summaryrefslogtreecommitdiff
path: root/sound/soc/sh/rcar/mix.c
AgeCommit message (Collapse)Author
2022-09-02ASoC: rsnd: Add check for rsnd_mod_power_onJiasheng Jiang
As rsnd_mod_power_on() can return negative numbers, it should be better to check the return value and deal with the exception. Fixes: e7d850dd10f4 ("ASoC: rsnd: use mod base common method on SSI-parent") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20220902013030.3691266-1-jiasheng@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-27ASoC: rsnd: add debugfs supportKuninori Morimoto
Current rsnd supports #define DEBUG, but it is not helpful if issue happen after 4-5 hours. This patch adds debugfs support for it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Message-Id: <87y2c0lwyn.wl-kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-05ASoC: rsnd: move .get_status under rsnd_mod_opsKuninori Morimoto
Each mod needs to have .get_status, but current driver is handling it under rsnd_mod, instead of rsnd_mod_ops. It is not any make sence. This patch moves it to rsnd_mod_ops, and tidyup its parameter order to align to other callback functions. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-18ASoC: rsnd: convert to SPDX identifiersKuninori Morimoto
Tidyup incoherence between MODULE_LICENSE and header license, too Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2017-10-11ASoC: rsnd: add rsnd_kctrl_xxx() macroKuninori Morimoto
Current CTU/MIX/DVC are directly using rsnd_kctrl_cfg_m/s to control val etc, but it is difficult to read/understand. And there was no uniformity in access method. This patch adds new rsnd_kctrl_xxx() and implements uniformed access method. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-04ASoC: rsnd: add MIX Volume Ramp supportKuninori Morimoto
Both DVC/MIX have Volume Ramp Control. This patch supprts MIX Volume Ramp. One note is that main purpose of MIX Volume Ramp is to reduce noise, thus, MIX Ramp range is very few if you compare to DVC Volume Ramp (DVC = 5bit, MIX = 4bit). You can use MIX Volume Ranp like below amixer set "MIX Ramp Up Rate" "0.125 dB/1 step" amixer set "MIX Ramp Down Rate" "0.125 dB/1 step" amixer set "MIX Ramp" on aplay xxx.wav & amixer set "MIX",0 80% // DAI0 Volume Down amixer set "MIX",1 100% // DAI1 Volume Up Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-17ASoC: rsnd: add missing of_node_putJulia Lawall
for_each_child_of_node performs an of_node_get on each iteration, so a jump out of the loop requires an of_node_put. The semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ local idexpression n; expression e,e1; identifier l; @@ for_each_child_of_node(e1,n) { ... ( of_node_put(n); | e = n | + of_node_put(n); ? goto l; ) ... } ... l: ... when != n // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-05ASoC: rsnd: add rsnd_runtime_channel_xxx()Kuninori Morimoto
Current SSI is supporting Normal SSI/Multi mode SSI/TDM mode SSI and its behavior is based on input channels. This input channel might be converted by CTU, and SSI needs to be Multi SSI mode / TDM SSI mode if 6ch input EX) 6ch input, CTU for 2ch, playback 6ch 6ch 2ch 2ch 2ch 2ch -> SRC -> CTU -> MIX -> DVC -> SSIU -> SSI EX) 6ch input, no CTU, Multi SSI, playback 6ch 6ch 6ch 6ch 6ch 2ch -> SRC -> CTU -> MIX -> DVC -> SSIU -> SSI0/SSI1/SSI2 Current driver is using rsnd_get_adinr_chan() / rsnd_get_slot_width() for this purpose, but it is complicated enough without meaning. This patch adds new rsnd_runtime_channel_xxx() which is caring CTU/Multi SSI. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-22ASoC: rsnd: each mod has status again for CTU/MUX supportKuninori Morimoto
SSI will be used as normal SSI or as clock parent SSI. Therefor, rsnd driver wants to control SSI and parent SSI separately. Otherwise it can't use Playback/Capture in the same time. And it has been done by c2dc47d5cf("ASoC: rsnd: rsnd_dai_stream has each mod's status insted of rsnd_mod") before. OTOH, rsnd driver doesn't want to control CTU/MUX/DVC/SSIU/SSI in separately. Otherwise, these will be re-initialized during playing if MUX merges 2 sounds. Because of these picky reasons, this patch re-defines status on each mod, and add new parent_ssi_status on rsnd_dai_stream. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-15rcar: mux: Avoid use of ret uninitialisedMark Brown
We use ret as the return value from the rsnd_mix_probe() but if there are no child nodes and no errors then we will never initialize ret leading to build warnings. Ensure ret is initialized before we iterate over the child nodes to avoid this. Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-30ASoC: rsnd: mix: add rsnd_mix_halt()Kuninori Morimoto
Based on datasheet process Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-30ASoC: rsnd: mix: rename rsnd_mix_soft_reset() to rsnd_mix_activation()Kuninori Morimoto
Based on datasheet naming Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-18ASoC: rsnd: remove struct platform_device from probe/remove parameterKuninori Morimoto
Current Renesas sound driver requests struct platform_device on probe/remove for each modules. But driver can get it by rsnd_priv_to_pdev(). This patch removes unnecessary parameter Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-18ASoC: rsnd: remove struct rsnd_of_dataKuninori Morimoto
No board is using Renesas sound driver via platform boot now. This means all user is using DT boot. Platform boot support is no longer needed. But, it strongly depends on platform boot style. Now, platform boot style was removed from driver. This is cleanup patch, and remove pointless struct rsnd_of_data Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-18ASoC: rsnd: remove platform boot support from mix.cKuninori Morimoto
No board is using Renesas sound driver via platform boot now. This means all user is using DT boot. Platform boot support is no longer needed. But, it strongly depends on platform boot style. This patch removes platform boot support from mix.c Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-18ASoC: rsnd: remove platform boot support from core.cKuninori Morimoto
No board is using Renesas sound driver via platform boot now. This means all user is using DT boot. Platform boot support is no longer needed. But, it strongly depends on platform boot style. This patch removes platform boot support from core.c Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-16ASoC: rsnd: MIX settings matches to datasheetKuninori Morimoto
Current MIX settings order was rough. This patch makes it match to datasheet. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-16ASoC: rsnd: use mod base common method on CMDKuninori Morimoto
Renesas sound needs many devices (SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp). SSI/SRC/CTU/MIX/DVC are implemented as module. SSI parent, SSIU are implemented as part of SSI CMD is implemented as part of CTU/MIX/DVC AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC It is nice sense that these all devices are implemented as mod. This patch makes CMD mod base common method Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-22ASoC: rsnd: rename rsnd_mod_hw_start/stop to rsnd_mod_power_on/offKuninori Morimoto
rsnd_mod_hw_start/stop were unclear naming. It became rsnd_mod_power_on/off by this patch Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-16ASoC: rsnd: Gen1 probe is not errorKuninori Morimoto
Probing from Gen1 is not error. This patch fixup it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-14ASoC: rsnd: add rsnd_mod_get() macro and use itKuninori Morimoto
Renesas sound driver has SSI/SRC/DVC/CTU/MIX, and these are controlled as modules. And these module are member of each modules's private data. It used own method to get module pointer, but Let's use common method Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-17ASoC: rsnd: add MIX (Mixer) supportKuninori Morimoto
This patch adds MIX (Mixer) initial support for rsnd driver. It is assuming that this MIX is used via DPCM. This is sample code for playback. CPU0 : [MEM] -> [SRC1] -> [CTU02] -+ | +-> [MIX0] -> [DVC0] -> [SSI0] | CPU1 : [MEM] -> [SRC2] -> [CTU03] -+ sound { compatible = "renesas,rsrc-card"; ... cpu@0 { sound-dai = <&rcar_sound 0>; }; cpu@1 { sound-dai = <&rcar_sound 1>; }; codec { ... }; }; rcar_sound { ... rcar_sound,dai { dai0 { playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>; }; dai1 { playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>; }; }; }; Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2025-01-16 21:54:41 +0000