| Age | Commit message (Collapse) | Author |
|---|
|
Replace a comma between expression statements by a semicolon.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240716073405.968801-1-nichen@iscas.ac.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Update JSON/events for power10 platform with additional events.
Also move PM_VECTOR_LD_CMPL event from others.json to frontend.json
file.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: hbathini@linux.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20240723052154.96202-1-kjain@linux.ibm.com
[ Remove alternative to ' char that made the build break in some distros with a unicode parsing python error ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
instruction
Since the "ins.name" is not set while using raw instruction,
'perf annotate' with insn-stat gives wrong data:
Result from "./perf annotate --data-type --insn-stat":
Annotate Instruction stats
total 615, ok 419 (68.1%), bad 196 (31.9%)
Name : Good Bad
-----------------------------------------------------------
: 419 196
This patch sets "dl->ins.name" in arch specific function
"check_ppc_insn" while initialising "struct disasm_line".
Also update "ins_find" function to pass "struct disasm_line" as a
parameter so as to set its name field in arch specific call.
With the patch changes:
Annotate Instruction stats
total 609, ok 446 (73.2%), bad 163 (26.8%)
Name/opcode : Good Bad
-----------------------------------------------------------
58 : 323 80
32 : 49 43
34 : 33 11
OP_31_XOP_LDX : 8 20
40 : 23 0
OP_31_XOP_LWARX : 5 1
OP_31_XOP_LWZX : 2 3
OP_31_XOP_LDARX : 3 0
33 : 0 2
OP_31_XOP_LBZX : 0 1
OP_31_XOP_LWAX : 0 1
OP_31_XOP_LHZX : 0 1
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-16-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now perf uses the capstone library to disassemble the instructions in
x86. capstone is used (if available) for perf annotate to speed up.
Currently it only supports x86 architecture.
This patch includes changes to enable this in powerpc.
For now, only for data type sort keys, this method is used and only
binary code (raw instruction) is read. This is because powerpc approach
to understand instructions and reg fields uses raw instruction.
The "cs_disasm" is currently not enabled. While attempting to do
cs_disasm, observation is that some of the instructions were not
identified (ex: extswsli, maddld) and it had to fallback to use objdump.
Hence enabling "cs_disasm" is added in comment section as a TODO for
powerpc.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-15-atrajeev@linux.vnet.ibm.com
[ Use dso__nsinfo(dso) as required to match EXTRA_CFLAGS=-DREFCNT_CHECKING=1 build expectations ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
capstone_init is made availbale for all archs to use and updated to
enable support for CS_ARCH_PPC as well. Patch removes
open_capstone_handle and uses capstone_init in all the places.
Committer notes:
Avoid including capstone/capstone.h from print_insn.h to not break the
build in builtin-script.c due to the namespace clash with libbpf:
/usr/include/capstone/bpf.h:94:14: error: 'bpf_insn' defined as wrong kind of tag
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-14-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
symbol disassemble
symbol__disassemble_capstone in util/disasm.c calls function
open_capstone_handle to open/init the capstone.
We already have a capstone_init function in "util/print_insn.c". But
capstone_init is defined as a static function in util/print_insn.c.
Change this and also add the function in print_insn.h
The open_capstone_handle checks the disassembler_style option from
annotation_options to decide whether to set CS_OPT_SYNTAX_ATT.
Add that logic in capstone_init also and by default set it to true.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-13-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add instruction tracking function "update_insn_state_powerpc" for
powerpc. Example sequence in powerpc:
ld r10,264(r3)
mr r31,r3
<<after some sequence>
ld r9,312(r31)
Consider ithe sample is pointing to: "ld r9,312(r31)".
Here the memory reference is hit at "312(r31)" where 312 is the offset
and r31 is the source register.
Previous instruction sequence shows that register state of r3 is moved
to r31.
So to identify the data type for r31 access, the previous instruction
("mr") needs to be tracked and the state type entry has to be updated.
Current instruction tracking support in perf tools infrastructure is
specific to x86. Patch adds this support for powerpc as well.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-12-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add few more instructions and use opcode as search key
to find if it is supported by the architecture.
The added ones are: addi, addic, addic., addis, subfic and mulli
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-11-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
instruction tracking in powerpc
Data-type profiling has the concept of instruction tracking.
Example sequence in powerpc:
ld r10,264(r3)
mr r31,r3
<<after some sequence>
ld r9,312(r31)
or differently
lwz r10,264(r3)
add r31, r3, RB
lwz r9, 0(r31)
If a sample is hit at "lwz r9, 0(r31)", data type of r31 depends
on previous instruction sequence here. So to track the previous
instructions, patch adds changes to identify some of the arithmetic
instructions which are having opcode as 31.
Since memory instructions also has cases with opcode 31, use the bits
22:30 to filter the arithmetic instructions here.
Also there are instructions with just two operands like "addme", "addze".
This patch adds new instructions ops "arithmetic_ops" to handle this
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-10-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
powerpc
There are memory instructions in powerpc with opcode as 31.
Example: "ldx RT,RA,RB" , Its X form is as below:
______________________________________
| 31 | RT | RA | RB | 21 |/|
--------------------------------------
0 6 11 16 21 30 31
The opcode for "ldx" is 31. There are other instructions also with
opcode 31 which are memory insn like ldux, stbx, lwzx, lhaux
But all instructions with opcode 31 are not memory. Example is add
instruction: "add RT,RA,RB"
The value in bit 21-30 [ 21 for ldx ] is different for these
instructions. Patch uses this value to assign instruction ops for these
cases. The naming convention and value to identify these are picked from
defines in "arch/powerpc/include/asm/ppc-opcode.h"
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-9-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use the raw instruction code and macros to identify memory instructions,
extract register fields and also offset.
The implementation addresses the D-form, X-form, DS-form instructions.
Two main functions are added.
New parse function "load_store__parse" as instruction ops parser for
memory instructions.
Unlike other parsers (like mov__parse), this one fills in the
"multi_regs" field for source/target and new added "mem_ref" field. No
other fields are set because, here there is no need to parse the
disassembled code and arch specific macros will take care of extracting
offset and regs which is easier and will be precise.
In powerpc, all instructions with a primary opcode from 32 to 63
are memory instructions. Update "ins__find" function to have "raw_insn"
also as a parameter.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-8-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
instruction on powerpc
Use the raw instruction code and macros to identify memory instructions,
extract register fields and also offset.
The implementation addresses the D-form, X-form, DS-form instructions.
Adds "mem_ref" field to check whether source/target has memory
reference.
Add function "get_powerpc_regs" which will set these fields: reg1, reg2,
offset depending of where it is source or target ops.
Update "parse" callback for "struct ins_ops" to also pass "struct
disasm_line" as argument. This is needed in parse functions where opcode
is used to determine whether to set multi_regs and other fields
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-7-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
using dso__data_read_offset utility
Add support to capture and parse raw instruction in powerpc.
Currently, the perf tool infrastructure uses two ways to disassemble
and understand the instruction. One is objdump and other option is
via libcapstone.
Currently, the perf tool infrastructure uses "--no-show-raw-insn" option
with "objdump" while disassemble. Example from powerpc with this option
for an instruction address is:
Snippet from:
objdump --start-address=<address> --stop-address=<address> -d --no-show-raw-insn -C <vmlinux>
c0000000010224b4: lwz r10,0(r9)
This line "lwz r10,0(r9)" is parsed to extract instruction name,
registers names and offset. Also to find whether there is a memory
reference in the operands, "memory_ref_char" field of objdump is used.
For x86, "(" is used as memory_ref_char to tackle instructions of the
form "mov (%rax), %rcx".
In case of powerpc, not all instructions using "(" are the only memory
instructions. Example, above instruction can also be of extended form (X
form) "lwzx r10,0,r19". Inorder to easy identify the instruction category
and extract the source/target registers, patch adds support to use raw
instruction for powerpc. Approach used is to read the raw instruction
directly from the DSO file using "dso__data_read_offset" utility which
is already implemented in perf infrastructure in "util/dso.c".
Example:
38 01 81 e8 ld r4,312(r1)
Here "38 01 81 e8" is the raw instruction representation. In powerpc,
this translates to instruction form: "ld RT,DS(RA)" and binary code
as:
| 58 | RT | RA | DS | |
-------------------------------------
0 6 11 16 30 31
Function "symbol__disassemble_dso" is updated to read raw instruction
directly from DSO using dso__data_read_offset utility. In case of
above example, this captures:
line: 38 01 81 e8
The above works well when 'perf report' is invoked with only sort keys
for data type ie type and typeoff.
Because there is no instruction level annotation needed if only data
type information is requested for.
For annotating sample, along with type and typeoff sort key, "sym" sort
key is also needed. And by default invoking just "perf report" uses sort
key "sym" that displays the symbol information.
With approach changes in powerpc which first reads DSO for raw
instruction, "perf annotate" and "perf report" + a key breaks since
it doesn't do the instruction level disassembly.
Snippet of result from 'perf report':
Samples: 1K of event 'mem-loads', 4000 Hz, Event count (approx.): 937238
do_work /usr/bin/pmlogger [Percent: local period]
Percent│ ea230010
│ 3a550010
│ 3a600000
│ 38f60001
│ 39490008
│ 42400438
51.44 │ 81290008
│ 7d485378
Here, raw instruction is displayed in the output instead of human
readable annotated form.
One way to get the appropriate data is to specify "--objdump path", by
which code annotation will be done. But the default behaviour will be
changed. To fix this breakage, check if "sym" sort key is set. If so
fallback and use the libcapstone/objdump way of disassmbling the sample.
With the changes and "perf report"
Samples: 1K of event 'mem-loads', 4000 Hz, Event count (approx.): 937238
do_work /usr/bin/pmlogger [Percent: local period]
Percent│ ld r17,16(r3)
│ addi r18,r21,16
│ li r19,0
│ 8b0: rldicl r10,r10,63,33
│ addi r10,r10,1
│ mtctr r10
│ ↓ b 8e4
│ 8c0: addi r7,r22,1
│ addi r10,r9,8
│ ↓ bdz d00
51.44 │ lwz r9,8(r9)
│ mr r8,r10
│ cmpw r20,r9
Committer notes:
Just add the extern for 'sort_order' in disasm.c so that we don't end up
breaking the build due to this type colision with capstone and libbpf:
In file included from /usr/include/capstone/capstone.h:325,
from /git/perf-6.10.0/tools/perf/util/print_insn.h:23,
from builtin-script.c:38:
/usr/include/capstone/bpf.h:94:14: error: 'bpf_insn' defined as wrong kind of tag
94 | typedef enum bpf_insn {
I reported this to the bpf mailing list, see one of the links below.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-6-atrajeev@linux.vnet.ibm.com
Link: https://lore.kernel.org/bpf/ZqOltPk9VQGgJZAA@x1/T/#u
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently, the perf tool infrastructure uses the disasm_line__parse
function to parse disassembled line.
Example snippet from objdump:
objdump --start-address=<address> --stop-address=<address> -d --no-show-raw-insn -C <vmlinux>
c0000000010224b4: lwz r10,0(r9)
This line "lwz r10,0(r9)" is parsed to extract instruction name,
registers names and offset.
In powerpc, the approach for data type profiling uses raw instruction
instead of result from objdump to identify the instruction category and
extract the source/target registers.
Example: 38 01 81 e8 ld r4,312(r1)
Here "38 01 81 e8" is the raw instruction representation. Add function
"disasm_line__parse_powerpc" to handle parsing of raw instruction.
Also update "struct disasm_line" to save the binary code/
With the change, function captures:
line -> "38 01 81 e8 ld r4,312(r1)"
raw instruction "38 01 81 e8"
Raw instruction is used later to extract the reg/offset fields. Macros
are added to extract opcode and register fields. "struct disasm_line"
is updated to carry union of "bytes" and "raw_insn" of 32 bit to carry raw
code (raw).
Function "disasm_line__parse_powerpc fills the raw instruction hex value
and can use macros to get opcode. There is no changes in existing code
paths, which parses the disassembled code. The size of raw instruction
depends on architecture.
In case of powerpc, the parsing the disasm line needs to handle cases
for reading binary code directly from DSO as well as parsing the objdump
result. Hence adding the logic into separate function instead of
updating "disasm_line__parse". The architecture using the instruction
name and present approach is not altered. Since this approach targets
powerpc, the macro implementation is added for powerpc as of now.
Since the disasm_line__parse is used in other cases (perf annotate) and
not only data tye profiling, the powerpc callback includes changes to
work with binary code as well as mnemonic representation.
Also in case if the DSO read fails and libcapstone is not supported, the
approach fallback to use objdump as option. Hence as option, patch has
changes to ensure objdump option also works well.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-5-atrajeev@linux.vnet.ibm.com
[ Add check for strndup() result ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
TYPE_STATE_MAX_REGS is arch-dependent. Currently this is defined to be
16.
While checking if reg is valid using has_reg_type, max value is checked
using TYPE_STATE_MAX_REGS value.
Define this conditionally for powerpc.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-4-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
specific instruction tracking
Add "update_insn_state" callback to "struct arch" to handle instruction
tracking. Currently updating instruction state is handled by static
function "update_insn_state_x86" which is defined in "annotate-data.c".
Make this as a callback for specific arch and move to archs specific
file "arch/x86/annotate/instructions.c" . This will help to add helper
function for other platforms in file:
"arch/<platform>/annotate/instructions.c" and make changes/updates
easier.
Define callback "update_insn_state" as part of "struct arch", also make
some of the debug functions non-static so that it can be referenced from
other places.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-3-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Data type profiling uses instruction tracking by checking each
instruction and updating the register type state in some data
structures.
This is useful to find the data type in cases when the register state
gets transferred from one reg to another.
Example, in x86, "mov" instruction and in powerpc, "mr" instruction.
Currently these structures are defined in annotate-data.c and
instruction tracking is implemented only for x86.
Move these data structures to "annotate-data.h" header file so that
other arch implementations can use it in arch specific files as well.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Leak sanitizer will report memory leaks from python and the leak
sanitizer output causes tests to fail. For example:
```
$ perf test 98 -v
98: perf script tests:
--- start ---
test child forked, pid 1272962
DB test
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.046 MB /tmp/perf-test-script.x0EktdCel8/perf.data (8 samples) ]
call_path_table((1, 0, 0, 0)
call_path_table((2, 1, 0, 140339508617447)
call_path_table((3, 2, 2, 0)
call_path_table((4, 3, 3, 0)
call_path_table((5, 4, 4, 0)
call_path_table((6, 5, 5, 0)
call_path_table((7, 6, 6, 0)
call_path_table((8, 7, 7, 0)
call_path_table((9, 8, 8, 0)
call_path_table((10, 9, 9, 0)
call_path_table((11, 10, 10, 0)
call_path_table((12, 11, 11, 0)
call_path_table((13, 12, 1, 0)
sample_table((1, 1, 1, 1, 1, 1, 1, 8, -2058824120, 588306954119000, -1, 0, 0, 0, 0, 1, 0, 0, 128933429281, 0, 0, 13, 0, 0, 0, -1, -1))
sample_table((2, 1, 1, 1, 1, 1, 1, 8, -2058824120, 588306954137053, -1, 0, 0, 0, 0, 1, 0, 0, 128933429281, 0, 0, 13, 0, 0, 0, -1, -1))
sample_table((3, 1, 1, 1, 1, 1, 1, 8, -2058824120, 588306954140089, -1, 0, 0, 0, 0, 9, 0, 0, 128933429281, 0, 0, 13, 0, 0, 0, -1, -1))
sample_table((4, 1, 1, 1, 1, 1, 1, 8, -2058824120, 588306954142376, -1, 0, 0, 0, 0, 155, 0, 0, 128933429281, 0, 0, 13, 0, 0, 0, -1, -1))
sample_table((5, 1, 1, 1, 1, 1, 1, 8, -2058824120, 588306954144045, -1, 0, 0, 0, 0, 2493, 0, 0, 128933429281, 0, 0, 13, 0, 0, 0, -1, -1))
sample_table((6, 1, 1, 1, 1, 1, 12, 77, -2046828595, 588306954145722, -1, 0, 0, 0, 0, 47555, 0, 0, 128933429281, 0, 0, 13, 0, 0, 0, -1, -1))
call_path_table((14, 9, 14, 0)
call_path_table((15, 14, 15, 0)
call_path_table((16, 15, 0, -1040969624)
call_path_table((17, 16, 16, 0)
call_path_table((18, 17, 17, 0)
call_path_table((19, 18, 18, 0)
call_path_table((20, 19, 19, 0)
call_path_table((21, 20, 13, 0)
sample_table((7, 1, 1, 1, 2, 1, 13, 46, -2053700898, 588306954157436, -1, 0, 0, 0, 0, 964078, 0, 0, 128933429281, 0, 0, 21, 0, 0, 0, -1, -1))
call_path_table((22, 1, 21, 0)
call_path_table((23, 22, 22, 0)
call_path_table((24, 23, 23, 0)
call_path_table((25, 24, 24, 0)
call_path_table((26, 25, 25, 0)
call_path_table((27, 26, 26, 0)
call_path_table((28, 27, 27, 0)
call_path_table((29, 28, 28, 0)
call_path_table((30, 29, 29, 0)
call_path_table((31, 30, 30, 0)
call_path_table((32, 31, 31, 0)
call_path_table((33, 32, 32, 0)
call_path_table((34, 33, 33, 0)
call_path_table((35, 34, 20, 0)
sample_table((8, 1, 1, 1, 2, 1, 20, 49, -2046878127, 588306954378624, -1, 0, 0, 0, 0, 2534317, 0, 0, 128933429281, 0, 0, 35, 0, 0, 0, -1, -1))
=================================================================
==1272975==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 13628 byte(s) in 6 object(s) allocated from:
#0 0x56354f60c092 in malloc (/tmp/perf/perf+0x29c092)
#1 0x7ff25c7d02e7 in _PyObject_Malloc /build/python3.11/../Objects/obmalloc.c:2003:11
#2 0x7ff25c7d02e7 in _PyObject_Malloc /build/python3.11/../Objects/obmalloc.c:1996:1
SUMMARY: AddressSanitizer: 13628 byte(s) leaked in 6 allocation(s).
--- Cleaning up ---
---- end(-1) ----
98: perf script tests : FAILED!
```
Disable leak sanitizer when running specific perf+python tests to
avoid this. This causes the tests to pass when run with leak
sanitizer.
Reviewed-by: Aditya Gupta <adityag@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This is to pave the way for other BTF types, i.e. we try to find BTF
type then use things like btf_is_enum(btf_type) that we cached to find
the right strtoul and scnprintf routines.
For now only enum is supported, all the other types simple return zero
for scnprintf which makes it have the same behaviour as when BTF isn't
available, i.e. fallback to no pretty printing. Ditto for strtoul.
root@x1:~# perf test -v enum
124: perf trace enum augmentation tests : Ok
root@x1:~# perf test -v enum
124: perf trace enum augmentation tests : Ok
root@x1:~# perf test -v enum
124: perf trace enum augmentation tests : Ok
root@x1:~# perf test -v enum
124: perf trace enum augmentation tests : Ok
root@x1:~# perf test -v enum
124: perf trace enum augmentation tests : Ok
root@x1:~#
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Howard Chu <howardchu95@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240624181345.124764-9-howardchu95@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To have a central place that will look at the BTF type and call the
right scnprintf routine or return zero, meaning BTF pretty printing
isn't available or not implemented for a specific type.
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Howard Chu <howardchu95@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240624181345.124764-8-howardchu95@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
enums in 'perf trace'
Trace landlock_add_rule syscall to see if the output is desirable.
Trace the non-syscall tracepoint 'timer:hrtimer_init' and
'timer:hrtimer_start', see if the 'mode' argument is augmented,
the 'mode' enum argument has the prefix of 'HRTIMER_MODE_'
in its name.
Committer testing:
root@x1:~# perf test enum
124: perf trace enum augmentation tests : Ok
root@x1:~# perf test -v enum
124: perf trace enum augmentation tests : Ok
root@x1:~# perf trace -e landlock_add_rule perf test -v enum
0.000 ( 0.010 ms): perf/749827 landlock_add_rule(ruleset_fd: 11, rule_type: LANDLOCK_RULE_PATH_BENEATH, rule_attr: 0x7ffd324171d4, flags: 45) = -1 EINVAL (Invalid argument)
0.012 ( 0.002 ms): perf/749827 landlock_add_rule(ruleset_fd: 11, rule_type: LANDLOCK_RULE_NET_PORT, rule_attr: 0x7ffd324171e0, flags: 45) = -1 EINVAL (Invalid argument)
457.821 ( 0.007 ms): perf/749830 landlock_add_rule(ruleset_fd: 11, rule_type: LANDLOCK_RULE_PATH_BENEATH, rule_attr: 0x7ffd4acd31e4, flags: 45) = -1 EINVAL (Invalid argument)
457.832 ( 0.003 ms): perf/749830 landlock_add_rule(ruleset_fd: 11, rule_type: LANDLOCK_RULE_NET_PORT, rule_attr: 0x7ffd4acd31f0, flags: 45) = -1 EINVAL (Invalid argument)
124: perf trace enum augmentation tests : Ok
root@x1:~#
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20240619082042.4173621-6-howardchu95@gmail.com
Link: https://lore.kernel.org/r/20240624181345.124764-7-howardchu95@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We'll use it to add a regression test for the BTF augmentation of enum
arguments for tracepoints in 'perf trace':
root@x1:~# perf trace -e landlock_add_rule perf test -w landlock
0.000 ( 0.009 ms): perf/747160 landlock_add_rule(ruleset_fd: 11, rule_type: LANDLOCK_RULE_PATH_BENEATH, rule_attr: 0x7ffd8e258594, flags: 45) = -1 EINVAL (Invalid argument)
0.011 ( 0.002 ms): perf/747160 landlock_add_rule(ruleset_fd: 11, rule_type: LANDLOCK_RULE_NET_PORT, rule_attr: 0x7ffd8e2585a0, flags: 45) = -1 EINVAL (Invalid argument)
root@x1:~#
Committer notes:
It was agreed on the discussion (see Link below) to shorten then name of
the workload from 'landlock_add_rule' to 'landlock', and I moved it to a
separate patch.
Also, to address a build failure from Namhyung, I stopped loading
linux/landlock.h and instead added the used defines, enums and types to
make this build in older systems. All we want is to emit the syscall and
intercept it.
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/CAH0uvohaypdTV6Z7O5QSK+va_qnhZ6BP6oSJ89s1c1E0CjgxDA@mail.gmail.com
Link: https://lore.kernel.org/r/20240624181345.124764-1-howardchu95@gmail.com
Link: https://lore.kernel.org/r/20240624181345.124764-6-howardchu95@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Before:
perf $ ./perf trace -e timer:hrtimer_start --filter='mode!=HRTIMER_MODE_ABS_PINNED_HARD' --max-events=1
No resolver (strtoul) for "mode" in "timer:hrtimer_start", can't set filter "(mode!=HRTIMER_MODE_ABS_PINNED_HARD) && (common_pid != 281988)"
After:
perf $ ./perf trace -e timer:hrtimer_start --filter='mode!=HRTIMER_MODE_ABS_PINNED_HARD' --max-events=1
0.000 :0/0 timer:hrtimer_start(hrtimer: 0xffff9498a6ca5f18, function: 0xffffffffa77a5be0, expires: 12351248764875, softexpires: 12351248764875, mode: HRTIMER_MODE_ABS)
&& and ||:
perf $ ./perf trace -e timer:hrtimer_start --filter='mode != HRTIMER_MODE_ABS_PINNED_HARD && mode != HRTIMER_MODE_ABS' --max-events=1
0.000 Hyprland/534 timer:hrtimer_start(hrtimer: 0xffff9497801a84d0, function: 0xffffffffc04cdbe0, expires: 12639434638458, softexpires: 12639433638458, mode: HRTIMER_MODE_REL)
perf $ ./perf trace -e timer:hrtimer_start --filter='mode == HRTIMER_MODE_REL || mode == HRTIMER_MODE_PINNED' --max-events=1
0.000 ldlck-test/60639 timer:hrtimer_start(hrtimer: 0xffffb16404ee7bf8, function: 0xffffffffa7790420, expires: 12772614418016, softexpires: 12772614368016, mode: HRTIMER_MODE_REL)
Switching it up, using both enum name and integer value(--filter='mode == HRTIMER_MODE_ABS_PINNED_HARD || mode == 0'):
perf $ ./perf trace -e timer:hrtimer_start --filter='mode == HRTIMER_MODE_ABS_PINNED_HARD || mode == 0' --max-events=3
0.000 :0/0 timer:hrtimer_start(hrtimer: 0xffff9498a6ca5f18, function: 0xffffffffa77a5be0, expires: 12601748739825, softexpires: 12601748739825, mode: HRTIMER_MODE_ABS_PINNED_HARD)
0.036 :0/0 timer:hrtimer_start(hrtimer: 0xffff9498a6ca5f18, function: 0xffffffffa77a5be0, expires: 12518758748124, softexpires: 12518758748124, mode: HRTIMER_MODE_ABS_PINNED_HARD)
0.172 tmux: server/41881 timer:hrtimer_start(hrtimer: 0xffffb164081e7838, function: 0xffffffffa7790420, expires: 12518768255836, softexpires: 12518768205836, mode: HRTIMER_MODE_ABS)
P.S.
perf $ pahole hrtimer_mode
enum hrtimer_mode {
HRTIMER_MODE_ABS = 0,
HRTIMER_MODE_REL = 1,
HRTIMER_MODE_PINNED = 2,
HRTIMER_MODE_SOFT = 4,
HRTIMER_MODE_HARD = 8,
HRTIMER_MODE_ABS_PINNED = 2,
HRTIMER_MODE_REL_PINNED = 3,
HRTIMER_MODE_ABS_SOFT = 4,
HRTIMER_MODE_REL_SOFT = 5,
HRTIMER_MODE_ABS_PINNED_SOFT = 6,
HRTIMER_MODE_REL_PINNED_SOFT = 7,
HRTIMER_MODE_ABS_HARD = 8,
HRTIMER_MODE_REL_HARD = 9,
HRTIMER_MODE_ABS_PINNED_HARD = 10,
HRTIMER_MODE_REL_PINNED_HARD = 11,
};
Committer testing:
root@x1:~# perf trace -e timer:hrtimer_start --filter='mode != HRTIMER_MODE_ABS' --max-events=2
0.000 :0/0 timer:hrtimer_start(hrtimer: 0xffff8d4eff2a5050, function: 0xffffffff9e22ddd0, expires: 241502326000000, softexpires: 241502326000000, mode: HRTIMER_MODE_ABS_PINNED_HARD)
18446744073709.488 :0/0 timer:hrtimer_start(hrtimer: 0xffff8d4eff425050, function: 0xffffffff9e22ddd0, expires: 241501814000000, softexpires: 241501814000000, mode: HRTIMER_MODE_ABS_PINNED_HARD)
root@x1:~# perf trace -e timer:hrtimer_start --filter='mode != HRTIMER_MODE_ABS && mode != HRTIMER_MODE_ABS_PINNED_HARD' --max-events=2
0.000 podman/510644 timer:hrtimer_start(hrtimer: 0xffffa2024f5f7dd0, function: 0xffffffff9e2170c0, expires: 241530497418194, softexpires: 241530497368194, mode: HRTIMER_MODE_REL)
40.251 gnome-shell/2484 timer:hrtimer_start(hrtimer: 0xffff8d48bda17650, function: 0xffffffffc0661550, expires: 241550528619247, softexpires: 241550527619247, mode: HRTIMER_MODE_REL)
root@x1:~# perf trace -v -e timer:hrtimer_start --filter='mode != HRTIMER_MODE_ABS && mode != HRTIMER_MODE_ABS_PINNED_HARD && mode != HRTIMER_MODE_REL' --max-events=2
Using CPUID GenuineIntel-6-BA-3
vmlinux BTF loaded
<SNIP>
0
0xa
0x1
New filter for timer:hrtimer_start: (mode != 0 && mode != 0xa && mode != 0x1) && (common_pid != 524049 && common_pid != 4041)
mmap size 528384B
^Croot@x1:~#
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/ZnCcliuecJABD5FN@x1
Link: https://lore.kernel.org/r/20240624181345.124764-5-howardchu95@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Before:
perf $ ./perf trace -e timer:hrtimer_start --max-events=1
0.000 :0/0 timer:hrtimer_start(hrtimer: 0xffff974466c25f18, function: 0xffffffff89da5be0, expires: 377432432256753, softexpires: 377432432256753, mode: 10)
After:
perf $ ./perf trace -e timer:hrtimer_start --max-events=1
0.000 :0/0 timer:hrtimer_start(hrtimer: 0xffff9498a6ca5f18, function: 0xffffffffa77a5be0, expires: 4382442895089, softexpires: 4382442895089, mode: HRTIMER_MODE_ABS_PINNED_HARD)
in which HRTIMER_MODE_ABS_PINNED_HARD is:
perf $ pahole hrtimer_mode
enum hrtimer_mode {
HRTIMER_MODE_ABS = 0,
HRTIMER_MODE_REL = 1,
HRTIMER_MODE_PINNED = 2,
HRTIMER_MODE_SOFT = 4,
HRTIMER_MODE_HARD = 8,
HRTIMER_MODE_ABS_PINNED = 2,
HRTIMER_MODE_REL_PINNED = 3,
HRTIMER_MODE_ABS_SOFT = 4,
HRTIMER_MODE_REL_SOFT = 5,
HRTIMER_MODE_ABS_PINNED_SOFT = 6,
HRTIMER_MODE_REL_PINNED_SOFT = 7,
HRTIMER_MODE_ABS_HARD = 8,
HRTIMER_MODE_REL_HARD = 9,
HRTIMER_MODE_ABS_PINNED_HARD = 10,
HRTIMER_MODE_REL_PINNED_HARD = 11,
};
Can also be tested by
./perf trace -e pagemap:mm_lru_insertion,timer:hrtimer_start,timer:hrtimer_init,skb:kfree_skb --max-events=10
(Chose these 4 events because they happen quite frequently.)
However some enum arguments may not be contained in vmlinux BTF. To see
what enum arguments are supported, use:
vmlinux_dir $ bpftool btf dump file /sys/kernel/btf/vmlinux > vmlinux
vmlinux_dir $ while read l; do grep "ENUM '$l'" vmlinux; done < <(grep field:enum /sys/kernel/tracing/events/*/*/format | awk '{print $3}' | sort | uniq) | awk '{print $3}' | sed "s/'\(.*\)'/\1/g"
dev_pm_qos_req_type
error_detector
hrtimer_mode
i2c_slave_event
ieee80211_bss_type
lru_list
migrate_mode
nl80211_auth_type
nl80211_band
nl80211_iftype
numa_vmaskip_reason
pm_qos_req_action
pwm_polarity
skb_drop_reason
thermal_trip_type
xen_lazy_mode
xen_mc_extend_args
xen_mc_flush_reason
zone_type
And what tracepoints have these enum types as their arguments:
vmlinux_dir $ while read l; do grep "ENUM '$l'" vmlinux; done < <(grep field:enum /sys/kernel/tracing/events/*/*/format | awk '{print $3}' | sort | uniq) | awk '{print $3}' | sed "s/'\(.*\)'/\1/g" > good_enums
vmlinux_dir $ cat good_enums
dev_pm_qos_req_type
error_detector
hrtimer_mode
i2c_slave_event
ieee80211_bss_type
lru_list
migrate_mode
nl80211_auth_type
nl80211_band
nl80211_iftype
numa_vmaskip_reason
pm_qos_req_action
pwm_polarity
skb_drop_reason
thermal_trip_type
xen_lazy_mode
xen_mc_extend_args
xen_mc_flush_reason
zone_type
vmlinux_dir $ grep -f good_enums -l /sys/kernel/tracing/events/*/*/format
/sys/kernel/tracing/events/cfg80211/cfg80211_chandef_dfs_required/format
/sys/kernel/tracing/events/cfg80211/cfg80211_ch_switch_notify/format
/sys/kernel/tracing/events/cfg80211/cfg80211_ch_switch_started_notify/format
/sys/kernel/tracing/events/cfg80211/cfg80211_get_bss/format
/sys/kernel/tracing/events/cfg80211/cfg80211_ibss_joined/format
/sys/kernel/tracing/events/cfg80211/cfg80211_inform_bss_frame/format
/sys/kernel/tracing/events/cfg80211/cfg80211_radar_event/format
/sys/kernel/tracing/events/cfg80211/cfg80211_ready_on_channel_expired/format
/sys/kernel/tracing/events/cfg80211/cfg80211_ready_on_channel/format
/sys/kernel/tracing/events/cfg80211/cfg80211_reg_can_beacon/format
/sys/kernel/tracing/events/cfg80211/cfg80211_return_bss/format
/sys/kernel/tracing/events/cfg80211/cfg80211_tx_mgmt_expired/format
/sys/kernel/tracing/events/cfg80211/rdev_add_virtual_intf/format
/sys/kernel/tracing/events/cfg80211/rdev_auth/format
/sys/kernel/tracing/events/cfg80211/rdev_change_virtual_intf/format
/sys/kernel/tracing/events/cfg80211/rdev_channel_switch/format
/sys/kernel/tracing/events/cfg80211/rdev_connect/format
/sys/kernel/tracing/events/cfg80211/rdev_inform_bss/format
/sys/kernel/tracing/events/cfg80211/rdev_libertas_set_mesh_channel/format
/sys/kernel/tracing/events/cfg80211/rdev_mgmt_tx/format
/sys/kernel/tracing/events/cfg80211/rdev_remain_on_channel/format
/sys/kernel/tracing/events/cfg80211/rdev_return_chandef/format
/sys/kernel/tracing/events/cfg80211/rdev_return_int_survey_info/format
/sys/kernel/tracing/events/cfg80211/rdev_set_ap_chanwidth/format
/sys/kernel/tracing/events/cfg80211/rdev_set_monitor_channel/format
/sys/kernel/tracing/events/cfg80211/rdev_set_radar_background/format
/sys/kernel/tracing/events/cfg80211/rdev_start_ap/format
/sys/kernel/tracing/events/cfg80211/rdev_start_radar_detection/format
/sys/kernel/tracing/events/cfg80211/rdev_tdls_channel_switch/format
/sys/kernel/tracing/events/compaction/mm_compaction_defer_compaction/format
/sys/kernel/tracing/events/compaction/mm_compaction_deferred/format
/sys/kernel/tracing/events/compaction/mm_compaction_defer_reset/format
/sys/kernel/tracing/events/compaction/mm_compaction_finished/format
/sys/kernel/tracing/events/compaction/mm_compaction_kcompactd_wake/format
/sys/kernel/tracing/events/compaction/mm_compaction_suitable/format
/sys/kernel/tracing/events/compaction/mm_compaction_wakeup_kcompactd/format
/sys/kernel/tracing/events/error_report/error_report_end/format
/sys/kernel/tracing/events/i2c_slave/i2c_slave/format
/sys/kernel/tracing/events/migrate/mm_migrate_pages/format
/sys/kernel/tracing/events/migrate/mm_migrate_pages_start/format
/sys/kernel/tracing/events/pagemap/mm_lru_insertion/format
/sys/kernel/tracing/events/power/dev_pm_qos_add_request/format
/sys/kernel/tracing/events/power/dev_pm_qos_remove_request/format
/sys/kernel/tracing/events/power/dev_pm_qos_update_request/format
/sys/kernel/tracing/events/power/pm_qos_update_flags/format
/sys/kernel/tracing/events/power/pm_qos_update_target/format
/sys/kernel/tracing/events/pwm/pwm_apply/format
/sys/kernel/tracing/events/pwm/pwm_get/format
/sys/kernel/tracing/events/sched/sched_skip_vma_numa/format
/sys/kernel/tracing/events/skb/kfree_skb/format
/sys/kernel/tracing/events/thermal/thermal_zone_trip/format
/sys/kernel/tracing/events/timer/hrtimer_init/format
/sys/kernel/tracing/events/timer/hrtimer_start/format
/sys/kernel/tracing/events/xen/xen_mc_batch/format
/sys/kernel/tracing/events/xen/xen_mc_extend_args/format
/sys/kernel/tracing/events/xen/xen_mc_flush_reason/format
/sys/kernel/tracing/events/xen/xen_mc_issue/format
Committer testing:
root@x1:~# perf trace -e timer:hrtimer_start --max-events=2
0.000 :0/0 timer:hrtimer_start(hrtimer: 0xffff8d4eff225050, function: 0xffffffff9e22ddd0, expires: 241152380000000, softexpires: 241152380000000, mode: HRTIMER_MODE_ABS)
0.028 :0/0 timer:hrtimer_start(hrtimer: 0xffff8d4eff225050, function: 0xffffffff9e22ddd0, expires: 241153654000000, softexpires: 241153654000000, mode: HRTIMER_MODE_ABS_PINNED_HARD)
root@x1:~#
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reviewed-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/20240615032743.112750-1-howardchu95@gmail.com
Link: https://lore.kernel.org/r/20240624181345.124764-4-howardchu95@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In this patch, BTF is used to turn enum value to the corresponding
name. There is only one system call that uses enum value as its
argument, that is `landlock_add_rule()`.
The vmlinux btf is loaded lazily, when user decided to trace the
`landlock_add_rule` syscall. But if one decide to run `perf trace`
without any arguments, the behaviour is to trace `landlock_add_rule`,
so vmlinux btf will be loaded by default.
The laziest behaviour is to load vmlinux btf when a
`landlock_add_rule` syscall hits. But I think you could lose some
samples when loading vmlinux btf at run time, for it can delay the
handling of other samples. I might need your precious opinions on
this...
before:
```
perf $ ./perf trace -e landlock_add_rule
0.000 ( 0.008 ms): ldlck-test/438194 landlock_add_rule(rule_type: 2) = -1 EBADFD (File descriptor in bad state)
0.010 ( 0.001 ms): ldlck-test/438194 landlock_add_rule(rule_type: 1) = -1 EBADFD (File descriptor in bad state)
```
after:
```
perf $ ./perf trace -e landlock_add_rule
0.000 ( 0.029 ms): ldlck-test/438194 landlock_add_rule(rule_type: LANDLOCK_RULE_NET_PORT) = -1 EBADFD (File descriptor in bad state)
0.036 ( 0.004 ms): ldlck-test/438194 landlock_add_rule(rule_type: LANDLOCK_RULE_PATH_BENEATH) = -1 EBADFD (File descriptor in bad state)
```
Committer notes:
Made it build with NO_LIBBPF=1, simplified btf_enum_fprintf(), see [1]
for the discussion.
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/20240613022757.3589783-1-howardchu95@gmail.com
Link: https://lore.kernel.org/lkml/ZnXAhFflUl_LV1QY@x1 # [1]
Link: https://lore.kernel.org/r/20240624181345.124764-3-howardchu95@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"Some more build fixes and a random crash fix:
- Fix cross-build by setting pkg-config env according to the arch
- Fix static build for missing library dependencies
- Fix Segfault when callchain has no symbols"
* tag 'perf-tools-fixes-for-v6.11-2024-07-30' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf docs: Document cross compilation
perf: build: Link lib 'zstd' for static build
perf: build: Link lib 'lzma' for static build
perf: build: Only link libebl.a for old libdw
perf: build: Set Python configuration for cross compilation
perf: build: Setup PKG_CONFIG_LIBDIR for cross compilation
perf tool: fix dereferencing NULL al->maps
|
|
Records the commands for cross compilation with two methods.
The first method relies on Multiarch. The second approach is to explicitly
specify the PKG_CONFIG variables, which is widely used in build system
(like Buildroot, Yocto, etc).
Co-developed-by: James Clark <james.clark@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: amadio@gentoo.org
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240717082211.524826-7-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
When build static perf, Makefile reports the error:
Makefile.config:480: No libdw DWARF unwind found, Please install
elfutils-devel/libdw-dev >= 0.158 and/or set LIBDW_DIR
The libdw has been installed on the system, but the build system fails
to build the feature detecting binary 'test-libdw-dwarf-unwind'. The
failure is caused by missing to link the lib 'zstd'.
Link lib 'zstd' for the static build, in the end, the dwarf feature can
be enabled in the static perf.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: amadio@gentoo.org
Cc: James Clark <james.clark@linaro.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240717082211.524826-6-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Since libdw version 0.177, elfutils has merged libebl.a into libdw (see
the commit "libebl: Don't install libebl.a, libebl.h and remove backends
from spec." in the elfutils repository).
As a result, libebl.a does not exist on Debian Bullseye and newer
releases, causing static perf builds to fail on these distributions.
This commit checks the libdw version and only links libebl.a if it
detects that the libdw version is older than 0.177.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: amadio@gentoo.org
Cc: James Clark <james.clark@linaro.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240717082211.524826-4-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Python configuration has dedicated folders for different architectures.
For example, Python 3.11 has two folders as shown below, one for Arm64
and another for x86_64:
/usr/lib/python3.11/config-3.11-aarch64-linux-gnu/
/usr/lib/python3.11/config-3.11-x86_64-linux-gnu/
This commit updates the Python configuration path based on the
compiler's machine type, guiding the compiler to find the correct path
for Python libraries. It also renames the generated .so file name to
match the machine name.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: amadio@gentoo.org
Cc: James Clark <james.clark@linaro.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240717082211.524826-3-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
On recent Linux distros like Ubuntu Noble and Debian Bookworm, the
'pkg-config-aarch64-linux-gnu' package is missing. As a result, the
aarch64-linux-gnu-pkg-config command is not available, which causes
build failures.
When a build passes the environment variables PKG_CONFIG_LIBDIR or
PKG_CONFIG_PATH, like a user uses make command or a build system
(like Yocto, Buildroot, etc) prepares the variables and passes to the
Perf's Makefile, the commit keeps these variables for package
configuration. Otherwise, this commit sets the PKG_CONFIG_LIBDIR
variable to use the Multiarch libs for the cross compilation.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: amadio@gentoo.org
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240717082211.524826-2-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
With 0dd5041c9a0e ("perf addr_location: Add init/exit/copy functions"),
when cpumode is 3 (macro PERF_RECORD_MISC_HYPERVISOR),
thread__find_map() could return with al->maps being NULL.
The path below could add a callchain_cursor_node with NULL ms.maps.
add_callchain_ip()
thread__find_symbol(.., &al)
thread__find_map(.., &al) // al->maps becomes NULL
ms.maps = maps__get(al.maps)
callchain_cursor_append(..., &ms, ...)
node->ms.maps = maps__get(ms->maps)
Then the path below would dereference NULL maps and get segfault.
fill_callchain_info()
maps__machine(node->ms.maps);
Fix it by checking if maps is NULL in fill_callchain_info().
Fixes: 0dd5041c9a0e ("perf addr_location: Add init/exit/copy functions")
Signed-off-by: Casey Chen <cachen@purestorage.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: yzhong@purestorage.com
Link: https://lore.kernel.org/r/20240722211548.61455-1-cachen@purestorage.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"Two fixes for building perf and other tools:
- Fix breakage in tracing tools due to pkg-config for
libtrace{event,fs}
- Fix build of perf when libunwind is used"
* tag 'perf-tools-fixes-for-v6.11-2024-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf dso: Fix build when libunwind is enabled
tools/latency: Use pkg-config in lib_setup of Makefile.config
tools/rtla: Use pkg-config in lib_setup of Makefile.config
tools/verification: Use pkg-config in lib_setup of Makefile.config
tools: Make pkg-config dependency checks usable by other tools
perf build: Warn if libtracefs is not found
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove tristate choice support from Kconfig
- Stop using the PROVIDE() directive in the linker script
- Reduce the number of links for the combination of CONFIG_KALLSYMS and
CONFIG_DEBUG_INFO_BTF
- Enable the warning for symbol reference to .exit.* sections by
default
- Fix warnings in RPM package builds
- Improve scripts/make_fit.py to generate a FIT image with separate
base DTB and overlays
- Improve choice value calculation in Kconfig
- Fix conditional prompt behavior in choice in Kconfig
- Remove support for the uncommon EMAIL environment variable in Debian
package builds
- Remove support for the uncommon "name <email>" form for the DEBEMAIL
environment variable
- Raise the minimum supported GNU Make version to 4.0
- Remove stale code for the absolute kallsyms
- Move header files commonly used for host programs to scripts/include/
- Introduce the pacman-pkg target to generate a pacman package used in
Arch Linux
- Clean up Kconfig
* tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (65 commits)
kbuild: doc: gcc to CC change
kallsyms: change sym_entry::percpu_absolute to bool type
kallsyms: unify seq and start_pos fields of struct sym_entry
kallsyms: add more original symbol type/name in comment lines
kallsyms: use \t instead of a tab in printf()
kallsyms: avoid repeated calculation of array size for markers
kbuild: add script and target to generate pacman package
modpost: use generic macros for hash table implementation
kbuild: move some helper headers from scripts/kconfig/ to scripts/include/
Makefile: add comment to discourage tools/* addition for kernel builds
kbuild: clean up scripts/remove-stale-files
kconfig: recursive checks drop file/lineno
kbuild: rpm-pkg: introduce a simple changelog section for kernel.spec
kallsyms: get rid of code for absolute kallsyms
kbuild: Create INSTALL_PATH directory if it does not exist
kbuild: Abort make on install failures
kconfig: remove 'e1' and 'e2' macros from expression deduplication
kconfig: remove SYMBOL_CHOICEVAL flag
kconfig: add const qualifiers to several function arguments
kconfig: call expr_eliminate_yn() at least once in expr_eliminate_dups()
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
- Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
- Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1
of the protocol
- FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
- New command-line parameter to control the WFx trap behavior under
KVM
- Introduce kCFI hardening in the EL2 hypervisor
- Fixes + cleanups for handling presence/absence of FEAT_TCRX
- Miscellaneous fixes + documentation updates
LoongArch:
- Add paravirt steal time support
- Add support for KVM_DIRTY_LOG_INITIALLY_SET
- Add perf kvm-stat support for loongarch
RISC-V:
- Redirect AMO load/store access fault traps to guest
- perf kvm stat support
- Use guest files for IMSIC virtualization, when available
s390:
- Assortment of tiny fixes which are not time critical
x86:
- Fixes for Xen emulation
- Add a global struct to consolidate tracking of host values, e.g.
EFER
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the
effective APIC bus frequency, because TDX
- Print the name of the APICv/AVIC inhibits in the relevant
tracepoint
- Clean up KVM's handling of vendor specific emulation to
consistently act on "compatible with Intel/AMD", versus checking
for a specific vendor
- Drop MTRR virtualization, and instead always honor guest PAT on
CPUs that support self-snoop
- Update to the newfangled Intel CPU FMS infrastructure
- Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as
it reads '0' and writes from userspace are ignored
- Misc cleanups
x86 - MMU:
- Small cleanups, renames and refactoring extracted from the upcoming
Intel TDX support
- Don't allocate kvm_mmu_page.shadowed_translation for shadow pages
that can't hold leafs SPTEs
- Unconditionally drop mmu_lock when allocating TDP MMU page tables
for eager page splitting, to avoid stalling vCPUs when splitting
huge pages
- Bug the VM instead of simply warning if KVM tries to split a SPTE
that is non-present or not-huge. KVM is guaranteed to end up in a
broken state because the callers fully expect a valid SPTE, it's
all but dangerous to let more MMU changes happen afterwards
x86 - AMD:
- Make per-CPU save_area allocations NUMA-aware
- Force sev_es_host_save_area() to be inlined to avoid calling into
an instrumentable function from noinstr code
- Base support for running SEV-SNP guests. API-wise, this includes a
new KVM_X86_SNP_VM type, encrypting/measure the initial image into
guest memory, and finalizing it before launching it. Internally,
there are some gmem/mmu hooks needed to prepare gmem-allocated
pages before mapping them into guest private memory ranges
This includes basic support for attestation guest requests, enough
to say that KVM supports the GHCB 2.0 specification
There is no support yet for loading into the firmware those signing
keys to be used for attestation requests, and therefore no need yet
for the host to provide certificate data for those keys.
To support fetching certificate data from userspace, a new KVM exit
type will be needed to handle fetching the certificate from
userspace.
An attempt to define a new KVM_EXIT_COCO / KVM_EXIT_COCO_REQ_CERTS
exit type to handle this was introduced in v1 of this patchset, but
is still being discussed by community, so for now this patchset
only implements a stub version of SNP Extended Guest Requests that
does not provide certificate data
x86 - Intel:
- Remove an unnecessary EPT TLB flush when enabling hardware
- Fix a series of bugs that cause KVM to fail to detect nested
pending posted interrupts as valid wake eents for a vCPU executing
HLT in L2 (with HLT-exiting disable by L1)
- KVM: x86: Suppress MMIO that is triggered during task switch
emulation
Explicitly suppress userspace emulated MMIO exits that are
triggered when emulating a task switch as KVM doesn't support
userspace MMIO during complex (multi-step) emulation
Silently ignoring the exit request can result in the
WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to userspace
for some other reason prior to purging mmio_needed
See commit 0dc902267cb3 ("KVM: x86: Suppress pending MMIO write
exits if emulator detects exception") for more details on KVM's
limitations with respect to emulated MMIO during complex emulator
flows
Generic:
- Rename the AS_UNMOVABLE flag that was introduced for KVM to
AS_INACCESSIBLE, because the special casing needed by these pages
is not due to just unmovability (and in fact they are only
unmovable because the CPU cannot access them)
- New ioctl to populate the KVM page tables in advance, which is
useful to mitigate KVM page faults during guest boot or after live
migration. The code will also be used by TDX, but (probably) not
through the ioctl
- Enable halt poll shrinking by default, as Intel found it to be a
clear win
- Setup empty IRQ routing when creating a VM to avoid having to
synchronize SRCU when creating a split IRQCHIP on x86
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with
a flag that arch code can use for hooking both sched_in() and
sched_out()
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace
detect bugs
- Mark a vCPU as preempted if and only if it's scheduled out while in
the KVM_RUN loop, e.g. to avoid marking it preempted and thus
writing guest memory when retrieving guest state during live
migration blackout
Selftests:
- Remove dead code in the memslot modification stress test
- Treat "branch instructions retired" as supported on all AMD Family
17h+ CPUs
- Print the guest pseudo-RNG seed only when it changes, to avoid
spamming the log for tests that create lots of VMs
- Make the PMU counters test less flaky when counting LLC cache
misses by doing CLFLUSH{OPT} in every loop iteration"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
crypto: ccp: Add the SNP_VLEK_LOAD command
KVM: x86/pmu: Add kvm_pmu_call() to simplify static calls of kvm_pmu_ops
KVM: x86: Introduce kvm_x86_call() to simplify static calls of kvm_x86_ops
KVM: x86: Replace static_call_cond() with static_call()
KVM: SEV: Provide support for SNP_EXTENDED_GUEST_REQUEST NAE event
x86/sev: Move sev_guest.h into common SEV header
KVM: SEV: Provide support for SNP_GUEST_REQUEST NAE event
KVM: x86: Suppress MMIO that is triggered during task switch emulation
KVM: x86/mmu: Clean up make_huge_page_split_spte() definition and intro
KVM: x86/mmu: Bug the VM if KVM tries to split a !hugepage SPTE
KVM: selftests: x86: Add test for KVM_PRE_FAULT_MEMORY
KVM: x86: Implement kvm_arch_vcpu_pre_fault_memory()
KVM: x86/mmu: Make kvm_mmu_do_page_fault() return mapped level
KVM: x86/mmu: Account pf_{fixed,emulate,spurious} in callers of "do page fault"
KVM: x86/mmu: Bump pf_taken stat only in the "real" page fault handler
KVM: Add KVM_PRE_FAULT_MEMORY vcpu ioctl to pre-populate guest memory
KVM: Document KVM_PRE_FAULT_MEMORY ioctl
mm, virt: merge AS_UNMOVABLE and AS_INACCESSIBLE
perf kvm: Add kvm-stat for loongarch64
LoongArch: KVM: Add PV steal time support in guest side
...
|
|
Commit cf8e8658100d ("arch: Remove Itanium (IA-64) architecture")
removed the last use of the absolute kallsyms.
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/all/20240221202655.2423854-1-jannh@google.com/
[masahiroy@kernel.org: rebase the code and reword the commit description]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Now that symsrc_filename is always accessed through an accessor, we also
need a free() function for it to avoid the following compilation error:
util/unwind-libunwind-local.c:416:12: error: lvalue required as unary
‘&’ operand
416 | zfree(&dso__symsrc_filename(dso));
Fixes: 1553419c3c10 ("perf dso: Fix address sanitizer build")
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20240715094715.3914813-1-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Other tools, in tools/verification and tools/tracing, make use of
libtraceevent and libtracefs as dependencies. This allows setting
up the feature check flags for them as well.
Signed-off-by: Guilherme Amadio <amadio@gentoo.org>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Tested-by: Leo Yan <leo.yan@arm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20240717174739.186988-3-amadio@gentoo.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Signed-off-by: Guilherme Amadio <amadio@gentoo.org>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Tested-by: Leo Yan <leo.yan@arm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20240717174739.186988-2-amadio@gentoo.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
This is a bug found when implementing pretty-printing for the
landlock_add_rule system call, I decided to send this patch separately
because this is a serious bug that should be fixed fast.
I wrote a test program to do landlock_add_rule syscall in a loop,
yet perf trace -e landlock_add_rule freezes, giving no output.
This bug is introduced by the false understanding of the variable "key"
below:
```
for (key = 0; key < trace->sctbl->syscalls.nr_entries; ++key) {
struct syscall *sc = trace__syscall_info(trace, NULL, key);
...
}
```
The code above seems right at the beginning, but when looking at
syscalltbl.c, I found these lines:
```
for (i = 0; i <= syscalltbl_native_max_id; ++i)
if (syscalltbl_native[i])
++nr_entries;
entries = tbl->syscalls.entries = malloc(sizeof(struct syscall) * nr_entries);
...
for (i = 0, j = 0; i <= syscalltbl_native_max_id; ++i) {
if (syscalltbl_native[i]) {
entries[j].name = syscalltbl_native[i];
entries[j].id = i;
++j;
}
}
```
meaning the key is merely an index to traverse the syscall table,
instead of the actual syscall id for this particular syscall.
So if one uses key to do trace__syscall_info(trace, NULL, key), because
key only goes up to trace->sctbl->syscalls.nr_entries, for example, on
my X86_64 machine, this number is 373, it will end up neglecting all
the rest of the syscall, in my case, everything after `rseq`, because
the traversal will stop at 373, and `rseq` is the last syscall whose id
is lower than 373
in tools/perf/arch/x86/include/generated/asm/syscalls_64.c:
```
...
[334] = "rseq",
[424] = "pidfd_send_signal",
...
```
The reason why the key is scrambled but perf trace works well is that
key is used in trace__syscall_info(trace, NULL, key) to do
trace->syscalls.table[id], this makes sure that the struct syscall returned
actually has an id the same value as key, making the later bpf_prog
matching all correct.
After fixing this bug, I can do perf trace on 38 more syscalls, and
because more syscalls are visible, we get 8 more syscalls that can be
augmented.
before:
perf $ perf trace -vv --max-events=1 |& grep Reusing
Reusing "open" BPF sys_enter augmenter for "stat"
Reusing "open" BPF sys_enter augmenter for "lstat"
Reusing "open" BPF sys_enter augmenter for "access"
Reusing "connect" BPF sys_enter augmenter for "accept"
Reusing "sendto" BPF sys_enter augmenter for "recvfrom"
Reusing "connect" BPF sys_enter augmenter for "bind"
Reusing "connect" BPF sys_enter augmenter for "getsockname"
Reusing "connect" BPF sys_enter augmenter for "getpeername"
Reusing "open" BPF sys_enter augmenter for "execve"
Reusing "open" BPF sys_enter augmenter for "truncate"
Reusing "open" BPF sys_enter augmenter for "chdir"
Reusing "open" BPF sys_enter augmenter for "mkdir"
Reusing "open" BPF sys_enter augmenter for "rmdir"
Reusing "open" BPF sys_enter augmenter for "creat"
Reusing "open" BPF sys_enter augmenter for "link"
Reusing "open" BPF sys_enter augmenter for "unlink"
Reusing "open" BPF sys_enter augmenter for "symlink"
Reusing "open" BPF sys_enter augmenter for "readlink"
Reusing "open" BPF sys_enter augmenter for "chmod"
Reusing "open" BPF sys_enter augmenter for "chown"
Reusing "open" BPF sys_enter augmenter for "lchown"
Reusing "open" BPF sys_enter augmenter for "mknod"
Reusing "open" BPF sys_enter augmenter for "statfs"
Reusing "open" BPF sys_enter augmenter for "pivot_root"
Reusing "open" BPF sys_enter augmenter for "chroot"
Reusing "open" BPF sys_enter augmenter for "acct"
Reusing "open" BPF sys_enter augmenter for "swapon"
Reusing "open" BPF sys_enter augmenter for "swapoff"
Reusing "open" BPF sys_enter augmenter for "delete_module"
Reusing "open" BPF sys_enter augmenter for "setxattr"
Reusing "open" BPF sys_enter augmenter for "lsetxattr"
Reusing "openat" BPF sys_enter augmenter for "fsetxattr"
Reusing "open" BPF sys_enter augmenter for "getxattr"
Reusing "open" BPF sys_enter augmenter for "lgetxattr"
Reusing "openat" BPF sys_enter augmenter for "fgetxattr"
Reusing "open" BPF sys_enter augmenter for "listxattr"
Reusing "open" BPF sys_enter augmenter for "llistxattr"
Reusing "open" BPF sys_enter augmenter for "removexattr"
Reusing "open" BPF sys_enter augmenter for "lremovexattr"
Reusing "fsetxattr" BPF sys_enter augmenter for "fremovexattr"
Reusing "open" BPF sys_enter augmenter for "mq_open"
Reusing "open" BPF sys_enter augmenter for "mq_unlink"
Reusing "fsetxattr" BPF sys_enter augmenter for "add_key"
Reusing "fremovexattr" BPF sys_enter augmenter for "request_key"
Reusing "fremovexattr" BPF sys_enter augmenter for "inotify_add_watch"
Reusing "fremovexattr" BPF sys_enter augmenter for "mkdirat"
Reusing "fremovexattr" BPF sys_enter augmenter for "mknodat"
Reusing "fremovexattr" BPF sys_enter augmenter for "fchownat"
Reusing "fremovexattr" BPF sys_enter augmenter for "futimesat"
Reusing "fremovexattr" BPF sys_enter augmenter for "newfstatat"
Reusing "fremovexattr" BPF sys_enter augmenter for "unlinkat"
Reusing "fremovexattr" BPF sys_enter augmenter for "linkat"
Reusing "open" BPF sys_enter augmenter for "symlinkat"
Reusing "fremovexattr" BPF sys_enter augmenter for "readlinkat"
Reusing "fremovexattr" BPF sys_enter augmenter for "fchmodat"
Reusing "fremovexattr" BPF sys_enter augmenter for "faccessat"
Reusing "fremovexattr" BPF sys_enter augmenter for "utimensat"
Reusing "connect" BPF sys_enter augmenter for "accept4"
Reusing "fremovexattr" BPF sys_enter augmenter for "name_to_handle_at"
Reusing "fremovexattr" BPF sys_enter augmenter for "renameat2"
Reusing "open" BPF sys_enter augmenter for "memfd_create"
Reusing "fremovexattr" BPF sys_enter augmenter for "execveat"
Reusing "fremovexattr" BPF sys_enter augmenter for "statx"
after
perf $ perf trace -vv --max-events=1 |& grep Reusing
Reusing "open" BPF sys_enter augmenter for "stat"
Reusing "open" BPF sys_enter augmenter for "lstat"
Reusing "open" BPF sys_enter augmenter for "access"
Reusing "connect" BPF sys_enter augmenter for "accept"
Reusing "sendto" BPF sys_enter augmenter for "recvfrom"
Reusing "connect" BPF sys_enter augmenter for "bind"
Reusing "connect" BPF sys_enter augmenter for "getsockname"
Reusing "connect" BPF sys_enter augmenter for "getpeername"
Reusing "open" BPF sys_enter augmenter for "execve"
Reusing "open" BPF sys_enter augmenter for "truncate"
Reusing "open" BPF sys_enter augmenter for "chdir"
Reusing "open" BPF sys_enter augmenter for "mkdir"
Reusing "open" BPF sys_enter augmenter for "rmdir"
Reusing "open" BPF sys_enter augmenter for "creat"
Reusing "open" BPF sys_enter augmenter for "link"
Reusing "open" BPF sys_enter augmenter for "unlink"
Reusing "open" BPF sys_enter augmenter for "symlink"
Reusing "open" BPF sys_enter augmenter for "readlink"
Reusing "open" BPF sys_enter augmenter for "chmod"
Reusing "open" BPF sys_enter augmenter for "chown"
Reusing "open" BPF sys_enter augmenter for "lchown"
Reusing "open" BPF sys_enter augmenter for "mknod"
Reusing "open" BPF sys_enter augmenter for "statfs"
Reusing "open" BPF sys_enter augmenter for "pivot_root"
Reusing "open" BPF sys_enter augmenter for "chroot"
Reusing "open" BPF sys_enter augmenter for "acct"
Reusing "open" BPF sys_enter augmenter for "swapon"
Reusing "open" BPF sys_enter augmenter for "swapoff"
Reusing "open" BPF sys_enter augmenter for "delete_module"
Reusing "open" BPF sys_enter augmenter for "setxattr"
Reusing "open" BPF sys_enter augmenter for "lsetxattr"
Reusing "openat" BPF sys_enter augmenter for "fsetxattr"
Reusing "open" BPF sys_enter augmenter for "getxattr"
Reusing "open" BPF sys_enter augmenter for "lgetxattr"
Reusing "openat" BPF sys_enter augmenter for "fgetxattr"
Reusing "open" BPF sys_enter augmenter for "listxattr"
Reusing "open" BPF sys_enter augmenter for "llistxattr"
Reusing "open" BPF sys_enter augmenter for "removexattr"
Reusing "open" BPF sys_enter augmenter for "lremovexattr"
Reusing "fsetxattr" BPF sys_enter augmenter for "fremovexattr"
Reusing "open" BPF sys_enter augmenter for "mq_open"
Reusing "open" BPF sys_enter augmenter for "mq_unlink"
Reusing "fsetxattr" BPF sys_enter augmenter for "add_key"
Reusing "fremovexattr" BPF sys_enter augmenter for "request_key"
Reusing "fremovexattr" BPF sys_enter augmenter for "inotify_add_watch"
Reusing "fremovexattr" BPF sys_enter augmenter for "mkdirat"
Reusing "fremovexattr" BPF sys_enter augmenter for "mknodat"
Reusing "fremovexattr" BPF sys_enter augmenter for "fchownat"
Reusing "fremovexattr" BPF sys_enter augmenter for "futimesat"
Reusing "fremovexattr" BPF sys_enter augmenter for "newfstatat"
Reusing "fremovexattr" BPF sys_enter augmenter for "unlinkat"
Reusing "fremovexattr" BPF sys_enter augmenter for "linkat"
Reusing "open" BPF sys_enter augmenter for "symlinkat"
Reusing "fremovexattr" BPF sys_enter augmenter for "readlinkat"
Reusing "fremovexattr" BPF sys_enter augmenter for "fchmodat"
Reusing "fremovexattr" BPF sys_enter augmenter for "faccessat"
Reusing "fremovexattr" BPF sys_enter augmenter for "utimensat"
Reusing "connect" BPF sys_enter augmenter for "accept4"
Reusing "fremovexattr" BPF sys_enter augmenter for "name_to_handle_at"
Reusing "fremovexattr" BPF sys_enter augmenter for "renameat2"
Reusing "open" BPF sys_enter augmenter for "memfd_create"
Reusing "fremovexattr" BPF sys_enter augmenter for "execveat"
Reusing "fremovexattr" BPF sys_enter augmenter for "statx"
TL;DR:
These are the new syscalls that can be augmented
Reusing "openat" BPF sys_enter augmenter for "open_tree"
Reusing "openat" BPF sys_enter augmenter for "openat2"
Reusing "openat" BPF sys_enter augmenter for "mount_setattr"
Reusing "openat" BPF sys_enter augmenter for "move_mount"
Reusing "open" BPF sys_enter augmenter for "fsopen"
Reusing "openat" BPF sys_enter augmenter for "fspick"
Reusing "openat" BPF sys_enter augmenter for "faccessat2"
Reusing "openat" BPF sys_enter augmenter for "fchmodat2"
as for the perf trace output:
before
perf $ perf trace -e faccessat2 --max-events=1
[no output]
after
perf $ ./perf trace -e faccessat2 --max-events=1
0.000 ( 0.037 ms): waybar/958 faccessat2(dfd: 40, filename: "uevent") = 0
P.S. The reason why this bug was not found in the past five years is
probably because it only happens to the newer syscalls whose id is
greater, for instance, faccessat2 of id 439, which not a lot of people
care about when using perf trace.
[Arnaldo]: notes
That and the fact that the BPF code was hidden before having to use -e,
that got changed kinda recently when we switched to using BPF skels for
augmenting syscalls in 'perf trace':
⬢[acme@toolbox perf-tools-next]$ git log --oneline tools/perf/util/bpf_skel/augmented_raw_syscalls.bpf.c
a9f4c6c999008c92 perf trace: Collect sys_nanosleep first argument
29d16de26df17e94 perf augmented_raw_syscalls.bpf: Move 'struct timespec64' to vmlinux.h
5069211e2f0b47e7 perf trace: Use the right bpf_probe_read(_str) variant for reading user data
33b725ce7b988756 perf trace: Avoid compile error wrt redefining bool
7d9642311b6d9d31 perf bpf augmented_raw_syscalls: Add an assert to make sure sizeof(augmented_arg->value) is a power of two.
262b54b6c9396823 perf bpf augmented_raw_syscalls: Add an assert to make sure sizeof(saddr) is a power of two.
1836480429d173c0 perf bpf_skel augmented_raw_syscalls: Cap the socklen parameter using &= sizeof(saddr)
cd2cece61ac5f900 perf trace: Tidy comments related to BPF + syscall augmentation
5e6da6be3082f77b perf trace: Migrate BPF augmentation to use a skeleton
⬢[acme@toolbox perf-tools-next]$
⬢[acme@toolbox perf-tools-next]$ git show --oneline --pretty=reference 5e6da6be3082f77b | head -1
5e6da6be3082f77b (perf trace: Migrate BPF augmentation to use a skeleton, 2023-08-10)
⬢[acme@toolbox perf-tools-next]$
I.e. from August, 2023.
One had as well to ask for BUILD_BPF_SKEL=1, which now is default if all
it needs is available on the system.
I simplified the code to not expose the 'struct syscall' outside of
tools/perf/util/syscalltbl.c, instead providing a function to go from
the index to the syscall id:
int syscalltbl__id_at_idx(struct syscalltbl *tbl, int idx);
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/lkml/ZmhlAxbVcAKoPTg8@x1
Link: https://lore.kernel.org/r/20240705132059.853205-2-howardchu95@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Various files had been missed from having accessor functions added for
the sake of dso reference count checking. Add the function calls and
missing dso accessor functions.
Fixes: ee756ef7491e ("perf dso: Add reference count checking and accessor functions")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240704011745.1021288-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
It is possible that memory events are not supported on all CPUs.
Prints a warning by dumping the enabled CPU maps in this case.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20240706152035.86983-3-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
A platform can have more than one Arm SPE PMU. For example, a system
with multiple clusters may have each cluster enabled with its own Arm
SPE instance. In such case, the PMU devices will be named 'arm_spe_0',
'arm_spe_1', and so on.
Currently, the tool only supports 'arm_spe_0'. This commit extends
support to multiple Arm SPE PMUs by detecting the substring 'arm_spe_'.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20240706152035.86983-2-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Change the unused var in 'arch/x86/entry/syscalls/syscalltbl.sh' to '_'
when reading from '$sorted_table'. This change allows the script to pass
tests of ShellCheck before and after version 0.7.2 at the same time.
When building in arch x86, syscalltbl.sh got a ShellCheck warning, which
makes compilation error:
In arch/x86/entry/syscalls/syscalltbl.sh line 27:
while read nr _abi name entry _compat; do
^-^ SC2034: abi appears unused.
Verify use (or export if used externally).
^----^ SC2034: compat appears unused.
Verify use (or export if used externally).
The script reads unused param abi and compat. It uses format '_xxx' to
indicate dummy vars, which won't work properly when ShellCheck <= 0.7.2.
According to SC2034, the more general way of writing is to use directly
'_' to indicate discarding vars. 'entry' is also replaced by '_' because
it just happens to be defined in emit function, otherwise it will lead
to some misunderstandings.
Link: https://www.shellcheck.net/wiki/SC2034
Signed-off-by: Haoze Xie <royenheart@gmail.com>
Signed-off-by: Yuan Tan <tanyuan@tinylab.org>
Link: https://lore.kernel.org/r/2143cab4cd8468c88860f4e5e382d0e6b4d89ac9.1720372178.git.royenheart@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Modified the object of 'memset' from '&lost.lost' to '&lost' in
record__read_lost_samples. This allows 'memset' to access memory properly
without causing out-of-bounds problems.
The problems got from builtin-record.c are:
In file included from /usr/include/string.h:495,
from util/parse-events.h:13,
from builtin-record.c:14:
In function 'memset',
inlined from 'record__read_lost_samples' at
builtin-record.c:1958:6,
inlined from '__cmd_record.constprop' at builtin-record.c:2817:2:
/usr/include/x86_64-linux-gnu/bits/string_fortified.h:71:10: error:
'__builtin_memset' offset [17, 64] from the object at 'lost' is out
of the bounds of referenced subobject 'lost' with type
'struct perf_record_lost_samples' at offset 0 [-Werror=array-bounds]
71|return __builtin___memset_chk (__dest,__ch,__len,__bos0 (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The error arised when performing a memset operation on the 'lost' variable,
the bytes of 'sizeof(lost)' exceeds that of '&lost.lost', which are 64
and 16.
Fixes: 6c1785cd75ef ("perf record: Ensure space for lost samples")
Signed-off-by: Haoze Xie <royenheart@gmail.com>
Signed-off-by: Yuan Tan <tanyuan@tinylab.org>
Link: https://lore.kernel.org/r/11e12f171b846577cac698cd3999db3d7f6c4d03.1720372317.git.royenheart@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The --fuzzy-name option can be used if fuzzy name matching is required.
For example, "taskname" can be matched to any string that contains
"taskname" as its substring.
Sample output for --task-name wdav --fuzzy-name
=============
. *A0 . . . . - . 131040.641346 secs A0 => wdavdaemon:62509
. A0 *B0 . . . - . 131040.641378 secs B0 => wdavdaemon:62274
. *- B0 . . . - . 131040.641379 secs
*C0 . B0 . . . . . 131040.641572 secs C0 => wdavdaemon:62283
C0 . B0 . *D0 . . . 131040.641572 secs D0 => wdavdaemon:62277
C0 . B0 . D0 . *E0 . 131040.641578 secs E0 => wdavdaemon:62270
*- . B0 . D0 . E0 . 131040.641581 secs
Suggested-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-and-tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Link: https://lore.kernel.org/r/20240707182716.22054-4-vineethr@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To track the scheduling patterns of multiple tasks simultaneously,
multiple task names can be specified using a comma separator
without any whitespace.
Sample output for --task-name perf,wdavdaemon
=============
. *A0 . . . . - . 131040.641346 secs A0 => wdavdaemon:62509
. A0 *B0 . . . - . 131040.641378 secs B0 => wdavdaemon:62274
. *- B0 . . . - . 131040.641379 secs
*C0 . B0 . . . . . 131040.641572 secs C0 => wdavdaemon:62283
...
. *- . . . . . . 131041.395649 secs
. . . . . . . *X2 131041.403969 secs X2 => perf:70211
. . . . . . . *- 131041.404006 secs
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-and-tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Chen Yu <yu.c.chen@intel.com>
Link: https://lore.kernel.org/r/20240707182716.22054-3-vineethr@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
By default, perf sched map prints sched-in events for all the tasks
which may not be required all the time as it prints lot of symbols
and rows to the terminal.
With --task-name option, one could specify the specific task name
for which the map has to be shown. This would help in analyzing the
CPU usage patterns easier for that specific task. Since multiple
PID's might have the same task name, using task-name filter
would be more useful for debugging.
For other tasks, instead of printing the symbol, '-' is printed and
the same '.' is used to represent idle. '-' is used instead of symbol
for other tasks because it helps in clear visualization of task
of interest and secondly the symbol itself doesn't mean anything
because the sched-in of that symbol will not be printed(first sched-in
contains pid and the corresponding symbol).
When using the --task-name option, the sched-out time is represented
by a '*-'. Since not all task sched-in events are printed, the sched-out
time of the relevant task might be lost. This representation ensures
that the sched-out time of the interested task is not overlooked.
6.10.0-rc1
==========
*A0 131040.639793 secs A0 => migration/0:19
*. 131040.639801 secs . => swapper:0
. *B0 131040.639830 secs B0 => migration/1:24
. *. 131040.639836 secs
. . *C0 131040.640108 secs C0 => migration/2:30
. . *. 131040.640163 secs
. . . *D0 131040.640386 secs D0 => migration/3:36
. . . *. 131040.640395 secs
6.10.0-rc1 + patch (--task-name wdavdaemon)
=============
. *A0 . . . . - . 131040.641346 secs A0 => wdavdaemon:62509
. A0 *B0 . . . - . 131040.641378 secs B0 => wdavdaemon:62274
- *- B0 . . . - . 131040.641379 secs
*C0 . B0 . . . . . 131040.641572 secs C0 => wdavdaemon:62283
C0 . B0 . *D0 . . . 131040.641572 secs D0 => wdavdaemon:62277
C0 . B0 . D0 . *E0 . 131040.641578 secs E0 => wdavdaemon:62270
*- . B0 . D0 . E0 . 131040.641581 secs
. . B0 . D0 . *- . 131040.641583 secs
Reviewed-and-tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Chen Yu <yu.c.chen@intel.com>
Link: https://lore.kernel.org/r/20240707182716.22054-2-vineethr@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.11
1. Add ParaVirt steal time support.
2. Add some VM migration enhancement.
3. Add perf kvm-stat support for loongarch.
|
|
This avoids reported warnings when the packages are not installed.
[namhyung]: Removed the dummy assignment and unnecessary ifeq checks.
Fixes: 0f0e1f445690 ("perf build: Use pkg-config for feature check for libtrace{event,fs}")
Signed-off-by: Guilherme Amadio <amadio@gentoo.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Thorsten Leemhuis <linux@leemhuis.info>
Link: https://lore.kernel.org/r/20240628203432.3273625-1-amadio@gentoo.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
