| Age | Commit message (Collapse) | Author |
|---|
|
Extend libbpf's pre-load checks for BPF programs, detecting more typical
conditions that are destinated to cause BPF program failure. This is an
opportunity to provide more helpful and actionable error message to
users, instead of potentially very confusing BPF verifier log and/or
error.
In this case, we detect struct_ops BPF program that was not referenced
anywhere, but still attempted to be loaded (according to libbpf logic).
Suggest that the program might need to be used in some struct_ops
variable. User will get a message of the following kind:
libbpf: prog 'test_1_forgotten': SEC("struct_ops") program isn't referenced anywhere, did you forget to use it?
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240507001335.1445325-6-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
strerror_r(), used from libbpf-specific libbpf_strerror_r() wrapper is
documented to return error in two different ways, depending on glibc
version. Take that into account when handling strerror_r()'s own errors,
which happens when we pass some non-standard (internal) kernel error to
it. Before this patch we'd have "ERROR: strerror_r(524)=22", which is
quite confusing. Now for the same situation we'll see a bit less
visually scary "unknown error (-524)".
At least we won't confuse user with irrelevant EINVAL (22).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240507001335.1445325-5-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add a test which tests the case that was just fixed. Kernel has full
type information about callback, but user explicitly nulls out the
reference to declaratively set BPF program reference.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240507001335.1445325-4-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
There is yet another corner case where user can set STRUCT_OPS program
reference in STRUCT_OPS map to NULL, but libbpf will fail to disable
autoload for such BPF program. This time it's the case of "new" kernel
which has type information about callback field, but user explicitly
nulled-out program reference from user-space after opening BPF object.
Fix, hopefully, the last remaining unhandled case.
Fixes: 0737df6de946 ("libbpf: better fix for handling nulled-out struct_ops program")
Fixes: f973fccd43d3 ("libbpf: handle nulled-out program in struct_ops correctly")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240507001335.1445325-3-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
libbpf ensures that BPF program references set in map->st_ops->progs[i]
during open phase are always valid STRUCT_OPS programs. This is done in
bpf_object__collect_st_ops_relos(). So there is no need to double-check
that in bpf_map__init_kern_struct_ops().
Simplify the code by removing unnecessary check. Also, we avoid using
local prog variable to keep code similar to the upcoming fix, which adds
similar logic in another part of bpf_map__init_kern_struct_ops().
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240507001335.1445325-2-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
The test_xdp_noinline.c contains 2 functions that use more then 5
arguments. This patch collapses the 2 last arguments in an array.
Also in GCC and ipa_sra optimization increases the number of arguments
used in function encap_v4. This pass disables the optimization for that
particular file.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240507122220.207820-3-cupertino.miranda@oracle.com
|
|
This patch adds support to specify CFLAGS per source file and per test
runner.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240507122220.207820-2-cupertino.miranda@oracle.com
|
|
The vmlinux.h file generated by bpftool makes use of compiler pragmas
in order to install the CO-RE preserve_access_index in all the struct
types derived from the BTF info:
#ifndef __VMLINUX_H__
#define __VMLINUX_H__
#ifndef BPF_NO_PRESERVE_ACCESS_INDEX
#pragma clang attribute push (__attribute__((preserve_access_index)), apply_t = record
#endif
[... type definitions generated from kernel BTF ... ]
#ifndef BPF_NO_PRESERVE_ACCESS_INDEX
#pragma clang attribute pop
#endif
The `clang attribute push/pop' pragmas are specific to clang/llvm and
are not supported by GCC.
At the moment the BTF dumping services in libbpf do not support
dicriminating between types dumped because they are directly referred
and types dumped because they are dependencies. A suitable API is
being worked now. See [1] and [2].
In the interim, this patch changes the selftests/bpf Makefile so it
passes -DBPF_NO_PRESERVE_ACCESS_INDEX to GCC when it builds the
selftests. This workaround is temporary, and may have an impact on
the results of the GCC-built tests.
[1] https://lore.kernel.org/bpf/20240503111836.25275-1-jose.marchesi@oracle.com/T/#u
[2] https://lore.kernel.org/bpf/20240504205510.24785-1-jose.marchesi@oracle.com/T/#u
Tested in bpf-next master.
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240507095011.15867-1-jose.marchesi@oracle.com
|
|
This patch modifies selftests/bpf/Makefile to pass -Wno-attributes to
GCC. This is because of the following attributes which are ignored:
- btf_decl_tag
- btf_type_tag
There are many of these. At the moment none of these are
recognized/handled by gcc-bpf.
We are aware that btf_decl_tag is necessary for some of the
selftest harness to communicate test failure/success. Support for
it is in progress in GCC upstream:
https://gcc.gnu.org/pipermail/gcc-patches/2024-May/650482.html
However, the GCC master branch is not yet open, so the series
above (currently under review upstream) wont be able to make it
there until 14.1 gets released, probably mid next week.
As for btf_type_tag, more extensive work will be needed in GCC
upstream to support it in both BTF and DWARF. We have a WIP big
patch for that, but that is not needed to compile/build the
selftests.
- used
There are SEC macros defined in the selftests as:
#define SEC(N) __attribute__((section(N),used))
The SEC macro is used for both functions and global variables.
According to the GCC documentation `used' attribute is really only
meaningful for functions, and it warns when the attribute is used
for other global objects, like for example ctl_array in
test_xdp_noinline.c.
Ignoring this is benign.
- align_value
In progs/test_cls_redirect.c:127 there is:
typedef uint8_t *net_ptr __attribute__((align_value(8)));
GCC warns that it is ignoring this attribute, because it is not
implemented by GCC.
I think ignoring this attribute in GCC is benign, because according
to the clang documentation [1] its purpose seems to be merely
declarative and doesn't seem to translate into extra checks at
run-time, only to perhaps better optimized code ("runtime behavior
is undefined if the pointed memory object is not aligned to the
specified alignment").
[1] https://clang.llvm.org/docs/AttributeReference.html#align-value
Tested in bpf-next master.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240507074227.4523-3-jose.marchesi@oracle.com
|
|
An object defined as `static' defaults to hidden visibility. If
additionally the visibility(__weak__) compiler attribute is applied to
the declaration of the object, GCC warns that the attribute gets
ignored.
This patch removes the only instance of this problem among the BPF
selftests.
Tested in bpf-next master.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240507074227.4523-2-jose.marchesi@oracle.com
|
|
In our FOLL_LONGTERM tests, we prefault the page tables for the GUP-fast
test cases to be able to find a PTE and exercise the "longterm pinning
allowed" logic on the GUP-fast path where possible.
For now, we always prefault the page tables writable, resulting in PTEs
that are writable.
Let's cover more cases to also test if our unsharing logic works as
expected (and is able to make progress when there is nothing to unshare)
by mprotect'ing the range R/O when R/O-pinning, so we don't get PTEs that
are writable.
This change would have found an issue introduced by commit a12083d721d7
("mm/gup: handle hugepd for follow_page()"), whereby R/O pinning was not
able to make progress in all cases, because unsharing logic was not
provided with the VMA to decide at some point that long-term R/O pinning a
!anon page is fine.
Link: https://lkml.kernel.org/r/20240430131508.86924-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix spelling mistakes in the comments.
Link: https://lkml.kernel.org/r/20240501231317.24648-1-sauravshah.31@gmail.com
Signed-off-by: Saurav Shah <sauravshah.31@gmail.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests: mm: cow: flag vmsplice() hugetlb tests as XFAIL".
The failing hugetlb vmsplice() COW tests keep confusing people, and having
tests that have been failing for years and likely will keep failing for
years to come because nobody cares enough is rather suboptimal. Let's
mark them as XFAIL and document why fixing them is not that easy as it
would appear at first sight.
More details can be found in [1], especially around how hugetlb pages
cannot really be overcommitted, and why we don't particularly care about
these vmsplice() leaks for hugetlb -- in contrast to ordinary memory.
[1] https://lore.kernel.org/all/8b42a24d-caf0-46ef-9e15-0f88d47d2f21@redhat.com/
This patch (of 2):
The vmsplice() hugetlb tests have been failing right from the start, and
we documented that in the introducing commit 7dad331be781 ("selftests/vm:
anon_cow: hugetlb tests"):
Note that some tests cases still fail. This will, for example, be
fixed once vmsplice properly uses FOLL_PIN instead of FOLL_GET for
pinning. With 2 MiB and 1 GiB hugetlb on x86_64, the expected
failures are:
Until vmsplice() is changed, these tests will likely keep failing: hugetlb
COW reuse logic is harder to change, because using the same COW reuse
logic as we use for !hugetlb could harm other (sane) users when running
out of free hugetlb pages.
More details can be found in [1], especially around how hugetlb pages
cannot really be overcommitted, and why we don't particularly care about
these vmsplice() leaks for hugetlb -- in contrast to ordinary memory.
These (expected) failures keep confusing people, so flag them accordingly.
Before:
$ ./cow
[...]
Bail out! 8 out of 778 tests failed
# Totals: pass:769 fail:8 xfail:0 xpass:0 skip:1 error:0
$ echo $?
1
After:
$ ./cow
[...]
# Totals: pass:769 fail:0 xfail:8 xpass:0 skip:1 error:0
$ echo $?
0
[1] https://lore.kernel.org/all/8b42a24d-caf0-46ef-9e15-0f88d47d2f21@redhat.com/
Link: https://lkml.kernel.org/r/20240502085259.103784-1-david@redhat.com
Link: https://lkml.kernel.org/r/20240502085259.103784-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
KVM/riscv changes for 6.10
- Support guest breakpoints using ebreak
- Introduce per-VCPU mp_state_lock and reset_cntx_lock
- Virtualize SBI PMU snapshot and counter overflow interrupts
- New selftests for SBI PMU and Guest ebreak
|
|
The documentation mentions KVM_CAP_PPC_RADIX_MMU, but the defines in the
kvm headers spell it KVM_CAP_PPC_MMU_RADIX. Similarly with
KVM_CAP_PPC_MMU_HASH_V3.
Fixes: c92701322711 ("KVM: PPC: Book3S HV: Add userspace interfaces for POWER9 MMU")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230411061446.26324-1-joel@jms.id.au
|
|
udev-hid-bpf is still not installed everywhere, and we should probably
not assume it is installed automatically.
Link: https://lore.kernel.org/r/20240506143612.148031-1-bentiss@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The only interesting bit is the HAT switch, and we use a BPF program
to fix it. So ensure this works correctly.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-18-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
More in line with the other test_* files.
No code change
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-17-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
We need to slightly change base_device.py for supporting HID-BPF,
so instead of monkey patching, let's just embed it in the kernel tree.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-16-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
This tablets gets a lot of things wrong:
- the secondary button is reported through Secondary Tip Switch
- the third button is reported through Invert
We need to add some out of proximity intermediate state when moving
back and forth with the eraser mode as it can only be triggered by
physically returning the pen, meaning that the tolerated transitions
can never happen.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-15-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The values are taken from the HID-BPF file.
Basically we are recomputing the array provided there.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-14-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Those tablets don't need special initialization, but are reporting
the events with the wrong usages:
- tip switch is used when the eraser should be used
- eraser is used instead of the secondary barrel switch
Add tests for those so we don't regress in the future.
Currently we set x/y tilt to 0 to not trigger the bpf program
compensate_coordinates_by_tilt()
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-13-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
All the *_WITH*BUTTON states were almost identical except for the
button itself.
I need to add a new device with a third button, and adding a bunch of
states is going to be quite cumbersome.
So convert the `button` parameter of PenState as a boolean, and store
which button is the target as an argument to all functions that need it.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-12-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
few required changes:
- we need to count how many times a udev 'bind' event happens
- we need to tell `udev-hid-bpf` to not automatically attach the
provided HID-BPF objects
- we need to manually attach the ones from the kernel tree, and wait
for the second udev 'bind' event to happen
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-11-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
We need to slightly change base_device.py for supporting HID-BPF,
so instead of monkey patching, let's just embed it in the kernel tree.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-10-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers
RISC-V SoC Kconfig Updates for v6.10
A few different bits of SoC-related Kconfig work. The first part of
this is shared with the DT updates - the modification of all SOC_CANAAN
users to SOC_CANAAN_K210 to split the existing m-mode nommu k210 away
from the k230 that is able to be used in a "common" kernel.
The other thing here is the removal of most of the SOC_VENDOR options,
with their ARCH_VENDOR equivalents that've been waiting in the wings for
1 year+ now made visible. Due a lapse on my part when originally adding
the ARCH_VENDOR stuff, the Microchip transition isn't complete - the
_POLARFIRE was a mistake to keep as there's gonna be non-PolarFire
RISC-V stuff from Microchip soonTM.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-config-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: config: enable ARCH_CANAAN in defconfig
RISC-V: drop SOC_VIRT for ARCH_VIRT
RISC-V: drop SOC_SIFIVE for ARCH_SIFIVE
RISC-V: drop SOC_MICROCHIP_POLARFIRE for ARCH_MICROCHIP
RISC-V: Drop unused SOC_CANAAN
reset: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
pinctrl: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
clk: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
soc: canaan: Deprecate SOC_CANAAN and use SOC_CANAAN_K210 for K210
riscv: Kconfig.socs: Split ARCH_CANAAN and SOC_CANAAN_K210
Link: https://lore.kernel.org/r/20240503-mardi-underling-3d81a9f97329@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Added a test for bound computation in MUL when non constant
values are used and both registers have bounded ranges.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: David Faust <david.faust@oracle.com>
Cc: Jose Marchesi <jose.marchesi@oracle.com>
Cc: Elena Zannoni <elena.zannoni@oracle.com>
Link: https://lore.kernel.org/r/20240506141849.185293-7-cupertino.miranda@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Added a test for bound computation in XOR and OR when non constant
values are used and both registers have bounded ranges.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: David Faust <david.faust@oracle.com>
Cc: Jose Marchesi <jose.marchesi@oracle.com>
Cc: Elena Zannoni <elena.zannoni@oracle.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Link: https://lore.kernel.org/r/20240506141849.185293-5-cupertino.miranda@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When building either tools/bpf/bpftool, or tools/testing/selftests/hid,
(the same Makefile is used for these), clang generates many instances of
the following:
"clang: warning: -lLLVM-17: 'linker' input unused"
Quentin points out that the LLVM version is only required in $(LIBS),
not in $(CFLAGS), so the fix is to remove it from CFLAGS.
Suggested-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20240505230054.13813-1-jhubbard@nvidia.com
|
|
Cast operation has a higher precedence than addition. The code here
wants to zero the 2nd half of the 64-bit metadata, but due to a pointer
arithmetic mistake, it writes the zero at offset 16 instead.
Just adding parentheses around "data + 4" would fix this, but I think
this will be slightly better readable with array syntax.
I was unable to test this with tools/testing/selftests/bpf/vmtest.sh,
because my glibc is newer than glibc in the provided VM image.
So I just checked the difference in the compiled code.
objdump -S tools/testing/selftests/bpf/xdp_do_redirect.test.o:
- *((__u32 *)data) = 0x42; /* metadata test value */
+ ((__u32 *)data)[0] = 0x42; /* metadata test value */
be7: 48 8d 85 30 fc ff ff lea -0x3d0(%rbp),%rax
bee: c7 00 42 00 00 00 movl $0x42,(%rax)
- *((__u32 *)data + 4) = 0;
+ ((__u32 *)data)[1] = 0;
bf4: 48 8d 85 30 fc ff ff lea -0x3d0(%rbp),%rax
- bfb: 48 83 c0 10 add $0x10,%rax
+ bfb: 48 83 c0 04 add $0x4,%rax
bff: c7 00 00 00 00 00 movl $0x0,(%rax)
Fixes: 5640b6d89434 ("selftests/bpf: fix "metadata marker" getting overwritten by the netstack")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20240506145023.214248-1-mschmidt@redhat.com
|
|
The bpf programs that this patch changes require the BPF_PROG macro.
The BPF_PROG macro is defined in the libbpf's bpf_tracing.h.
Some tests include bpf_tcp_helpers.h which includes bpf_tracing.h.
They don't need other things from bpf_tcp_helpers.h other than
bpf_tracing.h. This patch simplifies it by directly including
the bpf_tracing.h.
The motivation of this unnecessary code churn is to retire
the bpf_tcp_helpers.h by directly using vmlinux.h. Right now,
the main usage of the bpf_tcp_helpers.h is the partial kernel
socket definitions (e.g. socket, sock, tcp_sock). While the test
cases continue to grow, fields are kept adding to those partial
socket definitions (e.g. the recent bpf_cc_cubic.c test which
tried to extend bpf_tcp_helpers.c but eventually used the
vmlinux.h instead).
The idea is to retire bpf_tcp_helpers.c and consistently use
vmlinux.h for the tests that require the kernel sockets. This
patch tackles the obvious tests that can directly use bpf_tracing.h
instead of bpf_tcp_helpers.h.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240504005045.848376-1-martin.lau@linux.dev
|
|
Align the behavior for gcc and clang builds by interpreting unset
`ARCH` and `CROSS_COMPILE` variables in `LLVM` builds as a sign that the
user wants to build for the host architecture.
This patch preserves the properties that setting the `ARCH` variable to an
unknown value will trigger an error that complains about insufficient
information, and that a set `CROSS_COMPILE` variable will override the
target triple that is determined based on presence/absence of `ARCH`.
When compiling with clang, i.e., `LLVM` is set, an unset `ARCH` variable in
combination with an unset `CROSS_COMPILE` variable, i.e., compiling for
the host architecture, leads to compilation failures since `lib.mk` can
not determine the clang target triple. In this case, the following error
message is displayed for each subsystem that does not set `ARCH` in its
own Makefile before including `lib.mk` (lines wrapped at 75 chrs):
make[1]: Entering directory '/mnt/build/linux/tools/testing/selftests/
sysctl'
../lib.mk:33: *** Specify CROSS_COMPILE or add '--target=' option to
lib.mk. Stop.
make[1]: Leaving directory '/mnt/build/linux/tools/testing/selftests/
sysctl'
In the same scenario a gcc build would default to the host architecture,
i.e., it would use plain `gcc`.
Fixes: 795285ef2425 ("selftests: Fix clang cross compilation")
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Valentin Obst <kernel@valentinobst.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
First of all, in order to build with clang at all, one must first apply
Valentin Obst's build fix for LLVM [1]. Once that is done, then when
building with clang, via:
make LLVM=1 -C tools/testing/selftests
...the following error occurs:
clang: error: cannot specify -o when generating multiple output files
This is because clang, unlike gcc, won't accept invocations of this
form:
clang file1.c header2.h
Fix this by using selftests/lib.mk facilities for tracking local header
file dependencies: add them to LOCAL_HDRS, leaving only the .c files to
be passed to the compiler.
[1] https://lore.kernel.org/all/20240329-selftests-libmk-llvm-rfc-v1-1-2f9ed7d1c49f@valentinobst.de/
Fixes: 8e289f454289 ("selftests/resctrl: Add resctrl.h into build deps")
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
First of all, in order to build with clang at all, one must first apply
Valentin Obst's build fix for LLVM [1]. Once that is done, then when
building with clang, via:
make LLVM=1 -C tools/testing/selftests
...the following error occurs:
clang: error: cannot specify -o when generating multiple output files
This is because clang, unlike gcc, won't accept invocations of this
form:
clang file1.c header2.h
While trying to fix this, I noticed that:
a) selftests/lib.mk already avoids the problem, and
b) The binderfs Makefile indavertently bypasses the selftests/lib.mk
build system, and quitely uses Make's implicit build rules for .c files
instead.
The Makefile attempts to set up both a dependency and a source file,
neither of which was needed, because lib.mk is able to automatically
handle both. This line:
binderfs_test: binderfs_test.c
...causes Make's implicit rules to run, which builds binderfs_test
without ever looking at lib.mk.
Fix this by simply deleting the "binderfs_test:" Makefile target and
letting lib.mk handle it instead.
[1] https://lore.kernel.org/all/20240329-selftests-libmk-llvm-rfc-v1-1-2f9ed7d1c49f@valentinobst.de/
Fixes: 6e29225af902 ("binderfs: port tests to test harness infrastructure")
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn") marked functions that call
exit() as __noreturn but it did not change the return type of these
functions from 'void' to 'int' like it should have (since a noreturn
function by definition cannot return an integer because it does not
return...) because there were many tests that return the result of the
ksft_exit functions, even though it has never been used due to calling
exit().
Now that all uses of 'return ksft_exit...()' have been cleaned up
properly, change the types of the ksft_exit...() functions to void to
match their __noreturn nature.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the call to ksft_exit_pass(), as __noreturn prevents the
compiler from warning that a caller of ksft_exit_pass() does not return
a value because the program will terminate upon calling these functions.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_...(), as __noreturn prevents the
compiler from warning that a caller of the ksft_exit functions does not
return a value because the program will terminate upon calling these
functions.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the call to ksft_exit_pass(), as __noreturn prevents the
compiler from warning that a caller of ksft_exit_pass() does not return
a value because the program will terminate upon calling these functions
(which is what the comment alluded to as well).
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_skip(), as __noreturn prevents
the compiler from warning that a caller of ksft_exit_skip() does not
return a value because the program will terminate upon calling these
functions.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_{pass,fail}(), as __noreturn
prevents the compiler from warning that a caller of the ksft_exit
functions does not return a value because the program will terminate
upon calling these functions.
Just removing 'return' would have resulted in
!ret ? ksft_exit_pass() : ksft_exit_fail();
so convert that into the more idiomatic
if (ret)
ksft_exit_fail();
ksft_exit_pass();
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_...(), as __noreturn prevents the
compiler from warning that a caller of the ksft_exit functions does not
return a value because the program will terminate upon calling these
functions.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_pass(), as __noreturn prevents
the compiler from warning that a caller of ksft_exit_pass() does not
return a value because the program will terminate upon calling these
functions.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_...(), as __noreturn prevents the
compiler from warning that a caller of the ksft_exit functions does not
return a value because the program will terminate upon calling these
functions.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_{pass,fail}(), as __noreturn
prevents the compiler from warning that a caller of the ksft_exit
functions does not return a value because the program will terminate
upon calling these functions.
Just removing 'return' would have resulted in
!ret ? ksft_exit_pass() : ksft_exit_fail();
so convert that into the more idiomatic
if (ret)
ksft_exit_fail();
ksft_exit_pass();
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
There is one use of bash specific syntax in the script. Change it to the
equivalent POSIX syntax. This doesn't change functionality and allows
the test to be run on shells other than bash.
Reported-by: Mike Looijmans <mike.looijmans@topic.nl>
Closes: https://lore.kernel.org/all/efae4037-c22a-40be-8ba9-7c1c12ece042@topic.nl/
Fixes: 4a679c5afca0 ("selftests: Add test to verify power supply properties")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
There are a couple uses of bash specific syntax in the script. Change
them to the equivalent POSIX syntax. This doesn't change functionality
and allows non-bash test scripts to make use of these helpers.
Reported-by: Mike Looijmans <mike.looijmans@topic.nl>
Closes: https://lore.kernel.org/all/efae4037-c22a-40be-8ba9-7c1c12ece042@topic.nl/
Fixes: 2dd0b5a8fcc4 ("selftests: ktap_helpers: Add a helper to finish the test")
Fixes: 14571ab1ad21 ("kselftest: Add new test for detecting unprobed Devicetree devices")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This test outputs lots of information. Let's conform the core part of
the test to TAP and leave the information printing messages for now.
Include ktap_helpers.sh to print conformed logs. Use KSFT_* macros to
return the correct exit code for the kselftest framework and CIs to
understand the exit status.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Let the compilers (clang) know that this function would just call
exit() and would never return. It is needed to avoid false positive
static analysis errors. All similar functions calling exit()
unconditionally have been marked as __noreturn.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When logging an error from calling waitpid() on the child we print a
misleading error message saying that the error we report was returned by
the chilld. Fix this to say the error is from waitpid().
Applied after fixing merge conflict:
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When the child exits during the clone3() selftest we use WEXITSTATUS() to
get the exit status from the process without first checking WIFEXITED() to
see if the result will be valid. This can lead to incorrect results, for
example if the child exits due to signal. Add a WIFEXTED() check and report
any non-standard exit as a failure, using EXIT_FAILURE as the exit status
for call_clone3() since we otherwise report 0 or negative errnos.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
