| Age | Commit message (Collapse) | Author |
|---|
|
* for-next/perf:
drivers/perf: hisi: Update HiSilicon PMU maintainers
arm_pmu: acpi: Add a representative platform device for TRBE
arm_pmu: acpi: Refactor arm_spe_acpi_register_device()
hw_breakpoint: fix single-stepping when using bpf_overflow_handler
perf/imx_ddr: don't enable counter0 if none of 4 counters are used
perf/imx_ddr: speed up overflow frequency of cycle
drivers/perf: hisi: Schedule perf session according to locality
perf/arm-dmc620: Fix dmc620_pmu_irqs_lock/cpu_hotplug_lock circular lock dependency
perf/smmuv3: Add MODULE_ALIAS for module auto loading
perf/smmuv3: Enable HiSilicon Erratum 162001900 quirk for HIP08/09
perf: pmuv3: Remove comments from armv8pmu_[enable|disable]_event()
perf/arm-cmn: Add CMN-700 r3 support
perf/arm-cmn: Refactor HN-F event selector macros
perf/arm-cmn: Remove spurious event aliases
drivers/perf: Explicitly include correct DT includes
perf: pmuv3: Add Cortex A520, A715, A720, X3 and X4 PMUs
dt-bindings: arm: pmu: Add Cortex A520, A715, A720, X3, and X4
perf/smmuv3: Remove build dependency on ACPI
perf: xgene_pmu: Convert to devm_platform_ioremap_resource()
driver/perf: Add identifier sysfs file for Yitian 710 DDR
|
|
To support the need for host specific tuning for SD high-speed mode, let's
add two new optional callbacks, ->prepare|execute_sd_hs_tuning() and let's
call them when switching into the SD high-speed mode.
Note that, during the tuning process it's also needed for host drivers to
send commands to the SD card to verify that the tuning process succeeds.
Therefore, let's also share the corresponding functions from the core to
allow this.
Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Link: https://lore.kernel.org/r/20230825091743.15613-2-wenchao.chen@unisoc.com
[Ulf: Dropped unnecessary function declarations and updated the commit msg]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix ring buffer being permanently disabled due to missed
record_disabled()
Changing the trace cpu mask will disable the ring buffers for the
CPUs no longer in the mask. But it fails to update the snapshot
buffer. If a snapshot takes place, the accounting for the ring buffer
being disabled is corrupted and this can lead to the ring buffer
being permanently disabled.
- Add test case for snapshot and cpu mask working together
- Fix memleak by the function graph tracer not getting closed properly.
The iterator is used to read the ring buffer. When it opens, it calls
the open function of a tracer, and when it is closed, it calls the
close iteration. While a trace is being read, it is still possible to
change the tracer.
If this happens between the function graph tracer and the wakeup
tracer (which uses function graph tracing), the tracers are not
closed properly during when the iterator sees the switch, and the
wakeup function did not initialize its private pointer to NULL, which
is used to know if the function graph tracer was the last tracer. It
could be fooled in thinking it is, but then on exit it does not call
the close function of the function graph tracer to clean up its data.
- Fix synthetic events on big endian machines, by introducing a union
that does the conversions properly.
- Fix synthetic events from printing out the number of elements in the
stacktrace when it shouldn't.
- Fix synthetic events stacktrace to not print a bogus value at the
end.
- Introduce a pipe_cpumask that prevents the trace_pipe files from
being opened by more than one task (file descriptor).
There was a race found where if splice is called, the iter->ent could
become stale and events could be missed. There's no point reading a
producer/consumer file by more than one task as they will corrupt
each other anyway. Add a cpumask that keeps track of the per_cpu
trace_pipe files as well as the global trace_pipe file that prevents
more than one open of a trace_pipe file that represents the same ring
buffer. This prevents the race from happening.
- Fix ftrace samples for arm64 to work with older compilers.
* tag 'trace-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
samples: ftrace: Replace bti assembly with hint for older compiler
tracing: Introduce pipe_cpumask to avoid race on trace_pipes
tracing: Fix memleak due to race between current_tracer and trace
tracing/synthetic: Allocate one additional element for size
tracing/synthetic: Skip first entry for stack traces
tracing/synthetic: Use union instead of casts
selftests/ftrace: Add a basic testcase for snapshot
tracing: Fix cpu buffers unavailable due to 'record_disabled' missed
|
|
The raid_component_add() function was added to the kernel tree via patch
"[SCSI] embryonic RAID class" (2005). Remove this function since it never
has had any callers in the Linux kernel. And also raid_component_release()
is only used in raid_component_add(), so it is also removed.
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Link: https://lore.kernel.org/r/20230822015254.184270-1-wangzhu9@huawei.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Fixes: 04b5b5cb0136 ("scsi: core: Fix possible memory leak if device_add() fails")
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix power consumption at s2idle on DG2 (Anshuman)
- Fix documentation build warning (Jani)
- Fix Display HPD (Imre)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZOdPRFSJpo0ErPX/@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A samsung-dsim initialization fix, a devfreq fix for panfrost, a DP DSC
define fix, a recursive lock fix for dma-buf, a shader validation fix
and a reference counting fix for vmwgfx
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/amy26vu5xbeeikswpx7nt6rddwfocdidshrtt2qovipihx5poj@y45p3dtzrloc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wifi, can and netfilter.
Fixes to fixes:
- nf_tables:
- GC transaction race with abort path
- defer gc run if previous batch is still pending
Previous releases - regressions:
- ipv4: fix data-races around inet->inet_id
- phy: fix deadlocking in phy_error() invocation
- mdio: fix C45 read/write protocol
- ipvlan: fix a reference count leak warning in ipvlan_ns_exit()
- ice: fix NULL pointer deref during VF reset
- i40e: fix potential NULL pointer dereferencing of pf->vf in
i40e_sync_vsi_filters()
- tg3: use slab_build_skb() when needed
- mtk_eth_soc: fix NULL pointer on hw reset
Previous releases - always broken:
- core: validate veth and vxcan peer ifindexes
- sched: fix a qdisc modification with ambiguous command request
- devlink: add missing unregister linecard notification
- wifi: mac80211: limit reorder_buf_filtered to avoid UBSAN warning
- batman:
- do not get eth header before batadv_check_management_packet
- fix batadv_v_ogm_aggr_send memory leak
- bonding: fix macvlan over alb bond support
- mlxsw: set time stamp fields also when its type is MIRROR_UTC"
* tag 'net-6.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
selftests: bonding: add macvlan over bond testing
selftest: bond: add new topo bond_topo_2d1c.sh
bonding: fix macvlan over alb bond support
rtnetlink: Reject negative ifindexes in RTM_NEWLINK
netfilter: nf_tables: defer gc run if previous batch is still pending
netfilter: nf_tables: fix out of memory error handling
netfilter: nf_tables: use correct lock to protect gc_list
netfilter: nf_tables: GC transaction race with abort path
netfilter: nf_tables: flush pending destroy work before netlink notifier
netfilter: nf_tables: validate all pending tables
ibmveth: Use dcbf rather than dcbfl
i40e: fix potential NULL pointer dereferencing of pf->vf i40e_sync_vsi_filters()
net/sched: fix a qdisc modification with ambiguous command request
igc: Fix the typo in the PTM Control macro
batman-adv: Hold rtnl lock during MTU update via netlink
igb: Avoid starting unnecessary workqueues
can: raw: add missing refcount for memory leak fix
can: isotp: fix support for transmission of SF without flow control
bnx2x: new flag for track HW resource allocation
sfc: allocate a big enough SKB for loopback selftest packet
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter updates for net
This PR contains nf_tables updates for your *net* tree.
First patch fixes table validation, I broke this in 6.4 when tracking
validation state per table, reported by Pablo, fixup from myself.
Second patch makes sure objects waiting for memory release have been
released, this was broken in 6.1, patch from Pablo Neira Ayuso.
Patch three is a fix-for-fix from previous PR: In case a transaction
gets aborted, gc sequence counter needs to be incremented so pending
gc requests are invalidated, from Pablo.
Same for patch 4: gc list needs to use gc list lock, not destroy lock,
also from Pablo.
Patch 5 fixes a UaF in a set backend, but this should only occur when
failslab is enabled for GFP_KERNEL allocations, broken since feature
was added in 5.6, from myself.
Patch 6 fixes a double-free bug that was also added via previous PR:
We must not schedule gc work if the previous batch is still queued.
netfilter pull request 2023-08-23
* tag 'nf-23-08-23' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: defer gc run if previous batch is still pending
netfilter: nf_tables: fix out of memory error handling
netfilter: nf_tables: use correct lock to protect gc_list
netfilter: nf_tables: GC transaction race with abort path
netfilter: nf_tables: flush pending destroy work before netlink notifier
netfilter: nf_tables: validate all pending tables
====================
Link: https://lore.kernel.org/r/20230823152711.15279-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The commit 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode
bonds") aims to enable the use of macvlans on top of rlb bond mode. However,
the current rlb bond mode only handles ARP packets to update remote neighbor
entries. This causes an issue when a macvlan is on top of the bond, and
remote devices send packets to the macvlan using the bond's MAC address
as the destination. After delivering the packets to the macvlan, the macvlan
will rejects them as the MAC address is incorrect. Consequently, this commit
makes macvlan over bond non-functional.
To address this problem, one potential solution is to check for the presence
of a macvlan port on the bond device using netif_is_macvlan_port(bond->dev)
and return NULL in the rlb_arp_xmit() function. However, this approach
doesn't fully resolve the situation when a VLAN exists between the bond and
macvlan.
So let's just do a partial revert for commit 14af9963ba1e in rlb_arp_xmit().
As the comment said, Don't modify or load balance ARPs that do not originate
locally.
Fixes: 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds")
Reported-by: susan.zheng@veritas.com
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2117816
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a helper to reschedule drm_mode_config::output_poll_work after
polling has been enabled for a connector (and needing a reschedule,
since previously polling was disabled for all connectors and hence
output_poll_work was not running).
This is needed by the next patch fixing HPD polling on i915.
CC: stable@vger.kernel.org # 6.4+
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230822113015.41224-1-imre.deak@intel.com
(cherry picked from commit fe2352fd64029918174de4b460dfe6df0c6911cd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
It's a straight-forward conversion and no logic changes (except that
it renames the corresponding tracepoint.)
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230817083942.103303-1-hsiangkao@linux.alibaba.com
|
|
Don't queue more gc work, else we may queue the same elements multiple
times.
If an element is flagged as dead, this can mean that either the previous
gc request was invalidated/discarded by a transaction or that the previous
request is still pending in the system work queue.
The latter will happen if the gc interval is set to a very low value,
e.g. 1ms, and system work queue is backlogged.
The sets refcount is 1 if no previous gc requeusts are queued, so add
a helper for this and skip gc run if old requests are pending.
Add a helper for this and skip the gc run in this case.
Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
We have to validate all tables in the transaction that are in
VALIDATE_DO state, the blamed commit below did not move the break
statement to its right location so we only validate one table.
Moreover, we can't init table->validate to _SKIP when a table object
is allocated.
If we do, then if a transcaction creates a new table and then
fails the transaction, nfnetlink will loop and nft will hang until
user cancels the command.
Add back the pernet state as a place to stash the last state encountered.
This is either _DO (we hit an error during commit validation) or _SKIP
(transaction passed all checks).
Fixes: 00c320f9b755 ("netfilter: nf_tables: make validation state per table")
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
ssh://gitolite.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull filesystem freezing updates from Darrick Wong:
New code for 6.6:
* Allow the kernel to initiate a freeze of a filesystem. The kernel
and userspace can both hold a freeze on a filesystem at the same
time; the freeze is not lifted until /both/ holders lift it. This
will enable us to fix a longstanding bug in XFS online fsck.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Message-Id: <20230822182604.GB11286@frogsfrogsfrogs>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Back when set_fs() was a generic API for altering the address limit,
addr_limit_user_check() was a safety measure to prevent userspace being
able to issue syscalls with an unbound limit.
With the the removal of set_fs() as a generic API, the last user of
addr_limit_user_check() was removed in commit:
b5a5a01d8e9a44ec ("arm64: uaccess: remove addr_limit_user_check()")
... as since that commit, no architecture defines TIF_FSCHECK, and hence
addr_limit_user_check() always expands to nothing.
Remove addr_limit_user_check(), updating the comment in
exit_to_user_mode_prepare() to no longer refer to it. At the same time,
the comment is reworded to be a little more generic so as to cover
kmap_assert_nomap() in addition to lockdep_sys_exit().
No functional change.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230821163526.2319443-1-mark.rutland@arm.com
|
|
We've found two bugs here: NT_RISCV_VECTOR steps on NT_RISCV_CSR (which
is only for embedded), and we don't have vlenb in the core dumps. Given
that we've have a pair of bugs croup up as part of the GDB review we've
probably got other issues, so let's just cut this for 6.5 and get it
right.
Fixes: 0c59922c769a ("riscv: Add ptrace vector support")
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Link: https://lore.kernel.org/r/20230816155450.26200-2-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The valid values of policy.{min, max} should be between 'min' and 'max',
so use clamp() helper macro to makes cpufreq_verify_within_limits() easier
to follow.
Signed-off-by: Liao Chang <liaochang1@huawei.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On some platforms a device and its corresponding PM domain, may need to
remain powered-on during system wide suspend, to support various use cases.
For example, when the console_suspend_enabled flag is unset for a serial
controller, the corresponding device may need to remain powered on. Other
use cases exists too.
In fact, we already have the mechanism in the PM core to deal with these
kind of use cases. However, the current naming of the corresponding
functions/flags clearly suggests these should be use for system wakeup.
See device_wakeup_path(), device_set_wakeup_path and
dev->power.wakeup_path.
As a way to extend the use of the existing mechanism, let's introduce two
new helpers functions, device_awake_path() and device_set_awake_path(). At
this point, let them act as wrappers of the existing functions. Ideally,
when all users have been converted to use the new helpers, we may decide to
drop the old ones and rename the flag.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
pm_runtime_update_max_time_suspended()
Commit 76e267d822f2 ("PM / Runtime: Remove device fields related to
suspend time, v2") left behind this.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Two fixes:
- reorder buffer filter checks can cause bad shift/UBSAN
warning with newer HW, avoid the check (mac80211)
- add Kconfig dependency for iwlwifi for PTP clock usage
* tag 'wireless-2023-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: limit reorder_buf_filtered to avoid UBSAN warning
wifi: iwlwifi: mvm: add dependency for PTP clock
====================
Link: https://lore.kernel.org/r/20230822124206.43926-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Xen provides support for injecting interrupts to the guests via the
HYPERVISOR_dm_op() hypercall. The same is used by the Virtio based
device backend implementations, in an inefficient manner currently.
Generally, the Virtio backends are implemented to work with the Eventfd
based mechanism. In order to make such backends work with Xen, another
software layer needs to poll the Eventfds and raise an interrupt to the
guest using the Xen based mechanism. This results in an extra context
switch.
This is not a new problem in Linux though. It is present with other
hypervisors like KVM, etc. as well. The generic solution implemented in
the kernel for them is to provide an IOCTL call to pass the interrupt
details and eventfd, which lets the kernel take care of polling the
eventfd and raising of the interrupt, instead of handling this in user
space (which involves an extra context switch).
This patch adds support to inject a specific interrupt to guest using
the eventfd mechanism, by preventing the extra context switch.
Inspired by existing implementations for KVM, etc..
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/8e724ac1f50c2bc1eb8da9b3ff6166f1372570aa.1692697321.git.viresh.kumar@linaro.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Instead of bypassing the kernel's adaptation layer for performing EFI
runtime calls, wire up ACPI PRM handling into it. This means these calls
can no longer occur concurrently with EFI runtime calls, and will be
made from the EFI runtime workqueue. It also means any page faults
occurring during PRM handling will be identified correctly as
originating in firmware code.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Avoid duplicating the EFI arch setup and teardown routine calls numerous
times in efi_call_rts(). Instead, expand the efi_call_virt_pointer()
macro into efi_call_rts(), taking the pre and post parts out of the
switch.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
__efi_call_virt() exists as an alternative for efi_call_virt() for the
sole reason that ResetSystem() returns void, and so we cannot use a call
to it in the RHS of an assignment.
Given that there is only a single user, let's drop the macro, and expand
it into the caller. That way, the remaining macro can be tightened
somewhat in terms of type safety too.
Note that the use of typeof() on the runtime service invocation does not
result in an actual call being made, but it does require a few pointer
types to be fixed up and converted into the proper function pointer
prototypes.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
DP DSC Receiver Capabilities are exposed via DPCD 60h-6Fh.
Fix the DSC RECEIVER CAP SIZE accordingly.
Fixes: ffddc4363c28 ("drm/dp: Add DP DSC DPCD receiver capability size define and missing SHIFT")
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818044436.177806-1-ankit.k.nautiyal@intel.com
|
|
walk_page_range() and friends often operate under write-locked mmap_lock.
With introduction of vma locks, the vmas have to be locked as well during
such walks to prevent concurrent page faults in these areas. Add an
additional member to mm_walk_ops to indicate locking requirements for the
walk.
The change ensures that page walks which prevent concurrent page faults
by write-locking mmap_lock, operate correctly after introduction of
per-vma locks. With per-vma locks page faults can be handled under vma
lock without taking mmap_lock at all, so write locking mmap_lock would
not stop them. The change ensures vmas are properly locked during such
walks.
A sample issue this solves is do_mbind() performing queue_pages_range()
to queue pages for migration. Without this change a concurrent page
can be faulted into the area and be left out of migration.
Link: https://lkml.kernel.org/r/20230804152724.3090321-2-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Suggested-by: Jann Horn <jannh@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We shouldn't be using a GUP-internal helper if it can be avoided.
Similar to smaps_pte_entry() that uses vm_normal_page(), let's use
vm_normal_page_pmd() that similarly refuses to return the huge zeropage.
In contrast to follow_trans_huge_pmd(), vm_normal_page_pmd():
(1) Will always return the head page, not a tail page of a THP.
If we'd ever call smaps_account with a tail page while setting "compound
= true", we could be in trouble, because smaps_account() would look at
the memmap of unrelated pages.
If we're unlucky, that memmap does not exist at all. Before we removed
PG_doublemap, we could have triggered something similar as in
commit 24d7275ce279 ("fs/proc: task_mmu.c: don't read mapcount for
migration entry").
This can theoretically happen ever since commit ff9f47f6f00c ("mm: proc:
smaps_rollup: do not stall write attempts on mmap_lock"):
(a) We're in show_smaps_rollup() and processed a VMA
(b) We release the mmap lock in show_smaps_rollup() because it is
contended
(c) We merged that VMA with another VMA
(d) We collapsed a THP in that merged VMA at that position
If the end address of the original VMA falls into the middle of a THP
area, we would call smap_gather_stats() with a start address that falls
into a PMD-mapped THP. It's probably very rare to trigger when not
really forced.
(2) Will succeed on a is_pci_p2pdma_page(), like vm_normal_page()
Treat such PMDs here just like smaps_pte_entry() would treat such PTEs.
If such pages would be anonymous, we most certainly would want to
account them.
(3) Will skip over pmd_devmap(), like vm_normal_page() for pte_devmap()
As noted in vm_normal_page(), that is only for handling legacy ZONE_DEVICE
pages. So just like smaps_pte_entry(), we'll now also ignore such PMD
entries.
Especially, follow_pmd_mask() never ends up calling
follow_trans_huge_pmd() on pmd_devmap(). Instead it calls
follow_devmap_pmd() -- which will fail if neither FOLL_GET nor FOLL_PIN
is set.
So skipping pmd_devmap() pages seems to be the right thing to do.
(4) Will properly handle VM_MIXEDMAP/VM_PFNMAP, like vm_normal_page()
We won't be returning a memmap that should be ignored by core-mm, or
worse, a memmap that does not even exist. Note that while
walk_page_range() will skip VM_PFNMAP mappings, walk_page_vma() won't.
Most probably this case doesn't currently really happen on the PMD level,
otherwise we'd already be able to trigger kernel crashes when reading
smaps / smaps_rollup.
So most probably only (1) is relevant in practice as of now, but could only
cause trouble in extreme corner cases.
Let's move follow_trans_huge_pmd() to mm/internal.h to discourage future
reuse in wrong context.
Link: https://lkml.kernel.org/r/20230803143208.383663-3-david@redhat.com
Fixes: ff9f47f6f00c ("mm: proc: smaps_rollup: do not stall write attempts on mmap_lock")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: liubo <liubo254@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Unfortunately commit 474098edac26 ("mm/gup: replace FOLL_NUMA by
gup_can_follow_protnone()") missed that follow_page() and
follow_trans_huge_pmd() never implicitly set FOLL_NUMA because they really
don't want to fail on PROT_NONE-mapped pages -- either due to NUMA hinting
or due to inaccessible (PROT_NONE) VMAs.
As spelled out in commit 0b9d705297b2 ("mm: numa: Support NUMA hinting
page faults from gup/gup_fast"): "Other follow_page callers like KSM
should not use FOLL_NUMA, or they would fail to get the pages if they use
follow_page instead of get_user_pages."
liubo reported [1] that smaps_rollup results are imprecise, because they
miss accounting of pages that are mapped PROT_NONE. Further, it's easy to
reproduce that KSM no longer works on inaccessible VMAs on x86-64, because
pte_protnone()/pmd_protnone() also indictaes "true" in inaccessible VMAs,
and follow_page() refuses to return such pages right now.
As KVM really depends on these NUMA hinting faults, removing the
pte_protnone()/pmd_protnone() handling in GUP code completely is not
really an option.
To fix the issues at hand, let's revive FOLL_NUMA as FOLL_HONOR_NUMA_FAULT
to restore the original behavior for now and add better comments.
Set FOLL_HONOR_NUMA_FAULT independent of FOLL_FORCE in
is_valid_gup_args(), to add that flag for all external GUP users.
Note that there are three GUP-internal __get_user_pages() users that don't
end up calling is_valid_gup_args() and consequently won't get
FOLL_HONOR_NUMA_FAULT set.
1) get_dump_page(): we really don't want to handle NUMA hinting
faults. It specifies FOLL_FORCE and wouldn't have honored NUMA
hinting faults already.
2) populate_vma_page_range(): we really don't want to handle NUMA hinting
faults. It specifies FOLL_FORCE on accessible VMAs, so it wouldn't have
honored NUMA hinting faults already.
3) faultin_vma_page_range(): we similarly don't want to handle NUMA
hinting faults.
To make the combination of FOLL_FORCE and FOLL_HONOR_NUMA_FAULT work in
inaccessible VMAs properly, we have to perform VMA accessibility checks in
gup_can_follow_protnone().
As GUP-fast should reject such pages either way in
pte_access_permitted()/pmd_access_permitted() -- for example on x86-64 and
arm64 that both implement pte_protnone() -- let's just always fallback to
ordinary GUP when stumbling over pte_protnone()/pmd_protnone().
As Linus notes [2], honoring NUMA faults might only make sense for
selected GUP users.
So we should really see if we can instead let relevant GUP callers specify
it manually, and not trigger NUMA hinting faults from GUP as default.
Prepare for that by making FOLL_HONOR_NUMA_FAULT an external GUP flag and
adding appropriate documenation.
While at it, remove a stale comment from follow_trans_huge_pmd(): That
comment for pmd_protnone() was added in commit 2b4847e73004 ("mm: numa:
serialise parallel get_user_page against THP migration"), which noted:
THP does not unmap pages due to a lack of support for migration
entries at a PMD level. This allows races with get_user_pages
Nowadays, we do have PMD migration entries, so the comment no longer
applies. Let's drop it.
[1] https://lore.kernel.org/r/20230726073409.631838-1-liubo254@huawei.com
[2] https://lore.kernel.org/r/CAHk-=wgRiP_9X0rRdZKT8nhemZGNateMtb366t37d8-x7VRs=g@mail.gmail.com
Link: https://lkml.kernel.org/r/20230803143208.383663-2-david@redhat.com
Fixes: 474098edac26 ("mm/gup: replace FOLL_NUMA by gup_can_follow_protnone()")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: liubo <liubo254@huawei.com>
Closes: https://lore.kernel.org/r/20230726073409.631838-1-liubo254@huawei.com
Reported-by: Peter Xu <peterx@redhat.com>
Closes: https://lore.kernel.org/all/ZMKJjDaqZ7FW0jfe@x1n/
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
atomic_t variables are currently used to implement reference counters
with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows and
underflows. This is important since overflows and underflows can lead
to use-after-free situation and be exploitable.
The variable nsproxy.count is used as pure reference counter. Convert it
to refcount_t and fix up the operations.
**Important note for maintainers:
Some functions from refcount_t API defined in refcount.h have different
memory ordering guarantees than their atomic counterparts. Please check
Documentation/core-api/refcount-vs-atomic.rst for more information.
Normally the differences should not matter since refcount_t provides
enough guarantees to satisfy the refcounting use cases, but in some
rare cases it might matter. Please double check that you don't have
some undocumented memory guarantees for this variable usage.
For the nsproxy.count it might make a difference in following places:
- put_nsproxy() and switch_task_namespaces(): decrement in
refcount_dec_and_test() only provides RELEASE ordering and ACQUIRE
ordering on success vs. fully ordered atomic counterpart
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230818041327.gonna.210-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Other parts of the kernel may use LPS0 constraints information to make
decisions on what power state to put a device into.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
[ rjw: Rewrite kerneldoc, rearrange if () statement, edit subject and
changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The `#ifdef` for acpi_register_lps0_dev() currently is guarded against
`CONFIG_X86`, but actually the functions contained in the block are
specifically sleep related functions.
Adjust the guard to also check for `CONFIG_SUSPEND`.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Recent rework moved block device closing out of sb->put_super() and into
sb->kill_sb() to avoid deadlocks as s_umount is held in put_super() and
blkdev_put() can end up taking s_umount again.
That means we need to move the removal of the superblock from @fs_supers
out of generic_shutdown_super() and into deactivate_locked_super() to
ensure that concurrent mounters don't fail to open block devices that
are still in use because blkdev_put() in sb->kill_sb() hasn't been
called yet.
We can now do this as we can make iterators through @fs_super and
@super_blocks wait without holding s_umount. Concurrent mounts will wait
until a dying superblock is fully dead so until sb->kill_sb() has been
called and SB_DEAD been set. Concurrent iterators can already discard
any SB_DYING superblock.
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230818-vfs-super-fixes-v3-v3-4-9f0b1876e46b@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Recent patches experiment with making it possible to allocate a new
superblock before opening the relevant block device. Naturally this has
intricate side-effects that we get to learn about while developing this.
Superblock allocators such as sget{_fc}() return with s_umount of the
new superblock held and lock ordering currently requires that block
level locks such as bdev_lock and open_mutex rank above s_umount.
Before aca740cecbe5 ("fs: open block device after superblock creation")
ordering was guaranteed to be correct as block devices were opened prior
to superblock allocation and thus s_umount wasn't held. But now s_umount
must be dropped before opening block devices to avoid locking
violations.
This has consequences. The main one being that iterators over
@super_blocks and @fs_supers that grab a temporary reference to the
superblock can now also grab s_umount before the caller has managed to
open block devices and called fill_super(). So whereas before such
iterators or concurrent mounts would have simply slept on s_umount until
SB_BORN was set or the superblock was discard due to initalization
failure they can now needlessly spin through sget{_fc}().
If the caller is sleeping on bdev_lock or open_mutex one caller waiting
on SB_BORN will always spin somewhere and potentially this can go on for
quite a while.
It should be possible to drop s_umount while allowing iterators to wait
on a nascent superblock to either be born or discarded. This patch
implements a wait_var_event() mechanism allowing iterators to sleep
until they are woken when the superblock is born or discarded.
This also allows us to avoid relooping through @fs_supers and
@super_blocks if a superblock isn't yet born or dying.
Link: aca740cecbe5 ("fs: open block device after superblock creation")
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The current code that marshalls the EFI runtime call arguments to hand
them off to a async helper does so in a type unsafe and slightly messy
manner - everything is cast to void* except for some integral types that
are passed by reference and dereferenced on the receiver end.
Let's clean this up a bit, and record the arguments of each runtime
service invocation exactly as they are issued, in a manner that permits
the compiler to check the types of the arguments at both ends.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
aio, io_uring, cachefiles and overlayfs, all open code an ugly variant
of file_{start,end}_write() to silence lockdep warnings.
Create helpers for this lockdep dance so we can use the helpers in all
the callers.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Message-Id: <20230817141337.1025891-4-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
and use sb_end_write() instead of open coded version.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Message-Id: <20230817141337.1025891-3-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Change legacy name master/slave to modern name host/target.
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230818093154.1183529-20-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Change legacy name master/slave to modern name host/target or controller.
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230818093154.1183529-8-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The v0 extent item has been deprecated for a long time, and we don't have
any report from the community either.
So it's time to remove the v0 extent specific error handling, and just
treat them as regular extent tree corruption.
This patch would remove the btrfs_print_v0_err() helper, and enhance the
involved error handling to treat them just as any extent tree
corruption. No reports regarding v0 extents have been seen since the
graceful handling was added in 2018.
This involves:
- btrfs_backref_add_tree_node()
This change is a little tricky, the new code is changed to only handle
BTRFS_TREE_BLOCK_REF_KEY and BTRFS_SHARED_BLOCK_REF_KEY.
But this is safe, as we have rejected any unknown inline refs through
btrfs_get_extent_inline_ref_type().
For keyed backrefs, we're safe to skip anything we don't know (that's
if it can pass tree-checker in the first place).
- btrfs_lookup_extent_info()
- lookup_inline_extent_backref()
- run_delayed_extent_op()
- __btrfs_free_extent()
- add_tree_block()
Regular error handling of unexpected extent tree item, and abort
transaction (if we have a trans handle).
- remove_extent_data_ref()
It's pretty much the same as the regular rejection of unknown backref
key.
But for this particular case, we can also remove a BUG_ON().
- extent_data_ref_count()
We can remove the BTRFS_EXTENT_REF_V0_KEY BUG_ON(), as it would be
rejected by the only caller.
- btrfs_print_leaf()
Remove the handling for BTRFS_EXTENT_REF_V0_KEY.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fold folio_account_redirty into folio_redirty_for_writepage now
that all other users except for the also unused account_page_redirty
wrapper are gone.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
After commit 6bfd0133bee2 ("btrfs: raid56: switch scrub path to use a
single function"), the raid56 implementation no longer uses different
endio functions for RMW/recover/scrub.
All read operations end in submit_read_wait_bio_list(), while all write
operations end in submit_write_bios(). This means quite some trace
events are out-of-date and no longer utilized.
This patch would unify the trace events into just two:
- trace_raid56_read()
Replaces trace_raid56_read_partial(), trace_raid56_scrub_read() and
trace_raid56_scrub_read_recover().
- trace_raid56_write()
Replaces trace_raid56_write_stripe() and
trace_raid56_scrub_write_stripe().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
get_super is unused now, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-17-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
BLKFLSBUF is a historic ioctl that is called on a file handle to a
block device and syncs either the file system mounted on that block
device if there is one, or otherwise the just the data on the block
device.
Replace the get_super based syncing with a holder operation to remove
the last usage of get_super, and to also support syncing the file system
if the block device is not the main block device stored in s_dev.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-16-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Combine the newly merged bdev_mark_dead helper with the existing
mark_dead holder operation so that all operations that invalidate
a device that is dead or being removed now go through the holder
ops. This allows file systems to explicitly shutdown either ASAP
(for a surprise removal) or after writing back data (for an orderly
removal), and do so not only for the main device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-15-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We currently have two interfaces that take a block_devices and the find
a mounted file systems to flush or invaldidate data on it. Both are a
bit problematic because they only work for the "main" block devices
that is used as s_dev for the super_block, and because they don't call
into the file system at all.
Merge the two into a new bdev_mark_dead helper that does both the
syncing and invalidation and which is properly documented. This is
in preparation of merging the functionality into the ->mark_dead
holder operation so that it will work on additional block devices
used by a file systems and give us a single entry point for invalidation
of dead devices or media.
Note that a single standalone fsync_bdev call for an obscure ioctl
remains for now, but that one will also be deal with in a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-14-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Hard code the events to DISK_EVENT_MEDIA_CHANGE as that is the only
useful use case, and drop the superfluous return value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-9-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The commit 06470f7468c8 ("mac80211: add API to allow filtering frames in BA sessions")
added reorder_buf_filtered to mark frames filtered by firmware, and it
can only work correctly if hw.max_rx_aggregation_subframes <= 64 since
it stores the bitmap in a u64 variable.
However, new HE or EHT devices can support BlockAck number up to 256 or
1024, and then using a higher subframe index leads UBSAN warning:
UBSAN: shift-out-of-bounds in net/mac80211/rx.c:1129:39
shift exponent 215 is too large for 64-bit type 'long long unsigned int'
Call Trace:
<IRQ>
dump_stack_lvl+0x48/0x70
dump_stack+0x10/0x20
__ubsan_handle_shift_out_of_bounds+0x1ac/0x360
ieee80211_release_reorder_frame.constprop.0.cold+0x64/0x69 [mac80211]
ieee80211_sta_reorder_release+0x9c/0x400 [mac80211]
ieee80211_prepare_and_rx_handle+0x1234/0x1420 [mac80211]
ieee80211_rx_list+0xaef/0xf60 [mac80211]
ieee80211_rx_napi+0x53/0xd0 [mac80211]
Since only old hardware that supports <=64 BlockAck uses
ieee80211_mark_rx_ba_filtered_frames(), limit the use as it is, so add a
WARN_ONCE() and comment to note to avoid using this function if hardware
capability is not suitable.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20230818014004.16177-1-pkshih@realtek.com
[edit commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Commit 67473b8194bc ("xen/events: Remove disfunct affinity spreading")
leave this unused declaration.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Rahul Singh <rahul.singh@arm.com>
Link: https://lore.kernel.org/r/20230801145413.40684-1-yuehaibing@huawei.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
UDP sendmsg() is lockless, so ip_select_ident_segs()
can very well be run from multiple cpus [1]
Convert inet->inet_id to an atomic_t, but implement
a dedicated path for TCP, avoiding cost of a locked
instruction (atomic_add_return())
Note that this patch will cause a trivial merge conflict
because we added inet->flags in net-next tree.
v2: added missing change in
drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c
(David Ahern)
[1]
BUG: KCSAN: data-race in __ip_make_skb / __ip_make_skb
read-write to 0xffff888145af952a of 2 bytes by task 7803 on cpu 1:
ip_select_ident_segs include/net/ip.h:542 [inline]
ip_select_ident include/net/ip.h:556 [inline]
__ip_make_skb+0x844/0xc70 net/ipv4/ip_output.c:1446
ip_make_skb+0x233/0x2c0 net/ipv4/ip_output.c:1560
udp_sendmsg+0x1199/0x1250 net/ipv4/udp.c:1260
inet_sendmsg+0x63/0x80 net/ipv4/af_inet.c:830
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg net/socket.c:748 [inline]
____sys_sendmsg+0x37c/0x4d0 net/socket.c:2494
___sys_sendmsg net/socket.c:2548 [inline]
__sys_sendmmsg+0x269/0x500 net/socket.c:2634
__do_sys_sendmmsg net/socket.c:2663 [inline]
__se_sys_sendmmsg net/socket.c:2660 [inline]
__x64_sys_sendmmsg+0x57/0x60 net/socket.c:2660
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff888145af952a of 2 bytes by task 7804 on cpu 0:
ip_select_ident_segs include/net/ip.h:541 [inline]
ip_select_ident include/net/ip.h:556 [inline]
__ip_make_skb+0x817/0xc70 net/ipv4/ip_output.c:1446
ip_make_skb+0x233/0x2c0 net/ipv4/ip_output.c:1560
udp_sendmsg+0x1199/0x1250 net/ipv4/udp.c:1260
inet_sendmsg+0x63/0x80 net/ipv4/af_inet.c:830
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg net/socket.c:748 [inline]
____sys_sendmsg+0x37c/0x4d0 net/socket.c:2494
___sys_sendmsg net/socket.c:2548 [inline]
__sys_sendmmsg+0x269/0x500 net/socket.c:2634
__do_sys_sendmmsg net/socket.c:2663 [inline]
__se_sys_sendmmsg net/socket.c:2660 [inline]
__x64_sys_sendmmsg+0x57/0x60 net/socket.c:2660
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x184d -> 0x184e
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 7804 Comm: syz-executor.1 Not tainted 6.5.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
==================================================================
Fixes: 23f57406b82d ("ipv4: avoid using shared IP generator for connected sockets")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
veth and vxcan need to make sure the ifindexes of the peer
are not negative, core does not validate this.
Using iproute2 with user-space-level checking removed:
Before:
# ./ip link add index 10 type veth peer index -1
# ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
link/ether 52:54:00:74:b2:03 brd ff:ff:ff:ff:ff:ff
10: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 8a:90:ff:57:6d:5d brd ff:ff:ff:ff:ff:ff
-1: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether ae:ed:18:e6:fa:7f brd ff:ff:ff:ff:ff:ff
Now:
$ ./ip link add index 10 type veth peer index -1
Error: ifindex can't be negative.
This problem surfaced in net-next because an explicit WARN()
was added, the root cause is older.
Fixes: e6f8f1a739b6 ("veth: Allow to create peer link with given ifindex")
Fixes: a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)")
Reported-by: syzbot+5ba06978f34abb058571@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
