summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2016-12-17bpf, test_verifier: fix a test case error result on unprivilegedDaniel Borkmann
Running ./test_verifier as unprivileged lets 1 out of 98 tests fail: [...] #71 unpriv: check that printk is disallowed FAIL Unexpected error message! 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r1 = r10 2: (07) r1 += -8 3: (b7) r2 = 8 4: (bf) r3 = r1 5: (85) call bpf_trace_printk#6 unknown func bpf_trace_printk#6 [...] The test case is correct, just that the error outcome changed with ebb676daa1a3 ("bpf: Print function name in addition to function id"). Same as with e00c7b216f34 ("bpf: fix multiple issues in selftest suite and samples") issue 2), so just fix up the function name. Fixes: ebb676daa1a3 ("bpf: Print function name in addition to function id") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-17bpf: fix regression on verifier pruning wrt map lookupsDaniel Borkmann
Commit 57a09bf0a416 ("bpf: Detect identical PTR_TO_MAP_VALUE_OR_NULL registers") introduced a regression where existing programs stopped loading due to reaching the verifier's maximum complexity limit, whereas prior to this commit they were loading just fine; the affected program has roughly 2k instructions. What was found is that state pruning couldn't be performed effectively anymore due to mismatches of the verifier's register state, in particular in the id tracking. It doesn't mean that 57a09bf0a416 is incorrect per se, but rather that verifier needs to perform a lot more work for the same program with regards to involved map lookups. Since commit 57a09bf0a416 is only about tracking registers with type PTR_TO_MAP_VALUE_OR_NULL, the id is only needed to follow registers until they are promoted through pattern matching with a NULL check to either PTR_TO_MAP_VALUE or UNKNOWN_VALUE type. After that point, the id becomes irrelevant for the transitioned types. For UNKNOWN_VALUE, id is already reset to 0 via mark_reg_unknown_value(), but not so for PTR_TO_MAP_VALUE where id is becoming stale. It's even transferred further into other types that don't make use of it. Among others, one example is where UNKNOWN_VALUE is set on function call return with RET_INTEGER return type. states_equal() will then fall through the memcmp() on register state; note that the second memcmp() uses offsetofend(), so the id is part of that since d2a4dd37f6b4 ("bpf: fix state equivalence"). But the bisect pointed already to 57a09bf0a416, where we really reach beyond complexity limit. What I found was that states_equal() often failed in this case due to id mismatches in spilled regs with registers in type PTR_TO_MAP_VALUE. Unlike non-spilled regs, spilled regs just perform a memcmp() on their reg state and don't have any other optimizations in place, therefore also id was relevant in this case for making a pruning decision. We can safely reset id to 0 as well when converting to PTR_TO_MAP_VALUE. For the affected program, it resulted in a ~17 fold reduction of complexity and let the program load fine again. Selftest suite also runs fine. The only other place where env->id_gen is used currently is through direct packet access, but for these cases id is long living, thus a different scenario. Also, the current logic in mark_map_regs() is not fully correct when marking NULL branch with UNKNOWN_VALUE. We need to cache the destination reg's id in any case. Otherwise, once we marked that reg as UNKNOWN_VALUE, it's id is reset and any subsequent registers that hold the original id and are of type PTR_TO_MAP_VALUE_OR_NULL won't be marked UNKNOWN_VALUE anymore, since mark_map_reg() reuses the uncached regs[regno].id that was just overridden. Note, we don't need to cache it outside of mark_map_regs(), since it's called once on this_branch and the other time on other_branch, which are both two independent verifier states. A test case for this is added here, too. Fixes: 57a09bf0a416 ("bpf: Detect identical PTR_TO_MAP_VALUE_OR_NULL registers") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2016-12-09Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "Several fixes to the DSM (ACPI device specific method) marshaling implementation. I consider these urgent enough to send for 4.9 consideration since they fix the kernel's handling of ARS (Address Range Scrub) commands. Especially for platforms without machine-check-recovery capabilities, successful execution of ARS commands enables the platform to potentially break out of an infinite reboot problem if a media error is present in the boot path. There is also a one line fix for a device-dax read-only mapping regression. Commits 9a901f5495e2 ("acpi, nfit: fix extended status translations for ACPI DSMs") and 325896ffdf90 ("device-dax: fix private mapping restriction, permit read-only") are true regression fixes for changes introduced this cycle. Commit efda1b5d87cb ("acpi, nfit, libnvdimm: fix / harden ars_status output length handling") fixes the kernel's handling of zero-length results, this never would have worked in the past, but we only just recently discovered a BIOS implementation that emits this arguably spec non-compliant result. The remaining two commits are additional fall out from thinking through the implications of a zero / truncated length result of the ARS Status command. In order to mitigate the risk that these changes introduce yet more regressions they are backstopped by a new unit test in commit a7de92dac9f0 ("tools/testing/nvdimm: unit test acpi_nfit_ctl()") that mocks up inputs to acpi_nfit_ctl()" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: fix private mapping restriction, permit read-only tools/testing/nvdimm: unit test acpi_nfit_ctl() acpi, nfit: fix bus vs dimm confusion in xlat_status acpi, nfit: validate ars_status output buffer size acpi, nfit, libnvdimm: fix / harden ars_status output length handling acpi, nfit: fix extended status translations for ACPI DSMs
2016-12-09Revert "radix tree test suite: fix compilation"Linus Torvalds
This reverts commit 53855d10f4567a0577360b6448d52a863929775b. It shouldn't have come in yet - it depends on the changes in linux-next that will come in during the next merge window. As Matthew Wilcox says, the test suite is broken with the current state without the revert. Requested-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-07radix tree test suite: fix compilationMatthew Wilcox
Patch "lib/radix-tree: Convert to hotplug state machine" breaks the test suite as it adds a call to cpuhp_setup_state_nocalls() which is not currently emulated in the test suite. Add it, and delete the emulation of the old CPU hotplug mechanism. Link: http://lkml.kernel.org/r/1480369871-5271-36-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-06tools/testing/nvdimm: unit test acpi_nfit_ctl()Dan Williams
A recent flurry of bug discoveries in the nfit driver's DSM marshalling routine has highlighted the fact that we do not have unit test coverage for this routine. Add a self-test of acpi_nfit_ctl() routine before probing the "nfit_test.0" device. This mocks stimulus to acpi_nfit_ctl() and if any of the tests fail "nfit_test.0" will be unavailable causing the rest of the tests to not run / fail. This unit test will also be a place to land reproductions of quirky BIOS behavior discovered in the field and ensure the kernel does not regress against implementations it has seen in practice. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-12-06bpf: add additional verifier tests for BPF_PROG_TYPE_LWT_*Thomas Graf
- direct packet read is allowed for LWT_* - direct packet write for LWT_IN/LWT_OUT is prohibited - direct packet write for LWT_XMIT is allowed - access to skb->tc_classid is prohibited for LWT_* Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06tools: hv: Enable network manager for bonding scripts on RHELHaiyang Zhang
We found network manager is necessary on RHEL to make the synthetic NIC, VF NIC bonding operations handled automatically. So, enabling network manager here. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06objtool: Fix bytes check of lea's rex_prefixJiri Slaby
For the "lea %(rsp), %rbp" case, we check if there is a rex_prefix. But we check 'bytes' which is insn_byte_t[4] in rex_prefix (insn_field structure). Therefore, the check is always true. Instead, check 'nbytes' which is the right one. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161205105551.25917-1-jslaby@suse.cz Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-05bpf: Preserve const register type on const OR alu opsGianluca Borello
Occasionally, clang (e.g. version 3.8.1) translates a sum between two constant operands using a BPF_OR instead of a BPF_ADD. The verifier is currently not handling this scenario, and the destination register type becomes UNKNOWN_VALUE even if it's still storing a constant. As a result, the destination register cannot be used as argument to a helper function expecting a ARG_CONST_STACK_*, limiting some use cases. Modify the verifier to handle this case, and add a few tests to make sure all combinations are supported, and stack boundaries are still verified even with BPF_OR. Signed-off-by: Gianluca Borello <g.borello@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30bpf: add test for the verifier equal logic bugJosef Bacik
This is a test to verify that bpf: fix states equal logic for varlen access actually fixed the problem. The problem was if the register we added to our map register was UNKNOWN in both the false and true branches and the only thing that changed was the range then we'd incorrectly assume that the true branch was valid, which it really wasnt. This tests this case and properly fails without my fix in place and passes with it in place. Signed-off-by: Josef Bacik <jbacik@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-27bpf: fix multiple issues in selftest suite and samplesDaniel Borkmann
1) The test_lru_map and test_lru_dist fails building on my machine since the sys/resource.h header is not included. 2) test_verifier fails in one test case where we try to call an invalid function, since the verifier log output changed wrt printing function names. 3) Current selftest suite code relies on sysconf(_SC_NPROCESSORS_CONF) for retrieving the number of possible CPUs. This is broken at least in our scenario and really just doesn't work. glibc tries a number of things for retrieving _SC_NPROCESSORS_CONF. First it tries equivalent of /sys/devices/system/cpu/cpu[0-9]* | wc -l, if that fails, depending on the config, it either tries to count CPUs in /proc/cpuinfo, or returns the _SC_NPROCESSORS_ONLN value instead. If /proc/cpuinfo has some issue, it returns just 1 worst case. This oddity is nothing new [1], but semantics/behaviour seems to be settled. _SC_NPROCESSORS_ONLN will parse /sys/devices/system/cpu/online, if that fails it looks into /proc/stat for cpuX entries, and if also that fails for some reason, /proc/cpuinfo is consulted (and returning 1 if unlikely all breaks down). While that might match num_possible_cpus() from the kernel in some cases, it's really not guaranteed with CPU hotplugging, and can result in a buffer overflow since the array in user space could have too few number of slots, and on perpcu map lookup, the kernel will write beyond that memory of the value buffer. William Tu reported such mismatches: [...] The fact that sysconf(_SC_NPROCESSORS_CONF) != num_possible_cpu() happens when CPU hotadd is enabled. For example, in Fusion when setting vcpu.hotadd = "TRUE" or in KVM, setting ./qemu-system-x86_64 -smp 2, maxcpus=4 ... the num_possible_cpu() will be 4 and sysconf() will be 2 [2]. [...] Documentation/cputopology.txt says /sys/devices/system/cpu/possible outputs cpu_possible_mask. That is the same as in num_possible_cpus(), so first step would be to fix the _SC_NPROCESSORS_CONF calls with our own implementation. Later, we could add support to bpf(2) for passing a mask via CPU_SET(3), for example, to just select a subset of CPUs. BPF samples code needs this fix as well (at least so that people stop copying this). Thus, define bpf_num_possible_cpus() once in selftests and import it from there for the sample code to avoid duplicating it. The remaining sysconf(_SC_NPROCESSORS_CONF) in samples are unrelated. After all three issues are fixed, the test suite runs fine again: # make run_tests | grep self selftests: test_verifier [PASS] selftests: test_maps [PASS] selftests: test_lru_map [PASS] selftests: test_kmod.sh [PASS] [1] https://www.sourceware.org/ml/libc-alpha/2011-06/msg00079.html [2] https://www.mail-archive.com/netdev@vger.kernel.org/msg121183.html Fixes: 3059303f59cf ("samples/bpf: update tracex[23] examples to use per-cpu maps") Fixes: 86af8b4191d2 ("Add sample for adding simple drop program to link") Fixes: df570f577231 ("samples/bpf: unit test for BPF_MAP_TYPE_PERCPU_ARRAY") Fixes: e15596717948 ("samples/bpf: unit test for BPF_MAP_TYPE_PERCPU_HASH") Fixes: ebb676daa1a3 ("bpf: Print function name in addition to function id") Fixes: 5db58faf989f ("bpf: Add tests for the LRU bpf_htab") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: William Tu <u9012063@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
All conflicts were simple overlapping changes except perhaps for the Thunder driver. That driver has a change_mtu method explicitly for sending a message to the hardware. If that fails it returns an error. Normally a driver doesn't need an ndo_change_mtu method becuase those are usually just range changes, which are now handled generically. But since this extra operation is needed in the Thunder driver, it has to stay. However, if the message send fails we have to restore the original MTU before the change because the entire call chain expects that if an error is thrown by ndo_change_mtu then the MTU did not change. Therefore code is added to nicvf_change_mtu to remember the original MTU, and to restore it upon nicvf_update_hw_max_frs() failue. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18Merge tag 'acpi-4.9-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "They fix an ACPI thermal management regression introduced by a recent FADT handling cleanup, an ACPI tools build issue introduced by a recent ACPICA commit and a PCC mailbox initialization bug causing lockdep to complain loudly. Specifics: - Revert a recent ACPICA cleanup that attempted to get rid of all FADT version 2 legacy, but broke ACPI thermal management on at least one system (Rafael Wysocki). - Fix cross-compiled builds of ACPI tools that stopped working after a recent cleanup related to the handling of header files in ACPICA (Lv Zheng). - Fix a locking issue in the PCC channel initialization code that invokes devm_request_irq() under a spinlock (among other things) and causes lockdep to complain (Hoan Tran)" * tag 'acpi-4.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: tools/power/acpi: Remove direct kernel source include reference mailbox: PCC: Fix lockdep warning when request PCC channel Revert "ACPICA: FADT support cleanup"
2016-11-16tools/power/acpi: Remove direct kernel source include referenceLv Zheng
Avoid breaking cross-compiled ACPI tools builds by rearranging the handling of kernel header files. This patch also contains OUTPUT/srctree cleanups in order to make above fix working for various build environments. Fixes: e323c02dee59 (ACPICA: MSVC9: Fix <sys/stat.h> inclusion order issue) Reported-and-tested-by: Yisheng Xie <xieyisheng1@huawei.com> Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-15bpf: Add tests for the LRU bpf_htabMartin KaFai Lau
This patch has some unit tests and a test_lru_dist. The test_lru_dist reads in the numeric keys from a file. The files used here are generated by a modified fio-genzipf tool originated from the fio test suit. The sample data file can be found here: https://github.com/iamkafai/bpf-lru The zipf.* data files have 100k numeric keys and the key is also ranged from 1 to 100k. The test_lru_dist outputs the number of unique keys (nr_unique). F.e. The following means, 61239 of them is unique out of 100k keys. nr_misses means it cannot be found in the LRU map, so nr_misses must be >= nr_unique. test_lru_dist also simulates a perfect LRU map as a comparison: [root@arch-fb-vm1 ~]# ~/devshare/fb-kernel/linux/samples/bpf/test_lru_dist \ /root/zipf.100k.a1_01.out 4000 1 ... test_parallel_lru_dist (map_type:9 map_flags:0x0): task:0 BPF LRU: nr_unique:23093(/100000) nr_misses:31603(/100000) task:0 Perfect LRU: nr_unique:23093(/100000 nr_misses:34328(/100000) .... test_parallel_lru_dist (map_type:9 map_flags:0x2): task:0 BPF LRU: nr_unique:23093(/100000) nr_misses:31710(/100000) task:0 Perfect LRU: nr_unique:23093(/100000 nr_misses:34328(/100000) [root@arch-fb-vm1 ~]# ~/devshare/fb-kernel/linux/samples/bpf/test_lru_dist \ /root/zipf.100k.a0_01.out 40000 1 ... test_parallel_lru_dist (map_type:9 map_flags:0x0): task:0 BPF LRU: nr_unique:61239(/100000) nr_misses:67054(/100000) task:0 Perfect LRU: nr_unique:61239(/100000 nr_misses:66993(/100000) ... test_parallel_lru_dist (map_type:9 map_flags:0x2): task:0 BPF LRU: nr_unique:61239(/100000) nr_misses:67068(/100000) task:0 Perfect LRU: nr_unique:61239(/100000 nr_misses:66993(/100000) LRU map has also been added to map_perf_test: /* Global LRU */ [root@kerneltest003.31.prn1 ~]# for i in 1 4 8; do echo -n "$i cpus: "; \ ./map_perf_test 16 $i | awk '{r += $3}END{print r " updates"}'; done 1 cpus: 2934082 updates 4 cpus: 7391434 updates 8 cpus: 6500576 updates /* Percpu LRU */ [root@kerneltest003.31.prn1 ~]# for i in 1 4 8; do echo -n "$i cpus: "; \ ./map_perf_test 32 $i | awk '{r += $3}END{print r " updates"}'; done 1 cpus: 2896553 updates 4 cpus: 9766395 updates 8 cpus: 17460553 updates Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Several cases of bug fixes in 'net' overlapping other changes in 'net-next-. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-14Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "An uncore PMU driver hardware enablement change for Intel SkyLake uncore PMUs (Skylake Y, U, H and S platforms), plus a number of tooling fixes for the histogram handling/displaying code" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Add more Intel uncore IMC PCI IDs for SkyLake perf hists: Fix column length on --hierarchy perf hists browser: Fix column indentation on --hierarchy perf hists browser: Show folded sign properly on --hierarchy perf hists browser: Fix indentation of folded sign on --hierarchy perf hist browser: Fix hierarchy column counts
2016-11-12Merge tag 'perf-hists-hierarchy-fixes-for-mingo-20161111' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes for perf {top,report} --hierarchy, from Arnaldo Carvalho de Melo: - These are fixes for the --hierarchy view of perf top and report, fixing output oddities, mostly related to scrolling. (Namhyung Kim) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-11Merge branches 'pm-tools-fixes' and 'pm-sleep-fixes'Rafael J. Wysocki
* pm-tools-fixes: cpupower: Correct return type of cpu_power_is_cpu_online() in cpufreq-set * pm-sleep-fixes: PM / sleep: don't suspend parent when async child suspend_{noirq, late} fails PM / sleep: fix device reference leak in test_suspend
2016-11-09perf hists: Fix column length on --hierarchyNamhyung Kim
Markus reported that there's a weird behavior on perf top --hierarchy regarding the column length. Looking at the code, I found a dubious code which affects the symptoms. When --hierarchy option is used, the last column length might be inaccurate since it skips to update the length on leaf entries. I cannot remember why it did and looks like a leftover from previous version during the development. Anyway, updating the column length often is not harmful. So let's move the code out. Reported-and-Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 1a3906a7e6b9 ("perf hists: Resort hist entries with hierarchy") Link: http://lkml.kernel.org/r/20161108130833.9263-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-09perf hists browser: Fix column indentation on --hierarchyNamhyung Kim
When horizontall scrolling is used in hierarchy mode, the the right most column has unnecessary indentation. Actually it's needed only if some of left (overhead) columns were shown. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161108130833.9263-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-09perf hists browser: Show folded sign properly on --hierarchyNamhyung Kim
When horizontal scrolling is used in hierarchy mode, the folded signed disappears at the right most column. Committer note: To test it, run 'perf top --hierarchy, see the '+' symbol at the first column, then press the right arrow key, the '+' symbol will disappear, this patch fixes that. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161108130833.9263-3-namhyung@kernel.org [ Move 'width -= 2' invariant to right after the if/else ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-09perf hists browser: Fix indentation of folded sign on --hierarchyNamhyung Kim
It should indent 2 spaces for folded sign and a whitespace. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161108130833.9263-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-09perf hist browser: Fix hierarchy column countsNamhyung Kim
The perf report/top on TUI supports horizontal scrolling using LEFT and RIGHT keys. But it calculate the number of columns incorrectly when hierarchy mode is enabled so that keep pressing RIGHT key can make the output disappeared. In the hierarchy mode, all sort keys are collapsed into a single column, so it needs to be applied when calculating column numbers. Reported-and-Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161024162110.17918-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-01cpupower: Correct return type of cpu_power_is_cpu_online() in cpufreq-setLaura Abbott
When converting to a shared library in ac5a181d065d ("cpupower: Add cpuidle parts into library"), cpu_freq_cpu_exists() was converted to cpupower_is_cpu_online(). cpu_req_cpu_exists() returned 0 on success and -ENOSYS on failure whereas cpupower_is_cpu_online returns 1 on success. Check for the correct return value in cpufreq-set. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1374212 Fixes: ac5a181d065d (cpupower: Add cpuidle parts into library) Reported-by: Julian Seward <jseward@acm.org> Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Thomas Renninger <trenn@suse.com> Cc: 4.7+ <stable@vger.kernel.org> # 4.7+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-31ringtest: poll for new buffers once before updating event indexPaolo Bonzini
Updating the event index has a memory barrier and causes more work on the other side to actually signal the event. It is unnecessary if a new buffer has already appeared on the ring, so poll once before doing the update. The effect of this on the 0.9 ring implementation is pretty much invisible, but on the new-style ring it provides a consistent 3% performance improvement. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-31ringtest: commonize implementation of poll_avail/poll_usedPaolo Bonzini
Provide new primitives used_empty/avail_empty and build poll_avail/poll_used on top of it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-31ringtest: use link-time optimizationPaolo Bonzini
By using -flto and -fwhole-program, all functions from the ring implementation can be treated as static and possibly inlined. Force this to happen through the GCC flatten attribute. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Mostly simple overlapping changes. For example, David Ahern's adjacency list revamp in 'net-next' conflicted with an adjacency list traversal bug fix in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27objtool: Fix rare switch jump table pattern detectionJosh Poimboeuf
The following commit: 3732710ff6f2 ("objtool: Improve rare switch jump table pattern detection") ... improved objtool's ability to detect GCC switch statement jump tables for GCC 6. However the check to allow short jumps with the scanned range of instructions wasn't quite right. The pattern detection should allow jumps to the indirect jump instruction itself. This fixes the following warning: drivers/infiniband/sw/rxe/rxe_comp.o: warning: objtool: rxe_completer()+0x315: sibling call from callable instruction with changed frame pointer Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 3732710ff6f2 ("objtool: Improve rare switch jump table pattern detection") Link: http://lkml.kernel.org/r/20161026153408.2rifnw7bvoc5sex7@treble Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-22reuseport, bpf: add test case for bpf_get_numa_node_idDaniel Borkmann
The test case is very similar to reuseport_bpf_cpu, only that here we select socket members based on current numa node id. # numactl -H available: 2 nodes (0-1) node 0 cpus: 0 1 2 3 4 5 12 13 14 15 16 17 node 0 size: 128867 MB node 0 free: 120080 MB node 1 cpus: 6 7 8 9 10 11 18 19 20 21 22 23 node 1 size: 96765 MB node 1 free: 87504 MB node distances: node 0 1 0: 10 20 1: 20 10 # ./reuseport_bpf_numa ---- IPv4 UDP ---- send node 0, receive socket 0 send node 1, receive socket 1 send node 1, receive socket 1 send node 0, receive socket 0 ---- IPv6 UDP ---- send node 0, receive socket 0 send node 1, receive socket 1 send node 1, receive socket 1 send node 0, receive socket 0 ---- IPv4 TCP ---- send node 0, receive socket 0 send node 1, receive socket 1 send node 1, receive socket 1 send node 0, receive socket 0 ---- IPv6 TCP ---- send node 0, receive socket 0 send node 1, receive socket 1 send node 1, receive socket 1 send node 0, receive socket 0 SUCCESS Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19x86/cpufeature: Add AVX512_4VNNIW and AVX512_4FMAPS featuresPiotr Luc
AVX512_4VNNIW - Vector instructions for deep learning enhanced word variable precision. AVX512_4FMAPS - Vector instructions for deep learning floating-point single precision. These new instructions are to be used in future Intel Xeon & Xeon Phi processors. The bits 2&3 of CPUID[level:0x07, EDX] inform that new instructions are supported by a processor. The spec can be found in the Intel Software Developer Manual (SDM) or in the Instruction Set Extensions Programming Reference (ISE). Define new feature flags to enumerate the new instructions in /proc/cpuinfo accordingly to CPUID bits and add the required xsave extensions which are required for proper operation. Signed-off-by: Piotr Luc <piotr.luc@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20161018150111.29926-1-piotr.luc@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-19bpf: Detect identical PTR_TO_MAP_VALUE_OR_NULL registersThomas Graf
A BPF program is required to check the return register of a map_elem_lookup() call before accessing memory. The verifier keeps track of this by converting the type of the result register from PTR_TO_MAP_VALUE_OR_NULL to PTR_TO_MAP_VALUE after a conditional jump ensures safety. This check is currently exclusively performed for the result register 0. In the event the compiler reorders instructions, BPF_MOV64_REG instructions may be moved before the conditional jump which causes them to keep their type PTR_TO_MAP_VALUE_OR_NULL to which the verifier objects when the register is accessed: 0: (b7) r1 = 10 1: (7b) *(u64 *)(r10 -8) = r1 2: (bf) r2 = r10 3: (07) r2 += -8 4: (18) r1 = 0x59c00000 6: (85) call 1 7: (bf) r4 = r0 8: (15) if r0 == 0x0 goto pc+1 R0=map_value(ks=8,vs=8) R4=map_value_or_null(ks=8,vs=8) R10=fp 9: (7a) *(u64 *)(r4 +0) = 0 R4 invalid mem access 'map_value_or_null' This commit extends the verifier to keep track of all identical PTR_TO_MAP_VALUE_OR_NULL registers after a map_elem_lookup() by assigning them an ID and then marking them all when the conditional jump is observed. Signed-off-by: Thomas Graf <tgraf@suug.ch> Reviewed-by: Josef Bacik <jbacik@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Four tooling fixes, two kprobes KASAN related fixes and an x86 PMU driver fix/cleanup" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf jit: Fix build issue on Ubuntu perf jevents: Handle events including .c and .o perf/x86/intel: Remove an inconsistent NULL check kprobes: Unpoison stack in jprobe_return() for KASAN kprobes: Avoid false KASAN reports during stack copy perf header: Set nr_numa_nodes only when we parsed all the data perf top: Fix refreshing hierarchy entries on TUI
2016-10-18bpf: add initial suite for selftestsDaniel Borkmann
Add a start of a test suite for kernel selftests. This moves test_verifier and test_maps over to tools/testing/selftests/bpf/ along with various code improvements and also adds a script for invoking test_bpf module. The test suite can simply be run via selftest framework, f.e.: # cd tools/testing/selftests/bpf/ # make # make run_tests Both test_verifier and test_maps were kind of misplaced in samples/bpf/ directory and we were looking into adding them to selftests for a while now, so it can be picked up by kbuild bot et al and hopefully also get more exposure and thus new test case additions. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc fixes from Ingo Molnar: "A CPU hotplug debuggability fix and three objtool false positive warnings fixes for new GCC6 code generation patterns" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Use distinct name for cpu_hotplug.dep_map objtool: Skip all "unreachable instruction" warnings for gcov kernels objtool: Improve rare switch jump table pattern detection objtool: Support '-mtune=atom' stack frame setup instruction
2016-10-17Merge tag 'perf-urgent-for-mingo-20161017' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix handling of NUMA nodes in perf.data files (Jiri Olsa) - Fix scrolling when refreshing 'perf top --tui --hierarchy' entries (Namhyung Kim) - Fix building of JIT support on Ubuntu 16.04 (Anton Blanchard) - Fix handling of events including .c and .o, that were being treated as BPF scripts instead of vendor ones (Wang Nan) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-17perf jit: Fix build issue on UbuntuAnton Blanchard
When building on Ubuntu 16.04, I get the following error: Makefile:49: *** the openjdk development package appears to me missing, install and try again. Stop. The problem is that update-java-alternatives has multiple spaces between fields, and cut treats each space as a new delimiter: java-1.8.0-openjdk-ppc64el 1081 /usr/lib/jvm/java-1.8.0-openjdk-ppc64el Fix this by using awk, which handles this fine. Signed-off-by: Anton Blanchard <anton@samba.org> Reviewed-by: Stephane Eranian <eranian@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1476325243-15788-1-git-send-email-anton@ozlabs.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-17perf jevents: Handle events including .c and .oWang Nan
This patch helps with Sukadev's vendor event tree where such events can happen. >From Andi Kleen: Any event including a .c/.o/.bpf currently triggers BPF compilation or loading and then an error. This can happen for some Intel vendor events, which cannot be used. This patch fixes this problem by forbidding BPF file patch containing '{', '}' and ',', make sure flex consumes the leading '{', instead of matching it using a BPF file path. Tested result: $ perf stat -e '{unc_p_clockticks,unc_p_power_state_occupancy.cores_c0}' -a -I 1000 invalid or unsupported event: '{unc_p_clockticks,unc_p_power_state_occupancy.cores_c0}' Run 'perf list' for a list of valid events (as expected, interperted as event) $ perf stat -e 'aaa.c' -a -I 1000 ERROR: problems with path aaa.c: No such file or directory (as expected, interpreted as BPF source) $ perf stat -e 'aaa.ccc' -a -I 1000 invalid or unsupported event: 'aaa.ccc' (as expected, interpreted as event) $ perf stat -e '{aaa.c}' -a -I 1000 ERROR: problems with path aaa.c: No such file or directory event syntax error: '{aaa.c}' <SKIP> (as expected, interpreted as BPF source) $ perf stat -e '{cycles,aaa.c}' -a -I 1000 ERROR: problems with path aaa.c: No such file or directory event syntax error: '{cycles,aaa.c}' (as expected, interpreted as BPF source) Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Reported-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1475900185-37967-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-16objtool: Skip all "unreachable instruction" warnings for gcov kernelsJosh Poimboeuf
Recently objtool has started reporting a few "unreachable instruction" warnings when CONFIG_GCOV is enabled for newer versions of GCC. Usually this warning means there's some new control flow that objtool doesn't understand. But in this case, objtool is correct and the instructions really are inaccessible. It's an annoying quirk of gcov, but it's harmless, so it's ok to just silence the warnings. With older versions of GCC, it was relatively easy to detect gcov-specific instructions and to skip any unreachable warnings produced by them. But GCC 6 has gotten craftier. Instead of continuing to play whack-a-mole with gcov, just use a bigger, more permanent hammer and disable unreachable warnings for the whole file when gcov is enabled. This is fine to do because a) unreachable warnings are usually of questionable value; and b) gcov isn't used for production kernels and we can relax the checks a bit there. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/38d5c87d61d9cd46486dd2c86f46603dff0df86f.1476393584.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-16objtool: Improve rare switch jump table pattern detectionJosh Poimboeuf
GCC 6 added a new switch statement jump table optimization which makes objtool's life harder. It looks like: mov [rodata addr],%reg1 ... some instructions ... jmpq *(%reg1,%reg2,8) The optimization is quite rare, but objtool still needs to be able to identify the pattern so that it can follow all possible control flow paths related to the switch statement. In order to detect the pattern, objtool starts from the indirect jump and scans backwards through the function until it finds the first instruction in the pattern. If it encounters an unconditional jump along the way, it stops and considers the pattern to be not found. As it turns out, unconditional jumps can happen, as long as they are small forward jumps within the range being scanned. This fixes the following warnings: drivers/infiniband/sw/rxe/rxe_comp.o: warning: objtool: rxe_completer()+0x2f4: sibling call from callable instruction with changed frame pointer drivers/infiniband/sw/rxe/rxe_resp.o: warning: objtool: rxe_responder()+0x10f: sibling call from callable instruction with changed frame pointer Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/8a9ed68ae1780e8d3963e4ee13f2f257fe3a3c33.1476393584.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-14Merge tag 'linux-kselftest-4.9-rc1-update' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates from Shuah Khan: "This update consists of: - Fixes and improvements to existing tests - Moving code from Documentation to selftests, samples, and tools: * Moves dnotify_test, prctl, ptp, vDSO, ia64, watchdog, and networking tests from Documentation to selftests. * Moves mic/mpssd, misc-devices/mei, timers, watchdog, auxdisplay, and blackfin examples from Documentation to samples. * Moves accounting, laptops/dslm, and pcmcia/crc32hash tools from Documentation to tools. * Deletes BUILD_DOCSRC and its dependencies" * tag 'linux-kselftest-4.9-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (21 commits) selftests/futex: Check ANSI terminal color support Doc: update 00-INDEX files to reflect the runnable code move samples: move blackfin gptimers-example from Documentation tools: move pcmcia crc32hash tool from Documentation tools: move laptops dslm tool from Documentation tools: move accounting tool from Documentation samples: move auxdisplay example code from Documentation samples: move watchdog example code from Documentation samples: move timers example code from Documentation samples: move misc-devices/mei example code from Documentation samples: move mic/mpssd example code from Documentation selftests: Move networking/timestamping from Documentation selftests: move watchdog tests from Documentation/watchdog selftests: move ia64 tests from Documentation/ia64 selftests: move vDSO tests from Documentation/vDSO selftests: move ptp tests from Documentation/ptp selftests: move prctl tests from Documentation/prctl selftests: move dnotify_test from Documentation/filesystems selftests/timers: Add missing error code assignment before test selftests/zram: replace ZRAM_LZ4_COMPRESS ...
2016-10-14Merge tag 'powerpc-4.9-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc updates from Michael Ellerman: "Some more powerpc updates for 4.9: Freescale updates from Scott Wood: - qbman support (a prerequisite for datapath drivers such as ethernet) - a PCI DMA fix+improvement - reset handler changes - more 8xx optimizations - some cleanups and fixes.' Fixes: - selftests/powerpc: Add missing binaries to .gitignores (Michael Ellerman) - selftests/powerpc: Fix build break caused by EXPORT_SYMBOL changes (Michael Ellerman) - powerpc/pseries: Fix stack corruption in htpe code (Laurent Dufour) - powerpc/64s: Fix power4_fixup_nap placement (Nicholas Piggin) - powerpc/64: Fix incorrect return value from __copy_tofrom_user (Paul Mackerras) - powerpc/mm/hash64: Fix might_have_hea() check (Michael Ellerman) Other: - MAINTAINERS: Remove myself from PA Semi entries (Olof Johansson) - MAINTAINERS: Drop separate pseries entry (Michael Ellerman) - MAINTAINERS: Update powerpc website & add selftests (Michael Ellerman): * tag 'powerpc-4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (35 commits) powerpc/mm/hash64: Fix might_have_hea() check powerpc/64: Fix incorrect return value from __copy_tofrom_user powerpc/64s: Fix power4_fixup_nap placement powerpc/pseries: Fix stack corruption in htpe code selftests/powerpc: Fix build break caused by EXPORT_SYMBOL changes MAINTAINERS: Update powerpc website & add selftests MAINTAINERS: Drop separate pseries entry MAINTAINERS: Remove myself from PA Semi entries selftests/powerpc: Add missing binaries to .gitignores arch/powerpc: Add CONFIG_FSL_DPAA to corenetXX_smp_defconfig soc/qman: Add self-test for QMan driver soc/bman: Add self-test for BMan driver soc/fsl: Introduce DPAA 1.x QMan device driver soc/fsl: Introduce DPAA 1.x BMan device driver powerpc/8xx: make user addr DTLB miss the short path powerpc/8xx: Move additional DTLBMiss handlers out of exception area powerpc/8xx: use r3 to scratch CR in ITLBmiss soc/fsl/qe: fix gpio save_regs functions powerpc/8xx: add dedicated machine check handler powerpc/8xx: add system_reset_exception ...
2016-10-13perf header: Set nr_numa_nodes only when we parsed all the dataJiri Olsa
Sukadev reported segfault on releasing perf env's numa data. It's due to nr_numa_nodes being set no matter if the numa data gets parsed properly. The perf_env__exit crash the on releasing non existed data. Setting nr_numa_nodes only when data are parsed out properly. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Reported-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-dt9c0zgkt4hybn2cr4xiawta@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-13perf top: Fix refreshing hierarchy entries on TUINamhyung Kim
Markus reported that 'perf top --hierarchy' cannot scroll down after refresh. This was because the number of entries are not updated when hierarchy is enabled. Unlike normal report view, hierarchy mode needs to keep its own entry count since it can have non-leaf entries which can expand/collapse. Reported-and-Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: f5b763feebe9 ("perf hists browser: Count number of hierarchy entries") Link: http://lkml.kernel.org/r/20161007050412.3000-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-11Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: - a few block updates that fell in my lap - lib/ updates - checkpatch - autofs - ipc - a ton of misc other things * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (100 commits) mm: split gfp_mask and mapping flags into separate fields fs: use mapping_set_error instead of opencoded set_bit treewide: remove redundant #include <linux/kconfig.h> hung_task: allow hung_task_panic when hung_task_warnings is 0 kthread: add kerneldoc for kthread_create() kthread: better support freezable kthread workers kthread: allow to modify delayed kthread work kthread: allow to cancel kthread work kthread: initial support for delayed kthread work kthread: detect when a kthread work is used by more workers kthread: add kthread_destroy_worker() kthread: add kthread_create_worker*() kthread: allow to call __kthread_create_on_node() with va_list args kthread/smpboot: do not park in kthread_create_on_cpu() kthread: kthread worker API cleanup kthread: rename probe_kthread_data() to kthread_probe_data() scripts/tags.sh: enable code completion in VIM mm: kmemleak: avoid using __va() on addresses that don't have a lowmem mapping kdump, vmcoreinfo: report memory sections virtual addresses ipc/sem.c: add cond_resched in exit_sme ...
2016-10-11treewide: remove redundant #include <linux/kconfig.h>Masahiro Yamada
Kernel source files need not include <linux/kconfig.h> explicitly because the top Makefile forces to include it with: -include $(srctree)/include/linux/kconfig.h This commit removes explicit includes except the following: * arch/s390/include/asm/facilities_src.h * tools/testing/radix-tree/linux/kernel.h These two are used for host programs. Link: http://lkml.kernel.org/r/1473656164-11929-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11radix-tree tests: properly initialize mutexRoss Zwisler
The pthread_mutex_t in regression1.c wasn't being initialized properly. Link: http://lkml.kernel.org/r/20160815194237.25967-4-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>