summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2014-01-29Merge branches 'acpi-processor', 'acpi-hotplug', 'acpi-init', 'acpi-pm' and ↵Rafael J. Wysocki
'acpica' * acpi-processor: ACPI / scan: reduce log level of "ACPI: \_PR_.CPU4: failed to get CPU APIC ID" ACPI / processor: Return specific error value when mapping lapic id * acpi-hotplug: ACPI / scan: Clear match_driver flag in acpi_bus_trim() * acpi-init: ACPI / init: Flag use of ACPI and ACPI idioms for power supplies to regulator API * acpi-pm: ACPI / PM: Use ACPI_COMPANION() to get ACPI companions of devices * acpica: ACPICA: Remove bool usage from ACPICA.
2014-01-29Merge remote-tracking branch 'agust/next' into nextBenjamin Herrenschmidt
<< Switch mpc512x to the common clock framework and adapt mpc512x drivers to use the new clock driver. Old PPC_CLOCK code is removed entirely since there are no users any more. >>
2014-01-28Merge tag 'for-linus-20140127' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: - Add me (Brian Norris) as an additional MTD maintainer (it'd be nice to get David's "ack" for this; I'm sure he approves, but he's been pretty silent lately) - Add Ezequiel Garcie as maintainer for the pxa3xx NAND driver - Last (?) round of pxa3xx improvements for supporting Armada 370/XP - Typical churn in driver boilerplate (OOM messages, printk()'s, devm_*, etc.) - Quad read mode support for SPI NOR driver (m25p80) - Update Davinci NAND driver to prepare for use on new platforms - Begin to kill off NAND_MAX_{PAGE,OOB}SIZE macros; more work is pending - Miscellaneous NAND device support (new IDs) - Add READ RETRY support for Micron MLC NAND - Support new GPMI NAND ECC layout device-tree binding - Avoid mapping stack/vmalloc() memory for GPMI NAND DMA * tag 'for-linus-20140127' of git://git.infradead.org/linux-mtd: (151 commits) mtd: gpmi: add sanity check when mapping DMA for read_buf/write_buf mtd: gpmi: allocate a proper buffer for non ECC read/write mtd: m25p80: Set rx_nbits for Quad SPI transfers mtd: m25p80: Enable Quad SPI read transfers for s25fl512s mtd: s3c2410: Merge plat/regs-nand.h into s3c2410.c mtd: mtdram: add missing 'const' mtd: m25p80: assign default read command mtd: nuc900_nand: remove redundant return value check of platform_get_resource() mtd: plat_nand: remove redundant return value check of platform_get_resource() mtd: nand: add Intel manufacturer ID mtd: nand: add SanDisk manufacturer ID mtd: nand: add support for Samsung K9LCG08U0B mtd: nand: pxa3xx: Add support for 2048 bytes page size devices mtd: m25p80: Use OPCODE_QUAD_READ_4B for 4-byte addressing mtd: nand: don't use {read,write}_buf for 8-bit transfers mtd: nand: use __packed shorthand mtd: nand: support Micron READ RETRY mtd: nand: add generic READ RETRY support mtd: nand: add ONFI vendor block for Micron mtd: nand: localize ECC failures per page ...
2014-01-28Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED subsystem update from Bryan Wu: "Basically this cycle is mostly cleanup for LED subsystem" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: s3c24xx: Remove hardware.h inclusion leds: replace list_for_each with list_for_each_entry leds: kirkwood: Cleanup in header files leds: pwm: Remove a warning on non-DT platforms leds: leds-pwm: fix duty time overflow. leds: leds-mc13783: Remove unneeded mc13xxx_{un}lock leds: leds-mc13783: Remove duplicate field in platform data drivers: leds: leds-tca6507: check CONFIG_GPIOLIB whether defined for 'gpio_base' leds: lp5523: Support LED MUX configuration on running a pattern leds: lp5521/5523: Fix multiple engine usage bug LEDS: tca6507 - fix up some comments. LEDS: tca6507: add device-tree support for GPIO configuration. LEDS: tca6507 - fix bugs in parsing of device-tree configuration.
2014-01-28Merge tag 'clk-for-linus-3.14-part2' of ↵Linus Torvalds
git://git.linaro.org/people/mike.turquette/linux Pull more clock framework changes from Mike Turquette: "The second half of the clock framework pull requeust for 3.14 is dominated by platform support for Qualcomm's MSM SoCs, DT binding updates for TI's OMAP-ish processors and additional support for Samsung chips. Additionally there are other smaller clock driver changes and several last minute fixes. This pull request also includes the HiSilicon support that depends on the already-merged arm-soc pull request" [ Fix up stupid compile error in the source tree with evil merge - Grumpy Linus ] * tag 'clk-for-linus-3.14-part2' of git://git.linaro.org/people/mike.turquette/linux: (49 commits) clk: sort Makefile clk: sunxi: fix overflow when setting up divided factors clk: Export more clk-provider functions dt-bindings: qcom: Fix warning with duplicate dt define clk: si5351: remove variant from platform_data clk: samsung: Remove unneeded semicolon clk: qcom: Fix modular build ARM: OMAP3: use DT clock init if DT data is available ARM: AM33xx: remove old clock data and link in new clock init code ARM: AM43xx: Enable clock init ARM: OMAP: DRA7: Enable clock init ARM: OMAP4: remove old clock data and link in new clock init code ARM: OMAP2+: io: use new clock init API ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT ARM: OMAP3: hwmod: initialize clkdm from clkdm_name ARM: OMAP: hwmod: fix an incorrect clk type cast with _get_clkdm ARM: OMAP2+: clock: use driver API instead of direct memory read/write ARM: OMAP2+: clock: add support for indexed memmaps ARM: dts: am43xx clock data ARM: dts: AM35xx: use DT clock data ...
2014-01-29Merge tag 'drm/for-3.14-rc1-20140123' of ↵Dave Airlie
git://anongit.freedesktop.org/tegra/linux into drm-next drm/tegra: Changes for v3.14-rc1 (update) These patches fix some issues caused by the DRM panel support from the previous pull request and add two more panels (for the Toshiba AC100 as well as the Seaboard and Ventana). * tag 'drm/for-3.14-rc1-20140123' of git://anongit.freedesktop.org/tegra/linux: drm/tegra: Obtain head number from DT drm/panel: update EDID BLOB in panel_simple_get_modes() gpu: host1x: Remove unnecessary include drm/tegra: Use proper data type drm/tegra: Clarify how panel modes override others drm/tegra: Fix possible CRTC mask for RGB outputs drm/i915: Use drm_encoder_crtc_ok() drm: Move drm_encoder_crtc_ok() to core drm: provide a helper for the encoder possible_crtcs mask drm/tegra: Don't check resource with devm_ioremap_resource() drm/panel: Add support for Chunghwa CLAA101WA01A panel drm/panel: Add support for Samsung LTN101NT05 panel
2014-01-29Merge tag 'drm-intel-fixes-2014-01-28' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-next Pile of -fixes all over the place. Lot's of cc: stable. Only big thing is that we've dropped the preliminary hw support tag for bdw - it seems to work. Which also means that I'll shovel a few more bdw patches through -fixes, there's 5 w/a patches from Ken already on intel-gfx. * tag 'drm-intel-fixes-2014-01-28' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Fix the offset issue for the stolen GEM objects drm/i915: Decouple GPU error reporting from ring initialisation i915: remove pm_qos request on error Revert "drm/i915: Mask reserved bits in display/sprite address registers" drm/i915: VLV2 - Fix hotplug detect bits drm/i915: Allow reading the TIMESTAMP register on Gen8. drm/i915: Repeat evictions whilst pageflip completions are outstanding drm/i915: Wait for completion of pending flips when starved of fences drm/i915: don't disable DP port after a failed link training drm/i915: don't disable the DP port if the link is lost drm/i915: Eliminate lots of WARNs when there's no backlight present drm/i915: g4x/vlv: fix dp aux interrupt mask drm/i915/ppgtt: Defer request freeing on reset i915: send D1 opregion notification drm/i915/bdw: remove preliminary_hw_support flag from BDW drm/i915: Tune down reset_stat output from ERROR to debug drm/i915: Make semaphore modparam RO drm/i915: Fix disabled semaphores drm/i915: Clarify relocation errnos drm/i915: Spelling s/auxilliary/auxiliary/
2014-01-29Merge branch 'drm-armada-fixes' of ↵Dave Airlie
git://ftp.arm.linux.org.uk/~rmk/linux-cubox into drm-next Just one-liner which corrects a select statement for DRM_KMS_FB_HELPER which looks like it was missed in the initial merge. Based on 3.13. * 'drm-armada-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox: (55 commits) DRM: armada: fix missing DRM_KMS_FB_HELPER select
2014-01-28Btrfs: add support for inode propertiesFilipe David Borba Manana
This change adds infrastructure to allow for generic properties for inodes. Properties are name/value pairs that can be associated with inodes for different purposes. They are stored as xattrs with the prefix "btrfs." Properties can be inherited - this means when a directory inode has inheritable properties set, these are added to new inodes created under that directory. Further, subvolumes can also have properties associated with them, and they can be inherited from their parent subvolume. Naturally, directory properties have priority over subvolume properties (in practice a subvolume property is just a regular property associated with the root inode, objectid 256, of the subvolume's fs tree). This change also adds one specific property implementation, named "compression", whose values can be "lzo" or "zlib" and it's an inheritable property. The corresponding changes to btrfs-progs were also implemented. A patch with xfstests for this feature will follow once there's agreement on this change/feature. Further, the script at the bottom of this commit message was used to do some benchmarks to measure any performance penalties of this feature. Basically the tests correspond to: Test 1 - create a filesystem and mount it with compress-force=lzo, then sequentially create N files of 64Kb each, measure how long it took to create the files, unmount the filesystem, mount the filesystem and perform an 'ls -lha' against the test directory holding the N files, and report the time the command took. Test 2 - create a filesystem and don't use any compression option when mounting it - instead set the compression property of the subvolume's root to 'lzo'. Then create N files of 64Kb, and report the time it took. The unmount the filesystem, mount it again and perform an 'ls -lha' like in the former test. This means every single file ends up with a property (xattr) associated to it. Test 3 - same as test 2, but uses 4 properties - 3 are duplicates of the compression property, have no real effect other than adding more work when inheriting properties and taking more btree leaf space. Test 4 - same as test 3 but with 10 properties per file. Results (in seconds, and averages of 5 runs each), for different N numbers of files follow. * Without properties (test 1) file creation time ls -lha time 10 000 files 3.49 0.76 100 000 files 47.19 8.37 1 000 000 files 518.51 107.06 * With 1 property (compression property set to lzo - test 2) file creation time ls -lha time 10 000 files 3.63 0.93 100 000 files 48.56 9.74 1 000 000 files 537.72 125.11 * With 4 properties (test 3) file creation time ls -lha time 10 000 files 3.94 1.20 100 000 files 52.14 11.48 1 000 000 files 572.70 142.13 * With 10 properties (test 4) file creation time ls -lha time 10 000 files 4.61 1.35 100 000 files 58.86 13.83 1 000 000 files 656.01 177.61 The increased latencies with properties are essencialy because of: *) When creating an inode, we now synchronously write 1 more item (an xattr item) for each property inherited from the parent dir (or subvolume). This could be done in an asynchronous way such as we do for dir intex items (delayed-inode.c), which could help reduce the file creation latency; *) With properties, we now have larger fs trees. For this particular test each xattr item uses 75 bytes of leaf space in the fs tree. This could be less by using a new item for xattr items, instead of the current btrfs_dir_item, since we could cut the 'location' and 'type' fields (saving 18 bytes) and maybe 'transid' too (saving a total of 26 bytes per xattr item) from the btrfs_dir_item type. Also tried batching the xattr insertions (ignoring proper hash collision handling, since it didn't exist) when creating files that inherit properties from their parent inode/subvolume, but the end results were (surprisingly) essentially the same. Test script: $ cat test.pl #!/usr/bin/perl -w use strict; use Time::HiRes qw(time); use constant NUM_FILES => 10_000; use constant FILE_SIZES => (64 * 1024); use constant DEV => '/dev/sdb4'; use constant MNT_POINT => '/home/fdmanana/btrfs-tests/dev'; use constant TEST_DIR => (MNT_POINT . '/testdir'); system("mkfs.btrfs", "-l", "16384", "-f", DEV) == 0 or die "mkfs.btrfs failed!"; # following line for testing without properties #system("mount", "-o", "compress-force=lzo", DEV, MNT_POINT) == 0 or die "mount failed!"; # following 2 lines for testing with properties system("mount", DEV, MNT_POINT) == 0 or die "mount failed!"; system("btrfs", "prop", "set", MNT_POINT, "compression", "lzo") == 0 or die "set prop failed!"; system("mkdir", TEST_DIR) == 0 or die "mkdir failed!"; my ($t1, $t2); $t1 = time(); for (my $i = 1; $i <= NUM_FILES; $i++) { my $p = TEST_DIR . '/file_' . $i; open(my $f, '>', $p) or die "Error opening file!"; $f->autoflush(1); for (my $j = 0; $j < FILE_SIZES; $j += 4096) { print $f ('A' x 4096) or die "Error writing to file!"; } close($f); } $t2 = time(); print "Time to create " . NUM_FILES . ": " . ($t2 - $t1) . " seconds.\n"; system("umount", DEV) == 0 or die "umount failed!"; system("mount", DEV, MNT_POINT) == 0 or die "mount failed!"; $t1 = time(); system("bash -c 'ls -lha " . TEST_DIR . " > /dev/null'") == 0 or die "ls failed!"; $t2 = time(); print "Time to ls -lha all files: " . ($t2 - $t1) . " seconds.\n"; system("umount", DEV) == 0 or die "umount failed!"; Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28rwsem: add rwsem_is_contendedJosef Bacik
Btrfs needs a simple way to know if it needs to let go of it's read lock on a rwsem. Introduce rwsem_is_contended to check to see if there are any waiters on this rwsem currently. This is just a hueristic, it is meant to be light and not 100% accurate and called by somebody already holding on to the rwsem in either read or write. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <clm@fb.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2014-01-28Btrfs/tracepoint: update new flags for ordered extent TPLiu Bo
Flag BTRFS_ORDERED_TRUNCATED is a new one, update the tracepoint to support it. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28Btrfs/tracepoint: fix to report right flags for ordered extentLiu Bo
We use set_bit() to assign ordered extent's flags, but in the related tracepoint we don't do the same thing, which makes the trace output not to parse flags correctly. Also, since the flags are bits stuff, we change to use __print_flags with a 'delim' instead of __print_symbolic. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28btrfs: add ioctl to export size of global metadata reservationJeff Mahoney
btrfs filesystem df output will show the size of the metadata space and how much of it is used, and the user assumes that the difference is all usable space. Since that's not actually the case due to the global metadata reservation, we should provide the full picture to the user. This patch adds an ioctl that exports the size of the global metadata reservation so that btrfs filesystem df can report it. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28btrfs: add ioctls to query/change feature bits onlineJeff Mahoney
There are some feature bits that require no offline setup and can be enabled online. I've only reviewed extended irefs, but there will probably be more. We introduce three new ioctls: - BTRFS_IOC_GET_SUPPORTED_FEATURES: query the kernel for supported features. - BTRFS_IOC_GET_FEATURES: query the kernel for enabled features on a per-fs basis, as well as querying for which features are changeable with mounted. - BTRFS_IOC_SET_FEATURES: change features on a per-fs basis. We introduce two new masks per feature set (_SAFE_SET and _SAFE_CLEAR) that allow us to define which features are safe to change at runtime. The failure modes for BTRFS_IOC_SET_FEATURES are as follows: - Enabling a completely unsupported feature: warns and returns -ENOTSUPP - Enabling a feature that can only be done offline: warns and returns -EPERM Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull ceph updates from Sage Weil: "This is a big batch. From Ilya we have: - rbd support for more than ~250 mapped devices (now uses same scheme that SCSI does for device major/minor numbering) - crush updates for new mapping behaviors (will be needed for coming erasure coding support, among other things) - preliminary support for tiered storage pools There is also a big series fixing a pile cephfs bugs with clustered MDSs from Yan Zheng, ACL support for cephfs from Guangliang Zhao, ceph fscache improvements from Li Wang, improved behavior when we get ENOSPC from Josh Durgin, some readv/writev improvements from Majianpeng, and the usual mix of small cleanups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (76 commits) ceph: cast PAGE_SIZE to size_t in ceph_sync_write() ceph: fix dout() compile warnings in ceph_filemap_fault() libceph: support CEPH_FEATURE_OSD_CACHEPOOL feature libceph: follow redirect replies from osds libceph: rename ceph_osd_request::r_{oloc,oid} to r_base_{oloc,oid} libceph: follow {read,write}_tier fields on osd request submission libceph: add ceph_pg_pool_by_id() libceph: CEPH_OSD_FLAG_* enum update libceph: replace ceph_calc_ceph_pg() with ceph_oloc_oid_to_pg() libceph: introduce and start using oid abstraction libceph: rename MAX_OBJ_NAME_SIZE to CEPH_MAX_OID_NAME_LEN libceph: move ceph_file_layout helpers to ceph_fs.h libceph: start using oloc abstraction libceph: dout() is missing a newline libceph: add ceph_kv{malloc,free}() and switch to them libceph: support CEPH_FEATURE_EXPORT_PEER ceph: add imported caps when handling cap export message ceph: add open export target session helper ceph: remove exported caps when handling cap import message ceph: handle session flush message ...
2014-01-28Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osdLinus Torvalds
Pull exofs and ore fixes from Boaz Harrosh: "The main fix here, the first patch, is also destined for -stable. The rest is small trivia and cosmetics. The ORE patches effect both exofs and pnfs-objects very reproducible bugs" [ ORE is "object raid engine", used by exofs and pnfs - Linus ] * 'for-linus' of git://git.open-osd.org/linux-open-osd: exofs: Print less in r4w exofs: Allow corrupted directory entry to be empty file exofs: Allow O_DIRECT open ore: Don't crash on NULL bio in _clear_bio ore: Fix wrong math in allocation of per device BIO
2014-01-28Merge tag 'nfs-for-3.14-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client updates from Trond Myklebust: "Highlights include: - stable fix for an infinite loop in RPC state machine - stable fix for a use after free situation in the NFSv4 trunking discovery - stable fix for error handling in the NFSv4 trunking discovery - stable fix for the page write update code - stable fix for the NFSv4.1 mount time security negotiation - stable fix for the NFSv4 open code. - O_DIRECT locking fixes - fix an Oops in the pnfs file commit code - RPC layer needs finer grained handling of connection errors - more RPC GSS upcall fixes" * tag 'nfs-for-3.14-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (30 commits) pnfs: Proper delay for NFS4ERR_RECALLCONFLICT in layout_get_done pnfs: fix BUG in filelayout_recover_commit_reqs nfs4: fix discover_server_trunking use after free NFSv4.1: Handle errors correctly in nfs41_walk_client_list nfs: always make sure page is up-to-date before extending a write to cover the entire page nfs: page cache invalidation for dio nfs: take i_mutex during direct I/O reads nfs: merge nfs_direct_write into nfs_file_direct_write nfs: merge nfs_direct_read into nfs_file_direct_read nfs: increment i_dio_count for reads, too nfs: defer inode_dio_done call until size update is done nfs: fix size updates for aio writes nfs4.1: properly handle ENOTSUP in SECINFO_NO_NAME NFSv4.1: Fix a race in nfs4_write_inode NFSv4.1: Don't trust attributes if a pNFS LAYOUTCOMMIT is outstanding point to the right include file in a comment (left over from a9004abc3) NFS: dprintk() should not print negative fileids and inode numbers nfs: fix dead code of ipv6_addr_scope sunrpc: Fix infinite loop in RPC state machine SUNRPC: Add tracepoint for socket errors ...
2014-01-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "Assorted stuff; the biggest pile here is Christoph's ACL series. Plus assorted cleanups and fixes all over the place... There will be another pile later this week" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (43 commits) __dentry_path() fixes vfs: Remove second variable named error in __dentry_path vfs: Is mounted should be testing mnt_ns for NULL or error. Fix race when checking i_size on direct i/o read hfsplus: remove can_set_xattr nfsd: use get_acl and ->set_acl fs: remove generic_acl nfs: use generic posix ACL infrastructure for v3 Posix ACLs gfs2: use generic posix ACL infrastructure jfs: use generic posix ACL infrastructure xfs: use generic posix ACL infrastructure reiserfs: use generic posix ACL infrastructure ocfs2: use generic posix ACL infrastructure jffs2: use generic posix ACL infrastructure hfsplus: use generic posix ACL infrastructure f2fs: use generic posix ACL infrastructure ext2/3/4: use generic posix ACL infrastructure btrfs: use generic posix ACL infrastructure fs: make posix_acl_create more useful fs: make posix_acl_chmod more useful ...
2014-01-28blk-mq: for_each_* macro correctnessJose Alonso
I observed that there are for_each macros that do an extra memory access beyond the defined area. Normally this does not cause problems. But, this can cause exceptions. For example: if the area is allocated at the end of a page and the next page is not accessible. For correctness, I suggest changing the arguments of the 'for loop' like others 'for_each' do in the kernel. Signed-off-by: Jose Alonso <joalonsof@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2014-01-27Merge branch 'akpm' (incoming from Andrew)Linus Torvalds
Merge misc updates from Andrew Morton: - a few hotfixes - dynamic-debug updates - ipc updates - various other sweepings off the factory floor * akpm: (31 commits) firmware/google: drop 'select EFI' to avoid recursive dependency compat: fix sys_fanotify_mark checkpatch.pl: check for function declarations without arguments mm/migrate.c: fix setting of cpupid on page migration twice against normal page softirq: use const char * const for softirq_to_name, whitespace neatening softirq: convert printks to pr_<level> softirq: use ffs() in __do_softirq() kernel/kexec.c: use vscnprintf() instead of vsnprintf() in vmcoreinfo_append_str() splice: fix unexpected size truncation ipc: fix compat msgrcv with negative msgtyp ipc,msg: document barriers ipc: delete seq_max field in struct ipc_ids ipc: simplify sysvipc_proc_open() return ipc: remove useless return statement ipc: remove braces for single statements ipc: standardize code comments ipc: whitespace cleanup ipc: change kern_ipc_perm.deleted type to bool ipc: introduce ipc_valid_object() helper to sort out IPC_RMID races ipc/sem.c: avoid overflow of semop undo (semadj) value ...
2014-01-27Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Ben Herrenschmidt: "So here's my next branch for powerpc. A bit late as I was on vacation last week. It's mostly the same stuff that was in next already, I just added two patches today which are the wiring up of lockref for powerpc, which for some reason fell through the cracks last time and is trivial. The highlights are, in addition to a bunch of bug fixes: - Reworked Machine Check handling on kernels running without a hypervisor (or acting as a hypervisor). Provides hooks to handle some errors in real mode such as TLB errors, handle SLB errors, etc... - Support for retrieving memory error information from the service processor on IBM servers running without a hypervisor and routing them to the memory poison infrastructure. - _PAGE_NUMA support on server processors - 32-bit BookE relocatable kernel support - FSL e6500 hardware tablewalk support - A bunch of new/revived board support - FSL e6500 deeper idle states and altivec powerdown support You'll notice a generic mm change here, it has been acked by the relevant authorities and is a pre-req for our _PAGE_NUMA support" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (121 commits) powerpc: Implement arch_spin_is_locked() using arch_spin_value_unlocked() powerpc: Add support for the optimised lockref implementation powerpc/powernv: Call OPAL sync before kexec'ing powerpc/eeh: Escalate error on non-existing PE powerpc/eeh: Handle multiple EEH errors powerpc: Fix transactional FP/VMX/VSX unavailable handlers powerpc: Don't corrupt transactional state when using FP/VMX in kernel powerpc: Reclaim two unused thread_info flag bits powerpc: Fix races with irq_work Move precessing of MCE queued event out from syscall exit path. pseries/cpuidle: Remove redundant call to ppc64_runlatch_off() in cpu idle routines powerpc: Make add_system_ram_resources() __init powerpc: add SATA_MV to ppc64_defconfig powerpc/powernv: Increase candidate fw image size powerpc: Add debug checks to catch invalid cpu-to-node mappings powerpc: Fix the setup of CPU-to-Node mappings during CPU online powerpc/iommu: Don't detach device without IOMMU group powerpc/eeh: Hotplug improvement powerpc/eeh: Call opal_pci_reinit() on powernv for restoring config space powerpc/eeh: Add restore_config operation ...
2014-01-27Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc mremap fix from Ben Herrenschmidt: "This is the patch that I had sent after -rc8 and which we decided to wait before merging. It's based on a different tree than my -next branch (it needs some pre-reqs that were in -rc4 or so while my -next is based on -rc1) so I left it as a separate branch for your to pull. It's identical to the request I did 2 or 3 weeks back. This fixes crashes in mremap with THP on powerpc. The fix however requires a small change in the generic code. It moves a condition into a helper we can override from the arch which is harmless, but it *also* slightly changes the order of the set_pmd and the withdraw & deposit, which should be fine according to Kirill (who wrote that code) but I agree -rc8 is a bit late... It was acked by Kirill and Andrew told me to just merge it via powerpc" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/thp: Fix crash on mremap
2014-01-27softirq: use const char * const for softirq_to_name, whitespace neateningJoe Perches
Reduce data size a little. Reduce checkpatch noise. $ size kernel/softirq.o* text data bss dec hex filename 11554 6013 4008 21575 5447 kernel/softirq.o.new 11474 6093 4008 21575 5447 kernel/softirq.o.old Signed-off-by: Joe Perches <joe@perches.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-27splice: fix unexpected size truncationXiao Guangrong
@splice_desc.total_len is 32 bit(unsigned int) which is used to store the size passed from userspace which is 64 bit(size_t) so that the size is unexpectedly truncated That means vmsplice can not work if the size passed from userspace is >= 4G, for example, we noticed in vmsplice, splice-reader does not do anything and splice-writer is waiting for available buffer forever if the size is 4G Fix it by extending @splice_desc.total_len to 64 bits as well Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-27ipc: delete seq_max field in struct ipc_idsDavidlohr Bueso
This field is only used to reset the ids seq number if it exceeds the smaller of INT_MAX/SEQ_MULTIPLIER and USHRT_MAX, and can therefore be moved out of the structure and into its own macro. Since each ipc_namespace contains a table of 3 pointers to struct ipc_ids we can save space in instruction text: text data bss dec hex filename 56232 2348 24 58604 e4ec ipc/built-in.o 56216 2348 24 58588 e4dc ipc/built-in.o-after Signed-off-by: Davidlohr Bueso <davidlohr@hp.com> Reviewed-by: Jonathan Gonzalez <jgonzalez@linets.cl> Cc: Aswin Chandramouleeswaran <aswin@hp.com> Cc: Rik van Riel <riel@redhat.com> Acked-by: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-27ipc: whitespace cleanupManfred Spraul
The ipc code does not adhere the typical linux coding style. This patch fixes lots of simple whitespace errors. - mostly autogenerated by scripts/checkpatch.pl -f --fix \ --types=pointer_location,spacing,space_before_tab - one manual fixup (keep structure members tab-aligned) - removal of additional space_before_tab that were not found by --fix Tested with some of my msg and sem test apps. Andrew: Could you include it in -mm and move it towards Linus' tree? Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Suggested-by: Li Bin <huawei.libin@huawei.com> Cc: Joe Perches <joe@perches.com> Acked-by: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-27ipc: change kern_ipc_perm.deleted type to boolRafael Aquini
struct kern_ipc_perm.deleted is meant to be used as a boolean toggle, and the changes introduced by this patch are just to make the case explicit. Signed-off-by: Rafael Aquini <aquini@redhat.com> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Greg Thelen <gthelen@google.com> Acked-by: Davidlohr Bueso <davidlohr@hp.com> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-27memblock, nobootmem: add memblock_virt_alloc_low()Yinghai Lu
The new memblock_virt APIs are used to replaced old bootmem API. We need to allocate page below 4G for swiotlb. That should fix regression on Andrew's system that is using swiotlb. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-27leds: kirkwood: Cleanup in header filesSachin Kamat
Commit c02cecb92ed4 ("ARM: orion: move platform_data definitions") moved the files to the current location but forgot to remove the pointer to its previous location. Clean it up. While at it also change the header file protection macros appropriately. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-01-27leds: leds-mc13783: Remove duplicate field in platform dataAlexander Shiyan
LED platform data are overwhelmed by excessive field "max_cur" which just replicates few bits of "led_control" field. This patch removes this field and adds a definition for the current settings in the header. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-01-27NVMe: Abort timed out commandsKeith Busch
Send nvme abort command to io requests that have timed out on an initialized device. If the command is not returned after another timeout, schedule the controller for reset. Signed-off-by: Keith Busch <keith.busch@intel.com> [fix endianness issues] Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2014-01-27NVMe: Schedule reset for failed controllersKeith Busch
Schedules a controller reset when it indicates it has a failed status. If the device does not become ready after a reset, the pci device will be scheduled for removal. Signed-off-by: Keith Busch <keith.busch@intel.com> [fixed checkpatch issue] Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2014-01-27ACPICA: Remove bool usage from ACPICA.Lv Zheng
The use of "bool" is not safe for ACPICA code where it is originally using a "BOOLEAN" defined as "unsigned char". This patch removes the only "bool" usage from kernel source tree to reduce the source code differences between Linux and ACPICA upstream. This patch is required by future acpidump release automation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-27libceph: support CEPH_FEATURE_OSD_CACHEPOOL featureIlya Dryomov
Announce our (limited, see previous commit) support for CACHEPOOL feature. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27libceph: follow redirect replies from osdsIlya Dryomov
Follow redirect replies from osds, for details see ceph.git commit fbbe3ad1220799b7bb00ea30fce581c5eadaf034. v1 (current) version of redirect reply consists of oloc and oid, which expands to pool, key, nspace, hash and oid. However, server-side code that would populate anything other than pool doesn't exist yet, and hence this commit adds support for pool redirects only. To make sure that future server-side updates don't break us, we decode all fields and, if any of key, nspace, hash or oid have a non-default value, error out with "corrupt osd_op_reply ..." message. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27libceph: rename ceph_osd_request::r_{oloc,oid} to r_base_{oloc,oid}Ilya Dryomov
Rename ceph_osd_request::r_{oloc,oid} to r_base_{oloc,oid} before introducing r_target_{oloc,oid} needed for redirects. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27libceph: follow {read,write}_tier fields on osd request submissionIlya Dryomov
Overwrite ceph_osd_request::r_oloc.pool with read_tier for read ops and write_tier for write and read+write ops (aka basic tiering support). {read,write}_tier are part of pg_pool_t since v9. This commit bumps our pg_pool_t decode compat version from v7 to v9, all new fields except for {read,write}_tier are ignored. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27libceph: add ceph_pg_pool_by_id()Ilya Dryomov
"Lookup pool info by ID" function is hidden in osdmap.c. Expose it to the rest of libceph. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27libceph: CEPH_OSD_FLAG_* enum updateIlya Dryomov
Update CEPH_OSD_FLAG_* enum. (We need CEPH_OSD_FLAG_IGNORE_OVERLAY to support tiering). Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27libceph: replace ceph_calc_ceph_pg() with ceph_oloc_oid_to_pg()Ilya Dryomov
Switch ceph_calc_ceph_pg() to new oloc and oid abstractions and rename it to ceph_oloc_oid_to_pg() to make its purpose more clear. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27libceph: introduce and start using oid abstractionIlya Dryomov
In preparation for tiering support, which would require having two (base and target) object names for each osd request and also copying those names around, introduce struct ceph_object_id (oid) and a couple helpers to facilitate those copies and encapsulate the fact that object name is not necessarily a NUL-terminated string. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27libceph: rename MAX_OBJ_NAME_SIZE to CEPH_MAX_OID_NAME_LENIlya Dryomov
In preparation for adding oid abstraction, rename MAX_OBJ_NAME_SIZE to CEPH_MAX_OID_NAME_LEN. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27libceph: move ceph_file_layout helpers to ceph_fs.hIlya Dryomov
Move ceph_file_layout helper macros and inline functions to ceph_fs.h. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27libceph: start using oloc abstractionIlya Dryomov
Instead of relying on pool fields in ceph_file_layout (for mapping) and ceph_pg (for enconding), start using ceph_object_locator (oloc) abstraction. Note that userspace oloc currently consists of pool, key, nspace and hash fields, while this one contains only a pool. This is OK, because at this point we only send (i.e. encode) olocs and never have to receive (i.e. decode) them. This makes keeping a copy of ceph_file_layout in every osd request unnecessary, so ceph_osd_request::r_file_layout field is nuked. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27arch: use ASM_NL instead of ';' for assembler new line character in the macroChen Gang
For some assemblers, they use another character as newline in a macro (e.g. arc uses '`'), so for generic assembly code, need use ASM_NL (a macro) instead of ';' for it. Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-01-27NFS: fix the handling of NFS_INO_INVALID_DATA flag in nfs_revalidate_mappingJeff Layton
There is a possible race in how the nfs_invalidate_mapping function is handled. Currently, we go and invalidate the pages in the file and then clear NFS_INO_INVALID_DATA. The problem is that it's possible for a stale page to creep into the mapping after the page was invalidated (i.e., via readahead). If another writer comes along and sets the flag after that happens but before invalidate_inode_pages2 returns then we could clear the flag without the cache having been properly invalidated. So, we must clear the flag first and then invalidate the pages. Doing this however, opens another race: It's possible to have two concurrent read() calls that end up in nfs_revalidate_mapping at the same time. The first one clears the NFS_INO_INVALID_DATA flag and then goes to call nfs_invalidate_mapping. Just before calling that though, the other task races in, checks the flag and finds it cleared. At that point, it trusts that the mapping is good and gets the lock on the page, allowing the read() to be satisfied from the cache even though the data is no longer valid. These effects are easily manifested by running diotest3 from the LTP test suite on NFS. That program does a series of DIO writes and buffered reads. The operations are serialized and page-aligned but the existing code fails the test since it occasionally allows a read to come out of the cache incorrectly. While mixing direct and buffered I/O isn't recommended, I believe it's possible to hit this in other ways that just use buffered I/O, though that situation is much harder to reproduce. The problem is that the checking/clearing of that flag and the invalidation of the mapping really need to be atomic. Fix this by serializing concurrent invalidations with a bitlock. At the same time, we also need to allow other places that check NFS_INO_INVALID_DATA to check whether we might be in the middle of invalidating the file, so fix up a couple of places that do that to look for the new NFS_INO_INVALIDATING flag. Doing this requires us to be careful not to set the bitlock unnecessarily, so this code only does that if it believes it will be doing an invalidation. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-01-27dt-bindings: qcom: Fix warning with duplicate dt defineStephen Boyd
arch/arm/boot/dts/include/dt-bindings/clock/qcom,mmcc-msm8974.h:60:0: warning: "RBCPR_CLK_SRC" redefined Rename this to MMSS_RBCPR_CLK_SRC to avoid conflicts with the RBCPR clock in the gcc header. Reported-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-27clk: si5351: remove variant from platform_dataSebastian Hesselbarth
Commit 9807362bfe1748d9bb48eecb9261f1b1aaafea1c "clk: si5351: declare all device IDs for module loading" removed the common i2c_device_id and introduced new ones for each variant of the clock generator. Instead of exploiting that information in the driver, it still depends on platform_data passing the chips .variant. This removes the now redundant .variant from the platform_data and puts it in i2c_device_id's .driver_data instead. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-26net: add and use skb_gso_transport_seglen()Florian Westphal
This moves part of Eric Dumazets skb_gso_seglen helper from tbf sched to skbuff core so it may be reused by upcoming ip forwarding path patch. Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-26i2c: update i2c_algorithm documentationBen Dooks
Add some kerneldoc style documentaton to the i2c_algorithm structure, and point the master_xfer return codes at the right place in Documentation/i2c/fault_codes Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>