| Age | Commit message (Collapse) | Author |
|---|
|
Remove duplicate headers which are included twice.
Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
All callers of mftb() expect 'unsigned long', and the function itself
only returns lower part of the TB so it really is 'unsigned long'
not 'unsigned long long'
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
A new self test that forces MSR[TS] to be set without calling any TM
instruction. This test also tries to cause a page fault at a signal
handler, exactly between MSR[TS] set and tm_recheckpoint(), forcing
thread->texasr to be rewritten with TEXASR[FS] = 0, which will cause a BUG
when tm_recheckpoint() is called.
This test is not deterministic, since it is hard to guarantee that the page
access will cause a page fault. In order to force more page faults at
signal context, the signal handler and the ucontext are being mapped into a
MADV_DONTNEED memory chunks.
Tests have shown that the bug could be exposed with few interactions in a
buggy kernel. This test is configured to loop 5000x, having a good chance
to hit the kernel issue in just one run. This self test takes less than
two seconds to run.
This test uses set/getcontext because the kernel will recheckpoint
zeroed structures, causing the test to segfault, which is undesired because
the test needs to rerun, so, there is a signal handler for SIGSEGV which
will restart the test.
v2: Uses the MADV_DONTNEED memory advice
v3: Fix memcpy and 32-bits compilation
v4: Does not define unused macros
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This is a new test case that creates a signal and starts a suspended
transaction inside the signal handler.
It returns from the signal handler with the CPU at suspended state, but
without setting user context MSR Transaction State (TS) field.
The kernel signal handler code should be able to handle this discrepancy
instead of crashing.
This code could be compiled and used to test 32 and 64-bits signal
handlers.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Current core-pkey selftest fails if the test runs without privileges to
write into the core pattern file (/proc/sys/kernel/core_pattern). This
causes the test to fail and give the impression that the subsystem being
tested is broken, when, in fact, the test is being executed without the
proper privileges. This is the current error:
test: core_pkey
tags: git_version:v4.19-3-g9e3363be9bce-dirty
Error writing to core_pattern file: Permission denied
failure: core_pkey
This patch simply skips this test if it runs without the proper privileges,
avoiding this undesired failure.
CC: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
CC: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This patch creates a new macro that skips a test and prints a message to
stderr. This is useful to give an idea why the tests is being skipped,
other than just skipping the test blindly.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Some ptrace selftests are passing input operands using a constraint that
can allocate any register for the operand, and using these registers on
load/store operations.
If the register allocated by the compiler happens to be zero (r0), it might
cause an invalid memory address access, since load and store operations
consider the content of 0x0 address if the base register is r0, instead of
the content of the r0 register. For example:
r1 := 0xdeadbeef
r0 := 0xdeadbeef
ld r2, 0(1) /* will load into r2 the content of r1 address */
ld r2, 0(0) /* will load into r2 the content of 0x0 */
In order to avoid this possible problem, the inline assembly constraint
should be aware that these registers will be used as a base register, thus,
r0 should not be allocated.
Other than that, this patch removes inline assembly operands that are not
used by the tests.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Currently the selftest wild_bctr can fail to build when an old gcc is
used, notably on gcc using a binutils version <= 2.27, because the
assembler does not support the integer suffix UL.
This patch adjusts the wild_bctr test so the REG_POISON value is still
treated as an unsigned long for the shifts on compilation but the UL
suffix is absent on the stringification, so the inline asm code
generated has no UL suffixes.
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
[mpe: Wrap long line]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The selftest I recently added to test branching to an out-of-bounds
NIP doesn't work on 64-bit big endian. It does fail but not in the
right way. That is it SEGVs trying to load from the opd at BAD_NIP,
but it never gets as far as branching to BAD_NIP.
To fix it we need to create an opd which is reachable but which holds
the bad address.
Fixes: b7683fc66eba ("selftests/powerpc: Add a test of wild bctr")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
We are using 'dscr_insn' as a label in inline asm to identify if a
SIGILL was generated by the mtspr instruction at that point. However,
with inline assembly, the compiler is still free to duplicate the asm
statement for optimization purposes, which results in the label being
defined twice with the error:
/tmp/ccerQCql.s:874: Error: symbol `dscr_insn' is already defined
With different compiler versions, we may also see:
/tmp/ccJzLDlN.o:(.toc+0x0): undefined reference to `dscr_insn'
Remove the use of the label in the inline assembly. Instead, just look
for the offending instruction in the signal handler.
Fixes: d2bf793237b3 ("selftests/powerpc: Add test to verify rfi flush across a system call")
Reported-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Use TEST_GEN_PROGS and don't redefine all, this makes the out-of-tree
build work. We need to move the extra dependencies below the include
of lib.mk, because it adds the $(OUTPUT) prefix if it's defined.
We can also drop the clean rule, lib.mk does it for us.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
For the out-of-tree build to work we need to tell switch_endian_test
to look for check-reversed.S in $(OUTPUT).
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
When running the ebb tests after building on a ppc64le Ubuntu machine:
$ pmu/ebb/reg_access_test: error while loading shared libraries:
R_PPC64_ADDR16_HI reloc at 0x000000013a965130 for symbol `' out of
range
This is because the Ubuntu toolchain builds has PIE enabled by default.
Change it to be always off instead.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
We should use TEST_GEN_PROGS, not TEST_PROGS. That tells the selftests
makefile (lib.mk) that those tests are generated (built), and so it
adds the $(OUTPUT) prefix for us, making the out-of-tree build work
correctly.
It also means we don't need our own clean rule, lib.mk does it.
We also have to update the signal_tm rule to use $(OUTPUT).
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
We should use TEST_GEN_PROGS, not TEST_PROGS. That tells the selftests
makefile (lib.mk) that those tests are generated (built), and so it
adds the $(OUTPUT) prefix for us, making the out-of-tree build work
correctly.
It also means we don't need our own clean rule, lib.mk does it.
We also have to update the ptrace-pkey and core-pkey rules to use
$(OUTPUT).
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
typing 'make' inside tools/testing/selftests/powerpc gave a build
warning:
BUILD_TARGET=tools/testing/selftests/powerpc/security; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C security all
make[1]: Entering directory 'tools/testing/selftests/powerpc/security'
../../lib.mk:20: ../../../../scripts/subarch.include: No such file or directory
make[1]: *** No rule to make target '../../../../scripts/subarch.include'.
make[1]: Failed to remake makefile '../../../../scripts/subarch.include'.
The build is one level deeper than lib.mk thinks it is. Set top_srcdir
to set things straight.
Note that the test program is still built.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
When running the rfi_flush test, if the system is loaded, we see two
issues:
1. The L1d misses when rfi_flush is disabled increase significantly due
to other workloads interfering with the cache.
2. The L1d misses when rfi_flush is enabled sometimes goes slightly
below the expected number of misses.
To address these, let's relax the expected number of L1d misses:
1. When rfi_flush is disabled, we allow upto half the expected number of
the misses for when rfi_flush is enabled.
2. When rfi_flush is enabled, we allow ~1% lower number of cache misses.
Reported-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Test ptrace-tm-spd-gpr fails on current kernel (4.19) due to a segmentation
fault that happens on the child process prior to setting cptr[2] = 1. This
causes the parent process to wait forever at 'while (!pptr[2])' and the test to
be killed by the test harness framework by timeout, thus, failing.
The segmentation fault happens because of a inline assembly being
generated as:
0x10000355c <tm_spd_gpr+492> lfs f0, 0(0)
This is reading memory position 0x0 and causing the segmentation fault.
This code is being generated by ASM_LOAD_FPR_SINGLE_PRECISION(flt_4), where
flt_4 is passed to the inline assembly block as:
[flt_4] "r" (&d)
Since the inline assembly 'r' constraint means any GPR, gpr0 is being
chosen, thus causing this issue when issuing a Load Floating-Point Single
instruction.
This patch simply changes the constraint to 'b', which specify that this
register will be used as base, and r0 is not allowed to be used, avoiding
this issue.
Other than that, removing flt_2 register from the input operands, since it
is not used by the inline assembly code at all.
Cc: stable@vger.kernel.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This reverts commit d8a2fe29d3c97038c8efcc328d5e7940c5310565.
That commit, by me, fixed the out of tree build errors by causing some
of the tests not to build at all.
|
|
This tests that a bctr (Branch to counter and link), ie. a function
call, to a wildly out-of-bounds address is handled correctly.
Some old kernel versions didn't handle it correctly, see eg:
"powerpc/slb: Force a full SLB flush when we insert for a bad EA"
https://lists.ozlabs.org/pipermail/linuxppc-dev/2017-April/157397.html
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Some of our Makefiles don't do the right thing when building the
selftests with O=, fix them up.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This adds a test to verify proper functioning of the rfi flush
capability implemented to mitigate meltdown. The test works by
measuring the number of L1d cache misses encountered while loading
data from memory. Across a system call, since the L1d cache is flushed
when rfi_flush is enabled, the number of cache misses is expected to
be relative to the number of cachelines corresponding to the data
being loaded.
The current system setting is reflected via powerpc/rfi_flush under
debugfs (assumed to be /sys/kernel/debug/). This test verifies the
expected result with rfi_flush enabled as well as when it is disabled.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Add SPDX tags, clang format, skip if the debugfs is missing, use
__u64 and SANE_USERSPACE_TYPES to avoid printf() build errors.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
... so that it can be used by others.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Merge our fixes branch. It has a few important fixes that are needed for
futher testing and also some commits that will conflict with content in
next.
|
|
This patch adds a new test for the new PTRACE_SYSEMU ptrace request.
This test also relies on PTRACE_GETREGS and PTRACE_SETREGS requests to
run properly, since the trace instruction (gettid() syscall) is being
modified at run-time (by PTRACE_SETREGS) and re-executed three times.
PTRACE_GETREGS is being used to check that the registers are still
sane.
This test basically creates a child process that executes syscalls
and the parent process check if it is being traced appropriately. The
parent process guarantees that the SYSCALLs are being traced, with
PTRACE_SYSEMU, and ptrace stops the child application before a syscall is
executed. The way the tests validates it, is by guaranteeing that the
system calls arguments, as argv[0] (r3) which is the same register that
will have the syscall return value on powerpc, are not being corrupted on
PTRACE_SYSEMU with a return value, i.e, it continues to have the current
arguments instead, meaning that the registers where not clobbered.
This test is basically the same test for x86 located at
tools/testing/selftests/x86/ptrace_syscall.c, limited to test PTRACE_SYSEMU
request, and ported to PowerPC.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Commit b2d35fa5fc80 ("selftests: add headers_install to lib.mk")
introduced a requirement that Makefiles more than one level below the
selftests directory need to define top_srcdir, but it didn't update
any of the powerpc Makefiles.
This broke building all the powerpc selftests with eg:
make[1]: Entering directory '/src/linux/tools/testing/selftests/powerpc'
BUILD_TARGET=/src/linux/tools/testing/selftests/powerpc/alignment; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C alignment all
make[2]: Entering directory '/src/linux/tools/testing/selftests/powerpc/alignment'
../../lib.mk:20: ../../../../scripts/subarch.include: No such file or directory
make[2]: *** No rule to make target '../../../../scripts/subarch.include'.
make[2]: Failed to remake makefile '../../../../scripts/subarch.include'.
Makefile:38: recipe for target 'alignment' failed
Fix it by setting top_srcdir in the affected Makefiles.
Fixes: b2d35fa5fc80 ("selftests: add headers_install to lib.mk")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
There are cases where the test is not expecting to have the transaction
aborted, but, the test process might have been rescheduled, either in the
OS level or by KVM (if it is running on a KVM guest machine). The process
reschedule will cause a treclaim/recheckpoint which will cause the
transaction to doom, aborting the transaction as soon as the process is
rescheduled back to the CPU. This might cause the test to fail, but this is
not a failure in essence.
If that is the case, TEXASR[FC] is indicated with either
TM_CAUSE_RESCHEDULE or TM_CAUSE_KVM_RESCHEDULE for KVM interruptions.
In this scenario, ignore these two failures and avoid the whole test to
return failure.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Gustavo Romero <gromero@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Test tm-tmspr might exit before all threads stop executing, because it just
waits for the very last thread to join before proceeding/exiting.
This patch makes sure that all threads that were created will join before
proceeding/exiting.
This patch also guarantees that the amount of threads being created is equal
to thread_num.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
There are some powerpc selftests, as tm/tm-unavailable, that run for a long
period (>120 seconds), and if it is interrupted, as pressing CRTL-C
(SIGINT), the foreground process (harness) dies but the child process and
threads continue to execute (with PPID = 1 now) in background.
In this case, you'd think the whole test exited, but there are remaining
threads and processes being executed in background. Sometimes these
zombies processes are doing annoying things, as consuming the whole CPU or
dumping things to STDOUT.
This patch fixes this problem by attaching an empty signal handler to
SIGINT in the harness process. This handler will interrupt (EINTR) the
parent process waitpid() call, letting the code to follow through the
normal flow, which will kill all the processes in the child process group.
This patch also fixes a typo.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This adds a set of test cases to test the behaviour of
copy_tofrom_user when exceptions are encountered accessing the
source or destination. Currently, copy_tofrom_user does not always
copy as many bytes as possible when an exception occurs on a store
to the destination, and that is reflected in failures in these tests.
Based on a test program from Anton Blanchard.
[paulus@ozlabs.org - test all three paths, wrote commit description,
made EX_TABLE create an exception table.]
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The hand-coded assembler 64-bit copy routines include feature sections
that select one code path or another depending on which CPU we are
executing on. The self-tests for these copy routines end up testing
just one path. This adds a mechanism for selecting any desired code
path at compile time, and makes 2 or 3 versions of each test, each
using a different code path, so as to cover all the possible paths.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
[mpe: Add -mcpu=power4 to CFLAGS for older compilers]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The alignment_handler is documented to only work on Power8/Power9, but
we can make it run on older CPUs by guarding more of the tests with
feature checks.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
|
|
Currently the alignment_handler test prints "Can't open /dev/fb0"
about 80 times per run, which is a little annoying.
Refactor it to check earlier if it can open /dev/fb0 and skip if not,
this results in each test printing something like:
test: test_alignment_handler_vsx_206
tags: git_version:v4.18-rc3-134-gfb21a48904aa
[SKIP] Test skipped on line 291
skip: test_alignment_handler_vsx_206
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
|
|
for PPC32
This patch adds a test for testing the new assembly strlen() for PPC32
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Fix 64-bit build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This patch adds a test for strlen()
string.c contains a copy of strlen() from lib/string.c
The test first tests the correctness of strlen() by comparing
the result with libc strlen(). It tests all cases of alignment.
It them tests the duration of an aligned strlen() on a 4 bytes string,
on a 16 bytes string and on a 256 bytes string.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Drop change log from copy of string.c]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This patch renames memcmp test to memcmp_64 and adds a memcmp_32 test
for testing the 32 bits version of memcmp()
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Fix 64-bit build by adding build_32bit test]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Some of these long running tests can time out on heavily loaded
systems, give them longer to run.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
These tests are currently failing on (some) big endian systems. Until
we can fix that, skip them unless we're on ppc64le.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Some of our selftests have only been tested on ppc64le and crash or
behave weirdly on ppc64/ppc32. So add a helper for checking the UTS
machine.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
files not using feature fixup don't need asm/feature-fixups.h
files using feature fixup need asm/feature-fixups.h
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This patch moves ASM_CONST() and stringify_in_c() into
dedicated asm-const.h, then cleans all related inclusions.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: asm-compat.h should include asm-const.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This patch reworked selftest memcmp_64 so that memcmp selftest can
cover more test cases.
It adds testcases for:
- memcmp over 4K bytes size.
- s1/s2 with different/random offset on 16 bytes boundary.
- enter/exit_vmx_ops pairness.
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
[mpe: Add -maltivec to fix build on some toolchains]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The test case assumes execute-permissions of unallocated keys are
enabled by default, which is incorrect.
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Only when the key is allocated, its permission are enabled.
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This logic was shared between multiple tests, but now that we have
removed all but one of them we can just move it into that test.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Paste on POWER9 only works to accelerators and not on real memory. So
these tests just generate a SIGILL.
So just delete them.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This is a test of the ISA 3.0 "copy" instruction. That instruction has
an L field, which if set to 1 specifies that "the instruction
identifies the beginning of a move group" (pp 858). That's also
referred to as "copy first" vs "copy".
In ISA 3.0B the copy instruction does not have an L field, and the
corresponding bit in the instruction must be set to 1.
This test is generating a "copy" instruction, not a "copy first", and
so on Power9 (which implements 3.0B), this results in an illegal
instruction.
So just drop the test entirely. We still have copy_first_unaligned to
test the "copy first" behaviour.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Fix two typos in the file header. Replacing the word 'priviledged'
by 'privileged' and 'exuecuted' by 'executed'.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
There is a buffer overflow in dscr_inherit_test.c test. In main(), strncpy()'s
third argument is the length of the source, not the size of the destination
buffer, which makes strncpy() behaves like strcpy(), causing a buffer overflow
if argv[0] is bigger than LEN_MAX (100).
This patch maps 'prog' to the argv[0] memory region, removing the static
allocation and the LEN_MAX size restriction.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This tests perf hardware breakpoints (ie PERF_TYPE_BREAKPOINT) on
powerpc.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
