| Age | Commit message (Collapse) | Author |
|---|
|
The driver found its inception a little after the year 201. According
git blame output it was added in 2016 so lets go with that.
Fixes: 4d7928959832 ("brcmfmac: switch to new platform data")
Reported-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240128093057.164791-3-arend.vanspriel@broadcom.com
|
|
sched scan"
This *mostly* reverts commit 1e1b11b6a111 ("nl80211/cfg80211: Specify
band specific min RSSI thresholds with sched scan").
During the review of a new patch [1] it was observed that the
functionality being modified was not actually being used by any
in-tree driver. Further research determined that the functionality was
originally introduced to support a new Android interface, but that
interface was subsequently abandoned. Since the functionality has
apparently never been used, remove it. However, to mantain the
sanctity of the UABI, keep the nl80211.h assignments, but clearly mark
them as obsolete.
Cc: Lin Ma <linma@zju.edu.cn>
Cc: Vamsi Krishna <quic_vamsin@quicinc.com>
Link: https://lore.kernel.org/linux-wireless/20240119151201.8670-1-linma@zju.edu.cn/ [1]
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/20240125-for-next-v1-1-fd79e01c6c09@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When going into an MLO connection, validate that the link IDs
match what userspace indicated, and that the AP MLD addresses
and capabilities are all matching between the links.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240102213313.ff83c034cb9a.I9962db0bfa8c73b37b8d5b59a3fad7f02f2129ae@changeid
[roll in extra fix from Miri to actually check the return value]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If software crypto is used, simply add support for SPP A-MSDUs
(and use it whenever enabled as required by the cfg80211 API).
If hardware crypto is used, leave it up to the driver to set
the NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT flag and then check
sta->spp_amsdu or the IEEE80211_KEY_FLAG_SPP_AMSDU key flag.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240102213313.b8ada4514e2b.I1ac25d5f158165b5a88062a5a5e4c4fbeecf9a5d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add SPP (signaling and payload protected) AMSDU support.
Since userspace has to build the RSNX element, add an extended
feature flag to indicate that this is supported.
In order to avoid downgrade/mismatch attacks, add a flag to the assoc
command on the station side, so that we can be sure that the value of
the flag comes from the same RSNX element that will be validated by
the supplicant against the 4-way-handshake. If we just pulled the
data out of a beacon/probe response, we could theoretically look an
RSNX element from a different frame, with a different value for this
flag, than the supplicant is using to validate in the
4-way-handshake.
Note that this patch is only geared towards software crypto
implementations or hardware ones that can perfectly implement SPP
A-MSDUs, i.e. are able to switch the AAD construction on the fly for
each TX/RX frame.
For more limited hardware implementations, more capability
advertisement would be required, e.g. if the hardware has no way
to switch this on the fly but has only a global configuration that
must apply to all stations.
The driver could of course *reject* mismatches, but the supplicant
must know so it can do things like not negotiating SPP A-MSDUs on
a T-DLS link when connected to an AP that doesn't support it, or
similar.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240102213313.fadac8df7030.I9240aebcba1be49636a73c647ed0af862713fc6f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Update neg_ttlm and active_links according to the new mapping,
and send a negotiated TID-to-link map request with the new mapping.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240102213313.eeb385d771df.I2a5441c14421de884dbd93d1624ce7bb2c944833@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
An MLD may send TID-to-Link mapping request frame to negotiate
TID to link mapping with a peer MLD.
Support handling negotiated TID-to-Link mapping request frame
by parsing the frame, asking the driver whether it supports the
received mapping or not, and sending a TID-to-Link mapping response
to the AP MLD.
Theoretically, links that became inactive due to the received TID-to-Link
mapping request, can be selected to be activated but this would require
tearing down the negotiated TID-to-Link mapping, which is still not
supported.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240102213313.0bc1a24fcc9d.Ie72e47dc6f8c77d4a2f0947b775ef6367fe0edac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add the relevant definitions and structures for TID to Link mapping
negotiation request/response/teardown according to P802.11be_D4.0.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240102213313.9ef2b866c8c7.Ieaf7dadea9961e0edc55d19c99f0f9fbae591de6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, netfilter and WiFi.
Jakub is doing a lot of work to include the self-tests in our CI, as a
result a significant amount of self-tests related fixes is flowing in
(and will likely continue in the next few weeks).
Current release - regressions:
- bpf: fix a kernel crash for the riscv 64 JIT
- bnxt_en: fix memory leak in bnxt_hwrm_get_rings()
- revert "net: macsec: use skb_ensure_writable_head_tail to expand
the skb"
Previous releases - regressions:
- core: fix removing a namespace with conflicting altnames
- tc/flower: fix chain template offload memory leak
- tcp:
- make sure init the accept_queue's spinlocks once
- fix autocork on CPUs with weak memory model
- udp: fix busy polling
- mlx5e:
- fix out-of-bound read in port timestamping
- fix peer flow lists corruption
- iwlwifi: fix a memory corruption
Previous releases - always broken:
- netfilter:
- nft_chain_filter: handle NETDEV_UNREGISTER for inet/ingress
basechain
- nft_limit: reject configurations that cause integer overflow
- bpf: fix bpf_xdp_adjust_tail() with XSK zero-copy mbuf, avoiding a
NULL pointer dereference upon shrinking
- llc: make llc_ui_sendmsg() more robust against bonding changes
- smc: fix illegal rmb_desc access in SMC-D connection dump
- dpll: fix pin dump crash for rebound module
- bnxt_en: fix possible crash after creating sw mqprio TCs
- hv_netvsc: calculate correct ring size when PAGE_SIZE is not 4kB
Misc:
- several self-tests fixes for better integration with the netdev CI
- added several missing modules descriptions"
* tag 'net-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
tsnep: Fix XDP_RING_NEED_WAKEUP for empty fill ring
tsnep: Remove FCS for XDP data path
net: fec: fix the unhandled context fault from smmu
selftests: bonding: do not test arp/ns target with mode balance-alb/tlb
fjes: fix memleaks in fjes_hw_setup
i40e: update xdp_rxq_info::frag_size for ZC enabled Rx queue
i40e: set xdp_rxq_info::frag_size
xdp: reflect tail increase for MEM_TYPE_XSK_BUFF_POOL
ice: update xdp_rxq_info::frag_size for ZC enabled Rx queue
intel: xsk: initialize skb_frag_t::bv_offset in ZC drivers
ice: remove redundant xdp_rxq_info registration
i40e: handle multi-buffer packets that are shrunk by xdp prog
ice: work on pre-XDP prog frag count
xsk: fix usage of multi-buffer BPF helpers for ZC XDP
xsk: make xsk_buff_pool responsible for clearing xdp_buff::flags
xsk: recycle buffer in case Rx queue was full
net: fill in MODULE_DESCRIPTION()s for rvu_mbox
net: fill in MODULE_DESCRIPTION()s for litex
net: fill in MODULE_DESCRIPTION()s for fsl_pq_mdio
net: fill in MODULE_DESCRIPTION()s for fec
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull netfs fixes from Christian Brauner:
"This contains various fixes for the netfs work merged earlier this
cycle:
afs:
- Fix locking imbalance in afs_proc_addr_prefs_show()
- Remove afs_dynroot_d_revalidate() which is redundant
- Fix error handling during lookup
- Hide sillyrenames from userspace. This fixes a race between
silly-rename files being created/removed and userspace iterating
over directory entries
- Don't use unnecessary folio_*() functions
cifs:
- Don't use unnecessary folio_*() functions
cachefiles:
- erofs: Fix Null dereference when cachefiles are not doing
ondemand-mode
- Update mailing list
netfs library:
- Add Jeff Layton as reviewer
- Update mailing list
- Fix a error checking in netfs_perform_write()
- fscache: Check error before dereferencing
- Don't use unnecessary folio_*() functions"
* tag 'vfs-6.8-rc2.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
afs: Fix missing/incorrect unlocking of RCU read lock
afs: Remove afs_dynroot_d_revalidate() as it is redundant
afs: Fix error handling with lookup via FS.InlineBulkStatus
afs: Hide silly-rename files from userspace
cachefiles, erofs: Fix NULL deref in when cachefiles is not doing ondemand-mode
netfs: Fix a NULL vs IS_ERR() check in netfs_perform_write()
netfs, fscache: Prevent Oops in fscache_put_cache()
cifs: Don't use certain unnecessary folio_*() functions
afs: Don't use certain unnecessary folio_*() functions
netfs: Don't use certain unnecessary folio_*() functions
netfs: Add Jeff Layton as reviewer
netfs, cachefiles: Change mailing list
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2024-01-24
This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
* tag 'mlx5-fixes-2024-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: fix a potential double-free in fs_any_create_groups
net/mlx5e: fix a double-free in arfs_create_groups
net/mlx5e: Ignore IPsec replay window values on sender side
net/mlx5e: Allow software parsing when IPsec crypto is enabled
net/mlx5: Use mlx5 device constant for selecting CQ period mode for ASO
net/mlx5: DR, Can't go to uplink vport on RX rule
net/mlx5: DR, Use the right GVMI number for drop action
net/mlx5: Bridge, fix multicast packets sent to uplink
net/mlx5: Fix a WARN upon a callback command failure
net/mlx5e: Fix peer flow lists handling
net/mlx5e: Fix inconsistent hairpin RQT sizes
net/mlx5e: Fix operation precedence bug in port timestamping napi_poll context
net/mlx5: Fix query of sd_group field
net/mlx5e: Use the correct lag ports number when creating TISes
====================
Link: https://lore.kernel.org/r/20240124081855.115410-1-saeed@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-01-25
The following pull-request contains BPF updates for your *net* tree.
We've added 12 non-merge commits during the last 2 day(s) which contain
a total of 13 files changed, 190 insertions(+), 91 deletions(-).
The main changes are:
1) Fix bpf_xdp_adjust_tail() in context of XSK zero-copy drivers which
support XDP multi-buffer. The former triggered a NULL pointer
dereference upon shrinking, from Maciej Fijalkowski & Tirthendu Sarkar.
2) Fix a bug in riscv64 BPF JIT which emitted a wrong prologue and
epilogue for struct_ops programs, from Pu Lehui.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
i40e: update xdp_rxq_info::frag_size for ZC enabled Rx queue
i40e: set xdp_rxq_info::frag_size
xdp: reflect tail increase for MEM_TYPE_XSK_BUFF_POOL
ice: update xdp_rxq_info::frag_size for ZC enabled Rx queue
intel: xsk: initialize skb_frag_t::bv_offset in ZC drivers
ice: remove redundant xdp_rxq_info registration
i40e: handle multi-buffer packets that are shrunk by xdp prog
ice: work on pre-XDP prog frag count
xsk: fix usage of multi-buffer BPF helpers for ZC XDP
xsk: make xsk_buff_pool responsible for clearing xdp_buff::flags
xsk: recycle buffer in case Rx queue was full
riscv, bpf: Fix unpredictable kernel crash about RV64 struct_ops
====================
Link: https://lore.kernel.org/r/20240125084416.10876-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently when packet is shrunk via bpf_xdp_adjust_tail() and memory
type is set to MEM_TYPE_XSK_BUFF_POOL, null ptr dereference happens:
[1136314.192256] BUG: kernel NULL pointer dereference, address:
0000000000000034
[1136314.203943] #PF: supervisor read access in kernel mode
[1136314.213768] #PF: error_code(0x0000) - not-present page
[1136314.223550] PGD 0 P4D 0
[1136314.230684] Oops: 0000 [#1] PREEMPT SMP NOPTI
[1136314.239621] CPU: 8 PID: 54203 Comm: xdpsock Not tainted 6.6.0+ #257
[1136314.250469] Hardware name: Intel Corporation S2600WFT/S2600WFT,
BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[1136314.265615] RIP: 0010:__xdp_return+0x6c/0x210
[1136314.274653] Code: ad 00 48 8b 47 08 49 89 f8 a8 01 0f 85 9b 01 00 00 0f 1f 44 00 00 f0 41 ff 48 34 75 32 4c 89 c7 e9 79 cd 80 ff 83 fe 03 75 17 <f6> 41 34 01 0f 85 02 01 00 00 48 89 cf e9 22 cc 1e 00 e9 3d d2 86
[1136314.302907] RSP: 0018:ffffc900089f8db0 EFLAGS: 00010246
[1136314.312967] RAX: ffffc9003168aed0 RBX: ffff8881c3300000 RCX:
0000000000000000
[1136314.324953] RDX: 0000000000000000 RSI: 0000000000000003 RDI:
ffffc9003168c000
[1136314.336929] RBP: 0000000000000ae0 R08: 0000000000000002 R09:
0000000000010000
[1136314.348844] R10: ffffc9000e495000 R11: 0000000000000040 R12:
0000000000000001
[1136314.360706] R13: 0000000000000524 R14: ffffc9003168aec0 R15:
0000000000000001
[1136314.373298] FS: 00007f8df8bbcb80(0000) GS:ffff8897e0e00000(0000)
knlGS:0000000000000000
[1136314.386105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1136314.396532] CR2: 0000000000000034 CR3: 00000001aa912002 CR4:
00000000007706f0
[1136314.408377] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[1136314.420173] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[1136314.431890] PKRU: 55555554
[1136314.439143] Call Trace:
[1136314.446058] <IRQ>
[1136314.452465] ? __die+0x20/0x70
[1136314.459881] ? page_fault_oops+0x15b/0x440
[1136314.468305] ? exc_page_fault+0x6a/0x150
[1136314.476491] ? asm_exc_page_fault+0x22/0x30
[1136314.484927] ? __xdp_return+0x6c/0x210
[1136314.492863] bpf_xdp_adjust_tail+0x155/0x1d0
[1136314.501269] bpf_prog_ccc47ae29d3b6570_xdp_sock_prog+0x15/0x60
[1136314.511263] ice_clean_rx_irq_zc+0x206/0xc60 [ice]
[1136314.520222] ? ice_xmit_zc+0x6e/0x150 [ice]
[1136314.528506] ice_napi_poll+0x467/0x670 [ice]
[1136314.536858] ? ttwu_do_activate.constprop.0+0x8f/0x1a0
[1136314.546010] __napi_poll+0x29/0x1b0
[1136314.553462] net_rx_action+0x133/0x270
[1136314.561619] __do_softirq+0xbe/0x28e
[1136314.569303] do_softirq+0x3f/0x60
This comes from __xdp_return() call with xdp_buff argument passed as
NULL which is supposed to be consumed by xsk_buff_free() call.
To address this properly, in ZC case, a node that represents the frag
being removed has to be pulled out of xskb_list. Introduce
appropriate xsk helpers to do such node operation and use them
accordingly within bpf_xdp_adjust_tail().
Fixes: 24ea50127ecf ("xsk: support mbuf on ZC RX")
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> # For the xsk header part
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20240124191602.566724-4-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
XDP multi-buffer support introduced XDP_FLAGS_HAS_FRAGS flag that is
used by drivers to notify data path whether xdp_buff contains fragments
or not. Data path looks up mentioned flag on first buffer that occupies
the linear part of xdp_buff, so drivers only modify it there. This is
sufficient for SKB and XDP_DRV modes as usually xdp_buff is allocated on
stack or it resides within struct representing driver's queue and
fragments are carried via skb_frag_t structs. IOW, we are dealing with
only one xdp_buff.
ZC mode though relies on list of xdp_buff structs that is carried via
xsk_buff_pool::xskb_list, so ZC data path has to make sure that
fragments do *not* have XDP_FLAGS_HAS_FRAGS set. Otherwise,
xsk_buff_free() could misbehave if it would be executed against xdp_buff
that carries a frag with XDP_FLAGS_HAS_FRAGS flag set. Such scenario can
take place when within supplied XDP program bpf_xdp_adjust_tail() is
used with negative offset that would in turn release the tail fragment
from multi-buffer frame.
Calling xsk_buff_free() on tail fragment with XDP_FLAGS_HAS_FRAGS would
result in releasing all the nodes from xskb_list that were produced by
driver before XDP program execution, which is not what is intended -
only tail fragment should be deleted from xskb_list and then it should
be put onto xsk_buff_pool::free_list. Such multi-buffer frame will never
make it up to user space, so from AF_XDP application POV there would be
no traffic running, however due to free_list getting constantly new
nodes, driver will be able to feed HW Rx queue with recycled buffers.
Bottom line is that instead of traffic being redirected to user space,
it would be continuously dropped.
To fix this, let us clear the mentioned flag on xsk_buff_pool side
during xdp_buff initialization, which is what should have been done
right from the start of XSK multi-buffer support.
Fixes: 1bbc04de607b ("ice: xsk: add RX multi-buffer support")
Fixes: 1c9ba9c14658 ("i40e: xsk: add RX multi-buffer support")
Fixes: 24ea50127ecf ("xsk: support mbuf on ZC RX")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20240124191602.566724-3-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve fixes from Kees Cook:
- Fix error handling in begin_new_exec() (Bernd Edlinger)
- MAINTAINERS: specifically mention ELF (Alexey Dobriyan)
- Various cleanups related to earlier open() (Askar Safin, Kees Cook)
* tag 'execve-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
exec: Distinguish in_execve from in_exec
exec: Fix error handling in begin_new_exec()
exec: Add do_close_execat() helper
exec: remove useless comment
ELF, MAINTAINERS: specifically mention ELF
|
|
Just to help distinguish the fs->in_exec flag from the current->in_execve
flag, add comments in check_unsafe_exec() and copy_fs() for more
context. Also note that in_execve is only used by TOMOYO now.
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-mm@kvack.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
- Correct comments for nlpid, family, udlen and udata in struct nft_table,
and afinfo is no longer a member of enum nft_set_class.
- Add comment for data in struct nft_set_elem.
- Add comment for flags in struct nft_ctx.
- Add comments for timeout in struct nft_set_iter, and flags is not a
member of struct nft_set_iter, remove the comment for it.
- Add comments for commit, abort, estimate and gc_init in struct
nft_set_ops.
- Add comments for pending_update, num_exprs, exprs and catchall_list
in struct nft_set.
- Add comment for ext_len in struct nft_set_ext_tmpl.
- Add comment for inner_ops in struct nft_expr_type.
- Add comments for clone, destroy_clone, reduce, gc, offload,
offload_action, offload_stats in struct nft_expr_ops.
- Add comments for blob_gen_0, blob_gen_1, bound, genmask, udlen, udata,
blob_next in struct nft_chain.
- Add comment for flags in struct nft_base_chain.
- Add comments for udlen, udata in struct nft_object.
- Add comment for type in struct nft_object_ops.
- Add comment for hook_list in struct nft_flowtable, and remove comments
for dev_name and ops which are not members of struct nft_flowtable.
Signed-off-by: George Guo <guodongtai@kylinos.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
To enable multicast packets which are offloaded in bridge multicast
offload mode to be sent also to uplink, FTE bit uplink_hairpin_en should
be set. Add this bit to FTE for the bridge multicast offload rules.
Fixes: 18c2916cee12 ("net/mlx5: Bridge, snoop igmp/mld packets")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The sd_group field moved in the HW spec from the MPIR register
to the vport context.
Align the query accordingly.
Fixes: f5e956329960 ("net/mlx5: Expose Management PCIe Index Register (MPIR)")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The cited commit moved the code of mlx5e_create_tises() and changed the
loop to create TISes over MLX5_MAX_PORTS constant value, instead of
getting the correct lag ports supported by the device, which can cause
FW errors on devices with less than MLX5_MAX_PORTS ports.
Change that back to mlx5e_get_num_lag_ports(mdev).
Also IPoIB interfaces create there own TISes, they don't use the eth
TISes, pass a flag to indicate that.
This fixes the following errors that might appear in kernel log:
mlx5_cmd_out_err:808:(pid 650): CREATE_TIS(0x912) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x595b5d), err(-22)
mlx5e_create_mdev_resources:174:(pid 650): alloc tises failed, -22
Fixes: b25bd37c859f ("net/mlx5: Move TISes from priv to mdev HW resources")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When a qdisc is deleted from a net device the stack instructs the
underlying driver to remove its flow offload callback from the
associated filter block using the 'FLOW_BLOCK_UNBIND' command. The stack
then continues to replay the removal of the filters in the block for
this driver by iterating over the chains in the block and invoking the
'reoffload' operation of the classifier being used. In turn, the
classifier in its 'reoffload' operation prepares and emits a
'FLOW_CLS_DESTROY' command for each filter.
However, the stack does not do the same for chain templates and the
underlying driver never receives a 'FLOW_CLS_TMPLT_DESTROY' command when
a qdisc is deleted. This results in a memory leak [1] which can be
reproduced using [2].
Fix by introducing a 'tmplt_reoffload' operation and have the stack
invoke it with the appropriate arguments as part of the replay.
Implement the operation in the sole classifier that supports chain
templates (flower) by emitting the 'FLOW_CLS_TMPLT_{CREATE,DESTROY}'
command based on whether a flow offload callback is being bound to a
filter block or being unbound from one.
As far as I can tell, the issue happens since cited commit which
reordered tcf_block_offload_unbind() before tcf_block_flush_all_chains()
in __tcf_block_put(). The order cannot be reversed as the filter block
is expected to be freed after flushing all the chains.
[1]
unreferenced object 0xffff888107e28800 (size 2048):
comm "tc", pid 1079, jiffies 4294958525 (age 3074.287s)
hex dump (first 32 bytes):
b1 a6 7c 11 81 88 ff ff e0 5b b3 10 81 88 ff ff ..|......[......
01 00 00 00 00 00 00 00 e0 aa b0 84 ff ff ff ff ................
backtrace:
[<ffffffff81c06a68>] __kmem_cache_alloc_node+0x1e8/0x320
[<ffffffff81ab374e>] __kmalloc+0x4e/0x90
[<ffffffff832aec6d>] mlxsw_sp_acl_ruleset_get+0x34d/0x7a0
[<ffffffff832bc195>] mlxsw_sp_flower_tmplt_create+0x145/0x180
[<ffffffff832b2e1a>] mlxsw_sp_flow_block_cb+0x1ea/0x280
[<ffffffff83a10613>] tc_setup_cb_call+0x183/0x340
[<ffffffff83a9f85a>] fl_tmplt_create+0x3da/0x4c0
[<ffffffff83a22435>] tc_ctl_chain+0xa15/0x1170
[<ffffffff838a863c>] rtnetlink_rcv_msg+0x3cc/0xed0
[<ffffffff83ac87f0>] netlink_rcv_skb+0x170/0x440
[<ffffffff83ac6270>] netlink_unicast+0x540/0x820
[<ffffffff83ac6e28>] netlink_sendmsg+0x8d8/0xda0
[<ffffffff83793def>] ____sys_sendmsg+0x30f/0xa80
[<ffffffff8379d29a>] ___sys_sendmsg+0x13a/0x1e0
[<ffffffff8379d50c>] __sys_sendmsg+0x11c/0x1f0
[<ffffffff843b9ce0>] do_syscall_64+0x40/0xe0
unreferenced object 0xffff88816d2c0400 (size 1024):
comm "tc", pid 1079, jiffies 4294958525 (age 3074.287s)
hex dump (first 32 bytes):
40 00 00 00 00 00 00 00 57 f6 38 be 00 00 00 00 @.......W.8.....
10 04 2c 6d 81 88 ff ff 10 04 2c 6d 81 88 ff ff ..,m......,m....
backtrace:
[<ffffffff81c06a68>] __kmem_cache_alloc_node+0x1e8/0x320
[<ffffffff81ab36c1>] __kmalloc_node+0x51/0x90
[<ffffffff81a8ed96>] kvmalloc_node+0xa6/0x1f0
[<ffffffff82827d03>] bucket_table_alloc.isra.0+0x83/0x460
[<ffffffff82828d2b>] rhashtable_init+0x43b/0x7c0
[<ffffffff832aed48>] mlxsw_sp_acl_ruleset_get+0x428/0x7a0
[<ffffffff832bc195>] mlxsw_sp_flower_tmplt_create+0x145/0x180
[<ffffffff832b2e1a>] mlxsw_sp_flow_block_cb+0x1ea/0x280
[<ffffffff83a10613>] tc_setup_cb_call+0x183/0x340
[<ffffffff83a9f85a>] fl_tmplt_create+0x3da/0x4c0
[<ffffffff83a22435>] tc_ctl_chain+0xa15/0x1170
[<ffffffff838a863c>] rtnetlink_rcv_msg+0x3cc/0xed0
[<ffffffff83ac87f0>] netlink_rcv_skb+0x170/0x440
[<ffffffff83ac6270>] netlink_unicast+0x540/0x820
[<ffffffff83ac6e28>] netlink_sendmsg+0x8d8/0xda0
[<ffffffff83793def>] ____sys_sendmsg+0x30f/0xa80
[2]
# tc qdisc add dev swp1 clsact
# tc chain add dev swp1 ingress proto ip chain 1 flower dst_ip 0.0.0.0/32
# tc qdisc del dev swp1 clsact
# devlink dev reload pci/0000:06:00.0
Fixes: bbf73830cd48 ("net: sched: traverse chains in block with tcf_get_next_chain()")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In some configurations, the 'iter' variable in function
fib6_repair_tree() is unused, resulting the following warning when
compiled with W=1.
net/ipv6/ip6_fib.c:1781:6: warning: variable 'iter' set but not used [-Wunused-but-set-variable]
1781 | int iter = 0;
| ^
It is unclear what is the advantage of this RT6_TRACE() macro[1], since
users can control pr_debug() in runtime, which is better than at
compilation time. pr_debug() has no overhead when disabled.
Remove the RT6_TRACE() in favor of simple pr_debug() helpers.
[1] Link: https://lore.kernel.org/all/ZZwSEJv2HgI0cD4J@gmail.com/
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240122181955.2391676-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TCPDIAG_GETSOCK and DCCPDIAG_GETSOCK diag are serialized
on sock_diag_table_mutex.
This is to make sure inet_diag module is not unloaded
while diag was ongoing.
It is time to get rid of this mutex and use RCU protection,
allowing full parallelism.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Following patch is going to use RCU instead of
sock_diag_table_mutex acquisition.
This patch is a preparation, no change of behavior yet.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Following patch is going to use RCU instead of
inet_diag_table_mutex acquisition.
This patch is a preparation, no change of behavior yet.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When afs does a lookup, it tries to use FS.InlineBulkStatus to preemptively
look up a bunch of files in the parent directory and cache this locally, on
the basis that we might want to look at them too (for example if someone
does an ls on a directory, they may want want to then stat every file
listed).
FS.InlineBulkStatus can be considered a compound op with the normal abort
code applying to the compound as a whole. Each status fetch within the
compound is then given its own individual abort code - but assuming no
error that prevents the bulk fetch from returning the compound result will
be 0, even if all the constituent status fetches failed.
At the conclusion of afs_do_lookup(), we should use the abort code from the
appropriate status to determine the error to return, if any - but instead
it is assumed that we were successful if the op as a whole succeeded and we
return an incompletely initialised inode, resulting in ENOENT, no matter
the actual reason. In the particular instance reported, a vnode with no
permission granted to be accessed is being given a UAEACCES abort code
which should be reported as EACCES, but is instead being reported as
ENOENT.
Fix this by abandoning the inode (which will be cleaned up with the op) if
file[1] has an abort code indicated and turn that abort code into an error
instead.
Whilst we're at it, add a tracepoint so that the abort codes of the
individual subrequests of FS.InlineBulkStatus can be logged. At the moment
only the container abort code can be 0.
Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept")
Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- zoned mode fixes:
- fix slowdown when writing large file sequentially by looking up
block groups with enough space faster
- locking fixes when activating a zone
- new mount API fixes:
- preserve mount options for a ro/rw mount of the same subvolume
- scrub fixes:
- fix use-after-free in case the chunk length is not aligned to
64K, this does not happen normally but has been reported on
images converted from ext4
- similar alignment check was missing with raid-stripe-tree
- subvolume deletion fixes:
- prevent calling ioctl on already deleted subvolume
- properly track flag tracking a deleted subvolume
- in subpage mode, fix decompression of an inline extent (zlib, lzo,
zstd)
- fix crash when starting writeback on a folio, after integration with
recent MM changes this needs to be started conditionally
- reject unknown flags in defrag ioctl
- error handling, API fixes, minor warning fixes
* tag 'for-6.8-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: scrub: limit RST scrub to chunk boundary
btrfs: scrub: avoid use-after-free when chunk length is not 64K aligned
btrfs: don't unconditionally call folio_start_writeback in subpage
btrfs: use the original mount's mount options for the legacy reconfigure
btrfs: don't warn if discard range is not aligned to sector
btrfs: tree-checker: fix inline ref size in error messages
btrfs: zstd: fix and simplify the inline extent decompression
btrfs: lzo: fix and simplify the inline extent decompression
btrfs: zlib: fix and simplify the inline extent decompression
btrfs: defrag: reject unknown flags of btrfs_ioctl_defrag_range_args
btrfs: avoid copying BTRFS_ROOT_SUBVOL_DEAD flag to snapshot of subvolume being deleted
btrfs: don't abort filesystem when attempting to snapshot deleted subvolume
btrfs: zoned: fix lock ordering in btrfs_zone_activate()
btrfs: fix unbalanced unlock of mapping_tree_lock
btrfs: ref-verify: free ref cache before clearing mount opt
btrfs: fix kvcalloc() arguments order in btrfs_ioctl_send()
btrfs: zoned: optimize hint byte for zoned allocator
btrfs: zoned: factor out prepare_allocation_zoned()
|
|
Pull header fix from Kent Overstreet:
"Just one small fixup for the RT build"
* tag 'header_cleanup-2024-01-20' of https://evilpiepirate.org/git/bcachefs:
spinlock: Fix failing build for PREEMPT_RT
|
|
Generic sk_busy_loop_end() only looks at sk->sk_receive_queue
for presence of packets.
Problem is that for UDP sockets after blamed commit, some packets
could be present in another queue: udp_sk(sk)->reader_queue
In some cases, a busy poller could spin until timeout expiration,
even if some packets are available in udp_sk(sk)->reader_queue.
v3: - make sk_busy_loop_end() nicer (Willem)
v2: - add a READ_ONCE(sk->sk_family) in sk_is_inet() to avoid KCSAN splats.
- add a sk_is_inet() check in sk_is_udp() (Willem feedback)
- add a sk_is_inet() check in sk_is_tcp().
Fixes: 2276f58ac589 ("udp: use a separate rx queue for packet reception")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support:
- Loongson LS2X APB DMA controller
- sf-pdma: mpfs-pdma support
- Qualcomm X1E80100 GPI dma controller support
Updates:
- Xilinx XDMA updates to support interleaved DMA transfers
- TI PSIL threads for AM62P and J722S and cfg register regions
description
- axi-dmac Improving the cyclic DMA transfers
- Tegra Support dma-channel-mask property
- Remaining platform remove callback returning void conversions
Driver fixes for:
- Xilinx xdma driver operator precedence and initialization fix
- Excess kernel-doc warning fix in imx-sdma xilinx xdma drivers
- format-overflow warning fix for rz-dmac, sh usb dmac drivers
- 'output may be truncated' fix for shdma, fsl-qdma and dw-edma
drivers"
* tag 'dmaengine-fix-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (58 commits)
dmaengine: dw-edma: increase size of 'name' in debugfs code
dmaengine: fsl-qdma: increase size of 'irq_name'
dmaengine: shdma: increase size of 'dev_id'
dmaengine: xilinx: xdma: Fix kernel-doc warnings
dmaengine: usb-dmac: Avoid format-overflow warning
dmaengine: sh: rz-dmac: Avoid format-overflow warning
dmaengine: imx-sdma: fix Excess kernel-doc warnings
dmaengine: xilinx: xdma: Fix initialization location of desc in xdma_channel_isr()
dmaengine: xilinx: xdma: Fix operator precedence in xdma_prep_interleaved_dma()
dmaengine: xilinx: xdma: statify xdma_prep_interleaved_dma
dmaengine: xilinx: xdma: Workaround truncation compilation error
dmaengine: pl330: issue_pending waits until WFP state
dmaengine: xilinx: xdma: Implement interleaved DMA transfers
dmaengine: xilinx: xdma: Prepare the introduction of interleaved DMA transfers
dmaengine: xilinx: xdma: Add transfer error reporting
dmaengine: xilinx: xdma: Add error checking in xdma_channel_isr()
dmaengine: xilinx: xdma: Rework xdma_terminate_all()
dmaengine: xilinx: xdma: Ease dma_pool alignment requirements
dmaengine: xilinx: xdma: Add necessary macro definitions
dmaengine: xilinx: xdma: Get rid of unused code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for tuning for systems with fast misaligned accesses.
- Support for SBI-based suspend.
- Support for the new SBI debug console extension.
- The T-Head CMOs now use PA-based flushes.
- Support for enabling the V extension in kernel code.
- Optimized IP checksum routines.
- Various ftrace improvements.
- Support for archrandom, which depends on the Zkr extension.
- The build is no longer broken under NET=n, KUNIT=y for ports that
don't define their own ipv6 checksum.
* tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (56 commits)
lib: checksum: Fix build with CONFIG_NET=n
riscv: lib: Check if output in asm goto supported
riscv: Fix build error on rv32 + XIP
riscv: optimize ELF relocation function in riscv
RISC-V: Implement archrandom when Zkr is available
riscv: Optimize hweight API with Zbb extension
riscv: add dependency among Image(.gz), loader(.bin), and vmlinuz.efi
samples: ftrace: Add RISC-V support for SAMPLE_FTRACE_DIRECT[_MULTI]
riscv: ftrace: Add DYNAMIC_FTRACE_WITH_DIRECT_CALLS support
riscv: ftrace: Make function graph use ftrace directly
riscv: select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
lib/Kconfig.debug: Update AS_HAS_NON_CONST_LEB128 comment and name
riscv: Restrict DWARF5 when building with LLVM to known working versions
riscv: Hoist linker relaxation disabling logic into Kconfig
kunit: Add tests for csum_ipv6_magic and ip_fast_csum
riscv: Add checksum library
riscv: Add checksum header
riscv: Add static key for misaligned accesses
asm-generic: Improve csum_fold
RISC-V: selftests: cbo: Ensure asm operands match constraints
...
|
|
syzbot reported an uninit-value bug below. [0]
llc supports ETH_P_802_2 (0x0004) and used to support ETH_P_TR_802_2
(0x0011), and syzbot abused the latter to trigger the bug.
write$tun(r0, &(0x7f0000000040)={@val={0x0, 0x11}, @val, @mpls={[], @llc={@snap={0xaa, 0x1, ')', "90e5dd"}}}}, 0x16)
llc_conn_handler() initialises local variables {saddr,daddr}.mac
based on skb in llc_pdu_decode_sa()/llc_pdu_decode_da() and passes
them to __llc_lookup().
However, the initialisation is done only when skb->protocol is
htons(ETH_P_802_2), otherwise, __llc_lookup_established() and
__llc_lookup_listener() will read garbage.
The missing initialisation existed prior to commit 211ed865108e
("net: delete all instances of special processing for token ring").
It removed the part to kick out the token ring stuff but forgot to
close the door allowing ETH_P_TR_802_2 packets to sneak into llc_rcv().
Let's remove llc_tr_packet_type and complete the deprecation.
[0]:
BUG: KMSAN: uninit-value in __llc_lookup_established+0xe9d/0xf90
__llc_lookup_established+0xe9d/0xf90
__llc_lookup net/llc/llc_conn.c:611 [inline]
llc_conn_handler+0x4bd/0x1360 net/llc/llc_conn.c:791
llc_rcv+0xfbb/0x14a0 net/llc/llc_input.c:206
__netif_receive_skb_one_core net/core/dev.c:5527 [inline]
__netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5641
netif_receive_skb_internal net/core/dev.c:5727 [inline]
netif_receive_skb+0x58/0x660 net/core/dev.c:5786
tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555
tun_get_user+0x53af/0x66d0 drivers/net/tun.c:2002
tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048
call_write_iter include/linux/fs.h:2020 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x8ef/0x1490 fs/read_write.c:584
ksys_write+0x20f/0x4c0 fs/read_write.c:637
__do_sys_write fs/read_write.c:649 [inline]
__se_sys_write fs/read_write.c:646 [inline]
__x64_sys_write+0x93/0xd0 fs/read_write.c:646
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Local variable daddr created at:
llc_conn_handler+0x53/0x1360 net/llc/llc_conn.c:783
llc_rcv+0xfbb/0x14a0 net/llc/llc_input.c:206
CPU: 1 PID: 5004 Comm: syz-executor994 Not tainted 6.6.0-syzkaller-14500-g1c41041124bd #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023
Fixes: 211ed865108e ("net: delete all instances of special processing for token ring")
Reported-by: syzbot+b5ad66046b913bc04c6f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b5ad66046b913bc04c6f
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240119015515.61898-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When I run syz's reproduction C program locally, it causes the following
issue:
pvqspinlock: lock 0xffff9d181cd5c660 has corrupted value 0x0!
WARNING: CPU: 19 PID: 21160 at __pv_queued_spin_unlock_slowpath (kernel/locking/qspinlock_paravirt.h:508)
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:__pv_queued_spin_unlock_slowpath (kernel/locking/qspinlock_paravirt.h:508)
Code: 73 56 3a ff 90 c3 cc cc cc cc 8b 05 bb 1f 48 01 85 c0 74 05 c3 cc cc cc cc 8b 17 48 89 fe 48 c7 c7
30 20 ce 8f e8 ad 56 42 ff <0f> 0b c3 cc cc cc cc 0f 0b 0f 1f 40 00 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffa8d200604cb8 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9d1ef60e0908
RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff9d1ef60e0900
RBP: ffff9d181cd5c280 R08: 0000000000000000 R09: 00000000ffff7fff
R10: ffffa8d200604b68 R11: ffffffff907dcdc8 R12: 0000000000000000
R13: ffff9d181cd5c660 R14: ffff9d1813a3f330 R15: 0000000000001000
FS: 00007fa110184640(0000) GS:ffff9d1ef60c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000000 CR3: 000000011f65e000 CR4: 00000000000006f0
Call Trace:
<IRQ>
_raw_spin_unlock (kernel/locking/spinlock.c:186)
inet_csk_reqsk_queue_add (net/ipv4/inet_connection_sock.c:1321)
inet_csk_complete_hashdance (net/ipv4/inet_connection_sock.c:1358)
tcp_check_req (net/ipv4/tcp_minisocks.c:868)
tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2260)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205)
ip_local_deliver_finish (net/ipv4/ip_input.c:234)
__netif_receive_skb_one_core (net/core/dev.c:5529)
process_backlog (./include/linux/rcupdate.h:779)
__napi_poll (net/core/dev.c:6533)
net_rx_action (net/core/dev.c:6604)
__do_softirq (./arch/x86/include/asm/jump_label.h:27)
do_softirq (kernel/softirq.c:454 kernel/softirq.c:441)
</IRQ>
<TASK>
__local_bh_enable_ip (kernel/softirq.c:381)
__dev_queue_xmit (net/core/dev.c:4374)
ip_finish_output2 (./include/net/neighbour.h:540 net/ipv4/ip_output.c:235)
__ip_queue_xmit (net/ipv4/ip_output.c:535)
__tcp_transmit_skb (net/ipv4/tcp_output.c:1462)
tcp_rcv_synsent_state_process (net/ipv4/tcp_input.c:6469)
tcp_rcv_state_process (net/ipv4/tcp_input.c:6657)
tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1929)
__release_sock (./include/net/sock.h:1121 net/core/sock.c:2968)
release_sock (net/core/sock.c:3536)
inet_wait_for_connect (net/ipv4/af_inet.c:609)
__inet_stream_connect (net/ipv4/af_inet.c:702)
inet_stream_connect (net/ipv4/af_inet.c:748)
__sys_connect (./include/linux/file.h:45 net/socket.c:2064)
__x64_sys_connect (net/socket.c:2073 net/socket.c:2070 net/socket.c:2070)
do_syscall_64 (arch/x86/entry/common.c:51 arch/x86/entry/common.c:82)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129)
RIP: 0033:0x7fa10ff05a3d
Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89
c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ab a3 0e 00 f7 d8 64 89 01 48
RSP: 002b:00007fa110183de8 EFLAGS: 00000202 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000020000054 RCX: 00007fa10ff05a3d
RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000003
RBP: 00007fa110183e20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 00007fa110184640
R13: 0000000000000000 R14: 00007fa10fe8b060 R15: 00007fff73e23b20
</TASK>
The issue triggering process is analyzed as follows:
Thread A Thread B
tcp_v4_rcv //receive ack TCP packet inet_shutdown
tcp_check_req tcp_disconnect //disconnect sock
... tcp_set_state(sk, TCP_CLOSE)
inet_csk_complete_hashdance ...
inet_csk_reqsk_queue_add inet_listen //start listen
spin_lock(&queue->rskq_lock) inet_csk_listen_start
... reqsk_queue_alloc
... spin_lock_init
spin_unlock(&queue->rskq_lock) //warning
When the socket receives the ACK packet during the three-way handshake,
it will hold spinlock. And then the user actively shutdowns the socket
and listens to the socket immediately, the spinlock will be initialized.
When the socket is going to release the spinlock, a warning is generated.
Also the same issue to fastopenq.lock.
Move init spinlock to inet_create and inet_accept to make sure init the
accept_queue's spinlocks once.
Fixes: fff1f3001cc5 ("tcp: add a spinlock to protect struct request_sock_queue")
Fixes: 168a8f58059a ("tcp: TCP Fast Open Server - main code path")
Reported-by: Ming Shu <sming56@aliyun.com>
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240118012019.1751966-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull strlcpy removal from Kees Cook:
"As promised, this is 'part 2' of the hardening tree, late in -rc1 now
that all the other trees with strlcpy() removals have landed. One new
user appeared (in bcachefs) but was a trivial refactor. The kernel is
now free of the strlcpy() API!
- Remove of the final (very recent) user of strlcpy() (in bcachefs)
- Remove the strlcpy() API. Long live strscpy()"
* tag 'strlcpy-removal-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
string: Remove strlcpy()
bcachefs: Replace strlcpy() with strscpy()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree header detangling from Rob Herring:
"Remove the circular including of of_device.h and of_platform.h along
with all of their implicit includes.
This is the culmination of several kernel cycles worth of fixing
implicit DT includes throughout the tree"
* tag 'devicetree-for-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: Stop circularly including of_device.h and of_platform.h
clk: qcom: gcc-x1e80100: Replace of_device.h with explicit includes
thermal: loongson2: Replace of_device.h with explicit includes
net: can: Use device_get_match_data()
sparc: Use device_get_match_data()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes:
- Lots of ASoC SOF fixes and related reworks
- ASoC TAS codec fixes including DT updates
- A few HD-audio quirks and regression fixes
- Minor fixes for aloop, oxygen and scarlett2 mixer"
* tag 'sound-fix-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: hda/realtek: Enable headset mic on Lenovo M70 Gen5
ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on HP ZBook
ALSA: hda/relatek: Enable Mute LED on HP Laptop 15s-fq2xxx
ASoC: SOF: ipc4-loader: remove the CPC check warnings
ASoC: SOF: ipc4-pcm: remove log message for LLP
ALSA: hda: generic: Remove obsolete call to ledtrig_audio_get
ALSA: scarlett2: Fix yet more -Wformat-truncation warnings
ALSA: hda: Properly setup HDMI stream
ASoC: audio-graph-card2: fix index check on graph_parse_node_multi_nm()
ASoC: SOF: icp3-dtrace: Revert "Fix wrong kfree() usage"
ALSA: oxygen: Fix right channel of capture volume mixer
ALSA: aloop: Introduce a function to get if access is interleaved mode
ASoC: mediatek: sof-common: Add NULL check for normal_link string
ASoC: mediatek: mt8195: Remove afe-dai component and rework codec link
ASoC: mediatek: mt8192: Check existence of dai_name before dereferencing
ASoC: Intel: bxt_rt298: Fix kernel ops due to COMP_DUMMY change
ASoC: Intel: bxt_da7219_max98357a: Fix kernel ops due to COMP_DUMMY change
ASoC: codecs: rtq9128: Fix TDM enable and DAI format control flow
ASoC: codecs: rtq9128: Fix PM_RUNTIME usage
ASoC: tas2781: Add tas2563 into driver
...
|
|
With all the users of strlcpy() removed[1] from the kernel, remove the
API, self-tests, and other references. Leave mentions in Documentation
(about its deprecation), and in checkpatch.pl (to help migrate host-only
tools/ usage). Long live strscpy().
Link: https://github.com/KSPP/linux/issues/89 [1]
Cc: Azeem Shaikh <azeemshaikh38@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: linux-hardening@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"New features:
- bq24190: Add support for BQ24296 charger
Cleanups:
- all reset drivers: Stop using module_platform_driver_probe()
- gpio-restart: use devm_register_sys_off_handler
- pwr-mlxbf: support graceful reboot
- cw2015: correct time_to_empty units
- qcom-battmgr: Fix driver initialization sequence
- bq27xxx: Start/Stop delayed work in suspend/resume
- minor cleanups and fixes"
* tag 'for-v6.8-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (33 commits)
power: supply: bq24190_charger: Fix "initializer element is not constant" error
power: supply: bq24190_charger: Add support for BQ24296
dt-bindings: power: supply: bq24190: Add BQ24296 compatible
dt-bindings: power: reset: xilinx: Rename node names in examples
power: supply: qcom_battmgr: Register the power supplies after PDR is up
dt-bindings: power: reset: qcom-pon: fix inconsistent example
power: supply: Fix null pointer dereference in smb2_probe
power: reset: at91: Drop '__init' from at91_wakeup_status()
power: supply: Use multiple MODULE_AUTHOR statements
power: supply: Fix indentation and some other warnings
power: reset: gpio-restart: Use devm_register_sys_off_handler()
power: supply: bq256xx: fix some problem in bq256xx_hw_init
power: supply: cw2015: correct time_to_empty units in sysfs
power: reset: at91-sama5d2_shdwc: Convert to platform remove callback returning void
power: reset: at91-reset: Convert to platform remove callback returning void
power: reset: tps65086-restart: Convert to platform remove callback returning void
power: reset: syscon-poweroff: Convert to platform remove callback returning void
power: reset: rmobile-reset: Convert to platform remove callback returning void
power: reset: restart-poweroff: Convert to platform remove callback returning void
power: reset: regulator-poweroff: Convert to platform remove callback returning void
...
|
|
Pull ceph updates from Ilya Dryomov:
"Assorted CephFS fixes and cleanups with nothing standing out"
* tag 'ceph-for-6.8-rc1' of https://github.com/ceph/ceph-client:
ceph: get rid of passing callbacks in __dentry_leases_walk()
ceph: d_obtain_{alias,root}(ERR_PTR(...)) will do the right thing
ceph: fix invalid pointer access if get_quota_realm return ERR_PTR
ceph: remove duplicated code in ceph_netfs_issue_read()
ceph: send oldest_client_tid when renewing caps
ceph: rename create_session_open_msg() to create_session_full_msg()
ceph: select FS_ENCRYPTION_ALGS if FS_ENCRYPTION
ceph: fix deadlock or deadcode of misusing dget()
ceph: try to allocate a smaller extent map for sparse read
libceph: remove MAX_EXTENTS check for sparse reads
ceph: reinitialize mds feature bit even when session in open
ceph: skip reconnecting if MDS is not ready
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
"This extends the netfs helper library that network filesystems can use
to replace their own implementations. Both afs and 9p are ported. cifs
is ready as well but the patches are way bigger and will be routed
separately once this is merged. That will remove lots of code as well.
The overal goal is to get high-level I/O and knowledge of the page
cache and ouf of the filesystem drivers. This includes knowledge about
the existence of pages and folios
The pull request converts afs and 9p. This removes about 800 lines of
code from afs and 300 from 9p. For 9p it is now possible to do writes
in larger than a page chunks. Additionally, multipage folio support
can be turned on for 9p. Separate patches exist for cifs removing
another 2000+ lines. I've included detailed information in the
individual pulls I took.
Summary:
- Add NFS-style (and Ceph-style) locking around DIO vs buffered I/O
calls to prevent these from happening at the same time.
- Support for direct and unbuffered I/O.
- Support for write-through caching in the page cache.
- O_*SYNC and RWF_*SYNC writes use write-through rather than writing
to the page cache and then flushing afterwards.
- Support for write-streaming.
- Support for write grouping.
- Skip reads for which the server could only return zeros or EOF.
- The fscache module is now part of the netfs library and the
corresponding maintainer entry is updated.
- Some helpers from the fscache subsystem are renamed to mark them as
belonging to the netfs library.
- Follow-up fixes for the netfs library.
- Follow-up fixes for the 9p conversion"
* tag 'vfs-6.8.netfs' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (50 commits)
netfs: Fix wrong #ifdef hiding wait
cachefiles: Fix signed/unsigned mixup
netfs: Fix the loop that unmarks folios after writing to the cache
netfs: Fix interaction between write-streaming and cachefiles culling
netfs: Count DIO writes
netfs: Mark netfs_unbuffered_write_iter_locked() static
netfs: Fix proc/fs/fscache symlink to point to "netfs" not "../netfs"
netfs: Rearrange netfs_io_subrequest to put request pointer first
9p: Use length of data written to the server in preference to error
9p: Do a couple of cleanups
9p: Fix initialisation of netfs_inode for 9p
cachefiles: Fix __cachefiles_prepare_write()
9p: Use netfslib read/write_iter
afs: Use the netfs write helpers
netfs: Export the netfs_sreq tracepoint
netfs: Optimise away reads above the point at which there can be no data
netfs: Implement a write-through caching option
netfs: Provide a launder_folio implementation
netfs: Provide a writepages implementation
netfs, cachefiles: Pass upper bound length to allow expansion
...
|
|
The DT of_device.h and of_platform.h headers date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. The headers also include
platform_device.h and of.h. The result was lots of drivers relied on
these implicit includes.
Now the entire tree has been fixed over the last couple of cycles to
explicitly include the necessary headers instead of relying on
of_device.h and/or of_platform.h implicit includes, so the implicit and
circular includes can finally be removed.
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- tcp, fc, and rdma target fixes (Maurizio, Daniel, Hannes,
Christoph)
- discard fixes and improvements (Christoph)
- timeout debug improvements (Keith, Max)
- various cleanups (Daniel, Max, Giuxen)
- trace event string fixes (Arnd)
- shadow doorbell setup on reset fix (William)
- a write zeroes quirk for SK Hynix (Jim)
- MD pull request via Song:
- Sparse warning since v6.0 (Bart)
- /proc/mdstat regression since v6.7 (Yu Kuai)
- Use symbolic error value (Christian)
- IO Priority documentation update (Christian)
- Fix for accessing queue limits without having entered the queue
(Christoph, me)
- Fix for loop dio support (Christoph)
- Move null_blk off deprecated ida interface (Christophe)
- Ensure nbd initializes full msghdr (Eric)
- Fix for a regression with the folio conversion, which is now easier
to hit because of an unrelated change (Matthew)
- Remove redundant check in virtio-blk (Li)
- Fix for a potential hang in sbitmap (Ming)
- Fix for partial zone appending (Damien)
- Misc changes and fixes (Bart, me, Kemeng, Dmitry)
* tag 'for-6.8/block-2024-01-18' of git://git.kernel.dk/linux: (45 commits)
Documentation: block: ioprio: Update schedulers
loop: fix the the direct I/O support check when used on top of block devices
blk-mq: Remove the hctx 'run' debugfs attribute
nbd: always initialize struct msghdr completely
block: Fix iterating over an empty bio with bio_for_each_folio_all
block: bio-integrity: fix kcalloc() arguments order
virtio_blk: remove duplicate check if queue is broken in virtblk_done
sbitmap: remove stale comment in sbq_calc_wake_batch
block: Correct a documentation comment in blk-cgroup.c
null_blk: Remove usage of the deprecated ida_simple_xx() API
block: ensure we hold a queue reference when using queue limits
blk-mq: rename blk_mq_can_use_cached_rq
block: print symbolic error name instead of error code
blk-mq: fix IO hang from sbitmap wakeup race
nvmet-rdma: avoid circular locking dependency on install_queue()
nvmet-tcp: avoid circular locking dependency on install_queue()
nvme-pci: set doorbell config before unquiescing
block: fix partial zone append completion handling in req_bio_endio()
block/iocost: silence warning on 'last_period' potentially being unused
md/raid1: Use blk_opf_t for read and write operations
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Make Kconfig parse the input .config more precisely
- Support W=c and W=e options for Kconfig
- Set Kconfig int/hex symbols to zero if the 'default' property is
missing
- Add .editorconfig
- Add scripts/git.orderFile
- Add a script to detect backward-incompatible changes in UAPI headers
- Resolve the symlink passed to O= option properly
- Use the user-supplied mtime for all files in the builtin initramfs,
which provides better reproducible builds
- Fix the direct execution of debian/rules for Debian package builds
- Use build ID instead of the .gnu_debuglink section for the Debian dbg
package
* tag 'kbuild-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (53 commits)
kbuild: deb-pkg: use debian/<package> for tmpdir
kbuild: deb-pkg: move 'make headers' to build-arch
kbuild: deb-pkg: do not search for 'scripts' directory under arch/
kbuild: deb-pkg: use build ID instead of debug link for dbg package
kbuild: deb-pkg: use more debhelper commands in builddeb
kbuild: deb-pkg: remove unneeded '-f $srctree/Makefile' in debian/rules
kbuild: deb-pkg: allow to run debian/rules from output directory
kbuild: deb-pkg: set DEB_* variables if debian/rules is directly executed
kbuild: deb-pkg: squash scripts/package/deb-build-option to debian/rules
kbuild: deb-pkg: factor out common Make options in debian/rules
kbuild: deb-pkg: hard-code Build-Depends
kbuild: deb-pkg: split debian/copyright from the mkdebian script
gen_init_cpio: Apply mtime supplied by user to all file types
kbuild: resolve symlinks for O= properly
docs: dev-tools: Add UAPI checker documentation
check-uapi: Introduce check-uapi.sh
scripts: Introduce a default git.orderFile
kconfig: WERROR unmet symbol dependency
Add .editorconfig file for basic formatting
kconfig: Use KCONFIG_CONFIG instead of .config
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Previous releases - regressions:
- Revert "net: rtnetlink: Enslave device before bringing it up",
breaks the case inverse to the one it was trying to fix
- net: dsa: fix oob access in DSA's netdevice event handler
dereference netdev_priv() before check its a DSA port
- sched: track device in tcf_block_get/put_ext() only for clsact
binder types
- net: tls, fix WARNING in __sk_msg_free when record becomes full
during splice and MORE hint set
- sfp-bus: fix SFP mode detect from bitrate
- drv: stmmac: prevent DSA tags from breaking COE
Previous releases - always broken:
- bpf: fix no forward progress in in bpf_iter_udp if output buffer is
too small
- bpf: reject variable offset alu on registers with a type of
PTR_TO_FLOW_KEYS to prevent oob access
- netfilter: tighten input validation
- net: add more sanity check in virtio_net_hdr_to_skb()
- rxrpc: fix use of Don't Fragment flag on RESPONSE packets, avoid
infinite loop
- amt: do not use the portion of skb->cb area which may get clobbered
- mptcp: improve validation of the MPTCPOPT_MP_JOIN MCTCP option
Misc:
- spring cleanup of inactive maintainers"
* tag 'net-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
i40e: Include types.h to some headers
ipv6: mcast: fix data-race in ipv6_mc_down / mld_ifc_work
selftests: mlxsw: qos_pfc: Adjust the test to support 8 lanes
selftests: mlxsw: qos_pfc: Remove wrong description
mlxsw: spectrum_router: Register netdevice notifier before nexthop
mlxsw: spectrum_acl_tcam: Fix stack corruption
mlxsw: spectrum_acl_tcam: Fix NULL pointer dereference in error path
mlxsw: spectrum_acl_erp: Fix error flow of pool allocation failure
ethtool: netlink: Add missing ethnl_ops_begin/complete
selftests: bonding: Add more missing config options
selftests: netdevsim: add a config file
libbpf: warn on unexpected __arg_ctx type when rewriting BTF
selftests/bpf: add tests confirming type logic in kernel for __arg_ctx
bpf: enforce types for __arg_ctx-tagged arguments in global subprogs
bpf: extract bpf_ctx_convert_map logic and make it more reusable
libbpf: feature-detect arg:ctx tag support in kernel
ipvs: avoid stat macros calls from preemptible context
netfilter: nf_tables: reject NFT_SET_CONCAT with not field length description
netfilter: nf_tables: skip dead set elements in netlink dump
netfilter: nf_tables: do not allow mismatch field size and set key length
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"This removes the currently unused CLASS_DDC support (controllers set
the flag, but there is no client to use it).
Also, CLASS_SPD support gets simplified to prepare removal in the
future. Class based instantiation is not recommended these days
anyhow.
Furthermore, I2C core now creates a debugfs directory per I2C adapter.
Current bus driver users were converted to use it.
Finally, quite some driver updates. Standing out are patches for the
wmt-driver which is refactored to support more variants.
This is the rebased pull request where a large series for the
designware driver was dropped"
* tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
MAINTAINERS: use proper email for my I2C work
i2c: stm32f7: add support for stm32mp25 soc
i2c: stm32f7: perform I2C_ISR read once at beginning of event isr
dt-bindings: i2c: document st,stm32mp25-i2c compatible
i2c: stm32f7: simplify status messages in case of errors
i2c: stm32f7: perform most of irq job in threaded handler
i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq
i2c: i801: Add lis3lv02d for Dell XPS 15 7590
i2c: i801: Add lis3lv02d for Dell Precision 3540
i2c: wmt: Reduce redundant: REG_CR setting
i2c: wmt: Reduce redundant: function parameter
i2c: wmt: Reduce redundant: clock mode setting
i2c: wmt: Reduce redundant: wait event complete
i2c: wmt: Reduce redundant: bus busy check
i2c: mux: reg: Remove class-based device auto-detection support
i2c: make i2c_bus_type const
dt-bindings: at24: add ROHM BR24G04
eeprom: at24: use of_match_ptr()
i2c: cpm: Remove linux,i2c-index conversion from be32
i2c: imx: Make SDA actually optional for bus recovering
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"There are three new drivers this cycle. Also the cmos driver is
getting fixes for longstanding wakeup issues on AMD.
New drivers:
- Analog Devices MAX31335
- Nuvoton ma35d1
- Texas Instrument TPS6594 PMIC RTC
Drivers:
- cmos: use ACPI alarm instead of HPET on recent AMD platforms
- nuvoton: add NCT3015Y-R and NCT3018Y-R support
- rv8803: proper suspend/resume and wakeup-source support"
* tag 'rtc-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (26 commits)
rtc: nuvoton: Compatible with NCT3015Y-R and NCT3018Y-R
rtc: da9063: Use dev_err_probe()
rtc: da9063: Use device_get_match_data()
rtc: da9063: Make IRQ as optional
rtc: max31335: Fix comparison in max31335_volatile_reg()
rtc: max31335: use regmap_update_bits_check
rtc: max31335: remove unecessary locking
rtc: max31335: add driver support
dt-bindings: rtc: max31335: add max31335 bindings
rtc: rv8803: add wakeup-source support
rtc: ac100: remove misuses of kernel-doc
rtc: class: Remove usage of the deprecated ida_simple_xx() API
rtc: MAINTAINERS: drop Alessandro Zummo
rtc: ma35d1: remove hardcoded UIE support
dt-bindings: rtc: qcom-pm8xxx: fix inconsistent example
rtc: rv8803: Add power management support
rtc: ds3232: avoid unused-const-variable warning
rtc: lpc24xx: add missing dependency
rtc: tps6594: Add driver for TPS6594 RTC
rtc: Add driver for Nuvoton ma35d1 rtc controller
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a new driver for Adafruit Seesaw gamepad device
- Zforce touchscreen will handle standard device properties for axis
swap/inversion
- handling of advanced sensitivity settings in Microchip CAP11xx
capacitive sensor driver
- more drivers have been converted to use newer gpiod API
- support for dedicated wakeup IRQs in gpio-keys dirver
- support for slider gestures and OTP variants in iqs269a driver
- atkbd will report keyboard version as 0xab83 in cases when GET ID
command was skipped (to deal with problematic firmware on newer
laptops), restoring the previous behavior
- other assorted cleanups and changes
* tag 'input-for-v6.8-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits)
Input: atkbd - use ab83 as id when skipping the getid command
Input: driver for Adafruit Seesaw Gamepad
dt-bindings: input: bindings for Adafruit Seesaw Gamepad
Input: da9063_onkey - avoid explicitly setting input's parent
Input: da9063_onkey - avoid using OF-specific APIs
Input: iqs269a - add support for OTP variants
dt-bindings: input: iqs269a: Add bindings for OTP variants
Input: iqs269a - add support for slider gestures
dt-bindings: input: iqs269a: Add bindings for slider gestures
Input: gpio-keys - filter gpio_keys -EPROBE_DEFER error messages
Input: zforce_ts - accept standard touchscreen properties
dt-bindings: touchscreen: neonode,zforce: Use standard properties
dt-bindings: touchscreen: convert neonode,zforce to json-schema
dt-bindings: input: convert drv266x to json-schema
Input: da9063 - use dev_err_probe()
Input: da9063 - drop redundant prints in probe()
Input: da9063 - simplify obtaining OF match data
Input: as5011 - convert to GPIO descriptor
Input: omap-keypad - drop optional GPIO support
Input: tca6416-keypad - drop unused include
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Core: add concept of controller_id to deal with clear Controller /
Manager hierarchy
- bunch of qcom driver refactoring for qcom_swrm_stream_alloc_ports(),
qcom_swrm_stream_alloc_ports() and setting controller id to hw master
id
* tag 'soundwire-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: drop bus freq calculation and set 'max_clk_freq'
soundwire: generic_bandwidth_allocation use bus->params.max_dr_freq
soundwire: qcom: set controller id to hw master id
soundwire: fix initializing sysfs for same devices on different buses
soundwire: bus: introduce controller_id
soundwire: stream: constify sdw_port_config when adding devices
soundwire: qcom: move sconfig in qcom_swrm_stream_alloc_ports() out of critical section
soundwire: qcom: drop unneeded qcom_swrm_stream_alloc_ports() cleanup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Apart from some regular driver fixes there's a relatively big revert
of the locking changes that were introduced to GPIOLIB in this merge
window.
This is because it turned out that some legacy GPIO interfaces - that
need to translate a number from the global GPIO numberspace to the
address of the relevant descriptor, thus running a GPIO device lookup
and taking the GPIO device list lock - are still used in old code from
atomic context resulting in "scheduling while atomic" errors.
I'll try to make the read-only part of the list access entirely
lockless using SRCU but this will take some time so let's go back to
the old global spinlock for now.
Summary:
- revert the changes aiming to use a read-write semaphore to protect
the list of GPIO devices due to calls to legacy API taking that
lock from atomic context in old code
- fix inverted logic in DEFINE_FREE() for GPIO device references
- check the return value of bgpio_init() in gpio-mlxbf3
- fix node address in the DT bindings example for gpio-xilinx
- fix signedness bug in gpio-rtd
- fix kernel-doc warnings in gpio-en7523"
* tag 'gpio-fixes-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: revert the attempt to protect the GPIO device list with an rwsem
gpio: EN7523: fix kernel-doc warnings
gpiolib: Fix scope-based gpio_device refcounting
gpio: mlxbf3: add an error code check in mlxbf3_gpio_probe
dt-bindings: gpio: xilinx: Fix node address in gpio
gpio: rtd: Fix signedness bug in probe
|
