| Age | Commit message (Collapse) | Author |
|---|
|
Pull kvm updates from Paolo Bonzini:
"The biggest change here is eliminating the awful idea that KVM had of
essentially guessing which pfns are refcounted pages.
The reason to do so was that KVM needs to map both non-refcounted
pages (for example BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP
VMAs that contain refcounted pages.
However, the result was security issues in the past, and more recently
the inability to map VM_IO and VM_PFNMAP memory that _is_ backed by
struct page but is not refcounted. In particular this broke virtio-gpu
blob resources (which directly map host graphics buffers into the
guest as "vram" for the virtio-gpu device) with the amdgpu driver,
because amdgpu allocates non-compound higher order pages and the tail
pages could not be mapped into KVM.
This requires adjusting all uses of struct page in the
per-architecture code, to always work on the pfn whenever possible.
The large series that did this, from David Stevens and Sean
Christopherson, also cleaned up substantially the set of functions
that provided arch code with the pfn for a host virtual addresses.
The previous maze of twisty little passages, all different, is
replaced by five functions (__gfn_to_page, __kvm_faultin_pfn, the
non-__ versions of these two, and kvm_prefetch_pages) saving almost
200 lines of code.
ARM:
- Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
- Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This
call was introduced in PSCIv1.3 as a mechanism to request
hibernation, similar to the S4 state in ACPI
- Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
- PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
- Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
- Avoid emulated MMIO completion if userspace has requested
synchronous external abort injection
- Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
LoongArch:
- Add iocsr and mmio bus simulation in kernel.
- Add in-kernel interrupt controller emulation.
- Add support for virtualization extensions to the eiointc irqchip.
PPC:
- Drop lingering and utterly obsolete references to PPC970 KVM, which
was removed 10 years ago.
- Fix incorrect documentation references to non-existing ioctls
RISC-V:
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
s390:
- New selftests: more ucontrol selftests and CPU model sanity checks
- Support for the gen17 CPU model
- List registers supported by KVM_GET/SET_ONE_REG in the
documentation
x86:
- Cleanup KVM's handling of Accessed and Dirty bits to dedup code,
improve documentation, harden against unexpected changes.
Even if the hardware A/D tracking is disabled, it is possible to
use the hardware-defined A/D bits to track if a PFN is Accessed
and/or Dirty, and that removes a lot of special cases.
- Elide TLB flushes when aging secondary PTEs, as has been done in
x86's primary MMU for over 10 years.
- Recover huge pages in-place in the TDP MMU when dirty page logging
is toggled off, instead of zapping them and waiting until the page
is re-accessed to create a huge mapping. This reduces vCPU jitter.
- Batch TLB flushes when dirty page logging is toggled off. This
reduces the time it takes to disable dirty logging by ~3x.
- Remove the shrinker that was (poorly) attempting to reclaim shadow
page tables in low-memory situations.
- Clean up and optimize KVM's handling of writes to
MSR_IA32_APICBASE.
- Advertise CPUIDs for new instructions in Clearwater Forest
- Quirk KVM's misguided behavior of initialized certain feature MSRs
to their maximum supported feature set, which can result in KVM
creating invalid vCPU state. E.g. initializing PERF_CAPABILITIES to
a non-zero value results in the vCPU having invalid state if
userspace hides PDCM from the guest, which in turn can lead to
save/restore failures.
- Fix KVM's handling of non-canonical checks for vCPUs that support
LA57 to better follow the "architecture", in quotes because the
actual behavior is poorly documented. E.g. most MSR writes and
descriptor table loads ignore CR4.LA57 and operate purely on
whether the CPU supports LA57.
- Bypass the register cache when querying CPL from kvm_sched_out(),
as filling the cache from IRQ context is generally unsafe; harden
the cache accessors to try to prevent similar issues from occuring
in the future. The issue that triggered this change was already
fixed in 6.12, but was still kinda latent.
- Advertise AMD_IBPB_RET to userspace, and fix a related bug where
KVM over-advertises SPEC_CTRL when trying to support cross-vendor
VMs.
- Minor cleanups
- Switch hugepage recovery thread to use vhost_task.
These kthreads can consume significant amounts of CPU time on
behalf of a VM or in response to how the VM behaves (for example
how it accesses its memory); therefore KVM tried to place the
thread in the VM's cgroups and charge the CPU time consumed by that
work to the VM's container.
However the kthreads did not process SIGSTOP/SIGCONT, and therefore
cgroups which had KVM instances inside could not complete freezing.
Fix this by replacing the kthread with a PF_USER_WORKER thread, via
the vhost_task abstraction. Another 100+ lines removed, with
generally better behavior too like having these threads properly
parented in the process tree.
- Revert a workaround for an old CPU erratum (Nehalem/Westmere) that
didn't really work; there was really nothing to work around anyway:
the broken patch was meant to fix nested virtualization, but the
PERF_GLOBAL_CTRL MSR is virtualized and therefore unaffected by the
erratum.
- Fix 6.12 regression where CONFIG_KVM will be built as a module even
if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is
'y'.
x86 selftests:
- x86 selftests can now use AVX.
Documentation:
- Use rST internal links
- Reorganize the introduction to the API document
Generic:
- Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock
instead of RCU, so that running a vCPU on a different task doesn't
encounter long due to having to wait for all CPUs become quiescent.
In general both reads and writes are rare, but userspace that
supports confidential computing is introducing the use of "helper"
vCPUs that may jump from one host processor to another. Those will
be very happy to trigger a synchronize_rcu(), and the effect on
performance is quite the disaster"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (298 commits)
KVM: x86: Break CONFIG_KVM_X86's direct dependency on KVM_INTEL || KVM_AMD
KVM: x86: add back X86_LOCAL_APIC dependency
Revert "KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config()"
KVM: x86: switch hugepage recovery thread to vhost_task
KVM: x86: expose MSR_PLATFORM_INFO as a feature MSR
x86: KVM: Advertise CPUIDs for new instructions in Clearwater Forest
Documentation: KVM: fix malformed table
irqchip/loongson-eiointc: Add virt extension support
LoongArch: KVM: Add irqfd support
LoongArch: KVM: Add PCHPIC user mode read and write functions
LoongArch: KVM: Add PCHPIC read and write functions
LoongArch: KVM: Add PCHPIC device support
LoongArch: KVM: Add EIOINTC user mode read and write functions
LoongArch: KVM: Add EIOINTC read and write functions
LoongArch: KVM: Add EIOINTC device support
LoongArch: KVM: Add IPI user mode read and write function
LoongArch: KVM: Add IPI read and write function
LoongArch: KVM: Add IPI device support
LoongArch: KVM: Add iocsr and mmio bus simulation in kernel
KVM: arm64: Pass on SVE mapping failures
...
|
|
On some devices there are HW dependencies for shared frequency and voltage
between devices. It will impact Energy Aware Scheduler (EAS) decision,
where CPUs share the voltage & frequency domain with other CPUs or devices
e.g.
- Mid CPUs + Big CPU
- Little CPU + L3 cache in DSU
- some other device + Little CPUs
Detailed explanation of one example:
When the L3 cache frequency is increased, the affected Little CPUs might
run at higher voltage and frequency. That higher voltage causes higher CPU
power and thus more energy is used for running the tasks. This is
important for background running tasks, which try to run on energy
efficient CPUs.
Therefore, add performance state limits which are applied for the device
(in this case CPU). This is important on SoCs with HW dependencies
mentioned above so that the Energy Aware Scheduler (EAS) does not use
performance states outside the valid min-max range for energy calculation.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20241030164126.1263793-2-lukasz.luba@arm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The PSCI v1.3 specification adds support for a SYSTEM_OFF2 function
which is analogous to ACPI S4 state. This will allow hosting
environments to determine that a guest is hibernated rather than just
powered off, and handle that state appropriately on subsequent launches.
Since commit 60c0d45a7f7a ("efi/arm64: use UEFI for system reset and
poweroff") the EFI shutdown method is deliberately preferred over PSCI
or other methods. So register a SYS_OFF_MODE_POWER_OFF handler which
*only* handles the hibernation, leaving the original PSCI SYSTEM_OFF as
a last resort via the legacy pm_power_off function pointer.
The hibernation code already exports a system_entering_hibernation()
function which is be used by the higher-priority handler to check for
hibernation. That existing function just returns the value of a static
boolean variable from hibernate.c, which was previously only set in the
hibernation_platform_enter() code path. Set the same flag in the simpler
code path around the call to kernel_power_off() too.
An alternative way to hook SYSTEM_OFF2 into the hibernation code would
be to register a platform_hibernation_ops structure with an ->enter()
method which makes the new SYSTEM_OFF2 call. But that would have the
unwanted side-effect of making hibernation take a completely different
code path in hibernation_platform_enter(), invoking a lot of special dpm
callbacks.
Another option might be to add a new SYS_OFF_MODE_HIBERNATE mode, with
fallback to SYS_OFF_MODE_POWER_OFF. Or to use the sys_off_data to
indicate whether the power off is for hibernation.
But this version works and is relatively simple.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20241019172459.2241939-7-dwmw2@infradead.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When saveable_highmem_page() is unused, it prevents kernel builds
with clang, `make W=1` and CONFIG_WERROR=y:
kernel/power/snapshot.c:1369:21: error: unused function 'saveable_highmem_page' [-Werror,-Wunused-function]
1369 | static inline void *saveable_highmem_page(struct zone *z, unsigned long p)
| ^~~~~~~~~~~~~~~~~~~~~
Fix this by removing unused stub.
See also commit 6863f5643dd7 ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240905184848.318978-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
As Documentation/filesystems/sysfs.rst suggested, show() should only use
sysfs_emit() or sysfs_emit_at() when formatting the value to be returned
to user space.
No functional change intended.
Signed-off-by: Xueqin Luo <luoxueqin@kylinos.cn>
Link: https://patch.msgid.link/20240801083156.2513508-3-luoxueqin@kylinos.cn
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
As Documentation/filesystems/sysfs.rst suggested, show() should only
use sysfs_emit() or sysfs_emit_at() when formatting the value to be
returned to user space.
No functional change intended.
Signed-off-by: Xueqin Luo <luoxueqin@kylinos.cn>
Link: https://patch.msgid.link/20240801083156.2513508-2-luoxueqin@kylinos.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
To streamline maintenance efforts, we propose removing the implementation
of swap_free(). Instead, we can simply invoke swap_free_nr() with nr set
to 1. swap_free_nr() is designed with a bitmap consisting of only one
long, resulting in overhead that can be ignored for cases where nr equals
1.
A prime candidate for leveraging swap_free_nr() lies within
kernel/power/swap.c. Implementing this change facilitates the adoption of
batch processing for hibernation.
Link: https://lkml.kernel.org/r/20240529082824.150954-3-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Suggested-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Chris Li <chrisl@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chuanhua Han <hanchuanhua@oppo.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix io_uring based write-through after converting cifs to use the
netfs library
- Fix aio error handling when doing write-through via netfs library
- Fix performance regression in iomap when used with non-large folio
mappings
- Fix signalfd error code
- Remove obsolete comment in signalfd code
- Fix async request indication in netfs_perform_write() by raising
BDP_ASYNC when IOCB_NOWAIT is set
- Yield swap device immediately to prevent spurious EBUSY errors
- Don't cross a .backup mountpoint from backup volumes in afs to avoid
infinite loops
- Fix a race between umount and async request completion in 9p after 9p
was converted to use the netfs library
* tag 'vfs-6.10-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs, 9p: Fix race between umount and async request completion
afs: Don't cross .backup mountpoint from backup volume
swap: yield device immediately
netfs: Fix setting of BDP_ASYNC from iocb flags
signalfd: drop an obsolete comment
signalfd: fix error return code
iomap: fault in smaller chunks for non-large folio mappings
filemap: add helper mapping_max_folio_size()
netfs: Fix AIO error handling when doing write-through
netfs: Fix io_uring based write-through
|
|
Otherwise we can cause spurious EBUSY issues when trying to mount the
rootfs later on.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218845
Reported-by: Petri Kaukasoina <petri.kaukasoina@tuni.fi>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs blocksize updates from Al Viro:
"This gets rid of bogus set_blocksize() uses, switches it over
to be based on a 'struct file *' and verifies that the caller
has the device opened exclusively"
* tag 'pull-set_blocksize' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make set_blocksize() fail unless block device is opened exclusive
set_blocksize(): switch to passing struct file *
btrfs_get_bdev_and_sb(): call set_blocksize() only for exclusive opens
swsusp: don't bother with setting block size
zram: don't bother with reopening - just use O_EXCL for open
swapon(2): open swap with O_EXCL
swapon(2)/swapoff(2): don't bother with block size
pktcdvd: sort set_blocksize() calls out
bcache_register(): don't bother with set_blocksize()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- The locking around cpuset hotplug processing has always been a bit of
mess which was worked around by making hotplug processing
asynchronous. The asynchronity isn't great and led to other issues.
We tried to make the behavior synchronous a while ago but that led to
lockdep splats. Waiman took another stab at cleaning up and making it
synchronous. The patch has been in -next for well over a month and
there haven't been any complaints, so fingers crossed.
- Tracepoints added to help understanding rstat lock contentions.
- A bunch of minor changes - doc updates, code cleanups and selftests.
* tag 'cgroup-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (24 commits)
cgroup/rstat: add cgroup_rstat_cpu_lock helpers and tracepoints
selftests/cgroup: Drop define _GNU_SOURCE
docs: cgroup-v1: Update page cache removal functions
selftests/cgroup: fix uninitialized variables in test_zswap.c
selftests/cgroup: cpu_hogger init: use {} instead of {NULL}
selftests/cgroup: fix clang warnings: uninitialized fd variable
selftests/cgroup: fix clang build failures for abs() calls
cgroup/cpuset: Remove outdated comment in sched_partition_write()
cgroup/cpuset: Fix incorrect top_cpuset flags
cgroup/cpuset: Avoid clearing CS_SCHED_LOAD_BALANCE twice
cgroup/cpuset: Statically initialize more members of top_cpuset
cgroup: Avoid unnecessary looping in cgroup_no_v1()
cgroup, legacy_freezer: update comment for freezer_css_offline()
docs, cgroup: add entries for pids to cgroup-v2.rst
cgroup: don't call cgroup1_pidlist_destroy_all() for v2
cgroup_freezer: update comment for freezer_css_online()
cgroup/rstat: desc member cgrp in cgroup_rstat_flush_release
cgroup/rstat: add cgroup_rstat_lock helpers and tracepoints
cgroup/pids: Remove superfluous zeroing
docs: cgroup-v1: Fix description for css_online
...
|
|
Merge Enery Model update and a power management documentation update for
6.10:
- Make the Samsung exynos-asv driver update the Energy Model after
adjusting voltage on top of some preliminary changes of the OPP and
Enery Model generic code (Lukasz Luba).
- Remove a reference to a function that has been dropped from the power
management documentation (Bjorn Helgaas).
* pm-em:
soc: samsung: exynos-asv: Update Energy Model after adjusting voltage
PM: EM: Add em_dev_update_chip_binning()
PM: EM: Refactor em_adjust_new_capacity()
OPP: OF: Export dev_opp_pm_calc_power() for usage from EM
* pm-docs:
Documentation: PM: Update platform_pci_wakeup_init() reference
|
|
same as with the swap...
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
This kernel config option is simply assigned with the resume_file
buffer. It should be NUL-terminated but not necessarily NUL-padded as
per its further usage with other string apis:
| static int __init find_resume_device(void)
| {
| if (!strlen(resume_file))
| return -ENOENT;
|
| pm_pr_dbg("Checking hibernation image partition %s\n", resume_file);
Use strscpy() [2] as it guarantees NUL-termination on the destination
buffer. Specifically, use the new 2-argument version of strscpy()
introduced in Commit e6584c3964f2f ("string: Allow 2-argument
strscpy()").
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since commit 3a5a6d0c2b03("cpuset: don't nest cgroup_mutex inside
get_online_cpus()"), cpuset hotplug was done asynchronously via a work
function. This is to avoid recursive locking of cgroup_mutex.
Since then, the cgroup locking scheme has changed quite a bit. A
cpuset_mutex was introduced to protect cpuset specific operations.
The cpuset_mutex is then replaced by a cpuset_rwsem. With commit
d74b27d63a8b ("cgroup/cpuset: Change cpuset_rwsem and hotplug lock
order"), cpu_hotplug_lock is acquired before cpuset_rwsem. Later on,
cpuset_rwsem is reverted back to cpuset_mutex. All these locking changes
allow the hotplug code to call into cpuset core directly.
The following commits were also merged due to the asynchronous nature
of cpuset hotplug processing.
- commit b22afcdf04c9 ("cpu/hotplug: Cure the cpusets trainwreck")
- commit 50e76632339d ("sched/cpuset/pm: Fix cpuset vs. suspend-resume
bugs")
- commit 28b89b9e6f7b ("cpuset: handle race between CPU hotplug and
cpuset_hotplug_work")
Clean up all these bandages by making cpuset hotplug
processing synchronous again with the exception that the call to
cgroup_transfer_tasks() to transfer tasks out of an empty cgroup v1
cpuset, if necessary, will still be done via a work function due to the
existing cgroup_mutex -> cpu_hotplug_lock dependency. It is possible
to reverse that dependency, but that will require updating a number of
different cgroup controllers. This special hotplug code path should be
rarely taken anyway.
As all the cpuset states will be updated by the end of the hotplug
operation, we can revert most the above commits except commit
50e76632339d ("sched/cpuset/pm: Fix cpuset vs. suspend-resume bugs")
which is partially reverted. Also removing some cpus_read_lock trylock
attempts in the cpuset partition code as they are no longer necessary
since the cpu_hotplug_lock is now held for the whole duration of the
cpuset hotplug code path.
Signed-off-by: Waiman Long <longman@redhat.com>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add a function which allows to modify easily the EM after the new voltage
information is available. The device drivers for the chip can adjust
the voltage values after setup. The voltage for the same frequency in OPP
can be different due to chip binning. The voltage impacts the power usage
and the EM power values can be updated to reflect that.
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Extract em_table_dup() and em_recalc_and_update() from
em_adjust_new_capacity(). Both functions will be later reused by the
'update EM due to chip binning' functionality.
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
s2idle works like a regular suspend with freezing processes and freezing
devices. All CPUs except the control CPU go into idle. Once this is
completed the control CPU kicks all other CPUs out of idle, so that they
reenter the idle loop and then enter s2idle state. The control CPU then
issues an swait() on the suspend state and therefore enters the idle loop
as well.
Due to being kicked out of idle, the other CPUs leave their NOHZ states,
which means the tick is active and the corresponding hrtimer is programmed
to the next jiffie.
On entering s2idle the CPUs shut down their local clockevent device to
prevent wakeups. The last CPU which enters s2idle shuts down its local
clockevent and freezes timekeeping.
On resume, one of the CPUs receives the wakeup interrupt, unfreezes
timekeeping and its local clockevent and starts the resume process. At that
point all other CPUs are still in s2idle with their clockevents switched
off. They only resume when they are kicked by another CPU or after resuming
devices and then receiving a device interrupt.
That means there is no guarantee that all CPUs will wakeup directly on
resume. As a consequence there is no guarantee that timers which are queued
on those CPUs and should expire directly after resume, are handled. Also
timer list timers which are remotely queued to one of those CPUs after
resume will not result in a reprogramming IPI as the tick is
active. Queueing a hrtimer will also not result in a reprogramming IPI
because the first hrtimer event is already in the past.
The recent introduction of the timer pull model (7ee988770326 ("timers:
Implement the hierarchical pull model")) amplifies this problem, if the
current migrator is one of the non woken up CPUs. When a non pinned timer
list timer is queued and the queuing CPU goes idle, it relies on the still
suspended migrator CPU to expire the timer which will happen by chance.
The problem exists since commit 8d89835b0467 ("PM: suspend: Do not pause
cpuidle in the suspend-to-idle path"). There the cpuidle_pause() call which
in turn invoked a wakeup for all idle CPUs was moved to a later point in
the resume process. This might not be reached or reached very late because
it waits on a timer of a still suspended CPU.
Address this by kicking all CPUs out of idle after the control CPU returns
from swait() so that they resume their timers and restore consistent system
state.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218641
Fixes: 8d89835b0467 ("PM: suspend: Do not pause cpuidle in the suspend-to-idle path")
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: 5.16+ <stable@kernel.org> # 5.16+
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsytem:
- rtc_class is now const
Drivers:
- ds1511: cleanup, set date and time range and alarm offset limit
- max31335: fix interrupt handler
- pcf8523: improve suspend support"
* tag 'rtc-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (28 commits)
MAINTAINER: Include linux-arm-msm for Qualcomm RTC patches
dt-bindings: rtc: zynqmp: Add support for Versal/Versal NET SoCs
rtc: class: make rtc_class constant
dt-bindings: rtc: abx80x: Improve checks on trickle charger constraints
MAINTAINERS: adjust file entry in ARM/Mediatek RTC DRIVER
rtc: nct3018y: fix possible NULL dereference
rtc: max31335: fix interrupt status reg
rtc: mt6397: select IRQ_DOMAIN instead of depending on it
dt-bindings: rtc: abx80x: convert to yaml
rtc: m41t80: Use the unified property API get the wakeup-source property
dt-bindings: at91rm9260-rtt: add sam9x7 compatible
dt-bindings: rtc: convert MT7622 RTC to the json-schema
dt-bindings: rtc: convert MT2717 RTC to the json-schema
rtc: pcf8523: add suspend handlers for alarm IRQ
rtc: ds1511: set alarm offset limit
rtc: ds1511: set range
rtc: ds1511: drop inline/noinline hints
rtc: ds1511: rename pdata
rtc: ds1511: implement ds1511_rtc_read_alarm properly
rtc: ds1511: remove partial alarm support
...
|
|
The EM only supports power in uW. Make sure that it is not possible to
register some downstream driver which doesn't provide power in uW.
The only exception is artificial EM, but that EM is ignored by the rest of
kernel frameworks (thermal, powercap, etc).
Reported-by: PoShao Chen <poshao.chen@mediatek.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"From the functional perspective, the most significant change here is
the addition of support for Energy Models that can be updated
dynamically at run time.
There is also the addition of LZ4 compression support for hibernation,
the new preferred core support in amd-pstate, new platforms support in
the Intel RAPL driver, new model-specific EPP handling in intel_pstate
and more.
Apart from that, the cpufreq default transition delay is reduced from
10 ms to 2 ms (along with some related adjustments), the system
suspend statistics code undergoes a significant rework and there is a
usual bunch of fixes and code cleanups all over.
Specifics:
- Allow the Energy Model to be updated dynamically (Lukasz Luba)
- Add support for LZ4 compression algorithm to the hibernation image
creation and loading code (Nikhil V)
- Fix and clean up system suspend statistics collection (Rafael
Wysocki)
- Simplify device suspend and resume handling in the power management
core code (Rafael Wysocki)
- Fix PCI hibernation support description (Yiwei Lin)
- Make hibernation take set_memory_ro() return values into account as
appropriate (Christophe Leroy)
- Set mem_sleep_current during kernel command line setup to avoid an
ordering issue with handling it (Maulik Shah)
- Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
driver's system suspend callback (Qingliang Li)
- Simplify pm_runtime_get_if_active() usage and add a replacement for
pm_runtime_put_autosuspend() (Sakari Ailus)
- Add a tracepoint for runtime_status changes tracking (Vilas Bhat)
- Fix section title markdown in the runtime PM documentation (Yiwei
Lin)
- Enable preferred core support in the amd-pstate cpufreq driver
(Meng Li)
- Fix min_perf assignment in amd_pstate_adjust_perf() and make the
min/max limit perf values in amd-pstate always stay within the
(highest perf, lowest perf) range (Tor Vic, Meng Li)
- Allow intel_pstate to assign model-specific values to strings used
in the EPP sysfs interface and make it do so on Meteor Lake
(Srinivas Pandruvada)
- Drop long-unused cpudata::prev_cummulative_iowait from the
intel_pstate cpufreq driver (Jiri Slaby)
- Prevent scaling_cur_freq from exceeding scaling_max_freq when the
latter is an inefficient frequency (Shivnandan Kumar)
- Change default transition delay in cpufreq to 2ms (Qais Yousef)
- Remove references to 10ms minimum sampling rate from comments in
the cpufreq code (Pierre Gondois)
- Honour transition_latency over transition_delay_us in cpufreq (Qais
Yousef)
- Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar)
- General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
Belova)
- Update cpufreq-dt-platdev to block/approve devices (Richard Acayan)
- Make the SCMI cpufreq driver get a transition delay value from
firmware (Pierre Gondois)
- Prevent the haltpoll cpuidle governor from shrinking guest
poll_limit_ns below grow_start (Parshuram Sangle)
- Avoid potential overflow in integer multiplication when computing
cpuidle state parameters (C Cheng)
- Adjust MWAIT hint target C-state computation in the ACPI cpuidle
driver and in intel_idle to return a correct value for C0 (He
Rongguang)
- Address multiple issues in the TPMI RAPL driver and add support for
new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui)
- Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
Lezcano)
- Fix kernel-doc for dtpm_create_hierarchy() (Yang Li)
- Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
Norway Ananda)
- Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil)
- Fix a couple of warnings in the OPP core code related to W=1 builds
(Viresh Kumar)
- Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
Kumar)
- Extend dev_pm_opp_data with turbo support (Sibi Sankar)
- dt-bindings: drop maxItems from inner items (David Heidelberg)"
* tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (95 commits)
dt-bindings: opp: drop maxItems from inner items
OPP: debugfs: Fix warning around icc_get_name()
OPP: debugfs: Fix warning with W=1 builds
cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h
OPP: Extend dev_pm_opp_data with turbo support
Fix cpupower-frequency-info.1 man page typo
cpufreq: scmi: Set transition_delay_us
firmware: arm_scmi: Populate fast channel rate_limit
firmware: arm_scmi: Populate perf commands rate_limit
cpuidle: ACPI/intel: fix MWAIT hint target C-state computation
PM: sleep: wakeirq: fix wake irq warning in system suspend
powercap: dtpm: Fix kernel-doc for dtpm_create_hierarchy() function
cpufreq: Don't unregister cpufreq cooling on CPU hotplug
PM: suspend: Set mem_sleep_current during kernel command line setup
cpufreq: Honour transition_latency over transition_delay_us
cpufreq: Limit resolving a frequency to policy min/max
Documentation: PM: Fix runtime_pm.rst markdown syntax
cpufreq: amd-pstate: adjust min/max limit perf
cpufreq: Remove references to 10ms min sampling rate
cpufreq: intel_pstate: Update default EPPs for Meteor Lake
...
|
|
Merge Enery Model changes for 6.9-rc1:
- Allow the Energy Model to be updated dynamically (Lukasz Luba).
* pm-em: (24 commits)
PM: EM: Fix nr_states warnings in static checks
Documentation: EM: Update with runtime modification design
PM: EM: Add em_dev_compute_costs()
PM: EM: Remove old table
PM: EM: Change debugfs configuration to use runtime EM table data
drivers/thermal/devfreq_cooling: Use new Energy Model interface
drivers/thermal/cpufreq_cooling: Use new Energy Model interface
powercap/dtpm_devfreq: Use new Energy Model interface to get table
powercap/dtpm_cpu: Use new Energy Model interface to get table
PM: EM: Optimize em_cpu_energy() and remove division
PM: EM: Support late CPUs booting and capacity adjustment
PM: EM: Add performance field to struct em_perf_state and optimize
PM: EM: Add em_perf_state_from_pd() to get performance states table
PM: EM: Introduce em_dev_update_perf_domain() for EM updates
PM: EM: Add functions for memory allocations for new EM tables
PM: EM: Use runtime modified EM for CPUs energy estimation in EAS
PM: EM: Introduce runtime modifiable table
PM: EM: Split the allocation and initialization of the EM table
PM: EM: Check if the get_cost() callback is present in em_compute_costs()
PM: EM: Introduce em_compute_costs()
...
|
|
Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the rtc_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240305-class_cleanup-abelloni-v1-1-944c026137c8@marliere.net
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
psci_init_system_suspend() invokes suspend_set_ops() very early during
bootup even before kernel command line for mem_sleep_default is setup.
This leads to kernel command line mem_sleep_default=s2idle not working
as mem_sleep_current gets changed to deep via suspend_set_ops() and never
changes back to s2idle.
Set mem_sleep_current along with mem_sleep_default during kernel command
line setup as default suspend mode.
Fixes: faf7ec4a92c0 ("drivers: firmware: psci: add system suspend support")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-6-adbd023e19cc@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
During the static checks nr_states has been mentioned by the kernel test
robot. Fix the warning in those 2 places.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
set_memory_ro() and set_memory_rw() can fail, leaving memory
unprotected.
Take the returned value into account and abort in case of
failure.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently the default compression algorithm is selected based on
compile time options. Introduce a module parameter "hibernate.compressor"
to override this behaviour.
Different compression algorithms have different characteristics and
hibernation may benefit when it uses any of these algorithms, especially
when a secondary algorithm(LZ4) offers better decompression speeds over
a default algorithm(LZO), which in turn reduces hibernation image
restore time.
Users can override the default algorithm in two ways:
1) Passing "hibernate.compressor" as kernel command line parameter.
Usage:
LZO: hibernate.compressor=lzo
LZ4: hibernate.compressor=lz4
2) Specifying the algorithm at runtime.
Usage:
LZO: echo lzo > /sys/module/hibernate/parameters/compressor
LZ4: echo lz4 > /sys/module/hibernate/parameters/compressor
Currently LZO and LZ4 are the supported algorithms. LZO is the default
compression algorithm used with hibernation.
Signed-off-by: Nikhil V <quic_nprakash@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The device drivers can modify EM at runtime by providing a new EM table.
The EM is used by the EAS and the em_perf_state::cost stores
pre-calculated value to avoid overhead. This patch provides the API for
device drivers to calculate the cost values properly (and not duplicate
the same code).
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Remove the old EM table which wasn't able to modify the data. Clean the
unneeded function and refactor the code a bit.
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Dump the runtime EM table values which can be modified in time. In order
to do that allocate chunk of debug memory which can be later freed
automatically thanks to devm_kcalloc().
This design can handle the fact that the EM table memory can change
after EM update, so debug code cannot use the pointer from initialization
phase.
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Energy Model (EM) can be modified at runtime which brings new
possibilities. The em_cpu_energy() is called by the Energy Aware Scheduler
(EAS) in its hot path. The energy calculation uses power value for
a given performance state (ps) and the CPU busy time as percentage for that
given frequency.
It is possible to avoid the division by 'scale_cpu' at runtime, because
EM is updated whenever new max capacity CPU is set in the system.
Use that feature and do the needed division during the calculation of the
coefficient 'ps->cost'. That enhanced 'ps->cost' value can be then just
multiplied simply by utilization:
pd_nrg = ps->cost * \Sum cpu_util
to get the needed energy for whole Performance Domain (PD).
With this optimization and earlier removal of map_util_freq(), the
em_cpu_energy() should run faster on the Big CPU by 1.43x and on the Little
CPU by 1.69x (RockPi 4B board).
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The patch adds needed infrastructure to handle the late CPUs boot, which
might change the previous CPUs capacity values. With this changes the new
CPUs which try to register EM will trigger the needed re-calculations for
other CPUs EMs. Thanks to that the em_per_state::performance values will
be aligned with the CPU capacity information after all CPUs finish the
boot and EM registrations.
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The performance doesn't scale linearly with the frequency. Also, it may
be different in different workloads. Some CPUs are designed to be
particularly good at some applications e.g. images or video processing
and other CPUs in different. When those different types of CPUs are
combined in one SoC they should be properly modeled to get max of the HW
in Energy Aware Scheduler (EAS). The Energy Model (EM) provides the
power vs. performance curves to the EAS, but assumes the CPUs capacity
is fixed and scales linearly with the frequency. This patch allows to
adjust the curve on the 'performance' axis as well.
Code speed optimization:
Removing map_util_freq() allows to avoid one division and one
multiplication operations from the EAS hot code path.
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add API function em_dev_update_perf_domain() which allows the EM to be
changed safely.
Concurrent updaters are serialized with a mutex and the removal of memory
that will not be used any more is carried out with the help of RCU.
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The runtime modified EM table can be provided from drivers. Create
mechanism which allows safely allocate and free the table for device
drivers. The same table can be used by the EAS in task scheduler code
paths, so make sure the memory is not freed when the device driver module
is unloaded.
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The new runtime table can be populated with a new power data to better
reflect the actual efficiency of the device e.g. CPU. The power can vary
over time e.g. due to the SoC temperature change. Higher temperature can
increase power values. For longer running scenarios, such as game or
camera, when also other devices are used (e.g. GPU, ISP) the CPU power can
change. The new EM framework is able to addresses this issue and change
the EM data at runtime safely.
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Split the process of allocation and data initialization for the EM table.
The upcoming changes for modifiable EM will use it.
This change is not expected to alter the general functionality.
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Subsequent changes will introduce a case in which 'cb->get_cost' may
not be set in em_compute_costs(), so add a check to ensure that it is
not NULL before attempting to dereference it.
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Move the EM costs computation code into a new dedicated function,
em_compute_costs(), that can be reused in other places in the future.
This change is not expected to alter the general functionality.
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Energy Model might be updated at runtime and the energy efficiency
for each OPP may change. Thus, there is a need to update also the
cpufreq framework and make it aligned to the new values. In order to
do that, use a first active CPU from the Performance Domain. This is
needed since the first CPU in the cpumask might be offline when we
run this code path.
Reviewed-by: Hongyan Xia <hongyan.xia2@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In order to prepare the code for the modifiable EM perf_state table,
make em_cpufreq_update_efficiencies() take a pointer to the EM table
as its second argument and modify it to use that new argument instead
of the 'table' member of dev->em_pd.
No functional impact.
Reviewed-by: Hongyan Xia <hongyan.xia2@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fix missing newline for the string long in the error code path.
Reviewed-by: Hongyan Xia <hongyan.xia2@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Extend the support for LZ4 compression to be used with hibernation.
The main idea is that different compression algorithms
have different characteristics and hibernation may benefit when it uses
any of these algorithms: a default algorithm, having higher
compression rate but is slower(compression/decompression) and a
secondary algorithm, that is faster(compression/decompression) but has
lower compression rate.
LZ4 algorithm has better decompression speeds over LZO. This reduces
the hibernation image restore time.
As per test results:
LZO LZ4
Size before Compression(bytes) 682696704 682393600
Size after Compression(bytes) 146502402 155993547
Decompression Rate 335.02 MB/s 501.05 MB/s
Restore time 4.4s 3.8s
LZO is the default compression algorithm used for hibernation. Enable
CONFIG_HIBERNATION_COMP_LZ4 to set the default compressor as LZ4.
Signed-off-by: Nikhil V <quic_nprakash@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently for hibernation, LZO is the only compression algorithm
available and uses the existing LZO library calls. However, there
is no flexibility to switch to other algorithms which provides better
results. The main idea is that different compression algorithms have
different characteristics and hibernation may benefit when it uses
alternate algorithms.
By moving to crypto based APIs, it lays a foundation to use other
compression algorithms for hibernation. There are no functional changes
introduced by this approach.
Signed-off-by: Nikhil V <quic_nprakash@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Renaming lzo* to generic names, except for lzo_xxx() APIs. This is
used in the next patch where we move to crypto based APIs for
compression. There are no functional changes introduced by this
approach.
Signed-off-by: Nikhil V <quic_nprakash@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Because dpm_save_failed_dev() may be called simultaneously by multiple
failing device PM functions, the state of the suspend_stats fields
updated by it may become inconsistent.
Prevent that from happening by using a lock in dpm_save_failed_dev().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
It is not necessary to define struct suspend_stats in a header file and the
suspend_stats variable in the core device system-wide PM code. They both
can be defined in kernel/power/main.c, next to the sysfs and debugfs code
accessing suspend_stats, which can be static.
Modify the code in question in accordance with the above observation and
replace the static inline functions manipulating suspend_stats with
regular ones defined in kernel/power/main.c.
While at it, move the enum suspend_stat_step to the end of suspend.h which
is a more suitable place for it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Change the type of the "success" and "fail" fields in struct
suspend_stats to unsigned int, because they cannot be negative.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
|
