summaryrefslogtreecommitdiff
path: root/net/mac802154
AgeCommit message (Collapse)Author
2022-10-24mac802154: Fix LQI recordingMiquel Raynal
Back in 2014, the LQI was saved in the skb control buffer (skb->cb, or mac_cb(skb)) without any actual reset of this area prior to its use. As part of a useful rework of the use of this region, 32edc40ae65c ("ieee802154: change _cb handling slightly") introduced mac_cb_init() to basically memset the cb field to 0. In particular, this new function got called at the beginning of mac802154_parse_frame_start(), right before the location where the buffer got actually filled. What went through unnoticed however, is the fact that the very first helper called by device drivers in the receive path already used this area to save the LQI value for later extraction. Resetting the cb field "so late" led to systematically zeroing the LQI. If we consider the reset of the cb field needed, we can make it as soon as we get an skb from a device driver, right before storing the LQI, as is the very first time we need to write something there. Cc: stable@vger.kernel.org Fixes: 32edc40ae65c ("ieee802154: change _cb handling slightly") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20221020142535.1038885-1-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2022-08-29net: mac802154: Fix a condition in the receive pathMiquel Raynal
Upon reception, a packet must be categorized, either it's destination is the host, or it is another host. A packet with no destination addressing fields may be valid in two situations: - the packet has no source field: only ACKs are built like that, we consider the host as the destination. - the packet has a valid source field: it is directed to the PAN coordinator, as for know we don't have this information we consider we are not the PAN coordinator. There was likely a copy/paste error made during a previous cleanup because the if clause is now containing exactly the same condition as in the switch case, which can never be true. In the past the destination address was used in the switch and the source address was used in the if, which matches what the spec says. Cc: stable@vger.kernel.org Fixes: ae531b9475f6 ("ieee802154: use ieee802154_addr instead of *_sa variants") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220826142954.254853-1-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2022-04-30net: mac802154: Fix symbol durationsMiquel Raynal
There are two major issues in the logic calculating the symbol durations based on the page/channel: - The page number is used in place of the channel value. - The BIT() macro is missing because we want to check the channel value against a bitmask. Fix these two errors and apologize loudly for this mistake. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20220428164140.251965-1-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2022-04-25net: mac802154: Create an error helper for asynchronous offloading errorsMiquel Raynal
A few drivers do the full transmit operation asynchronously, which means that a bus error that happens when forwarding the packet to the transmitter or a timeout happening when offloading the request to the transmitter will not be reported immediately. The solution in this case is to call this new helper to free the necessary resources, restart the queue and always return the same generic TRAC error code: IEEE802154_SYSTEM_ERROR. Suggested-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20220407100903.1695973-6-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2022-04-25net: mac802154: Create an offloaded transmission error helperMiquel Raynal
So far there is only a helper for successful transmissions, which led device drivers to implement their own handling in case of error. Unfortunately, we really need all the drivers to give the hand back to the core once they are done in order to be able to build a proper synchronous API. So let's create a _xmit_error() helper and take this opportunity to fill the new device-global field storing Tx statuses. Suggested-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20220407100903.1695973-5-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2022-04-25net: mac802154: Save a global error code on transmissionsMiquel Raynal
So far no error is returned from a failing transmission. However it might sometimes be useful, and particularly easy to use during sync transfers (for certain MLME commands). Let's create an internal variable for that, global to the device. Right now only success are registered, which is rather useless, but soon we will have more situations filling this field. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20220407100903.1695973-4-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2022-02-10net: mac802154: Set durations automaticallyMiquel Raynal
As depicted in the IEEE 802.15.4 specification, modulation/bands are tight to a number of page/channels so we can for most of them derive the durations automatically. The two locations that must call this new helper to set the variou symbol durations are: - when manually requesting a channel change though the netlink interface - at PHY creation, once the device driver has set the default page/channel If an information is missing, the symbol duration is not touched, a debug message is eventually printed. This keeps the compatibility with the unconverted drivers for which it was too complicated for me to find their precise information. If they initially provided a symbol duration, it would be kept. If they don't, the symbol duration value is left untouched. Once the symbol duration derived, the lifs and sifs durations are updated as well. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20220201180629.93410-4-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2022-02-10net: mac802154: Convert the symbol duration into nanosecondsMiquel Raynal
Tdsym is often given in the spec as pretty small numbers in microseconds and hence was reflected in the code as symbol_duration and was stored as a u8. Actually, for UWB PHYs, the symbol duration is given in nanoseconds and are as precise as picoseconds. In order to handle better these PHYs, change the type of symbol_duration to u32 and store this value in nanoseconds. All the users of this variable are updated in a mechanical way. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20220201180629.93410-3-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2021-10-20mac802154: use dev_addr_set() - manualJakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20mac802154: use dev_addr_set()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-07ieee802154: Remove redundant initialization of variable retColin Ian King
The variable ret is being initialized with a value that is never read, it is being updated later on. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-06net: mac802154: Fix general protection faultPavel Skripkin
syzbot found general protection fault in crypto_destroy_tfm()[1]. It was caused by wrong clean up loop in llsec_key_alloc(). If one of the tfm array members is in IS_ERR() range it will cause general protection fault in clean up function [1]. Call Trace: crypto_free_aead include/crypto/aead.h:191 [inline] [1] llsec_key_alloc net/mac802154/llsec.c:156 [inline] mac802154_llsec_key_add+0x9e0/0xcc0 net/mac802154/llsec.c:249 ieee802154_add_llsec_key+0x56/0x80 net/mac802154/cfg.c:338 rdev_add_llsec_key net/ieee802154/rdev-ops.h:260 [inline] nl802154_add_llsec_key+0x3d3/0x560 net/ieee802154/nl802154.c:1584 genl_family_rcv_msg_doit+0x228/0x320 net/netlink/genetlink.c:739 genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] genl_rcv_msg+0x328/0x580 net/netlink/genetlink.c:800 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502 genl_rcv+0x24/0x40 net/netlink/genetlink.c:811 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:674 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reported-by: syzbot+9ec037722d2603a9f52e@syzkaller.appspotmail.com Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20210304152125.1052825-1-paskripkin@gmail.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2020-11-07net: mac802154: convert tasklets to use new tasklet_setup() APIAllen Pais
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <apais@linux.microsoft.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-08Merge tag 'ieee802154-for-davem-2020-09-08' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== pull-request: ieee802154 for net 2020-09-08 An update from ieee802154 for your *net* tree. A potential memory leak fix for ca8210 from Liu Jian, a check on the return for a register read in adf7242 and finally a user after free fix in the softmac tx function from Eric found by syzkaller. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08mac802154: tx: fix use-after-freeEric Dumazet
syzbot reported a bug in ieee802154_tx() [1] A similar issue in ieee802154_xmit_worker() is also fixed in this patch. [1] BUG: KASAN: use-after-free in ieee802154_tx+0x3d2/0x480 net/mac802154/tx.c:88 Read of size 4 at addr ffff8880251a8c70 by task syz-executor.3/928 CPU: 0 PID: 928 Comm: syz-executor.3 Not tainted 5.9.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 ieee802154_tx+0x3d2/0x480 net/mac802154/tx.c:88 ieee802154_subif_start_xmit+0xbe/0xe4 net/mac802154/tx.c:130 __netdev_start_xmit include/linux/netdevice.h:4634 [inline] netdev_start_xmit include/linux/netdevice.h:4648 [inline] dev_direct_xmit+0x4e9/0x6e0 net/core/dev.c:4203 packet_snd net/packet/af_packet.c:2989 [inline] packet_sendmsg+0x2413/0x5290 net/packet/af_packet.c:3014 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:671 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2353 ___sys_sendmsg+0xf3/0x170 net/socket.c:2407 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2440 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45d5b9 Code: 5d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fc98e749c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000000000002ccc0 RCX: 000000000045d5b9 RDX: 0000000000000000 RSI: 0000000020007780 RDI: 000000000000000b RBP: 000000000118d020 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000118cfec R13: 00007fff690c720f R14: 00007fc98e74a9c0 R15: 000000000118cfec Allocated by task 928: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:461 slab_post_alloc_hook mm/slab.h:518 [inline] slab_alloc_node mm/slab.c:3254 [inline] kmem_cache_alloc_node+0x136/0x3e0 mm/slab.c:3574 __alloc_skb+0x71/0x550 net/core/skbuff.c:198 alloc_skb include/linux/skbuff.h:1094 [inline] alloc_skb_with_frags+0x92/0x570 net/core/skbuff.c:5771 sock_alloc_send_pskb+0x72a/0x880 net/core/sock.c:2348 packet_alloc_skb net/packet/af_packet.c:2837 [inline] packet_snd net/packet/af_packet.c:2932 [inline] packet_sendmsg+0x19fb/0x5290 net/packet/af_packet.c:3014 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:671 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2353 ___sys_sendmsg+0xf3/0x170 net/socket.c:2407 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2440 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 928: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track+0x1c/0x30 mm/kasan/common.c:56 kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0xd8/0x120 mm/kasan/common.c:422 __cache_free mm/slab.c:3418 [inline] kmem_cache_free.part.0+0x74/0x1e0 mm/slab.c:3693 kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:622 __kfree_skb net/core/skbuff.c:679 [inline] consume_skb net/core/skbuff.c:838 [inline] consume_skb+0xcf/0x160 net/core/skbuff.c:832 __dev_kfree_skb_any+0x9c/0xc0 net/core/dev.c:3107 fakelb_hw_xmit+0x20e/0x2a0 drivers/net/ieee802154/fakelb.c:81 drv_xmit_async net/mac802154/driver-ops.h:16 [inline] ieee802154_tx+0x282/0x480 net/mac802154/tx.c:81 ieee802154_subif_start_xmit+0xbe/0xe4 net/mac802154/tx.c:130 __netdev_start_xmit include/linux/netdevice.h:4634 [inline] netdev_start_xmit include/linux/netdevice.h:4648 [inline] dev_direct_xmit+0x4e9/0x6e0 net/core/dev.c:4203 packet_snd net/packet/af_packet.c:2989 [inline] packet_sendmsg+0x2413/0x5290 net/packet/af_packet.c:3014 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:671 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2353 ___sys_sendmsg+0xf3/0x170 net/socket.c:2407 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2440 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff8880251a8c00 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 112 bytes inside of 224-byte region [ffff8880251a8c00, ffff8880251a8ce0) The buggy address belongs to the page: page:0000000062b6a4f1 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x251a8 flags: 0xfffe0000000200(slab) raw: 00fffe0000000200 ffffea0000435c88 ffffea00028b6c08 ffff8880a9055d00 raw: 0000000000000000 ffff8880251a80c0 000000010000000c 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880251a8b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880251a8b80: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc >ffff8880251a8c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880251a8c80: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff8880251a8d00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb Fixes: 409c3b0c5f03 ("mac802154: tx: move stats tx increment") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Alexander Aring <alex.aring@gmail.com> Cc: Stefan Schmidt <stefan@datenfreihafen.org> Cc: linux-wpan@vger.kernel.org Link: https://lore.kernel.org/r/20200908104025.4009085-1-edumazet@google.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2020-08-07mm, treewide: rename kzfree() to kfree_sensitive()Waiman Long
As said by Linus: A symmetric naming is only helpful if it implies symmetries in use. Otherwise it's actively misleading. In "kzalloc()", the z is meaningful and an important part of what the caller wants. In "kzfree()", the z is actively detrimental, because maybe in the future we really _might_ want to use that "memfill(0xdeadbeef)" or something. The "zero" part of the interface isn't even _relevant_. The main reason that kzfree() exists is to clear sensitive information that should not be leaked to other future users of the same memory objects. Rename kzfree() to kfree_sensitive() to follow the example of the recently added kvfree_sensitive() and make the intention of the API more explicit. In addition, memzero_explicit() is used to clear the memory to make sure that it won't get optimized away by the compiler. The renaming is done by using the command sequence: git grep -w --name-only kzfree |\ xargs sed -i 's/kzfree/kfree_sensitive/' followed by some editing of the kfree_sensitive() kerneldoc and adding a kzfree backward compatibility macro in slab.h. [akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h] [akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more] Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Joe Perches <joe@perches.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28mac802154: Remove VLA usage of skcipherKees Cook
In the quest to remove all stack VLA usage from the kernel[1], this replaces struct crypto_skcipher and SKCIPHER_REQUEST_ON_STACK() usage with struct crypto_sync_skcipher and SYNC_SKCIPHER_REQUEST_ON_STACK(), which uses a fixed stack size. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Cc: Alexander Aring <alex.aring@gmail.com> Cc: Stefan Schmidt <stefan@datenfreihafen.org> Cc: linux-wpan@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-08-06net: mac802154: tx: expand tailroom if necessaryAlexander Aring
This patch is necessary if case of AF_PACKET or other socket interface which I am aware of it and didn't allocated the necessary room. Reported-by: David Palma <david.palma@ntnu.no> Reported-by: Rabi Narayan Sahoo <rabinarayans0828@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Alexander Aring <aring@mojatatu.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2018-03-28net/mac802154: disambiguate mac80215 vs mac802154 trace eventsAlexei Starovoitov
two trace events defined with the same name and both unused. They conflict in allyesconfig build. Rename one of them. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20mac802154: Fix MAC header and payload encryptedDiogenes Pereira
According to 802.15.4-2003/2006/2015 specifications the MAC frame is composed of MHR, MAC payload and MFR and just the outgoing MAC payload must be encrypted. If communication is secure,sender build Auxiliary Security Header(ASH), insert it next to the standard MHR header with security enabled bit ON, and secure frames before transmitting them. According to the information carried within the ASH, recipient retrieves the right cryptographic key and correctly un-secure MAC frames. The error scenario occurs on Linux using IEEE802154_SCF_SECLEVEL_ENC(4) security level when llsec_do_encrypt_unauth() function builds theses MAC frames incorrectly. On recipients these MAC frames are discarded,logging "got invalid frame" messages. Signed-off-by: Diogenes Pereira <dvnp@cesar.org.br> Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com>
2017-09-20mac802154: replace hardcoded value with macroDiogenes Pereira
Use IEEE802154_SCF_SECLEVEL_NONE macro defined at ieee802154.h file. Signed-off-by: Diogenes Pereira <dvnp@cesar.org.br> Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com>
2017-06-07net: Fix inconsistent teardown and release of private netdev state.David S. Miller
Network devices can allocate reasources and private memory using netdev_ops->ndo_init(). However, the release of these resources can occur in one of two different places. Either netdev_ops->ndo_uninit() or netdev->destructor(). The decision of which operation frees the resources depends upon whether it is necessary for all netdev refs to be released before it is safe to perform the freeing. netdev_ops->ndo_uninit() presumably can occur right after the NETDEV_UNREGISTER notifier completes and the unicast and multicast address lists are flushed. netdev->destructor(), on the other hand, does not run until the netdev references all go away. Further complicating the situation is that netdev->destructor() almost universally does also a free_netdev(). This creates a problem for the logic in register_netdevice(). Because all callers of register_netdevice() manage the freeing of the netdev, and invoke free_netdev(dev) if register_netdevice() fails. If netdev_ops->ndo_init() succeeds, but something else fails inside of register_netdevice(), it does call ndo_ops->ndo_uninit(). But it is not able to invoke netdev->destructor(). This is because netdev->destructor() will do a free_netdev() and then the caller of register_netdevice() will do the same. However, this means that the resources that would normally be released by netdev->destructor() will not be. Over the years drivers have added local hacks to deal with this, by invoking their destructor parts by hand when register_netdevice() fails. Many drivers do not try to deal with this, and instead we have leaks. Let's close this hole by formalizing the distinction between what private things need to be freed up by netdev->destructor() and whether the driver needs unregister_netdevice() to perform the free_netdev(). netdev->priv_destructor() performs all actions to free up the private resources that used to be freed by netdev->destructor(), except for free_netdev(). netdev->needs_free_netdev is a boolean that indicates whether free_netdev() should be done at the end of unregister_netdevice(). Now, register_netdevice() can sanely release all resources after ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit() and netdev->priv_destructor(). And at the end of unregister_netdevice(), we invoke netdev->priv_destructor() and optionally call free_netdev(). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-30drivers: add explicit interrupt.h includesFlorian Westphal
These files all use functions declared in interrupt.h, but currently rely on implicit inclusion of this file (via netns/xfrm.h). That won't work anymore when the flow cache is removed so include that header where needed. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-02sched/headers: Prepare to use <linux/rcuupdate.h> instead of ↵Ingo Molnar
<linux/rculist.h> in <linux/sched.h> We don't actually need the full rculist.h header in sched.h anymore, we will be able to include the smaller rcupdate.h header instead. But first update code that relied on the implicit header inclusion. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-25ktime: Cleanup ktime_set() usageThomas Gleixner
ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-16Makefile: drop -D__CHECK_ENDIAN__ from cflagsMichael S. Tsirkin
That's the default now, no need for makefiles to set it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
2016-09-19mac802154: use rate limited warnings for malformed framesAristeu Rozanski
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Acked-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19mac802154: don't warn on unsupported framesAristeu Rozanski
Just because we don't support certain types of frames yet doesn't mean we have to flood the message log with warnings about "invalid" frames. Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Acked-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19mac802154: set phy net namespace for new ifacesAlexander Aring
This patch sets the net namespace when creating SoftMAC interfaces. This is important if the namespace at phy layer was switched before. Currently we losing interfaces in some namespace and it's not possible to recover that. Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Support more Realtek wireless chips, from Jes Sorenson. 2) New BPF types for per-cpu hash and arrap maps, from Alexei Starovoitov. 3) Make several TCP sysctls per-namespace, from Nikolay Borisov. 4) Allow the use of SO_REUSEPORT in order to do per-thread processing of incoming TCP/UDP connections. The muxing can be done using a BPF program which hashes the incoming packet. From Craig Gallek. 5) Add a multiplexer for TCP streams, to provide a messaged based interface. BPF programs can be used to determine the message boundaries. From Tom Herbert. 6) Add 802.1AE MACSEC support, from Sabrina Dubroca. 7) Avoid factorial complexity when taking down an inetdev interface with lots of configured addresses. We were doing things like traversing the entire address less for each address removed, and flushing the entire netfilter conntrack table for every address as well. 8) Add and use SKB bulk free infrastructure, from Jesper Brouer. 9) Allow offloading u32 classifiers to hardware, and implement for ixgbe, from John Fastabend. 10) Allow configuring IRQ coalescing parameters on a per-queue basis, from Kan Liang. 11) Extend ethtool so that larger link mode masks can be supported. From David Decotigny. 12) Introduce devlink, which can be used to configure port link types (ethernet vs Infiniband, etc.), port splitting, and switch device level attributes as a whole. From Jiri Pirko. 13) Hardware offload support for flower classifiers, from Amir Vadai. 14) Add "Local Checksum Offload". Basically, for a tunneled packet the checksum of the outer header is 'constant' (because with the checksum field filled into the inner protocol header, the payload of the outer frame checksums to 'zero'), and we can take advantage of that in various ways. From Edward Cree" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits) bonding: fix bond_get_stats() net: bcmgenet: fix dma api length mismatch net/mlx4_core: Fix backward compatibility on VFs phy: mdio-thunder: Fix some Kconfig typos lan78xx: add ndo_get_stats64 lan78xx: handle statistics counter rollover RDS: TCP: Remove unused constant RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket net: smc911x: convert pxa dma to dmaengine team: remove duplicate set of flag IFF_MULTICAST bonding: remove duplicate set of flag IFF_MULTICAST net: fix a comment typo ethernet: micrel: fix some error codes ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it bpf, dst: add and use dst_tclassid helper bpf: make skb->tc_classid also readable net: mvneta: bm: clarify dependencies cls_bpf: reset class and reuse major in da ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c ldmvsw: Add ldmvsw.c driver code ...
2016-02-23mac802154: Fixes kernel oops when unloading a radio driverKoen Zandberg
Destroying the workqueue before unregistering the net device caused a kernel oops Signed-off-by: Koen Zandberg <koen@bergzand.net> Acked-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-27mac802154: Use skcipherHerbert Xu
This patch replaces uses of blkcipher with skcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
2016-01-04mac802154: constify ieee802154_llsec_ops structureJulia Lawall
The ieee802154_llsec_ops structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10mac802154: tx: fix synced xmit deadlockAlexander Aring
This patch reverts 6001d52 ("mac802154: tx: don't allow if down while sync tx"). This has side effects with stop callback which flush the transmit workqueue. The stop callback will wait until the workqueue is flushed and holding the rtnl lock. That means it can happen that the stop callback waits forever because it try to lock the rtnl mutex which is already hold by stop callback. Cc: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19mac802154: Delete an unnecessary check before the function call "kfree_skb"Markus Elfring
The kfree_skb() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-21mac802154: llsec: use kzfreeAlexander Aring
This patch will use kzfree instead kfree for security related information which can be offered by acccident. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-30ieee802154: change mtu size behaviourAlexander Aring
This patch changes the mtu size of 802.15.4 interfaces. The current setting is the meaning of the maximum transport unit with mac header, which is 127 bytes according 802.15.4. The linux meaning of the mtu size field is the maximum payload of a mac frame. Like in ethernet, which is 1500 bytes. We have dynamic length of mac frames in 802.15.4, this is why we assume the minimum header length which is hard_header_len. This contains fc and sequence fields. These can evaluated by driver layer without additional checks. We currently don't support to set the FCS from userspace, so we need to subtract this from mtu size as well. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-30mac802154: add comments for llsec issuesAlexander Aring
While doing a little test with the llsec implementation I saw these issues. We should move decryption and encruption somewhere else, otherwise while capturing with wireshark the mac header shows secuirty fields but the payload is plaintext. A complete other issue is what doing with HardMAC drivers where the payload is always plaintext. I think we need a special handling then in userspace. We currently doesn't support any HardMAC transceivers, so we should fix the first issue for SoftMAC transceivers. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-30nl802154: add support for security layerAlexander Aring
This patch adds support for accessing mac802154 llsec implementation over nl802154. I added for a new Kconfig entry to provide this functionality CONFIG_IEEE802154_NL802154_EXPERIMENTAL. This interface is still in development. It provides to change security parameters and add/del/dump entries of security tables. Later we can add also a get to get an entry by unique identifier. Cc: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-24mac802154: iface: assume big endian for af_packetAlexander Aring
The callback "create" and "parse" from header_ops are called from netdev core upper-layer functionality, like af_packet. These callbacks assumes big endian for addresses and we should not introduce a special byteordering handling for ieee802154 over af_packet in userspace. We have an identical issue with setting the mac address which also assumes big endian byteordering. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mac802154: tx: add warning if MTU exceedsAlexander Aring
Sending over AF_PACKET RAW sockets we can sending frames which exceeds MTU size. To handling it correct we need to change things in AF_PACKET which knows on RAW sockets an additional FCS is set by hardware or mac802154 transmit functionality. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22ieee802154: change needed headroom/tailroomAlexander Aring
This patch cleanups needed_headroom, needed_tailroom and hard_header_len fields for wpan and lowpan interfaces. For wpan interfaces the worst case mac header len should be part of needed_headroom, currently this is set as hard_header_len, but hard_header_len should be set to the minimum header length which xmit call assumes and this is the minimum frame length of 802.15.4. The hard_header_len value will check inside send callbacl of AF_PACKET raw sockets. For lowpan interfaces, if fragmentation isn't needed the skb will call dev_hard_header for 802154 layer and queue it afterwards. This happens without new skb allocation, so we need the same headroom and tailroom lengths like 802154 inside 802154 6lowpan layer. At least we assume as minimum header length an ipv6 header size. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22ieee802154: introduce wpan_dev_header_opsAlexander Aring
The current header_ops callback structure of net device are used mostly from 802.15.4 upper-layers. Because this callback structure is a very generic one, which is also used by e.g. DGRAM AF_PACKET sockets, we can't make this callback structure 802.15.4 specific which is currently is. I saw the smallest "constraint" for calling this callback with dev_hard_header/dev_parse_header by AF_PACKET which assign a 8 byte array for address void pointers. Currently 802.15.4 specific protocols like af802154 and 6LoWPAN will assign the "struct ieee802154_addr" as these parameters which is greater than 8 bytes. The current callback implementation for header_ops.create assumes always a complete "struct ieee802154_addr" which AF_PACKET can't never handled and is greater than 8 bytes. For that reason we introduce now a "generic" create/parse header_ops callback which allows handling with intra-pan extended addresses only. This allows a small use-case with AF_PACKET to send "somehow" a valid dataframe over DGRAM. To keeping the current dev_hard_header behaviour we introduce a similar callback structure "wpan_dev_header_ops" which contains 802.15.4 specific upper-layer header creation functionality, which can be called by wpan_dev_hard_header. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mac802154: llsec: fix device deletion from listAlexander Aring
This patch adds a missing list_del when a device description will be deleted. Cc: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-10ieee802154: add ack request default handlingAlexander Aring
This patch introduce a new mib entry which isn't part of 802.15.4 but useful as default behaviour to set the ack request bit or not if we don't know if the ack request bit should set. This is currently used for stacks like IEEE 802.15.4 6LoWPAN. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>