summaryrefslogtreecommitdiff
path: root/mm/page_owner.c
AgeCommit message (Collapse)Author
2022-10-03mm: reuse pageblock_start/end_pfn() macroKefeng Wang
Move pageblock_start_pfn/pageblock_end_pfn() into pageblock-flags.h, then they could be used somewhere else, not only in compaction, also use ALIGN_DOWN() instead of round_down() to be pair with ALIGN(), which should be same for pageblock usage. Link: https://lkml.kernel.org/r/20220907060844.126891-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-03mm/page_owner.c: remove redundant drain_all_pagesZhenhua Huang
Remove an expensive and unnecessary operation as PCP pages are safely skipped when reading page owner.PCP pages can be skipped because PAGE_EXT_OWNER_ALLOCATED is cleared. With draining PCP pages, these pages are moved to buddy list so they can be identified as buddy pages and skipped quickly. Although it improved efficiency of PFN walker, the drain is guaranteed expensive that is unlikely to be offset by a slight increase in efficiency when skipping free pages. PAGE_EXT_OWNER_ALLOCATED is cleared in the page owner reset path below: free_unref_page -> free_unref_page_prepare -> free_pcp_prepare -> free_pages_prepare which do page owner reset -> free_unref_page_commit which add pages into pcp list Link: https://lkml.kernel.org/r/1662704326-15899-1-git-send-email-quic_zhenhuah@quicinc.com Link: https://lkml.kernel.org/r/1662633204-10044-1-git-send-email-quic_zhenhuah@quicinc.com Link: https://lkml.kernel.org/r/1662537673-9392-1-git-send-email-quic_zhenhuah@quicinc.com Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-11mm/page_owner.c: add llseek for page_ownerKassey Li
It is too slow to dump all the pages, in some usage we just want to dump a given start pfn, for example: a CMA range or a single page. To speed up and save time, this change allows specifying of a start pfn by adding llseek for page_owner. Link: https://lkml.kernel.org/r/20220818022425.31056-1-quic_yingangl@quicinc.com Signed-off-by: Kassey Li <quic_yingangl@quicinc.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-11mm: fix use-after free of page_ext after race with memory-offlineCharan Teja Kalla
The below is one path where race between page_ext and offline of the respective memory blocks will cause use-after-free on the access of page_ext structure. process1 process2 --------- --------- a)doing /proc/page_owner doing memory offline through offline_pages. b) PageBuddy check is failed thus proceed to get the page_owner information through page_ext access. page_ext = lookup_page_ext(page); migrate_pages(); ................. Since all pages are successfully migrated as part of the offline operation,send MEM_OFFLINE notification where for page_ext it calls: offline_page_ext()--> __free_page_ext()--> free_page_ext()--> vfree(ms->page_ext) mem_section->page_ext = NULL c) Check for the PAGE_EXT flags in the page_ext->flags access results into the use-after-free (leading to the translation faults). As mentioned above, there is really no synchronization between page_ext access and its freeing in the memory_offline. The memory offline steps(roughly) on a memory block is as below: 1) Isolate all the pages 2) while(1) try free the pages to buddy.(->free_list[MIGRATE_ISOLATE]) 3) delete the pages from this buddy list. 4) Then free page_ext.(Note: The struct page is still alive as it is freed only during hot remove of the memory which frees the memmap, which steps the user might not perform). This design leads to the state where struct page is alive but the struct page_ext is freed, where the later is ideally part of the former which just representing the page_flags (check [3] for why this design is chosen). The abovementioned race is just one example __but the problem persists in the other paths too involving page_ext->flags access(eg: page_is_idle())__. Fix all the paths where offline races with page_ext access by maintaining synchronization with rcu lock and is achieved in 3 steps: 1) Invalidate all the page_ext's of the sections of a memory block by storing a flag in the LSB of mem_section->page_ext. 2) Wait until all the existing readers to finish working with the ->page_ext's with synchronize_rcu(). Any parallel process that starts after this call will not get page_ext, through lookup_page_ext(), for the block parallel offline operation is being performed. 3) Now safely free all sections ->page_ext's of the block on which offline operation is being performed. Note: If synchronize_rcu() takes time then optimizations can be done in this path through call_rcu()[2]. Thanks to David Hildenbrand for his views/suggestions on the initial discussion[1] and Pavan kondeti for various inputs on this patch. [1] https://lore.kernel.org/linux-mm/59edde13-4167-8550-86f0-11fc67882107@quicinc.com/ [2] https://lore.kernel.org/all/a26ce299-aed1-b8ad-711e-a49e82bdd180@quicinc.com/T/#u [3] https://lore.kernel.org/all/6fa6b7aa-731e-891c-3efb-a03d6a700efa@redhat.com/ [quic_charante@quicinc.com: rename label `loop' to `ext_put_continue' per David] Link: https://lkml.kernel.org/r/1661496993-11473-1-git-send-email-quic_charante@quicinc.com Link: https://lkml.kernel.org/r/1660830600-9068-1-git-send-email-quic_charante@quicinc.com Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com> Suggested-by: David Hildenbrand <david@redhat.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Fernand Sieber <sieberf@amazon.com> Cc: Minchan Kim <minchan@google.com> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Pavan Kondeti <quic_pkondeti@quicinc.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-26Merge tag 'mm-stable-2022-05-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "Almost all of MM here. A few things are still getting finished off, reviewed, etc. - Yang Shi has improved the behaviour of khugepaged collapsing of readonly file-backed transparent hugepages. - Johannes Weiner has arranged for zswap memory use to be tracked and managed on a per-cgroup basis. - Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for runtime enablement of the recent huge page vmemmap optimization feature. - Baolin Wang contributes a series to fix some issues around hugetlb pagetable invalidation. - Zhenwei Pi has fixed some interactions between hwpoisoned pages and virtualization. - Tong Tiangen has enabled the use of the presently x86-only page_table_check debugging feature on arm64 and riscv. - David Vernet has done some fixup work on the memcg selftests. - Peter Xu has taught userfaultfd to handle write protection faults against shmem- and hugetlbfs-backed files. - More DAMON development from SeongJae Park - adding online tuning of the feature and support for monitoring of fixed virtual address ranges. Also easier discovery of which monitoring operations are available. - Nadav Amit has done some optimization of TLB flushing during mprotect(). - Neil Brown continues to labor away at improving our swap-over-NFS support. - David Hildenbrand has some fixes to anon page COWing versus get_user_pages(). - Peng Liu fixed some errors in the core hugetlb code. - Joao Martins has reduced the amount of memory consumed by device-dax's compound devmaps. - Some cleanups of the arch-specific pagemap code from Anshuman Khandual. - Muchun Song has found and fixed some errors in the TLB flushing of transparent hugepages. - Roman Gushchin has done more work on the memcg selftests. ... and, of course, many smaller fixes and cleanups. Notably, the customary million cleanup serieses from Miaohe Lin" * tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits) mm: kfence: use PAGE_ALIGNED helper selftests: vm: add the "settings" file with timeout variable selftests: vm: add "test_hmm.sh" to TEST_FILES selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests selftests: vm: add migration to the .gitignore selftests/vm/pkeys: fix typo in comment ksm: fix typo in comment selftests: vm: add process_mrelease tests Revert "mm/vmscan: never demote for memcg reclaim" mm/kfence: print disabling or re-enabling message include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace" include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion" mm: fix a potential infinite loop in start_isolate_page_range() MAINTAINERS: add Muchun as co-maintainer for HugeTLB zram: fix Kconfig dependency warning mm/shmem: fix shmem folio swapoff hang cgroup: fix an error handling path in alloc_pagecache_max_30M() mm: damon: use HPAGE_PMD_SIZE tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate nodemask.h: fix compilation error with GCC12 ...
2022-05-19mm/page_owner.c: add missing __initdata attributeFanjun Kong
This patch fixes two issues: 1. Add __initdata attribute according to include/linux/init.h: For initialized data: You should insert __initdata between the variable name and equal sign followed by value 2. Fix below error reported by checkpatch.pl: ERROR: do not initialise statics to false Special thanks to Muchun Song :) Link: https://lkml.kernel.org/r/20220516030039.1487005-1-bh1scw@gmail.com Signed-off-by: Fanjun Kong <bh1scw@gmail.com> Suggested-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13mm/page_owner: use strscpy() instead of strlcpy()Eric Dumazet
current->comm[] is not a string (no guarantee for a zero byte in it). strlcpy(s1, s2, l) is calling strlen(s2), potentially causing out-of-bound access, as reported by syzbot: detected buffer overflow in __fortify_strlen ------------[ cut here ]------------ kernel BUG at lib/string_helpers.c:980! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 4087 Comm: dhcpcd-run-hooks Not tainted 5.18.0-rc3-syzkaller-01537-g20b87e7c29df #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:fortify_panic+0x18/0x1a lib/string_helpers.c:980 Code: 8c e8 c5 ba e1 fa e9 23 0f bf fa e8 0b 5d 8c f8 eb db 55 48 89 fd e8 e0 49 40 f8 48 89 ee 48 c7 c7 80 f5 26 8a e8 99 09 f1 ff <0f> 0b e8 ca 49 40 f8 48 8b 54 24 18 4c 89 f1 48 c7 c7 00 00 27 8a RSP: 0018:ffffc900000074a8 EFLAGS: 00010286 RAX: 000000000000002c RBX: ffff88801226b728 RCX: 0000000000000000 RDX: ffff8880198e0000 RSI: ffffffff81600458 RDI: fffff52000000e87 RBP: ffffffff89da2aa0 R08: 000000000000002c R09: 0000000000000000 R10: ffffffff815fae2e R11: 0000000000000000 R12: ffff88801226b700 R13: ffff8880198e0830 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f5876ad6ff8 CR3: 000000001a48c000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Call Trace: <IRQ> __fortify_strlen include/linux/fortify-string.h:128 [inline] strlcpy include/linux/fortify-string.h:143 [inline] __set_page_owner_handle+0x2b1/0x3e0 mm/page_owner.c:171 __set_page_owner+0x3e/0x50 mm/page_owner.c:190 prep_new_page mm/page_alloc.c:2441 [inline] get_page_from_freelist+0xba2/0x3e00 mm/page_alloc.c:4182 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5408 alloc_pages+0x1aa/0x310 mm/mempolicy.c:2272 alloc_slab_page mm/slub.c:1799 [inline] allocate_slab+0x26c/0x3c0 mm/slub.c:1944 new_slab mm/slub.c:2004 [inline] ___slab_alloc+0x8df/0xf20 mm/slub.c:3005 __slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3092 slab_alloc_node mm/slub.c:3183 [inline] slab_alloc mm/slub.c:3225 [inline] __kmem_cache_alloc_lru mm/slub.c:3232 [inline] kmem_cache_alloc+0x360/0x3b0 mm/slub.c:3242 dst_alloc+0x146/0x1f0 net/core/dst.c:92 Link: https://lkml.kernel.org/r/20220509145949.265184-1-eric.dumazet@gmail.com Fixes: 865ed6a32786 ("mm/page_owner: record task command name") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Waiman Long <longman@redhat.com> Acked-by: Shakeel Butt <shakeelb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-06lib/stackdepot: allow requesting early initialization dynamicallyVlastimil Babka
In a later patch we want to add stackdepot support for object owner tracking in slub caches, which is enabled by slub_debug boot parameter. This creates a bootstrap problem as some caches are created early in boot when slab_is_available() is false and thus stack_depot_init() tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are already beyond memblock_free_all(). Ideally memblock allocation should fail, yet it succeeds, but later the system crashes, which is a separately handled issue. To resolve this boostrap issue in a robust way, this patch adds another way to request stack_depot_early_init(), which happens at a well-defined point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT, code that's e.g. processing boot parameters (which happens early enough) can call a new function stack_depot_want_early_init(), which sets a flag that stack_depot_early_init() will check. In this patch we also convert page_owner to this approach. While it doesn't have the bootstrap issue as slub, it's also a functionality enabled by a boot param and can thus request stack_depot_early_init() with memblock allocation instead of later initialization with kvmalloc(). As suggested by Mike, make stack_depot_early_init() only attempt memblock allocation and stack_depot_init() only attempt kvmalloc(). Also change the latter to kvcalloc(). In both cases we can lose the explicit array zeroing, which the allocations do already. As suggested by Marco, provide empty implementations of the init functions for !CONFIG_STACKDEPOT builds to simplify the callers. [1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/ Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Suggested-by: Marco Elver <elver@google.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Marco Elver <elver@google.com> Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: David Rientjes <rientjes@google.com>
2022-03-24mm/page_owner.c: record tgidYixuan Cao
In a single-threaded process, the pid in kernel task_struct is the same as the tgid, which can mark the process of page allocation. But in a multithreaded process, only the task_struct of the thread leader has the same pid as tgid, and the pids of other threads are different from tgid. Therefore, tgid is recorded to provide effective information for debugging and data statistics of multithreaded programs. This can also be achieved by observing the task name (executable file name) for a specific process. However, when the same program is started multiple times, the task name is the same and the tgid is different. Therefore, in the debugging of multi-threaded programs, combined with the task name and tgid, more accurate runtime information of a certain run of the program can be obtained. Link: https://lkml.kernel.org/r/20220219180450.2399-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Waiman Long <longman@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24mm/page_owner: record task command nameWaiman Long
The page_owner information currently includes the pid of the calling task. That is useful as long as the task is still running. Otherwise, the number is meaningless. To have more information about the allocating tasks that had exited by the time the page_owner information is retrieved, we need to store the command name of the task. Add a new comm field into page_owner structure to store the command name and display it when the page_owner information is retrieved. Link: https://lkml.kernel.org/r/20220202203036.744010-5-longman@redhat.com Signed-off-by: Waiman Long <longman@redhat.com> Acked-by: Rafael Aquini <aquini@redhat.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24mm/page_owner: print memcg informationWaiman Long
It was found that a number of offline memcgs were not freed because they were pinned by some charged pages that were present. Even "echo 1 > /proc/sys/vm/drop_caches" wasn't able to free those pages. These offline but not freed memcgs tend to increase in number over time with the side effect that percpu memory consumption as shown in /proc/meminfo also increases over time. In order to find out more information about those pages that pin offline memcgs, the page_owner feature is extended to print memory cgroup information especially whether the cgroup is offline or not. RCU read lock is taken when memcg is being accessed to make sure that it won't be freed. Link: https://lkml.kernel.org/r/20220202203036.744010-4-longman@redhat.com Signed-off-by: Waiman Long <longman@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: Rafael Aquini <aquini@redhat.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24mm/page_owner: use scnprintf() to avoid excessive buffer overrun checkWaiman Long
The snprintf() function can return a length greater than the given input size. That will require a check for buffer overrun after each invocation of snprintf(). scnprintf(), on the other hand, will never return a greater length. By using scnprintf() in selected places, we can avoid some buffer overrun checks except after stack_depot_snprint() and after the last snprintf(). Link: https://lkml.kernel.org/r/20220202203036.744010-3-longman@redhat.com Signed-off-by: Waiman Long <longman@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Acked-by: Rafael Aquini <aquini@redhat.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-22lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()Vlastimil Babka
Currently, enabling CONFIG_STACKDEPOT means its stack_table will be allocated from memblock, even if stack depot ends up not actually used. The default size of stack_table is 4MB on 32-bit, 8MB on 64-bit. This is fine for use-cases such as KASAN which is also a config option and has overhead on its own. But it's an issue for functionality that has to be actually enabled on boot (page_owner) or depends on hardware (GPU drivers) and thus the memory might be wasted. This was raised as an issue [1] when attempting to add stackdepot support for SLUB's debug object tracking functionality. It's common to build kernels with CONFIG_SLUB_DEBUG and enable slub_debug on boot only when needed, or create only specific kmem caches with debugging for testing purposes. It would thus be more efficient if stackdepot's table was allocated only when actually going to be used. This patch thus makes the allocation (and whole stack_depot_init() call) optional: - Add a CONFIG_STACKDEPOT_ALWAYS_INIT flag to keep using the current well-defined point of allocation as part of mem_init(). Make CONFIG_KASAN select this flag. - Other users have to call stack_depot_init() as part of their own init when it's determined that stack depot will actually be used. This may depend on both config and runtime conditions. Convert current users which are page_owner and several in the DRM subsystem. Same will be done for SLUB later. - Because the init might now be called after the boot-time memblock allocation has given all memory to the buddy allocator, change stack_depot_init() to allocate stack_table with kvmalloc() when memblock is no longer available. Also handle allocation failure by disabling stackdepot (could have theoretically happened even with memblock allocation previously), and don't unnecessarily align the memblock allocation to its own size anymore. [1] https://lore.kernel.org/all/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXEhCvbZyA@mail.gmail.com/ Link: https://lkml.kernel.org/r/20211013073005.11351-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Marco Elver <elver@google.com> # stackdepot Cc: Marco Elver <elver@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Glitta <glittao@gmail.com> Cc: Imran Khan <imran.f.khan@oracle.com> From: Colin Ian King <colin.king@canonical.com> Subject: lib/stackdepot: fix spelling mistake and grammar in pr_err message There is a spelling mistake of the work allocation so fix this and re-phrase the message to make it easier to read. Link: https://lkml.kernel.org/r/20211015104159.11282-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Vlastimil Babka <vbabka@suse.cz> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup On FLATMEM, we call page_ext_init_flatmem_late() just before kmem_cache_init() which means stack_depot_init() (called by page owner init) will not recognize properly it should use kvmalloc() and not memblock_alloc(). memblock_alloc() will also not issue a warning and return a block memory that can be invalid and cause kernel page fault when saving stacks, as reported by the kernel test robot [1]. Fix this by moving page_ext_init_flatmem_late() below kmem_cache_init() so that slab_is_available() is true during stack_depot_init(). SPARSEMEM doesn't have this issue, as it doesn't do page_ext_init_flatmem_late(), but a different page_ext_init() even later in the boot process. Thanks to Mike Rapoport for pointing out the FLATMEM init ordering issue. While at it, also actually resolve a checkpatch warning in stack_depot_init() from DRM CI, which was supposed to be in the original patch already. [1] https://lore.kernel.org/all/20211014085450.GC18719@xsang-OptiPlex-9020/ Link: https://lkml.kernel.org/r/6abd9213-19a9-6d58-cedc-2414386d2d81@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: kernel test robot <oliver.sang@intel.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup3 Due to cd06ab2fd48f ("drm/locking: add backtrace for locking contended locks without backoff") landing recently to -next adding a new stack depot user in drivers/gpu/drm/drm_modeset_lock.c we need to add an appropriate call to stack_depot_init() there as well. Link: https://lkml.kernel.org/r/2a692365-cfa1-64f2-34e0-8aa5674dce5e@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Marco Elver <elver@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Glitta <glittao@gmail.com> Cc: Imran Khan <imran.f.khan@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup4 Due to 4e66934eaadc ("lib: add reference counting tracking infrastructure") landing recently to net-next adding a new stack depot user in lib/ref_tracker.c we need to add an appropriate call to stack_depot_init() there as well. Link: https://lkml.kernel.org/r/45c1b738-1a2f-5b5f-2f6d-86fab206d01c@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Slab <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15mm: make some vars and functions static or __initTing Liu
"page_idle_ops" as a global var, but its scope of use within this document. So it should be static. "page_ext_ops" is a var used in the kernel initial phase. And other functions are aslo used in the kernel initial phase. So they should be __init or __initdata to reclaim memory. Link: https://lkml.kernel.org/r/20211217095023.67293-1-liuting.0x7c00@bytedance.com Signed-off-by: Ting Liu <liuting.0x7c00@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-11mm/page_owner.c: modify the type of argument "order" in some functionsYixuan Cao
The type of "order" in struct page_owner is unsigned short. However, it is unsigned int in the following 3 functions: __reset_page_owner __set_page_owner_handle __set_page_owner_handle The type of "order" in argument list is unsigned int, which is inconsistent. [akpm@linux-foundation.org: update include/linux/page_owner.h] Link: https://lkml.kernel.org/r/20211020125945.47792-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-09Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: "87 patches. Subsystems affected by this patch series: mm (pagecache and hugetlb), procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs, init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork, sysvfs, kcov, gdb, resource, selftests, and ipc" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits) ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL ipc: check checkpoint_restore_ns_capable() to modify C/R proc files selftests/kselftest/runner/run_one(): allow running non-executable files virtio-mem: disallow mapping virtio-mem memory via /dev/mem kernel/resource: disallow access to exclusive system RAM regions kernel/resource: clean up and optimize iomem_is_exclusive() scripts/gdb: handle split debug for vmlinux kcov: replace local_irq_save() with a local_lock_t kcov: avoid enable+disable interrupts if !in_task() kcov: allocate per-CPU memory on the relevant node Documentation/kcov: define `ip' in the example Documentation/kcov: include types.h in the example sysv: use BUILD_BUG_ON instead of runtime check kernel/fork.c: unshare(): use swap() to make code cleaner seq_file: fix passing wrong private data seq_file: move seq_escape() to a header signal: remove duplicate include in signal.h crash_dump: remove duplicate include in crash_dump.h crash_dump: fix boolreturn.cocci warning hfs/hfsplus: use WARN_ON for sanity check ...
2021-11-09lib, stackdepot: add helper to print stack entries into bufferImran Khan
To print stack entries into a buffer, users of stackdepot, first get a list of stack entries using stack_depot_fetch and then print this list into a buffer using stack_trace_snprint. Provide a helper in stackdepot for this purpose. Also change above mentioned users to use this helper. [imran.f.khan@oracle.com: fix build error] Link: https://lkml.kernel.org/r/20210915175321.3472770-4-imran.f.khan@oracle.com [imran.f.khan@oracle.com: export stack_depot_snprint() to modules] Link: https://lkml.kernel.org/r/20210916133535.3592491-4-imran.f.khan@oracle.com Link: https://lkml.kernel.org/r/20210915014806.3206938-4-imran.f.khan@oracle.com Signed-off-by: Imran Khan <imran.f.khan@oracle.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Jani Nikula <jani.nikula@intel.com> [i915] Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-09lib, stackdepot: add helper to print stack entriesImran Khan
To print a stack entries, users of stackdepot, first use stack_depot_fetch to get a list of stack entries and then use stack_trace_print to print this list. Provide a helper in stackdepot to print stack entries based on stackdepot handle. Also change above mentioned users to use this helper. Link: https://lkml.kernel.org/r/20210915014806.3206938-3-imran.f.khan@oracle.com Signed-off-by: Imran Khan <imran.f.khan@oracle.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-02Merge tag 'printk-for-5.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Extend %pGp print format to print hex value of the page flags - Use kvmalloc instead of kmalloc to allocate devkmsg buffers - Misc cleanup and warning fixes * tag 'printk-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: vsprintf: Update %pGp documentation about that it prints hex value lib/vsprintf.c: Amend static asserts for format specifier flags vsprintf: Make %pGp print the hex value test_printf: Append strings more efficiently test_printf: Remove custom appending of '|' test_printf: Remove separate page_flags variable test_printf: Make pft array const ia64: don't do IA64_CMPXCHG_DEBUG without CONFIG_PRINTK printk: use gnu_printf format attribute for printk_sprint() printk: avoid -Wsometimes-uninitialized warning printk: use kvmalloc instead of kmalloc for devkmsg_user
2021-10-27vsprintf: Make %pGp print the hex valueMatthew Wilcox (Oracle)
All existing users of %pGp want the hex value as well as the decoded flag names. This looks awkward (passing the same parameter to printf twice), so move that functionality into the core. If we want, we can make that optional with flag arguments to %pGp in the future. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Yafang Shao <laoar.shao@gmail.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20211019142621.2810043-6-willy@infradead.org
2021-10-18mm/migrate: Add folio_migrate_flags()Matthew Wilcox (Oracle)
Turn migrate_page_states() into a wrapper around folio_migrate_flags(). Also convert two functions only called from folio_migrate_flags() to be folio-based. ksm_migrate_page() becomes folio_migrate_ksm() and copy_page_owner() becomes folio_copy_owner(). folio_migrate_flags() alone shrinks by two thirds -- 1967 bytes down to 642 bytes. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz>
2021-09-08mm: remove pfn_valid_within() and CONFIG_HOLES_IN_ZONEMike Rapoport
Patch series "mm: remove pfn_valid_within() and CONFIG_HOLES_IN_ZONE". After recent updates to freeing unused parts of the memory map, no architecture can have holes in the memory map within a pageblock. This makes pfn_valid_within() check and CONFIG_HOLES_IN_ZONE configuration option redundant. The first patch removes them both in a mechanical way and the second patch simplifies memory_hotplug::test_pages_in_a_zone() that had pfn_valid_within() surrounded by more logic than simple if. This patch (of 2): After recent changes in freeing of the unused parts of the memory map and rework of pfn_valid() in arm and arm64 there are no architectures that can have holes in the memory map within a pageblock and so nothing can enable CONFIG_HOLES_IN_ZONE which guards non trivial implementation of pfn_valid_within(). With that, pfn_valid_within() is always hardwired to 1 and can be completely removed. Remove calls to pfn_valid_within() and CONFIG_HOLES_IN_ZONE. Link: https://lkml.kernel.org/r/20210713080035.7464-1-rppt@kernel.org Link: https://lkml.kernel.org/r/20210713080035.7464-2-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29mm/page_owner: constify dump_page_ownerMatthew Wilcox (Oracle)
dump_page_owner() only uses struct page to find the page_ext, and lookup_page_ext() already takes a const argument. Link: https://lkml.kernel.org/r/20210416231531.2521383-4-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-07mm: fix typos in commentsIngo Molnar
Fix ~94 single-word typos in locking code comments, plus a few very obvious grammar mistakes. Link: https://lkml.kernel.org/r/20210322212624.GA1963421@gmail.com Link: https://lore.kernel.org/r/20210322205203.GB1959563@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-30mm: page_owner: detect page_owner recursion via task_structSergei Trofimovich
Before the change page_owner recursion was detected via fetching backtrace and inspecting it for current instruction pointer. It has a few problems: - it is slightly slow as it requires extra backtrace and a linear stack scan of the result - it is too late to check if backtrace fetching required memory allocation itself (ia64's unwinder requires it). To simplify recursion tracking let's use page_owner recursion flag in 'struct task_struct'. The change make page_owner=on work on ia64 by avoiding infinite recursion in: kmalloc() -> __set_page_owner() -> save_stack() -> unwind() [ia64-specific] -> build_script() -> kmalloc() -> __set_page_owner() [we short-circuit here] -> save_stack() -> unwind() [recursion] Link: https://lkml.kernel.org/r/20210402115342.1463781-1-slyfox@gentoo.org Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ben Segall <bsegall@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Daniel Bristot de Oliveira <bristot@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-30mm: page_owner: use kstrtobool() to parse bool optionSergei Trofimovich
I tried to use page_owner=1 for a while noticed too late it had no effect as opposed to similar init_on_alloc=1 (these work). Let's make them consistent. The change decreses binary size slightly: text data bss dec hex filename 12408 321 17 12746 31ca mm/page_owner.o.before 12320 321 17 12658 3172 mm/page_owner.o.after Link: https://lkml.kernel.org/r/20210401210909.3532086-1-slyfox@gentoo.org Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-30mm: page_owner: fetch backtrace only for tracked pagesSergei Trofimovich
Very minor optimization. Link: https://lkml.kernel.org/r/20210401212445.3534721-1-slyfox@gentoo.org Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-30mm, page_owner: remove unused parameter in __set_page_owner_handlezhongjiang-ali
Since commit 5556cfe8d994 ("mm, page_owner: fix off-by-one error in __set_page_owner_handle()") introduced, the parameter 'page' will not used, hence it need to be removed. Link: https://lkml.kernel.org/r/1616602022-43545-1-git-send-email-zhongjiang-ali@linux.alibaba.com Signed-off-by: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-30mm/page_owner: record the timestamp of all pages during freeGeorgi Djakov
Collect the time when each allocation is freed, to help with memory analysis with kdump/ramdump. Add the timestamp also in the page_owner debugfs file and print it in dump_page(). Having another timestamp when we free the page helps for debugging page migration issues. For example both alloc and free timestamps being the same can gave hints that there is an issue with migrating memory, as opposed to a page just being dropped during migration. Link: https://lkml.kernel.org/r/20210203175905.12267-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24mm/page_owner: use helper function zone_end_pfn() to get end_pfnMiaohe Lin
Commit 108bcc96ef70 ("mm: add & use zone_end_pfn() and zone_spans_pfn()") introduced the helper zone_end_pfn() to calculate the zone end pfn. But pagetypeinfo_showmixedcount_print forgot to use it. And the initialization of local variable pfn is duplicated, remove one. Link: https://lkml.kernel.org/r/20210123070538.5861-1-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15mm/page_owner: record timestamp and pidLiam Mark
Collect the time for each allocation recorded in page owner so that allocation "surges" can be measured. Record the pid for each allocation recorded in page owner so that the source of allocation "surges" can be better identified. The above is very useful when doing memory analysis. On a crash for example, we can get this information from kdump (or ramdump) and parse it to figure out memory allocation problems. Please note that on x86_64 this increases the size of struct page_owner from 16 bytes to 32. Vlastimil: it's not a functionality intended for production, so unless somebody says they need to enable page_owner for debugging and this increase prevents them from fitting into available memory, let's not complicate things with making this optional. [lmark@codeaurora.org: v3] Link: https://lkml.kernel.org/r/20201210160357.27779-1-georgi.djakov@linaro.org Link: https://lkml.kernel.org/r/20201209125153.10533-1-georgi.djakov@linaro.org Signed-off-by: Liam Mark <lmark@codeaurora.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16mm: rename page_order() to buddy_order()Matthew Wilcox (Oracle)
The current page_order() can only be called on pages in the buddy allocator. For compound pages, you have to use compound_order(). This is confusing and led to a bug, so rename page_order() to buddy_order(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/20201001152259.14932-2-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16mm/page_owner: change split_page_owner to take a countMatthew Wilcox (Oracle)
The implementation of split_page_owner() prefers a count rather than the old order of the page. When we support a variable size THP, we won't have the order at this point, but we will have the number of pages. So change the interface to what the caller and callee would prefer. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: SeongJae Park <sjpark@amazon.de> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Huang Ying <ying.huang@intel.com> Link: https://lkml.kernel.org/r/20200908195539.25896-4-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03mm: rename gfpflags_to_migratetype to gfp_migratetype for same conventionWei Yang
Pageblock migrate type is encoded in GFP flags, just as zone_type and zonelist. Currently we use gfp_zone() and gfp_zonelist() to extract related information, it would be proper to use the same naming convention for migrate type. Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Link: http://lkml.kernel.org/r/20200329080823.7735-1-richard.weiyang@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-19mm/page_owner: don't access uninitialized memmaps when reading ↵Qian Cai
/proc/pagetypeinfo Uninitialized memmaps contain garbage and in the worst case trigger kernel BUGs, especially with CONFIG_PAGE_POISONING. They should not get touched. For example, when not onlining a memory block that is spanned by a zone and reading /proc/pagetypeinfo with CONFIG_DEBUG_VM_PGFLAGS and CONFIG_PAGE_POISONING, we can trigger a kernel BUG: :/# echo 1 > /sys/devices/system/memory/memory40/online :/# echo 1 > /sys/devices/system/memory/memory42/online :/# cat /proc/pagetypeinfo > test.file page:fffff2c585200000 is uninitialized and poisoned raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) There is not page extension available. ------------[ cut here ]------------ kernel BUG at include/linux/mm.h:1107! invalid opcode: 0000 [#1] SMP NOPTI Please note that this change does not affect ZONE_DEVICE, because pagetypeinfo_showmixedcount_print() is called from mm/vmstat.c:pagetypeinfo_showmixedcount() only for populated zones, and ZONE_DEVICE is never populated (zone->present_pages always 0). [david@redhat.com: move check to outer loop, add comment, rephrase description] Link: http://lkml.kernel.org/r/20191011140638.8160-1-david@redhat.com Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") # visible after d0dc12e86b319 Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Miles Chen <miles.chen@mediatek.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Qian Cai <cai@lca.pw> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> [4.13+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-14mm, page_owner: rename flag indicating that page is allocatedVlastimil Babka
Commit 37389167a281 ("mm, page_owner: keep owner info when freeing the page") has introduced a flag PAGE_EXT_OWNER_ACTIVE to indicate that page is tracked as being allocated. Kirril suggested naming it PAGE_EXT_OWNER_ALLOCATED to make it more clear, as "active is somewhat loaded term for a page". Link: http://lkml.kernel.org/r/20190930122916.14969-4-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Walter Wu <walter-zh.wu@mediatek.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-14mm, page_owner: decouple freeing stack trace from debug_pageallocVlastimil Babka
Commit 8974558f49a6 ("mm, page_owner, debug_pagealloc: save and dump freeing stack trace") enhanced page_owner to also store freeing stack trace, when debug_pagealloc is also enabled. KASAN would also like to do this [1] to improve error reports to debug e.g. UAF issues. Kirill has suggested that the freeing stack trace saving should be also possible to be enabled separately from KASAN or debug_pagealloc, i.e. with an extra boot option. Qian argued that we have enough options already, and avoiding the extra overhead is not worth the complications in the case of a debugging option. Kirill noted that the extra stack handle in struct page_owner requires 0.1% of memory. This patch therefore enables free stack saving whenever page_owner is enabled, regardless of whether debug_pagealloc or KASAN is also enabled. KASAN kernels booted with page_owner=on will thus benefit from the improved error reports. [1] https://bugzilla.kernel.org/show_bug.cgi?id=203967 [vbabka@suse.cz: v3] Link: http://lkml.kernel.org/r/20191007091808.7096-3-vbabka@suse.cz Link: http://lkml.kernel.org/r/20190930122916.14969-3-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Qian Cai <cai@lca.pw> Suggested-by: Dmitry Vyukov <dvyukov@google.com> Suggested-by: Walter Wu <walter-zh.wu@mediatek.com> Suggested-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Suggested-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-14mm, page_owner: fix off-by-one error in __set_page_owner_handle()Vlastimil Babka
Patch series "followups to debug_pagealloc improvements through page_owner", v3. These are followups to [1] which made it to Linus meanwhile. Patches 1 and 3 are based on Kirill's review, patch 2 on KASAN request [2]. It would be nice if all of this made it to 5.4 with [1] already there (or at least Patch 1). This patch (of 3): As noted by Kirill, commit 7e2f2a0cd17c ("mm, page_owner: record page owner for each subpage") has introduced an off-by-one error in __set_page_owner_handle() when looking up page_ext for subpages. As a result, the head page page_owner info is set twice, while for the last tail page, it's not set at all. Fix this and also make the code more efficient by advancing the page_ext pointer we already have, instead of calling lookup_page_ext() for each subpage. Since the full size of struct page_ext is not known at compile time, we can't use a simple page_ext++ statement, so introduce a page_ext_next() inline function for that. Link: http://lkml.kernel.org/r/20190930122916.14969-2-vbabka@suse.cz Fixes: 7e2f2a0cd17c ("mm, page_owner: record page owner for each subpage") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Kirill A. Shutemov <kirill@shutemov.name> Reported-by: Miles Chen <miles.chen@mediatek.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Walter Wu <walter-zh.wu@mediatek.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24mm, page_owner, debug_pagealloc: save and dump freeing stack traceVlastimil Babka
The debug_pagealloc functionality is useful to catch buggy page allocator users that cause e.g. use after free or double free. When page inconsistency is detected, debugging is often simpler by knowing the call stack of process that last allocated and freed the page. When page_owner is also enabled, we record the allocation stack trace, but not freeing. This patch therefore adds recording of freeing process stack trace to page owner info, if both page_owner and debug_pagealloc are configured and enabled. With only page_owner enabled, this info is not useful for the memory leak debugging use case. dump_page() is adjusted to print the info. An example result of calling __free_pages() twice may look like this (note the page last free stack trace): BUG: Bad page state in process bash pfn:13d8f8 page:ffffc31984f63e00 refcount:-1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x1affff800000000() raw: 01affff800000000 dead000000000100 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000000000 ffffffffffffffff 0000000000000000 page dumped because: nonzero _refcount page_owner tracks the page as freed page last allocated via order 0, migratetype Unmovable, gfp_mask 0xcc0(GFP_KERNEL) prep_new_page+0x143/0x150 get_page_from_freelist+0x289/0x380 __alloc_pages_nodemask+0x13c/0x2d0 khugepaged+0x6e/0xc10 kthread+0xf9/0x130 ret_from_fork+0x3a/0x50 page last free stack trace: free_pcp_prepare+0x134/0x1e0 free_unref_page+0x18/0x90 khugepaged+0x7b/0xc10 kthread+0xf9/0x130 ret_from_fork+0x3a/0x50 Modules linked in: CPU: 3 PID: 271 Comm: bash Not tainted 5.3.0-rc4-2.g07a1a73-default+ #57 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x85/0xc0 bad_page.cold+0xba/0xbf rmqueue_pcplist.isra.0+0x6c5/0x6d0 rmqueue+0x2d/0x810 get_page_from_freelist+0x191/0x380 __alloc_pages_nodemask+0x13c/0x2d0 __get_free_pages+0xd/0x30 __pud_alloc+0x2c/0x110 copy_page_range+0x4f9/0x630 dup_mmap+0x362/0x480 dup_mm+0x68/0x110 copy_process+0x19e1/0x1b40 _do_fork+0x73/0x310 __x64_sys_clone+0x75/0x80 do_syscall_64+0x6e/0x1e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f10af854a10 ... Link: http://lkml.kernel.org/r/20190820131828.22684-5-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24mm, page_owner: keep owner info when freeing the pageVlastimil Babka
For debugging purposes it might be useful to keep the owner info even after page has been freed, and include it in e.g. dump_page() when detecting a bad page state. For that, change the PAGE_EXT_OWNER flag meaning to "page owner info has been set at least once" and add new PAGE_EXT_OWNER_ACTIVE for tracking whether page is supposed to be currently tracked allocated or free. Adjust dump_page() accordingly, distinguishing free and allocated pages. In the page_owner debugfs file, keep printing only allocated pages so that existing scripts are not confused, and also because free pages are irrelevant for the memory statistics or leak detection that's the typical use case of the file, anyway. Link: http://lkml.kernel.org/r/20190820131828.22684-4-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24mm, page_owner: record page owner for each subpageVlastimil Babka
Patch series "debug_pagealloc improvements through page_owner", v2. The debug_pagealloc functionality serves a similar purpose on the page allocator level that slub_debug does on the kmalloc level, which is to detect bad users. One notable feature that slub_debug has is storing stack traces of who last allocated and freed the object. On page level we track allocations via page_owner, but that info is discarded when freeing, and we don't track freeing at all. This series improves those aspects. With both debug_pagealloc and page_owner enabled, we can then get bug reports such as the example in Patch 4. SLUB debug tracking additionally stores cpu, pid and timestamp. This could be added later, if deemed useful enough to justify the additional page_ext structure size. This patch (of 3): Currently, page owner info is only recorded for the first page of a high-order allocation, and copied to tail pages in the event of a split page. With the plan to keep previous owner info after freeing the page, it would be benefical to record page owner for each subpage upon allocation. This increases the overhead for high orders, but that should be acceptable for a debugging option. The order stored for each subpage is the order of the whole allocation. This makes it possible to calculate the "head" pfn and to recognize "tail" pages (quoted because not all high-order allocations are compound pages with true head and tail pages). When reading the page_owner debugfs file, keep skipping the "tail" pages so that stats gathered by existing scripts don't get inflated. Link: http://lkml.kernel.org/r/20190820131828.22684-3-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-29mm/page_owner: Simplify stack trace handlingThomas Gleixner
Replace the indirection through struct stack_trace by using the storage array based interfaces. The original code in all printing functions is really wrong. It allocates a storage array on stack which is unused because depot_fetch_stack() does not store anything in it. It overwrites the entries pointer in the stack_trace struct so it points to the depot storage. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: linux-mm@kvack.org Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094802.067210525@linutronix.de
2019-04-14mm/page_owner: Remove the ULONG_MAX stack trace hackeryThomas Gleixner
No architecture terminates the stack trace with ULONG_MAX anymore. Remove the cruft. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Alexander Potapenko <glider@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: linux-mm@kvack.org Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/20190410103644.661974663@linutronix.de
2019-03-05mm: no need to check return value of debugfs_create functionsGreg Kroah-Hartman
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Link: http://lkml.kernel.org/r/20190122152151.16139-14-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Laura Abbott <labbott@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28mm/page_owner: clamp read count to PAGE_SIZEMiles Chen
The (root-only) page owner read might allocate a large size of memory with a large read count. Allocation fails can easily occur when doing high order allocations. Clamp buffer size to PAGE_SIZE to avoid arbitrary size allocation and avoid allocation fails due to high order allocation. [akpm@linux-foundation.org: use min_t()] Link: http://lkml.kernel.org/r/1541091607-27402-1-git-send-email-miles.chen@mediatek.com Signed-off-by: Miles Chen <miles.chen@mediatek.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joe Perches <joe@perches.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-15mm: use octal not symbolic permissionsJoe Perches
mm/*.c files use symbolic and octal styles for permissions. Using octal and not symbolic permissions is preferred by many as more readable. https://lkml.org/lkml/2016/8/2/1945 Prefer the direct use of octal for permissions. Done using $ scripts/checkpatch.pl -f --types=SYMBOLIC_PERMS --fix-inplace mm/*.c and some typing. Before: $ git grep -P -w "0[0-7]{3,3}" mm | wc -l 44 After: $ git grep -P -w "0[0-7]{3,3}" mm | wc -l 86 Miscellanea: o Whitespace neatening around these conversions. Link: http://lkml.kernel.org/r/2e032ef111eebcd4c5952bae86763b541d373469.1522102887.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-05mm/page_owner.c: make early_page_owner_param() __initDou Liyang
The early_param() is only called during kernel initialization, So Linux marks the functions of it with __init macro to save memory. But it forgot to mark the early_page_owner_param(). So, Make it __init as well. Link: http://lkml.kernel.org/r/20180117034736.26963-1-douly.fnst@cn.fujitsu.com Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-28mm/page_owner: fix recursion bug after changing skip entriesManinder Singh
This patch fixes commit 5f48f0bd4e36 ("mm, page_owner: skip unnecessary stack_trace entries"). Because if we skip first two entries then logic of checking count value as 2 for recursion is broken and code will go in one depth recursion. so we need to check only one call of _RET_IP(__set_page_owner) while checking for recursion. Current Backtrace while checking for recursion:- (save_stack) from (__set_page_owner) // (But recursion returns true here) (__set_page_owner) from (get_page_from_freelist) (get_page_from_freelist) from (__alloc_pages_nodemask) (__alloc_pages_nodemask) from (depot_save_stack) (depot_save_stack) from (save_stack) // recursion should return true here (save_stack) from (__set_page_owner) (__set_page_owner) from (get_page_from_freelist) (get_page_from_freelist) from (__alloc_pages_nodemask+) (__alloc_pages_nodemask) from (depot_save_stack) (depot_save_stack) from (save_stack) (save_stack) from (__set_page_owner) (__set_page_owner) from (get_page_from_freelist) Correct Backtrace with fix: (save_stack) from (__set_page_owner) // recursion returned true here (__set_page_owner) from (get_page_from_freelist) (get_page_from_freelist) from (__alloc_pages_nodemask+) (__alloc_pages_nodemask) from (depot_save_stack) (depot_save_stack) from (save_stack) (save_stack) from (__set_page_owner) (__set_page_owner) from (get_page_from_freelist) Link: http://lkml.kernel.org/r/1521607043-34670-1-git-send-email-maninder1.s@samsung.com Fixes: 5f48f0bd4e36 ("mm, page_owner: skip unnecessary stack_trace entries") Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Signed-off-by: Vaneet Narang <v.narang@samsung.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@techadventures.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ayush Mittal <ayush.m@samsung.com> Cc: Prakash Gupta <guptap@codeaurora.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: Vasyl Gomonovych <gomonovych@gmail.com> Cc: Amit Sahrawat <a.sahrawat@samsung.com> Cc: <pankaj.m@samsung.com> Cc: Vaneet Narang <v.narang@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-31mm/page_owner.c: clean up init_pages_in_zone()Oscar Salvador
Remove two redundant assignments in init_pages_in_zone(). [osalvador@techadventures.net: v3] Link: http://lkml.kernel.org/r/20180117124513.GA876@techadventures.net [akpm@linux-foundation.org: coding style tweaks] Link: http://lkml.kernel.org/r/20180110084355.GA22822@techadventures.net Signed-off-by: Oscar Salvador <osalvador@techadventures.net> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>