| Age | Commit message (Collapse) | Author |
|---|
|
API headers from libbpf should not be accessed directly from the
library's source directory. Instead, they should be exported with "make
install_headers". Let's make sure that resolve_btfids installs the
headers properly when building.
When descending from a parent Makefile, the specific output directories
for building the library and exporting the headers are configurable with
LIBBPF_OUT and LIBBPF_DESTDIR, respectively. This is in addition to
OUTPUT, on top of which those variables are constructed by default.
Also adjust the Makefile for the BPF selftests in order to point to the
(target) libbpf shared with other tools, instead of building a version
specific to resolve_btfids. Remove libbpf's order-only dependencies on
the include directories (they are created by libbpf and don't need to
exist beforehand).
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007194438.34443-5-quentin@isovalent.com
|
|
Bpftool relies on libbpf, therefore it relies on a number of headers
from the library and must be linked against the library. The Makefile
for bpftool exposes these objects by adding tools/lib as an include
directory ("-I$(srctree)/tools/lib"). This is a working solution, but
this is not the cleanest one. The risk is to involuntarily include
objects that are not intended to be exposed by the libbpf.
The headers needed to compile bpftool should in fact be "installed" from
libbpf, with its "install_headers" Makefile target. In addition, there
is one header which is internal to the library and not supposed to be
used by external applications, but that bpftool uses anyway.
Adjust the Makefile in order to install the header files properly before
compiling bpftool. Also copy the additional internal header file
(nlattr.h), but call it out explicitly. Build (and install headers) in a
subdirectory under bpftool/ instead of tools/lib/bpf/. When descending
from a parent Makefile, this is configurable by setting the OUTPUT,
LIBBPF_OUTPUT and LIBBPF_DESTDIR variables.
Also adjust the Makefile for BPF selftests, so as to reuse the (host)
libbpf compiled earlier and to avoid compiling a separate version of the
library just for bpftool.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007194438.34443-4-quentin@isovalent.com
|
|
It seems that the header file was never necessary to compile bpftool,
and it is not part of the headers exported from libbpf. Let's remove the
includes from prog.c and gen.c.
Fixes: d510296d331a ("bpftool: Use syscall/loader program in "prog load" and "gen skeleton" command.")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007194438.34443-3-quentin@isovalent.com
|
|
The "install_headers" target in libbpf's Makefile would unconditionally
export all API headers to the target directory. When those headers are
installed to compile another application, this means that make always
finds newer dependencies for the source files relying on those headers,
and deduces that the targets should be rebuilt.
Avoid that by making "install_headers" depend on the source header
files, and (re-)install them only when necessary.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007194438.34443-2-quentin@isovalent.com
|
|
New clang version changed ([0]) type name in dwarf from "long int" to "long",
this is causing btf_dump tests to fail.
[0] https://github.com/llvm/llvm-project/commit/f6a561c4d6754b13165a49990e8365d819f64c86
Signed-off-by: Yucong Sun <sunyucong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211008173139.1457407-1-fallentree@fb.com
|
|
Since commit 6c4fc209fcf9d ("bpf: remove useless version check for prog
load") these "version" sections, which result in bpf_attr.kern_version
being set, have been unnecessary.
Remove them so that it's obvious to folks using selftests as a guide that
"modern" BPF progs don't need this section.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007231234.2223081-1-davemarchevsky@fb.com
|
|
VMs running on upstream 5.12+ kernel support LBR. However,
bpf_get_branch_snapshot couldn't stop the LBR before too many entries
are flushed. Skip the hit/waste test for VMs before we find a proper fix
for LBR in VM.
Fixes: 025bd7c753aa ("selftests/bpf: Add test for bpf_get_branch_snapshot")
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007050231.728496-1-songliubraving@fb.com
|
|
Replace deprecated bpf_{map,program}__next APIs with newly added
bpf_object__next_{map,program} APIs, so that no compilation warnings
emit.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211003165844.4054931-3-hengqi.chen@gmail.com
|
|
Deprecate bpf_{map,program}__{prev,next} APIs. Replace them with
a new set of APIs named bpf_object__{prev,next}_{program,map} which
follow the libbpf API naming convention ([0]). No functionality changes.
[0] Closes: https://github.com/libbpf/libbpf/issues/296
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211003165844.4054931-2-hengqi.chen@gmail.com
|
|
BPF objects are not reloadable after unload. Users are expected to use
bpf_object__close() to unload and free up resources in one operation.
No need to expose bpf_object__unload() as a public API, deprecate it
([0]). Add bpf_object__unload() as an alias to internal
bpf_object_unload() and replace all bpf_object__unload() uses to avoid
compilation errors.
[0] Closes: https://github.com/libbpf/libbpf/issues/290
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211002161000.3854559-1-hengqi.chen@gmail.com
|
|
Currently the recursion test is hooking __htab_map_lookup_elem
function, which is invoked both from bpf_prog and bpf syscall.
But in our kernel build, the __htab_map_lookup_elem gets inlined
within the htab_map_lookup_elem, so it's not trigered and the
test fails.
Fixing this by using htab_map_delete_elem, which is not inlined
for bpf_prog calls (like htab_map_lookup_elem is) and is used
directly as pointer for map_delete_elem, so it won't disappear
by inlining.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/YVnfFTL/3T6jOwHI@krava
|
|
Recent-ish versions of make do no longer consider number signs ("#") as
comment symbols when they are inserted inside of a macro reference or in
a function invocation. In such cases, the symbols should not be escaped.
There are a few occurrences of "\#" in libbpf's and samples' Makefiles.
In the former, the backslash is harmless, because grep associates no
particular meaning to the escaped symbol and reads it as a regular "#".
In samples' Makefile, recent versions of make will pass the backslash
down to the compiler, making the probe fail all the time and resulting
in the display of a warning about "make headers_install" being required,
even after headers have been installed.
A similar issue has been addressed at some other locations by commit
9564a8cf422d ("Kbuild: fix # escaping in .cmd files for future Make").
Let's address it for libbpf's and samples' Makefiles in the same
fashion, by using a "$(pound)" variable (pulled from
tools/scripts/Makefile.include for libbpf, or re-defined for the
samples).
Reference for the change in make:
https://git.savannah.gnu.org/cgit/make.git/commit/?id=c6966b323811c37acedff05b57
Fixes: 2f3830412786 ("libbpf: Make libbpf_version.h non-auto-generated")
Fixes: 07c3bbdb1a9b ("samples: bpf: print a warning about headers_install")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211006111049.20708-1-quentin@isovalent.com
|
|
Add a test that validates that btf__add_btf() API is correctly copying
all the types from the source BTF into destination BTF object and
adjusts type IDs and string offsets properly.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211006051107.17921-4-andrii@kernel.org
|
|
Next patch will need to reuse BTF generation logic, which tests every
supported BTF kind, for testing btf__add_btf() APIs. So restructure
existing selftests and make it as a single subtest that uses bulk
VALIDATE_RAW_BTF() macro for raw BTF dump checking.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211006051107.17921-3-andrii@kernel.org
|
|
Add a bulk copying api, btf__add_btf(), that speeds up and simplifies
appending entire contents of one BTF object to another one, taking care
of copying BTF type data, adjusting resulting BTF type IDs according to
their new locations in the destination BTF object, as well as copying
and deduplicating all the referenced strings and updating all the string
offsets in new BTF types as appropriate.
This API is intended to be used from tools that are generating and
otherwise manipulating BTFs generically, such as pahole. In pahole's
case, this API is useful for speeding up parallelized BTF encoding, as
it allows pahole to offload all the intricacies of BTF type copying to
libbpf and handle the parallelization aspects of the process.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/bpf/20211006051107.17921-2-andrii@kernel.org
|
|
Instead of unconditionally performing push/pop on %rax/%rdx in case of
division/modulo, we can save a few bytes in case of destination register
being either BPF r0 (%rax) or r3 (%rdx) since the result is written in
there anyway.
Also, we do not need to copy the source to %r11 unless the source is either
%rax, %rdx or an immediate.
For example, before the patch:
22: push %rax
23: push %rdx
24: mov %rsi,%r11
27: xor %edx,%edx
29: div %r11
2c: mov %rax,%r11
2f: pop %rdx
30: pop %rax
31: mov %r11,%rax
After:
22: push %rdx
23: xor %edx,%edx
25: div %rsi
28: pop %rdx
Signed-off-by: Jie Meng <jmeng@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211002035626.2041910-1-jmeng@fb.com
|
|
This adds selftests that tests the success and failure path for modules
kfuncs (in presence of invalid kfunc calls) for both libbpf and
gen_loader. It also adds a prog_test kfunc_btf_id_list so that we can
add module BTF ID set from bpf_testmod.
This also introduces a couple of test cases to verifier selftests for
validating whether we get an error or not depending on if invalid kfunc
call remains after elimination of unreachable instructions.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-10-memxor@gmail.com
|
|
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
|
|
Preserve these calls as it allows verifier to succeed in loading the
program if they are determined to be unreachable after dead code
elimination during program load. If not, the verifier will fail at
runtime. This is done for ext->is_weak symbols similar to the case for
variable ksyms.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-8-memxor@gmail.com
|
|
This patch adds libbpf support for kernel module function call support.
The fd_array parameter is used during BPF program load to pass module
BTFs referenced by the program. insn->off is set to index into this
array, but starts from 1, because insn->off as 0 is reserved for
btf_vmlinux.
We try to use existing insn->off for a module, since the kernel limits
the maximum distinct module BTFs for kfuncs to 256, and also because
index must never exceed the maximum allowed value that can fit in
insn->off (INT16_MAX). In the future, if kernel interprets signed offset
as unsigned for kfunc calls, this limit can be increased to UINT16_MAX.
Also introduce a btf__find_by_name_kind_own helper to start searching
from module BTF's start id when we know that the BTF ID is not present
in vmlinux BTF (in find_ksym_btf_id).
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-7-memxor@gmail.com
|
|
This commit allows specifying the base BTF for resolving btf id
lists/sets during link time in the resolve_btfids tool. The base BTF is
set to NULL if no path is passed. This allows resolving BTF ids for
module kernel objects.
Also, drop the --no-fail option, as it is only used in case .BTF_ids
section is not present, instead make no-fail the default mode. The long
option name is same as that of pahole.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-5-memxor@gmail.com
|
|
This patch adds support for testing the encap (ip6ip6) mode of IOAM.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For this test we are exercising the VCAP ES0 block's ability to match on
a packet with a given VLAN ID, and push an ES0 TAG A with a VID derived
from VID_A_VAL plus the classified VLAN.
$eth3.200 is the generator port
$eth0 is the bridged DUT port that receives
$eth1 is the bridged DUT port that forwards and rewrites VID 200 to 300
on egress via VCAP ES0
$eth2 is the port that receives from the DUT port $eth1
Since the egress rewriting happens outside the bridging service, VID 300
does not need to be in the bridge VLAN table of $eth1.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There will be one more VLAN modification selftest added, this time for
egress. Rename the one that exists right now to be more specific.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Looks like when I wrote the selftests I was using a network manager that
brought up the ports automatically. In order to not rely on that, let
the script open them up.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
bpf-next 2021-10-02
We've added 85 non-merge commits during the last 15 day(s) which contain
a total of 132 files changed, 13779 insertions(+), 6724 deletions(-).
The main changes are:
1) Massive update on test_bpf.ko coverage for JITs as preparatory work for
an upcoming MIPS eBPF JIT, from Johan Almbladh.
2) Add a batched interface for RX buffer allocation in AF_XDP buffer pool,
with driver support for i40e and ice from Magnus Karlsson.
3) Add legacy uprobe support to libbpf to complement recently merged legacy
kprobe support, from Andrii Nakryiko.
4) Add bpf_trace_vprintk() as variadic printk helper, from Dave Marchevsky.
5) Support saving the register state in verifier when spilling <8byte bounded
scalar to the stack, from Martin Lau.
6) Add libbpf opt-in for stricter BPF program section name handling as part
of libbpf 1.0 effort, from Andrii Nakryiko.
7) Add a document to help clarifying BPF licensing, from Alexei Starovoitov.
8) Fix skel_internal.h to propagate errno if the loader indicates an internal
error, from Kumar Kartikeya Dwivedi.
9) Fix build warnings with -Wcast-function-type so that the option can later
be enabled by default for the kernel, from Kees Cook.
10) Fix libbpf to ignore STT_SECTION symbols in legacy map definitions as it
otherwise errors out when encountering them, from Toke Høiland-Jørgensen.
11) Teach libbpf to recognize specialized maps (such as for perf RB) and
internally remove BTF type IDs when creating them, from Hengqi Chen.
12) Various fixes and improvements to BPF selftests.
====================
Link: https://lore.kernel.org/r/20211002001327.15169-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change map definitions in BPF selftests to use BTF-defined
key/value types. This unifies the map definitions and ensures
libbpf won't emit warning about retrying map creation.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210930161456.3444544-3-hengqi.chen@gmail.com
|
|
A bunch of BPF maps do not support specifying BTF types for key and value.
This is non-uniform and inconvenient[0]. Currently, libbpf uses a retry
logic which removes BTF type IDs when BPF map creation failed. Instead
of retrying, this commit recognizes those specialized maps and removes
BTF type IDs when creating BPF map.
[0] Closes: https://github.com/libbpf/libbpf/issues/355
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210930161456.3444544-2-hengqi.chen@gmail.com
|
|
drivers/net/phy/bcm7xxx.c
d88fd1b546ff ("net: phy: bcm7xxx: Fixed indirect MMD operations")
f68d08c437f9 ("net: phy: bcm7xxx: Add EPHY entry for 72165")
net/sched/sch_api.c
b193e15ac69d ("net: prevent user from passing illegal stab size")
69508d43334e ("net_sched: Use struct_size() and flex_array_size() helpers")
Both cases trivial - adjacent code additions.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from mac80211, netfilter and bpf.
Current release - regressions:
- bpf, cgroup: assign cgroup in cgroup_sk_alloc when called from
interrupt
- mdio: revert mechanical patches which broke handling of optional
resources
- dev_addr_list: prevent address duplication
Previous releases - regressions:
- sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb
(NULL deref)
- Revert "mac80211: do not use low data rates for data frames with no
ack flag", fixing broadcast transmissions
- mac80211: fix use-after-free in CCMP/GCMP RX
- netfilter: include zone id in tuple hash again, minimize collisions
- netfilter: nf_tables: unlink table before deleting it (race -> UAF)
- netfilter: log: work around missing softdep backend module
- mptcp: don't return sockets in foreign netns
- sched: flower: protect fl_walk() with rcu (race -> UAF)
- ixgbe: fix NULL pointer dereference in ixgbe_xdp_setup
- smsc95xx: fix stalled rx after link change
- enetc: fix the incorrect clearing of IF_MODE bits
- ipv4: fix rtnexthop len when RTA_FLOW is present
- dsa: mv88e6xxx: 6161: use correct MAX MTU config method for this
SKU
- e100: fix length calculation & buffer overrun in ethtool::get_regs
Previous releases - always broken:
- mac80211: fix using stale frag_tail skb pointer in A-MSDU tx
- mac80211: drop frames from invalid MAC address in ad-hoc mode
- af_unix: fix races in sk_peer_pid and sk_peer_cred accesses (race
-> UAF)
- bpf, x86: Fix bpf mapping of atomic fetch implementation
- bpf: handle return value of BPF_PROG_TYPE_STRUCT_OPS prog
- netfilter: ip6_tables: zero-initialize fragment offset
- mhi: fix error path in mhi_net_newlink
- af_unix: return errno instead of NULL in unix_create1() when over
the fs.file-max limit
Misc:
- bpf: exempt CAP_BPF from checks against bpf_jit_limit
- netfilter: conntrack: make max chain length random, prevent
guessing buckets by attackers
- netfilter: nf_nat_masquerade: make async masq_inet6_event handling
generic, defer conntrack walk to work queue (prevent hogging RTNL
lock)"
* tag 'net-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
af_unix: fix races in sk_peer_pid and sk_peer_cred accesses
net: stmmac: fix EEE init issue when paired with EEE capable PHYs
net: dev_addr_list: handle first address in __hw_addr_add_ex
net: sched: flower: protect fl_walk() with rcu
net: introduce and use lock_sock_fast_nested()
net: phy: bcm7xxx: Fixed indirect MMD operations
net: hns3: disable firmware compatible features when uninstall PF
net: hns3: fix always enable rx vlan filter problem after selftest
net: hns3: PF enable promisc for VF when mac table is overflow
net: hns3: fix show wrong state when add existing uc mac address
net: hns3: fix mixed flag HCLGE_FLAG_MQPRIO_ENABLE and HCLGE_FLAG_DCB_ENABLE
net: hns3: don't rollback when destroy mqprio fail
net: hns3: remove tc enable checking
net: hns3: do not allow call hns3_nic_net_open repeatedly
ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setup
net: bridge: mcast: Associate the seqcount with its protecting lock.
net: mdio-ipq4019: Fix the error for an optional regs resource
net: hns3: fix hclge_dbg_dump_tm_pg() stack usage
net: mdio: mscc-miim: Fix the mdio controller
af_unix: Return errno instead of NULL in unix_create1().
...
|
|
There are several test cases in the bpf directory are still using
exit 0 when they need to be skipped. Use kselftest framework skip
code instead so it can help us to distinguish the return status.
Criterion to filter out what should be fixed in bpf directory:
grep -r "exit 0" -B1 | grep -i skip
This change might cause some false-positives if people are running
these test scripts directly and only checking their return codes,
which will change from 0 to 4. However I think the impact should be
small as most of our scripts here are already using this skip code.
And there will be no such issue if running them with the kselftest
framework.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210929051250.13831-1-po-hsu.lin@canonical.com
|
|
When the loader indicates an internal error (result of a checked bpf
system call), it returns the result in attr.test.retval. However, tests
that rely on ASSERT_OK_PTR on NULL (returned from light skeleton) may
miss that NULL denotes an error if errno is set to 0. This would result
in skel pointer being NULL, while ASSERT_OK_PTR returning 1, leading to
a SEGV on dereference of skel, because libbpf_get_error relies on the
assumption that errno is always set in case of error for ptr == NULL.
In particular, this was observed for the ksyms_module test. When
executed using `./test_progs -t ksyms`, prior tests manipulated errno
and the test didn't crash when it failed at ksyms_module load, while
using `./test_progs -t ksyms_module` crashed due to errno being
untouched.
Fixes: 67234743736a (libbpf: Generate loader program out of BPF ELF file.)
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210927145941.1383001-11-memxor@gmail.com
|
|
The previous patch to ignore STT_SECTION symbols only added the ignore
condition in one of them. This fails if there's more than one map
definition in the 'maps' section, because the subsequent modulus check will
fail, resulting in error messages like:
libbpf: elf: unable to determine legacy map definition size in ./xdpdump_xdp.o
Fix this by also ignoring STT_SECTION in the first loop.
Fixes: c3e8c44a9063 ("libbpf: Ignore STT_SECTION symbols in 'maps' section")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210929213837.832449-1-toke@redhat.com
|
|
Align gen_loader data to 8 byte boundary to make sure union bpf_attr,
bpf_insns and other structs are aligned.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210927145941.1383001-9-memxor@gmail.com
|
|
Cleanup code uses while (cpu++ < cpu_cnt) for closing fds, which means
it starts iterating from 1 for closing fds. If the first fd is -1, it
skips over it and closes garbage fds (typically zero) in the remaining
array. This leads to test failures for future tests when they end up
storing fd 0 (as the slot becomes free due to close(0)) in ldimm64's BTF
fd, ending up trying to match module BTF id with vmlinux.
This was observed as spurious CI failure for the ksym_module_libbpf and
module_attach tests. The test ends up closing fd 0 and breaking libbpf's
assumption that module BTF fd will always be > 0, which leads to the
kernel thinking that we are pointing to a BTF ID in vmlinux BTF.
Fixes: 025bd7c753aa (selftests/bpf: Add test for bpf_get_branch_snapshot)
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210927145941.1383001-12-memxor@gmail.com
|
|
clang build kernel failed the selftest probe_user.
$ ./test_progs -t probe_user
$ ...
$ test_probe_user:PASS:get_kprobe_res 0 nsec
$ test_probe_user:FAIL:check_kprobe_res wrong kprobe res from probe read: 0.0.0.0:0
$ #94 probe_user:FAIL
The test attached to kernel function __sys_connect(). In net/socket.c, we have
int __sys_connect(int fd, struct sockaddr __user *uservaddr, int addrlen)
{
......
}
...
SYSCALL_DEFINE3(connect, int, fd, struct sockaddr __user *, uservaddr,
int, addrlen)
{
return __sys_connect(fd, uservaddr, addrlen);
}
The gcc compiler (8.5.0) does not inline __sys_connect() in syscall entry
function. But latest clang trunk did the inlining. So the bpf program
is not triggered.
To make the test more reliable, let us kprobe the syscall entry function
instead. Note that x86_64, arm64 and s390 have syscall wrappers and they have
to be handled specially.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210929033000.3711921-1-yhs@fb.com
|
|
"?:" is a GNU C extension, some environment has warning flags for its
use, or even prohibit it directly. This patch avoid triggering these
problems by simply expand it to its full form, no functionality change.
Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210928184221.1545079-1-fallentree@fb.com
|
|
Update "sk_lookup/" definition to be a stand-alone type specifier,
with backwards-compatible prefix match logic in non-libbpf-1.0 mode.
Currently in selftests all the "sk_lookup/<whatever>" uses just use
<whatever> for duplicated unique name encoding, which is redundant as
BPF program's name (C function name) uniquely and descriptively
identifies the intended use for such BPF programs.
With libbpf's SEC_DEF("sk_lookup") definition updated, switch existing
sk_lookup programs to use "unqualified" SEC("sk_lookup") section names,
with no random text after it.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-11-andrii@kernel.org
|
|
Implement strict ELF section name handling for BPF programs. It utilizes
`libbpf_set_strict_mode()` framework and adds new flag: LIBBPF_STRICT_SEC_NAME.
If this flag is set, libbpf will enforce exact section name matching for
a lot of program types that previously allowed just partial prefix
match. E.g., if previously SEC("xdp_whatever_i_want") was allowed, now
in strict mode only SEC("xdp") will be accepted, which makes SEC("")
definitions cleaner and more structured. SEC() now won't be used as yet
another way to uniquely encode BPF program identifier (for that
C function name is better and is guaranteed to be unique within
bpf_object). Now SEC() is strictly BPF program type and, depending on
program type, extra load/attach parameter specification.
Libbpf completely supports multiple BPF programs in the same ELF
section, so multiple BPF programs of the same type/specification easily
co-exist together within the same bpf_object scope.
Additionally, a new (for now internal) convention is introduced: section
name that can be a stand-alone exact BPF program type specificator, but
also could have extra parameters after '/' delimiter. An example of such
section is "struct_ops", which can be specified by itself, but also
allows to specify the intended operation to be attached to, e.g.,
"struct_ops/dctcp_init". Note, that "struct_ops_some_op" is not allowed.
Such section definition is specified as "struct_ops+".
This change is part of libbpf 1.0 effort ([0], [1]).
[0] Closes: https://github.com/libbpf/libbpf/issues/271
[1] https://github.com/libbpf/libbpf/wiki/Libbpf:-the-road-to-v1.0#stricter-and-more-uniform-bpf-program-section-name-sec-handling
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-10-andrii@kernel.org
|
|
Complete SEC() table refactoring towards unified form by rewriting
BPF_APROG_SEC and BPF_EAPROG_SEC definitions with
SEC_DEF(SEC_ATTACHABLE_OPT) (for optional expected_attach_type) and
SEC_DEF(SEC_ATTACHABLE) (mandatory expected_attach_type), respectively.
Drop BPF_APROG_SEC, BPF_EAPROG_SEC, and BPF_PROG_SEC_IMPL macros after
that, leaving SEC_DEF() macro as the only one used.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-9-andrii@kernel.org
|
|
Refactor ELF section handler definitions table to use a set of flags and
unified SEC_DEF() macro. This allows for more succinct and table-like
set of definitions, and allows to more easily extend the logic without
adding more verbosity (this is utilized in later patches in the series).
This approach is also making libbpf-internal program pre-load callback
not rely on bpf_sec_def definition, which demonstrates that future
pluggable ELF section handlers will be able to achieve similar level of
integration without libbpf having to expose extra types and APIs.
For starters, update SEC_DEF() definitions and make them more succinct.
Also convert BPF_PROG_SEC() and BPF_APROG_COMPAT() definitions to
a common SEC_DEF() use.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-8-andrii@kernel.org
|
|
Move closer to not relying on bpf_sec_def internals that won't be part
of public API, when pluggable SEC() handlers will be allowed. Drop
pre-calculated prefix length, and in various helpers don't rely on this
prefix length availability. Also minimize reliance on knowing
bpf_sec_def's prefix for few places where section prefix shortcuts are
supported (e.g., tp vs tracepoint, raw_tp vs raw_tracepoint).
Given checking some string for having a given string-constant prefix is
such a common operation and so annoying to be done with pure C code, add
a small macro helper, str_has_pfx(), and reuse it throughout libbpf.c
where prefix comparison is performed. With __builtin_constant_p() it's
possible to have a convenient helper that checks some string for having
a given prefix, where prefix is either string literal (or compile-time
known string due to compiler optimization) or just a runtime string
pointer, which is quite convenient and saves a lot of typing and string
literal duplication.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-7-andrii@kernel.org
|
|
Refactor internals of libbpf to allow adding custom SEC() handling logic
easily from outside of libbpf. To that effect, each SEC()-handling
registration sets mandatory program type/expected attach type for
a given prefix and can provide three callbacks called at different
points of BPF program lifetime:
- init callback for right after bpf_program is initialized and
prog_type/expected_attach_type is set. This happens during
bpf_object__open() step, close to the very end of constructing
bpf_object, so all the libbpf APIs for querying and updating
bpf_program properties should be available;
- pre-load callback is called right before BPF_PROG_LOAD command is
called in the kernel. This callbacks has ability to set both
bpf_program properties, as well as program load attributes, overriding
and augmenting the standard libbpf handling of them;
- optional auto-attach callback, which makes a given SEC() handler
support auto-attachment of a BPF program through bpf_program__attach()
API and/or BPF skeletons <skel>__attach() method.
Each callbacks gets a `long cookie` parameter passed in, which is
specified during SEC() handling. This can be used by callbacks to lookup
whatever additional information is necessary.
This is not yet completely ready to be exposed to the outside world,
mainly due to non-public nature of struct bpf_prog_load_params. Instead
of making it part of public API, we'll wait until the planned low-level
libbpf API improvements for BPF_PROG_LOAD and other typical bpf()
syscall APIs, at which point we'll have a public, probably OPTS-based,
way to fully specify BPF program load parameters, which will be used as
an interface for custom pre-load callbacks.
But this change itself is already a good first step to unify the BPF
program hanling logic even within the libbpf itself. As one example, all
the extra per-program type handling (sleepable bit, attach_btf_id
resolution, unsetting optional expected attach type) is now more obvious
and is gathered in one place.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-6-andrii@kernel.org
|
|
Normalize all the other non-conforming SEC() usages across all
selftests. This is in preparation for libbpf to start to enforce
stricter SEC() rules in libbpf 1.0 mode.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-5-andrii@kernel.org
|
|
Convert all SEC("classifier*") uses to a new and strict SEC("tc")
section name. In reference_tracking selftests switch from ambiguous
searching by program title (section name) to non-ambiguous searching by
name in some selftests, getting closer to completely removing
bpf_object__find_program_by_title().
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-4-andrii@kernel.org
|
|
Convert almost all SEC("xdp_blah") uses to strict SEC("xdp") to comply
with strict libbpf 1.0 logic of exact section name match for XDP program
types. There is only one exception, which is only tested through
iproute2 and defines multiple XDP programs within the same BPF object.
Given iproute2 still works in non-strict libbpf mode and it doesn't have
means to specify XDP programs by its name (not section name/title),
leave that single file alone for now until iproute2 gains lookup by
function/program name.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-3-andrii@kernel.org
|
|
As argued in [0], add "tc" ELF section definition for SCHED_CLS BPF
program type. "classifier" is a misleading terminology and should be
migrated away from.
[0] https://lore.kernel.org/bpf/270e27b1-e5be-5b1c-b343-51bd644d0747@iogearbox.net/
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-2-andrii@kernel.org
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-09-28
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 14 day(s) which contain
a total of 11 files changed, 139 insertions(+), 53 deletions(-).
The main changes are:
1) Fix MIPS JIT jump code emission for too large offsets, from Piotr Krysiuk.
2) Fix x86 JIT atomic/fetch emission when dst reg maps to rax, from Johan Almbladh.
3) Fix cgroup_sk_alloc corner case when called from interrupt, from Daniel Borkmann.
4) Fix segfault in libbpf's linker for objects without BTF, from Kumar Kartikeya Dwivedi.
5) Fix bpf_jit_charge_modmem for applications with CAP_BPF, from Lorenz Bauer.
6) Fix return value handling for struct_ops BPF programs, from Hou Tao.
7) Various fixes to BPF selftests, from Jiri Benc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
,
|
|
It's not enough to set net.ipv4.conf.all.rp_filter=0, that does not override
a greater rp_filter value on the individual interfaces. We also need to set
net.ipv4.conf.default.rp_filter=0 before creating the interfaces. That way,
they'll also get their own rp_filter value of zero.
Fixes: 0fde56e4385b0 ("selftests: bpf: add test_lwt_ip_encap selftest")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/b1cdd9d469f09ea6e01e9c89a6071c79b7380f89.1632386362.git.jbenc@redhat.com
|
|
When building bpf selftest with make -j, I'm randomly getting build failures
such as this one:
In file included from progs/bpf_flow.c:19:
[...]/tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:11:10: fatal error: 'bpf_helper_defs.h' file not found
#include "bpf_helper_defs.h"
^~~~~~~~~~~~~~~~~~~
The file that fails the build varies between runs but it's always in the
progs/ subdir.
The reason is a missing make dependency on libbpf for the .o files in
progs/. There was a dependency before commit 3ac2e20fba07e but that commit
removed it to prevent unneeded rebuilds. However, that only works if libbpf
has been built already; the 'wildcard' prerequisite does not trigger when
there's no bpf_helper_defs.h generated yet.
Keep the libbpf as an order-only prerequisite to satisfy both goals. It is
always built before the progs/ objects but it does not trigger unnecessary
rebuilds by itself.
Fixes: 3ac2e20fba07e ("selftests/bpf: BPF object files should depend only on libbpf headers")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/ee84ab66436fba05a197f952af23c98d90eb6243.1632758415.git.jbenc@redhat.com
|
