| Age | Commit message (Collapse) | Author |
|---|
|
Some thread flags can be set remotely, and so even when IRQs are disabled,
the flags can change under our feet. Generally this is unlikely to cause a
problem in practice, but it is somewhat unsound, and KCSAN will
legitimately warn that there is a data race.
To avoid such issues, a snapshot of the flags has to be taken prior to
using them. Some places already use READ_ONCE() for that, others do not.
Convert them all to the new flag accessor helpers.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20211129130653.2037928-3-mark.rutland@arm.com
|
|
Recently to prevent issues with SECCOMP_RET_KILL and similar signals
being changed before they are delivered SA_IMMUTABLE was added.
Unfortunately this broke debuggers[1][2] which reasonably expect
to be able to trap synchronous SIGTRAP and SIGSEGV even when
the target process is not configured to handle those signals.
Add force_exit_sig and use it instead of force_fatal_sig where
historically the code has directly called do_exit. This has the
implementation benefits of going through the signal exit path
(including generating core dumps) without the danger of allowing
userspace to ignore or change these signals.
This avoids userspace regressions as older kernels exited with do_exit
which debuggers also can not intercept.
In the future is should be possible to improve the quality of
implementation of the kernel by changing some of these force_exit_sig
calls to force_fatal_sig. That can be done where it matters on
a case-by-case basis with careful analysis.
Reported-by: Kyle Huey <me@kylehuey.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
[1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com
[2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020
Fixes: 00b06da29cf9 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed")
Fixes: a3616a3c0272 ("signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die")
Fixes: 83a1f27ad773 ("signal/powerpc: On swapcontext failure force SIGSEGV")
Fixes: 9bc508cf0791 ("signal/s390: Use force_sigsegv in default_trap_handler")
Fixes: 086ec444f866 ("signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig")
Fixes: c317d306d550 ("signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails")
Fixes: 695dd0d634df ("signal/x86: In emulate_vsyscall force a signal instead of calling do_exit")
Fixes: 1fbd60df8a85 ("signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.")
Fixes: 941edc5bf174 ("exit/syscall_user_dispatch: Send ordinary signals on failure")
Link: https://lkml.kernel.org/r/871r3dqfv8.fsf_-_@email.froward.int.ebiederm.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull exit cleanups from Eric Biederman:
"While looking at some issues related to the exit path in the kernel I
found several instances where the code is not using the existing
abstractions properly.
This set of changes introduces force_fatal_sig a way of sending a
signal and not allowing it to be caught, and corrects the misuse of
the existing abstractions that I found.
A lot of the misuse of the existing abstractions are silly things such
as doing something after calling a no return function, rolling BUG by
hand, doing more work than necessary to terminate a kernel thread, or
calling do_exit(SIGKILL) instead of calling force_sig(SIGKILL).
In the review a deficiency in force_fatal_sig and force_sig_seccomp
where ptrace or sigaction could prevent the delivery of the signal was
found. I have added a change that adds SA_IMMUTABLE to change that
makes it impossible to interrupt the delivery of those signals, and
allows backporting to fix force_sig_seccomp
And Arnd found an issue where a function passed to kthread_run had the
wrong prototype, and after my cleanup was failing to build."
* 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits)
soc: ti: fix wkup_m3_rproc_boot_thread return type
signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed
signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV)
exit/r8188eu: Replace the macro thread_exit with a simple return 0
exit/rtl8712: Replace the macro thread_exit with a simple return 0
exit/rtl8723bs: Replace the macro thread_exit with a simple return 0
signal/x86: In emulate_vsyscall force a signal instead of calling do_exit
signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig
signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails
exit/syscall_user_dispatch: Send ordinary signals on failure
signal: Implement force_fatal_sig
exit/kthread: Have kernel threads return instead of calling do_exit
signal/s390: Use force_sigsegv in default_trap_handler
signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.
signal/vm86_32: Replace open coded BUG_ON with an actual BUG_ON
signal/sparc: In setup_tsb_params convert open coded BUG into BUG
signal/powerpc: On swapcontext failure force SIGSEGV
signal/sh: Use force_sig(SIGKILL) instead of do_group_exit(SIGKILL)
signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT
signal/sparc32: Remove unreachable do_exit in do_sparc_fault
...
|
|
Use force_fatal_sig instead of calling do_exit directly. This ensures
the ordinary signal handling path gets invoked, core dumps as
appropriate get created, and for multi-threaded processes all of the
threads are terminated not just a single thread.
When asked Gabriel Krisman Bertazi <krisman@collabora.com> said [1]:
> ebiederm@xmission.com (Eric W. Biederman) asked:
>
> > Why does do_syscal_user_dispatch call do_exit(SIGSEGV) and
> > do_exit(SIGSYS) instead of force_sig(SIGSEGV) and force_sig(SIGSYS)?
> >
> > Looking at the code these cases are not expected to happen, so I would
> > be surprised if userspace depends on any particular behaviour on the
> > failure path so I think we can change this.
>
> Hi Eric,
>
> There is not really a good reason, and the use case that originated the
> feature doesn't rely on it.
>
> Unless I'm missing yet another problem and others correct me, I think
> it makes sense to change it as you described.
>
> > Is using do_exit in this way something you copied from seccomp?
>
> I'm not sure, its been a while, but I think it might be just that. The
> first prototype of SUD was implemented as a seccomp mode.
If at some point it becomes interesting we could relax
"force_fatal_sig(SIGSEGV)" to instead say
"force_sig_fault(SIGSEGV, SEGV_MAPERR, sd->selector)".
I avoid doing that in this patch to avoid making it possible
to catch currently uncatchable signals.
Cc: Gabriel Krisman Bertazi <krisman@collabora.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
[1] https://lkml.kernel.org/r/87mtr6gdvi.fsf@collabora.com
Link: https://lkml.kernel.org/r/20211020174406.17889-14-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Invoke rseq_handle_notify_resume() from tracehook_notify_resume() now
that the two function are always called back-to-back by architectures
that have rseq. The rseq helper is stubbed out for architectures that
don't support rseq, i.e. this is a nop across the board.
Note, tracehook_notify_resume() is horribly named and arguably does not
belong in tracehook.h as literally every line of code in it has nothing
to do with tracing. But, that's been true since commit a42c6ded827d
("move key_repace_session_keyring() into tracehook_notify_resume()")
first usurped tracehook_notify_resume() back in 2012. Punt cleaning that
mess up to future patches.
No functional change intended.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210901203030.1292304-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Invoke rseq's NOTIFY_RESUME handler when processing the flag prior to
transferring to a KVM guest, which is roughly equivalent to an exit to
userspace and processes many of the same pending actions. While the task
cannot be in an rseq critical section as the KVM path is reachable only
by via ioctl(KVM_RUN), the side effects that apply to rseq outside of a
critical section still apply, e.g. the current CPU needs to be updated if
the task is migrated.
Clearing TIF_NOTIFY_RESUME without informing rseq can lead to segfaults
and other badness in userspace VMMs that use rseq in combination with KVM,
e.g. due to the CPU ID being stale after task migration.
Fixes: 72c3c0fe54a3 ("x86/kvm: Use generic xfer to guest work function")
Reported-by: Peter Foley <pefoley@google.com>
Bisected-by: Doug Evans <dje@google.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210901203030.1292304-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Checking for and processing RCU-nocb deferred wakeup upon user/guest
entry is only relevant when nohz_full runs on the local CPU, otherwise
the periodic tick should take care of it.
Make sure we don't needlessly pollute these fast-paths as a -3%
performance regression on a will-it-scale.per_process_ops has been
reported so far.
Fixes: 47b8ff194c1f (entry: Explicitly flush pending rcuog wakeup before last rescheduling point)
Fixes: 4ae7dc97f726 (entry/kvm: Explicitly flush pending rcuog wakeup before last rescheduling point)
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210527113441.465489-1-frederic@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core entry updates from Thomas Gleixner:
"A trivial cleanup of typo fixes"
* tag 'core-entry-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Fix typos in comments
|
|
Commit 40607ee97e4e ("preempt/dynamic: Provide irqentry_exit_cond_resched()
static call") tried to provide irqentry_exit_cond_resched() static call
in irqentry_exit, but has a typo in macro conditional statement.
Fixes: 40607ee97e4e ("preempt/dynamic: Provide irqentry_exit_cond_resched() static call")
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210410073523.5493-1-zhouzhouyi@gmail.com
|
|
Fix 3 single-word typos in the generic syscall entry code.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Following the idle loop model, cleanly check for pending rcuog wakeup
before the last rescheduling point on resuming to user mode. This
way we can avoid to do it from rcu_user_enter() with the last resort
self-IPI hack that enforces rescheduling.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210131230548.32970-5-frederic@kernel.org
|
|
Provide static call to control IRQ preemption (called in CONFIG_PREEMPT)
so that we can override its behaviour when preempt= is overriden.
Since the default behaviour is full preemption, its call is
initialized to provide IRQ preemption when preempt= isn't passed.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210118141223.123667-8-frederic@kernel.org
|
|
Michael Kerrisk suggested that, from an API perspective, it is a bad
idea to share the PR_SYS_DISPATCH_ defines between the prctl operation
and the selector variable.
Therefore, define two new constants to be used by SUD's selector variable
and update the corresponding documentation and test cases.
While this changes the API syscall user dispatch has never been part of a
Linux release, it will show up for the first time in 5.11.
Suggested-by: Michael Kerrisk (man-pages) <mtk.manpages@gmail.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210205184321.2062251-1-krisman@collabora.com
|
|
Commit 299155244770 ("entry: Drop usage of TIF flags in the generic syscall
code") introduced a bug on architectures using the generic syscall entry
code, in which processes stopped by PTRACE_SYSCALL do not trap on syscall
return after receiving a TIF_SINGLESTEP.
The reason is that the meaning of TIF_SINGLESTEP flag is overloaded to
cause the trap after a system call is executed, but since the above commit,
the syscall call handler only checks for the SYSCALL_WORK flags on the exit
work.
Split the meaning of TIF_SINGLESTEP such that it only means single-step
mode, and create a new type of SYSCALL_WORK to request a trap immediately
after a syscall in single-step mode. In the current implementation, the
SYSCALL_WORK flag shadows the TIF_SINGLESTEP flag for simplicity.
Update x86 to flip this bit when a tracer enables single stepping.
Fixes: 299155244770 ("entry: Drop usage of TIF flags in the generic syscall code")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kyle Huey <me@kylehuey.com>
Link: https://lore.kernel.org/r/87h7mtc9pr.fsf_-_@collabora.com
|
|
The move of TIF_SYSCALL_EMU to SYSCALL_WORK_SYSCALL_EMU broke single step
reporting. The original code reported the single step when TIF_SINGLESTEP
was set and TIF_SYSCALL_EMU was not set. The SYSCALL_WORK conversion got
the logic wrong and now the reporting only happens when both bits are set.
Restore the original behaviour.
[ tglx: Massaged changelog and dropped the pointless double negation ]
Fixes: 64eb35f701f0 ("ptrace: Migrate TIF_SYSCALL_EMU to use SYSCALL_WORK flag")
Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Link: https://lore.kernel.org/r/877do3gaq9.fsf@m5Zedd9JOGzJrf0
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull kmap updates from Thomas Gleixner:
"The new preemtible kmap_local() implementation:
- Consolidate all kmap_atomic() internals into a generic
implementation which builds the base for the kmap_local() API and
make the kmap_atomic() interface wrappers which handle the
disabling/enabling of preemption and pagefaults.
- Switch the storage from per-CPU to per task and provide scheduler
support for clearing mapping when scheduling out and restoring them
when scheduling back in.
- Merge the migrate_disable/enable() code, which is also part of the
scheduler pull request. This was required to make the kmap_local()
interface available which does not disable preemption when a
mapping is established. It has to disable migration instead to
guarantee that the virtual address of the mapped slot is the same
across preemption.
- Provide better debug facilities: guard pages and enforced
utilization of the mapping mechanics on 64bit systems when the
architecture allows it.
- Provide the new kmap_local() API which can now be used to cleanup
the kmap_atomic() usage sites all over the place. Most of the usage
sites do not require the implicit disabling of preemption and
pagefaults so the penalty on 64bit and 32bit non-highmem systems is
removed and quite some of the code can be simplified. A wholesale
conversion is not possible because some usage depends on the
implicit side effects and some need to be cleaned up because they
work around these side effects.
The migrate disable side effect is only effective on highmem
systems and when enforced debugging is enabled. On 64bit and 32bit
non-highmem systems the overhead is completely avoided"
* tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
ARM: highmem: Fix cache_is_vivt() reference
x86/crashdump/32: Simplify copy_oldmem_page()
io-mapping: Provide iomap_local variant
mm/highmem: Provide kmap_local*
sched: highmem: Store local kmaps in task struct
x86: Support kmap_local() forced debugging
mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP
mm/highmem: Provide and use CONFIG_DEBUG_KMAP_LOCAL
microblaze/mm/highmem: Add dropped #ifdef back
xtensa/mm/highmem: Make generic kmap_atomic() work correctly
mm/highmem: Take kmap_high_get() properly into account
highmem: High implementation details and document API
Documentation/io-mapping: Remove outdated blurb
io-mapping: Cleanup atomic iomap
mm/highmem: Remove the old kmap_atomic cruft
highmem: Get rid of kmap_types.h
xtensa/mm/highmem: Switch to generic kmap atomic
sparc/mm/highmem: Switch to generic kmap atomic
powerpc/mm/highmem: Switch to generic kmap atomic
nds32/mm/highmem: Switch to generic kmap atomic
...
|
|
This is the same as syscall_exit_to_user_mode() but without calling
exit_to_user_mode(). This can be used if there is an architectural reason
to avoid the combo function, e.g. restarting a syscall without returning to
userspace. Before returning to user space the caller has to invoke
exit_to_user_mode().
[ tglx: Amended comments ]
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201201142755.31931-6-svens@linux.ibm.com
|
|
Called from architecture specific code when syscall_exit_to_user_mode() is
not suitable. It simply calls __exit_to_user_mode().
This way __exit_to_user_mode() can still be inlined because it is declared
static __always_inline.
[ tglx: Amended comments and moved it to a different place in the header ]
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201201142755.31931-5-svens@linux.ibm.com
|
|
To be called from architecture specific code if the combo interfaces are
not suitable. It simply calls __enter_from_user_mode(). This way
__enter_from_user_mode will still be inlined because it is declared static
__always_inline.
[ tglx: Amend comments and move it to a different location in the header ]
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201201142755.31931-4-svens@linux.ibm.com
|
|
In order to make this function publicly available rename it so it can still
be inlined. An additional exit_to_user_mode() function will be added with
a later commit.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201201142755.31931-3-svens@linux.ibm.com
|
|
In order to make this function publicly available rename it so it can still
be inlined. An additional enter_from_user_mode() function will be added with
a later commit.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201201142755.31931-2-svens@linux.ibm.com
|
|
Syscall User Dispatch (SUD) must take precedence over seccomp and
ptrace, since the use case is emulation (it can be invoked with a
different ABI) such that seccomp filtering by syscall number doesn't
make sense in the first place. In addition, either the syscall is
dispatched back to userspace, in which case there is no resource for to
trace, or the syscall will be executed, and seccomp/ptrace will execute
next.
Since SUD runs before tracepoints, it needs to be a SYSCALL_WORK_EXIT as
well, just to prevent a trace exit event when dispatch was triggered.
For that, the on_syscall_dispatch() examines context to skip the
tracepoint, audit and other work.
[ tglx: Add a comment on the exit side ]
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201127193238.821364-5-krisman@collabora.com
|
|
Introduce a mechanism to quickly disable/enable syscall handling for a
specific process and redirect to userspace via SIGSYS. This is useful
for processes with parts that require syscall redirection and parts that
don't, but who need to perform this boundary crossing really fast,
without paying the cost of a system call to reconfigure syscall handling
on each boundary transition. This is particularly important for Windows
games running over Wine.
The proposed interface looks like this:
prctl(PR_SET_SYSCALL_USER_DISPATCH, <op>, <off>, <length>, [selector])
The range [<offset>,<offset>+<length>) is a part of the process memory
map that is allowed to by-pass the redirection code and dispatch
syscalls directly, such that in fast paths a process doesn't need to
disable the trap nor the kernel has to check the selector. This is
essential to return from SIGSYS to a blocked area without triggering
another SIGSYS from rt_sigreturn.
selector is an optional pointer to a char-sized userspace memory region
that has a key switch for the mechanism. This key switch is set to
either PR_SYS_DISPATCH_ON, PR_SYS_DISPATCH_OFF to enable and disable the
redirection without calling the kernel.
The feature is meant to be set per-thread and it is disabled on
fork/clone/execv.
Internally, this doesn't add overhead to the syscall hot path, and it
requires very little per-architecture support. I avoided using seccomp,
even though it duplicates some functionality, due to previous feedback
that maybe it shouldn't mix with seccomp since it is not a security
mechanism. And obviously, this should never be considered a security
mechanism, since any part of the program can by-pass it by using the
syscall dispatcher.
For the sysinfo benchmark, which measures the overhead added to
executing a native syscall that doesn't require interception, the
overhead using only the direct dispatcher region to issue syscalls is
pretty much irrelevant. The overhead of using the selector goes around
40ns for a native (unredirected) syscall in my system, and it is (as
expected) dominated by the supervisor-mode user-address access. In
fact, with SMAP off, the overhead is consistently less than 5ns on my
test box.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201127193238.821364-4-krisman@collabora.com
|
|
Instead of storing the map per CPU provide and use per task storage. That
prepares for local kmaps which are preemptible.
The context switch code is preparatory and not yet in use because
kmap_atomic() runs with preemption disabled. Will be made usable in the
next step.
The context switch logic is safe even when an interrupt happens after
clearing or before restoring the kmaps. The kmap index in task struct is
not modified so any nesting kmap in an interrupt will use unused indices
and on return the counter is the same as before.
Also add an assert into the return to user space code. Going back to user
space with an active kmap local is a nono.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20201118204007.372935758@linutronix.de
|
|
Now that the flags migration in the common syscall entry code is complete
and the code relies exclusively on thread_info::syscall_work, clean up the
accesses to TI flags in that path.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20201116174206.2639648-10-krisman@collabora.com
|
|
On architectures using the generic syscall entry code the architecture
independent syscall work is moved to flags in thread_info::syscall_work.
This removes architecture dependencies and frees up TIF bits.
Define SYSCALL_WORK_SYSCALL_EMU, use it in the generic entry code and
convert the code which uses the TIF specific helper functions to use the
new *_syscall_work() helpers which either resolve to the new mode for users
of the generic entry code or to the TIF based functions for the other
architectures.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20201116174206.2639648-8-krisman@collabora.com
|
|
On architectures using the generic syscall entry code the architecture
independent syscall work is moved to flags in thread_info::syscall_work.
This removes architecture dependencies and frees up TIF bits.
Define SYSCALL_WORK_SYSCALL_TRACE, use it in the generic entry code and
convert the code which uses the TIF specific helper functions to use the
new *_syscall_work() helpers which either resolve to the new mode for users
of the generic entry code or to the TIF based functions for the other
architectures.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20201116174206.2639648-7-krisman@collabora.com
|
|
On architectures using the generic syscall entry code the architecture
independent syscall work is moved to flags in thread_info::syscall_work.
This removes architecture dependencies and frees up TIF bits.
Define SYSCALL_WORK_SYSCALL_TRACEPOINT, use it in the generic entry code
and convert the code which uses the TIF specific helper functions to use
the new *_syscall_work() helpers which either resolve to the new mode for
users of the generic entry code or to the TIF based functions for the other
architectures.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20201116174206.2639648-6-krisman@collabora.com
|
|
On architectures using the generic syscall entry code the architecture
independent syscall work is moved to flags in thread_info::syscall_work.
This removes architecture dependencies and frees up TIF bits.
Define SYSCALL_WORK_SECCOMP, use it in the generic entry code and convert
the code which uses the TIF specific helper functions to use the new
*_syscall_work() helpers which either resolve to the new mode for users of
the generic entry code or to the TIF based functions for the other
architectures.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20201116174206.2639648-5-krisman@collabora.com
|
|
Prepare the common entry code to use the SYSCALL_WORK flags. They will
be defined in subsequent patches for each type of syscall
work. SYSCALL_WORK_ENTRY/EXIT are defined for the transition, as they
will replace the TIF_ equivalent defines.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20201116174206.2639648-4-krisman@collabora.com
|
|
s/reguired/required/
s/Interupts/Interrupts/
s/quiescient/quiescent/
s/assemenbly/assembly/
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201104230157.3378023-1-ira.weiny@intel.com
|
|
Lockdep state handling on NMI enter and exit is nothing specific to X86. It's
not any different on other architectures. Also the extra state type is not
necessary, irqentry_state_t can carry the necessary information as well.
Move it to common code and extend irqentry_state_t to carry lockdep state.
[ Ira: Make exit_rcu and lockdep a union as they are mutually exclusive
between the IRQ and NMI exceptions, and add kernel documentation for
struct irqentry_state_t ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201102205320.1458656-7-ira.weiny@intel.com
|
|
Pick up the entry fix before further modifications.
|
|
When an exception/interrupt hits kernel space and the kernel is not
currently in the idle task then RCU must be watching.
irqentry_enter() validates this via rcu_irq_enter_check_tick(), which in
turn invokes lockdep when taking a lock. But at that point lockdep does not
yet know about the fact that interrupts have been disabled by the CPU,
which triggers a lockdep splat complaining about inconsistent state.
Invoking trace_hardirqs_off() before rcu_irq_enter_check_tick() defeats the
point of rcu_irq_enter_check_tick() because trace_hardirqs_off() uses RCU.
So use the same sequence as for the idle case and tell lockdep about the
irq state change first, invoke the RCU check and then do the lockdep and
tracer update.
Fixes: a5497bab5f72 ("entry: Provide generic interrupt entry/exit code")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87y2jhl19s.fsf@nanos.tec.linutronix.de
|
|
irq_enter_from_user_mode() was changed to irqentry_enter_from_user_mode().
Update the comment within irqentry_enter() to reflect this change.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201028163632.965518-1-ira.weiny@intel.com
|
|
Add TIF_NOTIFY_SIGNAL handling in the generic entry code, which if set,
will return true if signal_pending() is used in a wait loop. That causes an
exit of the loop so that notify_signal tracehooks can be run. If the wait
loop is currently inside a system call, the system call is restarted once
task_work has been processed.
In preparation for only having arch_do_signal() handle syscall restarts if
_TIF_SIGPENDING isn't set, rename it to arch_do_signal_or_restart(). Pass
in a boolean that tells the architecture specific signal handler if it
should attempt to get a signal, or just process a potential syscall
restart.
For !CONFIG_GENERIC_ENTRY archs, add the TIF_NOTIFY_SIGNAL handling to
get_signal(). This is done to minimize the needed architecture changes to
support this feature.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20201026203230.386348-3-axboe@kernel.dk
|
|
Pull arch task_work cleanups from Jens Axboe:
"Two cleanups that don't fit other categories:
- Finally get the task_work_add() cleanup done properly, so we don't
have random 0/1/false/true/TWA_SIGNAL confusing use cases. Updates
all callers, and also fixes up the documentation for
task_work_add().
- While working on some TIF related changes for 5.11, this
TIF_NOTIFY_RESUME cleanup fell out of that. Remove some arch
duplication for how that is handled"
* tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block:
task_work: cleanup notification modes
tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU changes from Ingo Molnar:
- Debugging for smp_call_function()
- RT raw/non-raw lock ordering fixes
- Strict grace periods for KASAN
- New smp_call_function() torture test
- Torture-test updates
- Documentation updates
- Miscellaneous fixes
[ This doesn't actually pull the tag - I've dropped the last merge from
the RCU branch due to questions about the series. - Linus ]
* tag 'core-rcu-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
smp: Make symbol 'csd_bug_count' static
kernel/smp: Provide CSD lock timeout diagnostics
smp: Add source and destination CPUs to __call_single_data
rcu: Shrink each possible cpu krcp
rcu/segcblist: Prevent useless GP start if no CBs to accelerate
torture: Add gdb support
rcutorture: Allow pointer leaks to test diagnostic code
rcutorture: Hoist OOM registry up one level
refperf: Avoid null pointer dereference when buf fails to allocate
rcutorture: Properly synchronize with OOM notifier
rcutorture: Properly set rcu_fwds for OOM handling
torture: Add kvm.sh --help and update help message
rcutorture: Add CONFIG_PROVE_RCU_LIST to TREE05
torture: Update initrd documentation
rcutorture: Replace HTTP links with HTTPS ones
locktorture: Make function torture_percpu_rwsem_init() static
torture: document --allcpus argument added to the kvm.sh script
rcutorture: Output number of elapsed grace periods
rcutorture: Remove KCSAN stubs
rcu: Remove unused "cpu" parameter from rcu_report_qs_rdp()
...
|
|
All the callers currently do this, clean it up and move the clearing
into tracehook_notify_resume() instead.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
"Misc minor cleanups"
* tag 'x86_cleanups_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Fix typo in comments for syscall_enter_from_user_mode()
x86/resctrl: Fix spelling in user-visible warning messages
x86/entry/64: Do not include inst.h in calling.h
x86/mpparse: Remove duplicate io_apic.h include
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull v5.10 RCU changes from Paul E. McKenney:
- Debugging for smp_call_function().
- Strict grace periods for KASAN. The point of this series is to find
RCU-usage bugs, so the corresponding new RCU_STRICT_GRACE_PERIOD
Kconfig option depends on both DEBUG_KERNEL and RCU_EXPERT, and is
further disabled by dfefault. Finally, the help text includes
a goodly list of scary caveats.
- New smp_call_function() torture test.
- Torture-test updates.
- Documentation updates.
- Miscellaneous fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Just to help myself and others with finding the correct function names,
fix a typo for "usermode" vs "user_mode".
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200919080936.259819-1-keescook@chromium.org
|
|
On v5.8 when doing seccomp syscall rewrites (e.g. getpid into getppid
as seen in the seccomp selftests), trace (and audit) correctly see the
rewritten syscall on entry and exit:
seccomp_bpf-1307 [000] .... 22974.874393: sys_enter: NR 110 (...
seccomp_bpf-1307 [000] .N.. 22974.874401: sys_exit: NR 110 = 1304
With mainline we see a mismatched enter and exit (the original syscall
is incorrectly visible on entry):
seccomp_bpf-1030 [000] .... 21.806766: sys_enter: NR 39 (...
seccomp_bpf-1030 [000] .... 21.806767: sys_exit: NR 110 = 1027
When ptrace or seccomp change the syscall, this needs to be visible to
trace and audit at that time as well. Update the syscall earlier so they
see the correct value.
Fixes: d88d59b64ca3 ("core/entry: Respect syscall number rewrites")
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200912005826.586171-1-keescook@chromium.org
|
|
Andy reported that the syscall treacing for 32bit fast syscall fails:
# ./tools/testing/selftests/x86/ptrace_syscall_32
...
[RUN] SYSEMU
[FAIL] Initial args are wrong (nr=224, args=10 11 12 13 14 4289172732)
...
[RUN] SYSCALL
[FAIL] Initial args are wrong (nr=29, args=0 0 0 0 0 4289172732)
The eason is that the conversion to generic entry code moved the retrieval
of the sixth argument (EBP) after the point where the syscall entry work
runs, i.e. ptrace, seccomp, audit...
Unbreak it by providing a split up version of syscall_enter_from_user_mode().
- syscall_enter_from_user_mode_prepare() establishes state and enables
interrupts
- syscall_enter_from_user_mode_work() runs the entry work
Replace the call to syscall_enter_from_user_mode() in the 32bit fast
syscall C-entry with the split functions and stick the EBP retrieval
between them.
Fixes: 27d6b4d14f5c ("x86/entry: Use generic syscall entry function")
Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/87k0xdjbtt.fsf@nanos.tec.linutronix.de
|
|
The x86/entry work removed all uses of __rcu_is_watching(), therefore
this commit removes it entirely.
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <x86@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The transcript of the x86 entry code to the generic version failed to
reload the syscall number from ptregs after ptrace and seccomp have run,
which both can modify the syscall number in ptregs. It returns the original
syscall number instead which is obviously not the right thing to do.
Reload the syscall number to fix that.
Fixes: 142781e108b1 ("entry: Provide generic syscall entry functionality")
Reported-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kyle Huey <me@kylehuey.com>
Tested-by: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/87blj6ifo8.fsf@nanos.tec.linutronix.de
|
|
The noinstr attribute is to be specified before the return type in the
same way 'inline' is used.
Similar cases were recently fixed for x86 in commit 7f6fa101dfac ("x86:
Correct noinstr qualifiers"), but the generic entry code was based on the
the original version and did not carry the fix over.
Fixes: a5497bab5f72 ("entry: Provide generic interrupt entry/exit code")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200725091951.744848-3-mingo@kernel.org
|
|
Entering a guest is similar to exiting to user space. Pending work like
handling signals, rescheduling, task work etc. needs to be handled before
that.
Provide generic infrastructure to avoid duplication of the same handling
code all over the place.
The transfer to guest mode handling is different from the exit to usermode
handling, e.g. vs. rseq and live patching, so a separate function is used.
The initial list of work items handled is:
TIF_SIGPENDING, TIF_NEED_RESCHED, TIF_NOTIFY_RESUME
Architecture specific TIF flags can be added via defines in the
architecture specific include files.
The calling convention is also different from the syscall/interrupt entry
functions as KVM invokes this from the outer vcpu_run() loop with
interrupts and preemption enabled. To prevent missing a pending work item
it invokes a check for pending TIF work from interrupt disabled code right
before transitioning to guest mode. The lockdep, RCU and tracing state
handling is also done directly around the switch to and from guest mode.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200722220519.833296398@linutronix.de
|
|
Like the syscall entry/exit code interrupt/exception entry after the real
low level ASM bits should not be different accross architectures.
Provide a generic version based on the x86 code.
irqentry_enter() is called after the low level entry code and
irqentry_exit() must be invoked right before returning to the low level
code which just contains the actual return logic. The code before
irqentry_enter() and irqentry_exit() must not be instrumented. Code after
irqentry_enter() and before irqentry_exit() can be instrumented.
irqentry_enter() invokes irqentry_enter_from_user_mode() if the
interrupt/exception came from user mode. If if entered from kernel mode it
handles the kernel mode variant of establishing state for lockdep, RCU and
tracing depending on the kernel context it interrupted (idle, non-idle).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200722220519.723703209@linutronix.de
|
|
Like syscall entry all architectures have similar and pointlessly different
code to handle pending work before returning from a syscall to user space.
1) One-time syscall exit work:
- rseq syscall exit
- audit
- syscall tracing
- tracehook (single stepping)
2) Preparatory work
- Exit to user mode loop (common TIF handling).
- Architecture specific one time work arch_exit_to_user_mode_prepare()
- Address limit and lockdep checks
3) Final transition (lockdep, tracing, context tracking, RCU). Invokes
arch_exit_to_user_mode() to handle e.g. speculation mitigations
Provide a generic version based on the x86 code which has all the RCU and
instrumentation protections right.
Provide a variant for interrupt return to user mode as well which shares
the above #2 and #3 work items.
After syscall_exit_to_user_mode() and irqentry_exit_to_user_mode() the
architecture code just has to return to user space. The code after
returning from these functions must not be instrumented.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200722220519.613977173@linutronix.de
|
