summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2024-11-14Merge tag 'net-6.12-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bluetooth. Quite calm week. No new regression under investigation. Current release - regressions: - eth: revert "igb: Disable threaded IRQ for igb_msix_other" Current release - new code bugs: - bluetooth: btintel: direct exception event to bluetooth stack Previous releases - regressions: - core: fix data-races around sk->sk_forward_alloc - netlink: terminate outstanding dump on socket close - mptcp: error out earlier on disconnect - vsock: fix accept_queue memory leak - phylink: ensure PHY momentary link-fails are handled - eth: mlx5: - fix null-ptr-deref in add rule err flow - lock FTE when checking if active - eth: dwmac-mediatek: fix inverted handling of mediatek,mac-wol Previous releases - always broken: - sched: fix u32's systematic failure to free IDR entries for hnodes. - sctp: fix possible UAF in sctp_v6_available() - eth: bonding: add ns target multicast address to slave device - eth: mlx5: fix msix vectors to respect platform limit - eth: icssg-prueth: fix 1 PPS sync" * tag 'net-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits) net: sched: u32: Add test case for systematic hnode IDR leaks selftests: bonding: add ns multicast group testing bonding: add ns target multicast address to slave device net: ti: icssg-prueth: Fix 1 PPS sync stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines net: Make copy_safe_from_sockptr() match documentation net: stmmac: dwmac-mediatek: Fix inverted handling of mediatek,mac-wol ipmr: Fix access to mfc_cache_list without lock held samples: pktgen: correct dev to DEV net: phylink: ensure PHY momentary link-fails are handled mptcp: pm: use _rcu variant under rcu_read_lock mptcp: hold pm lock when deleting entry mptcp: update local address flags when setting it net: sched: cls_u32: Fix u32's systematic failure to free IDR entries for hnodes. MAINTAINERS: Re-add cancelled Renesas driver sections Revert "igb: Disable threaded IRQ for igb_msix_other" Bluetooth: btintel: Direct exception event to bluetooth stack Bluetooth: hci_core: Fix calling mgmt_device_connected virtio/vsock: Improve MSG_ZEROCOPY error handling vsock: Fix sk_error_queue memory leak ...
2024-11-13ipmr: Fix access to mfc_cache_list without lock heldBreno Leitao
Accessing `mr_table->mfc_cache_list` is protected by an RCU lock. In the following code flow, the RCU read lock is not held, causing the following error when `RCU_PROVE` is not held. The same problem might show up in the IPv6 code path. 6.12.0-rc5-kbuilder-01145-gbac17284bdcb #33 Tainted: G E N ----------------------------- net/ipv4/ipmr_base.c:313 RCU-list traversed in non-reader section!! rcu_scheduler_active = 2, debug_locks = 1 2 locks held by RetransmitAggre/3519: #0: ffff88816188c6c0 (nlk_cb_mutex-ROUTE){+.+.}-{3:3}, at: __netlink_dump_start+0x8a/0x290 #1: ffffffff83fcf7a8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_dumpit+0x6b/0x90 stack backtrace: lockdep_rcu_suspicious mr_table_dump ipmr_rtm_dumproute rtnl_dump_all rtnl_dumpit netlink_dump __netlink_dump_start rtnetlink_rcv_msg netlink_rcv_skb netlink_unicast netlink_sendmsg This is not a problem per see, since the RTNL lock is held here, so, it is safe to iterate in the list without the RCU read lock, as suggested by Eric. To alleviate the concern, modify the code to use list_for_each_entry_rcu() with the RTNL-held argument. The annotation will raise an error only if RTNL or RCU read lock are missing during iteration, signaling a legitimate problem, otherwise it will avoid this false positive. This will solve the IPv6 case as well, since ip6mr_rtm_dumproute() calls this function as well. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20241108-ipmr_rcu-v2-1-c718998e209b@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13mptcp: pm: use _rcu variant under rcu_read_lockMatthieu Baerts (NGI0)
In mptcp_pm_create_subflow_or_signal_addr(), rcu_read_(un)lock() are used as expected to iterate over the list of local addresses, but list_for_each_entry() was used instead of list_for_each_entry_rcu() in __lookup_addr(). It is important to use this variant which adds the required READ_ONCE() (and diagnostic checks if enabled). Because __lookup_addr() is also used in mptcp_pm_nl_set_flags() where it is called under the pernet->lock and not rcu_read_lock(), an extra condition is then passed to help the diagnostic checks making sure either the associated spin lock or the RCU lock is held. Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-3-b835580cefa8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13mptcp: hold pm lock when deleting entryGeliang Tang
When traversing userspace_pm_local_addr_list and deleting an entry from it in mptcp_pm_nl_remove_doit(), msk->pm.lock should be held. This patch holds this lock before mptcp_userspace_pm_lookup_addr_by_id() and releases it after list_move() in mptcp_pm_nl_remove_doit(). Fixes: d9a4594edabf ("mptcp: netlink: Add MPTCP_PM_CMD_REMOVE") Cc: stable@vger.kernel.org Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-2-b835580cefa8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13mptcp: update local address flags when setting itGeliang Tang
Just like in-kernel pm, when userspace pm does set_flags, it needs to send out MP_PRIO signal, and also modify the flags of the corresponding address entry in the local address list. This patch implements the missing logic. Traverse all address entries on userspace_pm_local_addr_list to find the local address entry, if bkup is true, set the flags of this entry with FLAG_BACKUP, otherwise, clear FLAG_BACKUP. Fixes: 892f396c8e68 ("mptcp: netlink: issue MP_PRIO signals from userspace PMs") Cc: stable@vger.kernel.org Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-1-b835580cefa8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfLinus Torvalds
Pull bpf fixes from Daniel Borkmann: - Fix a mismatching RCU unlock flavor in bpf_out_neigh_v6 (Jiawei Ye) - Fix BPF sockmap with kTLS to reject vsock and unix sockets upon kTLS context retrieval (Zijian Zhang) - Fix BPF bits iterator selftest for s390x (Hou Tao) * tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Fix mismatched RCU unlock flavour in bpf_out_neigh_v6 bpf: Add sk_is_inet and IS_ICSK check in tls_sw_has_ctx_tx/rx selftests/bpf: Use -4095 as the bad address for bits iterator
2024-11-12net: sched: cls_u32: Fix u32's systematic failure to free IDR entries for ↵Alexandre Ferrieux
hnodes. To generate hnode handles (in gen_new_htid()), u32 uses IDR and encodes the returned small integer into a structured 32-bit word. Unfortunately, at disposal time, the needed decoding is not done. As a result, idr_remove() fails, and the IDR fills up. Since its size is 2048, the following script ends up with "Filter already exists": tc filter add dev myve $FILTER1 tc filter add dev myve $FILTER2 for i in {1..2048} do echo $i tc filter del dev myve $FILTER2 tc filter add dev myve $FILTER2 done This patch adds the missing decoding logic for handles that deserve it. Fixes: e7614370d6f0 ("net_sched: use idr to allocate u32 filter handles") Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Alexandre Ferrieux <alexandre.ferrieux@orange.com> Tested-by: Victor Nogueira <victor@mojatatu.com> Link: https://patch.msgid.link/20241110172836.331319-1-alexandre.ferrieux@orange.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-12Bluetooth: hci_core: Fix calling mgmt_device_connectedLuiz Augusto von Dentz
Since 61a939c68ee0 ("Bluetooth: Queue incoming ACL data until BT_CONNECTED state is reached") there is no long the need to call mgmt_device_connected as ACL data will be queued until BT_CONNECTED state. Link: https://bugzilla.kernel.org/show_bug.cgi?id=219458 Link: https://github.com/bluez/bluez/issues/1014 Fixes: 333b4fd11e89 ("Bluetooth: L2CAP: Fix uaf in l2cap_connect") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-12virtio/vsock: Improve MSG_ZEROCOPY error handlingMichal Luczaj
Add a missing kfree_skb() to prevent memory leaks. Fixes: 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY flag support") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-12vsock: Fix sk_error_queue memory leakMichal Luczaj
Kernel queues MSG_ZEROCOPY completion notifications on the error queue. Where they remain, until explicitly recv()ed. To prevent memory leaks, clean up the queue when the socket is destroyed. unreferenced object 0xffff8881028beb00 (size 224): comm "vsock_test", pid 1218, jiffies 4294694897 hex dump (first 32 bytes): 90 b0 21 17 81 88 ff ff 90 b0 21 17 81 88 ff ff ..!.......!..... 00 00 00 00 00 00 00 00 00 b0 21 17 81 88 ff ff ..........!..... backtrace (crc 6c7031ca): [<ffffffff81418ef7>] kmem_cache_alloc_node_noprof+0x2f7/0x370 [<ffffffff81d35882>] __alloc_skb+0x132/0x180 [<ffffffff81d2d32b>] sock_omalloc+0x4b/0x80 [<ffffffff81d3a8ae>] msg_zerocopy_realloc+0x9e/0x240 [<ffffffff81fe5cb2>] virtio_transport_send_pkt_info+0x412/0x4c0 [<ffffffff81fe6183>] virtio_transport_stream_enqueue+0x43/0x50 [<ffffffff81fe0813>] vsock_connectible_sendmsg+0x373/0x450 [<ffffffff81d233d5>] ____sys_sendmsg+0x365/0x3a0 [<ffffffff81d246f4>] ___sys_sendmsg+0x84/0xd0 [<ffffffff81d26f47>] __sys_sendmsg+0x47/0x80 [<ffffffff820d3df3>] do_syscall_64+0x93/0x180 [<ffffffff8220012b>] entry_SYSCALL_64_after_hwframe+0x76/0x7e Fixes: 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY flag support") Signed-off-by: Michal Luczaj <mhal@rbox.co> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-12virtio/vsock: Fix accept_queue memory leakMichal Luczaj
As the final stages of socket destruction may be delayed, it is possible that virtio_transport_recv_listen() will be called after the accept_queue has been flushed, but before the SOCK_DONE flag has been set. As a result, sockets enqueued after the flush would remain unremoved, leading to a memory leak. vsock_release __vsock_release lock virtio_transport_release virtio_transport_close schedule_delayed_work(close_work) sk_shutdown = SHUTDOWN_MASK (!) flush accept_queue release virtio_transport_recv_pkt vsock_find_bound_socket lock if flag(SOCK_DONE) return virtio_transport_recv_listen child = vsock_create_connected (!) vsock_enqueue_accept(child) release close_work lock virtio_transport_do_close set_flag(SOCK_DONE) virtio_transport_remove_sock vsock_remove_sock vsock_remove_bound release Introduce a sk_shutdown check to disallow vsock_enqueue_accept() during socket destruction. unreferenced object 0xffff888109e3f800 (size 2040): comm "kworker/5:2", pid 371, jiffies 4294940105 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 28 00 0b 40 00 00 00 00 00 00 00 00 00 00 00 00 (..@............ backtrace (crc 9e5f4e84): [<ffffffff81418ff1>] kmem_cache_alloc_noprof+0x2c1/0x360 [<ffffffff81d27aa0>] sk_prot_alloc+0x30/0x120 [<ffffffff81d2b54c>] sk_alloc+0x2c/0x4b0 [<ffffffff81fe049a>] __vsock_create.constprop.0+0x2a/0x310 [<ffffffff81fe6d6c>] virtio_transport_recv_pkt+0x4dc/0x9a0 [<ffffffff81fe745d>] vsock_loopback_work+0xfd/0x140 [<ffffffff810fc6ac>] process_one_work+0x20c/0x570 [<ffffffff810fce3f>] worker_thread+0x1bf/0x3a0 [<ffffffff811070dd>] kthread+0xdd/0x110 [<ffffffff81044fdd>] ret_from_fork+0x2d/0x50 [<ffffffff8100785a>] ret_from_fork_asm+0x1a/0x30 Fixes: 3fe356d58efa ("vsock/virtio: discard packets only when socket is really closed") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-11mptcp: cope racing subflow creation in mptcp_rcv_space_adjustPaolo Abeni
Additional active subflows - i.e. created by the in kernel path manager - are included into the subflow list before starting the 3whs. A racing recvmsg() spooling data received on an already established subflow would unconditionally call tcp_cleanup_rbuf() on all the current subflows, potentially hitting a divide by zero error on the newly created ones. Explicitly check that the subflow is in a suitable state before invoking tcp_cleanup_rbuf(). Fixes: c76c6956566f ("mptcp: call tcp_cleanup_rbuf on subflows") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/02374660836e1b52afc91966b7535c8c5f7bafb0.1731060874.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11mptcp: error out earlier on disconnectPaolo Abeni
Eric reported a division by zero splat in the MPTCP protocol: Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 6094 Comm: syz-executor317 Not tainted 6.12.0-rc5-syzkaller-00291-g05b92660cdfe #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__tcp_select_window+0x5b4/0x1310 net/ipv4/tcp_output.c:3163 Code: f6 44 01 e3 89 df e8 9b 75 09 f8 44 39 f3 0f 8d 11 ff ff ff e8 0d 74 09 f8 45 89 f4 e9 04 ff ff ff e8 00 74 09 f8 44 89 f0 99 <f7> 7c 24 14 41 29 d6 45 89 f4 e9 ec fe ff ff e8 e8 73 09 f8 48 89 RSP: 0018:ffffc900041f7930 EFLAGS: 00010293 RAX: 0000000000017e67 RBX: 0000000000017e67 RCX: ffffffff8983314b RDX: 0000000000000000 RSI: ffffffff898331b0 RDI: 0000000000000004 RBP: 00000000005d6000 R08: 0000000000000004 R09: 0000000000017e67 R10: 0000000000003e80 R11: 0000000000000000 R12: 0000000000003e80 R13: ffff888031d9b440 R14: 0000000000017e67 R15: 00000000002eb000 FS: 00007feb5d7f16c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007feb5d8adbb8 CR3: 0000000074e4c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __tcp_cleanup_rbuf+0x3e7/0x4b0 net/ipv4/tcp.c:1493 mptcp_rcv_space_adjust net/mptcp/protocol.c:2085 [inline] mptcp_recvmsg+0x2156/0x2600 net/mptcp/protocol.c:2289 inet_recvmsg+0x469/0x6a0 net/ipv4/af_inet.c:885 sock_recvmsg_nosec net/socket.c:1051 [inline] sock_recvmsg+0x1b2/0x250 net/socket.c:1073 __sys_recvfrom+0x1a5/0x2e0 net/socket.c:2265 __do_sys_recvfrom net/socket.c:2283 [inline] __se_sys_recvfrom net/socket.c:2279 [inline] __x64_sys_recvfrom+0xe0/0x1c0 net/socket.c:2279 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7feb5d857559 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007feb5d7f1208 EFLAGS: 00000246 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 00007feb5d8e1318 RCX: 00007feb5d857559 RDX: 000000800000000e RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007feb5d8e1310 R08: 0000000000000000 R09: ffffffff81000000 R10: 0000000000000100 R11: 0000000000000246 R12: 00007feb5d8e131c R13: 00007feb5d8ae074 R14: 000000800000000e R15: 00000000fffffdef and provided a nice reproducer. The root cause is the current bad handling of racing disconnect. After the blamed commit below, sk_wait_data() can return (with error) with the underlying socket disconnected and a zero rcv_mss. Catch the error and return without performing any additional operations on the current socket. Reported-by: Eric Dumazet <edumazet@google.com> Fixes: 419ce133ab92 ("tcp: allow again tcp_disconnect() when threads are waiting") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/8c82ecf71662ecbc47bf390f9905de70884c9f2d.1731060874.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11net: fix SO_DEVMEM_DONTNEED looping too longMina Almasry
Exit early if we're freeing more than 1024 frags, to prevent looping too long. Also minor code cleanups: - Flip checks to reduce indentation. - Use sizeof(*tokens) everywhere for consistentcy. Cc: Yi Lai <yi1.lai@linux.intel.com> Signed-off-by: Mina Almasry <almasrymina@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20241107210331.3044434-1-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11net: fix data-races around sk->sk_forward_allocWang Liang
Syzkaller reported this warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 16 at net/ipv4/af_inet.c:156 inet_sock_destruct+0x1c5/0x1e0 Modules linked in: CPU: 0 UID: 0 PID: 16 Comm: ksoftirqd/0 Not tainted 6.12.0-rc5 #26 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:inet_sock_destruct+0x1c5/0x1e0 Code: 24 12 4c 89 e2 5b 48 c7 c7 98 ec bb 82 41 5c e9 d1 18 17 ff 4c 89 e6 5b 48 c7 c7 d0 ec bb 82 41 5c e9 bf 18 17 ff 0f 0b eb 83 <0f> 0b eb 97 0f 0b eb 87 0f 0b e9 68 ff ff ff 66 66 2e 0f 1f 84 00 RSP: 0018:ffffc9000008bd90 EFLAGS: 00010206 RAX: 0000000000000300 RBX: ffff88810b172a90 RCX: 0000000000000007 RDX: 0000000000000002 RSI: 0000000000000300 RDI: ffff88810b172a00 RBP: ffff88810b172a00 R08: ffff888104273c00 R09: 0000000000100007 R10: 0000000000020000 R11: 0000000000000006 R12: ffff88810b172a00 R13: 0000000000000004 R14: 0000000000000000 R15: ffff888237c31f78 FS: 0000000000000000(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffc63fecac8 CR3: 000000000342e000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __warn+0x88/0x130 ? inet_sock_destruct+0x1c5/0x1e0 ? report_bug+0x18e/0x1a0 ? handle_bug+0x53/0x90 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? inet_sock_destruct+0x1c5/0x1e0 __sk_destruct+0x2a/0x200 rcu_do_batch+0x1aa/0x530 ? rcu_do_batch+0x13b/0x530 rcu_core+0x159/0x2f0 handle_softirqs+0xd3/0x2b0 ? __pfx_smpboot_thread_fn+0x10/0x10 run_ksoftirqd+0x25/0x30 smpboot_thread_fn+0xdd/0x1d0 kthread+0xd3/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace 0000000000000000 ]--- Its possible that two threads call tcp_v6_do_rcv()/sk_forward_alloc_add() concurrently when sk->sk_state == TCP_LISTEN with sk->sk_lock unlocked, which triggers a data-race around sk->sk_forward_alloc: tcp_v6_rcv tcp_v6_do_rcv skb_clone_and_charge_r sk_rmem_schedule __sk_mem_schedule sk_forward_alloc_add() skb_set_owner_r sk_mem_charge sk_forward_alloc_add() __kfree_skb skb_release_all skb_release_head_state sock_rfree sk_mem_uncharge sk_forward_alloc_add() sk_mem_reclaim // set local var reclaimable __sk_mem_reclaim sk_forward_alloc_add() In this syzkaller testcase, two threads call tcp_v6_do_rcv() with skb->truesize=768, the sk_forward_alloc changes like this: (cpu 1) | (cpu 2) | sk_forward_alloc ... | ... | 0 __sk_mem_schedule() | | +4096 = 4096 | __sk_mem_schedule() | +4096 = 8192 sk_mem_charge() | | -768 = 7424 | sk_mem_charge() | -768 = 6656 ... | ... | sk_mem_uncharge() | | +768 = 7424 reclaimable=7424 | | | sk_mem_uncharge() | +768 = 8192 | reclaimable=8192 | __sk_mem_reclaim() | | -4096 = 4096 | __sk_mem_reclaim() | -8192 = -4096 != 0 The skb_clone_and_charge_r() should not be called in tcp_v6_do_rcv() when sk->sk_state is TCP_LISTEN, it happens later in tcp_v6_syn_recv_sock(). Fix the same issue in dccp_v6_do_rcv(). Suggested-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Fixes: e994b2f0fb92 ("tcp: do not lock listener to process SYN packets") Signed-off-by: Wang Liang <wangliang74@huawei.com> Link: https://patch.msgid.link/20241107023405.889239-1-wangliang74@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio fixes from Michael Tsirkin: "Several small bugfixes all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa/mlx5: Fix error path during device add vp_vdpa: fix id_table array not null terminated error virtio_pci: Fix admin vq cleanup by using correct info pointer vDPA/ifcvf: Fix pci_read_config_byte() return code handling Fix typo in vringh_test.c vdpa: solidrun: Fix UB bug with devres vsock/virtio: Initialization of the dangling pointer occurring in vsk->trans
2024-11-09sctp: fix possible UAF in sctp_v6_available()Eric Dumazet
A lockdep report [1] with CONFIG_PROVE_RCU_LIST=y hints that sctp_v6_available() is calling dev_get_by_index_rcu() and ipv6_chk_addr() without holding rcu. [1] ============================= WARNING: suspicious RCU usage 6.12.0-rc5-virtme #1216 Tainted: G W ----------------------------- net/core/dev.c:876 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by sctp_hello/31495: #0: ffff9f1ebbdb7418 (sk_lock-AF_INET6){+.+.}-{0:0}, at: sctp_bind (./arch/x86/include/asm/jump_label.h:27 net/sctp/socket.c:315) sctp stack backtrace: CPU: 7 UID: 0 PID: 31495 Comm: sctp_hello Tainted: G W 6.12.0-rc5-virtme #1216 Tainted: [W]=WARN Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:123) lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822) dev_get_by_index_rcu (net/core/dev.c:876 (discriminator 7)) sctp_v6_available (net/sctp/ipv6.c:701) sctp sctp_do_bind (net/sctp/socket.c:400 (discriminator 1)) sctp sctp_bind (net/sctp/socket.c:320) sctp inet6_bind_sk (net/ipv6/af_inet6.c:465) ? security_socket_bind (security/security.c:4581 (discriminator 1)) __sys_bind (net/socket.c:1848 net/socket.c:1869) ? do_user_addr_fault (./include/linux/rcupdate.h:347 ./include/linux/rcupdate.h:880 ./include/linux/mm.h:729 arch/x86/mm/fault.c:1340) ? do_user_addr_fault (./arch/x86/include/asm/preempt.h:84 (discriminator 13) ./include/linux/rcupdate.h:98 (discriminator 13) ./include/linux/rcupdate.h:882 (discriminator 13) ./include/linux/mm.h:729 (discriminator 13) arch/x86/mm/fault.c:1340 (discriminator 13)) __x64_sys_bind (net/socket.c:1877 (discriminator 1) net/socket.c:1875 (discriminator 1) net/socket.c:1875 (discriminator 1)) do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f59b934a1e7 Code: 44 00 00 48 8b 15 39 8c 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 b8 31 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 09 8c 0c 00 f7 d8 64 89 01 48 All code ======== 0: 44 00 00 add %r8b,(%rax) 3: 48 8b 15 39 8c 0c 00 mov 0xc8c39(%rip),%rdx # 0xc8c43 a: f7 d8 neg %eax c: 64 89 02 mov %eax,%fs:(%rdx) f: b8 ff ff ff ff mov $0xffffffff,%eax 14: eb bd jmp 0xffffffffffffffd3 16: 66 2e 0f 1f 84 00 00 cs nopw 0x0(%rax,%rax,1) 1d: 00 00 00 20: 0f 1f 00 nopl (%rax) 23: b8 31 00 00 00 mov $0x31,%eax 28: 0f 05 syscall 2a:* 48 3d 01 f0 ff ff cmp $0xfffffffffffff001,%rax <-- trapping instruction 30: 73 01 jae 0x33 32: c3 ret 33: 48 8b 0d 09 8c 0c 00 mov 0xc8c09(%rip),%rcx # 0xc8c43 3a: f7 d8 neg %eax 3c: 64 89 01 mov %eax,%fs:(%rcx) 3f: 48 rex.W Code starting with the faulting instruction =========================================== 0: 48 3d 01 f0 ff ff cmp $0xfffffffffffff001,%rax 6: 73 01 jae 0x9 8: c3 ret 9: 48 8b 0d 09 8c 0c 00 mov 0xc8c09(%rip),%rcx # 0xc8c19 10: f7 d8 neg %eax 12: 64 89 01 mov %eax,%fs:(%rcx) 15: 48 rex.W RSP: 002b:00007ffe2d0ad398 EFLAGS: 00000202 ORIG_RAX: 0000000000000031 RAX: ffffffffffffffda RBX: 00007ffe2d0ad3d0 RCX: 00007f59b934a1e7 RDX: 000000000000001c RSI: 00007ffe2d0ad3d0 RDI: 0000000000000005 RBP: 0000000000000005 R08: 1999999999999999 R09: 0000000000000000 R10: 00007f59b9253298 R11: 0000000000000202 R12: 00007ffe2d0ada61 R13: 0000000000000000 R14: 0000562926516dd8 R15: 00007f59b9479000 </TASK> Fixes: 6fe1e52490a9 ("sctp: check ipv6 addr with sk_bound_dev if set") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Xin Long <lucien.xin@gmail.com> Link: https://patch.msgid.link/20241107192021.2579789-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-08bpf: Fix mismatched RCU unlock flavour in bpf_out_neigh_v6Jiawei Ye
In the bpf_out_neigh_v6 function, rcu_read_lock() is used to begin an RCU read-side critical section. However, when unlocking, one branch incorrectly uses a different RCU unlock flavour rcu_read_unlock_bh() instead of rcu_read_unlock(). This mismatch in RCU locking flavours can lead to unexpected behavior and potential concurrency issues. This possible bug was identified using a static analysis tool developed by myself, specifically designed to detect RCU-related issues. This patch corrects the mismatched unlock flavour by replacing the incorrect rcu_read_unlock_bh() with the appropriate rcu_read_unlock(), ensuring that the RCU critical section is properly exited. This change prevents potential synchronization issues and aligns with proper RCU usage patterns. Fixes: 09eed1192cec ("neighbour: switch to standard rcu, instead of rcu_bh") Signed-off-by: Jiawei Ye <jiawei.ye@foxmail.com> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/tencent_CFD3D1C3D68B45EA9F52D8EC76D2C4134306@qq.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-11-07netlink: terminate outstanding dump on socket closeJakub Kicinski
Netlink supports iterative dumping of data. It provides the families the following ops: - start - (optional) kicks off the dumping process - dump - actual dump helper, keeps getting called until it returns 0 - done - (optional) pairs with .start, can be used for cleanup The whole process is asynchronous and the repeated calls to .dump don't actually happen in a tight loop, but rather are triggered in response to recvmsg() on the socket. This gives the user full control over the dump, but also means that the user can close the socket without getting to the end of the dump. To make sure .start is always paired with .done we check if there is an ongoing dump before freeing the socket, and if so call .done. The complication is that sockets can get freed from BH and .done is allowed to sleep. So we use a workqueue to defer the call, when needed. Unfortunately this does not work correctly. What we defer is not the cleanup but rather releasing a reference on the socket. We have no guarantee that we own the last reference, if someone else holds the socket they may release it in BH and we're back to square one. The whole dance, however, appears to be unnecessary. Only the user can interact with dumps, so we can clean up when socket is closed. And close always happens in process context. Some async code may still access the socket after close, queue notification skbs to it etc. but no dumps can start, end or otherwise make progress. Delete the workqueue and flush the dump state directly from the release handler. Note that further cleanup is possible in -next, for instance we now always call .done before releasing the main module reference, so dump doesn't have to take a reference of its own. Reported-by: syzkaller <syzkaller@googlegroups.com> Fixes: ed5d7788a934 ("netlink: Do not schedule work from sk_destruct") Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241106015235.2458807-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-07Merge tag 'net-6.12-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from can and netfilter. Things are slowing down quite a bit, mostly driver fixes here. No known ongoing investigations. Current release - new code bugs: - eth: ti: am65-cpsw: - fix multi queue Rx on J7 - fix warning in am65_cpsw_nuss_remove_rx_chns() Previous releases - regressions: - mptcp: do not require admin perm to list endpoints, got missed in a refactoring - mptcp: use sock_kfree_s instead of kfree Previous releases - always broken: - sctp: properly validate chunk size in sctp_sf_ootb() fix OOB access - virtio_net: make RSS interact properly with queue number - can: mcp251xfd: mcp251xfd_get_tef_len(): fix length calculation - can: mcp251xfd: mcp251xfd_ring_alloc(): fix coalescing configuration when switching CAN modes Misc: - revert earlier hns3 fixes, they were ignoring IOMMU abstractions and need to be reworked - can: {cc770,sja1000}_isa: allow building on x86_64" * tag 'net-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits) drivers: net: ionic: add missed debugfs cleanup to ionic_probe() error path net/smc: do not leave a dangling sk pointer in __smc_create() rxrpc: Fix missing locking causing hanging calls net/smc: Fix lookup of netdev by using ib_device_get_netdev() net: arc: rockchip: fix emac mdio node support net: arc: fix the device for dma_map_single/dma_unmap_single virtio_net: Update rss when set queue virtio_net: Sync rss config to device when virtnet_probe virtio_net: Add hash_key_length check virtio_net: Support dynamic rss indirection table size netfilter: nf_tables: wait for rcu grace period on net_device removal net: stmmac: Fix unbalanced IRQ wake disable warning on single irq case net: vertexcom: mse102x: Fix possible double free of TX skb mptcp: use sock_kfree_s instead of kfree mptcp: no admin perm to list endpoints net: phy: ti: add PHY_RST_AFTER_CLK_EN flag net: ethernet: ti: am65-cpsw: fix warning in am65_cpsw_nuss_remove_rx_chns() net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7 net: hns3: fix kernel crash when uninstalling driver Revert "Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'" ...
2024-11-07net/smc: do not leave a dangling sk pointer in __smc_create()Eric Dumazet
Thanks to commit 4bbd360a5084 ("socket: Print pf->create() when it does not clear sock->sk on failure."), syzbot found an issue with AF_SMC: smc_create must clear sock->sk on failure, family: 43, type: 1, protocol: 0 WARNING: CPU: 0 PID: 5827 at net/socket.c:1565 __sock_create+0x96f/0xa30 net/socket.c:1563 Modules linked in: CPU: 0 UID: 0 PID: 5827 Comm: syz-executor259 Not tainted 6.12.0-rc6-next-20241106-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__sock_create+0x96f/0xa30 net/socket.c:1563 Code: 03 00 74 08 4c 89 e7 e8 4f 3b 85 f8 49 8b 34 24 48 c7 c7 40 89 0c 8d 8b 54 24 04 8b 4c 24 0c 44 8b 44 24 08 e8 32 78 db f7 90 <0f> 0b 90 90 e9 d3 fd ff ff 89 e9 80 e1 07 fe c1 38 c1 0f 8c ee f7 RSP: 0018:ffffc90003e4fda0 EFLAGS: 00010246 RAX: 099c6f938c7f4700 RBX: 1ffffffff1a595fd RCX: ffff888034823c00 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 00000000ffffffe9 R08: ffffffff81567052 R09: 1ffff920007c9f50 R10: dffffc0000000000 R11: fffff520007c9f51 R12: ffffffff8d2cafe8 R13: 1ffffffff1a595fe R14: ffffffff9a789c40 R15: ffff8880764298c0 FS: 000055557b518380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa62ff43225 CR3: 0000000031628000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sock_create net/socket.c:1616 [inline] __sys_socket_create net/socket.c:1653 [inline] __sys_socket+0x150/0x3c0 net/socket.c:1700 __do_sys_socket net/socket.c:1714 [inline] __se_sys_socket net/socket.c:1712 [inline] For reference, see commit 2d859aff775d ("Merge branch 'do-not-leave-dangling-sk-pointers-in-pf-create-functions'") Fixes: d25a92ccae6b ("net/smc: Introduce IPPROTO_SMC") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ignat Korchagin <ignat@cloudflare.com> Cc: D. Wythe <alibuda@linux.alibaba.com> Cc: Dust Li <dust.li@linux.alibaba.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Link: https://patch.msgid.link/20241106221922.1544045-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-07rxrpc: Fix missing locking causing hanging callsDavid Howells
If a call gets aborted (e.g. because kafs saw a signal) between it being queued for connection and the I/O thread picking up the call, the abort will be prioritised over the connection and it will be removed from local->new_client_calls by rxrpc_disconnect_client_call() without a lock being held. This may cause other calls on the list to disappear if a race occurs. Fix this by taking the client_call_lock when removing a call from whatever list its ->wait_link happens to be on. Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-afs@lists.infradead.org Reported-by: Marc Dionne <marc.dionne@auristor.com> Fixes: 9d35d880e0e4 ("rxrpc: Move client call connection to the I/O thread") Link: https://patch.msgid.link/726660.1730898202@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-07net/smc: Fix lookup of netdev by using ib_device_get_netdev()Wenjia Zhang
The SMC-R variant of the SMC protocol used direct call to function ib_device_ops.get_netdev() to lookup netdev. As we used mlx5 device driver to run SMC-R, it failed to find a device, because in mlx5_ib the internal net device management for retrieving net devices was replaced by a common interface ib_device_get_netdev() in commit 8d159eb2117b ("RDMA/mlx5: Use IB set_netdev and get_netdev functions"). Since such direct accesses to the internal net device management is not recommended at all, update the SMC-R code to use proper API ib_device_get_netdev(). Fixes: 54903572c23c ("net/smc: allow pnetid-less configuration") Reported-by: Aswin K <aswin@linux.ibm.com> Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Dust Li <dust.li@linux.alibaba.com> Reviewed-by: Wen Gu <guwen@linux.alibaba.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Reviewed-by: D. Wythe <alibuda@linux.alibaba.com> Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://patch.msgid.link/20241106082612.57803-1-wenjia@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-07Merge tag 'nf-24-11-07' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fix for net The following series contains a Netfilter fix: 1) Wait for rcu grace period after netdevice removal is reported via event. * tag 'nf-24-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: wait for rcu grace period on net_device removal ==================== Link: https://patch.msgid.link/20241107113212.116634-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-07netfilter: nf_tables: wait for rcu grace period on net_device removalPablo Neira Ayuso
8c873e219970 ("netfilter: core: free hooks with call_rcu") removed synchronize_net() call when unregistering basechain hook, however, net_device removal event handler for the NFPROTO_NETDEV was not updated to wait for RCU grace period. Note that 835b803377f5 ("netfilter: nf_tables_netdev: unregister hooks on net_device removal") does not remove basechain rules on device removal, I was hinted to remove rules on net_device removal later, see 5ebe0b0eec9d ("netfilter: nf_tables: destroy basechain and rules on netdevice removal"). Although NETDEV_UNREGISTER event is guaranteed to be handled after synchronize_net() call, this path needs to wait for rcu grace period via rcu callback to release basechain hooks if netns is alive because an ongoing netlink dump could be in progress (sockets hold a reference on the netns). Note that nf_tables_pre_exit_net() unregisters and releases basechain hooks but it is possible to see NETDEV_UNREGISTER at a later stage in the netns exit path, eg. veth peer device in another netns: cleanup_net() default_device_exit_batch() unregister_netdevice_many_notify() notifier_call_chain() nf_tables_netdev_event() __nft_release_basechain() In this particular case, same rule of thumb applies: if netns is alive, then wait for rcu grace period because netlink dump in the other netns could be in progress. Otherwise, if the other netns is going away then no netlink dump can be in progress and basechain hooks can be released inmediately. While at it, turn WARN_ON() into WARN_ON_ONCE() for the basechain validation, which should not ever happen. Fixes: 835b803377f5 ("netfilter: nf_tables_netdev: unregister hooks on net_device removal") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-11-06vsock/virtio: Initialization of the dangling pointer occurring in vsk->transHyunwoo Kim
During loopback communication, a dangling pointer can be created in vsk->trans, potentially leading to a Use-After-Free condition. This issue is resolved by initializing vsk->trans to NULL. Cc: stable <stable@kernel.org> Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko") Signed-off-by: Hyunwoo Kim <v4bel@theori.io> Signed-off-by: Wongi Lee <qwerty@theori.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Message-Id: <2024102245-strive-crib-c8d3@gregkh> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-11-05mptcp: use sock_kfree_s instead of kfreeGeliang Tang
The local address entries on userspace_pm_local_addr_list are allocated by sock_kmalloc(). It's then required to use sock_kfree_s() instead of kfree() to free these entries in order to adjust the allocated size on the sk side. Fixes: 24430f8bf516 ("mptcp: add address into userspace pm list") Cc: stable@vger.kernel.org Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241104-net-mptcp-misc-6-12-v1-2-c13f2ff1656f@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-05mptcp: no admin perm to list endpointsMatthieu Baerts (NGI0)
During the switch to YNL, the command to list all endpoints has been accidentally restricted to users with admin permissions. It looks like there are no reasons to have this restriction which makes it harder for a user to quickly check if the endpoint list has been correctly populated by an automated tool. Best to go back to the previous behaviour then. mptcp_pm_gen.c has been modified using ynl-gen-c.py: $ ./tools/net/ynl/ynl-gen-c.py --mode kernel \ --spec Documentation/netlink/specs/mptcp_pm.yaml --source \ -o net/mptcp/mptcp_pm_gen.c The header file doesn't need to be regenerated. Fixes: 1d0507f46843 ("net: mptcp: convert netlink from small_ops to ops") Cc: stable@vger.kernel.org Reviewed-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241104-net-mptcp-misc-6-12-v1-1-c13f2ff1656f@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-04sunrpc: handle -ENOTCONN in xs_tcp_setup_socket()NeilBrown
xs_tcp_finish_connecting() can return -ENOTCONN but the switch statement in xs_tcp_setup_socket() treats that as an unhandled error. If we treat it as a known error it would propagate back to call_connect_status() which does handle that error code. This appears to be the intention of the commit (given below) which added -ENOTCONN as a return status for xs_tcp_finish_connecting(). So add -ENOTCONN to the switch statement as an error to pass through to the caller. Link: https://bugzilla.suse.com/show_bug.cgi?id=1231050 Link: https://access.redhat.com/discussions/3434091 Fixes: 01d37c428ae0 ("SUNRPC: xprt_connect() don't abort the task if the transport isn't bound") Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
2024-11-03sctp: properly validate chunk size in sctp_sf_ootb()Xin Long
A size validation fix similar to that in Commit 50619dbf8db7 ("sctp: add size validation when walking chunks") is also required in sctp_sf_ootb() to address a crash reported by syzbot: BUG: KMSAN: uninit-value in sctp_sf_ootb+0x7f5/0xce0 net/sctp/sm_statefuns.c:3712 sctp_sf_ootb+0x7f5/0xce0 net/sctp/sm_statefuns.c:3712 sctp_do_sm+0x181/0x93d0 net/sctp/sm_sideeffect.c:1166 sctp_endpoint_bh_rcv+0xc38/0xf90 net/sctp/endpointola.c:407 sctp_inq_push+0x2ef/0x380 net/sctp/inqueue.c:88 sctp_rcv+0x3831/0x3b20 net/sctp/input.c:243 sctp4_rcv+0x42/0x50 net/sctp/protocol.c:1159 ip_protocol_deliver_rcu+0xb51/0x13d0 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x336/0x500 net/ipv4/ip_input.c:233 Reported-by: syzbot+f0cbb34d39392f2746ca@syzkaller.appspotmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Link: https://patch.msgid.link/a29ebb6d8b9f8affd0f9abb296faafafe10c17d8.1730223981.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-02Merge tag 'nfsd-6.12-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: - Fix two async COPY bugs found during NFS bake-a-thon - Fix an svcrdma memory leak * tag 'nfsd-6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: rpcrdma: Always release the rpcrdma_device's xa_array NFSD: Never decrement pending_async_copies on error NFSD: Initialize struct nfsd4_copy earlier
2024-10-31Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfLinus Torvalds
Pull bpf fixes from Daniel Borkmann: - Fix BPF verifier to force a checkpoint when the program's jump history becomes too long (Eduard Zingerman) - Add several fixes to the BPF bits iterator addressing issues like memory leaks and overflow problems (Hou Tao) - Fix an out-of-bounds write in trie_get_next_key (Byeonguk Jeong) - Fix BPF test infra's LIVE_FRAME frame update after a page has been recycled (Toke Høiland-Jørgensen) - Fix BPF verifier and undo the 40-bytes extra stack space for bpf_fastcall patterns due to various bugs (Eduard Zingerman) - Fix a BPF sockmap race condition which could trigger a NULL pointer dereference in sock_map_link_update_prog (Cong Wang) - Fix tcp_bpf_recvmsg_parser to retrieve seq_copied from tcp_sk under the socket lock (Jiayuan Chen) * tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, test_run: Fix LIVE_FRAME frame update after a page has been recycled selftests/bpf: Add three test cases for bits_iter bpf: Use __u64 to save the bits in bits iterator bpf: Check the validity of nr_words in bpf_iter_bits_new() bpf: Add bpf_mem_alloc_check_size() helper bpf: Free dynamically allocated bits in bpf_iter_bits_destroy() bpf: disallow 40-bytes extra stack for bpf_fastcall patterns selftests/bpf: Add test for trie_get_next_key() bpf: Fix out-of-bounds write in trie_get_next_key() selftests/bpf: Test with a very short loop bpf: Force checkpoint when jmp history is too long bpf: fix filed access without lock sock_map: fix a NULL pointer dereference in sock_map_link_update_prog()
2024-10-31Merge tag 'net-6.12-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from WiFi, bluetooth and netfilter. No known new regressions outstanding. Current release - regressions: - wifi: mt76: do not increase mcu skb refcount if retry is not supported Current release - new code bugs: - wifi: - rtw88: fix the RX aggregation in USB 3 mode - mac80211: fix memory corruption bug in struct ieee80211_chanctx Previous releases - regressions: - sched: - stop qdisc_tree_reduce_backlog on TC_H_ROOT - sch_api: fix xa_insert() error path in tcf_block_get_ext() - wifi: - revert "wifi: iwlwifi: remove retry loops in start" - cfg80211: clear wdev->cqm_config pointer on free - netfilter: fix potential crash in nf_send_reset6() - ip_tunnel: fix suspicious RCU usage warning in ip_tunnel_find() - bluetooth: fix null-ptr-deref in hci_read_supported_codecs - eth: mlxsw: add missing verification before pushing Tx header - eth: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue Previous releases - always broken: - wifi: mac80211: do not pass a stopped vif to the driver in .get_txpower - netfilter: sanitize offset and length before calling skb_checksum() - core: - fix crash when config small gso_max_size/gso_ipv4_max_size - skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension - mptcp: protect sched with rcu_read_lock - eth: ice: fix crash on probe for DPLL enabled E810 LOM - eth: macsec: fix use-after-free while sending the offloading packet - eth: stmmac: fix unbalanced DMA map/unmap for non-paged SKB data - eth: hns3: fix kernel crash when 1588 is sent on HIP08 devices - eth: mtk_wed: fix path of MT7988 WO firmware" * tag 'net-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits) net: hns3: fix kernel crash when 1588 is sent on HIP08 devices net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue net: hns3: initialize reset_timer before hclgevf_misc_irq_init() net: hns3: don't auto enable misc vector net: hns3: Resolved the issue that the debugfs query result is inconsistent. net: hns3: fix missing features due to dev->features configuration too early net: hns3: fixed reset failure issues caused by the incorrect reset type net: hns3: add sync command to sync io-pgtable net: hns3: default enable tx bounce buffer when smmu enabled netfilter: nft_payload: sanitize offset and length before calling skb_checksum() net: ethernet: mtk_wed: fix path of MT7988 WO firmware selftests: forwarding: Add IPv6 GRE remote change tests mlxsw: spectrum_ipip: Fix memory leak when changing remote IPv6 address mlxsw: pci: Sync Rx buffers for device mlxsw: pci: Sync Rx buffers for CPU mlxsw: spectrum_ptp: Add missing verification before pushing Tx header net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension Bluetooth: hci: fix null-ptr-deref in hci_read_supported_codecs netfilter: nf_reject_ipv6: fix potential crash in nf_send_reset6() netfilter: Fix use-after-free in get_info() ...
2024-10-31bpf, test_run: Fix LIVE_FRAME frame update after a page has been recycledToke Høiland-Jørgensen
The test_run code detects whether a page has been modified and re-initialises the xdp_frame structure if it has, using xdp_update_frame_from_buff(). However, xdp_update_frame_from_buff() doesn't touch frame->mem, so that wasn't correctly re-initialised, which led to the pages from page_pool not being returned correctly. Syzbot noticed this as a memory leak. Fix this by also copying the frame->mem structure when re-initialising the frame, like we do on initialisation of a new page from page_pool. Fixes: e5995bc7e2ba ("bpf, test_run: fix crashes due to XDP frame overwriting/corruption") Fixes: b530e9e1063e ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN") Reported-by: syzbot+d121e098da06af416d23@syzkaller.appspotmail.com Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: syzbot+d121e098da06af416d23@syzkaller.appspotmail.com Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://lore.kernel.org/bpf/20241030-test-run-mem-fix-v1-1-41e88e8cae43@redhat.com
2024-10-31Merge tag 'nf-24-10-31' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== The following patchset contains Netfilter fixes for net: 1) Remove unused parameters in conntrack_dump_flush.c used by selftests, from Liu Jing. 2) Fix possible UaF when removing xtables module via getsockopt() interface, from Dong Chenchen. 3) Fix potential crash in nf_send_reset6() reported by syzkaller. From Eric Dumazet 4) Validate offset and length before calling skb_checksum() in nft_payload, otherwise hitting BUG() is possible. netfilter pull request 24-10-31 * tag 'nf-24-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_payload: sanitize offset and length before calling skb_checksum() netfilter: nf_reject_ipv6: fix potential crash in nf_send_reset6() netfilter: Fix use-after-free in get_info() selftests: netfilter: remove unused parameter ==================== Link: https://patch.msgid.link/ Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-31Merge tag 'for-net-2024-10-30' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - hci: fix null-ptr-deref in hci_read_supported_codecs * tag 'for-net-2024-10-30' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci: fix null-ptr-deref in hci_read_supported_codecs ==================== Link: https://patch.msgid.link/20241030192205.38298-1-luiz.dentz@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-31netfilter: nft_payload: sanitize offset and length before calling skb_checksum()Pablo Neira Ayuso
If access to offset + length is larger than the skbuff length, then skb_checksum() triggers BUG_ON(). skb_checksum() internally subtracts the length parameter while iterating over skbuff, BUG_ON(len) at the end of it checks that the expected length to be included in the checksum calculation is fully consumed. Fixes: 7ec3f7b47b8d ("netfilter: nft_payload: add packet mangling support") Reported-by: Slavin Liu <slavin-ayu@qq.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-10-30net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extensionBenoît Monin
As documented in skbuff.h, devices with NETIF_F_IPV6_CSUM capability can only checksum TCP and UDP over IPv6 if the IP header does not contains extension. This is enforced for UDP packets emitted from user-space to an IPv6 address as they go through ip6_make_skb(), which calls __ip6_append_data() where a check is done on the header size before setting CHECKSUM_PARTIAL. But the introduction of UDP encapsulation with fou6 added a code-path where it is possible to get an skb with a partial UDP checksum and an IPv6 header with extension: * fou6 adds a UDP header with a partial checksum if the inner packet does not contains a valid checksum. * ip6_tunnel adds an IPv6 header with a destination option extension header if encap_limit is non-zero (the default value is 4). The thread linked below describes in more details how to reproduce the problem with GRE-in-UDP tunnel. Add a check on the network header size in skb_csum_hwoffload_help() to make sure no IPv6 packet with extension header is handed to a network device with NETIF_F_IPV6_CSUM capability. Link: https://lore.kernel.org/netdev/26548921.1r3eYUQgxm@benoit.monin/T/#u Fixes: aa3463d65e7b ("fou: Add encap ops for IPv6 tunnels") Signed-off-by: Benoît Monin <benoit.monin@gmx.fr> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/5fbeecfc311ea182aa1d1c771725ab8b4cac515e.1729778144.git.benoit.monin@gmx.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-30rpcrdma: Always release the rpcrdma_device's xa_arrayChuck Lever
Dai pointed out that the xa_init_flags() in rpcrdma_add_one() needs to have a matching xa_destroy() in rpcrdma_remove_one() to release underlying memory that the xarray might have accrued during operation. Reported-by: Dai Ngo <dai.ngo@oracle.com> Fixes: 7e86845a0346 ("rpcrdma: Implement generic device removal") Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2024-10-30Bluetooth: hci: fix null-ptr-deref in hci_read_supported_codecsSungwoo Kim
Fix __hci_cmd_sync_sk() to return not NULL for unknown opcodes. __hci_cmd_sync_sk() returns NULL if a command returns a status event. However, it also returns NULL where an opcode doesn't exist in the hci_cc table because hci_cmd_complete_evt() assumes status = skb->data[0] for unknown opcodes. This leads to null-ptr-deref in cmd_sync for HCI_OP_READ_LOCAL_CODECS as there is no hci_cc for HCI_OP_READ_LOCAL_CODECS, which always assumes status = skb->data[0]. KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 1 PID: 2000 Comm: kworker/u9:5 Not tainted 6.9.0-ga6bcb805883c-dirty #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci7 hci_power_on RIP: 0010:hci_read_supported_codecs+0xb9/0x870 net/bluetooth/hci_codec.c:138 Code: 08 48 89 ef e8 b8 c1 8f fd 48 8b 75 00 e9 96 00 00 00 49 89 c6 48 ba 00 00 00 00 00 fc ff df 4c 8d 60 70 4c 89 e3 48 c1 eb 03 <0f> b6 04 13 84 c0 0f 85 82 06 00 00 41 83 3c 24 02 77 0a e8 bf 78 RSP: 0018:ffff888120bafac8 EFLAGS: 00010212 RAX: 0000000000000000 RBX: 000000000000000e RCX: ffff8881173f0040 RDX: dffffc0000000000 RSI: ffffffffa58496c0 RDI: ffff88810b9ad1e4 RBP: ffff88810b9ac000 R08: ffffffffa77882a7 R09: 1ffffffff4ef1054 R10: dffffc0000000000 R11: fffffbfff4ef1055 R12: 0000000000000070 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88810b9ac000 FS: 0000000000000000(0000) GS:ffff8881f6c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6ddaa3439e CR3: 0000000139764003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> hci_read_local_codecs_sync net/bluetooth/hci_sync.c:4546 [inline] hci_init_stage_sync net/bluetooth/hci_sync.c:3441 [inline] hci_init4_sync net/bluetooth/hci_sync.c:4706 [inline] hci_init_sync net/bluetooth/hci_sync.c:4742 [inline] hci_dev_init_sync net/bluetooth/hci_sync.c:4912 [inline] hci_dev_open_sync+0x19a9/0x2d30 net/bluetooth/hci_sync.c:4994 hci_dev_do_open net/bluetooth/hci_core.c:483 [inline] hci_power_on+0x11e/0x560 net/bluetooth/hci_core.c:1015 process_one_work kernel/workqueue.c:3267 [inline] process_scheduled_works+0x8ef/0x14f0 kernel/workqueue.c:3348 worker_thread+0x91f/0xe50 kernel/workqueue.c:3429 kthread+0x2cb/0x360 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Fixes: abfeea476c68 ("Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERY") Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-10-30netfilter: nf_reject_ipv6: fix potential crash in nf_send_reset6()Eric Dumazet
I got a syzbot report without a repro [1] crashing in nf_send_reset6() I think the issue is that dev->hard_header_len is zero, and we attempt later to push an Ethernet header. Use LL_MAX_HEADER, as other functions in net/ipv6/netfilter/nf_reject_ipv6.c. [1] skbuff: skb_under_panic: text:ffffffff89b1d008 len:74 put:14 head:ffff88803123aa00 data:ffff88803123a9f2 tail:0x3c end:0x140 dev:syz_tun kernel BUG at net/core/skbuff.c:206 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 UID: 0 PID: 7373 Comm: syz.1.568 Not tainted 6.12.0-rc2-syzkaller-00631-g6d858708d465 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:skb_panic net/core/skbuff.c:206 [inline] RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216 Code: 0d 8d 48 c7 c6 60 a6 29 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 ba 30 38 02 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 RSP: 0018:ffffc900045269b0 EFLAGS: 00010282 RAX: 0000000000000088 RBX: dffffc0000000000 RCX: cd66dacdc5d8e800 RDX: 0000000000000000 RSI: 0000000000000200 RDI: 0000000000000000 RBP: ffff88802d39a3d0 R08: ffffffff8174afec R09: 1ffff920008a4ccc R10: dffffc0000000000 R11: fffff520008a4ccd R12: 0000000000000140 R13: ffff88803123aa00 R14: ffff88803123a9f2 R15: 000000000000003c FS: 00007fdbee5ff6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000005d322000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_push+0xe5/0x100 net/core/skbuff.c:2636 eth_header+0x38/0x1f0 net/ethernet/eth.c:83 dev_hard_header include/linux/netdevice.h:3208 [inline] nf_send_reset6+0xce6/0x1270 net/ipv6/netfilter/nf_reject_ipv6.c:358 nft_reject_inet_eval+0x3b9/0x690 net/netfilter/nft_reject_inet.c:48 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x4ad/0x1da0 net/netfilter/nf_tables_core.c:288 nft_do_chain_inet+0x418/0x6b0 net/netfilter/nft_chain_filter.c:161 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] br_nf_pre_routing_ipv6+0x63e/0x770 net/bridge/br_netfilter_ipv6.c:184 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_bridge_pre net/bridge/br_input.c:277 [inline] br_handle_frame+0x9fd/0x1530 net/bridge/br_input.c:424 __netif_receive_skb_core+0x13e8/0x4570 net/core/dev.c:5562 __netif_receive_skb_one_core net/core/dev.c:5666 [inline] __netif_receive_skb+0x12f/0x650 net/core/dev.c:5781 netif_receive_skb_internal net/core/dev.c:5867 [inline] netif_receive_skb+0x1e8/0x890 net/core/dev.c:5926 tun_rx_batched+0x1b7/0x8f0 drivers/net/tun.c:1550 tun_get_user+0x3056/0x47e0 drivers/net/tun.c:2007 tun_chr_write_iter+0x10d/0x1f0 drivers/net/tun.c:2053 new_sync_write fs/read_write.c:590 [inline] vfs_write+0xa6d/0xc90 fs/read_write.c:683 ksys_write+0x183/0x2b0 fs/read_write.c:736 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fdbeeb7d1ff Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 c9 8d 02 00 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 1c 8e 02 00 48 RSP: 002b:00007fdbee5ff000 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007fdbeed36058 RCX: 00007fdbeeb7d1ff RDX: 000000000000008e RSI: 0000000020000040 RDI: 00000000000000c8 RBP: 00007fdbeebf12be R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000008e R11: 0000000000000293 R12: 0000000000000000 R13: 0000000000000000 R14: 00007fdbeed36058 R15: 00007ffc38de06e8 </TASK> Fixes: c8d7b98bec43 ("netfilter: move nf_send_resetX() code to nf_reject_ipvX modules") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-10-30netfilter: Fix use-after-free in get_info()Dong Chenchen
ip6table_nat module unload has refcnt warning for UAF. call trace is: WARNING: CPU: 1 PID: 379 at kernel/module/main.c:853 module_put+0x6f/0x80 Modules linked in: ip6table_nat(-) CPU: 1 UID: 0 PID: 379 Comm: ip6tables Not tainted 6.12.0-rc4-00047-gc2ee9f594da8-dirty #205 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:module_put+0x6f/0x80 Call Trace: <TASK> get_info+0x128/0x180 do_ip6t_get_ctl+0x6a/0x430 nf_getsockopt+0x46/0x80 ipv6_getsockopt+0xb9/0x100 rawv6_getsockopt+0x42/0x190 do_sock_getsockopt+0xaa/0x180 __sys_getsockopt+0x70/0xc0 __x64_sys_getsockopt+0x20/0x30 do_syscall_64+0xa2/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Concurrent execution of module unload and get_info() trigered the warning. The root cause is as follows: cpu0 cpu1 module_exit //mod->state = MODULE_STATE_GOING ip6table_nat_exit xt_unregister_template kfree(t) //removed from templ_list getinfo() t = xt_find_table_lock list_for_each_entry(tmpl, &xt_templates[af]...) if (strcmp(tmpl->name, name)) continue; //table not found try_module_get list_for_each_entry(t, &xt_net->tables[af]...) return t; //not get refcnt module_put(t->me) //uaf unregister_pernet_subsys //remove table from xt_net list While xt_table module was going away and has been removed from xt_templates list, we couldnt get refcnt of xt_table->me. Check module in xt_net->tables list re-traversal to fix it. Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default") Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-10-29Merge tag 'wireless-2024-10-29' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== wireless fixes for v6.12-rc6 Another set of fixes, mostly iwlwifi: * fix infinite loop in 6 GHz scan if more than 255 colocated APs were reported * revert removal of retry loops for now to work around issues with firmware initialization on some devices/platforms * fix SAR table issues with some BIOSes * fix race in suspend/debug collection * fix memory leak in fw recovery * fix link ID leak in AP mode for older devices * fix sending TX power constraints * fix link handling in FW restart And also the stack: * fix setting TX power from userspace with the new chanctx emulation code for old-style drivers * fix a memory corruption bug due to structure embedding * fix CQM configuration double-free when moving between net namespaces * tag 'wireless-2024-10-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: ieee80211_i: Fix memory corruption bug in struct ieee80211_chanctx wifi: iwlwifi: mvm: fix 6 GHz scan construction wifi: cfg80211: clear wdev->cqm_config pointer on free mac80211: fix user-power when emulating chanctx Revert "wifi: iwlwifi: remove retry loops in start" wifi: iwlwifi: mvm: don't add default link in fw restart flow wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd() wifi: iwlwifi: mvm: SAR table alignment wifi: iwlwifi: mvm: Use the sync timepoint API in suspend wifi: iwlwifi: mvm: really send iwl_txpower_constraints_cmd wifi: iwlwifi: mvm: don't leak a link on AP removal ==================== Link: https://patch.msgid.link/20241029093926.13750-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-29net: fix crash when config small gso_max_size/gso_ipv4_max_sizeWang Liang
Config a small gso_max_size/gso_ipv4_max_size will lead to an underflow in sk_dst_gso_max_size(), which may trigger a BUG_ON crash, because sk->sk_gso_max_size would be much bigger than device limits. Call Trace: tcp_write_xmit tso_segs = tcp_init_tso_segs(skb, mss_now); tcp_set_skb_tso_segs tcp_skb_pcount_set // skb->len = 524288, mss_now = 8 // u16 tso_segs = 524288/8 = 65535 -> 0 tso_segs = DIV_ROUND_UP(skb->len, mss_now) BUG_ON(!tso_segs) Add check for the minimum value of gso_max_size and gso_ipv4_max_size. Fixes: 46e6b992c250 ("rtnetlink: allow GSO maximums to be set on device creation") Fixes: 9eefedd58ae1 ("net: add gso_ipv4_max_size and gro_ipv4_max_size per device") Signed-off-by: Wang Liang <wangliang74@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241023035213.517386-1-wangliang74@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-29net/sched: sch_api: fix xa_insert() error path in tcf_block_get_ext()Vladimir Oltean
This command: $ tc qdisc replace dev eth0 ingress_block 1 egress_block 1 clsact Error: block dev insert failed: -EBUSY. fails because user space requests the same block index to be set for both ingress and egress. [ side note, I don't think it even failed prior to commit 913b47d3424e ("net/sched: Introduce tc block netdev tracking infra"), because this is a command from an old set of notes of mine which used to work, but alas, I did not scientifically bisect this ] The problem is not that it fails, but rather, that the second time around, it fails differently (and irrecoverably): $ tc qdisc replace dev eth0 ingress_block 1 egress_block 1 clsact Error: dsa_core: Flow block cb is busy. [ another note: the extack is added by me for illustration purposes. the context of the problem is that clsact_init() obtains the same &q->ingress_block pointer as &q->egress_block, and since we call tcf_block_get_ext() on both of them, "dev" will be added to the block->ports xarray twice, thus failing the operation: once through the ingress block pointer, and once again through the egress block pointer. the problem itself is that when xa_insert() fails, we have emitted a FLOW_BLOCK_BIND command through ndo_setup_tc(), but the offload never sees a corresponding FLOW_BLOCK_UNBIND. ] Even correcting the bad user input, we still cannot recover: $ tc qdisc replace dev swp3 ingress_block 1 egress_block 2 clsact Error: dsa_core: Flow block cb is busy. Basically the only way to recover is to reboot the system, or unbind and rebind the net device driver. To fix the bug, we need to fill the correct error teardown path which was missed during code movement, and call tcf_block_offload_unbind() when xa_insert() fails. [ last note, fundamentally I blame the label naming convention in tcf_block_get_ext() for the bug. The labels should be named after what they do, not after the error path that jumps to them. This way, it is obviously wrong that two labels pointing to the same code mean something is wrong, and checking the code correctness at the goto site is also easier ] Fixes: 94e2557d086a ("net: sched: move block device tracking into tcf_block_get/put_ext()") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20241023100541.974362-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-29net/sched: stop qdisc_tree_reduce_backlog on TC_H_ROOTPedro Tammela
In qdisc_tree_reduce_backlog, Qdiscs with major handle ffff: are assumed to be either root or ingress. This assumption is bogus since it's valid to create egress qdiscs with major handle ffff: Budimir Markovic found that for qdiscs like DRR that maintain an active class list, it will cause a UAF with a dangling class pointer. In 066a3b5b2346, the concern was to avoid iterating over the ingress qdisc since its parent is itself. The proper fix is to stop when parent TC_H_ROOT is reached because the only way to retrieve ingress is when a hierarchy which does not contain a ffff: major handle call into qdisc_lookup with TC_H_MAJ(TC_H_ROOT). In the scenario where major ffff: is an egress qdisc in any of the tree levels, the updates will also propagate to TC_H_ROOT, which then the iteration must stop. Fixes: 066a3b5b2346 ("[NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop") Reported-by: Budimir Markovic <markovicbudimir@gmail.com> Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Tested-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> net/sched/sch_api.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241024165547.418570-1-jhs@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-29ipv4: ip_tunnel: Fix suspicious RCU usage warning in ip_tunnel_find()Ido Schimmel
The per-netns IP tunnel hash table is protected by the RTNL mutex and ip_tunnel_find() is only called from the control path where the mutex is taken. Add a lockdep expression to hlist_for_each_entry_rcu() in ip_tunnel_find() in order to validate that the mutex is held and to silence the suspicious RCU usage warning [1]. [1] WARNING: suspicious RCU usage 6.12.0-rc3-custom-gd95d9a31aceb #139 Not tainted ----------------------------- net/ipv4/ip_tunnel.c:221 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/362: #0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60 stack backtrace: CPU: 12 UID: 0 PID: 362 Comm: ip Not tainted 6.12.0-rc3-custom-gd95d9a31aceb #139 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl+0xba/0x110 lockdep_rcu_suspicious.cold+0x4f/0xd6 ip_tunnel_find+0x435/0x4d0 ip_tunnel_newlink+0x517/0x7a0 ipgre_newlink+0x14c/0x170 __rtnl_newlink+0x1173/0x19c0 rtnl_newlink+0x6c/0xa0 rtnetlink_rcv_msg+0x3cc/0xf60 netlink_rcv_skb+0x171/0x450 netlink_unicast+0x539/0x7f0 netlink_sendmsg+0x8c1/0xd80 ____sys_sendmsg+0x8f9/0xc20 ___sys_sendmsg+0x197/0x1e0 __sys_sendmsg+0x122/0x1f0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.") Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241023123009.749764-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-29bpf: fix filed access without lockJiayuan Chen
The tcp_bpf_recvmsg_parser() function, running in user context, retrieves seq_copied from tcp_sk without holding the socket lock, and stores it in a local variable seq. However, the softirq context can modify tcp_sk->seq_copied concurrently, for example, n tcp_read_sock(). As a result, the seq value is stale when it is assigned back to tcp_sk->copied_seq at the end of tcp_bpf_recvmsg_parser(), leading to incorrect behavior. Due to concurrency, the copied_seq field in tcp_bpf_recvmsg_parser() might be set to an incorrect value (less than the actual copied_seq) at the end of function: 'WRITE_ONCE(tcp->copied_seq, seq)'. This causes the 'offset' to be negative in tcp_read_sock()->tcp_recv_skb() when processing new incoming packets (sk->copied_seq - skb->seq becomes less than 0), and all subsequent packets will be dropped. Signed-off-by: Jiayuan Chen <mrpre@163.com> Link: https://lore.kernel.org/r/20241028065226.35568-1-mrpre@163.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-10-28sock_map: fix a NULL pointer dereference in sock_map_link_update_prog()Cong Wang
The following race condition could trigger a NULL pointer dereference: sock_map_link_detach(): sock_map_link_update_prog(): mutex_lock(&sockmap_mutex); ... sockmap_link->map = NULL; mutex_unlock(&sockmap_mutex); mutex_lock(&sockmap_mutex); ... sock_map_prog_link_lookup(sockmap_link->map); mutex_unlock(&sockmap_mutex); <continue> Fix it by adding a NULL pointer check. In this specific case, it makes no sense to update a link which is being released. Reported-by: Ruan Bonan <bonan.ruan@u.nus.edu> Fixes: 699c23f02c65 ("bpf: Add bpf_link support for sk_msg and sk_skb progs") Cc: Yonghong Song <yonghong.song@linux.dev> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Link: https://lore.kernel.org/r/20241026185522.338562-1-xiyou.wangcong@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-10-28mptcp: init: protect sched with rcu_read_lockMatthieu Baerts (NGI0)
Enabling CONFIG_PROVE_RCU_LIST with its dependence CONFIG_RCU_EXPERT creates this splat when an MPTCP socket is created: ============================= WARNING: suspicious RCU usage 6.12.0-rc2+ #11 Not tainted ----------------------------- net/mptcp/sched.c:44 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 no locks held by mptcp_connect/176. stack backtrace: CPU: 0 UID: 0 PID: 176 Comm: mptcp_connect Not tainted 6.12.0-rc2+ #11 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:123) lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822) mptcp_sched_find (net/mptcp/sched.c:44 (discriminator 7)) mptcp_init_sock (net/mptcp/protocol.c:2867 (discriminator 1)) ? sock_init_data_uid (arch/x86/include/asm/atomic.h:28) inet_create.part.0.constprop.0 (net/ipv4/af_inet.c:386) ? __sock_create (include/linux/rcupdate.h:347 (discriminator 1)) __sock_create (net/socket.c:1576) __sys_socket (net/socket.c:1671) ? __pfx___sys_socket (net/socket.c:1712) ? do_user_addr_fault (arch/x86/mm/fault.c:1419 (discriminator 1)) __x64_sys_socket (net/socket.c:1728) do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) That's because when the socket is initialised, rcu_read_lock() is not used despite the explicit comment written above the declaration of mptcp_sched_find() in sched.c. Adding the missing lock/unlock avoids the warning. Fixes: 1730b2b2c5a5 ("mptcp: add sched in mptcp_sock") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/523 Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241021-net-mptcp-sched-lock-v1-1-637759cf061c@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2025-01-12 05:52:21 +0000