| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A pile of fixes that have been gathered since the previous pull. Most
of changes are device-specific, and nothing looks too scary.
- A memory leak fix in ALSA sequencer code in 6.5-rc
- Many fixes for ASoC Qualcomm CODEC drivers, covering SoundWire
probe problems
- A series of ASoC AMD fixes
- A few fixes and cleanups of selftest stuff
- HD-audio codec fixes and quirks for Clevo, HP, Lenovo, Dell"
* tag 'sound-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (52 commits)
ALSA: hda/realtek: Add support for DELL Oasis 13/14/16 laptops
ALSA: hda/realtek: Fix generic fixup definition for cs35l41 amp
ALSA: hda/realtek: Enable Mute LED on HP Laptop 15s-eq2xxx
selftests: ALSA: Add test-pcmtest-driver to .gitignore
ALSA: hda/realtek: Add quirk for Clevo NS70AU
ASoC: fsl_sai: Disable bit clock with transmitter
ALSA: seq: Fix memory leak at error path in snd_seq_create_port()
ASoC: SOF: ipc3-dtrace: uninitialized data in dfsentry_trace_filter_write()
ASoC: cs42l51: fix driver to properly autoload with automatic module loading
MAINTAINERS: Redo addition of ssm3515 to APPLE SOUND
ASoC: rt5640: Fix the issue of speaker noise
ALSA: hda/realtek - remove 3k pull low procedure
selftests: ALSA: Fix fclose on an already fclosed file pointer
ALSA: pcmtest: Don't use static storage to track per device data
ALSA: pcmtest: Convert to platform remove callback returning void
ASoC: dt-bindings: audio-graph-card2: Drop incomplete example
ASoC: dt-bindings: Update maintainer email id
ASoC: amd: ps: Fix extraneous error messages
ASoC: fsl_sai: Revert "ASoC: fsl_sai: Enable MCTL_MCLK_EN bit for master mode"
ASoC: codecs: SND_SOC_WCD934X should select REGMAP_IRQ
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from BPF, netfilter, bluetooth and CAN.
Current release - regressions:
- eth: r8169: multiple fixes for PCIe ASPM-related problems
- vrf: fix RCU lockdep splat in output path
Previous releases - regressions:
- gso: fall back to SW segmenting with GSO_UDP_L4 dodgy bit set
- dsa: mv88e6xxx: do a final check before timing out when polling
- nf_tables: fix sleep in atomic in nft_chain_validate
Previous releases - always broken:
- sched: fix undoing tcf_bind_filter() in multiple classifiers
- bpf, arm64: fix BTI type used for freplace attached functions
- can: gs_usb: fix time stamp counter initialization
- nft_set_pipapo: fix improper element removal (leading to UAF)
Misc:
- net: support STP on bridge in non-root netns, STP prevents packet
loops so not supporting it results in freezing systems of
unsuspecting users, and in turn very upset noises being made
- fix kdoc warnings
- annotate various bits of TCP state to prevent data races"
* tag 'net-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: phy: prevent stale pointer dereference in phy_init()
tcp: annotate data-races around fastopenq.max_qlen
tcp: annotate data-races around icsk->icsk_user_timeout
tcp: annotate data-races around tp->notsent_lowat
tcp: annotate data-races around rskq_defer_accept
tcp: annotate data-races around tp->linger2
tcp: annotate data-races around icsk->icsk_syn_retries
tcp: annotate data-races around tp->keepalive_probes
tcp: annotate data-races around tp->keepalive_intvl
tcp: annotate data-races around tp->keepalive_time
tcp: annotate data-races around tp->tsoffset
tcp: annotate data-races around tp->tcp_tx_delay
Bluetooth: MGMT: Use correct address for memcpy()
Bluetooth: btusb: Fix bluetooth on Intel Macbook 2014
Bluetooth: SCO: fix sco_conn related locking and validity issues
Bluetooth: hci_conn: return ERR_PTR instead of NULL when there is no link
Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor()
Bluetooth: coredump: fix building with coredump disabled
Bluetooth: ISO: fix iso_conn related locking and validity issues
Bluetooth: hci_event: call disconnect callback before deleting conn
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.5
A few more fixes for v6.5, just small driver specific ones.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says:
====================
pull-request: bpf 2023-07-19
We've added 4 non-merge commits during the last 1 day(s) which contain
a total of 3 files changed, 55 insertions(+), 10 deletions(-).
The main changes are:
1) Fix stack depth check in presence of async callbacks,
from Kumar Kartikeya Dwivedi.
2) Fix BTI type used for freplace attached functions,
from Alexander Duyck.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, arm64: Fix BTI type used for freplace attached functions
selftests/bpf: Add more tests for check_max_stack_depth bug
bpf: Repeat check_max_stack_depth for async callbacks
bpf: Fix subprog idx logic in check_max_stack_depth
====================
Link: https://lore.kernel.org/r/20230719174502.74023-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It was forgotten to add the new binary to .gitignore. Let's fix it.
Fixes: 10b98a4db11a ("selftests: ALSA: Add test for the 'pcmtest' driver")
Link: https://lore.kernel.org/r/20230719114336.18409-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When looking at the TC selftest reports, I noticed one test was failing
because /proc/net/nf_conntrack was not available.
not ok 373 3992 - Add ct action triggering DNAT tuple conflict
Could not match regex pattern. Verify command output:
cat: /proc/net/nf_conntrack: No such file or directory
It is only available if NF_CONNTRACK_PROCFS kconfig is set. So the issue
can be fixed simply by adding it to the list of required kconfig.
Fixes: e46905641316 ("tc-testing: add test for ct DNAT tuple collision")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/netdev/0e061d4a-9a23-9f58-3b35-d8919de332d7@tessares.net/T/ [1]
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Tested-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20230713-tc-selftests-lkft-v1-3-1eb4fd3a96e7@tessares.net
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When looking for something else in LKFT reports [1], I noticed most of
the tests were skipped because the "teardown stage" did not complete
successfully.
Pedro found out this is due to the fact CONFIG_NF_FLOW_TABLE is required
but not listed in the 'config' file. Adding it to the list fixes the
issues on LKFT side. CONFIG_NET_ACT_CT is now set to 'm' in the final
kconfig.
Fixes: c34b961a2492 ("net/sched: act_ct: Create nf flow table per zone")
Cc: stable@vger.kernel.org
Link: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230711/testrun/18267241/suite/kselftest-tc-testing/test/tc-testing_tdc_sh/log [1]
Link: https://lore.kernel.org/netdev/0e061d4a-9a23-9f58-3b35-d8919de332d7@tessares.net/T/ [2]
Suggested-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Tested-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20230713-tc-selftests-lkft-v1-2-1eb4fd3a96e7@tessares.net
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When looking for something else in LKFT reports [1], I noticed that the
TC selftest ended with a timeout error:
not ok 1 selftests: tc-testing: tdc.sh # TIMEOUT 45 seconds
The timeout had been introduced 3 years ago, see the Fixes commit below.
This timeout is only in place when executing the selftests via the
kselftests runner scripts. I guess this is not what most TC devs are
using and nobody noticed the issue before.
The new timeout is set to 15 minutes as suggested by Pedro [2]. It looks
like it is plenty more time than what it takes in "normal" conditions.
Fixes: 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Cc: stable@vger.kernel.org
Link: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230711/testrun/18267241/suite/kselftest-tc-testing/test/tc-testing_tdc_sh/log [1]
Link: https://lore.kernel.org/netdev/0e061d4a-9a23-9f58-3b35-d8919de332d7@tessares.net/T/ [2]
Suggested-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20230713-tc-selftests-lkft-v1-1-1eb4fd3a96e7@tessares.net
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Another test which now exercies the path of the verifier where it will
explore call chains rooted at the async callback. Without the prior
fixes, this program loads successfully, which is incorrect.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230717161530.1238-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Don't group events when computing metrics that require more than the
maximum number of simultaneously enabled events on AMD systems.
- Fix multi CU handling in 'perf probe', add a 'perf test' entry to
regress test it.
- Make the 'perf test task_exit' stop generating samples by using the
'dummy' event, all it is testing is if a PERF_RECORD_EXIT is
generated at the end of a perf session. This makes this perf test to
stop sometimes failing on some systems due to a full ring buffer.
- Avoid SEGV if PMU lookup fails for legacy cache terms.
- Fix libsubcmd SEGV/use-after-free when commands aren't excluded.
- Fix OpenCSD (ARM64's CoreSight hardware tracing) library path
resolution when specifying CSLIBS= in the make command line.
- Fix broken feature check for libtracefs due to external lib changes,
use the provided pkgconfig file instead future proof it.
- Sync drm, fcntl, kvm, mount, prctl, socket, vhost, asound, arm64's
cputype headers with the kernel sources, in some cases this made the
tools become aware of new kernel APIs such as ioctls and the
cachestat sysctl.
* tag 'perf-tools-fixes-for-v6.5-1-2023-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf test task_exit: No need for a cycles event to check if we get an PERF_RECORD_EXIT
tools headers arm64: Sync arm64's cputype.h with the kernel sources
tools include UAPI: Sync the sound/asound.h copy with the kernel sources
tools include UAPI: Sync linux/vhost.h with the kernel sources
perf beauty: Update copy of linux/socket.h with the kernel sources
perf parse-events: Avoid SEGV if PMU lookup fails for legacy cache terms
libsubcmd: Avoid SEGV/use-after-free when commands aren't excluded
tools headers UAPI: Sync linux/prctl.h with the kernel sources
perf build: Fix broken feature check for libtracefs due to external lib changes
tools include UAPI: Sync linux/mount.h copy with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers uapi: Sync linux/fcntl.h with the kernel sources
perf vendor events amd: Fix large metrics
perf build: Fix library not found error when using CSLIBS
tools headers UAPI: Sync files changed by new cachestat syscall with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
perf probe: Read DWARF files from the correct CU
perf probe: Add test for regression introduced by switch to die_get_decl_file()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Seven hotfixes, six of which are cc:stable and one of which addresses
a post-6.5 issue"
* tag 'mm-hotfixes-stable-2023-07-18-12-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
maple_tree: fix node allocation testing on 32 bit
maple_tree: fix 32 bit mas_next testing
selftests/mm: mkdirty: fix incorrect position of #endif
maple_tree: set the node limit when creating a new root node
mm/mlock: fix vma iterator conversion of apply_vma_lock_flags()
prctl: move PR_GET_AUXV out of PR_MCE_KILL
selftests/mm: give scripts execute permission
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Fixes to bugs that are interfering with arm64 and risc workflows. Also
two fixes to timer and mincore tests that are causing test failures"
* tag 'linux-kselftest-fixes-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/arm64: fix build failure during the "emit_tests" step
selftests/riscv: fix potential build failure during the "emit_tests" step
tools: timers: fix freq average calculation
selftests/mincore: fix skip condition for check_huge_pages test
|
|
Internal node counting was altered and the 64 bit test was updated,
however the 32bit test was missed.
Restore the 32bit test to a functional state.
Link: https://lore.kernel.org/linux-mm/CAMuHMdV4T53fOw7VPoBgPR7fP6RYqf=CBhD_y_vOg53zZX_DnA@mail.gmail.com/
Link: https://lkml.kernel.org/r/20230712173916.168805-2-Liam.Howlett@oracle.com
Fixes: 541e06b772c1 ("maple_tree: remove GFP_ZERO from kmem_cache_alloc() and kmem_cache_alloc_bulk()")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The #endif is the wrong side of a } causing a build failure when
__NR_userfaultfd is not defined. Fix this by moving the #end to enclose
the }
Link: https://lkml.kernel.org/r/20230712134648.456349-1-colin.i.king@gmail.com
Fixes: 9eac40fc0cc7 ("selftests/mm: mkdirty: test behavior of (pte|pmd)_mkdirty on VMAs without write permissions")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
PERF_RECORD_EXIT
The intent of this test is to check we get a PERF_RECORD_EXIT as asked
for by setting perf_event_attr.task=1.
When the test was written we didn't had the "dummy" event so we went
with the default event, "cycles".
There were reports of this test failing sometimes, one of these reports
was with a PREEMPT_RT_FULL, but I noticed it failing sometimes with an
aarch64 Firefly board.
In the kernel the call to perf_event_task_output(), that generates the
PERF_RECORD_EXIT may fail when there is not enough memory in the ring
buffer, if the ring buffer is paused, etc.
So switch to using the "dummy" event to use the ring buffer just for
what the test was designed for, avoiding uneeded PERF_RECORD_SAMPLEs.
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZLGXmMuNRpx1ubFm@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Mark copy_iovec_from_user() __noclone in order to prevent gcc from
doing an inter-procedural optimization and confuse objtool
- Initialize struct elf fully to avoid build failures
* tag 'objtool_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
iov_iter: Mark copy_iovec_from_user() noclone
objtool: initialize all of struct elf
|
|
The build failure reported in [1] occurred because commit <9fc96c7c19df>
("selftests: error out if kernel header files are not yet built") added
a new "kernel_header_files" dependency to "all", and that triggered
another, pre-existing problem. Specifically, the arm64 selftests
override the emit_tests target, and that override improperly declares
itself to depend upon the "all" target.
This is a problem because the "emit_tests" target in lib.mk was not
intended to be overridden. emit_tests is a very simple, sequential build
target that was originally invoked from the "install" target, which in
turn, depends upon "all".
That approach worked for years. But with 9fc96c7c19df in place,
emit_tests failed, because it does not set up all of the elaborate
things that "install" does. And that caused the new
"kernel_header_files" target (which depends upon $(KBUILD_OUTPUT) being
correct) to fail.
Some detail: The "all" target is .PHONY. Therefore, each target that
depends on "all" will cause it to be invoked again, and because
dependencies are managed quite loosely in the selftests Makefiles, many
things will run, even "all" is invoked several times in immediate
succession. So this is not a "real" failure, as far as build steps go:
everything gets built, but "all" reports a problem when invoked a second
time from a bad environment.
To fix this, simply remove the unnecessary "all" dependency from the
overridden emit_tests target. The dependency is still effectively
honored, because again, invocation is via "install", which also depends
upon "all".
An alternative approach would be to harden the emit_tests target so that
it can depend upon "all", but that's a lot more complicated and hard to
get right, and doesn't seem worth it, especially given that emit_tests
should probably not be overridden at all.
[1] https://lore.kernel.org/20230710-kselftest-fix-arm64-v1-1-48e872844f25@kernel.org
Fixes: 9fc96c7c19df ("selftests: error out if kernel header files are not yet built")
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The riscv selftests (which were modeled after the arm64 selftests) are
improperly declaring the "emit_tests" target to depend upon the "all"
target. This approach, when combined with commit 9fc96c7c19df
("selftests: error out if kernel header files are not yet built"), has
caused build failures [1] on arm64, and is likely to cause similar
failures for riscv.
To fix this, simply remove the unnecessary "all" dependency from the
emit_tests target. The dependency is still effectively honored, because
again, invocation is via "install", which also depends upon "all".
An alternative approach would be to harden the emit_tests target so that
it can depend upon "all", but that's a lot more complicated and hard to
get right, and doesn't seem worth it, especially given that emit_tests
should probably not be overridden at all.
[1] https://lore.kernel.org/20230710-kselftest-fix-arm64-v1-1-48e872844f25@kernel.org
Fixes: 9fc96c7c19df ("selftests: error out if kernel header files are not yet built")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When run under run_vmtests.sh, test scripts were failing to run with
"permission denied" due to the scripts not being executable.
It is also annoying not to be able to directly invoke run_vmtests.sh,
which is solved by giving also it the execute permission.
Link: https://lkml.kernel.org/r/20230713135440.3651409-3-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
To get the changes in:
e910baa9c1efdf76 ("KVM: arm64: vgic: Add Apple M2 PRO/MAX cpus to the list of broken SEIS implementations")
That makes this perf source code to be rebuilt:
CC /tmp/build/perf-tools/util/arm-spe.o
The changes in the above patch don't affect things that are used in
arm-spe.c (things like MIDR_NEOVERSE_N1, etc). Unsure if Apple M2 has
SPE (Statistical Profiling Extension) :-)
That addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Picking the changes from:
01dfa8e969dbbc72 ("ALSA: ump: Add info flag bit for static blocks")
e375b8a045873cf5 ("ALSA: ump: Add more attributes to UMP EP and FB info")
30fc139260d46e9b ("ALSA: ump: Add ioctls to inquiry UMP EP and Block info via control API")
127ae6f6dad2edb2 ("ALSA: rawmidi: Skip UMP devices at SNDRV_CTL_IOCTL_RAWMIDI_NEXT_DEVICE")
e3a8a5b726bdd903 ("ALSA: rawmidi: UMP support")
a4bb75c4f19db711 ("ALSA: uapi: pcm: control the filling of the silence samples for drain")
That harvests some new ioctls:
$ tools/perf/trace/beauty/sndrv_ctl_ioctl.sh > before.ctl
$ tools/perf/trace/beauty/sndrv_pcm_ioctl.sh > before.pcm
$ cp include/uapi/sound/asound.h tools/include/uapi/sound/asound.h
$ tools/perf/trace/beauty/sndrv_ctl_ioctl.sh > after.ctl
$ tools/perf/trace/beauty/sndrv_pcm_ioctl.sh > after.pcm
$ diff -u before.ctl after.ctl
--- before.ctl 2023-07-14 10:17:00.319591889 -0300
+++ after.ctl 2023-07-14 10:17:24.668248373 -0300
@@ -22,6 +22,9 @@
[0x40] = "RAWMIDI_NEXT_DEVICE",
[0x41] = "RAWMIDI_INFO",
[0x42] = "RAWMIDI_PREFER_SUBDEVICE",
+ [0x43] = "UMP_NEXT_DEVICE",
+ [0x44] = "UMP_ENDPOINT_INFO",
+ [0x45] = "UMP_BLOCK_INFO",
[0xd0] = "POWER",
[0xd1] = "POWER_STATE",
};
$ diff -u before.pcm after.pcm
$
Now those will be decoded when they appear, see a system wide 'perf
trace' session example here:
# perf trace -e ioctl --max-events=10
0.000 ( 0.010 ms): gnome-shell/2240 ioctl(fd: 9, cmd: DRM_MODE_RMFB, arg: 0x7ffc0041d54c) = 0
2.444 ( 0.005 ms): wireplumber/2304 ioctl(fd: 47, cmd: TIOCOUTQ, arg: 0x7f16e9afea24) = 0
2.452 ( 0.002 ms): wireplumber/2304 ioctl(fd: 47, cmd: TIOCOUTQ, arg: 0x7f16e9afea24) = 0
11.348 ( 0.010 ms): gnome-shell/2240 ioctl(fd: 14, cmd: DRM_I915_IRQ_WAIT, arg: 0x7ffc0041ccf0) = 0
11.406 ( 0.037 ms): gnome-shel:cs0/2259 ioctl(fd: 14, cmd: DRM_I915_IRQ_EMIT, arg: 0x7f3cf69fdc60) = 0
11.476 ( 0.009 ms): gnome-shell/2240 ioctl(fd: 9, cmd: DRM_MODE_ADDFB2, arg: 0x7ffc0041ce50) = 0
11.497 ( 0.019 ms): gnome-shell/2240 ioctl(fd: 9, cmd: DRM_MODE_ATOMIC, arg: 0x7ffc0041cdf0) = 0
12.481 ( 0.020 ms): firefox:cs0/3651 ioctl(fd: 40, cmd: DRM_I915_IRQ_EMIT, arg: 0x7f1c365fea60) = 0
12.529 ( 0.009 ms): firefox:cs0/3651 ioctl(fd: 40, cmd: DRM_I915_IRQ_EMIT, arg: 0x7f1c365feab0) = 0
12.624 ( 0.018 ms): firefox:cs0/3651 ioctl(fd: 40, cmd: DRM_I915_IRQ_EMIT, arg: 0x7f1c365fea30) = 0
#
Silencing these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/lkml/ZLFOrTE2+xZBgHGe@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes in:
228a27cf78afc63a ("vhost: Allow worker switching while work is queueing")
c1ecd8e950079774 ("vhost: allow userspace to create workers")
To pick up these changes and support them:
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before
$ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after
$ diff -u before after
--- before 2023-07-14 09:58:14.268249807 -0300
+++ after 2023-07-14 09:58:23.041493892 -0300
@@ -10,6 +10,7 @@
[0x12] = "SET_VRING_BASE",
[0x13] = "SET_VRING_ENDIAN",
[0x14] = "GET_VRING_ENDIAN",
+ [0x15] = "ATTACH_VRING_WORKER",
[0x20] = "SET_VRING_KICK",
[0x21] = "SET_VRING_CALL",
[0x22] = "SET_VRING_ERR",
@@ -31,10 +32,12 @@
[0x7C] = "VDPA_SET_GROUP_ASID",
[0x7D] = "VDPA_SUSPEND",
[0x7E] = "VDPA_RESUME",
+ [0x9] = "FREE_WORKER",
};
static const char *vhost_virtio_ioctl_read_cmds[] = {
[0x00] = "GET_FEATURES",
[0x12] = "GET_VRING_BASE",
+ [0x16] = "GET_VRING_WORKER",
[0x26] = "GET_BACKEND_FEATURES",
[0x70] = "VDPA_GET_DEVICE_ID",
[0x71] = "VDPA_GET_STATUS",
@@ -44,6 +47,7 @@
[0x79] = "VDPA_GET_CONFIG_SIZE",
[0x7A] = "VDPA_GET_AS_NUM",
[0x7B] = "VDPA_GET_VRING_GROUP",
+ [0x8] = "NEW_WORKER",
[0x80] = "VDPA_GET_VQS_COUNT",
[0x81] = "VDPA_GET_GROUP_NUM",
};
$
For instance, see how those 'cmd' ioctl arguments get translated, now
ATTACH_VRING_WORKER, GET_VRING_WORKER and NEW_WORKER, will be as well:
# perf trace -a -e ioctl --max-events=10
0.000 ( 0.011 ms): pipewire/2261 ioctl(fd: 60, cmd: SNDRV_PCM_HWSYNC, arg: 0x1) = 0
21.353 ( 0.014 ms): pipewire/2261 ioctl(fd: 60, cmd: SNDRV_PCM_HWSYNC, arg: 0x1) = 0
25.766 ( 0.014 ms): gnome-shell/2196 ioctl(fd: 14, cmd: DRM_I915_IRQ_WAIT, arg: 0x7ffe4a22c740) = 0
25.845 ( 0.034 ms): gnome-shel:cs0/2212 ioctl(fd: 14, cmd: DRM_I915_IRQ_EMIT, arg: 0x7fd43915dc70) = 0
25.916 ( 0.011 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_ADDFB2, arg: 0x7ffe4a22c8a0) = 0
25.941 ( 0.025 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_ATOMIC, arg: 0x7ffe4a22c840) = 0
32.915 ( 0.009 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_RMFB, arg: 0x7ffe4a22cf9c) = 0
42.522 ( 0.013 ms): gnome-shell/2196 ioctl(fd: 14, cmd: DRM_I915_IRQ_WAIT, arg: 0x7ffe4a22c740) = 0
42.579 ( 0.031 ms): gnome-shel:cs0/2212 ioctl(fd: 14, cmd: DRM_I915_IRQ_EMIT, arg: 0x7fd43915dc70) = 0
42.644 ( 0.010 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_ADDFB2, arg: 0x7ffe4a22c8a0) = 0
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZLFJ%2FRsDGYiaH5nj@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
b848b26c6672c9b9 ("net: Kill MSG_SENDPAGE_NOTLAST")
5e2ff6704a275be0 ("scm: add SO_PASSPIDFD and SCM_PIDFD")
4fe38acdac8a71f7 ("net: Block MSG_SENDPAGE_* from being passed to sendmsg() by userspace")
b841b901c452d926 ("net: Declare MSG_SPLICE_PAGES internal sendmsg() flag")
That don't result in any changes in the tables generated from that
header.
But while updating I noticed we were not handling MSG_BATCH and MSG_ZEROCOPY in the
hard coded table for the msg flags table, add them.
This silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Mikhalitsyn <alexander@mihalicyn.com>
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZLFGuHDwUGDGXdoR@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter, wireless and ebpf.
Current release - regressions:
- netfilter: conntrack: gre: don't set assured flag for clash entries
- wifi: iwlwifi: remove 'use_tfh' config to fix crash
Previous releases - regressions:
- ipv6: fix a potential refcount underflow for idev
- icmp6: ifix null-ptr-deref of ip6_null_entry->rt6i_idev in
icmp6_dev()
- bpf: fix max stack depth check for async callbacks
- eth: mlx5e:
- check for NOT_READY flag state after locking
- fix page_pool page fragment tracking for XDP
- eth: igc:
- fix tx hang issue when QBV gate is closed
- fix corner cases for TSN offload
- eth: octeontx2-af: Move validation of ptp pointer before its usage
- eth: ena: fix shift-out-of-bounds in exponential backoff
Previous releases - always broken:
- core: prevent skb corruption on frag list segmentation
- sched:
- cls_fw: fix improper refcount update leads to use-after-free
- sch_qfq: account for stab overhead in qfq_enqueue
- netfilter:
- report use refcount overflow
- prevent OOB access in nft_byteorder_eval
- wifi: mt7921e: fix init command fail with enabled device
- eth: ocelot: fix oversize frame dropping for preemptible TCs
- eth: fec: recycle pages for transmitted XDP frames"
* tag 'net-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
selftests: tc-testing: add test for qfq with stab overhead
net/sched: sch_qfq: account for stab overhead in qfq_enqueue
selftests: tc-testing: add tests for qfq mtu sanity check
net/sched: sch_qfq: reintroduce lmax bound check for MTU
wifi: cfg80211: fix receiving mesh packets without RFC1042 header
wifi: rtw89: debug: fix error code in rtw89_debug_priv_send_h2c_set()
net: txgbe: fix eeprom calculation error
net/sched: make psched_mtu() RTNL-less safe
net: ena: fix shift-out-of-bounds in exponential backoff
netdevsim: fix uninitialized data in nsim_dev_trap_fa_cookie_write()
net/sched: flower: Ensure both minimum and maximum ports are specified
MAINTAINERS: Add another mailing list for QUALCOMM ETHQOS ETHERNET DRIVER
docs: netdev: update the URL of the status page
wifi: iwlwifi: remove 'use_tfh' config to fix crash
xdp: use trusted arguments in XDP hints kfuncs
bpf: cpumap: Fix memory leak in cpu_map_update_elem
wifi: airo: avoid uninitialized warning in airo_get_rate()
octeontx2-pf: Add additional check for MCAM rules
net: dsa: Removed unneeded of_node_put in felix_parse_ports_node
net: fec: use netdev_err_once() instead of netdev_err()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix some missing-prototype warnings
- Fix user events struct args (did not include size of struct)
When creating a user event, the "struct" keyword is to denote that
the size of the field will be passed in. But the parsing failed to
handle this case.
- Add selftest to struct sizes for user events
- Fix sample code for direct trampolines.
The sample code for direct trampolines attached to handle_mm_fault().
But the prototype changed and the direct trampoline sample code was
not updated. Direct trampolines needs to have the arguments correct
otherwise it can fail or crash the system.
- Remove unused ftrace_regs_caller_ret() prototype.
- Quiet false positive of FORTIFY_SOURCE
Due to backward compatibility, the structure used to save stack
traces in the kernel had a fixed size of 8. This structure is
exported to user space via the tracing format file. A change was made
to allow more than 8 functions to be recorded, and user space now
uses the size field to know how many functions are actually in the
stack.
But the structure still has size of 8 (even though it points into the
ring buffer that has the required amount allocated to hold a full
stack.
This was fine until the fortifier noticed that the
memcpy(&entry->caller, stack, size) was greater than the 8 functions
and would complain at runtime about it.
Hide this by using a pointer to the stack location on the ring buffer
instead of using the address of the entry structure caller field.
- Fix a deadloop in reading trace_pipe that was caused by a mismatch
between ring_buffer_empty() returning false which then asked to read
the data, but the read code uses rb_num_of_entries() that returned
zero, and causing a infinite "retry".
- Fix a warning caused by not using all pages allocated to store ftrace
functions, where this can happen if the linker inserts a bunch of
"NULL" entries, causing the accounting of how many pages needed to be
off.
- Fix histogram synthetic event crashing when the start event is
removed and the end event is still using a variable from it
- Fix memory leak in freeing iter->temp in tracing_release_pipe()
* tag 'trace-v6.5-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix memory leak of iter->temp when reading trace_pipe
tracing/histograms: Add histograms to hist_vars if they have referenced variables
tracing: Stop FORTIFY_SOURCE complaining about stack trace caller
ftrace: Fix possible warning on checking all pages used in ftrace_process_locs()
ring-buffer: Fix deadloop issue on reading trace_pipe
tracing: arm64: Avoid missing-prototype warnings
selftests/user_events: Test struct size match cases
tracing/user_events: Fix struct arg size match check
x86/ftrace: Remove unsued extern declaration ftrace_regs_caller_ret()
arm64: ftrace: Add direct call trampoline samples support
samples: ftrace: Save required argument registers in sample trampolines
|
|
Delete a duplicate assignment from this function implementation.
The note means ppm is average of the two actual freq samples.
But ppm have a duplicate assignment.
Signed-off-by: Minjie Du <duminjie@vivo.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The check_huge_pages test was failing instead of skipping on qemu-armv7
because the skip condition wasn't handled properly. Add an additional
check to fix it.
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYuoB8Ug8PcTU-YGmemL7_eeEksXFihvxWF6OikD7sK7pA@mail.gmail.com
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
A packet with stab overhead greater than QFQ_MAX_LMAX should be dropped
by the QFQ qdisc as it can't handle such lengths.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
QFQ only supports a certain bound of MTU size so make sure
we check for this requirement in the tests.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In the case where a sysfs file cannot be opened the error return path
fcloses file pointer fpl, however, fpl has already been closed in the
previous stanza. Fix the double fclose by removing it.
Fixes: 10b98a4db11a ("selftests: ALSA: Add test for the 'pcmtest' driver")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230712140122.457206-1-colin.i.king@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
libfuzzer found the following command could SEGV:
$ perf stat -e cpu/L2,L2/ true
This is because the L2 term rewrites the perf_event_attr type to
PERF_TYPE_HW_CACHE which then fails the PMU lookup for the second
legacy cache term.
The new failure is consistent with repeated hardware terms:
$ perf stat -e cpu/L2,L2/ true
event syntax error: 'cpu/L2,L2/'
\___ Failed to find PMU for type 3
Initial error:
event syntax error: 'cpu/L2,L2/'
\___ Failed to find PMU for type 3
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
$ perf stat -e cpu/cycles,cycles/ true
event syntax error: 'cpu/cycles,cycles/'
\___ Failed to find PMU for type 0
Initial error:
event syntax error: 'cpu/cycles,cycles/'
\___ Failed to find PMU for type 0
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Committer testing:
Before:
$ perf stat -e cpu/L2,L2/ true
Segmentation fault (core dumped)
$
After:
$ perf stat -e cpu/L2,L2/ true
event syntax error: 'cpu/L2,L2/'
\___ Failed to find PMU for type 3
Initial error:
event syntax error: 'cpu/L2,L2/'
\___ Failed to find PMU for type 3
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
$
Fixes: 6fd1e5191591f9d5 ("perf parse-events: Support PMUs for legacy cache events")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230712065250.1450306-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- AMD SFH shift-out-of-bounds fix (Basavaraj Natikar)
- avoid struct memcpy overrun warning in the hid-hyperv module (Arnd
Bergmann)
- a quick HID kselftests script fix for our CI to be happy (Benjamin
Tissoires)
- various fixes and additions of device IDs
* tag 'for-linus-2023071101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: amd_sfh: Fix for shift-out-of-bounds
HID: amd_sfh: Rename the float32 variable
HID: input: fix mapping for camera access keys
HID: logitech-hidpp: Add wired USB id for Logitech G502 Lightspeed
HID: nvidia-shield: Pack inner/related declarations in HOSTCMD reports
HID: hyperv: avoid struct memcpy overrun warning
selftests: hid: fix vmtests.sh not running make headers
|
|
The self tests for user_events currently does not ensure that the edge
case for struct types work properly with size differences.
Add cases for mis-matching struct names and sizes to ensure they work
properly.
Link: https://lkml.kernel.org/r/20230629235049.581-3-beaub@linux.microsoft.com
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The array shortening may perform unnecessary array copies.
Before commit 657a3efee43a ("lib subcmd: Avoid memory leak in
exclude_cmds") this was benign, but afterwards this could lead to a
SEGV.
Fixes: 657a3efee43a29d1 ("lib subcmd: Avoid memory leak in exclude_cmds")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Chenyuan Mi <cymi20@fudan.edu.cn>
Cc: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20230707230926.841086-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
1fd96a3e9d5d4feb ("riscv: Add prctl controls for userspace vector management")
That adds some RISC-V specific prctl options:
$ tools/perf/trace/beauty/prctl_option.sh > before
$ cp include/uapi/linux/prctl.h tools/include/uapi/linux/prctl.h
$ tools/perf/trace/beauty/prctl_option.sh > after
$ diff -u before after
--- before 2023-07-11 13:22:01.928705942 -0300
+++ after 2023-07-11 13:22:36.342645970 -0300
@@ -63,6 +63,8 @@
[66] = "GET_MDWE",
[67] = "SET_MEMORY_MERGE",
[68] = "GET_MEMORY_MERGE",
+ [69] = "RISCV_V_SET_CONTROL",
+ [70] = "RISCV_V_GET_CONTROL",
};
static const char *prctl_set_mm_options[] = {
[1] = "START_CODE",
$
That now will be used to decode the syscall option and also to compose
filters, for instance:
[root@five ~]# perf trace -e syscalls:sys_enter_prctl --filter option==SET_NAME
0.000 Isolated Servi/3474327 syscalls:sys_enter_prctl(option: SET_NAME, arg2: 0x7f23f13b7aee)
0.032 DOM Worker/3474327 syscalls:sys_enter_prctl(option: SET_NAME, arg2: 0x7f23deb25670)
7.920 :3474328/3474328 syscalls:sys_enter_prctl(option: SET_NAME, arg2: 0x7f23e24fbb10)
7.935 StreamT~s #374/3474328 syscalls:sys_enter_prctl(option: SET_NAME, arg2: 0x7f23e24fb970)
8.400 Isolated Servi/3474329 syscalls:sys_enter_prctl(option: SET_NAME, arg2: 0x7f23e24bab10)
8.418 StreamT~s #374/3474329 syscalls:sys_enter_prctl(option: SET_NAME, arg2: 0x7f23e24ba970)
^C[root@five ~]#
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/prctl.h include/uapi/linux/prctl.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andy Chiu <andy.chiu@sifive.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/lkml/ZK2DhOB6JJKu2A7M@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The perf build process auto-detects features and packages already
installed for its build. This is done in directory tools/build/feature.
This directory contains small sample programs. When they successfully
compile the necessary prereqs in form of libraries and header files are
present.
Such a check is also done for libtracefs. And this check fails:
Output before:
# rm -f test-libtracefs.bin; make test-libtracefs.bin
gcc -MD -Wall -Werror -o test-libtracefs.bin test-libtracefs.c \
> test-libtracefs.make.output 2>&1 -ltracefs
make: *** [Makefile:211: test-libtracefs.bin] Error 1
# cat test-libtracefs.make.output
In file included from test-libtracefs.c:2:
/usr/include/tracefs/tracefs.h:11:10: fatal error: \
event-parse.h: No such file or directory
11 | #include <event-parse.h>
| ^~~~~~~~~~~~~~~
compilation terminated.
#
The root cause of this compile error is commit 880885d9c22e
("libtracefs: Remove "traceevent/" from referencing libtraceevent
headers") in the libtracefs project hosted here:
https://git.kernel.org/pub/scm/libs/libtrace/libtracefs.git/
That mentioned patch removes the traceevent/ directory name from
the include statement, causing the file not to be included even
when the libtraceevent-devel package is installed. This package contains
the file referred to in tracefs/tracefs.h:
# rpm -ql libtraceevent-devel
/usr/include/traceevent
/usr/include/traceevent/event-parse.h <----- here
/usr/include/traceevent/event-utils.h
/usr/include/traceevent/kbuffer.h
/usr/include/traceevent/trace-seq.h
/usr/lib64/libtraceevent.so
/usr/lib64/pkgconfig/libtraceevent.pc
#
With this patch the compile succeeds.
Output after:
# rm -f test-libtracefs.bin; make test-libtracefs.bin
gcc -MD -Wall -Werror -o test-libtracefs.bin test-libtracefs.c \
> test-libtracefs.make.output 2>&1 -I/usr/include/traceevent -ltracefs
#
Committer testing:
$ make -k BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools -C tools/perf install-bin
Before:
$ cat /tmp/build/perf-tools/feature/test-libtracefs.make.output
In file included from test-libtracefs.c:2:
/usr/include/tracefs/tracefs.h:11:10: fatal error: event-parse.h: No such file or directory
11 | #include <event-parse.h>
| ^~~~~~~~~~~~~~~
compilation terminated.
$
$ grep -i tracefs /tmp/build/perf-tools/FEATURE-DUMP
feature-libtracefs=0
$
After:
$ cat /tmp/build/perf-tools/feature/test-libtracefs.make.output
$
$ grep -i tracefs /tmp/build/perf-tools/FEATURE-DUMP
feature-libtracefs=1
$
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20230711135338.397473-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
6ac392815628f317 ("fs: allow to mount beneath top mount")
That, after a fix to the move_mount_flags.sh script, harvests the new
MOVE_MOUNT_BENEATH move_mount flag:
$ tools/perf/trace/beauty/move_mount_flags.sh > before
$ cp include/uapi/linux/mount.h tools/include/uapi/linux/mount.h
$ tools/perf/trace/beauty/move_mount_flags.sh > after
$
$ diff -u before after
--- before 2023-07-11 12:38:49.244886707 -0300
+++ after 2023-07-11 12:51:15.125255940 -0300
@@ -6,4 +6,5 @@
[ilog2(0x00000020) + 1] = "T_AUTOMOUNTS",
[ilog2(0x00000040) + 1] = "T_EMPTY_PATH",
[ilog2(0x00000100) + 1] = "SET_GROUP",
+ [ilog2(0x00000200) + 1] = "BENEATH",
};
$
That will then be properly decoded when used in tools like:
# perf trace -e move_mount
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/mount.h include/uapi/linux/mount.h
Cc: Christian Brauner <brauner@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZK17kifP%2FiYl+Hcc@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
89d01306e34d6ace ("RISC-V: KVM: Implement device interface for AIA irqchip")
22725266bdf95bdd ("KVM: Fix comment for KVM_ENABLE_CAP")
2f440b72e852be42 ("KVM: arm64: Add KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the the 'perf trace' ioctl syscall argument
beautifiers.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Anup Patel <apatel@ventanamicro.com>
Cc: Binbin Wu <binbin.wu@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Ricardo Koller <ricarkol@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/lkml/ZK12+virXMIXMysy@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes in:
96b2b072ee62be8a ("exportfs: allow exporting non-decodeable file handles to userspace")
That don't add anything that is handled by existing hard coded tables or
table generation scripts.
This silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/fcntl.h include/uapi/linux/fcntl.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZK11P5AwRBUxxutI@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There are cases where a metric requires more events than the number of
available counters. E.g. AMD Zen, Zen 2 and Zen 3 processors have four
data fabric counters but the "nps1_die_to_dram" metric has eight events.
By default, the constituent events are placed in a group and since the
events cannot be scheduled at the same time, the metric is not computed.
The "all metrics" test also fails because of this.
Use the NO_GROUP_EVENTS constraint for such metrics which anyway expect
the user to run perf with "--metric-no-group".
E.g.
$ sudo perf test -v 101
Before:
101: perf all metrics test :
--- start ---
test child forked, pid 37131
Testing branch_misprediction_ratio
Testing all_remote_links_outbound
Testing nps1_die_to_dram
Metric 'nps1_die_to_dram' not printed in:
Error:
Invalid event (dram_channel_data_controller_4) in per-thread mode, enable system wide with '-a'.
Testing macro_ops_dispatched
Testing all_l2_cache_accesses
Testing all_l2_cache_hits
Testing all_l2_cache_misses
Testing ic_fetch_miss_ratio
Testing l2_cache_accesses_from_l2_hwpf
Testing l2_cache_misses_from_l2_hwpf
Testing op_cache_fetch_miss_ratio
Testing l3_read_miss_latency
Testing l1_itlb_misses
test child finished with -1
---- end ----
perf all metrics test: FAILED!
After:
101: perf all metrics test :
--- start ---
test child forked, pid 43766
Testing branch_misprediction_ratio
Testing all_remote_links_outbound
Testing nps1_die_to_dram
Testing macro_ops_dispatched
Testing all_l2_cache_accesses
Testing all_l2_cache_hits
Testing all_l2_cache_misses
Testing ic_fetch_miss_ratio
Testing l2_cache_accesses_from_l2_hwpf
Testing l2_cache_misses_from_l2_hwpf
Testing op_cache_fetch_miss_ratio
Testing l3_read_miss_latency
Testing l1_itlb_misses
test child finished with 0
---- end ----
perf all metrics test: Ok
Reported-by: Ayush Jain <ayush.jain3@amd.com>
Suggested-by: Ian Rogers <irogers@google.com>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Link: https://lore.kernel.org/r/20230706063440.54189-1-sandipan.das@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
-L only specifies the search path for libraries directly provided in the
link line with -l. Because -lopencsd isn't specified, it's only linked
because it's a dependency of -lopencsd_c_api. Dependencies like this are
resolved using the default system search paths or -rpath-link=... rather
than -L. This means that compilation only works if OpenCSD is installed
to the system rather than provided with the CSLIBS (-L) option.
This could be fixed by adding -Wl,-rpath-link=$(CSLIBS) but that is less
conventional than just adding -lopencsd to the link line so that it uses
-L. -lopencsd seems to have been removed in commit ed17b1914978eddb
("perf tools: Drop requirement for libstdc++.so for libopencsd check")
because it was thought that there was a chance compilation would work
even if it didn't exist, but I think that only applies to libstdc++ so
there is no harm to add it back. libopencsd.so and libopencsd_c_api.so
would always exist together.
Testing
=======
The following scenarios now all work:
* Cross build with OpenCSD installed
* Cross build using CSLIBS=...
* Native build with OpenCSD installed
* Native build using CSLIBS=...
* Static cross build with OpenCSD installed
* Static cross build with CSLIBS=...
Committer testing:
⬢[acme@toolbox perf-tools]$ alias m
alias m='make -k BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools -C tools/perf install-bin && git status && perf test python ; perf record -o /dev/null sleep 0.01 ; perf stat --null sleep 0.01'
⬢[acme@toolbox perf-tools]$ ldd ~/bin/perf | grep csd
libopencsd_c_api.so.1 => /lib64/libopencsd_c_api.so.1 (0x00007fd49c44e000)
libopencsd.so.1 => /lib64/libopencsd.so.1 (0x00007fd49bd56000)
⬢[acme@toolbox perf-tools]$ cat /etc/redhat-release
Fedora release 36 (Thirty Six)
⬢[acme@toolbox perf-tools]$
Fixes: ed17b1914978eddb ("perf tools: Drop requirement for libstdc++.so for libopencsd check")
Reported-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: coresight@lists.linaro.org
Closes: https://lore.kernel.org/linux-arm-kernel/56905d7a-a91e-883a-b707-9d5f686ba5f1@arm.com/
Link: https://lore.kernel.org/all/36cc4dc6-bf4b-1093-1c0a-876e368af183@kleine-koenig.org/
Link: https://lore.kernel.org/r/20230707154546.456720-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
kernel sources
To pick the changes in these csets:
cf264e1329fb0307 ("cachestat: implement cachestat syscall")
That add support for this new syscall in tools such as 'perf trace'.
For instance, this is now possible:
# perf trace -e cachestat
^C[root@five ~]#
# perf trace -v -e cachestat
Using CPUID AuthenticAMD-25-21-0
event qualifier tracepoint filter: (common_pid != 3163687 && common_pid != 3147) && (id == 451)
mmap size 528384B
^C[root@five ~]
# perf trace -v -e *stat* --max-events=10
Using CPUID AuthenticAMD-25-21-0
event qualifier tracepoint filter: (common_pid != 3163713 && common_pid != 3147) && (id == 4 || id == 5 || id == 6 || id == 136 || id == 137 || id == 138 || id == 262 || id == 332 || id == 451)
mmap size 528384B
0.000 ( 0.009 ms): Cache2 I/O/4544 statfs(pathname: 0x45635288, buf: 0x7f8745725b60) = 0
0.012 ( 0.003 ms): Cache2 I/O/4544 newfstatat(dfd: CWD, filename: 0x45635288, statbuf: 0x7f874569d250) = 0
0.036 ( 0.002 ms): Cache2 I/O/4544 newfstatat(dfd: 138, filename: 0x541b7093, statbuf: 0x7f87457256f0, flag: 4096) = 0
0.372 ( 0.006 ms): Cache2 I/O/4544 statfs(pathname: 0x45635288, buf: 0x7f8745725b10) = 0
0.379 ( 0.003 ms): Cache2 I/O/4544 newfstatat(dfd: CWD, filename: 0x45635288, statbuf: 0x7f874569d250) = 0
0.390 ( 0.002 ms): Cache2 I/O/4544 newfstatat(dfd: 138, filename: 0x541b7093, statbuf: 0x7f87457256a0, flag: 4096) = 0
0.609 ( 0.005 ms): Cache2 I/O/4544 statfs(pathname: 0x45635288, buf: 0x7f8745725b60) = 0
0.615 ( 0.003 ms): Cache2 I/O/4544 newfstatat(dfd: CWD, filename: 0x45635288, statbuf: 0x7f874569d250) = 0
0.625 ( 0.002 ms): Cache2 I/O/4544 newfstatat(dfd: 138, filename: 0x541b7093, statbuf: 0x7f87457256f0, flag: 4096) = 0
0.826 ( 0.005 ms): Cache2 I/O/4544 statfs(pathname: 0x45635288, buf: 0x7f8745725b10) = 0
#
That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.
$ find tools/perf/arch/ -name "syscall*tbl" | xargs grep -w sys_cachestat
tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl:451 n64 cachestat sys_cachestat
tools/perf/arch/powerpc/entry/syscalls/syscall.tbl:451 common cachestat sys_cachestat
tools/perf/arch/s390/entry/syscalls/syscall.tbl:451 common cachestat sys_cachestat sys_cachestat
tools/perf/arch/x86/entry/syscalls/syscall_64.tbl:451 common cachestat sys_cachestat
$
$ grep -w cachestat /tmp/build/perf-tools/arch/x86/include/generated/asm/syscalls_64.c
[451] = "cachestat",
$
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
diff -u tools/include/uapi/linux/mman.h include/uapi/linux/mman.h
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Link: https://lore.kernel.org/lkml/ZK1pVBJpbjujJNJW@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
81b1b599dfd71c95 ("drm/i915: Allow user to set cache at BO creation")
98d2722a85c4ad5f ("drm/i915/huc: differentiate the 2 steps of the MTL HuC auth flow")
bc4be0a38b63b6d4 ("drm/i915/pmu: Prepare for multi-tile non-engine counters")
d1da138f245d4fb4 ("drm/i915/uapi/pxp: Add a GET_PARAM for PXP")
That adds some ioctls but use the __I915_PMU_OTHER() macro, not
supported yet in the tools/perf/trace/beauty/drm_ioctl.sh conversion
script.
This silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Fei Yang <fei.yang@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://lore.kernel.org/lkml/ZK1R%2FIyWcUKYQbQV@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
After switching from dwarf_decl_file() to die_get_decl_file(), it is not
possible to add probes for certain functions:
$ perf probe -x /usr/lib/systemd/systemd-logind match_unit_removed
A function DIE doesn't have decl_line. Maybe broken DWARF?
A function DIE doesn't have decl_line. Maybe broken DWARF?
Probe point 'match_unit_removed' not found.
Error: Failed to add events.
The problem is that die_get_decl_file() uses the wrong CU to search for
the file. elfutils commit e1db5cdc9f has some good explanation for this:
dwarf_decl_file uses dwarf_attr_integrate to get the DW_AT_decl_file
attribute. This means the attribute might come from a different DIE
in a different CU. If so, we need to use the CU associated with the
attribute, not the original DIE, to resolve the file name.
This patch uses the same source of information as elfutils: use attribute
DW_AT_decl_file and use this CU to search for the file.
Fixes: dc9a5d2ccd5c823c ("perf probe: Fix to get declared file name from clang DWARF5")
Signed-off-by: Georg Müller <georgmueller@gmx.net>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: regressions@lists.linux.dev
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230628084551.1860532-6-georgmueller@gmx.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch adds a test to validate that 'perf probe' works for binaries
where DWARF info is split into multiple CUs
Signed-off-by: Georg Müller <georgmueller@gmx.net>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: regressions@lists.linux.dev
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230628084551.1860532-5-georgmueller@gmx.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Function elf_open_read() only zero initializes the initial part of
allocated struct elf; num_relocs member was recently added outside the
zeroed part so that it was left uninitialized, resulting in build failures
on some systems.
The partial initialization is a relic of times when struct elf had large
hash tables embedded. This is no longer the case so remove the trap and
initialize the whole structure instead.
Fixes: eb0481bbc4ce ("objtool: Fix reloc_hash size")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20230629102051.42E8360467@lion.mk-sys.cz
|
|
According to commit 01d6c48a828b ("Documentation: kselftest:
"make headers" is a prerequisite"), running the kselftests requires
to run "make headers" first.
Do that in "vmtest.sh" as well to fix the HID CI.
Link: https://lore.kernel.org/r/20230709-fix-selftests-v1-1-57d0878114cc@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next
Pull more perf tools updates from Namhyung Kim:
"These are remaining changes and fixes for this cycle.
Build:
- Allow generating vmlinux.h from BTF using `make GEN_VMLINUX_H=1`
and skip if the vmlinux has no BTF.
- Replace deprecated clang -target xxx option by --target=xxx.
perf record:
- Print event attributes with well known type and config symbols in
the debug output like below:
# perf record -e cycles,cpu-clock -C0 -vv true
<SNIP>
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
config 0 (PERF_COUNT_HW_CPU_CYCLES)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 5
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0 (PERF_COUNT_SW_CPU_CLOCK)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
- Update AMD IBS event error message since it now support per-process
profiling but no priviledge filters.
$ sudo perf record -e ibs_op//k -C 0
Error:
AMD IBS doesn't support privilege filtering. Try again without
the privilege modifiers (like 'k') at the end.
perf lock contention:
- Support CSV style output using -x option
$ sudo perf lock con -ab -x, sleep 1
# output: contended, total wait, max wait, avg wait, type, caller
19, 194232, 21415, 10222, spinlock, process_one_work+0x1f0
15, 162748, 23843, 10849, rwsem:R, do_user_addr_fault+0x40e
4, 86740, 23415, 21685, rwlock:R, ep_poll_callback+0x2d
1, 84281, 84281, 84281, mutex, iwl_mvm_async_handlers_wk+0x135
8, 67608, 27404, 8451, spinlock, __queue_work+0x174
3, 58616, 31125, 19538, rwsem:W, do_mprotect_pkey+0xff
3, 52953, 21172, 17651, rwlock:W, do_epoll_wait+0x248
2, 30324, 19704, 15162, rwsem:R, do_madvise+0x3ad
1, 24619, 24619, 24619, spinlock, rcu_core+0xd4
- Add --output option to save the data to a file not to be interfered
by other debug messages.
Test:
- Fix event parsing test on ARM where there's no raw PMU nor supports
PERF_PMU_CAP_EXTENDED_HW_TYPE.
- Update the lock contention test case for CSV output.
- Fix a segfault in the daemon command test.
Vendor events (JSON):
- Add has_event() to check if the given event is available on system
at runtime. On Intel machines, some transaction events may not be
present when TSC extensions are disabled.
- Update Intel event metrics.
Misc:
- Sort symbols by name using an external array of pointers instead of
a rbtree node in the symbol. This will save 16-bytes or 24-bytes
per symbol whether the sorting is actually requested or not.
- Fix unwinding DWARF callstacks using libdw when --symfs option is
used"
* tag 'perf-tools-for-v6.5-2-2023-07-06' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next: (38 commits)
perf test: Fix event parsing test when PERF_PMU_CAP_EXTENDED_HW_TYPE isn't supported.
perf test: Fix event parsing test on Arm
perf evsel amd: Fix IBS error message
perf: unwind: Fix symfs with libdw
perf symbol: Fix uninitialized return value in symbols__find_by_name()
perf test: Test perf lock contention CSV output
perf lock contention: Add --output option
perf lock contention: Add -x option for CSV style output
perf lock: Remove stale comments
perf vendor events intel: Update tigerlake to 1.13
perf vendor events intel: Update skylakex to 1.31
perf vendor events intel: Update skylake to 57
perf vendor events intel: Update sapphirerapids to 1.14
perf vendor events intel: Update icelakex to 1.21
perf vendor events intel: Update icelake to 1.19
perf vendor events intel: Update cascadelakex to 1.19
perf vendor events intel: Update meteorlake to 1.03
perf vendor events intel: Add rocketlake events/metrics
perf vendor metrics intel: Make transaction metrics conditional
perf jevents: Support for has_event function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- A bunch of fixes/cleanups from the first part of the merge window,
mostly related to ACPI and vector as those were large
- Some documentation improvements, mostly related to the new code
- The "riscv,isa" DT key is deprecated
- Support for link-time dead code elimination
- Support for minor fault registration in userfaultd
- A handful of cleanups around CMO alternatives
* tag 'riscv-for-linus-6.5-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (23 commits)
riscv: mm: mark noncoherent_supported as __ro_after_init
riscv: mm: mark CBO relate initialization funcs as __init
riscv: errata: thead: only set cbom size & noncoherent during boot
riscv: Select HAVE_ARCH_USERFAULTFD_MINOR
RISC-V: Document the ISA string parsing rules for ACPI
risc-v: Fix order of IPI enablement vs RCU startup
mm: riscv: fix an unsafe pte read in huge_pte_alloc()
dt-bindings: riscv: deprecate riscv,isa
RISC-V: drop error print from riscv_hartid_to_cpuid()
riscv: Discard vector state on syscalls
riscv: move memblock_allow_resize() after linear mapping is ready
riscv: Enable ARCH_SUSPEND_POSSIBLE for s2idle
riscv: vdso: include vdso/vsyscall.h for vdso_data
selftests: Test RISC-V Vector's first-use handler
riscv: vector: clear V-reg in the first-use trap
riscv: vector: only enable interrupts in the first-use trap
RISC-V: Fix up some vector state related build failures
RISC-V: Document that V registers are clobbered on syscalls
riscv: disable HAVE_LD_DEAD_CODE_DATA_ELIMINATION for LLD
riscv: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION
...
|
|
Pull mode documentation updates from Jonathan Corbet:
"A half-dozen late arriving docs patches. They are mostly fixes, but we
also have a kernel-doc tweak for enums and the long-overdue removal of
the outdated and redundant patch-submission comments at the top of the
MAINTAINERS file"
* tag 'docs-6.5-2' of git://git.lwn.net/linux:
scripts: kernel-doc: support private / public marking for enums
Documentation: KVM: SEV: add a missing backtick
Documentation: ACPI: fix typo in ssdt-overlays.rst
Fix documentation of panic_on_warn
docs: remove the tips on how to submit patches from MAINTAINERS
docs: fix typo in zh_TW and zh_CN translation
|
