Age | Commit message (Collapse) | Author |
|
https://bugs.linaro.org/show_bug.cgi?id=3782
Turns out arm doesn't permit mapping address 0, so try minimum virtual
address instead.
Link: http://lkml.kernel.org/r/20181113165446.GA28157@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reported-by: Rafael David Tinoco <rafael.tinoco@linaro.org>
Tested-by: Rafael David Tinoco <rafael.tinoco@linaro.org>
Acked-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Misc fixes:
- counter freezing related regression fix
- uprobes race fix
- Intel PMU unusual event combination fix
- .. and diverse tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
uprobes: Fix handle_swbp() vs. unregister() + register() race once more
perf/x86/intel: Disallow precise_ip on BTS events
perf/x86/intel: Add generic branch tracing check to intel_pmu_has_bts()
perf/x86/intel: Move branch tracing setup to the Intel-specific source file
perf/x86/intel: Fix regression by default disabling perfmon v4 interrupt handling
perf tools beauty ioctl: Support new ISO7816 commands
tools uapi asm-generic: Synchronize ioctls.h
tools arch x86: Update tools's copy of cpufeatures.h
tools headers uapi: Synchronize i915_drm.h
perf tools: Restore proper cwd on return from mnt namespace
tools build feature: Check if get_current_dir_name() is available
perf tools: Fix crash on synthesizing the unit
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"Two fixes for boundary conditions"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix segfault in .cold detection with -ffunction-sections
objtool: Fix double-free in .cold detection error path
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Disable BH while holding list spinlock in nf_conncount, from
Taehee Yoo.
2) List corruption in nf_conncount, also from Taehee.
3) Fix race that results in leaving around an empty list node in
nf_conncount, from Taehee Yoo.
4) Proper chain handling for inactive chains from the commit path,
from Florian Westphal. This includes a selftest for this.
5) Do duplicate rule handles when replacing rules, also from Florian.
6) Remove net_exit path in xt_RATEEST that results in splat, from Taehee.
7) Possible use-after-free in nft_compat when releasing extensions.
From Florian.
8) Memory leak in xt_hashlimit, from Taehee.
9) Call ip_vs_dst_notifier after ipv6_dev_notf, from Xin Long.
10) Fix cttimeout with udplite and gre, from Florian.
11) Preserve oif for IPv6 link-local generated traffic from mangle
table, from Alin Nastac.
12) Missing error handling in masquerade notifiers, from Taehee Yoo.
13) Use mutex to protect registration/unregistration of masquerade
extensions in order to prevent a race, from Taehee.
14) Incorrect condition check in tree_nodes_free(), also from Taehee.
15) Fix chain counter leak in rule replacement path, from Taehee.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2018-11-25
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix an off-by-one bug when adjusting subprog start offsets after
patching, from Edward.
2) Fix several bugs such as overflow in size allocation in queue /
stack map creation, from Alexei.
3) Fix wrong IPv6 destination port byte order in bpf_sk_lookup_udp
helper, from Andrey.
4) Fix several bugs in bpftool such as preventing an infinite loop
in get_fdinfo, error handling and man page references, from Quentin.
5) Fix a warning in bpf_trace_printk() that wasn't catching an
invalid format string, from Martynas.
6) Fix a bug in BPF cgroup local storage where non-atomic allocation
was used in atomic context, from Roman.
7) Fix a NULL pointer dereference bug in bpftool from reallocarray()
error handling, from Jakub and Wen.
8) Add a copy of pkt_cls.h and tc_bpf.h uapi headers to the tools
include infrastructure so that bpftool compiles on older RHEL7-like
user space which does not ship these headers, from Yonghong.
9) Fix BPF kselftests for user space where to get ping test working
with ping6 and ping -6, from Li.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two issues in the Operating Performance Points (OPP)
framework, one cpufreq driver issue, one problem related to the tasks
freezer and a few build-related issues in the cpupower utility.
Specifics:
- Fix tasks freezer deadlock in de_thread() that occurs if one of its
sub-threads has been frozen already (Chanho Min).
- Avoid registering a platform device by the ti-cpufreq driver on
platforms that cannot use it (Dave Gerlach).
- Fix a mistake in the ti-opp-supply operating performance points
(OPP) driver that caused an incorrect reference voltage to be used
and make it adjust the minimum voltage dynamically to avoid hangs
or crashes in some cases (Keerthy).
- Fix issues related to compiler flags in the cpupower utility and
correct a linking problem in it by renaming a file with a duplicate
name (Jiri Olsa, Konstantin Khlebnikov)"
* tag 'pm-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
exec: make de_thread() freezable
cpufreq: ti-cpufreq: Only register platform_device when supported
opp: ti-opp-supply: Correct the supply in _get_optimal_vdd_voltage call
opp: ti-opp-supply: Dynamically update u_volt_min
tools cpupower: Override CFLAGS assignments
tools cpupower debug: Allow to use outside build flags
tools/power/cpupower: fix compilation with STATIC=true
|
|
This patch fixes a possible null pointer dereference in
do_load, detected by the semantic patch deref_null.cocci,
with the following warning:
./tools/bpf/bpftool/prog.c:1021:23-25: ERROR: map_replace is NULL but dereferenced.
The following code has potential null pointer references:
881 map_replace = reallocarray(map_replace, old_map_fds + 1,
882 sizeof(*map_replace));
883 if (!map_replace) {
884 p_err("mem alloc failed");
885 goto err_free_reuse_maps;
886 }
...
1019 err_free_reuse_maps:
1020 for (i = 0; i < old_map_fds; i++)
1021 close(map_replace[i].fd);
1022 free(map_replace);
Fixes: 3ff5a4dc5d89 ("tools: bpftool: allow reuse of maps with bpftool prog load")
Co-developed-by: Wen Yang <wen.yang99@zte.com.cn>
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes:
- Update kernel ABI headers, one of them lead to a small change in
the ioctl 'cmd' beautifier in 'perf trace' to support the new ISO7816
commands. (Arnaldo Carvalho de Melo)
- Restore proper cwd on return from mnt namespace (Jiri Olsa)
- Add feature check for the get_current_dir_name() function used in the
namespace fix from Jiri, that is not available in systems such as
Alpine Linux, which uses the musl libc (Arnaldo Carvalho de Melo)
- Fix crash in 'perf record' when synthesizing the unit for events such
as 'cpu-clock' (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower utility updates for 4.20-rc4 from Shuah Khan:
"This cpupower update for Linux 4.20-rc4 consists of compile fixes to allow
use of outside build flags and override of CFLAGS from Jiri Olsa, and fix
to compilation with STATIC=true from Konstantin Khlebnikov."
* tag 'linux-cpupower-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
tools cpupower: Override CFLAGS assignments
tools cpupower debug: Allow to use outside build flags
tools/power/cpupower: fix compilation with STATIC=true
|
|
Because find_symbol_by_name() traverses the same lists as
read_symbols(), changing sym->name in place without copying it affects
the result of find_symbol_by_name(). In the case where a ".cold"
function precedes its parent in sec->symbol_list, it can result in a
function being considered a parent of itself. This leads to function
length being set to 0 and other consequent side-effects including a
segfault in add_switch_table(). The effects of this bug are only
visible when building with -ffunction-sections in KCFLAGS.
Fix by copying the search string instead of modifying it in place.
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions")
Link: http://lkml.kernel.org/r/910abd6b5a4945130fd44f787c24e07b9e07c8da.1542736240.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
If read_symbols() fails during second list traversal (the one dealing
with ".cold" subfunctions) it frees the symbol, but never deletes it
from the list/hash_table resulting in symbol being freed again in
elf_close(). Fix it by just returning an error, leaving cleanup to
elf_close().
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions")
Link: http://lkml.kernel.org/r/beac5a9b7da9e8be90223459dcbe07766ae437dd.1542736240.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Introduced in:
ad8c0eaa0a41 ("tty/serial_core: add ISO7816 infrastructure")
Now 'perf trace' will be able to pretty-print the 'cmd' ioctl arg when
used in capable systems with software emitting those commands.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-7bds48dhckfnleie08mit314@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes in:
ad8c0eaa0a41 ("tty/serial_core: add ISO7816 infrastructure")
That is a change that imply a change to be made in tools/perf/trace/beauty/ioctl.c to
make 'perf trace' ioctl syscall argument beautifier to support these new
commands: TIOCGISO7816 and TIOCSISO7816.
This is not yet done automatically by a script like is done for some
other headers, for instance:
$ tools/perf/trace/beauty/drm_ioctl.sh | head
#ifndef DRM_COMMAND_BASE
#define DRM_COMMAND_BASE 0x40
#endif
static const char *drm_ioctl_cmds[] = {
[0x00] = "VERSION",
[0x01] = "GET_UNIQUE",
[0x02] = "GET_MAGIC",
[0x03] = "IRQ_BUSID",
[0x04] = "GET_MAP",
[0x05] = "GET_CLIENT",
$
So we will need to change tools/perf/trace/beauty/ioctl.c in a follow up
patch until we switch to a generator script.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-zin76fe6iykqsilvo6u47f9o@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes in the following csets:
ace6485a0326 ("x86/cpufeatures: Enumerate MOVDIR64B instruction")
33823f4d63f7 ("x86/cpufeatures: Enumerate MOVDIRI instruction")
No tools were affected, copy it to silence this perf tool build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lkml.kernel.org/n/tip-83kcyqa1qkxkhm1s7q3hbpel@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes in:
900ccf30f9e1 ("drm/i915: Only force GGTT coherency w/a on required chipsets")
No changes are required in tools/ nor does anything gets automatically
generated to be used in the 'perf trace' syscall arg beautifiers.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-t2vor2wegv41gt5n49095kly@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When reporting on 'record' server we try to retrieve/use the mnt
namespace of the profiled tasks. We use following API with cookie to
hold the return namespace, roughly:
nsinfo__mountns_enter(struct nsinfo *nsi, struct nscookie *nc)
setns(newns, 0);
...
new ns related open..
...
nsinfo__mountns_exit(struct nscookie *nc)
setns(nc->oldns)
Once finished we setns to old namespace, which also sets the current
working directory (cwd) to "/", trashing the cwd we had.
This is mostly fine, because we use absolute paths almost everywhere,
but it screws up 'perf diff':
# perf diff
failed to open perf.data: No such file or directory (try 'perf record' first)
...
Adding the current working directory to be part of the cookie and
restoring it in the nsinfo__mountns_exit call.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 843ff37bb59e ("perf symbols: Find symbols in different mount namespace")
Link: http://lkml.kernel.org/r/20181101170001.30019-1-jolsa@kernel.org
[ No need to check for NULL args for free(), use zfree() for struct members ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
As the namespace support code will use this, which is not available in
some non _GNU_SOURCE libraries such as Android's bionic used in my
container build tests (r12b and r15c at the moment).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-x56ypm940pwclwu45d7jfj47@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pull networking fixes from David Miller:
1) Fix some potentially uninitialized variables and use-after-free in
kvaser_usb can drier, from Jimmy Assarsson.
2) Fix leaks in qed driver, from Denis Bolotin.
3) Socket leak in l2tp, from Xin Long.
4) RSS context allocation fix in bnxt_en from Michael Chan.
5) Fix cxgb4 build errors, from Ganesh Goudar.
6) Route leaks in ipv6 when removing exceptions, from Xin Long.
7) Memory leak in IDR allocation handling of act_pedit, from Davide
Caratti.
8) Use-after-free of bridge vlan stats, from Nikolay Aleksandrov.
9) When MTU is locked, do not force DF bit on ipv4 tunnels. From
Sabrina Dubroca.
10) When NAPI cached skb is reused, we must set it to the proper initial
state which includes skb->pkt_type. From Eric Dumazet.
11) Lockdep and non-linear SKB handling fix in tipc from Jon Maloy.
12) Set RX queue properly in various tuntap receive paths, from Matthew
Cover.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits)
tuntap: fix multiqueue rx
ipv6: Fix PMTU updates for UDP/raw sockets in presence of VRF
tipc: don't assume linear buffer when reading ancillary data
tipc: fix lockdep warning when reinitilaizing sockets
net-gro: reset skb->pkt_type in napi_reuse_skb()
tc-testing: tdc.py: Guard against lack of returncode in executed command
tc-testing: tdc.py: ignore errors when decoding stdout/stderr
ip_tunnel: don't force DF when MTU is locked
MAINTAINERS: Add entry for CAKE qdisc
net: bridge: fix vlan stats use-after-free on destruction
socket: do a generic_file_splice_read when proto_ops has no splice_read
net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs
Revert "net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs"
net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs
net/sched: act_pedit: fix memory leak when IDR allocation fails
net: lantiq: Fix returned value in case of error in 'xrx200_probe()'
ipv6: fix a dst leak when removing its exception
net: mvneta: Don't advertise 2.5G modes
drivers/net/ethernet/qlogic/qed/qed_rdma.h: fix typo
net/mlx4: Fix UBSAN warning of signed integer overflow
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A small batch of fixes for v4.20-rc3.
The overflow continuation fix addresses something that has been broken
for several releases. Arguably it could wait even longer, but it's a
one line fix and this finishes the last of the known address range
scrub bug reports. The revert addresses a lockdep regression. The unit
tests are not critical to fix, but no reason to hold this fix back.
Summary:
- Address Range Scrub overflow continuation handling has been broken
since it was initially merged. It was only recently that error
injection and platform-BIOS support enabled this corner case to be
exercised.
- The recent attempt to provide more isolation for the kernel Address
Range Scrub state machine from userapace initiated sessions
triggers a lockdep report. Revert and try again at the next merge
window.
- Fix a kasan reported buffer overflow in libnvdimm unit test
infrastrucutre (nfit_test)"
* tag 'libnvdimm-fixes-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
Revert "acpi, nfit: Further restrict userspace ARS start requests"
acpi, nfit: Fix ARS overflow continuation
tools/testing/nvdimm: Fix the array size for dimm devices.
|
|
Add some defensive coding in case one of the subprocesses created by tdc
returns nothing. If no object is returned from exec_cmd, then tdc will
halt with an unhandled exception.
Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Prevent exceptions from being raised while decoding output
from an executed command. There is no impact on tdc's
execution and the verify command phase would fail the pattern
match.
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When patching in a new sequence for the first insn of a subprog, the start
of that subprog does not change (it's the first insn of the sequence), so
adjust_subprog_starts should check start <= off (rather than < off).
Also added a test to test_verifier.c (it's essentially the syz reproducer).
Fixes: cc8b0b92a169 ("bpf: introduce function calls (function boundaries)")
Reported-by: syzbot+4fc427c7af994b0948be@syzkaller.appspotmail.com
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Two weeks worth of fixes since rc1.
- I broke 16-byte alignment of the stack when we moved PPR into
pt_regs. Despite being required by the ABI this broke almost
nothing, we eventually hit it in code where GCC does arithmetic on
the stack pointer assuming the bottom 4 bits are clear. Fix it by
padding the in-kernel pt_regs by 8 bytes.
- A couple of commits fixing minor bugs in the recent SLB rewrite.
- A build fix related to tracepoints in KVM in some configurations.
- Our old "IO workarounds" code written for Cell couldn't coexist in
a kernel that runs on Power9 with the Radix MMU, fix that.
- Remove the NPU DMA ops, these just printed a warning and should
never have been called.
- Suppress an overly chatty message triggered by CPU hotplug in some
configs.
- Two small selftest fixes.
Thanks to: Alistair Popple, Gustavo Romero, Nicholas Piggin, Satheesh
Rajendran, Scott Wood"
* tag 'powerpc-4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Adjust wild_bctr to build with old binutils
powerpc/64: Fix kernel stack 16-byte alignment
powerpc/numa: Suppress "VPHN is not supported" messages
selftests/powerpc: Fix wild_bctr test to work on ppc64
powerpc/io: Fix the IO workarounds code to work with Radix
powerpc/mm/64s: Fix preempt warning in slb_allocate_kernel()
KVM: PPC: Move and undef TRACE_INCLUDE_PATH/FILE
powerpc/mm/64s: Only use slbfee on CPUs that support it
powerpc/mm/64s: Use PPC_SLBFEE macro
powerpc/mm/64s: Consolidate SLB assertions
powerpc/powernv/npu: Remove NPU DMA ops
|
|
Currently the selftest wild_bctr can fail to build when an old gcc is
used, notably on gcc using a binutils version <= 2.27, because the
assembler does not support the integer suffix UL.
This patch adjusts the wild_bctr test so the REG_POISON value is still
treated as an unsigned long for the shifts on compilation but the UL
suffix is absent on the stringification, so the inline asm code
generated has no UL suffixes.
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
[mpe: Wrap long line]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Adam reported a record command crash for simple session like:
$ perf record -e cpu-clock ls
with following backtrace:
Program received signal SIGSEGV, Segmentation fault.
3543 ev = event_update_event__new(size + 1, PERF_EVENT_UPDATE__UNIT, evsel->id[0]);
(gdb) bt
#0 perf_event__synthesize_event_update_unit
#1 0x000000000051e469 in perf_event__synthesize_extra_attr
#2 0x00000000004445cb in record__synthesize
#3 0x0000000000444bc5 in __cmd_record
...
We synthesize an update event that needs to touch the evsel id array,
which is not defined at that time. Fix this by forcing the id allocation
for events with their unit defined.
Reflecting possible read_format ID bit in the attr tests.
Reported-by: Yongxin Liu <yongxin.liu@outlook.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adam Lee <leeadamrobert@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201477
Fixes: bfd8f72c2778 ("perf record: Synthesize unit/scale/... in event update")
Link: http://lkml.kernel.org/r/20181112130012.5424-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Start flood ping for each cpu while loading/flushing rulesets to make
sure we do not access already-free'd rules from nf_tables evaluation loop.
Also add this to TARGETS so 'make run_tests' in selftest dir runs it
automatically.
This would have caught the bug fixed in previous change
("netfilter: nf_tables: do not skip inactive chains during generation update")
sooner.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The selftest I recently added to test branching to an out-of-bounds
NIP doesn't work on 64-bit big endian. It does fail but not in the
right way. That is it SEGVs trying to load from the opd at BAD_NIP,
but it never gets as far as branching to BAD_NIP.
To fix it we need to create an opd which is reachable but which holds
the bad address.
Fixes: b7683fc66eba ("selftests/powerpc: Add a test of wild bctr")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
At commit deee2cae27d1 ("kselftests/bpf: use ping6 as the default ipv6 ping
binary if it exists"), it fixed similar issues for shell script, but it
missed a same issue in the C code.
Fixes: 371e4fcc9d96 ("selftests/bpf: cgroup local storage-based network counters")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
CC: Philip Li <philip.li@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Update references to other bpftool man pages at the bottom of each
manual page. Also reference the "bpf(2)" and "bpf-helpers(7)" man pages.
References are sorted by number of man section, then by
"prog-and-map-go-first", the other pages in alphabetical order.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Function open_obj_pinned() prints error messages when it fails to open a
link in the BPF virtual file system. However, in some occasions it is
not desirable to print an error, for example when we parse all links
under the bpffs root, and the error is due to some paths actually being
symbolic links.
Example output:
# ls -l /sys/fs/bpf/
lrwxrwxrwx 1 root root 0 Oct 18 19:00 ip -> /sys/fs/bpf/tc/
drwx------ 3 root root 0 Oct 18 19:00 tc
lrwxrwxrwx 1 root root 0 Oct 18 19:00 xdp -> /sys/fs/bpf/tc/
# bpftool --bpffs prog show
Error: bpf obj get (/sys/fs/bpf): Permission denied
Error: bpf obj get (/sys/fs/bpf): Permission denied
# strace -e bpf bpftool --bpffs prog show
bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/ip", bpf_fd=0}, 72) = -1 EACCES (Permission denied)
Error: bpf obj get (/sys/fs/bpf): Permission denied
bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/xdp", bpf_fd=0}, 72) = -1 EACCES (Permission denied)
Error: bpf obj get (/sys/fs/bpf): Permission denied
...
To fix it, pass a bool as a second argument to the function, and prevent
it from printing an error when the argument is set to true.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Edit the documentation of the -f|--bpffs option to make it explicit that
it dumps paths of pinned programs when bpftool is used to list the
programs only, so that users do not believe they will see the name of
the newly pinned program with "bpftool prog pin" or "bpftool prog load".
Also fix the plain output: do not add a blank line after each program
block, in order to remain consistent with what bpftool does when the
option is not passed.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Function getline() returns -1 on failure to read a line, thus creating
an infinite loop in get_fdinfo() if the key is not found. Fix it by
calling the function only as long as we get a strictly positive return
value.
Found by copying the code for a key which is not always present...
Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Commit f6f3bac08ff9 ("tools/bpf: bpftool: add net support")
added certain networking support to bpftool.
The implementation relies on a relatively recent uapi header file
linux/tc_act/tc_bpf.h on the host which contains the marco
definition of TCA_ACT_BPF_ID.
Unfortunately, this is not the case for all distributions.
See the email message below where rhel-7.2 does not have
an up-to-date linux/tc_act/tc_bpf.h.
https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1799211.html
Further investigation found that linux/pkt_cls.h is also needed for macro
TCA_BPF_TAG.
This patch fixed the issue by copying linux/tc_act/tc_bpf.h
and linux/pkt_cls.h from kernel include/uapi directory to
tools/include/uapi directory so building the bpftool does not depend
on host system for these files.
Fixes: f6f3bac08ff9 ("tools/bpf: bpftool: add net support")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Cc: Li Zhijian <zhijianx.li@intel.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent improvements and fixes from Arnaldo Carvalho de Melo:
Intel PT SQL viewer: (Adrian Hunter)
- Fall back to /usr/local/lib/libxed.so
- Add Selected branches report
- Add help window
- Fix table find when table re-ordered
Intel PT debug log (Adrian Hunter)
- Add more event information
- Add MTC and CYC timestamps
perf record: (Andi Kleen)
- Support weak groups, just like with 'perf stat'
perf trace: (Arnaldo Carvalho de Melo)
- Start augmenting raw_syscalls:{sys_enter,sys_exit}: goal is to have a
generic, arch independent eBPF kernel component that is programmed with
syscall table details, what to copy, how many bytes, pid, arg filters from the
userspace via eBPF maps by the 'perf trace' tool that continues to use all its
argument beautifiers, just taking advantage of the extra pointer contents.
JVMTI: (Gustavo Romero)
- Fix undefined symbol scnprintf in libperf-jvmti.so
perf top: (Jin Yao)
- Display the LBR stats in callchain entries
perf stat: (Thomas Richter)
- Handle different PMU names with common prefix
arm64: Will (Deacon)
- Fix arm64 tools build failure wrt smp_load_{acquire,release}.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
So user could specify outside CFLAGS values.
Cc: Thomas Renninger <trenn@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Adding CFLAGS and LDFLAGS to be used during the build.
Cc: Thomas Renninger <trenn@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Rename duplicate sysfs_read_file into cpupower_read_sysfs and fix linking.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Thomas Renninger <trenn@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Andi reported following malfunction:
# perf record -e '{ref-cycles,cycles}:S' -a sleep 1
# perf script
non matching sample_id_all
That's because we disable sample_id_all bit for non-sampling group
members. We can't do that, because it needs to be the same over the
whole event list. This patch keeps it untouched again.
Reported-by: Andi Kleen <andi@firstfloor.org>
Tested-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180923150420.27327-1-jolsa@kernel.org
Fixes: e9add8bac6c6 ("perf evsel: Disable write_backward for leader sampling group events")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
KASAN reports following global out of bounds access while
nfit_test is being loaded. The out of bound access happens
the following reference to dimm_fail_cmd_flags[dimm]. 'dimm' is
over than the index value, NUM_DCR (==5).
static int override_return_code(int dimm, unsigned int func, int rc)
{
if ((1 << func) & dimm_fail_cmd_flags[dimm]) {
dimm_fail_cmd_flags[] definition:
static unsigned long dimm_fail_cmd_flags[NUM_DCR];
'dimm' is the return value of get_dimm(), and get_dimm() returns
the index of handle[] array. The handle[] has 7 index. Let's use
ARRAY_SIZE(handle) as the array size.
KASAN report:
==================================================================
BUG: KASAN: global-out-of-bounds in nfit_test_ctl+0x47bb/0x55b0 [nfit_test]
Read of size 8 at addr ffffffffc10cbbe8 by task kworker/u41:0/8
...
Call Trace:
dump_stack+0xea/0x1b0
? dump_stack_print_info.cold.0+0x1b/0x1b
? kmsg_dump_rewind_nolock+0xd9/0xd9
print_address_description+0x65/0x22e
? nfit_test_ctl+0x47bb/0x55b0 [nfit_test]
kasan_report.cold.6+0x92/0x1a6
nfit_test_ctl+0x47bb/0x55b0 [nfit_test]
...
The buggy address belongs to the variable:
dimm_fail_cmd_flags+0x28/0xffffffffffffa440 [nfit_test]
==================================================================
Fixes: 39611e83a28c ("tools/testing/nvdimm: Make DSM failure code injection...")
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Currently jvmti agent can not be used because function scnprintf is not
present in the agent libperf-jvmti.so. As a result the JVM when using
such agent to record JITed code profiling information will fail on
looking up scnprintf:
java: symbol lookup error: lib/libperf-jvmti.so: undefined symbol: scnprintf
This commit fixes that by reverting to the use of snprintf, that can be
looked up, instead of scnprintf, adding a proper check for the returned
value in order to print a better error message when the jitdump file
pathname is too long. Checking the returned value also helps to comply
with some recent gcc versions, like gcc8, which will fail due to
truncated writing checks related to the -Werror=format-truncation= flag.
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
LPU-Reference: 1541117601-18937-2-git-send-email-gromero@linux.vnet.ibm.com
Link: https://lkml.kernel.org/n/tip-mvpxxxy7wnzaj74cq75muw3f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Guenter reported that using ARCH=x86_64 to build perf has regressed:
$ make -C tools/perf O=/tmp/build/perf ARCH=x86_64
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j4' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ on ]
<SNIP>
... bpf: [ on ]
GEN /tmp/build/perf/common-cmds.h
make[2]: *** No rule to make target '/home/acme/git/perf/tools/arch/x86_64/include/uapi/asm//mman.h', needed by '/tmp/build/perf/trace/beauty/generated/mmap_flags_array.c'. Stop.
make[2]: *** Waiting for unfinished jobs....
PERF_VERSION = 4.19.gf6c23e3
make[1]: *** [Makefile.perf:207: sub-make] Error 2
make: *** [Makefile:70: all] Error 2
make: Leaving directory '/home/acme/git/perf/tools/perf'
$
This is because we must use $(SRCARCH) where we were using $(ARCH), so
that, just like the top level Makefile, we get this done:
# Additional ARCH settings for x86
ifeq ($(ARCH),i386)
SRCARCH := x86
endif
ifeq ($(ARCH),x86_64)
SRCARCH := x86
endif
Which is done in tools/scripts/Makefile.arch, so switch to use
$(SRCARCH).
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: fbd7458db757 ("perf beauty: Wire up the mmap flags table generator to the Makefile")
Link: https://lkml.kernel.org/r/20181105184612.GD7077@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
One cause of decoding errors is un-synchronized side-band data.
Timestamps are needed to debug such cases. TSC packet timestamps are
logged. Log also MTC and CYC timestamps.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/20181105073505.8129-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
More event information is useful for debugging, especially MMAP events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/20181105073505.8129-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
re-ordered
Table rows can be re-ordered by selecting a column to sort by. After
re-ordering, the "find" operation was highlighting the wrong row, fix
it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181104151238.15947-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a window to display help. It is also possible to display the help
only, by using the option "--help-only" instead of a database name.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181104151238.15947-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fetching data from the database can be slow. Add a report that provides
the ability to select a subset of branches.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181104151238.15947-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
/usr/local/lib/libxed.so
Fall back to /usr/local/lib/libxed.so to cater for distributions that do
not have /usr/local/lib in the library path by default.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181104151238.15947-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
'perf report' has supported the displaying of LBR stats (such as cycles,
predicted%) in callchain entry.
For example:
$ perf report --branch-history --stdio
--1.01%--intel_idle mwait.h:29
intel_idle cpufeature.h:164 (cycles:5)
intel_idle cpufeature.h:164 (predicted:76.4%)
intel_idle mwait.h:102 (cycles:41)
intel_idle current.h:15
While 'perf top' doesn't support that.
For example:
$ perf top -a -b --call-graph branch
- 13.86% 0.23% [kernel] [k] __x86_indirect_thunk_rax
- 13.65% __x86_indirect_thunk_rax
+ 1.69% do_syscall_64
+ 1.68% do_select
+ 1.41% ktime_get
+ 0.70% __schedule
+ 0.62% do_sys_poll
0.58% __x86_indirect_thunk_rax
Actually it's very easy to enable this feature in 'perf top'.
With this patch, the result is:
$ perf top -a -b --call-graph branch
$ - 13.58% 0.00% [kernel] [k] __x86_indirect_thunk_rax
$ - 13.57% __x86_indirect_thunk_rax (predicted:93.9%)
$ + 1.78% do_select (cycles:2)
$ + 1.68% perf_pmu_disable.part.99 (cycles:1)
$ + 1.45% ___sys_recvmsg (cycles:25)
$ + 0.81% unix_stream_sendmsg (cycles:18)
$ + 0.80% ktime_get (cycles:400)
$ 0.58% pick_next_task_fair (cycles:47)
$ + 0.56% i915_request_retire (cycles:2)
$ + 0.52% do_sys_poll (cycles:4)
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1540983995-20462-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
On s390 the CPU Measurement Facility for counters now supports
2 PMUs named cpum_cf (CPU Measurement Facility for counters) and
cpum_cf_diag (CPU Measurement Facility for diagnostic counters)
for one and the same CPU.
Running command
[root@s35lp76 perf]# ./perf stat -e tx_c_tend \
-- ~/mytests/cf-tx-events 1
Measuring transactions
TX_C_TABORT_NO_SPECIAL: 0 expected:0
TX_C_TABORT_SPECIAL: 0 expected:0
TX_C_TEND: 1 expected:1
TX_NC_TABORT: 11 expected:11
TX_NC_TEND: 1 expected:1
Performance counter stats for '/root/mytests/cf-tx-events 1':
2 tx_c_tend
0.002120091 seconds time elapsed
0.000121000 seconds user
0.002127000 seconds sys
[root@s35lp76 perf]#
displays output which is unexpected (and wrong):
2 tx_c_tend
The test program definitely triggers only one transaction, as shown
in line 'TX_C_TEND: 1 expected:1'.
This is caused by the following call sequence:
pmu_lookup() scans and installs a PMU.
+--> pmu_aliases() parses all aliases in directory
.../<pmu-name>/events/* which are file names.
+--> pmu_aliases_parse() Read each file in directory and create
an new alias entry. This is done with
+--> perf_pmu__new_alias() and
+--> __perf_pmu__new_alias() which also check for
identical alias names.
After pmu_aliases() returns, a complete list of event names
for this pmu has been created. Now function
pmu_add_cpu_aliases() is called to add the events listed in the json
| files to the alias list of the cpu.
+--> perf_pmu__find_map() Returns a pointer to the json events.
Now function pmu_add_cpu_aliases() scans through all events listed
in the JSON files for this CPU.
Each json event pmu name is compared with the current PMU being
built up and if they mismatch, the json event is added to the
current PMUs alias list.
To avoid duplicate entries the following comparison is done:
if (!is_arm_pmu_core(name)) {
pname = pe->pmu ? pe->pmu : "cpu";
if (strncmp(pname, name, strlen(pname)))
continue;
}
The culprit is the strncmp() function.
Using current s390 PMU naming, the first PMU is 'cpum_cf'
and a long list of events is added, among them 'tx_c_tend'
When the second PMU named 'cpum_cf_diag' is added, only one event
named 'CF_DIAG' is added by the pmu_aliases() function.
Now function pmu_add_cpu_aliases() is invoked for PMU 'cpum_cf_diag'.
Since the CPUID string is the same for both PMUs, json file events
for PMU named 'cpum_cf' are added to the PMU 'cpm_cf_diag'
This happens because the strncmp() actually compares:
strncmp("cpum_cf", "cpum_cf_diag", 6);
The first parameter is the pmu name taken from the event in
the json file. The second parameter is the pmu name of the PMU
currently being built.
They are different, but the length of the compare only tests the
common prefix and this returns 0(true) when it should return false.
Now all events for PMU cpum_cf are added to the alias list for pmu
cpum_cf_diag.
Later on in function parse_events_add_pmu() the event 'tx_c_end' is
searched in all available PMUs and found twice, adding it two
times to the evsel_list global variable which is the root
of all events. This results in a counter value of 2 instead
of 1.
Output with this patch:
[root@s35lp76 perf]# ./perf stat -e tx_c_tend \
-- ~/mytests/cf-tx-events 1
Measuring transactions
TX_C_TABORT_NO_SPECIAL: 0 expected:0
TX_C_TABORT_SPECIAL: 0 expected:0
TX_C_TEND: 1 expected:1
TX_NC_TABORT: 11 expected:11
TX_NC_TEND: 1 expected:1
Performance counter stats for '/root/mytests/cf-tx-events 1':
1 tx_c_tend
0.001815365 seconds time elapsed
0.000123000 seconds user
0.001756000 seconds sys
[root@s35lp76 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Sebastien Boisvert <sboisvert@gydle.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: stable@vger.kernel.org
Fixes: 292c34c10249 ("perf pmu: Fix core PMU alias list for X86 platform")
Link: http://lkml.kernel.org/r/20181023151616.78193-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Implement a weak group fallback for 'perf record', similar to the
existing 'perf stat' support. This allows to use groups that might be
longer than the available counters without failing.
Before:
$ perf record -e '{cycles,cache-misses,cache-references,cpu_clk_unhalted.thread,cycles,cycles,cycles}' -a sleep 1
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (cycles).
/bin/dmesg | grep -i perf may provide additional information.
After:
$ ./perf record -e '{cycles,cache-misses,cache-references,cpu_clk_unhalted.thread,cycles,cycles,cycles}:W' -a sleep 1
WARNING: No sample_id_all support, falling back to unordered processing
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 8.136 MB perf.data (134069 samples) ]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181001195927.14211-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|