| Age | Commit message (Collapse) | Author |
|---|
|
some functions had parameter like below
xxx(..., rtd, ..., id);
This "id" is rtd->id. We don't need to have "id" on each functions
because we can get it from "rtd". Let's cleanup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87plnqb84p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current rtd has "num". It sounds/looks like size of rtd or something,
but it will be mainly used at snd_pcm_new() as "device index".
This naming is confusable. Let's rename it to "id"
Some drivers are using rtd->num, so let's keep it so far, and remove
it if all user was switched.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87zfmub85z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The soc_dai_mark_pop don't need substream, and also
substream is not used in this macro, so we can remove it.
This is detected by macro_checker.py script.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240821070815.2326534-4-lihongbo22@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dpcm_xxx flags are no longer needed.
We need to use xxx_only flags instead if needed, but
snd_soc_dai_link_set_capabilities() user adds dpcm_xxx if playback/capture
were available. Thus converting dpcm_xxx to xxx_only is not needed.
Just remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/87r0aiaahh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Bespoke trigger support was added when Linux v3.5 by this patch.
commit 07bf84aaf736781a283b1bd36eaa911453b14574
("ASoC: dpcm: Add bespoke trigger()")
test-component driver is using it, but this is because it indicates used
function for debug/trace purpose. Except test-component driver, bespoke
trigger has never been used over 10 years in upstream.
We can re-support it if needed in the future, but let's remove it for now,
because it just noise in upstream.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87v80ewmdi.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Returned 'struct snd_soc_pcm_stream' by snd_soc_dai_get_pcm_stream() is
not modified by the users, so it can be changed as pointer to const.
This is a necessary step towards making the 'dai->driver' a pointer to
const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240617-n-asoc-const-auto-selectable-formats-v1-5-8004f346ee38@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
get_channel_map() is supposed to obtain map of channels without
modifying the state of the given DAI, so make the pointer to 'struct
snd_soc_dai' as pointing to const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240617-n-asoc-const-auto-selectable-formats-v1-4-8004f346ee38@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Several ASoC functions receive pointers to data which is not modified,
e.g. pointers to 'snd_soc_dai', 'snd_soc_pcm_runtime',
'snd_pcm_hw_params' and 'snd_soc_dai_link'.
All these pointers can be made as a pointer to const. This makes code
safer, serves as clear annotation of function's intentions (no ownership
passed to the function, no modifications) and allows putting pointed
structures in rodata (if ever applicable).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240617-n-asoc-const-auto-selectable-formats-v1-3-8004f346ee38@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no need for implementations of DAI set_channel_map() to modify
contents of passed arrays with actual channel mapping. Additionally,
the caller keeps full ownership of the array.
Constify these pointer arguments so the code will be safer and easier to
read (documenting the caller's ownership).
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240520-asoc-x1e80100-4-channel-mapping-v4-1-f657159b4aad@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Clock direction is marked as 'unsigned int' but only two values are
currently used in practice. Note these down in the documentation.
Signed-off-by: John Watts <contact@jookia.org>
Link: https://msgid.link/r/20240326-dai_mclk_hint-v1-1-653cbd2d78d9@jookia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This was sent too late to actually make it for v6.6 but was sent against
v6.6 so merge it up here.
|
|
In some setups like Speaker amps which are very sensitive, ex: keeping them
unmute without actual data stream for very short duration results in a
static charge and results in pop and clicks. To minimize this, provide a way
to mute and unmute such codecs during trigger callbacks.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231027105747.32450-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pm2op8ua.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_dai_driver has .ops for call back functions (A), but it also
has other call back functions (B). It is duplicated and confusable.
struct snd_soc_dai_driver {
...
^ int (*probe)(...);
| int (*remove)(...);
(B) int (*compress_new)(...);
| int (*pcm_new)(...);
v ...
(A) const struct snd_soc_dai_ops *ops;
...
}
This patch merges (B) into (A).
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v8dpb0w6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
PCM audio ops may be called when the stream is not supported.
We should not call the ops in that case to avoid unexpected behavior.
hw_params is handled already in soc-pcm.c
[0] https://lore.kernel.org/alsa-devel/ae06b00a-f3f7-f9d1-0b58-4d71f3394416@linux.intel.com/T/#t
Signed-off-by: Peter Suti <peter.suti@streamunlimited.com>
Link: https://lore.kernel.org/r/20230713095258.3393827-1-peter.suti@streamunlimited.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dai->probed is used at snd_soc_pcm_dai_probe/remove(),
and used to call real remove() function only when it was probed.
int snd_soc_pcm_dai_probe(...)
{
...
for_each_rtd_dais(rtd, i, dai) {
...
if (dai->driver->probe) {
(A) int ret = dai->driver->probe(dai);
if (ret < 0)
return soc_dai_ret(dai, ret);
}
=> dai->probed = 1;
}
...
}
int snd_soc_pcm_dai_remove(...)
{
...
for_each_rtd_dais(rtd, i, dai) {
...
=> if (dai->probed &&
...) {
...
}
=> dai->probed = 0;
}
...
}
But on probe() case, we need to check dai->probed before calling
real probe() function at (A), otherwise real probe() might be called
multi times (but real remove() will be called only once).
This patch checks it at probe().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wn3u64e6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current snd_soc_dai has data for Playback/Capture, but it is very
random. Someone is array (A), someone is playback/capture (B),
and someone is tx/rx (C);
struct snd_soc_dai {
...
(A) unsigned int stream_active[SNDRV_PCM_STREAM_LAST + 1];
(B) struct snd_soc_dapm_widget *playback_widget;
(B) struct snd_soc_dapm_widget *capture_widget;
(B) void *playback_dma_data;
(B) void *capture_dma_data;
...
(C) unsigned int tx_mask;
(C) unsigned int rx_mask;
};
Because of it, the code was very complicated.
This patch creates new data structure to merge these into one,
and tidyup the code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/87cz6vea1v.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current ASoC has many helper function.
This patch use it.
Link: https://lore.kernel.org/all/6f047ec5-4055-761d-c1ea-c2d0b606e53a@linux.intel.com/
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h6w7ea2a.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For a BE link snd_soc_link_be_hw_params_fixup() is called by
dpcm_be_dai_hw_params() to initialize the params before it passes them
to __soc_pcm_hw_params(). Then __soc_pcm_hw_params() refines params to
match the BE codec and passes that to snd_soc_dai_hw_params().
The second call of snd_soc_link_be_hw_params_fixup() within
snd_soc_dai_hw_params() was overwriting the refined params with the
original BE CPU DAI params. This would then lead to various problems,
for example passing an invalid number of channels to the codec driver
hw_params(), or enabling more AIF widgets on the codec than are actually
mapped by TDM slots.
These errors may not be noticed on a simple 1:1 link between one CPU DAI
and one codec DAI, because most likely they have the same DAI config
(though this is not necessarily true, for example if the CPU end has dummy
TDM slots to achieve a desirable BCLK).
For 1:N mappings there are likely to be multiple codecs using different
subsets of the TDM slots and this overwriting of the refined params
can cause incorrect configuration of each codec on the link.
The erroneous extra call to the BE fixup function() was introduced
by:
commit a655de808cbd ("ASoC: core: Allow topology to override machine
driver FE DAI link config.")
at that time, the call to the BE fixup was already done by
dpcm_be_dai_hw_params(), which was introduced several years earlier
by:
commit 01d7584cd2e5 ("ASoC: dpcm: Add Dynamic PCM core operations.")
The erroneous code has changed and moved to a different source file
since the patch that introduced it, so this fix patch won't directly
apply as a fix on top of code older than:
commit 8b4ba1d31771 ("ASoC: soc-dai: fix up hw params only if it is
needed")
though it can be applied with some minor adjustment to code before
that patch but after:
commit aa6166c2ac28 ("ASoC: soc-dai: mv soc_dai_hw_params() to soc-dai")
On any tree older than that the code is in soc-pcm.c.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221104160252.166114-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If a 'set_bclk_ratio' call is attempted on a DAI not implementing the
method, make it an -ENOSUPP error instead of -EINVAL. Assume the DAI can
still be okay with the ratio, just does not care to register a handler.
No current in-tree users of snd_soc_dai_set_bclk_ratio seem to inspect
the return value, but -ENOSUPP disables an error print from within the
common soc_dai_ret return filter. With the new behavior a machine
driver can do a blanket 'set_bclk_ratio' on all DAIs on a bus, some of
which may care about the ratio, some of which may not.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220818165336.76403-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now the behaviour of the core and all drivers is updated to the new
direct clock specification the temporary set_fmt_new callback can be
completely removed.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220519154318.2153729-56-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The original set_fmt callback always passes clock provider/consumer
with respect to the CODEC. This made sense when the framework was
directly broken down into platforms and CODECs. Now everything is
componentised it simplifies things if each side of the link is
just told if it is provider or consumer of the clocks. To start
this migration add a new callback that can be used to receive a
direct specification of clocking. As there are more CODEC drivers
than platform drivers, we make the new flags identical to the old
CODEC flags meaning CODEC drivers will not require an update.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220519154318.2153729-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current soc_pcm_pointer() is manually calculating
both CPU-DAI's max delay (= A)
and Codec-DAI's max delay (= B).
static snd_pcm_uframes_t soc_pcm_pointer(...)
{
...
^ for_each_rtd_cpu_dais(rtd, i, cpu_dai)
(A) cpu_delay = max(cpu_delay, ...);
v delay += cpu_delay;
^ for_each_rtd_codec_dais(rtd, i, codec_dai)
(B) codec_delay = max(codec_delay, ...);
v delay += codec_delay;
runtime->delay = delay;
...
}
Current soc_pcm_pointer() and the total delay calculating
is not readable / difficult to understand.
This patch update snd_soc_dai_delay() to snd_soc_pcm_dai_delay(),
and calcule both CPU/Codec delay in one function.
Link: https://lore.kernel.org/r/87fszl4yrq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875yssy25z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch cleanups below cppcheck warning.
sound/soc/soc-dai.c:553:13: style: Variable 'ret' is assigned a value that is never used. [unreadVariable]
int i, ret = 0;
^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wnomyom1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch cleanups below cppcheck warning.
sound/soc/soc-dai.c:454:7: style: The scope of the variable 'supported_cpu' can be reduced. [variableScope]
bool supported_cpu;
^
sound/soc/soc-dai.c:455:7: style: The scope of the variable 'supported_codec' can be reduced. [variableScope]
bool supported_codec;
^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y292yom6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ASoC is using dai_link which specify DAI format (= dai_link->dai_fmt),
and it is selected by "Sound Card" driver in corrent implementation.
In other words, Sound Card *needs* to setup it.
But, it should be possible to automatically selected from CPU and
Codec driver settings.
This patch adds new .auto_selectable_formats support
at snd_soc_dai_ops.
By this patch, dai_fmt can be automatically selected from each
driver if both CPU / Codec driver had it.
Automatically selectable *field* is depends on each drivers.
For example, some driver want to select format "automatically",
but want to select other fields "manually", because of complex limitation.
Or other example, in case of both CPU and Codec are possible to be
clock provider, but the quality was different.
In these case, user need/want to *manually* select each fields
from Sound Card driver.
This .auto_selectable_formats can set priority.
For example, no limitaion format can be HI priority,
supported but has picky limitation format can be next priority, etc.
It uses Sound Card specified fields preferentially, and try to select
non-specific fields from CPU and Codec driver automatically
if all drivers have .auto_selectable_formats.
In other words, we can select all dai_fmt via Sound Card driver
same as before.
Link: https://lore.kernel.org/r/871rb3hypy.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/871racbx0w.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h7ionc8s.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If fixed hw params won't be used, fixing up isn't needed also.
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/000401d748bc$fa466d50$eed347f0$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
v5.12-rc1 flags new warnings with make W=1, fix missing or broken
function descriptors.
sound/soc/soc-dai.c:167: warning: expecting prototype for
snd_soc_xlate_tdm_slot(). Prototype was for
snd_soc_xlate_tdm_slot_mask() instead
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210301174659.117122-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
soc_pcm_trigger() calls DAI/Component/Link trigger,
but some of them might be failed.
static int soc_pcm_trigger(...)
{
...
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
ret = snd_soc_link_trigger(substream, cmd);
if (ret < 0)
break;
(*) ret = snd_soc_pcm_component_trigger(substream, cmd);
if (ret < 0)
break;
ret = snd_soc_pcm_dai_trigger(substream, cmd);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
ret = snd_soc_pcm_dai_trigger(substream, cmd);
if (ret < 0)
break;
ret = snd_soc_pcm_component_trigger(substream, cmd);
if (ret < 0)
break;
ret = snd_soc_link_trigger(substream, cmd);
break;
}
...
}
For example, if soc_pcm_trigger() failed at (*) point,
we need to rollback previous succeeded trigger.
This patch adds trigger mark for DAI/Component/Link,
and do STOP if START/RESUME/PAUSE_RELEASE were failed.
Because it need to use new rollback parameter,
we need to modify DAI/Component/Link trigger functions in the same time.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6uycssd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
soc_compr_open() does rollback when failed (A),
but, it is almost same as soc_compr_free().
static int soc_compr_open(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return 0;
^ machine_err:
| ...
| out:
(A) ...
| pm_err:
| ...
v return ret;
}
The difference is
soc_compr_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_compr_free() and rollback.
=> 1) snd_soc_dai_compr_startup/shutdown()
2) snd_soc_component_compr_open/free()
3) snd_soc_link_compr_startup/shutdown()
This patch is for 1) snd_soc_dai_compr_startup/shutdown(),
and adds new cstream mark.
It will mark cstream when startup() was suceeded.
If rollback happen *after* that, it will check rollback flag
and marked cstream.
It cares *previous* startup() only now,
but we might want to check *whole* marked cstream in the future.
This patch is using macro so that it can be easily adjust to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87mtze5iwp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
soc_pcm_hw_params() does rollback when failed (A),
but, it is almost same as soc_pcm_hw_free().
static int soc_pcm_hw_params(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return ret;
^ component_err:
| ...
| interface_err:
(A) ...
| codec_err:
| ...
v return ret;
}
The difference is
soc_pcm_hw_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_pcm_hw_free() and rollback.
Now, soc_pcm_hw_params/free() are handling
1) snd_soc_link_hw_params/free()
2) snd_soc_pcm_component_hw_params/free()
=> 3) snd_soc_dai_hw_params/free()
This patch is for 3) snd_soc_dai_hw_params/free().
The idea of having bit-flag or counter is not enough for this purpose.
For example if one DAI is used for 2xPlaybacks for some reasons,
and if 1st Playback was succeeded but 2nd Playback was failed,
2nd Playback rollback doesn't need to call shutdown.
But it has succeeded bit-flag or counter via 1st Playback,
thus, 2nd Playback rollback will call unneeded shutdown.
And 1st Playback's necessary shutdown will not be called,
because bit-flag or counter was cleared by wrong 2nd Playback rollback.
To avoid such case, this patch marks substream pointer when hw_params() was
succeeded. If rollback needed, it will check rollback flag and marked
substream pointer.
One note here is that it cares *previous* hw_params() only now,
but we might want to check *whole* marked substream in the future.
This patch is using macro named "push/pop", so that it can be easily
update.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87imbxgqai.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
soc_pcm_open() does rollback when failed (A),
but, it is almost same as soc_pcm_close().
static int soc_pcm_open(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return 0;
^ config_err:
| ...
| rtd_startup_err:
(A) ...
| component_err:
| ...
v return ret;
}
The difference is
soc_pcm_close() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_pcm_close() and rollback.
Now, soc_pcm_open/close() are handling
=> 1) snd_soc_dai_startup/shutdown()
2) snd_soc_link_startup/shutdown()
3) snd_soc_component_module_get/put()
4) snd_soc_component_open/close()
5) pm_runtime_put/get()
This patch is for 1) snd_soc_dai_startup/shutdown().
The idea of having bit-flag or counter is not enough for this purpose.
For example if one DAI is used for 2xPlaybacks for some reasons,
and if 1st Playback was succeeded but 2nd Playback was failed,
2nd Playback rollback doesn't need to call shutdown.
But it has succeeded bit-flag or counter via 1st Playback,
thus, 2nd Playback rollback will call unneeded shutdown.
And 1st Playback's necessary shutdown will not be called,
because bit-flag or counter was cleared by wrong 2nd Playback rollback.
To avoid such case, this patch marks substream pointer when startup() was
succeeded. If rollback needed, it will check rollback flag and marked
substream pointer.
One note here is that it cares *current* startup() only now.
but we might want to check *whole* marked substream in the future.
This patch is using macro named "push/pop", so that it can be easily
update.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lfgubwoc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
commit 25612477d20b52 ("ASoC: soc-dai: set dai_link dpcm_ flags with a helper")
added snd_soc_dai_link_set_capabilities().
But it is using snd_soc_find_dai() (A) which is required client_mutex (B).
And client_mutex is soc-core.c local.
struct snd_soc_dai *snd_soc_find_dai(xxx)
{
...
(B) lockdep_assert_held(&client_mutex);
...
}
void snd_soc_dai_link_set_capabilities(xxx)
{
...
for_each_pcm_streams(direction) {
...
for_each_link_cpus(dai_link, i, cpu) {
(A) dai = snd_soc_find_dai(cpu);
...
}
...
for_each_link_codecs(dai_link, i, codec) {
(A) dai = snd_soc_find_dai(codec);
...
}
}
...
}
Because of these background, we will get WARNING if .config has CONFIG_LOCKDEP.
WARNING: CPU: 2 PID: 53 at sound/soc/soc-core.c:814 snd_soc_find_dai+0xf8/0x100
CPU: 2 PID: 53 Comm: kworker/2:1 Not tainted 5.7.0-rc1+ #328
Hardware name: Renesas H3ULCB Kingfisher board based on r8a77951 (DT)
Workqueue: events deferred_probe_work_func
pstate: 60000005 (nZCv daif -PAN -UAO)
pc : snd_soc_find_dai+0xf8/0x100
lr : snd_soc_find_dai+0xf4/0x100
...
Call trace:
snd_soc_find_dai+0xf8/0x100
snd_soc_dai_link_set_capabilities+0xa0/0x16c
graph_dai_link_of_dpcm+0x390/0x3c0
graph_for_each_link+0x134/0x200
graph_probe+0x144/0x230
platform_drv_probe+0x5c/0xb0
really_probe+0xe4/0x430
driver_probe_device+0x60/0xf4
snd_soc_find_dai() will be used from (X) CPU/Codec/Platform driver with
mutex lock, and (Y) Card driver without mutex lock.
This snd_soc_dai_link_set_capabilities() is for Card driver,
this means called without mutex.
This patch adds snd_soc_find_dai_with_mutex() to solve it.
Fixes: 25612477d20b52 ("ASoC: soc-dai: set dai_link dpcm_ flags with a helper")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blixvuab.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
Previous updates to set dailink capabilities and check dailink
capabilities were based on a flawed assumption that all dais support
the same capabilities as the dailink. This is true for TDM
configurations but existing configurations use an amplifier and a
capture device on the same dailink, and the tests would prevent the
card from probing.
This patch modifies the snd_soc_dai_link_set_capabilities()
helper so that the dpcm_playback (resp. dpcm_capture) dailink
capabilities are set if at least one dai supports playback (resp. capture).
Likewise the checks are modified so that an error is reported only
when dpcm_playback (resp. dpcm_capture) is set but none of the CPU
DAIs support playback (resp. capture).
Fixes: 25612477d20b5 ('ASoC: soc-dai: set dai_link dpcm_ flags with a helper')
Fixes: b73287f0b0745 ('ASoC: soc-pcm: dpcm: fix playback/capture checks')
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200723180533.220312-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current soc-xxx are getting rtd from substream by
rtd = substream->private_data;
But, getting data from "private_data" is very unclear.
This patch adds asoc_substream_to_rtd() macro which is
easy to understand that rtd from substream.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wo2z0yve.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Bossart <pierre-louis.bossart@linux.intel.com>:
Small patchset to harden the SoundWire machine driver, change bad
HIDs, update PLL settings and avoid memory leaks. Given that the
SoundWire core parts are not upstream it's probably not necessary to
provide the patches to stable branches.
Bard Liao (1):
ASoC: Intel: sof_sdw_rt711: remove hard-coded codec name
Kai Vehmanen (2):
ASoC: Intel: sof_sdw: add support for systems without i915 audio
ASoC: Intel: sof_sdw: avoid crash if invalid DSP topology loaded
Libin Yang (1):
ASoC: Intel: common: change match table ehl-rt5660
Pierre-Louis Bossart (1):
ASoC: Intel: sof_sdw_rt711: remove properties in card remove
Yong Zhi (1):
ASoC: intel: board: sof_rt5682: Update rt1015 pll input clk freq
sound/soc/intel/boards/sof_rt5682.c | 9 +++++-
sound/soc/intel/boards/sof_sdw.c | 31 +++++++++++++------
sound/soc/intel/boards/sof_sdw_common.h | 2 ++
sound/soc/intel/boards/sof_sdw_hdmi.c | 6 ++++
sound/soc/intel/boards/sof_sdw_rt711.c | 17 +++++++++-
.../intel/common/soc-acpi-intel-ehl-match.c | 2 +-
6 files changed, 54 insertions(+), 13 deletions(-)
base-commit: 22e9b54307987787efa0ee534aa9e31982ec1161
--
2.25.1
|
|
All drivers are now using .mute_stream.
Let's remove .digital_mute.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/87h7u72dqz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling "direction".
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
To prepare merging mute_stream()/digital_mute(),
this patch adds .no_capture_mute support to emulate .digital_mute().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87eeplxxj7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a helper to walk through all the DAIs and set dpcm_playback and
dpcm_capture flags based on the DAIs capabilities, and use this helper
to avoid setting these flags arbitrarily in generic cards.
The commit referenced in the Fixes tag did not introduce the
configuration issue but will prevent the card from probing when
detecting invalid configurations.
Fixes: b73287f0b0745 ('ASoC: soc-pcm: dpcm: fix playback/capture checks')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200707210439.115300-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Recent changes result in multiple dmesg traces such as:
[ 14.410435] Audio Port: ASoC: error at snd_soc_link_startup on Audio
Port: 1
[ 14.410446] sst-mfld-platform sst-mfld-platform: ASoC: error at
snd_soc_dai_startup on media-cpu-dai: 1
These messages are not really errors, when dai and dai-link callbacks
return the value of e.g. snd_pcm_hw_constraint_single() the result is
"Positive if the value is changed, zero if it's not changed, or a
negative error code"
Add a simple test to skip the checks for positive returned values
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200529123613.13447-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dai_link related function should be implemented at soc-link.c.
This patch adds snd_soc_link_be_hw_params_fixup().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87wo503k73.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
No one is using dai->active, snd_soc_component_is_active().
Let's remove these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87imgy58hp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/874ksi6n48.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/875zcy6n4d.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current snd_soc_dai_action() is updating
dai->stream_active for Playback/Capture (A),
dai->active for DAI (B)
void snd_soc_dai_action(struct snd_soc_dai *dai,
int stream, int action)
{
(A) dai->stream_active[stream] += action;
(B) dai->active += action;
dai->component->active += action;
}
But, these are very verbose, because we can calculate
DAI active from stream_active.
This patch adds snd_soc_dai_active() which calculate
DAI active from DAI stream_active.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/877dxe6n4i.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_runtime_action() updates DAI's xxx_active.
We should update these in the same time, and
it can be implemented at soc-dai.c.
This patch adds snd_soc_dai_action() for it.
This is prepare for xxx_active cleanup.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87a72a6n4s.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_get_metadata().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87eesdssi8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_set_metadata().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87ftctssid.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_pointer().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87h7x9ssii.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
