summaryrefslogtreecommitdiff
path: root/sound/soc
AgeCommit message (Collapse)Author
2011-02-13Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-02-13ASoC: Warn if WM8903 platform data is used to enable microphone IRQMark Brown
The WM8903 interrupts are clear on read so if the WM8903 detection is enabled from platform data when the IRQ is in use (rather than using a direct signal from a GPIO) status may be lost during startup. Help users spot this misconfiguration by adding a WARN_ON(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-13ASoC: Tegra: Add MODULE_ALIASStephen Warren
With the appropriate MODULE_ALIAS in place, the audio modules will be automatically loaded; there is no longer a need for manual modprobes. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-13ASoC: Tegra: Harmony: Explicitly set mic enablesStephen Warren
Harmony has both an external mic (a regular mic jack) and an internal mic (a 0.1" two-pin header on the board). The external mic is connected to the WM8903's IN1L pin, and is supported by the current driver. The internal mic is connected to the WM8903's IN1R pin, and is not supported by the current driver. It appears that no Harmony systems were shipped with any internal mic connected; users were expected to provide their own. This makes the internal mic connection less interesting. The WM8903's Mic Bias signal is used for both of these mics. For each mic, a GPIO drives a transistor which gates whether the mic bias signal is actively connected to that mic, or isolated from it. The dual use of the mic bias for both mics makes a general-purpose complete implementation of mic detection using the mic bias complex. So, for simplicity, the internal mic is currently ignored by the driver. This patch configures the relevant GPIOs to enable the mic bias connection to the external mic, and disable the mic bias connection to the internal mic. Note that in practice, this is the default state if these GPIOs aren't configured. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-13ASoC: Harmony: Call snd_soc_dapm_nc_pinStephen Warren
Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-13ASoC: Tegra: Harmony: Implement mic detectionStephen Warren
* Add jack definition for mic jack * Request wm8903 to enable mic detection * Force mic bias on, since it's required for mic detection Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-13ASoC: Ensure supplies are maintained for force enabled widgetsMark Brown
If a widget has been force enabled then not only do we need to keep the widget itself enabled, we also need to keep any supplies the widget requires enabled. The user could force all the individual widgets on but this requires too much knowledge of device internals. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-13ASoC: WM8994: Improve playback robustnessDimitris Papastamos
On WM8994 revision D and earlier ensure proper playback robustness as some rare use cases can trigger issues. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-02-13ASoC: WM8994: Improve robustness in some use casesDimitris Papastamos
Ensure that on disabling certain registers such as AIF1DAC1L, AIF1DAC1R etc. the AIF1CLK and AIF2CLK remain enabled. Similarly when enabling those registers, AIF1CLK and AIF2CLK will remain disabled. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-02-13ASoC: WM8903: Fix mic detection enable logicStephen Warren
The mic detection HW should be enabled when either mic or short detection is required, not when only both are required. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-02-11ASoC: Allow use sleeping gpio in soc-jackJarkko Nikula
It is safe to use sleeping gpio in snd_soc_jack_gpio_detect as it is not called from interrupt context. This avoids WARN_ON from __gpio_get_value if sleeping gpio is registered for jack. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-11ASoC: mid-x86: Use the soc-jack apis for jack type detectionVinod Koul
This patch modifies the mfld_machine to use the new jack apis for adding the voltage zones for jack type detection. It also modifed TI sn95031 codec driver to use these new apis Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Harsha Priya <priya.harsha@intel.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-11Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-02-11ASoC: Use explicit sequence for WM8903 bias offMark Brown
This makes no real difference compared to the write sequencer sequence that was previously used but can run without a clock being provided. Also remove the write sequencer support code as this was the last use of it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-11ASoC: Don't use write sequencer to power up WM8903Mark Brown
The write sequencer sequencer sequence takes longer than is desirable as it brings up a full playback path which is not required at this point. Open coding the sequence cuts the startup time by two thirds. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-11ASoC: Convert WM8903 bias management to use snd_soc_update_bits()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-11ASoC: CX20442: fix wrong reg_cache_default contentJanusz Krzysztofik
Content of the CX20442's snd_soc_codec_driver.reg_cache_default pointed area, introduced with my recent NULL pointer dereferece fix (commit f019ee5feb344ff0b22b58df4568676295aae14f), occured wrong after further testing, more thorough than just booting successfully. There are two problems with it: 1) It should read (1 << CX20442_TELOUT) | (1 << CX20442_MIC), not CX20442_TELOUT | CX20442_MIC. 2) While correctly matching actual codec hardware state on boot when fixed per 1), a few more code modifications would still be required to reflect that state not only into register cache, but also force them into DAPM pins state, otherwise an inconsitency occures which may prevent further codec state changes from being applied correctly. As a result, the phone stops ringing after reboot, until someone picks up the handset for the first time. Revert that reg_cache_default content to a working, previous de facto default value of 0, in hope this change can still be accepted as an rc cycle fix. Created and tested against linux-2.6.38-rc4 Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-10ASoC: Actively manage WM8903 DC servo configurationMark Brown
Explicitly cache the DC servo offsets for digital paths in the driver, allowing them to be preserved over suspend and resume, and ensure that we recalibrate analogue outputs paths when they are in use so that we cover any changes in the input offset. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-09ASoC: add support for multiple jack typesVinod Koul
This patch adds soc-jack support for adding voltage zones and for detecting jack type Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Harsha Priya <priya.harsha@intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-09Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-02-09ASoC: Sync initial widget state with hardwareMark Brown
ASoC generally uses the register defaults for everything, but in some cases the hardware will default to enabling some of the DAPM widgets (clocks for example). Ensure that DAPM knows about the actual widget state at initialisation by reading the enable bits after instantiating the widgets so they don't get left enabled needlessly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-09ASoC: Fix WM8903 DAC mute defaultMark Brown
The WM8903 register map does not mute the DAC by default at startup so we need to explicitly do so. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-09ASoC: Dynamically manage CLK_SYS in WM8903Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-09ASoC: Convert WM8903 to use PGA_S for output stage enablesMark Brown
This simplfies the code and slightly reduces the startup time. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-09ASoC: Add support for AIF channel muxing on WM8903Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-09ASoC: Display WM8903 chip revision alphabeticallyMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-09ASoC: Remove redundant -codec from WM8903 driver nameMark Brown
It causes noisy -codecs to appear in things like .codec_name. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-09ASoC: Davinci: Replace usage of IO_ADDRESS with ioremap()Vaibhav Bedia
This patch modifies the Davinci i2s and mcasp drivers to make use of ioremap() instead of IO_ADDRESS() Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-09ASoC: Davinci: Call clk_disable() and clk_put() in case of errorVaibhav Bedia
In case of any error in probe() function, clk_disable() and clk_put() should be called if clk_enable() and clk_get() went through. Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-09ASoC: Davinci: Use resource_size() helper functionVaibhav Bedia
This patch modifies the Davinci i2s and mcasp drivers to make use of the resource_size() helper function for readability. Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-09ASoC: sn95031: Add support for reading mic biasVinod Koul
This patch adds support to read the mic bias voltage when a jack is inserted. It uses ADC to measure. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Harsha Priya <priya.harsha@intel.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-09ASoC: mfld_machine: Add support for jack detectionVinod Koul
This patch adds support for registering jack interupt and registering jack with core Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Harsha Priya <priya.harsha@intel.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-09ASoC: sn95031: Add jack support in the codecVinod Koul
This patch adds support for jack detection and reporting in the codec It however is not fully functional as it doesn't measure adc to figure out what got inserted which will be added later Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Harsha Priya <priya.harsha@intel.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-09ASoC: Tegra: Harmony: Add switch control for speakerStephen Warren
Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-09ASoC: Tegra: Harmony: Add headphone jack detectionStephen Warren
Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-08ASoC: soc-cache: dereferencing before checkingDan Carpenter
The patch c358e640a66 "ASoC: soc-cache: Add trace event for snd_soc_cache_sync()" introduced a dereference of "codec->cache_ops" before we had checked it for NULL. I pulled the check forward, and then pulled everything in an indent level. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-08ASoC: CS4271: Move Chip Select control out of the CODEC code.Alexander Sverdlin
Move Chip Select control out of the CODEC code for CS4271. Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-07ASoC: codecs: wm8753: Fix DAI mode switchingLars-Peter Clausen
The wm8753 codec supports switching between different DAI modes. The current drivers tries to implement this by changing the DAI driver at runtime. But to properly work this would require support from the ASoC core. So this patch takes a different approch on how the DAI mode switching is implemented. The only difference, from a driver point of view, between the different DAI modes is how to program the DAI format to the hardware. So what this patch is, it stores the current format for each DAI in the drivers private struct and when the DAI mode is changed the format gets simply reprogrammed according to the new DAI mode. Futhermore this patch restricts the changing of the DAI format to when the codec is inactive. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-07ASoC: mid-x86: Fix dependency on intel_sst driverVinod Koul
Enabling medfield asoc driver causes compliation error when intel_sst is not selected ERROR: "register_sst_card" [sound/soc/mid-x86/snd-soc-sst-platform.ko] undefined! This patch puts proper dependency to elimate build error Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Harsha Priya <priya.harsha@intel.com> Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-04ASoC: ep93xx-ac97: remove extra empty lineMika Westerberg
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-03Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-02-03ASoC: Improve WM8994 digital power sequencingMark Brown
On WM8994 revision D and earlier ensure optimal sequencing with simultaneous usage of AIF1 and AIF2 by tying the signals together so if paths through both are connected the streams are started simultaneously. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
2011-02-03ASoC: Create an AIF1ADCDAT signal widget to match AIF2Mark Brown
Due to the different routing for AIF1 and AIF2 we weren't using a single widget to represent the ADCDAT signal. For consistency add one. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
2011-02-03asoc: davinci: da830/omap-l137: correct cpu_dai_nameVaibhav Bedia
McASP1 is used on the DA830/OMAP-L137 platform for the codec. This is different from the DA850/OMAP-L138 platform which uses McASP0. This is fixed by adding a new snd_soc_dai_link struct. Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-03ASoC: Sort ALC5623 in Kconfig and MakefileMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-02Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-02-02ASoC: fill in snd_soc_pcm_runtime.card before calling snd_soc_dai_link.init()Janusz Krzysztofik
The .card member of the snd_soc_pcm_runtime structure pointed to by the snd_soc_dai_link.init() argument used to be initialized before the function being called. This has changed, probably unintentionally, after recent refactorings. Since the function implementations are free to make use of this pointer, move its assignment back before the function is called to avoid NULL pointer dereferences. Created and tested on Amstrad Delta againts linux-2.6.38-rc2 Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-02ASoC: soc-core: Support debugfs entries larger than PAGE_SIZE bytesDimitris Papastamos
For some codecs with large register maps, it was not possible to dump all registers via the codec_reg file but only up to PAGE_SIZE bytes. This patch fixes this problem. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-02ASoC: PXA: formattingSven Neumann
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-02ASoC: Update PM ifdefs for exported suspend/resumeMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-02-19 04:22:45 +0000