| Age | Commit message (Collapse) | Author |
|---|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc8).
Conflicts:
tools/testing/selftests/net/.gitignore
252e01e68241 ("selftests: net: add netlink-dumps to .gitignore")
be43a6b23829 ("selftests: ncdevmem: Move ncdevmem under drivers/net/hw")
https://lore.kernel.org/all/20241113122359.1b95180a@canb.auug.org.au/
drivers/net/phy/phylink.c
671154f174e0 ("net: phylink: ensure PHY momentary link-fails are handled")
7530ea26c810 ("net: phylink: remove "using_mac_select_pcs"")
Adjacent changes:
drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
5b366eae7193 ("stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines")
e96321fad3ad ("net: ethernet: Switch back to struct platform_driver::remove()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth.
Quite calm week. No new regression under investigation.
Current release - regressions:
- eth: revert "igb: Disable threaded IRQ for igb_msix_other"
Current release - new code bugs:
- bluetooth: btintel: direct exception event to bluetooth stack
Previous releases - regressions:
- core: fix data-races around sk->sk_forward_alloc
- netlink: terminate outstanding dump on socket close
- mptcp: error out earlier on disconnect
- vsock: fix accept_queue memory leak
- phylink: ensure PHY momentary link-fails are handled
- eth: mlx5:
- fix null-ptr-deref in add rule err flow
- lock FTE when checking if active
- eth: dwmac-mediatek: fix inverted handling of mediatek,mac-wol
Previous releases - always broken:
- sched: fix u32's systematic failure to free IDR entries for hnodes.
- sctp: fix possible UAF in sctp_v6_available()
- eth: bonding: add ns target multicast address to slave device
- eth: mlx5: fix msix vectors to respect platform limit
- eth: icssg-prueth: fix 1 PPS sync"
* tag 'net-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
net: sched: u32: Add test case for systematic hnode IDR leaks
selftests: bonding: add ns multicast group testing
bonding: add ns target multicast address to slave device
net: ti: icssg-prueth: Fix 1 PPS sync
stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines
net: Make copy_safe_from_sockptr() match documentation
net: stmmac: dwmac-mediatek: Fix inverted handling of mediatek,mac-wol
ipmr: Fix access to mfc_cache_list without lock held
samples: pktgen: correct dev to DEV
net: phylink: ensure PHY momentary link-fails are handled
mptcp: pm: use _rcu variant under rcu_read_lock
mptcp: hold pm lock when deleting entry
mptcp: update local address flags when setting it
net: sched: cls_u32: Fix u32's systematic failure to free IDR entries for hnodes.
MAINTAINERS: Re-add cancelled Renesas driver sections
Revert "igb: Disable threaded IRQ for igb_msix_other"
Bluetooth: btintel: Direct exception event to bluetooth stack
Bluetooth: hci_core: Fix calling mgmt_device_connected
virtio/vsock: Improve MSG_ZEROCOPY error handling
vsock: Fix sk_error_queue memory leak
...
|
|
Add selftest cases for IOMMU_IOAS_CHANGE_PROCESS.
Link: https://patch.msgid.link/r/1731527497-16091-5-git-send-email-steven.sistare@oracle.com
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Fix the bug of some functions were missing return values.
Fixes: eff3c558bb7e ("netfilter: ctnetlink: support filtering by zone")
Signed-off-by: Guan Jing <guanjing@cmss.chinamobile.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Compiled binary files should be added to .gitignore
'git status' complains:
Untracked files:
(use "git add <file>..." to include in what will be committed)
net/netfilter/conntrack_reverse_clash
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
* for-next/pkey-signal:
: Bring arm64 pkey signal delivery in line with the x86 behaviour
selftests/mm: Fix unused function warning for aarch64_write_signal_pkey()
selftests/mm: Define PKEY_UNRESTRICTED for pkey_sighandler_tests
selftests/mm: Enable pkey_sighandler_tests on arm64
selftests/mm: Use generic pkey register manipulation
arm64: signal: Remove unused macro
arm64: signal: Remove unnecessary check when saving POE state
arm64: signal: Improve POR_EL0 handling to avoid uaccess failures
firmware: arm_sdei: Fix the input parameter of cpuhp_remove_state()
Revert "kasan: Disable Software Tag-Based KASAN with GCC"
kasan: Fix Software Tag-Based KASAN with GCC
kasan: Disable Software Tag-Based KASAN with GCC
Documentation/protection-keys: add AArch64 to documentation
arm64: set POR_EL0 for kernel threads
# Conflicts:
# arch/arm64/kernel/signal.c
|
|
'for-next/tlb', 'for-next/misc', 'for-next/mte', 'for-next/sysreg', 'for-next/stacktrace', 'for-next/hwcap3', 'for-next/kselftest', 'for-next/crc32', 'for-next/guest-cca', 'for-next/haft' and 'for-next/scs', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf: Switch back to struct platform_driver::remove()
perf: arm_pmuv3: Add support for Samsung Mongoose PMU
dt-bindings: arm: pmu: Add Samsung Mongoose core compatible
perf/dwc_pcie: Fix typos in event names
perf/dwc_pcie: Add support for Ampere SoCs
ARM: pmuv3: Add missing write_pmuacr()
perf/marvell: Marvell PEM performance monitor support
perf/arm_pmuv3: Add PMUv3.9 per counter EL0 access control
perf/dwc_pcie: Convert the events with mixed case to lowercase
perf/cxlpmu: Support missing events in 3.1 spec
perf: imx_perf: add support for i.MX91 platform
dt-bindings: perf: fsl-imx-ddr: Add i.MX91 compatible
drivers perf: remove unused field pmu_node
* for-next/gcs: (42 commits)
: arm64 Guarded Control Stack user-space support
kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
arm64/gcs: Fix outdated ptrace documentation
kselftest/arm64: Ensure stable names for GCS stress test results
kselftest/arm64: Validate that GCS push and write permissions work
kselftest/arm64: Enable GCS for the FP stress tests
kselftest/arm64: Add a GCS stress test
kselftest/arm64: Add GCS signal tests
kselftest/arm64: Add test coverage for GCS mode locking
kselftest/arm64: Add a GCS test program built with the system libc
kselftest/arm64: Add very basic GCS test program
kselftest/arm64: Always run signals tests with GCS enabled
kselftest/arm64: Allow signals tests to specify an expected si_code
kselftest/arm64: Add framework support for GCS to signal handling tests
kselftest/arm64: Add GCS as a detected feature in the signal tests
kselftest/arm64: Verify the GCS hwcap
arm64: Add Kconfig for Guarded Control Stack (GCS)
arm64/ptrace: Expose GCS via ptrace and core files
arm64/signal: Expose GCS state in signal frames
arm64/signal: Set up and restore the GCS context for signal handlers
arm64/mm: Implement map_shadow_stack()
...
* for-next/probes:
: Various arm64 uprobes/kprobes cleanups
arm64: insn: Simulate nop instruction for better uprobe performance
arm64: probes: Remove probe_opcode_t
arm64: probes: Cleanup kprobes endianness conversions
arm64: probes: Move kprobes-specific fields
arm64: probes: Fix uprobes for big-endian kernels
arm64: probes: Fix simulate_ldr*_literal()
arm64: probes: Remove broken LDR (literal) uprobe support
* for-next/asm-offsets:
: arm64 asm-offsets.c cleanup (remove unused offsets)
arm64: asm-offsets: remove PREEMPT_DISABLE_OFFSET
arm64: asm-offsets: remove DMA_{TO,FROM}_DEVICE
arm64: asm-offsets: remove VM_EXEC and PAGE_SZ
arm64: asm-offsets: remove MM_CONTEXT_ID
arm64: asm-offsets: remove COMPAT_{RT_,SIGFRAME_REGS_OFFSET
arm64: asm-offsets: remove VMA_VM_*
arm64: asm-offsets: remove TSK_ACTIVE_MM
* for-next/tlb:
: TLB flushing optimisations
arm64: optimize flush tlb kernel range
arm64: tlbflush: add __flush_tlb_range_limit_excess()
* for-next/misc:
: Miscellaneous patches
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
arm64/ptrace: Clarify documentation of VL configuration via ptrace
acpi/arm64: remove unnecessary cast
arm64/mm: Change protval as 'pteval_t' in map_range()
arm64: uprobes: Optimize cache flushes for xol slot
acpi/arm64: Adjust error handling procedure in gtdt_parse_timer_block()
arm64: fix .data.rel.ro size assertion when CONFIG_LTO_CLANG
arm64/ptdump: Test both PTE_TABLE_BIT and PTE_VALID for block mappings
arm64/mm: Sanity check PTE address before runtime P4D/PUD folding
arm64/mm: Drop setting PTE_TYPE_PAGE in pte_mkcont()
ACPI: GTDT: Tighten the check for the array of platform timer structures
arm64/fpsimd: Fix a typo
arm64: Expose ID_AA64ISAR1_EL1.XS to sanitised feature consumers
arm64: Return early when break handler is found on linked-list
arm64/mm: Re-organize arch_make_huge_pte()
arm64/mm: Drop _PROT_SECT_DEFAULT
arm64: Add command-line override for ID_AA64MMFR0_EL1.ECV
arm64: head: Drop SWAPPER_TABLE_SHIFT
arm64: cpufeature: add POE to cpucap_is_possible()
arm64/mm: Change pgattr_change_is_safe() arguments as pteval_t
* for-next/mte:
: Various MTE improvements
selftests: arm64: add hugetlb mte tests
hugetlb: arm64: add mte support
* for-next/sysreg:
: arm64 sysreg updates
arm64/sysreg: Update ID_AA64MMFR1_EL1 to DDI0601 2024-09
* for-next/stacktrace:
: arm64 stacktrace improvements
arm64: preserve pt_regs::stackframe during exec*()
arm64: stacktrace: unwind exception boundaries
arm64: stacktrace: split unwind_consume_stack()
arm64: stacktrace: report recovered PCs
arm64: stacktrace: report source of unwind data
arm64: stacktrace: move dump_backtrace() to kunwind_stack_walk()
arm64: use a common struct frame_record
arm64: pt_regs: swap 'unused' and 'pmr' fields
arm64: pt_regs: rename "pmr_save" -> "pmr"
arm64: pt_regs: remove stale big-endian layout
arm64: pt_regs: assert pt_regs is a multiple of 16 bytes
* for-next/hwcap3:
: Add AT_HWCAP3 support for arm64 (also wire up AT_HWCAP4)
arm64: Support AT_HWCAP3
binfmt_elf: Wire up AT_HWCAP3 at AT_HWCAP4
* for-next/kselftest: (30 commits)
: arm64 kselftest fixes/cleanups
kselftest/arm64: Try harder to generate different keys during PAC tests
kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
kselftest/arm64: Add FPMR coverage to fp-ptrace
kselftest/arm64: Expand the set of ZA writes fp-ptrace does
kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
kselftest/arm64: Enable build of PAC tests with LLVM=1
kselftest/arm64: Check that SVCR is 0 in signal handlers
kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
kselftest/arm64: Fix build with stricter assemblers
kselftest/arm64: Test signal handler state modification in fp-stress
kselftest/arm64: Provide a SIGUSR1 handler in the kernel mode FP stress test
kselftest/arm64: Implement irritators for ZA and ZT
kselftest/arm64: Remove unused ADRs from irritator handlers
kselftest/arm64: Correct misleading comments on fp-stress irritators
kselftest/arm64: Poll less often while waiting for fp-stress children
kselftest/arm64: Increase frequency of signal delivery in fp-stress
kselftest/arm64: Fix encoding for SVE B16B16 test
...
* for-next/crc32:
: Optimise CRC32 using PMULL instructions
arm64/crc32: Implement 4-way interleave using PMULL
arm64/crc32: Reorganize bit/byte ordering macros
arm64/lib: Handle CRC-32 alternative in C code
* for-next/guest-cca:
: Support for running Linux as a guest in Arm CCA
arm64: Document Arm Confidential Compute
virt: arm-cca-guest: TSM_REPORT support for realms
arm64: Enable memory encrypt for Realms
arm64: mm: Avoid TLBI when marking pages as valid
arm64: Enforce bounce buffers for realm DMA
efi: arm64: Map Device with Prot Shared
arm64: rsi: Map unprotected MMIO as decrypted
arm64: rsi: Add support for checking whether an MMIO is protected
arm64: realm: Query IPA size from the RMM
arm64: Detect if in a realm and set RIPAS RAM
arm64: rsi: Add RSI definitions
* for-next/haft:
: Support for arm64 FEAT_HAFT
arm64: pgtable: Warn unexpected pmdp_test_and_clear_young()
arm64: Enable ARCH_HAS_NONLEAF_PMD_YOUNG
arm64: Add support for FEAT_HAFT
arm64: setup: name 'tcr2' register
arm64/sysreg: Update ID_AA64MMFR1_EL1 register
* for-next/scs:
: Dynamic shadow call stack fixes
arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux()
arm64/scs: Deal with 64-bit relative offsets in FDE frames
arm64/scs: Fix handling of DWARF augmentation data in CIE/FDE frames
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.13
1. Add iocsr and mmio bus simulation in kernel.
2. Add in-kernel interrupt controller emulation.
3. Add virt extension support for eiointc irqchip.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.13, part #1
- Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
- Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This call
was introduced in PSCIv1.3 as a mechanism to request hibernation,
similar to the S4 state in ACPI
- Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
- PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
- Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
- Avoid emulated MMIO completion if userspace has requested synchronous
external abort injection
- Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
|
|
If there were no anamolies noted, then we can simply remove the log file
and return, but only after the path variable has been initialized.
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20240930012757.2395-1-zhangjiao2@cmss.chinamobile.com
|
|
Add a tdc test case to exercise the just-fixed systematic leak of
IDR entries in u32 hnode disposal. Given the IDR in question is
confined to the range [1..0x7FF], it is sufficient to create/delete
the same filter 2048 times to fill it up and get a nonzero exit
status from "tc filter add".
Signed-off-by: Alexandre Ferrieux <alexandre.ferrieux@orange.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20241113100428.360460-1-alexandre.ferrieux@orange.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test to make sure the backup slaves join correct multicast group
when arp_validate enabled and ns_ip6_target is set. Here is the result:
TEST: arp_validate (active-backup ns_ip6_target arp_validate 0) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 1) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 2) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 3) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 4) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 5) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 6) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test that verifies specific behavior of arena range tree
algorithm and adjust existing big_alloc1 test due to use
of global data in arena.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20241108025616.17625-3-alexei.starovoitov@gmail.com
|
|
Cross-merge bpf fixes after downstream PR.
In particular to bring the fix in
commit aa30eb3260b2 ("bpf: Force checkpoint when jmp history is too long").
The follow up verifier work depends on it.
And the fix in
commit 6801cf7890f2 ("selftests/bpf: Use -4095 as the bad address for bits iterator").
It's fixing instability of BPF CI on s390 arch.
No conflicts.
Adjacent changes in:
Auto-merging arch/Kconfig
Auto-merging kernel/bpf/helpers.c
Auto-merging kernel/bpf/memalloc.c
Auto-merging kernel/bpf/verifier.c
Auto-merging mm/slab_common.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull bpf fixes from Daniel Borkmann:
- Fix a mismatching RCU unlock flavor in bpf_out_neigh_v6 (Jiawei Ye)
- Fix BPF sockmap with kTLS to reject vsock and unix sockets upon kTLS
context retrieval (Zijian Zhang)
- Fix BPF bits iterator selftest for s390x (Hou Tao)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix mismatched RCU unlock flavour in bpf_out_neigh_v6
bpf: Add sk_is_inet and IS_ICSK check in tls_sw_has_ctx_tx/rx
selftests/bpf: Use -4095 as the bad address for bits iterator
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"10 hotfixes, 7 of which are cc:stable. 7 are MM, 3 are not. All
singletons"
* tag 'mm-hotfixes-stable-2024-11-12-16-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: swapfile: fix cluster reclaim work crash on rotational devices
selftests: hugetlb_dio: fixup check for initial conditions to skip in the start
mm/thp: fix deferred split queue not partially_mapped: fix
mm/gup: avoid an unnecessary allocation call for FOLL_LONGTERM cases
nommu: pass NULL argument to vma_iter_prealloc()
ocfs2: fix UBSAN warning in ocfs2_verify_volume()
nilfs2: fix null-ptr-deref in block_dirty_buffer tracepoint
nilfs2: fix null-ptr-deref in block_touch_buffer tracepoint
mm: page_alloc: move mlocked flag clearance into free_pages_prepare()
mm: count zeromap read and set for swapout and swapin
|
|
- Drop obsolete references to PPC970 KVM, which was removed 10 years ago.
- Fix incorrect references to non-existing ioctls
- List registers supported by KVM_GET/SET_ONE_REG on s390
- Use rST internal links
- Reorganize the introduction to the API document
|
|
KVM x86 misc changes for 6.13
- Clean up and optimize KVM's handling of writes to MSR_IA32_APICBASE.
- Quirk KVM's misguided behavior of initialized certain feature MSRs to
their maximum supported feature set, which can result in KVM creating
invalid vCPU state. E.g. initializing PERF_CAPABILITIES to a non-zero
value results in the vCPU having invalid state if userspace hides PDCM
from the guest, which can lead to save/restore failures.
- Fix KVM's handling of non-canonical checks for vCPUs that support LA57
to better follow the "architecture", in quotes because the actual
behavior is poorly documented. E.g. most MSR writes and descriptor
table loads ignore CR4.LA57 and operate purely on whether the CPU
supports LA57.
- Bypass the register cache when querying CPL from kvm_sched_out(), as
filling the cache from IRQ context is generally unsafe, and harden the
cache accessors to try to prevent similar issues from occuring in the
future.
- Advertise AMD_IBPB_RET to userspace, and fix a related bug where KVM
over-advertises SPEC_CTRL when trying to support cross-vendor VMs.
- Minor cleanups
|
|
KVM selftests changes for 6.13
- Enable XFAM-based features by default for all selftests VMs, which will
allow removing the "no AVX" restriction.
|
|
Add three tests for struct_ops using private stack.
./test_progs -t struct_ops_private_stack
#336/1 struct_ops_private_stack/private_stack:OK
#336/2 struct_ops_private_stack/private_stack_fail:OK
#336/3 struct_ops_private_stack/private_stack_recur:OK
#336 struct_ops_private_stack:OK
The following is a snippet of a struct_ops check_member() implementation:
u32 moff = __btf_member_bit_offset(t, member) / 8;
switch (moff) {
case offsetof(struct bpf_testmod_ops3, test_1):
prog->aux->priv_stack_requested = true;
prog->aux->recursion_detected = test_1_recursion_detected;
fallthrough;
default:
break;
}
return 0;
The first test is with nested two different callback functions where the
first prog has more than 512 byte stack size (including subprogs) with
private stack enabled.
The second test is a negative test where the second prog has more than 512
byte stack size without private stack enabled.
The third test is the same callback function recursing itself. At run time,
the jit trampoline recursion check kicks in to prevent the recursion. The
recursion_detected() callback function is implemented by the bpf_testmod,
the following message in dmesg
bpf_testmod: oh no, recursing into test_1, recursion_misses 1
demonstrates the callback function is indeed triggered when recursion miss
happens.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241112163938.2225528-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Some private stack tests are added including:
- main prog only with stack size greater than BPF_PSTACK_MIN_SIZE.
- main prog only with stack size smaller than BPF_PSTACK_MIN_SIZE.
- prog with one subprog having MAX_BPF_STACK stack size and another
subprog having non-zero small stack size.
- prog with callback function.
- prog with exception in main prog or subprog.
- prog with async callback without nesting
- prog with async callback with possible nesting
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241112163927.2224750-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In performance tests, it can be counter-productive to spread torture-test
guest OSes across sockets. Plus the experimenter might have ideas about
what CPUs individual guest OSes are to run on. This commit therefore
adds a --no-affinity parameter to kvm.sh to prevent it from running
taskset on its guest OSes.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
Similar to commit [1] sample perf events less often in
test_send_signal_nmi(). This should reduce perf events throttling.
[1] 7015843afcaf ("selftests/bpf: Fix send_signal test with nested CONFIG_PARAVIRT")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241112110906.3045278-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The following invocation:
$ t1=send_signal/send_signal_perf_thread_remote \
t2=send_signal/send_signal_nmi_thread_remote \
./test_progs -t $t1,$t2
Leads to send_signal_nmi_thread_remote to be stuck
on a line 180:
/* wait for result */
err = read(pipe_c2p[0], buf, 1);
In this test case:
- perf event PERF_COUNT_HW_CPU_CYCLES is created for parent process;
- BPF program is attached to perf event, and sends a signal to child
process when event occurs;
- parent program burns some CPU in busy loop and calls read() to get
notification from child that it received a signal.
The perf event is declared with .sample_period = 1.
This forces perf to throttle events, and under some unclear conditions
the event does not always occur while parent is in busy loop.
After parent enters read() system call CPU cycles event won't be
generated for parent anymore. Thus, if perf event had not occurred
already the test is stuck.
This commit updates the parent to wait for notification with a timeout,
doing several iterations of busy loop + read_with_timeout().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241112110906.3045278-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
int read_with_timeout(int fd, char *buf, size_t count, long usec)
As a regular read(2), but allows to specify a timeout in
micro-seconds. Returns -EAGAIN on timeout.
Implemented using select().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241112110906.3045278-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This commit provides a watchdog timer that sets a limit of how long a
single sub-test could run:
- if sub-test runs for 10 seconds, the name of the test is printed
(currently the name of the test is printed only after it finishes);
- if sub-test runs for 120 seconds, the running thread is terminated
with SIGSEGV (to trigger crash_handler() and get a stack trace).
Specifically:
- the timer is armed on each call to run_one_test();
- re-armed at each call to test__start_subtest();
- is stopped when exiting run_one_test().
Default timeout could be overridden using '-w' or '--watchdog-timeout'
options. Value 0 can be used to turn the timer off.
Here is an example execution:
$ ./ssh-exec.sh ./test_progs -w 5 -t \
send_signal/send_signal_perf_thread_remote,send_signal/send_signal_nmi_thread_remote
WATCHDOG: test case send_signal/send_signal_nmi_thread_remote executes for 5 seconds, terminating with SIGSEGV
Caught signal #11!
Stack trace:
./test_progs(crash_handler+0x1f)[0x9049ef]
/lib64/libc.so.6(+0x40d00)[0x7f1f1184fd00]
/lib64/libc.so.6(read+0x4a)[0x7f1f1191cc4a]
./test_progs[0x720dd3]
./test_progs[0x71ef7a]
./test_progs(test_send_signal+0x1db)[0x71edeb]
./test_progs[0x9066c5]
./test_progs(main+0x5ed)[0x9054ad]
/lib64/libc.so.6(+0x2a088)[0x7f1f11839088]
/lib64/libc.so.6(__libc_start_main+0x8b)[0x7f1f1183914b]
./test_progs(_start+0x25)[0x527385]
#292 send_signal:FAIL
test_send_signal_common:PASS:reading pipe 0 nsec
test_send_signal_common:PASS:reading pipe error: size 0 0 nsec
test_send_signal_common:PASS:incorrect result 0 nsec
test_send_signal_common:PASS:pipe_write 0 nsec
test_send_signal_common:PASS:setpriority 0 nsec
Timer is implemented using timer_{create,start} librt API.
Internally librt uses pthreads for SIGEV_THREAD timers,
so this change adds a background timer thread to the test process.
Because of this a few checks in tests 'bpf_iter' and 'iters'
need an update to account for an extra thread.
For parallelized scenario the watchdog is also created for each worker
fork. If one of the workers gets stuck, it would be terminated by a
watchdog. In theory, this might lead to a scenario when all worker
threads are exhausted, however this should not be a problem for
server_main(), as it would exit with some of the tests not run.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241112110906.3045278-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"x86 and selftests fixes.
x86:
- When emulating a guest TLB flush for a nested guest, flush vpid01,
not vpid02, if L2 is active but VPID is disabled in vmcs12, i.e. if
L2 and L1 are sharing VPID '0' (from L1's perspective).
- Fix a bug in the SNP initialization flow where KVM would return '0'
to userspace instead of -errno on failure.
- Move the Intel PT virtualization (i.e. outputting host trace to
host buffer and guest trace to guest buffer) behind CONFIG_BROKEN.
- Fix memory leak on failure of KVM_SEV_SNP_LAUNCH_START
- Fix a bug where KVM fails to inject an interrupt from the IRR after
KVM_SET_LAPIC.
Selftests:
- Increase the timeout for the memslot performance selftest to avoid
false failures on arm64 and nested x86 platforms.
- Fix a goof in the guest_memfd selftest where a for-loop initialized
a bit mask to zero instead of BIT(0).
- Disable strict aliasing when building KVM selftests to prevent the
compiler from treating things like "u64 *" to "uint64_t *" cases as
undefined behavior, which can lead to nasty, hard to debug
failures.
- Force -march=x86-64-v2 for KVM x86 selftests if and only if the
uarch is supported by the compiler.
- Fix broken compilation of kvm selftests after a header sync in
tools/"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: Bury Intel PT virtualization (guest/host mode) behind CONFIG_BROKEN
KVM: x86: Unconditionally set irr_pending when updating APICv state
kvm: svm: Fix gctx page leak on invalid inputs
KVM: selftests: use X86_MEMTYPE_WB instead of VMX_BASIC_MEM_TYPE_WB
KVM: SVM: Propagate error from snp_guest_req_init() to userspace
KVM: nVMX: Treat vpid01 as current if L2 is active, but with VPID disabled
KVM: selftests: Don't force -march=x86-64-v2 if it's unsupported
KVM: selftests: Disable strict aliasing
KVM: selftests: fix unintentional noop test in guest_memfd_test.c
KVM: selftests: memslot_perf_test: increase guest sync timeout
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
- second part of the ucontrol selftest
- cpumodel sanity check selftest
- gen17 cpumodel changes
|
|
This test verifies that a hugepage, used as a user buffer for DIO
operations, is correctly freed upon unmapping. To test this, we read the
count of free hugepages before and after the mmap, DIO, and munmap
operations, then check if the free hugepage count is the same.
Reading free hugepages before the test was removed by commit 0268d4579901
('selftests: hugetlb_dio: check for initial conditions to skip at the
start'), causing the test to always fail.
This patch adds back reading the free hugepages before starting the test.
With this patch, the tests are now passing.
Test results without this patch:
./tools/testing/selftests/mm/hugetlb_dio
TAP version 13
1..4
# No. Free pages before allocation : 0
# No. Free pages after munmap : 100
not ok 1 : Huge pages not freed!
# No. Free pages before allocation : 0
# No. Free pages after munmap : 100
not ok 2 : Huge pages not freed!
# No. Free pages before allocation : 0
# No. Free pages after munmap : 100
not ok 3 : Huge pages not freed!
# No. Free pages before allocation : 0
# No. Free pages after munmap : 100
not ok 4 : Huge pages not freed!
# Totals: pass:0 fail:4 xfail:0 xpass:0 skip:0 error:0
Test results with this patch:
/tools/testing/selftests/mm/hugetlb_dio
TAP version 13
1..4
# No. Free pages before allocation : 100
# No. Free pages after munmap : 100
ok 1 : Huge pages freed successfully !
# No. Free pages before allocation : 100
# No. Free pages after munmap : 100
ok 2 : Huge pages freed successfully !
# No. Free pages before allocation : 100
# No. Free pages after munmap : 100
ok 3 : Huge pages freed successfully !
# No. Free pages before allocation : 100
# No. Free pages after munmap : 100
ok 4 : Huge pages freed successfully !
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://lkml.kernel.org/r/20241110064903.23626-1-donettom@linux.ibm.com
Fixes: 0268d4579901 ("selftests: hugetlb_dio: check for initial conditions to skip in the start")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Common SMMUv3 patches for the following patches adding nesting, shared
branch with the iommu tree.
* 'iommufd/arm-smmuv3-nested' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/arm-smmu-v3: Expose the arm_smmu_attach interface
iommu/arm-smmu-v3: Implement IOMMU_HWPT_ALLOC_NEST_PARENT
iommu/arm-smmu-v3: Support IOMMU_GET_HW_INFO via struct arm_smmu_hw_info
iommu/arm-smmu-v3: Report IOMMU_CAP_ENFORCE_CACHE_COHERENCY for CANWBS
ACPI/IORT: Support CANWBS memory access flag
ACPICA: IORT: Update for revision E.f
vfio: Remove VFIO_TYPE1_NESTING_IOMMU
...
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add a viommu_cache test function to cover vIOMMU invalidations using the
updated IOMMU_HWPT_INVALIDATE ioctl, which now allows passing in a vIOMMU
via its hwpt_id field.
Link: https://patch.msgid.link/r/f317f902041f3d05deaee4ca3fdd8ef4b8297361.1730836308.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Similar to IOMMU_TEST_OP_MD_CHECK_IOTLB verifying a mock_domain's iotlb,
IOMMU_TEST_OP_DEV_CHECK_CACHE will be used to verify a mock_dev's cache.
Link: https://patch.msgid.link/r/cd4082079d75427bd67ed90c3c825e15b5720a5f.1730836308.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
With a vIOMMU object, use space can flush any IOMMU related cache that can
be directed via a vIOMMU object. It is similar to the IOMMU_HWPT_INVALIDATE
uAPI, but can cover a wider range than IOTLB, e.g. device/desciprtor cache.
Allow hwpt_id of the iommu_hwpt_invalidate structure to carry a viommu_id,
and reuse the IOMMU_HWPT_INVALIDATE uAPI for vIOMMU invalidations. Drivers
can define different structures for vIOMMU invalidations v.s. HWPT ones.
Since both the HWPT-based and vIOMMU-based invalidation pathways check own
cache invalidation op, remove the WARN_ON_ONCE in the allocator.
Update the uAPI, kdoc, and selftest case accordingly.
Link: https://patch.msgid.link/r/b411e2245e303b8a964f39f49453a5dff280968f.1730836308.git.nicolinc@nvidia.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add a vdevice_alloc op to the viommu mock_viommu_ops for the coverage of
IOMMU_VIOMMU_TYPE_SELFTEST allocations. Then, add a vdevice_alloc TEST_F
to cover the IOMMU_VDEVICE_ALLOC ioctl.
Link: https://patch.msgid.link/r/4b9607e5b86726c8baa7b89bd48123fb44104a23.1730836308.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add a new iommufd_viommu FIXTURE and setup it up with a vIOMMU object.
Any new vIOMMU feature will be added as a TEST_F under that.
Link: https://patch.msgid.link/r/abe267c9d004b29cb1712ceba2f378209d4b7e01.1730836219.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
We very intermittently see failures in the single_thread_different_keys
PAC test. As noted in the comment in the test the PAC field can be quite
narrow so there is a chance of collisions even with different keys with a
chance of 5% for 7 bit keys, and the potential for narrower keys. The test
tries to avoid this by running repeatedly, but only tries 10 times which
even with a 5% chance of collisions isn't enough.
Increase the number of times we attempt to look for collisions by a factor
of 100, this also affects other tests which are following a similar pattern
with running the test repeatedly and either don't care like with
pac_instruction_not_nop or potentially have the same issue like
exec_sign_all.
The PAC tests are very fast, running in a second or two even in emulation,
so the 100x increased cost is mildly irritating but not a huge issue. The
bulk of the overhead is in the exec_sign_all test which does a fork() and
exec() per iteration.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241111-arm64-pac-test-collisions-v1-2-171875f37e44@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The PAC exec_sign_all() test spawns some child processes, creating pipes
to be stdin and stdout for the child. It cleans up most of the file
descriptors that are created as part of this but neglects to clean up the
parent end of the child stdin and stdout. Add the missing close() calls.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241111-arm64-pac-test-collisions-v1-1-171875f37e44@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When building for streaming SVE the irritator for SVE skips updates of both
P0 and FFR. While FFR is skipped since it might not be present there is no
reason to skip corrupting P0 so switch to an instruction valid in streaming
mode and move the ifdef.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-3-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This commit adds an rcutorture scenario that tests light-weight SRCU
readers. While in the area, it adjusts the size of the TREE10 scenario.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: <bpf@vger.kernel.org>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
Compiling the child_cleanup() function results in:
gcs-stress.c: In function ‘child_cleanup’:
gcs-stress.c:266:75: warning: format ‘%d’ expects a matching ‘int’ argument [-Wformat=]
266 | ksft_print_msg("%s: Exited due to signal %d\n",
| ~^
| |
| int
Add the missing child->exit_signal argument.
Fixes: 05e6cfff58c4 ("kselftest/arm64: Add a GCS stress test")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add coverage for FPMR to fp-ptrace. FPMR can be available independently of
SVE and SME, if SME is supported then FPMR is cleared by entering and
exiting streaming mode. As with other registers we generate random values
to load into the register, we restrict these to bitfields which are always
defined. We also leave bitfields where the valid values are affected by
the set of supported FP8 formats zero to reduce complexity, it is unlikely
that specific bitfields will be affected by ptrace issues.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241112-arm64-fp-ptrace-fpmr-v2-3-250b57c61254@kernel.org
[catalin.marinas@arm.com: use REG_FPMR instead of FPMR]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently our test for implementable ZA writes is written in a bit of a
convoluted fashion which excludes all changes where we clear SVCR.SM even
though we can actually support that since changing the vector length resets
SVCR. Make the logic more direct, enabling us to actually run these cases.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241112-arm64-fp-ptrace-fpmr-v2-2-250b57c61254@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The assembler portions of fp-ptrace are passed feature flags by the C code
indicating which architectural features are supported. Currently these use
an entire register for each flag which is wasteful and gets cumbersome as
new flags are added. Switch to using flag bits in a single register to make
things easier to maintain.
No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241112-arm64-fp-ptrace-fpmr-v2-1-250b57c61254@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently we don't build the PAC selftests when building with LLVM=1 since
we attempt to test for PAC support in the toolchain before we've set up the
build system to point at LLVM in lib.mk, which has to be one of the last
things in the Makefile.
Since all versions of LLVM supported for use with the kernel have PAC
support we can just sidestep the issue by just assuming PAC is there when
doing a LLVM=1 build.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241111-arm64-selftest-pac-clang-v1-1-08599ceee418@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
We don't currently validate that we exit streaming mode and clear ZA when
we enter a signal handler. Add simple checks for this in the SSVE and ZA
tests.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241106-arm64-fpmr-signal-test-v1-1-31fa34ce58fe@kernel.org
[catalin.marinas@arm.com: Use %lx in fprintf() as uint64_t seems to be unsigned long in glibc]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Check number of paths by fib_info_num_path(),
and update_or_create_fnhe() for every path.
Problem is that pmtu is cached only for the oif
that has received icmp message "need to frag",
other oifs will still try to use "default" iface mtu.
An example topology showing the problem:
| host1
+---------+
| dummy0 | 10.179.20.18/32 mtu9000
+---------+
+-----------+----------------+
+---------+ +---------+
| ens17f0 | 10.179.2.141/31 | ens17f1 | 10.179.2.13/31
+---------+ +---------+
| (all here have mtu 9000) |
+------+ +------+
| ro1 | 10.179.2.140/31 | ro2 | 10.179.2.12/31
+------+ +------+
| |
---------+------------+-------------------+------
|
+-----+
| ro3 | 10.10.10.10 mtu1500
+-----+
|
========================================
some networks
========================================
|
+-----+
| eth0| 10.10.30.30 mtu9000
+-----+
| host2
host1 have enabled multipath and
sysctl net.ipv4.fib_multipath_hash_policy = 1:
default proto static src 10.179.20.18
nexthop via 10.179.2.12 dev ens17f1 weight 1
nexthop via 10.179.2.140 dev ens17f0 weight 1
When host1 tries to do pmtud from 10.179.20.18/32 to host2,
host1 receives at ens17f1 iface an icmp packet from ro3 that ro3 mtu=1500.
And host1 caches it in nexthop exceptions cache.
Problem is that it is cached only for the iface that has received icmp,
and there is no way that ro3 will send icmp msg to host1 via another path.
Host1 now have this routes to host2:
ip r g 10.10.30.30 sport 30000 dport 443
10.10.30.30 via 10.179.2.12 dev ens17f1 src 10.179.20.18 uid 0
cache expires 521sec mtu 1500
ip r g 10.10.30.30 sport 30033 dport 443
10.10.30.30 via 10.179.2.140 dev ens17f0 src 10.179.20.18 uid 0
cache
So when host1 tries again to reach host2 with mtu>1500,
if packet flow is lucky enough to be hashed with oif=ens17f1 its ok,
if oif=ens17f0 it blackholes and still gets icmp msgs from ro3 to ens17f1,
until lucky day when ro3 will send it through another flow to ens17f0.
Signed-off-by: Vladimir Vdovin <deliran@verdict.gg>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20241108093427.317942-1-deliran@verdict.gg
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The netconsole selftest relies on the availability of the netdevsim module.
To ensure the test can run correctly, we need to check if the netdevsim
module is either loaded or built-in before proceeding.
Update the netconsole selftest to check for the existence of
the /sys/bus/netdevsim/new_device file before running the test. If the
file is not found, the test is skipped with an explanation that the
CONFIG_NETDEVSIM kernel config option may not be enabled.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241108-netcon_selftest_deps-v1-1-1789cbf3adcd@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add an epoll busy poll test using netdevsim.
This test is comprised of:
- busy_poller (via busy_poller.c)
- busy_poll_test.sh which loads netdevsim, sets up network namespaces,
and runs busy_poller to receive data and socat to send data.
The selftest tests two different scenarios:
- busy poll (the pre-existing version in the kernel)
- busy poll with suspend enabled (what this series adds)
The data transmit is a 1MiB temporary file generated from /dev/urandom
and the test is considered passing if the md5sum of the input file to
socat matches the md5sum of the output file from busy_poller.
netdevsim was chosen instead of veth due to netdevsim's support for
netdev-genl.
For now, this test uses the functionality that netdevsim provides. In the
future, perhaps netdevsim can be extended to emulate device IRQs to more
thoroughly test all pre-existing kernel options (like defer_hard_irqs)
and suspend.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Co-developed-by: Martin Karsten <mkarsten@uwaterloo.ca>
Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20241109050245.191288-6-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Only RX side for now and small message to test the setup.
In the future, we can extend it to TX side and to testing
both sides with a couple of megs of data.
make \
-C tools/testing/selftests \
TARGETS="drivers/hw/net" \
install INSTALL_PATH=~/tmp/ksft
scp ~/tmp/ksft ${HOST}:
scp ~/tmp/ksft ${PEER}:
cfg+="NETIF=${DEV}\n"
cfg+="LOCAL_V6=${HOST_IP}\n"
cfg+="REMOTE_V6=${PEER_IP}\n"
cfg+="REMOTE_TYPE=ssh\n"
cfg+="REMOTE_ARGS=root@${PEER}\n"
echo -e "$cfg" | ssh root@${HOST} "cat > ksft/drivers/net/net.config"
ssh root@${HOST} "cd ksft && ./run_kselftest.sh -t drivers/net:devmem.py"
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241107181211.3934153-13-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is where all the tests that depend on the HW functionality live in
and this is where the automated test is gonna be added in the next
patch.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241107181211.3934153-12-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
