread to vhost_task
KVM: x86: expose MSR_PLATFORM_INFO as a feature MSR
x86: KVM: Advertise CPUIDs for new instructions in Clearwater Forest
Documentation: KVM: fix malformed table
irqchip/loongson-eiointc: Add virt extension support
LoongArch: KVM: Add irqfd support
LoongArch: KVM: Add PCHPIC user mode read and write functions
LoongArch: KVM: Add PCHPIC read and write functions
LoongArch: KVM: Add PCHPIC device support
LoongArch: KVM: Add EIOINTC user mode read and write functions
LoongArch: KVM: Add EIOINTC read and write functions
LoongArch: KVM: Add EIOINTC device support
LoongArch: KVM: Add IPI user mode read and write function
LoongArch: KVM: Add IPI read and write function
LoongArch: KVM: Add IPI device support
LoongArch: KVM: Add iocsr and mmio bus simulation in kernel
KVM: arm64: Pass on SVE mapping failures
...
|
|
Syscall tracepoints do not require a "cond" argument, because they are
meant to be used only for sys_enter and sys_exit instrumentation, which
don't require condition evaluation.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Michael Jeanson <mjeanson@efficios.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: bpf@vger.kernel.org
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Jordan Rife <jrife@google.com>
Cc: linux-trace-kernel@vger.kernel.org
Link: https://lore.kernel.org/20241123153031.2884933-6-mathieu.desnoyers@efficios.com
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Remove conditional locking by moving the __DO_TRACE() code into
trace_##name().
When the faultable syscall tracepoints were implemented, __DO_TRACE()
had a rcuidle argument which selected between SRCU and preempt disable.
Therefore, the RCU tasks trace protection for faultable syscall
tracepoints was introduced using the same pattern.
At that point, it did not appear obvious that this feedback from Linus [1]
applied here as well, because the __DO_TRACE() modification was
extending a pre-existing pattern.
Shortly before pulling the faultable syscall tracepoints modifications,
Steven removed the rcuidle argument and SRCU protection scheme entirely
from tracepoint.h:
commit 48bcda684823 ("tracing: Remove definition of trace_*_rcuidle()")
This required a rebase of the faultable syscall tracepoints series,
which missed a perfect opportunity to integrate the prior recommendation
from Linus.
In response to the pull request, Linus pointed out [2] that he was not
pleased by the implementation, expecting this to be fixed in a follow up
patch series.
Move __DO_TRACE() code into trace_##name() within each of
__DECLARE_TRACE() and __DECLARE_TRACE_SYSCALL(). Use a scoped guard
to guard the preempt disable notrace and RCU tasks trace critical
sections.
Link: https://lore.kernel.org/all/CAHk-=wggDLDeTKbhb5hh--x=-DQd69v41137M72m6NOTmbD-cw@mail.gmail.com/ [1]
Link: https://lore.kernel.org/lkml/CAHk-=witPrLcu22dZ93VCyRQonS7+-dFYhQbna=KBa-TAhayMw@mail.gmail.com/ [2]
Fixes: a363d27cdbc2 ("tracing: Allow system call tracepoints to handle page faults")
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Michael Jeanson <mjeanson@efficios.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: bpf@vger.kernel.org
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Jordan Rife <jrife@google.com>
Cc: linux-trace-kernel@vger.kernel.org
Link: https://lore.kernel.org/20241123153031.2884933-5-mathieu.desnoyers@efficios.com
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Define a rcu_tasks_trace lock guard for use by the syscall enter/exit
tracepoints.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Michael Jeanson <mjeanson@efficios.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: bpf@vger.kernel.org
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Jordan Rife <jrife@google.com>
Cc: linux-trace-kernel@vger.kernel.org
Link: https://lore.kernel.org/20241123153031.2884933-4-mathieu.desnoyers@efficios.com
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Since the removal of SRCU-protected tracepoints, the __idx variable in
__DO_TRACE is unused. Remove this variable.
Fixes: 48bcda684823 ("tracing: Remove definition of trace_*_rcuidle()")
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Michael Jeanson <mjeanson@efficios.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: bpf@vger.kernel.org
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Jordan Rife <jrife@google.com>
Link: https://lore.kernel.org/20241123153031.2884933-3-mathieu.desnoyers@efficios.com
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When introducing __DO_TRACE_CALL(), the iteration over it_func moved
from __DO_TRACE() to __tracepoint_iter_##_name(), but the comment
relevant for this iterator was left in its original location.
Move the comment to the relevant context.
Fixes: d25e37d89dd2 ("tracepoint: Optimize using static_call()")
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Michael Jeanson <mjeanson@efficios.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: bpf@vger.kernel.org
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Jordan Rife <jrife@google.com>
Link: https://lore.kernel.org/20241123153031.2884933-2-mathieu.desnoyers@efficios.com
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "zram: optimal post-processing target selection" from
Sergey Senozhatsky improves zram's post-processing selection
algorithm. This leads to improved memory savings.
- Wei Yang has gone to town on the mapletree code, contributing several
series which clean up the implementation:
- "refine mas_mab_cp()"
- "Reduce the space to be cleared for maple_big_node"
- "maple_tree: simplify mas_push_node()"
- "Following cleanup after introduce mas_wr_store_type()"
- "refine storing null"
- The series "selftests/mm: hugetlb_fault_after_madv improvements" from
David Hildenbrand fixes this selftest for s390.
- The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
implements some rationaizations and cleanups in the page mapping
code.
- The series "mm: optimize shadow entries removal" from Shakeel Butt
optimizes the file truncation code by speeding up the handling of
shadow entries.
- The series "Remove PageKsm()" from Matthew Wilcox completes the
migration of this flag over to being a folio-based flag.
- The series "Unify hugetlb into arch_get_unmapped_area functions" from
Oscar Salvador implements a bunch of consolidations and cleanups in
the hugetlb code.
- The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
takes away the wp-fault time practice of turning a huge zero page
into small pages. Instead we replace the whole thing with a THP. More
consistent cleaner and potentiall saves a large number of pagefaults.
- The series "percpu: Add a test case and fix for clang" from Andy
Shevchenko enhances and fixes the kernel's built in percpu test code.
- The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
optimizes mremap() by avoiding doing things which we didn't need to
do.
- The series "Improve the tmpfs large folio read performance" from
Baolin Wang teaches tmpfs to copy data into userspace at the folio
size rather than as individual pages. A 20% speedup was observed.
- The series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON
splitting.
- The series "memcg-v1: fully deprecate charge moving" from Shakeel
Butt removes the long-deprecated memcgv2 charge moving feature.
- The series "fix error handling in mmap_region() and refactor" from
Lorenzo Stoakes cleanup up some of the mmap() error handling and
addresses some potential performance issues.
- The series "x86/module: use large ROX pages for text allocations"
from Mike Rapoport teaches x86 to use large pages for
read-only-execute module text.
- The series "page allocation tag compression" from Suren Baghdasaryan
is followon maintenance work for the new page allocation profiling
feature.
- The series "page->index removals in mm" from Matthew Wilcox remove
most references to page->index in mm/. A slow march towards shrinking
struct page.
- The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests" from Andrew Paniakin performs maintenance work for
DAMON's self testing code.
- The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
improves zswap's batching of compression and decompression. It is a
step along the way towards using Intel IAA hardware acceleration for
this zswap operation.
- The series "kasan: migrate the last module test to kunit" from
Sabyrzhan Tasbolatov completes the migration of the KASAN built-in
tests over to the KUnit framework.
- The series "implement lightweight guard pages" from Lorenzo Stoakes
permits userapace to place fault-generating guard pages within a
single VMA, rather than requiring that multiple VMAs be created for
this. Improved efficiencies for userspace memory allocators are
expected.
- The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
tracepoints to provide increased visibility into memcg stats flushing
activity.
- The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
fixes a zram buglet which potentially affected performance.
- The series "mm: add more kernel parameters to control mTHP" from
Maíra Canal enhances our ability to control/configuremultisize THP
from the kernel boot command line.
- The series "kasan: few improvements on kunit tests" from Sabyrzhan
Tasbolatov has a couple of fixups for the KASAN KUnit tests.
- The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
from Kairui Song optimizes list_lru memory utilization when lockdep
is enabled.
* tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (215 commits)
cma: enforce non-zero pageblock_order during cma_init_reserved_mem()
mm/kfence: add a new kunit test test_use_after_free_read_nofault()
zram: fix NULL pointer in comp_algorithm_show()
memcg/hugetlb: add hugeTLB counters to memcg
vmstat: call fold_vm_zone_numa_events() before show per zone NUMA event
mm: mmap_lock: check trace_mmap_lock_$type_enabled() instead of regcount
zram: ZRAM_DEF_COMP should depend on ZRAM
MAINTAINERS/MEMORY MANAGEMENT: add document files for mm
Docs/mm/damon: recommend academic papers to read and/or cite
mm: define general function pXd_init()
kmemleak: iommu/iova: fix transient kmemleak false positive
mm/list_lru: simplify the list_lru walk callback function
mm/list_lru: split the lock to per-cgroup scope
mm/list_lru: simplify reparenting and initial allocation
mm/list_lru: code clean up for reparenting
mm/list_lru: don't export list_lru_add
mm/list_lru: don't pass unnecessary key parameters
kasan: add kunit tests for kmalloc_track_caller, kmalloc_node_track_caller
kasan: change kasan_atomics kunit test as KUNIT_CASE_SLOW
kasan: use EXPORT_SYMBOL_IF_KUNIT to export symbols
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs updates from Amir Goldstein:
- Fix a syzbot reported NULL pointer deref with bfs lower layers
- Fix a copy up failure of large file from lower fuse fs
- Followup cleanup of backing_file API from Miklos
- Introduction and use of revert/override_creds_light() helpers, that
were suggested by Christian as a mitigation to cache line bouncing
and false sharing of fields in overlayfs creator_cred long lived
struct cred copy.
- Store up to two backing file references (upper and lower) in an
ovl_file container instead of storing a single backing file in
file->private_data.
This is used to avoid the practice of opening a short lived backing
file for the duration of some file operations and to avoid the
specialized use of FDPUT_FPUT in such occasions, that was getting in
the way of Al's fd_file() conversions.
* tag 'ovl-update-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: Filter invalid inodes with missing lookup function
ovl: convert ovl_real_fdget() callers to ovl_real_file()
ovl: convert ovl_real_fdget_path() callers to ovl_real_file_path()
ovl: store upper real file in ovl_file struct
ovl: allocate a container struct ovl_file for ovl private context
ovl: do not open non-data lower file for fsync
ovl: Optimize override/revert creds
ovl: pass an explicit reference of creators creds to callers
ovl: use wrapper ovl_revert_creds()
fs/backing-file: Convert to revert/override_creds_light()
cred: Add a light version of override/revert_creds()
backing-file: clean up the API
ovl: properly handle large files in ovl_security_fileattr
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
"sysctl ctl_table constification:
- Constifying ctl_table structs prevents the modification of
proc_handler function pointers. All ctl_table struct arguments are
const qualified in the sysctl API in such a way that the ctl_table
arrays being defined elsewhere and passed through sysctl can be
constified one-by-one.
We kick the constification off by qualifying user_table in
kernel/ucount.c and expect all the ctl_tables to be constified in
the coming releases.
Misc fixes:
- Adjust comments in two places to better reflect the code
- Remove superfluous dput calls
- Remove Luis from sysctl maintainership
- Replace comments about holding a lock with calls to
lockdep_assert_held"
* tag 'sysctl-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: Reduce dput(child) calls in proc_sys_fill_cache()
sysctl: Reorganize kerneldoc parameter names
ucounts: constify sysctl table user_table
sysctl: update comments to new registration APIs
MAINTAINERS: remove me from sysctl
sysctl: Convert locking comments to lockdep assertions
const_structs.checkpatch: add ctl_table
sysctl: make internal ctl_tables const
sysctl: allow registration of const struct ctl_table
sysctl: move internal interfaces to const struct ctl_table
bpf: Constify ctl_table argument of filter function
|
|
Pull rdma updates from Jason Gunthorpe:
"Seveal fixes scattered across the drivers and a few new features:
- Minor updates and bug fixes to hfi1, efa, iopob, bnxt, hns
- Force disassociate the userspace FD when hns does an async reset
- bnxt new features for optimized modify QP to skip certain stayes,
CQ coalescing, better debug dumping
- mlx5 new data placement ordering feature
- Faster destruction of mlx5 devx HW objects
- Improvements to RDMA CM mad handling"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (51 commits)
RDMA/bnxt_re: Correct the sequence of device suspend
RDMA/bnxt_re: Use the default mode of congestion control
RDMA/bnxt_re: Support different traffic class
IB/cm: Rework sending DREQ when destroying a cm_id
IB/cm: Do not hold reference on cm_id unless needed
IB/cm: Explicitly mark if a response MAD is a retransmission
RDMA/mlx5: Move events notifier registration to be after device registration
RDMA/bnxt_re: Cache MSIx info to a local structure
RDMA/bnxt_re: Refurbish CQ to NQ hash calculation
RDMA/bnxt_re: Refactor NQ allocation
RDMA/bnxt_re: Fail probe early when not enough MSI-x vectors are reserved
RDMA/hns: Fix different dgids mapping to the same dip_idx
RDMA/bnxt_re: Add set_func_resources support for P5/P7 adapters
RDMA/bnxt_re: Enhance RoCE SRIOV resource configuration design
bnxt_en: Add support for RoCE sriov configuration
RDMA/hns: Fix NULL pointer derefernce in hns_roce_map_mr_sg()
RDMA/hns: Fix out-of-order issue of requester when setting FENCE
RDMA/nldev: Add IB device and net device rename events
RDMA/mlx5: Add implementation for ufile_hw_cleanup device operation
RDMA/core: Move ib_uverbs_file struct to uverbs_types.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core Updates:
- Convert call-sites using iommu_domain_alloc() to more specific
versions and remove function
- Introduce iommu_paging_domain_alloc_flags()
- Extend support for allocating PASID-capable domains to more drivers
- Remove iommu_present()
- Some smaller improvements
New IOMMU driver for RISC-V
Intel VT-d Updates:
- Add domain_alloc_paging support
- Enable user space IOPFs in non-PASID and non-svm cases
- Small code refactoring and cleanups
- Add domain replacement support for pasid
AMD-Vi Updates:
- Adapt to iommu_paging_domain_alloc_flags() interface and alloc V2
page-tables by default
- Replace custom domain ID allocator with IDA allocator
- Add ops->release_domain() support
- Other improvements to device attach and domain allocation code
paths
ARM-SMMU Updates:
- SMMUv2:
- Return -EPROBE_DEFER for client devices probing before their
SMMU
- Devicetree binding updates for Qualcomm MMU-500 implementations
- SMMUv3:
- Minor fixes and cleanup for NVIDIA's virtual command queue
driver
- IO-PGTable:
- Fix indexing of concatenated PGDs and extend selftest coverage
- Remove unused block-splitting support
S390 IOMMU:
- Implement support for blocking domain
Mediatek IOMMU:
- Enable 35-bit physical address support for mt8186
OMAP IOMMU driver:
- Adapt to recent IOMMU core changes and unbreak driver"
* tag 'iommu-updates-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (92 commits)
iommu/tegra241-cmdqv: Fix alignment failure at max_n_shift
iommu: Make set_dev_pasid op support domain replacement
iommu/arm-smmu-v3: Make set_dev_pasid() op support replace
iommu/vt-d: Add set_dev_pasid callback for nested domain
iommu/vt-d: Make identity_domain_set_dev_pasid() to handle domain replacement
iommu/vt-d: Make intel_svm_set_dev_pasid() support domain replacement
iommu/vt-d: Limit intel_iommu_set_dev_pasid() for paging domain
iommu/vt-d: Make intel_iommu_set_dev_pasid() to handle domain replacement
iommu/vt-d: Add iommu_domain_did() to get did
iommu/vt-d: Consolidate the struct dev_pasid_info add/remove
iommu/vt-d: Add pasid replace helpers
iommu/vt-d: Refactor the pasid setup helpers
iommu/vt-d: Add a helper to flush cache for updating present pasid entry
iommu: Pass old domain to set_dev_pasid op
iommu/iova: Fix typo 'adderss'
iommu: Add a kdoc to iommu_unmap()
iommu/io-pgtable-arm-v7s: Remove split on unmap behavior
iommu/io-pgtable-arm: Remove split on unmap behavior
iommu/vt-d: Drain PRQs when domain removed from RID
iommu/vt-d: Drop pasid requirement for prq initialization
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These mostly are updates of cpufreq drivers used on ARM platforms plus
one new DT-based cpufreq driver for virtualized guests and two cpuidle
changes that should not make any difference on systems currently in
the field, but will be needed for future development:
- Add virtual cpufreq driver for guest kernels (David Dai)
- Minor cleanup to various cpufreq drivers (Andy Shevchenko, Dhruva
Gole, Jie Zhan, Jinjie Ruan, Shuosheng Huang, Sibi Sankar, and Yuan
Can)
- Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check"
(Colin Ian King)
- Improve DT bindings for qcom-hw driver (Dmitry Baryshkov, Konrad
Dybcio, and Nikunj Kela)
- Make cpuidle_play_dead() try all idle states with :enter_dead()
callbacks and change their return type to void (Rafael Wysocki)"
* tag 'pm-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits)
cpuidle: Change :enter_dead() driver callback return type to void
cpuidle: Do not return from cpuidle_play_dead() on callback failures
arm64: dts: qcom: sc8180x: Add a SoC-specific compatible to cpufreq-hw
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SC8180X compatible
cpufreq: sun50i: add a100 cpufreq support
cpufreq: mediatek-hw: Fix wrong return value in mtk_cpufreq_get_cpu_power()
cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_power()
cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_cost()
cpufreq: loongson3: Check for error code from devm_mutex_init() call
cpufreq: scmi: Fix cleanup path when boost enablement fails
cpufreq: CPPC: Fix possible null-ptr-deref for cppc_get_cpu_cost()
cpufreq: CPPC: Fix possible null-ptr-deref for cpufreq_cpu_get_raw()
Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check"
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SAR2130P compatible
cpufreq: add virtual-cpufreq driver
dt-bindings: cpufreq: add virtual cpufreq device
cpufreq: loongson2: Unregister platform_driver on failure
cpufreq: ti-cpufreq: Remove revision offsets in AM62 family
cpufreq: ti-cpufreq: Allow backward compatibility for efuse syscon
cppc_cpufreq: Remove HiSilicon CPPC workaround
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD device changes:
- switch platform_driver back to remove()
- misc fixes
SPI-NAND changes:
- a load of fixes to Winbond manufacturer driver
- structure constification
Raw NAND changes:
- improve the power management of the GPMI driver
- Davinci driver clean-ups
- fix leak in the Atmel driver
- fix some typos in the core
SPI NOR changes:
- Introduce byte swap support for 8D-8D-8D mode and a user for it:
macronix.
SPI NOR flashes may swap the bytes on a 16-bit boundary when
configured in Octal DTR mode. For such cases the byte order is
propagated through SPI MEM to the SPI controllers so that the
controllers swap the bytes back at runtime. This avoids breaking
the boot sequence because of the endianness problems that appear
when the bootloaders use 1-1-1 and the kernel uses 8D-8D-8D with
byte swap support. Along with the SPI MEM byte swap support we
queue a patch for the SPI MXIC controller that swaps the bytes back
at runtime"
* tag 'mtd/for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (25 commits)
mtd: spi-nor: core: replace dummy buswidth from addr to data
mtd: spi-nor: winbond: add "w/ and w/o SFDP" comment
mtd: spi-nor: spansion: Use nor->addr_nbytes in octal DTR mode in RD_ANY_REG_OP
mtd: Switch back to struct platform_driver::remove()
mtd: cfi_cmdset_0002: remove redundant assignment to variable ret
mtd: spinand: Constify struct nand_ecc_engine_ops
MAINTAINERS: add mailing list for GPMI NAND driver
mtd: spinand: winbond: Sort the devices
mtd: spinand: winbond: Ignore the last ID characters
mtd: spinand: winbond: Fix 512GW, 01GW, 01JW and 02JW ECC information
mtd: spinand: winbond: Fix 512GW and 02JW OOB layout
mtd: nand: raw: gpmi: improve power management handling
mtd: nand: raw: gpmi: switch to SYSTEM_SLEEP_PM_OPS
mtd: rawnand: davinci: use generic device property helpers
mtd: rawnand: davinci: break the line correctly
mtd: rawnand: davinci: order headers alphabetically
mtd: rawnand: atmel: Fix possible memory leak
mtd: rawnand: Correct multiple typos in comments
mtd: hyperbus: rpc-if: Add missing MODULE_DEVICE_TABLE
mtd: spi-nor: add support for Macronix Octal flash
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The core framework gained a clk provider helper, a clk consumer
helper, and some unit tests for the assigned clk rates feature in
DeviceTree. On the vendor driver side, we gained a whole pile of SoC
driver support detailed below. The majority in the diffstat is
Qualcomm, but there's also quite a few Samsung and Mediatek clk driver
additions in here as well. The top vendors is quite common, but the
sheer amount of new drivers is uncommon, so I'm anticipating a larger
number of fixes for clk drivers this cycle.
Core:
- devm_clk_bulk_get_all_enabled() to return number of clks acquired
- devm_clk_hw_register_gate_parent_hw() helper to modernize drivers
- KUnit tests for clk-assigned-rates{,-u64}
New Drivers:
- Marvell PXA1908 SoC clks
- Mobileye EyeQ5, EyeQ6L and EyeQ6H clk driver
- TWL6030 clk driver
- Nuvoton Arbel BMC NPCM8XX SoC clks
- MediaTek MT6735 SoC clks
- MediaTek MT7620, MT7628 and MT7688 MMC clks
- Add a driver for gated fixed rate clocks
- Global clock controllers for Qualcomm QCS8300 and IPQ5424 SoCs
- Camera, display and video clock controllers for Qualcomm SA8775P
SoCs
- Global, display, GPU, TCSR, and RPMh clock controllers for Qualcomm
SAR2130P
- Global, camera, display, GPU, and video clock controllers for
Qualcomm SM8475 SoCs
- RTC power domain and Battery Backup Function (VBATTB) clock support
for the Renesas RZ/G3S SoC
- Qualcomm IPQ9574 alpha PLLs
- Support for i.MX91 CCM in the i.MX93 driver
- Microchip LAN969X SoC clks
- Cortex-A55 core clocks and Interrupt Control Unit (ICU) clock and
reset on Renesas RZ/V2H(P)
- Samsung ExynosAutov920 clk drivers for PERIC1, MISC, HSI0 and HSI1
- Samsung Exynos8895 clk drivers for FSYS0/1, PERIC0/1, PERIS and TOP
Updates:
- Convert more clk bindings to YAML
- Various clk driver cleanups: NULL checks, add const, etc.
- Remove END/NUM #defines that count number of clks in various
binding headers
- Continue moving reset drivers to drivers/reset via auxiliary bus"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (162 commits)
clk: clk-loongson2: Fix potential buffer overflow in flexible-array member access
clk: Fix invalid execution of clk_set_rate
clk: clk-loongson2: Fix memory corruption bug in struct loongson2_clk_provider
clk: lan966x: make it selectable for ARCH_LAN969X
clk: eyeq: add EyeQ6H west fixed factor clocks
clk: eyeq: add EyeQ6H central fixed factor clocks
clk: eyeq: add EyeQ5 fixed factor clocks
clk: eyeq: add fixed factor clocks infrastructure
clk: eyeq: require clock index with phandle in all cases
clk: fixed-factor: add clk_hw_register_fixed_factor_index() function
dt-bindings: clock: eyeq: add more Mobileye EyeQ5/EyeQ6H clocks
dt-bindings: soc: mobileye: set `#clock-cells = <1>` for all compatibles
clk: clk-axi-clkgen: make sure to enable the AXI bus clock
dt-bindings: clock: axi-clkgen: include AXI clk
clk: mmp: Add Marvell PXA1908 MPMU driver
clk: mmp: Add Marvell PXA1908 APMU driver
clk: mmp: Add Marvell PXA1908 APBCP driver
clk: mmp: Add Marvell PXA1908 APBC driver
dt-bindings: clock: Add Marvell PXA1908 clock bindings
clk: mmp: Switch to use struct u32_fract instead of custom one
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
- Improve handling of LCD power states and interactions with the fbdev
subsystem
- Introduce new LCD_POWER_ constants to decouple the LCD subsystem from
fbdev
- Update several drivers to use the new LCD_POWER_ constants
- Clarify the semantics of the lcd_ops.controls_device callback
- Remove unnecessary includes and dependencies
- Remove unused notifier functionality
- Simplify code with scoped for-each loops
- Fix module autoloading for the ktz8866 driver
- Update device tree bindings to yaml format
- Minor cleanups and improvements in various drivers
* tag 'backlight-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (33 commits)
MAINTAINERS: Use Daniel Thompson's korg address for Backlight work
dt-bindings: backlight: Convert zii,rave-sp-backlight.txt to yaml
backlight: Remove notifier
backlight: ktz8866: Fix module autoloading
backlight: 88pm860x_bl: Simplify with scoped for each OF child loop
backlight: lcd: Do not include <linux/fb.h> in lcd header
backlight: lcd: Remove struct fb_videomode from set_mode callback
backlight: lcd: Replace check_fb with controls_device
HID: picoLCD: Replace check_fb in favor of struct fb_info.lcd_dev
fbdev: omap: Use lcd power constants
fbdev: imxfb: Use lcd power constants
fbdev: imxfb: Replace check_fb in favor of struct fb_info.lcd_dev
fbdev: clps711x-fb: Use lcd power constants
fbdev: clps711x-fb: Replace check_fb in favor of struct fb_info.lcd_dev
backlight: tdo24m: Use lcd power constants
backlight: platform_lcd: Use lcd power constants
backlight: platform_lcd: Remove match_fb from struct plat_lcd_data
backlight: platform_lcd: Remove include statement for <linux/backlight.h>
backlight: otm3225a: Use lcd power constants
backlight: ltv350qv: Use lcd power constants
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
PULL LED updates from Lee Jones:
- Remove unused local header files from various drivers
- Revert platform driver removal to the original method for consistency
- Introduce ordered workqueues for LED events, replacing the less
efficient system_wq
- Switch to a safer iteration macro in several drivers to prevent
potential memory leaks
- Fix a refcounting bug in the mt6360 flash LED driver
- Fix an uninitialized variable in the mt6370_mc_pattern_clear()
function
- Resolve Smatch warnings in the leds-bcm6328 driver
- Address a potential NULL pointer dereference in the brightness_show()
function
- Fix an incorrect format specifier in the ss4200 driver
- Prevent a resource leak in the max5970 driver's probe function
- Add support for specifying the number of serial shift bits in the
device tree for the BCM63138 family
- Implement multicolor brightness control in the lp5562 driver
- Add a device tree property to override the default LED pin polarity
- Add a property to specify the default brightness value when the LED
is initially on
- Set missing timing properties for the ktd2692 driver
- Document the "rc-feedback" trigger for controlling LEDs based on
remote control activity
- Convert text bindings to YAML for the pca955x driver to enable device
tree validation
- Remove redundant checks for invalid channel numbers in the lp55xx
driver
- Update the MAINTAINERS file with current contact information
* tag 'leds-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (46 commits)
leds: ss4200: Fix the wrong format specifier for 'blinking'
leds: pwm: Add optional DT property default-brightness
dt-bindings: leds: pwm: Add default-brightness property
leds: class: Protect brightness_show() with led_cdev->led_access mutex
leds: ktd2692: Set missing timing properties
leds: max5970: Fix unreleased fwnode_handle in probe function
leds: Introduce ordered workqueue for LEDs events instead of system_wq
MAINTAINERS: Replace Siemens IPC related bouncing maintainers
leds: bcm6328: Replace divide condition with comparison for shift value
leds: lp55xx: Remove redundant test for invalid channel number
dt-bindings: leds: pca955x: Convert text bindings to YAML
leds: rgb: leds-mt6370-rgb: Fix uninitialized variable 'ret' in mt6370_mc_pattern_clear
leds: lp5562: Add multicolor brightness control
dt-bindings: leds: Add 'active-high' property
leds: Switch back to struct platform_driver::remove()
leds: bcm63138: Add some register defines
leds: bcm63138: Handle shift register config
leds: bcm63138: Use scopes and guards
dt-bindings: leds: bcm63138: Add shift register bits
leds: leds-gpio-register: Reorganize kerneldoc parameter names
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
- Several drivers, including atmel-flexcom/rk8xx-core, palmas, and
tps65010, have undergone minor code improvements to enhance
consistency and fix race conditions.
- The syscon driver now utilizes the regmap max_register_is_0
capability for consistent register map configuration across syscons
of all sizes.
- New device support has been added for QCS8300, qcs615, SA8255p, and
samsung,s2dos05, expanding the range of compatible hardware.
- The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
and avoids loading the charger with UCSI, streamlining functionality.
- The bd96801 driver now utilizes the more modern maple tree register
cache, improving performance.
- The da9052-spi driver has undergone a fix to change the read-mask to
write-mask, preventing potential issues.
- Unused declarations in max77693 have been removed, and support for
samsung,s2dos05 has been added, enhancing code clarity and device
compatibility.
- Error handling in cs42l43 has been fixed to avoid unbalanced
regulator put and ensure proper synchronization during driver
removal.
- The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
MODULE_ALIAS(), improving code consistency.
- Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
and reorganized for better clarity and maintainability.
- The intel_soc_pmic_bxtwc driver has undergone significant
improvements, including the use of IRQ domains for various devices,
fixing IRQ domain names duplication, and code refactoring for better
consistency and maintainability.
- The ipaq-micro driver has received a fix for a missing break
statement in the default case, enhancing code robustness.
- Support for the AXP323 PMIC has been added to the axp20x driver,
along with ensuring a clear relationship between IDs and model names,
and allowing multiple regulators, broadening hardware compatibility.
- The cs42l43 driver now disables IRQs during suspend for improved
power management.
- The adp5585 driver has reduced its dependencies by dropping the
obsolete dependency on COMPILE_TEST.
- Initial support for the MT6328 PMIC has been added to the mt6397
driver, expanding the range of supported hardware.
- The rtc-bd70528 driver has been simplified by dropping the IC name
from IRQ, improving code readability.
- Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
updated to enhance clarity and incorporate new features.
- The rt5033 driver has received a fix for a missing
regmap_del_irq_chip() in the error handling path.
- New device support has been added for MSM8917, and the
intel_soc_pmic_crc driver now supports non-ACPI instantiated
i2c_client.
- The 88pm886 driver has added support for the RTC cell, and the tqmx86
driver has improved its GPIO IRQ setup and added I2C IRQ support,
increasing functionality.
- The sprd,sc2731 DT schema has been updated and converted to YAML
format for better readability and maintainability.
* tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (62 commits)
dt-bindings: mfd: bd71828: Use charger resistor in mOhm instead of MOhm
dt-bindings: mfd: sprd,sc2731: Convert to YAML
mfd: tqmx86: Add I2C IRQ support
mfd: tqmx86: Make IRQ setup errors non-fatal
mfd: tqmx86: Refactor GPIO IRQ setup
mfd: tqmx86: Improve gpio_irq module parameter description
mfd: tqmx86: Add board definitions for TQMx120UC, TQMx130UC and TQMxE41S
mfd: 88pm886: Add the RTC cell
dt-bindings: mfd: Add Realtek RTL9300 switch peripherals
mfd: intel_soc_pmic_crc: Add support for non ACPI instantiated i2c_client
mfd: intel_soc_pmic_*: Consistently use filename as driver name
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8917
mfd: rt5033: Fix missing regmap_del_irq_chip()
mfd: cgbc-core: Fix error handling paths in cgbc_init_device()
dt-bindings: mfd: aspeed: Support for AST2700
mfd: Switch back to struct platform_driver::remove()
dt-bindings: mfd: qcom,spmi-pmic: Document PMICs added in SM8750
mfd: rtc: bd7xxxx Drop IC name from IRQ
mfd: mt6397: Add initial support for MT6328
mfd: adp5585: Drop obsolete dependency on COMPILE_TEST
...
|
|
The scheduler added NEED_RESCHED_LAZY scheduling. Record this state as
part of trace flags and expose it in the need_resched field.
Record and expose NEED_RESCHED_LAZY.
[bigeasy: Commit description, documentation bits.]
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241122202849.7DfYpJR0@linutronix.de
Reviewed-by: Ankur Arora <ankur.a.arora@oracle.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Addition of faultable tracepoints
There's a tracepoint attached to both a system call entry and exit.
This location is known to allow page faults. The tracepoints are
called under an rcu_read_lock() which does not allow faults that can
sleep. This limits the ability of tracepoint handlers to page fault
in user space system call parameters. Now these tracepoints have been
made "faultable", allowing the callbacks to fault in user space
parameters and record them.
Note, only the infrastructure has been implemented. The consumers
(perf, ftrace, BPF) now need to have their code modified to allow
faults.
- Fix up of BPF code for the tracepoint faultable logic
- Update tracepoints to use the new static branch API
- Remove trace_*_rcuidle() variants and the SRCU protection they used
- Remove unused TRACE_EVENT_FL_FILTERED logic
- Replace strncpy() with strscpy() and memcpy()
- Use replace per_cpu_ptr(smp_processor_id()) with this_cpu_ptr()
- Fix perf events to not duplicate samples when tracing is enabled
- Replace atomic64_add_return(1, counter) with
atomic64_inc_return(counter)
- Make stack trace buffer 4K instead of PAGE_SIZE
- Remove TRACE_FLAG_IRQS_NOSUPPORT flag as it was never used
- Get the true return address for function tracer when function graph
tracer is also running.
When function_graph trace is running along with function tracer, the
parent function of the function tracer sometimes is
"return_to_handler", which is the function graph trampoline to record
the exit of the function. Use existing logic that calls into the
fgraph infrastructure to find the real return address.
- Remove (un)regfunc pointers out of tracepoint structure
- Added last minute bug fix for setting pending modules in stack
function filter.
echo "write*:mod:ext3" > /sys/kernel/tracing/stack_trace_filter
Would cause a kernel NULL dereference.
- Minor clean ups
* tag 'trace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (31 commits)
ftrace: Fix regression with module command in stack_trace_filter
tracing: Fix function name for trampoline
ftrace: Get the true parent ip for function tracer
tracing: Remove redundant check on field->field in histograms
bpf: ensure RCU Tasks Trace GP for sleepable raw tracepoint BPF links
bpf: decouple BPF link/attach hook and BPF program sleepable semantics
bpf: put bpf_link's program when link is safe to be deallocated
tracing: Replace strncpy() with strscpy() when copying comm
tracing: Add might_fault() check in __DECLARE_TRACE_SYSCALL
tracing: Fix syscall tracepoint use-after-free
tracing: Introduce tracepoint_is_faultable()
tracing: Introduce tracepoint extended structure
tracing: Remove TRACE_FLAG_IRQS_NOSUPPORT
tracing: Replace multiple deprecated strncpy with memcpy
tracing: Make percpu stack trace buffer invariant to PAGE_SIZE
tracing: Use atomic64_inc_return() in trace_clock_counter()
trace/trace_event_perf: remove duplicate samples on the first tracepoint event
tracing/bpf: Add might_fault check to syscall probes
tracing/perf: Add might_fault check to syscall probes
tracing/ftrace: Add might_fault check to syscall probes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dave Jiang:
- Constify range_contains() input parameters to prevent changes
- Add support for displaying RCD capabilities in sysfs to support lspci
for CXL device
- Downgrade warning message to debug in cxl_probe_component_regs()
- Add support for adding a printf specifier '%pra' to emit 'struct
range' content:
- Add sanity tests for 'struct resource'
- Add documentation for special case
- Add %pra for 'struct range'
- Add %pra usage in CXL code
- Add preparation code for DCD support:
- Add range_overlaps()
- Add CDAT DSMAS table shared and read only flag in ACPICA
- Add documentation to 'struct dev_dax_range'
- Delay event buffer allocation in CXL PCI code until needed
- Use guard() in cxl_dpa_set_mode()
- Refactor create region code to consolidate common code
* tag 'cxl-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region: Refactor common create region code
cxl/hdm: Use guard() in cxl_dpa_set_mode()
cxl/pci: Delay event buffer allocation
dax: Document struct dev_dax_range
ACPI/CDAT: Add CDAT/DSMAS shared and read only flag values
range: Add range_overlaps()
cxl/cdat: Use %pra for dpa range outputs
printf: Add print format (%pra) for struct range
Documentation/printf: struct resource add start == end special case
test printf: Add very basic struct resource tests
cxl: downgrade a warning message to debug level in cxl_probe_component_regs()
cxl/pci: Add sysfs attribute for CXL 1.1 device link status
cxl/core/regs: Add rcd_pcie_cap initialization
kernel/range: Const-ify range_contains parameters
|
|
To avoid arch-specific code in general ACPI initialization flow,
introduce a weak symbol acpi_arch_init().
Currently, arm64 and riscv can utillize this to insert their
arch-specific flow.
In the future, other architectures can also have a chance to define
their own arch-specific ACPI initialization process if necessary.
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Miao Wang <shankerwangmiao@gmail.com>
Link: https://patch.msgid.link/20241121-intro-acpi-arch-init-v4-1-b1fb517e7d8b@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge additional cpuidle changes for 6.13-rc1:
- Make cpuidle_play_dead() try all idle states with :enter_dead()
callbacks and change their return type to void (Rafael Wysocki).
* pm-cpuidle:
cpuidle: Change :enter_dead() driver callback return type to void
cpuidle: Do not return from cpuidle_play_dead() on callback failures
|
|
Now that the main domain allocating path is calling this function it
doesn't make sense to leave it named _user. Change the name to
alloc_paging_flags() to mirror the new iommu_paging_domain_alloc_flags()
function.
A driver should implement only one of ops->domain_alloc_paging() or
ops->domain_alloc_paging_flags(). The former is a simpler interface with
less boiler plate that the majority of drivers use. The latter is for
drivers with a greater feature set (PASID, multiple page table support,
advanced iommufd support, nesting, etc). Additional patches will be needed
to achieve this.
Link: https://patch.msgid.link/r/2-v1-c252ebdeb57b+329-iommu_paging_flags_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
It turns out all the drivers that are using this immediately call into
another function, so just make that function directly into the op. This
makes paging=NULL for domain_alloc_user and we can remove the argument in
the next patch.
The function mirrors the similar op in the viommu that allocates a nested
domain on top of the viommu's nesting parent. This version supports cases
where a viommu is not being used.
Link: https://patch.msgid.link/r/1-v1-c252ebdeb57b+329-iommu_paging_flags_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/iommu/linux into iommufd.git
Merge with Joerg's tree for dependencies on the next patches.
======================================
IOMMU Updates for Linux v6.13:
Including:
- Core Updates:
- Convert call-sites using iommu_domain_alloc() to more specific
versions and remove function.
- Introduce iommu_paging_domain_alloc_flags().
- Extend support for allocating PASID-capable domains to more
drivers.
- Remove iommu_present().
- Some smaller improvements.
- New IOMMU driver for RISC-V.
- Intel VT-d Updates:
- Add domain_alloc_paging support.
- Enable user space IOPFs in non-PASID and non-svm cases.
- Small code refactoring and cleanups.
- Add domain replacement support for pasid.
- AMD-Vi Updates:
- Adapt to iommu_paging_domain_alloc_flags() interface and alloc V2
page-tables by default.
- Replace custom domain ID allocator with IDA allocator.
- Add ops->release_domain() support.
- Other improvements to device attach and domain allocation code
paths.
- ARM-SMMU Updates:
- SMMUv2:
- Return -EPROBE_DEFER for client devices probing before their SMMU.
- Devicetree binding updates for Qualcomm MMU-500 implementations.
- SMMUv3:
- Minor fixes and cleanup for NVIDIA's virtual command queue driver.
- IO-PGTable:
- Fix indexing of concatenated PGDs and extend selftest coverage.
- Remove unused block-splitting support.
- S390 IOMMU:
- Implement support for blocking domain.
- Mediatek IOMMU:
- Enable 35-bit physical address support for mt8186.
- OMAP IOMMU driver:
- Adapt to recent IOMMU core changes and unbreak driver.
======================================
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
