summaryrefslogtreecommitdiff
path: root/net/switchdev
AgeCommit message (Collapse)Author
2021-10-27net: switchdev: merge switchdev_handle_fdb_{add,del}_to_deviceVladimir Oltean
To reduce code churn, the same patch makes multiple changes, since they all touch the same lines: 1. The implementations for these two are identical, just with different function pointers. Reduce duplications and name the function pointers "mod_cb" instead of "add_cb" and "del_cb". Pass the event as argument. 2. Drop the "const" attribute from "orig_dev". If the driver needs to check whether orig_dev belongs to itself and then call_switchdev_notifiers(orig_dev, SWITCHDEV_FDB_OFFLOADED), it can't, because call_switchdev_notifiers takes a non-const struct net_device *. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04net: make switchdev_bridge_port_{,unoffload} loosely coupled with the bridgeVladimir Oltean
With the introduction of explicit offloading API in switchdev in commit 2f5dc00f7a3e ("net: bridge: switchdev: let drivers inform which bridge ports are offloaded"), we started having Ethernet switch drivers calling directly into a function exported by net/bridge/br_switchdev.c, which is a function exported by the bridge driver. This means that drivers that did not have an explicit dependency on the bridge before, like cpsw and am65-cpsw, now do - otherwise it is not possible to call a symbol exported by a driver that can be built as module unless you are a module too. There was an attempt to solve the dependency issue in the form of commit b0e81817629a ("net: build all switchdev drivers as modules when the bridge is a module"). Grygorii Strashko, however, says about it: | In my opinion, the problem is a bit bigger here than just fixing the | build :( | | In case, of ^cpsw the switchdev mode is kinda optional and in many | cases (especially for testing purposes, NFS) the multi-mac mode is | still preferable mode. | | There were no such tight dependency between switchdev drivers and | bridge core before and switchdev serviced as independent, notification | based layer between them, so ^cpsw still can be "Y" and bridge can be | "M". Now for mostly every kernel build configuration the CONFIG_BRIDGE | will need to be set as "Y", or we will have to update drivers to | support build with BRIDGE=n and maintain separate builds for | networking vs non-networking testing. But is this enough? Wouldn't | it cause 'chain reaction' required to add more and more "Y" options | (like CONFIG_VLAN_8021Q)? | | PS. Just to be sure we on the same page - ARM builds will be forced | (with this patch) to have CONFIG_TI_CPSW_SWITCHDEV=m and so all our | automation testing will just fail with omap2plus_defconfig. In the light of this, it would be desirable for some configurations to avoid dependencies between switchdev drivers and the bridge, and have the switchdev mode as completely optional within the driver. Arnd Bergmann also tried to write a patch which better expressed the build time dependency for Ethernet switch drivers where the switchdev support is optional, like cpsw/am65-cpsw, and this made the drivers follow the bridge (compile as module if the bridge is a module) only if the optional switchdev support in the driver was enabled in the first place: https://patchwork.kernel.org/project/netdevbpf/patch/20210802144813.1152762-1-arnd@kernel.org/ but this still did not solve the fact that cpsw and am65-cpsw now must be built as modules when the bridge is a module - it just expressed correctly that optional dependency. But the new behavior is an apparent regression from Grygorii's perspective. So to support the use case where the Ethernet driver is built-in, NET_SWITCHDEV (a bool option) is enabled, and the bridge is a module, we need a framework that can handle the possible absence of the bridge from the running system, i.e. runtime bloatware as opposed to build-time bloatware. Luckily we already have this framework, since switchdev has been using it extensively. Events from the bridge side are transmitted to the driver side using notifier chains - this was originally done so that unrelated drivers could snoop for events emitted by the bridge towards ports that are implemented by other drivers (think of a switch driver with LAG offload that listens for switchdev events on a bonding/team interface that it offloads). There are also events which are transmitted from the driver side to the bridge side, which again are modeled using notifiers. SWITCHDEV_FDB_ADD_TO_BRIDGE is an example of this, and deals with notifying the bridge that a MAC address has been dynamically learned. So there is a precedent we can use for modeling the new framework. The difference compared to SWITCHDEV_FDB_ADD_TO_BRIDGE is that the work that the bridge needs to do when a port becomes offloaded is blocking in its nature: replay VLANs, MDBs etc. The calling context is indeed blocking (we are under rtnl_mutex), but the existing switchdev notification chain that the bridge is subscribed to is only the atomic one. So we need to subscribe the bridge to the blocking switchdev notification chain too. This patch: - keeps the driver-side perception of the switchdev_bridge_port_{,un}offload unchanged - moves the implementation of switchdev_bridge_port_{,un}offload from the bridge module into the switchdev module. - makes everybody that is subscribed to the switchdev blocking notifier chain "hear" offload & unoffload events - makes the bridge driver subscribe and handle those events - moves the bridge driver's handling of those events into 2 new functions called br_switchdev_port_{,un}offload. These functions contain in fact the core of the logic that was previously in switchdev_bridge_port_{,un}offload, just that now we go through an extra indirection layer to reach them. Unlike all the other switchdev notification structures, the structure used to carry the bridge port information, struct switchdev_notifier_brport_info, does not contain a "bool handled". This is because in the current usage pattern, we always know that a switchdev bridge port offloading event will be handled by the bridge, because the switchdev_bridge_port_offload() call was initiated by a NETDEV_CHANGEUPPER event in the first place, where info->upper_dev is a bridge. So if the bridge wasn't loaded, then the CHANGEUPPER event couldn't have happened. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-22net: switchdev: fix FDB entries towards foreign ports not getting propagated ↵Vladimir Oltean
to us The newly introduced switchdev_handle_fdb_{add,del}_to_device helpers solved a problem but introduced another one. They have a severe design bug: they do not propagate FDB events on foreign interfaces to us, i.e. this use case: br0 / \ / \ / \ / \ swp0 eno0 (switchdev) (foreign) when an address is learned on eno0, what is supposed to happen is that this event should also be propagated towards swp0. Somehow I managed to convince myself that this did work correctly, but obviously it does not. The trouble with foreign interfaces is that we must reach a switchdev net_device pointer through a foreign net_device that has no direct upper/lower relationship with it. So we need to do exploratory searching through the lower interfaces of the foreign net_device's bridge upper (to reach swp0 from eno0, we must check its upper, br0, for lower interfaces that pass the check_cb and foreign_dev_check_cb). This is something that the previous code did not do, it just assumed that "dev" will become a switchdev interface at some point, somehow, probably by magic. With this patch, assisted address learning on the CPU port works again in DSA: ip link add br0 type bridge ip link set swp0 master br0 ip link set eno0 master br0 ip link set br0 up [ 46.708929] mscc_felix 0000:00:00.5 swp0: Adding FDB entry towards eno0, addr 00:04:9f:05:f4:ab vid 0 as host address Fixes: 8ca07176ab00 ("net: switchdev: introduce a fanout helper for SWITCHDEV_FDB_{ADD,DEL}_TO_DEVICE") Reported-by: Eric Woudstra <ericwouds@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21net: switchdev: recurse into __switchdev_handle_fdb_del_to_deviceVladimir Oltean
The difference between __switchdev_handle_fdb_del_to_device and switchdev_handle_del_to_device is that the former takes an extra orig_dev argument, while the latter starts with dev == orig_dev. We should recurse into the variant that does not lose the orig_dev along the way. This is relevant when deleting FDB entries pointing towards a bridge (dev changes to the lower interfaces, but orig_dev shouldn't). The addition helper already recurses properly, just the deletion one doesn't. Fixes: 8ca07176ab00 ("net: switchdev: introduce a fanout helper for SWITCHDEV_FDB_{ADD,DEL}_TO_DEVICE") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net: switchdev: introduce a fanout helper for SWITCHDEV_FDB_{ADD,DEL}_TO_DEVICEVladimir Oltean
Currently DSA has an issue with FDB entries pointing towards the bridge in the presence of br_fdb_replay() being called at port join and leave time. In particular, each bridge port will ask for a replay for the FDB entries pointing towards the bridge when it joins, and for another replay when it leaves. This means that for example, a bridge with 4 switch ports will notify DSA 4 times of the bridge MAC address. But if the MAC address of the bridge changes during the normal runtime of the system, the bridge notifies switchdev [ once ] of the deletion of the old MAC address as a local FDB towards the bridge, and of the insertion [ again once ] of the new MAC address as a local FDB. This is a problem, because DSA keeps the old MAC address as a host FDB entry with refcount 4 (4 ports asked for it using br_fdb_replay). So the old MAC address will not be deleted. Additionally, the new MAC address will only be installed with refcount 1, and when the first switch port leaves the bridge (leaving 3 others as still members), it will delete with it the new MAC address of the bridge from the local FDB entries kept by DSA (because the br_fdb_replay call on deletion will bring the entry's refcount from 1 to 0). So the problem, really, is that the number of br_fdb_replay() calls is not matched with the refcount that a host FDB is offloaded to DSA during normal runtime. An elegant way to solve the problem would be to make the switchdev notification emitted by br_fdb_change_mac_address() result in a host FDB kept by DSA which has a refcount exactly equal to the number of ports under that bridge. Then, no matter how many DSA ports join or leave that bridge, the host FDB entry will always be deleted when there are exactly zero remaining DSA switch ports members of the bridge. To implement the proposed solution, we remember that the switchdev objects and port attributes have some helpers provided by switchdev, which can be optionally called by drivers: switchdev_handle_port_obj_{add,del} and switchdev_handle_port_attr_set. These helpers: - fan out a switchdev object/attribute emitted for the bridge towards all the lower interfaces that pass the check_cb(). - fan out a switchdev object/attribute emitted for a bridge port that is a LAG towards all the lower interfaces that pass the check_cb(). In other words, this is the model we need for the FDB events too: something that will keep an FDB entry emitted towards a physical port as it is, but translate an FDB entry emitted towards the bridge into N FDB entries, one per physical port. Of course, there are many differences between fanning out a switchdev object (VLAN) on 3 lower interfaces of a LAG and fanning out an FDB entry on 3 lower interfaces of a LAG. Intuitively, an FDB entry towards a LAG should be treated specially, because FDB entries are unicast, we can't just install the same address towards 3 destinations. It is imaginable that drivers might want to treat this case specifically, so create some methods for this case and do not recurse into the LAG lower ports, just the bridge ports. DSA also listens for FDB entries on "foreign" interfaces, aka interfaces bridged with us which are not part of our hardware domain: think an Ethernet switch bridged with a Wi-Fi AP. For those addresses, DSA installs host FDB entries. However, there we have the same problem (those host FDB entries are installed with a refcount of only 1) and an even bigger one which we did not have with FDB entries towards the bridge: br_fdb_replay() is currently not called for FDB entries on foreign interfaces, just for the physical port and for the bridge itself. So when DSA sniffs an address learned by the software bridge towards a foreign interface like an e1000 port, and then that e1000 leaves the bridge, DSA remains with the dangling host FDB address. That will be fixed separately by replaying all FDB entries and not just the ones towards the port and the bridge. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28net: switchdev: add a context void pointer to struct switchdev_notifier_infoVladimir Oltean
In the case where the driver asks for a replay of a certain type of event (port object or attribute) for a bridge port that is a LAG, it may do so because this port has just joined the LAG. But there might already be other switchdev ports in that LAG, and it is preferable that those preexisting switchdev ports do not act upon the replayed event. The solution is to add a context to switchdev events, which is NULL most of the time (when the bridge layer initiates the call) but which can be set to a value controlled by the switchdev driver when a replay is requested. The driver can then check the context to figure out if all ports within the LAG should act upon the switchdev event, or just the ones that match the context. We have to modify all switchdev_handle_* helper functions as well as the prototypes in the drivers that use these helpers too, because these helpers hide the underlying struct switchdev_notifier_info from us and there is no way to retrieve the context otherwise. The context structure will be populated and used in later patches. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-14net: bridge: propagate extack through switchdev_port_attr_setVladimir Oltean
The benefit is the ability to propagate errors from switchdev drivers for the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING and SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL attributes. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12net: switchdev: propagate extack to port attributesVladimir Oltean
When a struct switchdev_attr is notified through switchdev, there is no way to report informational messages, unlike for struct switchdev_obj. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@nvidia.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/can/dev.c b552766c872f ("can: dev: prevent potential information leak in can_fill_info()") 3e77f70e7345 ("can: dev: move driver related infrastructure into separate subdir") 0a042c6ec991 ("can: dev: move netlink related code into seperate file") Code move. drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c 57ac4a31c483 ("net/mlx5e: Correctly handle changing the number of queues when the interface is down") 214baf22870c ("net/mlx5e: Support HTB offload") Adjacent code changes net/switchdev/switchdev.c 20776b465c0c ("net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP") ffb68fc58e96 ("net: switchdev: remove the transaction structure from port object notifiers") bae33f2b5afe ("net: switchdev: remove the transaction structure from port attributes") Transaction parameter gets dropped otherwise keep the fix. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27net: switchdev: use obj-$(CONFIG_NET_SWITCHDEV) form in net/MakefileMasahiro Yamada
CONFIG_NET_SWITCHDEV is a bool option. Change the ifeq conditional to the standard obj-$(CONFIG_NET_SWITCHDEV) form. Use obj-y in net/switchdev/Makefile because Kbuild visits this Makefile only when CONFIG_NET_SWITCHDEV=y. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20210125231659.106201-3-masahiroy@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPPRasmus Villemoes
It's not true that switchdev_port_obj_notify() only inspects the ->handled field of "struct switchdev_notifier_port_obj_info" if call_switchdev_blocking_notifiers() returns 0 - there's a WARN_ON() triggering for a non-zero return combined with ->handled not being true. But the real problem here is that -EOPNOTSUPP is not being properly handled. The wrapper functions switchdev_handle_port_obj_add() et al change a return value of -EOPNOTSUPP to 0, and the treatment of ->handled in switchdev_port_obj_notify() seems to be designed to change that back to -EOPNOTSUPP in case nobody actually acted on the notifier (i.e., everybody returned -EOPNOTSUPP). Currently, as soon as some device down the stack passes the check_cb() check, ->handled gets set to true, which means that switchdev_port_obj_notify() cannot actually ever return -EOPNOTSUPP. This, for example, means that the detection of hardware offload support in the MRP code is broken: switchdev_port_obj_add() used by br_mrp_switchdev_send_ring_test() always returns 0, so since the MRP code thinks the generation of MRP test frames has been offloaded, no such frames are actually put on the wire. Similarly, br_mrp_switchdev_set_ring_role() also always returns 0, causing mrp->ring_role_offloaded to be set to 1. To fix this, continue to set ->handled true if any callback returns success or any error distinct from -EOPNOTSUPP. But if all the callbacks return -EOPNOTSUPP, make sure that ->handled stays false, so the logic in switchdev_port_obj_notify() can propagate that information. Fixes: 9a9f26e8f7ea ("bridge: mrp: Connect MRP API with the switchdev API") Fixes: f30f0601eb93 ("switchdev: Add helpers to aid traversal through lower devices") Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Link: https://lore.kernel.org/r/20210125124116.102928-1-rasmus.villemoes@prevas.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11net: switchdev: remove the transaction structure from port attributesVladimir Oltean
Since the introduction of the switchdev API, port attributes were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port attribute notifier structures, and converts drivers to not look at this member. In part, this patch contains a revert of my previous commit 2e554a7a5d8a ("net: dsa: propagate switchdev vlan_filtering prepare phase to drivers"). For the most part, the conversion was trivial except for: - Rocker's world implementation based on Broadcom OF-DPA had an odd implementation of ofdpa_port_attr_bridge_flags_set. The conversion was done mechanically, by pasting the implementation twice, then only keeping the code that would get executed during prepare phase on top, then only keeping the code that gets executed during the commit phase on bottom, then simplifying the resulting code until this was obtained. - DSA's offloading of STP state, bridge flags, VLAN filtering and multicast router could be converted right away. But the ageing time could not, so a shim was introduced and this was left for a further commit. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Linus Walleij <linus.walleij@linaro.org> # RTL8366RB Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11net: switchdev: delete switchdev_port_obj_add_nowVladimir Oltean
After the removal of the transactional model inside switchdev_port_obj_add_now, it has no added value and we can just call switchdev_port_obj_notify directly, bypassing this function. Let's delete it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11net: switchdev: remove the transaction structure from port object notifiersVladimir Oltean
Since the introduction of the switchdev API, port objects were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port object notifier structures, and converts drivers to not look at this member. Where driver conversion is trivial (like in the case of the Marvell Prestera driver, NXP DPAA2 switch, TI CPSW, and Rocker drivers), it is done in this patch. Where driver conversion needs more attention (DSA, Mellanox Spectrum), the conversion is left for subsequent patches and here we only fake the prepare/commit phases at a lower level, just not in the switchdev notifier itself. Where the code has a natural structure that is best left alone as a preparation and a commit phase (as in the case of the Ocelot switch), that structure is left in place, just made to not depend upon the switchdev transactional model. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-23net: switchdev: Fixed kerneldoc warningTian Tao
Update kernel-doc line comments to fix warnings reported by make W=1. net/switchdev/switchdev.c:413: warning: Function parameter or member 'extack' not described in 'call_switchdev_notifiers' Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13net: switchdev: kerneldoc fixesAndrew Lunn
Simple fixes which require no deep knowledge of the code. Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-26net: switchdev: do not propagate bridge updates across bridgesRussell King
When configuring a tree of independent bridges, propagating changes from the upper bridge across a bridge master to the lower bridge ports brings surprises. For example, a lower bridge may have vlan filtering enabled. It may have a vlan interface attached to the bridge master, which may then be incorporated into another bridge. As soon as the lower bridge vlan interface is attached to the upper bridge, the lower bridge has vlan filtering disabled. This occurs because switchdev recursively applies its changes to all lower devices no matter what. Reviewed-by: Ido Schimmel <idosch@mellanox.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-17net: switchdev: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-01switchdev: Remove unused transaction item queueFlorian Fainelli
There are no more in tree users of the switchdev_trans_item_{dequeue,enqueue} or switchdev_trans_item structure in the kernel since commit 00fc0c51e35b ("rocker: Change world_ops API and implementation to be switchdev independant"). Remove this unused code and update the documentation accordingly since. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-27net: switchdev: Replace port attr set SDO with a notificationFlorian Fainelli
Drop switchdev_ops.switchdev_port_attr_set. Drop the uses of this field from all clients, which were migrated to use switchdev notification in the previous patches. Add a new function switchdev_port_attr_notify() that sends the switchdev notifications SWITCHDEV_PORT_ATTR_SET and calls the blocking (process) notifier chain. We have one odd case within net/bridge/br_switchdev.c with the SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS attribute identifier that requires executing from atomic context, we deal with that one specifically. Drop __switchdev_port_attr_set() and update switchdev_port_attr_set() likewise. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-27switchdev: Add SWITCHDEV_PORT_ATTR_SETFlorian Fainelli
In preparation for allowing switchdev enabled drivers to veto specific attribute settings from within the context of the caller, introduce a new switchdev notifier type for port attributes. Suggested-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24switchdev: Complete removal of switchdev_port_attr_get()Florian Fainelli
We have no more in tree users of switchdev_port_attr_get() after d0e698d57a94 ("Merge branch 'net-Get-rid-of-switchdev_port_attr_get'") so completely remove the function signature and body. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06net: Get rid of SWITCHDEV_ATTR_ID_PORT_PARENT_IDFlorian Fainelli
Now that we have a dedicated NDO for getting a port's parent ID, get rid of SWITCHDEV_ATTR_ID_PORT_PARENT_ID and convert all callers to use the NDO exclusively. This is a preliminary change to getting rid of switchdev_ops eventually. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17switchdev: Add extack argument to call_switchdev_notifiers()Petr Machata
A follow-up patch will enable vetoing of FDB entries. Make it possible to communicate details of why an FDB entry is not acceptable back to the user. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-12net: switchdev: Add extack to switchdev_handle_port_obj_add() callbackPetr Machata
Drivers use switchdev_handle_port_obj_add() to handle recursive descent through lower devices. Change this function prototype to take add_cb that itself takes an extack argument. Decode extack from switchdev_notifier_port_obj_info and pass it to add_cb. Update mlxsw and ocelot drivers which use this helper. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-12net: switchdev: Add extack to struct switchdev_notifier_infoPetr Machata
In order to pass extack to the drivers that need it, add an extack field to struct switchdev_notifier_info, and an extack argument to the function call_switchdev_blocking_notifiers(). Also add a helper function switchdev_notifier_info_to_extack(). Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-12net: switchdev: Add extack argument to switchdev_port_obj_add()Petr Machata
After the previous patch, bridge driver has extack argument available to pass to switchdev. Therefore extend switchdev_port_obj_add() with this argument, updating all callers, and passing the argument through to switchdev_port_obj_notify(). Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23switchdev: Replace port obj add/del SDO with a notificationPetr Machata
Drop switchdev_ops.switchdev_port_obj_add and _del. Drop the uses of this field from all clients, which were migrated to use switchdev notification in the previous patches. Add a new function switchdev_port_obj_notify() that sends the switchdev notifications SWITCHDEV_PORT_OBJ_ADD and _DEL. Update switchdev_port_obj_del_now() to dispatch to this new function. Drop __switchdev_port_obj_add() and update switchdev_port_obj_add() likewise. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23switchdev: Add helpers to aid traversal through lower devicesPetr Machata
After the transition from switchdev operations to notifier chain (which will take place in following patches), the onus is on the driver to find its own devices below possible layer of LAG or other uppers. The logic to do so is fairly repetitive: each driver is looking for its own devices among the lowers of the notified device. For those that it finds, it calls a handler. To indicate that the event was handled, struct switchdev_notifier_port_obj_info.handled is set. The differences lie only in what constitutes an "own" device and what handler to call. Therefore abstract this logic into two helpers, switchdev_handle_port_obj_add() and switchdev_handle_port_obj_del(). If a driver only supports physical ports under a bridge device, it will simply avoid this layer of indirection. One area where this helper diverges from the current switchdev behavior is the case of mixed lowers, some of which are switchdev ports and some of which are not. Previously, such scenario would fail with -EOPNOTSUPP. The helper could do that for lowers for which the passed-in predicate doesn't hold. That would however break the case that switchdev ports from several different drivers are stashed under one master, a scenario that switchdev currently happily supports. Therefore tolerate any and all unknown netdevices, whether they are backed by a switchdev driver or not. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23switchdev: Add a blocking notifier chainPetr Machata
In general one can't assume that a switchdev notifier is called in a non-atomic context, and correspondingly, the switchdev notifier chain is an atomic one. However, port object addition and deletion messages are delivered from a process context. Even the MDB addition messages, whose delivery is scheduled from atomic context, are queued and the delivery itself takes place in blocking context. For VLAN messages in particular, keeping the blocking nature is important for error reporting. Therefore introduce a blocking notifier chain and related service functions to distribute the notifications for which a blocking context can be assumed. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10net: bridge: Add/del switchdev object on host join/leaveAndrew Lunn
When the host joins or leaves a multicast group, use switchdev to add an object to the hardware to forward traffic for the group to the host. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: switchdev: Remove bridge bypass support from switchdevArkadi Sharshevsky
Currently the bridge port flags, vlans, FDBs and MDBs can be offloaded through the bridge code, making the switchdev's SELF bridge bypass implementation to be redundant. This implies several changes: - No need for dump infra in switchdev, DSA's special case is handled privately. - Remove obj_dump from switchdev_ops. - FDBs are removed from obj_add/del routines, due to the fact that they are offloaded through the bridge notification chain. - The switchdev_port_bridge_xx() and switchdev_port_fdb_xx() functions can be removed. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: Move FDB dump implementation inside DSAArkadi Sharshevsky
>From all switchdev devices only DSA requires special FDB dump. This is due to lack of ability for syncing the hardware learned FDBs with the bridge. Due to this it is removed from switchdev and moved inside DSA. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08net: switchdev: Change notifier chain to be atomicArkadi Sharshevsky
In order to use the switchdev notifier chain for FDB sync with the device it has to be changed to atomic. The is done because the bridge can learn new FDBs in atomic context. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13netlink: pass extended ACK struct to parsing functionsJohannes Berg
Pass the new extended ACK reporting struct to all of the generic netlink parsing functions. For now, pass NULL in almost all callers (except for some in the core.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Mostly simple overlapping changes. For example, David Ahern's adjacency list revamp in 'net-next' conflicted with an adjacency list traversal bug fix in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29switchdev: Remove redundant variableIdo Schimmel
Instead of storing return value in 'err' and returning, just return directly. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19switchdev: Execute bridge ndos only for bridge portsIdo Schimmel
We recently got the following warning after setting up a vlan device on top of an offloaded bridge and executing 'bridge link': WARNING: CPU: 0 PID: 18566 at drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c:81 mlxsw_sp_port_orig_get.part.9+0x55/0x70 [mlxsw_spectrum] [...] CPU: 0 PID: 18566 Comm: bridge Not tainted 4.8.0-rc7 #1 Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox switch, BIOS 4.6.5 05/21/2015 0000000000000286 00000000e64ab94f ffff880406e6f8f0 ffffffff8135eaa3 0000000000000000 0000000000000000 ffff880406e6f930 ffffffff8108c43b 0000005106e6f988 ffff8803df398840 ffff880403c60108 ffff880406e6f990 Call Trace: [<ffffffff8135eaa3>] dump_stack+0x63/0x90 [<ffffffff8108c43b>] __warn+0xcb/0xf0 [<ffffffff8108c56d>] warn_slowpath_null+0x1d/0x20 [<ffffffffa01420d5>] mlxsw_sp_port_orig_get.part.9+0x55/0x70 [mlxsw_spectrum] [<ffffffffa0142195>] mlxsw_sp_port_attr_get+0xa5/0xb0 [mlxsw_spectrum] [<ffffffff816f151f>] switchdev_port_attr_get+0x4f/0x140 [<ffffffff816f15d0>] switchdev_port_attr_get+0x100/0x140 [<ffffffff816f15d0>] switchdev_port_attr_get+0x100/0x140 [<ffffffff816f1d6b>] switchdev_port_bridge_getlink+0x5b/0xc0 [<ffffffff816f2680>] ? switchdev_port_fdb_dump+0x90/0x90 [<ffffffff815f5427>] rtnl_bridge_getlink+0xe7/0x190 [<ffffffff8161a1b2>] netlink_dump+0x122/0x290 [<ffffffff8161b0df>] __netlink_dump_start+0x15f/0x190 [<ffffffff815f5340>] ? rtnl_bridge_dellink+0x230/0x230 [<ffffffff815fab46>] rtnetlink_rcv_msg+0x1a6/0x220 [<ffffffff81208118>] ? __kmalloc_node_track_caller+0x208/0x2c0 [<ffffffff815f5340>] ? rtnl_bridge_dellink+0x230/0x230 [<ffffffff815fa9a0>] ? rtnl_newlink+0x890/0x890 [<ffffffff8161cf54>] netlink_rcv_skb+0xa4/0xc0 [<ffffffff815f56f8>] rtnetlink_rcv+0x28/0x30 [<ffffffff8161c92c>] netlink_unicast+0x18c/0x240 [<ffffffff8161ccdb>] netlink_sendmsg+0x2fb/0x3a0 [<ffffffff815c5a48>] sock_sendmsg+0x38/0x50 [<ffffffff815c6031>] SYSC_sendto+0x101/0x190 [<ffffffff815c7111>] ? __sys_recvmsg+0x51/0x90 [<ffffffff815c6b6e>] SyS_sendto+0xe/0x10 [<ffffffff817017f2>] entry_SYSCALL_64_fastpath+0x1a/0xa4 The problem is that the 8021q module propagates the call to ndo_bridge_getlink() via switchdev ops, but the switch driver doesn't recognize the netdev, as it's not offloaded. While we can ignore calls being made to non-bridge ports inside the driver, a better fix would be to push this check up to the switchdev layer. Note that these ndos can be called for non-bridged netdev, but this only happens in certain PF drivers which don't call the corresponding switchdev functions anyway. Fixes: 99f44bb3527b ("mlxsw: spectrum: Enable L3 interfaces on top of bridge devices") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Tamir Winetroub <tamirw@mellanox.com> Tested-by: Tamir Winetroub <tamirw@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28switchdev: remove FIB offload infrastructureJiri Pirko
Since this is now taken care of by FIB notifier, remove the code, with all unused dependencies. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28fib: introduce FIB info offload flag helpersJiri Pirko
These helpers are to be used in case someone offloads the FIB entry. The result is that if the entry is offloaded to at least one device, the offload flag is set. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01rtnetlink: fdb dump: optimize by saving last interface markersRoopa Prabhu
fdb dumps spanning multiple skb's currently restart from the first interface again for every skb. This results in unnecessary iterations on the already visited interfaces and their fdb entries. In large scale setups, we have seen this to slow down fdb dumps considerably. On a system with 30k macs we see fdb dumps spanning across more than 300 skbs. To fix the problem, this patch replaces the existing single fdb marker with three markers: netdev hash entries, netdevs and fdb index to continue where we left off instead of restarting from the first netdev. This is consistent with link dumps. In the process of fixing the performance issue, this patch also re-implements fix done by commit 472681d57a5d ("net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump") (with an internal fix from Wilson Kok) in the following ways: - change ndo_fdb_dump handlers to return error code instead of the last fdb index - use cb->args strictly for dump frag markers and not error codes. This is consistent with other dump functions. Below results were taken on a system with 1000 netdevs and 35085 fdb entries: before patch: $time bridge fdb show | wc -l 15065 real 1m11.791s user 0m0.070s sys 1m8.395s (existing code does not return all macs) after patch: $time bridge fdb show | wc -l 35085 real 0m2.017s user 0m0.113s sys 0m1.942s Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26bridge: switchdev: Add forward mark support for stacked devicesIdo Schimmel
switchdev_port_fwd_mark_set() is used to set the 'offload_fwd_mark' of port netdevs so that packets being flooded by the device won't be flooded twice. It works by assigning a unique identifier (the ifindex of the first bridge port) to bridge ports sharing the same parent ID. This prevents packets from being flooded twice by the same switch, but will flood packets through bridge ports belonging to a different switch. This method is problematic when stacked devices are taken into account, such as VLANs. In such cases, a physical port netdev can have upper devices being members in two different bridges, thus requiring two different 'offload_fwd_mark's to be configured on the port netdev, which is impossible. The main problem is that packet and netdev marking is performed at the physical netdev level, whereas flooding occurs between bridge ports, which are not necessarily port netdevs. Instead, packet and netdev marking should really be done in the bridge driver with the switch driver only telling it which packets it already forwarded. The bridge driver will mark such packets using the mark assigned to the ingress bridge port and will prevent the packet from being forwarded through any bridge port sharing the same mark (i.e. having the same parent ID). Remove the current switchdev 'offload_fwd_mark' implementation and instead implement the proposed method. In addition, make rocker - the sole user of the mark - use the proposed method. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26switchdev: Support parent ID comparison for stacked devicesIdo Schimmel
switchdev_port_same_parent_id() currently expects port netdevs, but we need it to support stacked devices in the next patch, so drop the NO_RECURSE flag. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15switchdev: Put export declaration in the right placeOr Gerlitz
Move exporting of switchdev_port_same_parent_id to be right below it and not elsewhere. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reported-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net/switchdev: Export the same parent ID service functionOr Gerlitz
This helper serves to know if two switchdev port netdevices belong to the same HW ASIC, e.g to figure out if forwarding offload is possible between them. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-17switchdev: pass pointer to fib_info instead of copyJiri Pirko
The problem is that fib_info->nh is [0] so the struct fib_info allocation size depends on number of nexthops. If we just copy fib_info, we do not copy the nexthops info and driver accesses memory which is not ours. Given the fact that fib4 does not defer operations and therefore it does not need copy, just pass the pointer down to drivers as it was done before. Fixes: 850d0cbc91 ("switchdev: remove pointers from switchdev objects") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-14net: switchdev: Drop EXPERIMENTAL from descriptionFlorian Fainelli
Switchdev has been around for quite a while now, putting "EXPERIMENTAL" in the description is no longer accurate, drop it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>