summaryrefslogtreecommitdiff
path: root/sound/soc/codecs
AgeCommit message (Collapse)Author
2015-07-16Merge branches 'topic/owner' and 'topic/reg-default' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-max9877
2015-07-15ASoC: drivers: Drop owner assignment from i2c_driverKrzysztof Kozlowski
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-15Merge branches 'topic/rt298', 'topic/ts3a227e' and 'topic/cs42xx8' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-owner
2015-07-09ASoC: add rt298 codec driverBard Liao
It is the initial version of ALC298 codec driver. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-08ASoC: ts3a227e: do not report jack status when there is i2c read errFang, Yang A
After suspend -> resume the ts3a227e_interrupt sometimes comes before i2c controller resume is called .regmap_read will return incorrect status and report a wrong jack status.This patch will disable irq on suspend and enable irq again on the resume to make sure interrupt is coming after TI resumes. Also We should return if there is read err,the interrupt will come again since it is level triggered and we are not yet clear the interrupt. In addtion,cht_bsw_max98090_ti machine driver registered additional notifier base on jack event which will program the audio codec.there will be codec timeout err if such event occurs prior to i2c controller is resumed. Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-07ASoC: Constify reg_default tablesAxel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-07ASoC: cs42xx8: Setup of_match_tableAxel Lin
Setup of_match_table and since cs42xx8_of_match is exported and used in cs42xx8-i2c.c, it cannot be static. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-07ASoC: cs42xx8: Move the code checking *regmap argument earlierAxel Lin
Slightly improve the readability by moving the code checking *regmap argument earlier. Also move the assignment of of_id close to the place testing it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-22Merge remote-tracking branch 'asoc/topic/arizona' into asoc-nextMark Brown
2015-06-22Merge remote-tracking branch 'asoc/topic/wm8995' into asoc-nextMark Brown
2015-06-22Merge remote-tracking branches 'asoc/topic/wm8523' and 'asoc/topic/wm8741' ↵Mark Brown
into asoc-next
2015-06-22Merge remote-tracking branch 'asoc/topic/tas2552' into asoc-nextMark Brown
2015-06-22Merge remote-tracking branches 'asoc/topic/qcom', 'asoc/topic/rcar', ↵Mark Brown
'asoc/topic/rt286' and 'asoc/topic/rt5640' into asoc-next
2015-06-22Merge remote-tracking branches 'asoc/topic/mediatek', 'asoc/topic/ml26124' ↵Mark Brown
and 'asoc/topic/omap' into asoc-next
2015-06-22Merge remote-tracking branches 'asoc/topic/intel' and 'asoc/topic/max98090' ↵Mark Brown
into asoc-next
2015-06-22Merge remote-tracking branches 'asoc/topic/adsp' and 'asoc/topic/atmel' into ↵Mark Brown
asoc-next
2015-06-22Merge remote-tracking branch 'asoc/topic/rt5670' into asoc-nextMark Brown
2015-06-22Merge remote-tracking branch 'asoc/topic/rt5645' into asoc-nextMark Brown
2015-06-22Merge tag 'asoc-v4.2' into asoc-nextMark Brown
ASoC: Updates for v4.2 The big thing this release has been Liam's addition of topology support to the core. We've also seen quite a bit of driver work and the continuation of Lars' refactoring for component support. - Support for loading ASoC topology maps from firmware, intended to be used to allow self-describing DSP firmware images to be built which can map controls added by the DSP to userspace without the kernel needing to know about individual DSP firmwares. - Lots of refactoring to avoid direct access to snd_soc_codec where it's not needed supporting future refactoring. - Big refactoring and cleanup serieses for the Wolfson ADSP and TI TAS2552 drivers. - Support for TI TAS571x power amplifiers. - Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs. - Support for x86 systems with RT5650 and Qualcomm Storm. # gpg: Signature made Mon 08 Jun 2015 18:48:37 BST using RSA key ID 5D5487D0 # gpg: Oops: keyid_from_fingerprint: no pubkey # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
2015-06-22Merge remote-tracking branches 'asoc/fix/wm8737', 'asoc/fix/wm8903', ↵Mark Brown
'asoc/fix/wm8955' and 'asoc/fix/wm8960' into asoc-linus
2015-06-22Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/fmtbit', ↵Mark Brown
'asoc/fix/intel', 'asoc/fix/max98925', 'asoc/fix/rcar' and 'asoc/fix/ux500' into asoc-linus
2015-06-22Merge remote-tracking branch 'asoc/fix/rt5645' into asoc-linusMark Brown
2015-06-19ASoC: wm_adsp: Move DSP Rate controls into the codecRichard Fitzgerald
The rate controls are codec-specific, it's not possible to generically say what the range or the meaning of each control is (or even if they exist at all) - that depends on the particular codec. This is currently being handled for Arizona codecs by putting an Arizona-specific table of controls inside the wm_adsp driver. This creates a dependency between wm_adsp and arizona.c, and is an awkward solution if the ADSP is used in another family of codecs Fix this by moving the Arizona-specific rate controls into the Arizona codec drivers. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-19Merge branches 'topic/adsp' and 'topic/dapm' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-arizona
2015-06-17ASoC: wm8995: Fix setting sysclk for WM8995_SYSCLK_MCLK2 caseAxel Lin
Fix trivial typo. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-15ASoC: rt5645: move RT5650 muxes to rt5650_specific_dapm_widgetsMichele Curti
Developing a driver for an Asus X205TA laptop I get these dmesg errors: rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 ADC1 Swap Mux has no paths rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 ADC2 Swap Mux has no paths rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 ADC3 Swap Mux has no paths rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 ADC Mux has no paths rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 DAC1 L Mux has no paths rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 DAC1 R Mux has no paths rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 DAC2 L Mux has no paths rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 DAC2 R Mux has no paths so, move these muxes to the rt5650_specific_dapm_widgets[] list. Signed-off-by: Michele Curti <michele.curti@gmail.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-15ASoC: rt5670: Constify ACPI device ids and register defaultsMathias Krause
Constify the ACPI device ID array and the register map, no need to have them writable at runtime. Also drop the unneeded RT5670_INIT_REG_LEN define. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-15ASoC: max98090: Constify ACPI device ids and register defaultsMathias Krause
Constify the ACPI device ID array and the register map, no need to have them writable at runtime. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-15ASoC: rt5640: Constify ACPI device ids and register defaultsMathias Krause
Constify the ACPI device ID array and the register map, no need to have them writable at runtime. Also drop the unneeded RT5640_INIT_REG_LEN define. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-15ASoC: ml26124: Remove duplicate codeAxel Lin
Current code has duplicate code for 16000, 32000 and 48000 sample rates. get_srate() returns negative error code for unsupported rate, so we can remove the duplicate code in the swith cases by calling get_srate() first. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12ASoC: wm8523: Set bclk ratio for master modeJulian Scheel
When running in master mode the bclk divider must be configured to generate a sane bitclock. Pick the smallest fs multiplicator, which can hold all transmitted bits. Signed-off-by: Julian Scheel <julian@jusst.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12ASoC: wm8960: the enum of "DAC Polarity" should be wm8960_enum[1]Zidan Wang
the enum of "DAC Polarity" should be wm8960_enum[1]. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-06-12ASoC: rt5645: Use devm_gpiod_get_optional for hp-detectAxel Lin
Since hp-detect is optional, use devm_gpiod_get_optional instead. In additional, it should return error if devm_gpiod_get_optional fails. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12ASoC: rt5645: Add the device tree parserOder Chiou
Modify the RT5645 driver to parse platform data from device tree. This is missing from previous patch in sound/soc/codecs/rt5645.c, that was present in v3. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12ASoC: rt286: Add RL6347A class device shared support for RT286Oder Chiou
The patch separates the IO function from the rt286. It is prepared to share for new chips that support the same IO function. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-11ASoC: tas2552: Use devm_gpiod_get_optional for enable-gpioAxel Lin
commit ea178d1456dc ("ASoC: tas2552: Make the enable-gpio really optional") makes enable-gpio optional. devm_gpiod_get_optional() is the better function for optional gpio, so let's switch to use it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-11ASoC: wm_adsp: Add basic debugfs entriesRichard Fitzgerald
This patch adds some debugfs nodes to get information about the currently running firmware. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-11ASoC: wm_adsp: create ALSA controls from wm_adsp driverRichard Fitzgerald
Now that we have a codec_probe stage initialization in the wm_adsp driver, we can make the wm_adsp driver create its own ALSA controls instead of having that responsibility pushed to every codec driver. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-11ASoC: wm_adsp: Add codec_probe and codec_remove stubsRichard Fitzgerald
Currently the only init function in wm_adsp is called by the codec driver early in its probe before the codec has been registered with SOC. This patch adds stubs for the codec_probe and codec_remove stages and calls them from WM5102 and WM5110 codec drivers. This allows us to hang anything that needs setup during the codec probe stage off these functions without further modification of the codec drivers. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-10ASoC: rt5645: change gpio to gpiod APIsOder Chiou
Move gpio to gpio_desc and use gpiod APIs in codec driver. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-10Merge tag 'asoc-v4.2' into asoc-rt5645Mark Brown
ASoC: Updates for v4.2 The big thing this release has been Liam's addition of topology support to the core. We've also seen quite a bit of driver work and the continuation of Lars' refactoring for component support. - Support for loading ASoC topology maps from firmware, intended to be used to allow self-describing DSP firmware images to be built which can map controls added by the DSP to userspace without the kernel needing to know about individual DSP firmwares. - Lots of refactoring to avoid direct access to snd_soc_codec where it's not needed supporting future refactoring. - Big refactoring and cleanup serieses for the Wolfson ADSP and TI TAS2552 drivers. - Support for TI TAS571x power amplifiers. - Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs. - Support for x86 systems with RT5650 and Qualcomm Storm.
2015-06-10ASoC: rt5645: make RT5650_TDM_CTRL_4 readableOder Chiou
Register RT5650_TDM_CTRL_4(0x7A) is readable and used for mixer setting. It should be added in rt5645_readable_register function. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-10ASoC: rt5645: Lock mutex in rt5645_enable_push_button_irqNicolas Boichat
rt5645_enable_push_button_irq uses snd_soc_dapm_*_unlocked functions, so it needs to lock the required dapm mutex. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-08ASoC: wm8741: Allow master clock switchingSergej Sawazki
The set of supported sample rates depends on the master clock supplied to the codec. Allow the machine driver to set the required master clock in hw_params(). Signed-off-by: Sergej Sawazki <ce3a@gmx.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-08ASoC: tas2552: Use consistent name for 'struct tas2552_data'Peter Ujfalusi
In tas2552_sw_shutdown() tas_data is used while the rest of the driver uses tas2552 when dealing with the 'struct tas2552_data' Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-08ASoC: tas2552: Remove unneeded semicolonPeter Ujfalusi
Double semicolon was added by the following commit: ea178d1456dc ASoC: tas2552: Make the enable-gpio really optional Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-08ASoC: tas2552: Call pm_runtime_disable when the module is removedPeter Ujfalusi
The module can not be loaded again after it has been removed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-08ASoC: tas2552: Code, define alignment changes for uniformityPeter Ujfalusi
Align the numbers in the header file to the same column. At the same time change the wrapping of CFG_2 register write in the probe function to be uniform with the other calls. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-08ASoC: tas2552: Correct Boost Auto-Pass Through Control register usagePeter Ujfalusi
Correct the bit definition so the code will change the bits what it supposed to change. Also rename the register define to TAS2552_BOOST_APT_CTRL. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-08ASoC: tas2552: Correct Output Data register usagePeter Ujfalusi
Do not write to DOUT Tristate register at probe time, specially not write data which is defined to be used in Output Data Register. Fix the defines for the Output Data Register and correct the register write at probe time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-02-28 19:03:16 +0000