| Age | Commit message (Collapse) | Author |
|---|
|
The selftests GIC library presently does not support LPIs. Add a
userspace helper for configuring a redistributor for LPIs, installing
an LPI configuration table and LPI pending table.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-18-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
A prerequisite of testing LPI injection performance is of course
instantiating an ITS for the guest. Add a small library for creating an
ITS and interacting with it from the guest.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-17-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
It would appear that all of the selftests are using the same exact
layout for the GIC frames. Fold this back into the library
implementation to avoid defining magic values all over the selftests.
This is an extension of Colton's change, ripping out parameterization of
from the library internals in addition to the public interfaces.
Co-developed-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-15-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
There are a few subtle incongruencies between the GIC definitions used
by the kernel and selftests. Furthermore, the selftests header blends
implementation detail (e.g. default priority) with the architectural
definitions.
This is all rather annoying, since bulk imports of the kernel header
is not possible. Move selftests-specific definitions out of the
offending header and realign tests on the canonical definitions for
things like sysregs. Finally, haul in a fresh copy of the gicv3 header
to enable a forthcoming ITS selftest.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-14-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Allow the caller to set the initial state of the VM. Doing this
before sev_vm_launch() matters for SEV-ES, since that is the
place where the VMSA is updated and after which the guest state
becomes sealed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-17-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This removes the concept of "subtypes", instead letting the tests use proper
VM types that were recently added. While the sev_init_vm() and sev_es_init_vm()
are still able to operate with the legacy KVM_SEV_INIT and KVM_SEV_ES_INIT
ioctls, this is limited to VMs that are created manually with
vm_create_barebones().
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-16-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
With multiple reader threads POLLing a single UFFD, the demand paging test
suffers from the thundering herd problem: performance degrades as the
number of reader threads is increased. Solve this issue [1] by switching
the the polling mechanism to EPOLL + EPOLLEXCLUSIVE.
Also, change the error-handling convention of uffd_handler_thread_fn.
Instead of just printing errors and returning early from the polling
loop, check for them via TEST_ASSERT(). "return NULL" is reserved for a
successful exit from uffd_handler_thread_fn, i.e. one triggered by a
write to the exit pipe.
Performance samples generated by the command in [2] are given below.
Num Reader Threads, Paging Rate (POLL), Paging Rate (EPOLL)
1 249k 185k
2 201k 235k
4 186k 155k
16 150k 217k
32 89k 198k
[1] Single-vCPU performance does suffer somewhat.
[2] ./demand_paging_test -u MINOR -s shmem -v 4 -o -r <num readers>
Signed-off-by: Anish Moorthy <amoorthy@google.com>
Acked-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20240215235405.368539-13-amoorthy@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
paging test
At the moment, demand_paging_test does not support profiling/testing
multiple vCPU threads concurrently faulting on a single uffd because
(a) "-u" (run test in userfaultfd mode) creates a uffd for each vCPU's
region, so that each uffd services a single vCPU thread.
(b) "-u -o" (userfaultfd mode + overlapped vCPU memory accesses)
simply doesn't work: the test tries to register the same memory
to multiple uffds, causing an error.
Add support for many vcpus per uffd by
(1) Keeping "-u" behavior unchanged.
(2) Making "-u -a" create a single uffd for all of guest memory.
(3) Making "-u -o" implicitly pass "-a", solving the problem in (b).
In cases (2) and (3) all vCPU threads fault on a single uffd.
With potentially multiple vCPUs per UFFD, it makes sense to allow
configuring the number of reader threads per UFFD as well: add the "-r"
flag to do so.
Signed-off-by: Anish Moorthy <amoorthy@google.com>
Acked-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20240215235405.368539-12-amoorthy@google.com
[sean: fix kernel style violations, use calloc() for arrays]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
KVM x86 PMU changes for 6.9:
- Fix several bugs where KVM speciously prevents the guest from utilizing
fixed counters and architectural event encodings based on whether or not
guest CPUID reports support for the _architectural_ encoding.
- Fix a variety of bugs in KVM's emulation of RDPMC, e.g. for "fast" reads,
priority of VMX interception vs #GP, PMC types in architectural PMUs, etc.
- Add a selftest to verify KVM correctly emulates RDMPC, counter availability,
and a variety of other PMC-related behaviors that depend on guest CPUID,
i.e. are difficult to validate via KVM-Unit-Tests.
- Zero out PMU metadata on AMD if the virtual PMU is disabled to avoid wasting
cycles, e.g. when checking if a PMC event needs to be synthesized when
skipping an instruction.
- Optimize triggering of emulated events, e.g. for "count instructions" events
when skipping an instruction, which yields a ~10% performance improvement in
VM-Exit microbenchmarks when a vPMU is exposed to the guest.
- Tighten the check for "PMI in guest" to reduce false positives if an NMI
arrives in the host while KVM is handling an IRQ VM-Exit.
|
|
KVM selftests changes for 6.9:
- Add macros to reduce the amount of boilerplate code needed to write "simple"
selftests, and to utilize selftest TAP infrastructure, which is especially
beneficial for KVM selftests with multiple testcases.
- Add basic smoke tests for SEV and SEV-ES, along with a pile of library
support for handling private/encrypted/protected memory.
- Fix benign bugs where tests neglect to close() guest_memfd files.
|
|
Move vcpu_has_ext to the processor.c and rename it to __vcpu_has_ext
so that other test cases can use it for vCPU extension check.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Add guest_get_vcpuid() helper to simplify accessing to per-cpu
private data. The sscratch CSR was used to store the vcpu id.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Add the infrastructure for guest exception handling in riscv selftests.
Customized handlers can be enabled by vm_install_exception_handler(vector)
or vm_install_interrupt_handler().
The code is inspired from that of x86/arm64.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Extend sev_smoke_test to also run a minimal SEV-ES smoke test so that it's
possible to test KVM's unique VMRUN=>#VMEXIT path for SEV-ES guests
without needing a full blown SEV-ES capable VM, which requires a rather
absurd amount of properly configured collateral.
Punt on proper GHCB and ucall support, and instead use the GHCB MSR
protocol to signal test completion. The most important thing at this
point is to have _any_ kind of testing of KVM's __svm_sev_es_vcpu_run().
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Peter Gonda <pgonda@google.com>
Cc: Carlos Bilbao <carlos.bilbao@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a library/APIs for creating and interfacing with SEV guests, all of
which need some amount of common functionality, e.g. an open file handle
for the SEV driver (/dev/sev), ioctl() wrappers to pass said file handle
to KVM, tracking of the C-bit, etc.
Add an x86-specific hook to initialize address properties, a.k.a. the
location of the C-bit. An arch specific hook is rather gross, but x86
already has a dedicated #ifdef-protected kvm_get_cpu_address_width() hook,
i.e. the ugliest code already exists.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Originally-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add support for tagging and untagging guest physical address, e.g. to
allow x86's SEV and TDX guests to embed shared vs. private information in
the GPA. SEV (encryption, a.k.a. C-bit) and TDX (shared, a.k.a. S-bit)
steal bits from the guest's physical address space that is consumed by the
CPU metadata, i.e. effectively aliases the "real" GPA.
Implement generic "tagging" so that the shared vs. private metadata can be
managed by x86 without bleeding too many details into common code.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Originally-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Allocate the common ucall pool using vm_vaddr_alloc_shared() so that the
ucall structures will be placed in shared (unencrypted) memory for VMs
with support for protected (encrypted) memory, e.g. x86's SEV.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
[sean: massage changelog]
Link: https://lore.kernel.org/r/20240223004258.3104051-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Test programs may wish to allocate shared vaddrs for things like
sharing memory with the guest. Since protected vms will have their
memory encrypted by default an interface is needed to explicitly
request shared pages.
Implement this by splitting the common code out from vm_vaddr_alloc()
and introducing a new vm_vaddr_alloc_shared().
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Reviewed-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add support for differentiating between protected (a.k.a. private, a.k.a.
encrypted) memory and normal (a.k.a. shared) memory for VMs that support
protected guest memory, e.g. x86's SEV. Provide and manage a common
bitmap for tracking whether a given physical page resides in protected
memory, as support for protected memory isn't x86 specific, i.e. adding a
arch hook would be a net negative now, and in the future.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerley Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Reviewed-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Originally-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Make all sparsebit struct pointers "const" where appropriate. This will
allow adding a bitmap to track protected/encrypted physical memory that
tests can access in a read-only fashion.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerley Tng <ackerleytng@google.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
[sean: massage changelog]
Link: https://lore.kernel.org/r/20240223004258.3104051-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Carve out space in the @shape passed to the various VM creation helpers to
allow using the shape to control the subtype of VM, e.g. to identify x86's
SEV VMs (which are "regular" VMs as far as KVM is concerned).
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerley Tng <ackerleytng@google.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Extract the code to set a vCPU's entry point out of vm_arch_vcpu_add() and
into a new API, vcpu_arch_set_entry_point(). Providing a separate API
will allow creating a KVM selftests hardness that can handle tests that
use different entry points for sub-tests, whereas *requiring* the entry
point to be specified at vCPU creation makes it difficult to create a
generic harness, e.g. the boilerplate setup/teardown can't easily create
and destroy the VM and vCPUs.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-4-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
hyperv_clocksource_tsc_page too
KVM's 'gtod_is_based_on_tsc()' recognizes two clocksources: 'tsc' and
'hyperv_clocksource_tsc_page' and enables kvmclock in 'masterclock'
mode when either is in use. Transform 'sys_clocksource_is_tsc()' into
'sys_clocksource_is_based_on_tsc()' to support the later. This affects
two tests: kvm_clock_test and vmx_nested_tsc_scaling_test, both seem
to work well when system clocksource is 'hyperv_clocksource_tsc_page'.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-4-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Several existing x86 selftests need to check that the underlying system
clocksource is TSC or based on TSC but every test implements its own
check. As a first step towards unification, extract check_clocksource()
from kvm_clock_test and split it into two functions: arch-neutral
'sys_get_cur_clocksource()' and x86-specific 'sys_clocksource_is_tsc()'.
Fix a couple of pre-existing issues in kvm_clock_test: memory leakage in
check_clocksource() and using TEST_ASSERT() instead of TEST_REQUIRE().
The change also makes the test fail when system clocksource can't be read
from sysfs.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-2-vkuznets@redhat.com
[sean: eliminate if-elif pattern just to set a bool true]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add helpers to read integer module params, which is painfully non-trivial
because the pain of dealing with strings in C is exacerbated by the kernel
inserting a newline.
Don't bother differentiating between int, uint, short, etc. They all fit
in an int, and KVM (thankfully) doesn't have any integer params larger
than an int.
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-24-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a PMU library for x86 selftests to help eliminate open-coded event
encodings, and to reduce the amount of copy+paste between PMU selftests.
Use the new common macro definitions in the existing PMU event filter test.
Cc: Aaron Lewis <aaronlewis@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add vcpu_set_cpuid_property() helper function for setting properties, and
use it instead of open coding an equivalent for MAX_PHY_ADDR. Future vPMU
testcases will also need to stuff various CPUID properties.
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
open_path_or_exit() is used for '/dev/kvm', '/dev/sev', and
'/sys/module/%s/parameters/%s' and skipping test when the entry is missing
is completely reasonable. Other errors, however, may indicate a real issue
which is easy to miss. E.g. when 'hyperv_features' test was entering an
infinite loop the output was:
./hyperv_features
Testing access to Hyper-V specific MSRs
1..0 # SKIP - /dev/kvm not available (errno: 24)
and this can easily get overlooked.
Keep ENOENT case 'special' for skipping tests and fail when open() results
in any other errno.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240129085847.2674082-2-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
TEST_* functions append their own newline. Remove newlines from
TEST_* callsites to avoid extra newlines in output.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231206170241.82801-12-ajones@ventanamicro.com
[sean: keep the newline in the "tsc\n" strncmp()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
TEST_* functions append their own newline. Remove newlines from
TEST_* callsites to avoid extra newlines in output.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20231206170241.82801-11-ajones@ventanamicro.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
TEST_* functions append their own newline. Remove newlines from
TEST_* callsites to avoid extra newlines in output.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20231206170241.82801-10-ajones@ventanamicro.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
TEST_* functions append their own newline. Remove newlines from
TEST_* callsites to avoid extra newlines in output.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20231206170241.82801-9-ajones@ventanamicro.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
TEST_* functions append their own newline. Remove newlines from
TEST_* callsites to avoid extra newlines in output.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231206170241.82801-8-ajones@ventanamicro.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 6.8
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB
base granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with
a prefix branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV
support to that version of the architecture.
- A small set of vgic fixes and associated cleanups.
|
|
KVM/riscv changes for 6.8 part #1
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Steal time account support along with selftest
|
|
Add guest_sbi_probe_extension(), allowing guest code to probe for
SBI extensions. As guest_sbi_probe_extension() needs
SBI_ERR_NOT_SUPPORTED, take the opportunity to bring in all SBI
error codes. We don't bring in all current extension IDs or base
extension function IDs though, even though we need one of each,
because we'd prefer to bring those in as necessary.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
sbi_ecall() isn't ucall specific and its prototype is already in
processor.h. Move its implementation to processor.c.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
While adding RISCV_SBI_EXT_REG(), acknowledge that some registers
have subtypes and extend __kvm_reg_id() to take a subtype field.
Then, update all macros to set the new field appropriately. The
general CSR macro gets renamed to include "GENERAL", but the other
macros, like the new RISCV_SBI_EXT_REG, just use the SINGLE subtype.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Add yet another macro to the VM/vCPU ioctl() framework to detect when an
ioctl() failed because KVM killed/bugged the VM, i.e. when there was
nothing wrong with the ioctl() itself. If KVM kills a VM, e.g. by way of
a failed KVM_BUG_ON(), all subsequent VM and vCPU ioctl()s will fail with
-EIO, which can be quite misleading and ultimately waste user/developer
time.
Use KVM_CHECK_EXTENSION on KVM_CAP_USER_MEMORY to detect if the VM is
dead and/or bug, as KVM doesn't provide a dedicated ioctl(). Using a
heuristic is obviously less than ideal, but practically speaking the logic
is bulletproof barring a KVM change, and any such change would arguably
break userspace, e.g. if KVM returns something other than -EIO.
Without the detection, tearing down a bugged VM yields a cryptic failure
when deleting memslots:
==== Test Assertion Failure ====
lib/kvm_util.c:689: !ret
pid=45131 tid=45131 errno=5 - Input/output error
1 0x00000000004036c3: __vm_mem_region_delete at kvm_util.c:689
2 0x00000000004042f0: kvm_vm_free at kvm_util.c:724 (discriminator 12)
3 0x0000000000402929: race_sync_regs at sync_regs_test.c:193
4 0x0000000000401cab: main at sync_regs_test.c:334 (discriminator 6)
5 0x0000000000416f13: __libc_start_call_main at libc-start.o:?
6 0x000000000041855f: __libc_start_main_impl at ??:?
7 0x0000000000401d40: _start at ??:?
KVM_SET_USER_MEMORY_REGION failed, rc: -1 errno: 5 (Input/output error)
Which morphs into a more pointed error message with the detection:
==== Test Assertion Failure ====
lib/kvm_util.c:689: false
pid=80347 tid=80347 errno=5 - Input/output error
1 0x00000000004039ab: __vm_mem_region_delete at kvm_util.c:689 (discriminator 5)
2 0x0000000000404660: kvm_vm_free at kvm_util.c:724 (discriminator 12)
3 0x0000000000402ac9: race_sync_regs at sync_regs_test.c:193
4 0x0000000000401cb7: main at sync_regs_test.c:334 (discriminator 6)
5 0x0000000000418263: __libc_start_call_main at libc-start.o:?
6 0x00000000004198af: __libc_start_main_impl at ??:?
7 0x0000000000401d90: _start at ??:?
KVM killed/bugged the VM, check the kernel log for clues
Suggested-by: Michal Luczaj <mhal@rbox.co>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Colton Lewis <coltonlewis@google.com>
Link: https://lore.kernel.org/r/20231108010953.560824-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add support for VM_MODE_P52V48_4K and VM_MODE_P52V48_16K guest modes by
using the FEAT_LPA2 pte format for stage1, when FEAT_LPA2 is available.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231127111737.1897081-13-ryan.roberts@arm.com
|
|
We are about to add 52 bit PA guest modes for 4K and 16K pages when the
system supports LPA2. In preparation beef up the logic that parses mmfr0
to also tell us what the maximum supported PA size is for each page
size. Max PA size = 0 implies the page size is not supported at all.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231127111737.1897081-12-ryan.roberts@arm.com
|
|
Add helpers to invoke KVM_SET_USER_MEMORY_REGION2 directly so that tests
can validate of features that are unique to "version 2" of "set user
memory region", e.g. do negative testing on gmem_fd and gmem_offset.
Provide a raw version as well as an assert-success version to reduce
the amount of boilerplate code need for basic usage.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-33-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a "vm_shape" structure to encapsulate the selftests-defined "mode",
along with the KVM-defined "type" for use when creating a new VM. "mode"
tracks physical and virtual address properties, as well as the preferred
backing memory type, while "type" corresponds to the VM type.
Taking the VM type will allow adding tests for KVM_CREATE_GUEST_MEMFD
without needing an entirely separate set of helpers. At this time,
guest_memfd is effectively usable only by confidential VM types in the
form of guest private memory, and it's expected that x86 will double down
and require unique VM types for TDX and SNP guests.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-30-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add helpers to convert memory between private and shared via KVM's
memory attributes, as well as helpers to free/allocate guest_memfd memory
via fallocate(). Userspace, i.e. tests, is NOT required to do fallocate()
when converting memory, as the attributes are the single source of truth.
Provide allocate() helpers so that tests can mimic a userspace that frees
private memory on conversion, e.g. to prioritize memory usage over
performance.
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-28-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add support for creating "private" memslots via KVM_CREATE_GUEST_MEMFD and
KVM_SET_USER_MEMORY_REGION2. Make vm_userspace_mem_region_add() a wrapper
to its effective replacement, vm_mem_add(), so that private memslots are
fully opt-in, i.e. don't require update all tests that add memory regions.
Pivot on the KVM_MEM_PRIVATE flag instead of the validity of the "gmem"
file descriptor so that simple tests can let vm_mem_add() do the heavy
lifting of creating the guest memfd, but also allow the caller to pass in
an explicit fd+offset so that fancier tests can do things like back
multiple memslots with a single file. If the caller passes in a fd, dup()
the fd so that (a) __vm_mem_region_delete() can close the fd associated
with the memory region without needing yet another flag, and (b) so that
the caller can safely close its copy of the fd without having to first
destroy memslots.
Co-developed-by: Ackerley Tng <ackerleytng@google.com>
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-27-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use KVM_SET_USER_MEMORY_REGION2 throughout KVM's selftests library so that
support for guest private memory can be added without needing an entirely
separate set of helpers.
Note, this obviously makes selftests backwards-incompatible with older KVM
versions from this point forward.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-26-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Drop kvm_userspace_memory_region_find(), it's unused and a terrible API
(probably why it's unused). If anything outside of kvm_util.c needs to
get at the memslot, userspace_mem_region_find() can be exposed to give
others full access to all memory region/slot information.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-25-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.7
- Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its guest
- Optimization for vSGI injection, opportunistically compressing MPIDR
to vCPU mapping into a table
- Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
- Guest support for memory operation instructions (FEAT_MOPS)
- Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
- Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
- Load the stage-2 MMU context at vcpu_load() for VHE systems, reducing
the overhead of errata mitigations
- Miscellaneous kernel and selftest fixes
|
|
The users of sysreg.h (perf, KVM selftests) are now generating the
necessary sysreg-defs.h; sync sysreg.h with the kernel sources and
fix the KVM selftests that use macros which suffered a rename.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231011195740.3349631-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Delete inaccurate descriptions and obsolete metadata for test cases.
It adds zero value, and has a non-zero chance of becoming stale and
misleading in the future. No functional changes intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20230914094803.94661-1-likexu@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
