| Age | Commit message (Collapse) | Author |
|---|
|
Perf doesn't support mixed events from different PMUs (except software
event) in a group. The perf stat should output <not counted>/<not
supported> for all events, but it doesn't. For example,
perf stat -e '{cycles,uncore_imc_5/umask=0xF,event=0x4/,instructions}'
<not counted> cycles
<not supported> uncore_imc_5/umask=0xF,event=0x4/
1,024,300 instructions
If perf fails to open an event, it doesn't error out directly. It will
disable some features and retry, until the event is opened or all
features are disabled. The disabled features will not be re-enabled. The
group read is one of these features.
For the example as above, the IMC event and the leader event "cycles"
are from different PMUs. Opening the IMC event must fail. The group read
feature must be disabled for IMC event and the followed event
"instructions". The "instructions" event has the same PMU as the leader
"cycles". It can be opened successfully. Since the group read feature
has been disabled, the "instructions" event will be read as a single
event, which definitely has a value.
The group read fallback is still useful for the case which kernel
doesn't support group read. It is good enough to be handled only by the
leader.
For the fallback request from members, it must be caused by an error.
The fallback only breaks the semantics of group. Limit the group read
fallback only for the leader.
Committer testing:
On a broadwell t450s notebook:
Before:
# perf stat -e '{cycles,unc_cbo_cache_lookup.read_i,instructions}' sleep 1
Performance counter stats for 'sleep 1':
<not counted> cycles
<not supported> unc_cbo_cache_lookup.read_i
818,206 instructions
1.003170887 seconds time elapsed
Some events weren't counted. Try disabling the NMI watchdog:
echo 0 > /proc/sys/kernel/nmi_watchdog
perf stat ...
echo 1 > /proc/sys/kernel/nmi_watchdog
After:
# perf stat -e '{cycles,unc_cbo_cache_lookup.read_i,instructions}' sleep 1
Performance counter stats for 'sleep 1':
<not counted> cycles
<not supported> unc_cbo_cache_lookup.read_i
<not counted> instructions
1.001380511 seconds time elapsed
Some events weren't counted. Try disabling the NMI watchdog:
echo 0 > /proc/sys/kernel/nmi_watchdog
perf stat ...
echo 1 > /proc/sys/kernel/nmi_watchdog
#
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Agustin Vega-Frias <agustinv@codeaurora.org>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Fixes: 82bf311e15d2 ("perf stat: Use group read for event groups")
Link: http://lkml.kernel.org/r/1524594014-79243-3-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Perf doesn't support mixed events from different PMUs (except software
event) in a group. For this case, only "<not counted>" or "<not
supported>" are printed out. There is no hint which guides users to fix
the issue.
Checking the PMU type of events to determine if they are from the same
PMU. There may be false alarm for the checking. E.g. the core PMU has
different PMU type. But it should not happen often.
The false alarm can also be tolerated, because:
- It only happens on error path.
- It just provides a possible solution for the issue.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Agustin Vega-Frias <agustinv@codeaurora.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1524594014-79243-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When counting uncore event with alias, core event is mistakenly
involved, for example:
perf stat --no-merge -e "unc_m_cas_count.all" -C0 sleep 1
Performance counter stats for 'CPU(s) 0':
0 unc_m_cas_count.all [uncore_imc_4]
0 unc_m_cas_count.all [uncore_imc_2]
0 unc_m_cas_count.all [uncore_imc_0]
153,640 unc_m_cas_count.all [cpu]
0 unc_m_cas_count.all [uncore_imc_5]
25,026 unc_m_cas_count.all [uncore_imc_3]
0 unc_m_cas_count.all [uncore_imc_1]
1.001447890 seconds time elapsed
The reason is that current implementation doesn't check PMU name of a
event when adding its alias into the alias list for core PMU. The
uncore event aliases are mistakenly added.
This bug was introduced in:
commit 14b22ae028de ("perf pmu: Add helper function is_pmu_core to
detect PMU CORE devices")
Checking the PMU name for all PMUs on X86 and other architectures except
ARM.
There is no behavior change for ARM.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Agustin Vega-Frias <agustinv@codeaurora.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Fixes: 14b22ae028de ("perf pmu: Add helper function is_pmu_core to detect PMU CORE devices")
Link: http://lkml.kernel.org/r/1524594014-79243-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Command 'perf record' calls:
cmd_report()
record__auxtrace_init()
auxtrace_record__init()
On s390 function auxtrace_record__init() returns random return value due
to missing initialization.
This sometime causes 'perf record' to exit immediately without error
message and creating a perf.data file.
Fix this by setting error the return code to zero before returning from
platform specific functions which may not set the error code in call
cases.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180423142940.21143-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Several options were incorrectly described, some lacked describing
required arguments while others were simply not documented, fix it.
Signed-off-by: Sangwon Hong <qpakzk@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1524382146-19609-1-git-send-email-qpakzk@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
.. and other related fields that do not need to be enabled
for events that have sampling leader.
It fixes the perf top usage Ingo reported broken:
# perf top -e '{cycles,msr/aperf/}:S'
The 'msr/aperf/' event is configured for write_back sampling, which is
not allowed by the MSR PMU, so it fails to create the event.
Adjusting related attr test.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180423090823.32309-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently all the event parsing fails end up in the event_pmu rule, and
display misleading help like:
$ perf stat -e inst kill
event syntax error: 'inst'
\___ Cannot find PMU `inst'. Missing kernel support?
...
The reason is that the event_pmu is too strong and match also single
string. Changing it to force the '/' separators to be part of the rule,
and getting the proper error now:
$ perf stat -e inst kill
event syntax error: 'inst'
\___ parser error
Run 'perf list' for a list of valid events
...
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reported-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180423090823.32309-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The 'perf stat' fallback for EACCES error sets the exclude_kernel
perf_event_attr and tries perf_event_open() again with it. In addition,
it also changes the name of the event to reflect that change by adding
the 'u' modifier.
But it does not take into account the '/' separator, so the event name
can end up mangled, like: (note the '/:' characters)
$ perf stat -e cpu/cpu-cycles/ kill
...
386,832 cpu/cpu-cycles/:u
Adding the code to check on the '/' separator and set the following
correct event name:
$ perf stat -e cpu/cpu-cycles/ kill
...
388,548 cpu/cpu-cycles/u
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180423090823.32309-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf test case 58 (record+probe_libc_inet_pton.sh) executed on s390x
using kernel 4.16.0rc3 displays this result:
# perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
probe_libc:inet_pton: (3ffa0240448)
__GI___inet_pton (/usr/lib64/libc-2.26.so)
gaih_inet (inlined)
__GI_getaddrinfo (inlined)
main (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
_start (/usr/bin/ping)
After I installed kernel 4.16.0 the same tests uses commands:
# perf record -e probe_libc:inet_pton/call-graph=dwarf/
-o /tmp/perf.data.abc ping -6 -c 1 ::1
# perf script -i /tmp/perf.data.abc
and displays:
ping 39048 [006] 84230.381198: probe_libc:inet_pton: (3ffa0240448)
140448 __GI___inet_pton (/usr/lib64/libc-2.26.so)
fbde1 gaih_inet (inlined)
fe2b9 __GI_getaddrinfo (inlined)
398d main (/usr/bin/ping)
Nothing else changed including glibc elfutils and other libraries picked
up by the build.
The entries for __libc_start_main and _start are missing.
I bisected missing __libc_start_main and _start to commit
Fixes: 3d20c6246690 ("perf unwind: Unwind with libdw doesn't take symfs into account")
When I undo this commit I get this call stack on s390:
[root@s35lp76 perf]# ./perf script -i /tmp/perf.data.abc
ping 39048 [006] 84230.381198: probe_libc:inet_pton: (3ffa0240448)
140448 __GI___inet_pton (/usr/lib64/libc-2.26.so)
fbde1 gaih_inet (inlined)
fe2b9 __GI_getaddrinfo (inlined)
398d main (/usr/bin/ping)
22fbd __libc_start_main (/usr/lib64/libc-2.26.so)
457b _start (/usr/bin/ping)
Looks like dwarf functions dwfl_xxx create different call back stack
trace when using file /usr/lib/debug/usr/bin/ping-20161105-7.fc27.s390x.debug
instead of file /usr/bin/ping.
Fix this test case on s390 and do not expect any call back stack entry
after the main() function. Also be more robust and accept a leading
__GI_ prefix in front of getaddrinfo.
On x86 this test case shows the same call stack using both kernel
versions 4.16.0rc3 and 4.16.0 and also stops at main:
[root@f27 perf]# ./perf script -i /tmp/perf.data.tmr
ping 4446 [000] 172.027088: probe_libc:inet_pton: (7fdfa08c93c0)
1393c0 __GI___inet_pton (/usr/lib64/libc-2.26.so)
fe60d getaddrinfo (/usr/lib64/libc-2.26.so)
2f40 main (/usr/bin/ping)
[root@f27 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Martin Vuille <jpmv27@aim.com>
Link: http://lkml.kernel.org/r/20180423082428.7930-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Make the type field in pmu-events/arch/s390/mapfile.cvs more generic to
match the created cpuid string for s390.
The pattern also checks for the counter first version number and counter
second version number ([13]\.[1-5]) and the authorization field which
follows.
These numbers do not exist in the cpuid identification string when perf
commands are executed on a z/VM environment (which does not support CPU
counter measurement facility).
CPUID string for LPAR:
cpuid : IBM,3906,704,M03,3.5,002f
CPUID string for z/VM:
cpuid : IBM,2964,702,N96
This allows the removal of s390 specific cpuid compare code and uses the
common compare function with its regular expression matching algorithm.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180423081745.3672-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
map_groups__fixup_end() was called to set the end addresses of kernel
and module maps. But now since machine__create_modules() sets the end
address of modules properly, the only remaining piece is the kernel map.
We can set it with adjacent module's address directly instead of calling
map_groups__fixup_end(). If there's no module after the kernel map, the
end address will be ~0ULL.
Since it also changes the start address of the kernel map, it needs to
re-insert the map to the kmaps in order to keep a correct ordering. Kim
reported that it caused problems on ARM64.
Reported-by: Kim Phillips <kim.phillips@arm.com>
Tested-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20180419235915.GA19067@sejong
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit 65c79230576 tried to clear the custom firmware path on exit by
writing a single space to the firmware_class.path parameter. This
doesn't work because nothing strips this space from the value stored
and fw_get_filesystem_firmware() only ignores zero-length paths.
Instead, write a null byte.
Fixes: 0a8adf58475 ("test: add firmware_class loader test")
Fixes: 65c79230576 ("test_firmware: fix setting old custom fw path back on exit")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
List all the scripts invoked by fw_run_tests.sh, so that
"make TARGETS=firmware install" keeps working.
Fixes: 29a1c00ce1df8 ("test_firmware: add simple firmware firmware test ...")
Fixes: b3cf21fae1fe0 ("test_firmware: test three firmware kernel configs ...")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2018-04-21
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a deadlock between mm->mmap_sem and bpf_event_mutex when
one task is detaching a BPF prog via perf_event_detach_bpf_prog()
and another one dumping through bpf_prog_array_copy_info(). For
the latter we move the copy_to_user() out of the bpf_event_mutex
lock to fix it, from Yonghong.
2) Fix test_sock and test_sock_addr.sh failures. The former was
hitting rlimit issues and the latter required ping to specify
the address family, from Yonghong.
3) Remove a dead check in sockmap's sock_map_alloc(), from Jann.
4) Add generated files to BPF kselftests gitignore that were previously
missed, from Anders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A larger set of updates for perf.
Kernel:
- Handle the SBOX uncore monitoring correctly on Broadwell CPUs which
do not have SBOX.
- Store context switch out type in PERF_RECORD_SWITCH[_CPU_WIDE]. The
percentage of preempting and non-preempting context switches help
understanding the nature of workloads (CPU or IO bound) that are
running on a machine. This adds the kernel facility and userspace
changes needed to show this information in 'perf script' and 'perf
report -D' (Alexey Budankov)
- Remove a WARN_ON() in the trace/kprobes code which is pointless
because the return error code is already telling the caller what's
wrong.
- Revert a fugly workaround for clang BPF targets.
- Fix sample_max_stack maximum check and do not proceed when an error
has been detect, return them to avoid misidentifying errors (Jiri
Olsa)
- Add SPDX idenitifiers and get rid of GPL boilderplate.
Tools:
- Synchronize kernel ABI headers, v4.17-rc1 (Ingo Molnar)
- Support MAP_FIXED_NOREPLACE, noticed when updating the
tools/include/ copies (Arnaldo Carvalho de Melo)
- Add '\n' at the end of parse-options error messages (Ravi Bangoria)
- Add s390 support for detailed/verbose PMU event description (Thomas
Richter)
- perf annotate fixes and improvements:
* Allow showing offsets in more than just jump targets, use the
new 'O' hotkey in the TUI, config ~/.perfconfig
annotate.offset_level for it and for --stdio2 (Arnaldo Carvalho
de Melo)
* Use the resolved variable names from objdump disassembled lines
to make them more compact, just like was already done for some
instructions, like "mov", this eventually will be done more
generally, but lets now add some more to the existing mechanism
(Arnaldo Carvalho de Melo)
- perf record fixes:
* Change warning for missing topology sysfs entry to debug, as not
all architectures have those files, s390 being one of those
(Thomas Richter)
* Remove old error messages about things that unlikely to be the
root cause in modern systems (Andi Kleen)
- perf sched fixes:
* Fix -g/--call-graph documentation (Takuya Yamamoto)
- perf stat:
* Enable 1ms interval for printing event counters values in
(Alexey Budankov)
- perf test fixes:
* Run dwarf unwind on arm32 (Kim Phillips)
* Remove unused ptrace.h include from LLVM test, sidesteping older
clang's lack of support for some asm constructs (Arnaldo
Carvalho de Melo)
* Fixup BPF test using epoll_pwait syscall function probe, to cope
with the syscall routines renames performed in this development
cycle (Arnaldo Carvalho de Melo)
- perf version fixes:
* Do not print info about HAVE_LIBAUDIT_SUPPORT in 'perf version
--build-options' when HAVE_SYSCALL_TABLE_SUPPORT is true, as
libaudit won't be used in that case, print info about
syscall_table support instead (Jin Yao)
- Build system fixes:
* Use HAVE_..._SUPPORT used consistently (Jin Yao)
* Restore READ_ONCE() C++ compatibility in tools/include (Mark
Rutland)
* Give hints about package names needed to build jvmti (Arnaldo
Carvalho de Melo)"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
perf/x86/intel/uncore: Fix SBOX support for Broadwell CPUs
perf/x86/intel/uncore: Revert "Remove SBOX support for Broadwell server"
coresight: Move to SPDX identifier
perf test BPF: Fixup BPF test using epoll_pwait syscall function probe
perf tests mmap: Show which tracepoint is failing
perf tools: Add '\n' at the end of parse-options error messages
perf record: Remove suggestion to enable APIC
perf record: Remove misleading error suggestion
perf hists browser: Clarify top/report browser help
perf mem: Allow all record/report options
perf trace: Support MAP_FIXED_NOREPLACE
perf: Remove superfluous allocation error check
perf: Fix sample_max_stack maximum check
perf: Return proper values for user stack errors
perf list: Add s390 support for detailed/verbose PMU event description
perf script: Extend misc field decoding with switch out event type
perf report: Extend raw dump (-D) out with switch out event type
perf/core: Store context switch out type in PERF_RECORD_SWITCH[_CPU_WIDE]
tools/headers: Synchronize kernel ABI headers, v4.17-rc1
trace_kprobe: Remove warning message "Could not insert probe at..."
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Thomas Gleixner:
"A single fix for objtool so it uses the host C and LD flags and not
the target ones"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Support HOSTCFLAGS and HOSTLDFLAGS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A regression fix, new unit test infrastructure and a build fix:
- Regression fix addressing support for the new NVDIMM label storage
area access commands (_LSI, _LSR, and _LSW).
The Intel specific version of these commands communicated the
"Device Locked" status on the label-storage-information command.
However, these new commands (standardized in ACPI 6.2) communicate
the "Device Locked" status on the label-storage-read command, and
the driver was missing the indication.
Reading from locked persistent memory is similar to reading
unmapped PCI memory space, returns all 1's.
- Unit test infrastructure is added to regression test the "Device
Locked" detection failure.
- A build fix is included to allow the "of_pmem" driver to be built
as a module and translate an Open Firmware described device to its
local numa node"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
MAINTAINERS: Add backup maintainers for libnvdimm and DAX
device-dax: allow MAP_SYNC to succeed
Revert "libnvdimm, of_pmem: workaround OF_NUMA=n build error"
libnvdimm, of_pmem: use dev_to_node() instead of of_node_to_nid()
tools/testing/nvdimm: enable labels for nfit_test.1 dimms
tools/testing/nvdimm: fix missing newline in nfit_test_dimm 'handle' attribute
tools/testing/nvdimm: support nfit_test_dimm attributes under nfit_test.1
tools/testing/nvdimm: allow custom error code injection
libnvdimm, dimm: handle EACCES failures from label reads
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fix from Shuah Khan:
"A fix from Michael Ellerman to not run dnotify_test by default to
prevent Kselftest running forever"
* tag 'linux-kselftest-4.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/filesystems: Don't run dnotify_test by default
|
|
Pull networking fixes from David Miller:
1) Unbalanced refcounting in TIPC, from Jon Maloy.
2) Only allow TCP_MD5SIG to be set on sockets in close or listen state.
Once the connection is established it makes no sense to change this.
From Eric Dumazet.
3) Missing attribute validation in neigh_dump_table(), also from Eric
Dumazet.
4) Fix address comparisons in SCTP, from Xin Long.
5) Neigh proxy table clearing can deadlock, from Wolfgang Bumiller.
6) Fix tunnel refcounting in l2tp, from Guillaume Nault.
7) Fix double list insert in team driver, from Paolo Abeni.
8) af_vsock.ko module was accidently made unremovable, from Stefan
Hajnoczi.
9) Fix reference to freed llc_sap object in llc stack, from Cong Wang.
10) Don't assume netdevice struct is DMA'able memory in virtio_net
driver, from Michael S. Tsirkin.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits)
net/smc: fix shutdown in state SMC_LISTEN
bnxt_en: Fix memory fault in bnxt_ethtool_init()
virtio_net: sparse annotation fix
virtio_net: fix adding vids on big-endian
virtio_net: split out ctrl buffer
net: hns: Avoid action name truncation
docs: ip-sysctl.txt: fix name of some ipv6 variables
vmxnet3: fix incorrect dereference when rxvlan is disabled
llc: hold llc_sap before release_sock()
MAINTAINERS: Direct networking documentation changes to netdev
atm: iphase: fix spelling mistake: "Tansmit" -> "Transmit"
net: qmi_wwan: add Wistron Neweb D19Q1
net: caif: fix spelling mistake "UKNOWN" -> "UNKNOWN"
net: stmmac: Disable ACS Feature for GMAC >= 4
net: mvpp2: Fix DMA address mask size
net: change the comment of dev_mc_init
net: qualcomm: rmnet: Fix warning seen with fill_info
tun: fix vlan packet truncation
tipc: fix infinite loop when dumping link monitor summary
tipc: fix use-after-free in tipc_nametbl_stop
...
|
|
Move CoreSight headers to the SPDX identifier.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1524089118-27595-1-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The bpf selftests test_sock and test_sock_addr.sh failed
in my test machine. The failure looks like:
$ ./test_sock
Test case: bind4 load with invalid access: src_ip6 .. [PASS]
Test case: bind4 load with invalid access: mark .. [PASS]
Test case: bind6 load with invalid access: src_ip4 .. [PASS]
Test case: sock_create load with invalid access: src_port .. [PASS]
Test case: sock_create load w/o expected_attach_type (compat mode) .. [FAIL]
Test case: sock_create load w/ expected_attach_type .. [FAIL]
Test case: attach type mismatch bind4 vs bind6 .. [FAIL]
...
Summary: 4 PASSED, 12 FAILED
$ ./test_sock_addr.sh
Wait for testing IPv4/IPv6 to become available .....
ERROR: Timeout waiting for test IP to become available.
In test_sock, bpf program loads failed due to hitting memlock limits.
In test_sock_addr.sh, my test machine is a ipv6 only test box and using
"ping" without specifying address family for an ipv6 address does not work.
This patch fixed the issue by including header bpf_rlimit.h in test_sock.c
and test_sock_addr.c, and specifying address family for ping command.
Cc: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Since e145242ea0df ("syscalls/core, syscalls/x86: Clean up syscall stub
naming convention") changed the main syscall function for 'epoll_pwait'
to something other than the expected 'SyS_epoll_pwait the' 'perf test
BPF' entries started failing, fix it by using something called from the
main syscall function instead, 'epoll_wait', which should keep this test
working in older kernels too.
Before:
# perf test BPF
40: BPF filter :
40.1: Basic BPF filtering : FAILED!
40.2: BPF pinning : Skip
40.3: BPF prologue generation : Skip
40.4: BPF relocation checker : Skip
If we use -v for that test we see the problem:
Probe point 'SyS_epoll_pwait' not found.
After:
# perf test BPF
40: BPF filter :
40.1: Basic BPF filtering : Ok
40.2: BPF pinning : Ok
40.3: BPF prologue generation : Ok
40.4: BPF relocation checker : Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/r/tip-y24nmn70cs2am8jh4i344dng@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In the 'perf test "mmap interface"' we try creating events for several
tracepoints, but when perf_evsel__new() fails we're not showing which
one is failing, fix that to help diagnosing problems, such as the
syscall tracepoints ones being found and fixes in this merge window.
Now the failing tests shows:
# perf test -v "mmap interface"
4: Read samples using the mmap interface :
--- start ---
test child forked, pid 14311
<SNIP>
perf_evsel__new(sys_enter_getppid)
test child finished with -1
---- end ----
Read samples using the mmap interface: FAILED!
#
Now to check why the syscalls:sys_enter_getppid is failing...
# ls -la /sys/kernel/debug/tracing/events/syscalls/sys_enter_getppid
ls: cannot access '/sys/kernel/debug/tracing/events/syscalls/sys_enter_getppid': No such file or directory
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-44xk0ycdzrfzx1o9rklf5itl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Few error messages does not have '\n' at the end and thus next prompt
gets printed in the same line. Ex,
linux~$ perf buildid-cache -verbose --add ./a.out
Error: did you mean `--verbose` (with two dashes ?)linux~$
Fix it.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Sihyeon Jang <uneedsihyeon@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180417041346.5617-2-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
'perf record' suggests to enable the APIC on errors.
APIC is practically always used today and the problem is usually
somewhere else.
Just remove the outdated suggestion.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20180406203812.3087-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When perf record encounters an error setting up an event it suggests
to enable CONFIG_PERF_EVENTS. This is misleading because:
- Usually it is enabled (it is really hard to disable on x86)
- The problem is usually somewhere else, e.g. the CPU is not supported
or an invalid configuration has been used.
Remove the misleading suggestion.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20180406203812.3087-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Clarify in the browser help that ESC in tui mode may go back to the
previous screen instead of just exiting (was not clear to me)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20180406203812.3087-3-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For perf mem report / perf mem record, pass all unknown options
through to the underlying report/record commands. This makes things
like
perf mem record -a sleep 1
work. Matches how c2c and other tools work.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20180406203812.3087-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Introduced in a4ff8e8620d3 ("mm: introduce MAP_FIXED_NOREPLACE"), and
now that we have that define in the just syncronized
tools/arch/*/include/uapi/asm/mman.h files, add support for it.
This should really transition to autogeneration of string tables as
done for various other things:
$ ls /tmp/build/perf/trace/beauty/generated/*.c
arch_errno_name_array.c kcmp_type_array.c madvise_behavior_array.c
pkey_alloc_access_rights_array.c prctl_option_array.c
$ head /tmp/build/perf/trace/beauty/generated/madvise_behavior_array.c
static const char *madvise_advices[] = {
[0] = "NORMAL",
[1] = "RANDOM",
[2] = "SEQUENTIAL",
[3] = "WILLNEED",
[4] = "DONTNEED",
[8] = "FREE",
[9] = "REMOVE",
[10] = "DONTFORK",
[11] = "DOFORK",
$
Till then, add support for this the old way.
Also it has to be ifdef'ed, because arches like mips still don't define
it. The proper solution will be to have per-arch tables for these
values to support cross-analysis.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-td9t5vhjltqnlzaurkkgq8cn@git.kernel.org
Signef-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In commit ce290a19609d ("selftests: add devpts selftests"), the
filesystems directory was added to the top-level selftests Makefile.
That had the effect of causing the existing dnotify_test in the
filesystems directory to now be run as part of the default selftests
test-run. Unfortunately dnotify_test is actually an infinite loop.
Fix it by moving dnotify_test to TEST_GEN_PROGS_EXTENDED, which says
that it's a generated file (ie. built) but should not be run as part
of the default test suite run (it's an "extended" test).
While we're here cleanup a few other things, devpts_pts should be in
TEST_GEN_PROGS to indicate that it's built, and with the above two
changes we no longer need a custom all or clean rule.
Fixes: ce290a19609d ("selftests: add devpts selftests")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Christian brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
|
'perf list' with flags -d and -v print a description (-d) or a very
verbose explanation (-v) of CPU specific counter events. These
descriptions are provided with the json files in directory
pmu-events/arch/s390/*.json.
Display of these descriptions on s390 requires the corresponding json
files.
On s390 this does not work because function is_pmu_core() does not
detect the s390 directory name where the CPU specific events are listed.
On x86 it is:
/sys/bus/event_source/devices/cpu
whereas on s390 it is:
/sys/bus/event_source/devices/cpum_cf
/sys/bus/event_source/devices/cpum_sf
Fix this by adding s390 directory name testing to function
is_pmu_core(). This is the same approach as taken for the ARM platform.
Output before:
[root@s35lp76 perf]# ./perf list -d pmu
List of pre-defined events (to be used in -e):
cpum_cf/AES_BLOCKED_CYCLES/ [Kernel PMU event]
cpum_cf/AES_BLOCKED_FUNCTIONS/ [Kernel PMU event]
cpum_cf/AES_CYCLES/ [Kernel PMU event]
cpum_cf/AES_FUNCTIONS/ [Kernel PMU event]
....
cpum_cf/TX_NC_TEND/ [Kernel PMU event]
cpum_cf/VX_BCD_EXECUTION_SLOTS/ [Kernel PMU event]
cpum_sf/SF_CYCLES_BASIC/ [Kernel PMU event]
Output after:
[root@s35lp76 perf]# ./perf list -d pmu
List of pre-defined events (to be used in -e):
cpum_cf/AES_BLOCKED_CYCLES/ [Kernel PMU event]
cpum_cf/AES_BLOCKED_FUNCTIONS/ [Kernel PMU event]
cpum_cf/AES_CYCLES/ [Kernel PMU event]
cpum_cf/AES_FUNCTIONS/ [Kernel PMU event]
....
cpum_cf/TX_NC_TEND/ [Kernel PMU event]
cpum_cf/VX_BCD_EXECUTION_SLOTS/ [Kernel PMU event]
cpum_sf/SF_CYCLES_BASIC/ [Kernel PMU event]
3906:
bcd_dfp_execution_slots
[BCD DFP Execution Slots]
decimal_instructions
[Decimal Instructions]
dtlb2_gpage_writes
[DTLB2 GPAGE Writes]
dtlb2_hpage_writes
[DTLB2 HPAGE Writes]
dtlb2_misses
[DTLB2 Misses]
dtlb2_writes
[DTLB2 Writes]
itlb2_misses
[ITLB2 Misses]
itlb2_writes
[ITLB2 Writes]
l1c_tlb2_misses
[L1C TLB2 Misses]
.....
cfvn 3:
cpu_cycles
[CPU Cycles]
instructions
[Instructions]
l1d_dir_writes
[L1D Directory Writes]
l1d_penalty_cycles
[L1D Penalty Cycles]
l1i_dir_writes
[L1I Directory Writes]
l1i_penalty_cycles
[L1I Penalty Cycles]
problem_state_cpu_cycles
[Problem State CPU Cycles]
problem_state_instructions
[Problem State Instructions]
....
csvn generic:
aes_blocked_cycles
[AES Blocked Cycles]
aes_blocked_functions
[AES Blocked Functions]
aes_cycles
[AES Cycles]
aes_functions
[AES Functions]
dea_blocked_cycles
[DEA Blocked Cycles]
dea_blocked_functions
[DEA Blocked Functions]
....
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180416132314.33249-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Append 'p' sign to 'S' tag designating the type of context switch out event so
'Sp' means preemption context switch. Documentation is extended to cover
new presentation changes.
$ perf script --show-switch-events -F +misc -I -i perf.data:
hdparm 4073 [004] U 762.198265: 380194 cycles:ppp: 7faf727f5a23 strchr (/usr/lib64/ld-2.26.so)
hdparm 4073 [004] K 762.198366: 441572 cycles:ppp: ffffffffb9218435 alloc_set_pte (/lib/modules/4.16.0-rc6+/build/vmlinux)
hdparm 4073 [004] S 762.198391: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0
swapper 0 [004] 762.198392: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 4073/4073
swapper 0 [004] Sp 762.198477: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 4073/4073
hdparm 4073 [004] 762.198478: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0
swapper 0 [007] K 762.198514: 2303073 cycles:ppp: ffffffffb98b0c66 intel_idle (/lib/modules/4.16.0-rc6+/build/vmlinux)
swapper 0 [007] Sp 762.198561: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 1134/1134
kworker/u16:18 1134 [007] 762.198562: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0
kworker/u16:18 1134 [007] S 762.198567: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/5fc65ce7-8ca5-53ae-8858-8ddd27290575@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Print additional 'preempt' tag for PERF_RECORD_SWITCH[_CPU_WIDE] OUT records when
event header misc field contains PERF_RECORD_MISC_SWITCH_OUT_PREEMPT bit set
designating preemption context switch out event:
tools/perf/perf report -D -i perf.data | grep _SWITCH
0 768361415226 0x27f076 [0x28]: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 8/8
4 768362216813 0x28f45e [0x28]: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0
4 768362217824 0x28f486 [0x28]: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 4073/4073
0 768362414027 0x27f0ce [0x28]: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 8/8
0 768362414367 0x27f0f6 [0x28]: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/6f5aebb9-b96c-f304-f08f-8f046d38de4f@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Store preempting context switch out event into Perf trace as a part of
PERF_RECORD_SWITCH[_CPU_WIDE] record.
Percentage of preempting and non-preempting context switches help
understanding the nature of workloads (CPU or IO bound) that are running
on a machine;
The event is treated as preemption one when task->state value of the
thread being switched out is TASK_RUNNING. Event type encoding is
implemented using PERF_RECORD_MISC_SWITCH_OUT_PREEMPT bit;
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/9ff84e83-a0ca-dd82-a6d0-cb951689be74@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Sync the following tooling headers with the latest kernel version:
tools/arch/arm/include/uapi/asm/kvm.h
- New ABI: KVM_REG_ARM_*
tools/arch/x86/include/asm/required-features.h
- Removal of NEED_LA57 dependency
tools/arch/x86/include/uapi/asm/kvm.h
- New KVM ABI: KVM_SYNC_X86_*
tools/include/uapi/asm-generic/mman-common.h
- New ABI: MAP_FIXED_NOREPLACE flag
tools/include/uapi/linux/bpf.h
- New ABI: BPF_F_SEQ_NUMBER functions
tools/include/uapi/linux/if_link.h
- New ABI: IFLA tun and rmnet support
tools/include/uapi/linux/kvm.h
- New ABI: hyperv eventfd and CONN_ID_MASK support plus header cleanups
tools/include/uapi/sound/asound.h
- New ABI: SNDRV_PCM_FORMAT_FIRST PCM format specifier
tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
- The x86 system call table description changed due to the ptregs changes and the renames, in:
d5a00528b58c: syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()
5ac9efa3c50d: syscalls/core, syscalls/x86: Clean up compat syscall stub naming convention
ebeb8c82ffaf: syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32
Also fix the x86 syscall table warning:
-Warning: Kernel ABI header at 'tools/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
+Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
None of these changes impact existing tooling code, so we only have to copy the kernel version.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brian Robbins <brianrob@microsoft.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com> <dvyukov@google.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Takuya Yamamoto <tkydevel@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: William Cohen <wcohen@redhat.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lkml.kernel.org/r/20180416064024.ofjtrz5yuu3ykhvl@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It may be useful to compile host programs with different flags (e.g.
hardening). Ensure that objtool picks up the appropriate flags.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kbuild@vger.kernel.org
Link: http://lkml.kernel.org/r/05a360681176f1423cb2fde8faae3a0a0261afc5.1523560825.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"Bug fixes, plus a new test case and the associated infrastructure for
writing nested virtualization tests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: selftests: add vmx_tsc_adjust_test
kvm: x86: move MSR_IA32_TSC handling to x86.c
X86/KVM: Properly update 'tsc_offset' to represent the running guest
kvm: selftests: add -std=gnu99 cflags
x86: Add check for APIC access address for vmentry of L2 guests
KVM: X86: fix incorrect reference of trace_kvm_pi_irte_update
X86/KVM: Do not allow DISABLE_EXITS_MWAIT when LAPIC ARAT is not available
kvm: selftests: fix spelling mistake: "divisable" and "divisible"
X86/VMX: Disable VMX preemption timer if MWAIT is not intercepted
|
|
The test checks the behavior of setting MSR_IA32_TSC in a nested guest,
and the TSC_OFFSET VMCS field in general. It also introduces the testing
infrastructure for Intel nested virtualization.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Enable test cases for the kernel's fallback to label-less mode.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Sysfs userspace tooling generally expects the kernel to emit a newlines
when reading sysfs attributes.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The nfit_test.1 bus provides a pmem topology without blk-aperture
enabling, so it presents different failure modes for label space
handling. Allow custom DSM command error injection.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Given that libnvdimm driver stack takes specific actions on DIMM command
error codes like -EACCES, provide a facility to inject custom failures.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull tooling improvements and fixes from Arnaldo Carvalho de Melo:
perf annotate fixes and improvements:
- Allow showing offsets in more than just jump targets, use the new
'O' hotkey in the TUI, config ~/.perfconfig annotate.offset_level
for it and for --stdio2 (Arnaldo Carvalho de Melo)
- Use the resolved variable names from objdump disassembled lines to
make them more compact, just like was already done for some instructions,
like "mov", this eventually will be done more generally, but lets now add
some more to the existing mechanism (Arnaldo Carvalho de Melo)
perf record fixes:
- Change warning for missing topology sysfs entry to debug, as not all
architectures have those files, s390 being one of those (Thomas Richter)
perf sched fixes:
- Fix -g/--call-graph documentation (Takuya Yamamoto)
perf stat:
- Enable 1ms interval for printing event counters values in (Alexey Budankov)
perf test fixes:
- Run dwarf unwind on arm32 (Kim Phillips)
- Remove unused ptrace.h include from LLVM test, sidesteping older
clang's lack of support for some asm constructs (Arnaldo Carvalho de Melo)
perf version fixes:
- Do not print info about HAVE_LIBAUDIT_SUPPORT in 'perf version --build-options'
when HAVE_SYSCALL_TABLE_SUPPORT is true, as libaudit won't be used in that
case, print info about syscall_table support instead (Jin Yao)
Build system fixes:
- Use HAVE_..._SUPPORT used consistently (Jin Yao)
- Restore READ_ONCE() C++ compatibility in tools/include (Mark Rutland)
- Give hints about package names needed to build jvmti (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- pass HOSTLDFLAGS when compiling single .c host programs
- build genksyms lexer and parser files instead of using shipped
versions
- rename *-asn1.[ch] to *.asn1.[ch] for suffix consistency
- let the top .gitignore globally ignore artifacts generated by flex,
bison, and asn1_compiler
- let the top Makefile globally clean artifacts generated by flex,
bison, and asn1_compiler
- use safer .SECONDARY marker instead of .PRECIOUS to prevent
intermediate files from being removed
- support -fmacro-prefix-map option to make __FILE__ a relative path
- fix # escaping to prepare for the future GNU Make release
- clean up deb-pkg by using debian tools instead of handrolled
source/changes generation
- improve rpm-pkg portability by supporting kernel-install as a
fallback of new-kernel-pkg
- extend Kconfig listnewconfig target to provide more information
* tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: extend output of 'listnewconfig'
kbuild: rpm-pkg: use kernel-install as a fallback for new-kernel-pkg
Kbuild: fix # escaping in .cmd files for future Make
kbuild: deb-pkg: split generating packaging and build
kbuild: use -fmacro-prefix-map to make __FILE__ a relative path
kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers
kbuild: rename *-asn1.[ch] to *.asn1.[ch]
kbuild: clean up *-asn1.[ch] patterns from top-level Makefile
.gitignore: move *-asn1.[ch] patterns to the top-level .gitignore
kbuild: add %.dtb.S and %.dtb to 'targets' automatically
kbuild: add %.lex.c and %.tab.[ch] to 'targets' automatically
genksyms: generate lexer and parser during build instead of shipping
kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level Makefile
.gitignore: move *.lex.c *.tab.[ch] patterns to the top-level .gitignore
kbuild: use HOSTLDFLAGS for single .c executables
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more perf updates from Thomas Gleixner:
"A rather large set of perf updates:
Kernel:
- Fix various initialization issues
- Prevent creating [ku]probes for not CAP_SYS_ADMIN users
Tooling:
- Show only failing syscalls with 'perf trace --failure' (Arnaldo
Carvalho de Melo)
e.g: See what 'openat' syscalls are failing:
# perf trace --failure -e openat
762.323 ( 0.007 ms): VideoCapture/4566 openat(dfd: CWD, filename: /dev/video2) = -1 ENOENT No such file or directory
<SNIP N /dev/videoN open attempts... sigh, where is that improvised camera lid?!? >
790.228 ( 0.008 ms): VideoCapture/4566 openat(dfd: CWD, filename: /dev/video63) = -1 ENOENT No such file or directory
^C#
- Show information about the event (freq, nr_samples, total
period/nr_events) in the annotate --tui and --stdio2 'perf
annotate' output, similar to the first line in the 'perf report
--tui', but just for the samples for a the annotated symbol
(Arnaldo Carvalho de Melo)
- Introduce 'perf version --build-options' to show what features were
linked, aliased as well as a shorter 'perf -vv' (Jin Yao)
- Add a "dso_size" sort order (Kim Phillips)
- Remove redundant ')' in the tracepoint output in 'perf trace'
(Changbin Du)
- Synchronize x86's cpufeatures.h, no effect on toolss (Arnaldo
Carvalho de Melo)
- Show group details on the title line in the annotate browser and
'perf annotate --stdio2' output, so that the per-event columns can
have headers (Arnaldo Carvalho de Melo)
- Fixup vertical line separating metrics from instructions and
cleaning unused lines at the bottom, both in the annotate TUI
browser (Arnaldo Carvalho de Melo)
- Remove duplicated 'samples' in lost samples warning in
'perf report' (Arnaldo Carvalho de Melo)
- Synchronize i915_drm.h, silencing the perf build process,
automagically adding support for the new DRM_I915_QUERY ioctl
(Arnaldo Carvalho de Melo)
- Make auxtrace_queues__add_buffer() allocate struct buffer, from a
patchkit already applied (Adrian Hunter)
- Fix the --stdio2/TUI annotate output to include group details, be
it for a recorded '{a,b,f}' explicit event group or when forcing
group display using 'perf report --group' for a set of events not
recorded as a group (Arnaldo Carvalho de Melo)
- Fix display artifacts in the ui browser (base class for the
annotate and main report/top TUI browser) related to the extra
title lines work (Arnaldo Carvalho de Melo)
- perf auxtrace refactorings, leftovers from a previously partially
processed patchset (Adrian Hunter)
- Fix the builtin clang build (Sandipan Das, Arnaldo Carvalho de
Melo)
- Synchronize i915_drm.h, silencing a perf build warning and in the
process automagically adding support for a new ioctl command
(Arnaldo Carvalho de Melo)
- Fix a strncpy issue in uprobe tracing"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
perf/core: Need CAP_SYS_ADMIN to create k/uprobe with perf_event_open()
tracing/uprobe_event: Fix strncpy corner case
perf/core: Fix perf_uprobe_init()
perf/core: Fix perf_kprobe_init()
perf/core: Fix use-after-free in uprobe_perf_close()
perf tests clang: Fix function name for clang IR test
perf clang: Add support for recent clang versions
perf tools: Fix perf builds with clang support
perf tools: No need to include namespaces.h in util.h
perf hists browser: Remove leftover from row returned from refresh
perf hists browser: Show extra_title_lines in the 'D' debug hotkey
perf auxtrace: Make auxtrace_queues__add_buffer() do CPU filtering
tools headers uapi: Synchronize i915_drm.h
perf report: Remove duplicated 'samples' in lost samples warning
perf ui browser: Fixup cleaning unused lines at the bottom
perf annotate browser: Fixup vertical line separating metrics from instructions
perf annotate: Show group details on the title line
perf auxtrace: Make auxtrace_queues__add_buffer() allocate struct buffer
perf/x86/intel: Move regs->flags EXACT bit init
perf trace: Remove redundant ')'
...
|
|
Just like is done for 'mov' and others that can have as source or
targets variables resolved by objdump, to make them more compact:
- orb $0x4,0x224d71(%rip) # 226ca4 <_rtld_global+0xca4>
+ orb $0x4,_rtld_global+0xca4
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-efex7746id4w4wa03nqxvh3m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The default is 1 (jump_target):
# perf annotate --ignore-vmlinux --stdio2 _raw_spin_lock_irqsave
Samples: 3K of event 'cycles:ppp', 3000 Hz, Event count (approx.): 2766398574
_raw_spin_lock_irqsave() /proc/kcore
0.26 nop
4.61 push %rbx
19.33 pushfq
7.97 pop %rax
0.32 nop
0.06 mov %rax,%rbx
14.63 cli
0.06 nop
xor %eax,%eax
mov $0x1,%edx
49.94 lock cmpxchg %edx,(%rdi)
0.16 test %eax,%eax
↓ jne 2b
2.66 mov %rbx,%rax
pop %rbx
← retq
2b: mov %eax,%esi
→ callq *ffffffffb30eaed0
mov %rbx,%rax
pop %rbx
← retq
#
But one can ask for showing offsets for call instructions by setting
this:
# perf annotate --ignore-vmlinux --stdio2 _raw_spin_lock_irqsave
Samples: 3K of event 'cycles:ppp', 3000 Hz, Event count (approx.): 2766398574
_raw_spin_lock_irqsave() /proc/kcore
0.26 nop
4.61 push %rbx
19.33 pushfq
7.97 pop %rax
0.32 nop
0.06 mov %rax,%rbx
14.63 cli
0.06 nop
xor %eax,%eax
mov $0x1,%edx
49.94 lock cmpxchg %edx,(%rdi)
0.16 test %eax,%eax
↓ jne 2b
2.66 mov %rbx,%rax
pop %rbx
← retq
2b: mov %eax,%esi
2d: → callq *ffffffffb30eaed0
mov %rbx,%rax
pop %rbx
← retq
#
Or using a big value to ask for all offsets to be shown:
# cat ~/.perfconfig
[annotate]
offset_level = 100
hide_src_code = true
# perf annotate --ignore-vmlinux --stdio2 _raw_spin_lock_irqsave
Samples: 3K of event 'cycles:ppp', 3000 Hz, Event count (approx.): 2766398574
_raw_spin_lock_irqsave() /proc/kcore
0.26 0: nop
4.61 5: push %rbx
19.33 6: pushfq
7.97 7: pop %rax
0.32 8: nop
0.06 d: mov %rax,%rbx
14.63 10: cli
0.06 11: nop
17: xor %eax,%eax
19: mov $0x1,%edx
49.94 1e: lock cmpxchg %edx,(%rdi)
0.16 22: test %eax,%eax
24: ↓ jne 2b
2.66 26: mov %rbx,%rax
29: pop %rbx
2a: ← retq
2b: mov %eax,%esi
2d: → callq *ffffffffb30eaed0
32: mov %rbx,%rax
35: pop %rbx
36: ← retq
#
This also affects the TUI, i.e. the default 'perf annotate' and 'perf
top/report' -> A hotkey -> annotate interfaces, when slang-devel is present
in the build, i.e.:
# perf version --build-options | grep slang
libslang: [ on ] # HAVE_SLANG_SUPPORT
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-venm6x5zrt40eu8hxdsmqxz6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In the TUI the 's' hotkey can be used to switch to another perf.data
file in the current directory, but that got broken in Fixes:
b01141f4f59c ("perf annotate: Initialize the priv are in symbol__new()"),
that would show this once another file was chosen:
┌─Fatal Error─────────────────────────────────────┐
│Annotation needs to be init before symbol__init()│
│ │
│ │
│Press any key... │
└─────────────────────────────────────────────────┘
Fix it by just silently bailing out if symbol__annotation_init() was already
called, just like is done with symbol__init(), i.e. they are done just once at
session start, not when switching to a new perf.data file.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: b01141f4f59c ("perf annotate: Initialize the priv are in symbol__new()")
Link: https://lkml.kernel.org/n/tip-ogppdtpzfax7y1h6gjdv5s6u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Using perf on 4.16.0 kernel on s390 shows this warning:
failed: can't open node sysfs data
each time I run command perf record ... for example:
[root@s35lp76 perf]# ./perf record -e rB0000 -- sleep 1
[ perf record: Woken up 1 times to write data ]
failed: can't open node sysfs data
[ perf record: Captured and wrote 0.001 MB perf.data (4 samples) ]
[root@s35lp76 perf]#
It turns out commit e2091cedd51bf ("perf tools: Add MEM_TOPOLOGY feature
to perf data file") tries to open directory named /sys/devices/system/node/
which does not exist on s390.
This is the call stack:
__cmd_record
+---> perf_session__write_header
+---> perf_header__adds_write
+---> do_write_feat
+---> write_mem_topology
+---> build_mem_topology
prints warning
The issue starts in do_write_feat() which unconditionally loops over all
features and now includes HEADER_MEM_TOPOLOGY and calls write_mem_topology().
Function record__init_features() at the beginning of __cmd_record() sets
all features and then turns off some of them.
Fix this by changing the warning to a level 2 debug output statement.
So it is only shown when debug level 2 or higher is set.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180412133246.92801-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add copyright in two files before they get autorubberstamped.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
