summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2024-10-03libbpf: Improve log message formattingTony Ambardar
Fix missing newlines and extraneous terminal spaces in messages. Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/086884b7cbf87e524d584f9bf87f7a580e378b2b.1726475448.git.tony.ambardar@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-10-03selftests/bpf: Fix uprobe_multi compilation errorAlan Maguire
When building selftests, the following was seen: uprobe_multi.c: In function ‘trigger_uprobe’: uprobe_multi.c:108:40: error: ‘MADV_PAGEOUT’ undeclared (first use in this function) 108 | madvise(addr, page_sz, MADV_PAGEOUT); | ^~~~~~~~~~~~ uprobe_multi.c:108:40: note: each undeclared identifier is reported only once for each function it appears in make: *** [Makefile:850: bpf-next/tools/testing/selftests/bpf/uprobe_multi] Error 1 ...even with updated UAPI headers. It seems the above value is defined in UAPI <linux/mman.h> but including that file triggers other redefinition errors. Simplest solution is to add a guarded definition, as was done for MADV_POPULATE_READ. Fixes: 3c217a182018 ("selftests/bpf: add build ID tests") Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/bpf/20240926144948.172090-1-alan.maguire@oracle.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-10-03libbpf: Remove unneeded semicolonChen Ni
Remove unneeded semicolon in zip_archive_open(). Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240926023823.3632993-1-nichen@iscas.ac.cn Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-10-03tools/bpf: Remove unused variable from runqslowerZhu Jun
This variable is never referenced in the code, just remove it. Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240925100005.3989-1-zhujun2@cmss.chinamobile.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-10-03selftests/bpf: vm: Add support for VIRTIO_FSManu Bretelle
danobi/vmtest is going to migrate from using 9p to using virtio_fs to mount the local rootfs: https://github.com/danobi/vmtest/pull/88 BPF CI uses danobi/vmtest to run bpf selftests and will need to support VIRTIO_FS. This change enables new kconfigs to be able to support the upcoming danobi/vmtest. Tested by building a new kernel with those config and confirming it would successfully run with 9p (currently what is used by vmtest), and with virtio_fs (using a local build of vmtest). $ vmtest -k arch/x86/boot/bzImage "findmnt /" => bzImage ===> Booting ===> Setting up VM ===> Running command TARGET SOURCE FSTYPE OPTIONS / /dev/root 9p rw,relatime,cache=5,access=client,msize=512000,trans=virtio $ /home/chantra/local/danobi-vmtest/target/debug/vmtest -k arch/x86/boot/bzImage "findmnt /" => bzImage ===> Initializing host environment ===> Booting ===> Setting up VM ===> Running command TARGET SOURCE FSTYPE OPTIONS / rootfs virtiofs rw,relatime Changes in v2: * Sorted configs alphabetically Signed-off-by: Manu Bretelle <chantr4@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Daniel Xu <dxu@dxuuu.xyz> Link: https://lore.kernel.org/bpf/20240925002210.501266-1-chantr4@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-10-03libbpf: Fix expected_attach_type set handling in program load callbackTao Chen
Referenced commit broke the logic of resetting expected_attach_type to zero for allowed program types if kernel doesn't yet support such field. We do need to overwrite and preserve expected_attach_type for multi-uprobe though, but that can be done explicitly in libbpf_prepare_prog_load(). Fixes: 5902da6d8a52 ("libbpf: Add uprobe multi link support to bpf_program__attach_usdt") Suggested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Tao Chen <chen.dylane@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240925153012.212866-1-chen.dylane@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-10-03libbpf: Change log level of BTF loading error messageIhor Solodrai
Reduce log level of BTF loading error to INFO if BTF is not required. Andrii says: Nowadays the expectation is that the BPF program will have a valid .BTF section, so even though .BTF is "optional", I think it's fine to emit a warning for that case (any reasonably recent Clang will produce valid BTF). Ihor's patch is fixing the situation with an outdated host kernel that doesn't understand BTF. libbpf will try to "upload" the program's BTF, but if that fails and the BPF object doesn't use any features that require having BTF uploaded, then it's just an information message to the user, but otherwise can be ignored. Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me> Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-10-03selftests/bpf: Add missing va_end.Zhang Jiao
There is no va_end after va_copy, just add it. Signed-off-by: Zhang Jiao <zhangjiao2@cmss.chinamobile.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20240924045534.8672-1-zhangjiao2@cmss.chinamobile.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-10-03selftests/bpf: Bail out quickly from failing consumer testJiri Olsa
Let's bail out from consumer test after we hit first fail, so we don't pollute the log with many instances with possibly the same error. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-10-03selftests/bpf: Fix uprobe consumer testJiri Olsa
With newly merged code the uprobe behaviour is slightly different and affects uprobe consumer test. We no longer need to check if the uprobe object is still preserved after removing last uretprobe, because it stays as long as there's pending/installed uretprobe instance. This allows to run uretprobe consumers registered 'after' uprobe was hit even if previous uretprobe got unregistered before being hit. The uprobe object will be now removed after the last uprobe ref is released and in such case it's held by ri->uprobe (return instance) which is released after the uretprobe is hit. Reported-by: Ihor Solodrai <ihor.solodrai@pm.me> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Ihor Solodrai <ihor.solodrai@pm.me> Closes: https://lore.kernel.org/bpf/w6U8Z9fdhjnkSp2UaFaV1fGqJXvfLEtDKEUyGDkwmoruDJ_AgF_c0FFhrkeKW18OqiP-05s9yDKiT6X-Ns-avN_ABf0dcUkXqbSJN1TQSXo=@pm.me/ Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-10-03selftests/bpf: Set vpath in Makefile to search for skelsIhor Solodrai
Auto-dependencies generated for %.test.o files refer to skels using filenames as opposed to full paths. This requires make to be able to link this name to an actual path, because not all generated skels are put in the working directory. In the original patch [1], this was mitigated by this target: $(notdir %.skel.h): $(TRUNNER_OUTPUT)/%.skel.h @true This turned out to be insufficient. First, %.lskel.h and %.subskel.h were missed, because a typical selftests/bpf build could find these files in the working directory. This error was detected by an out-of-tree build [2]. Second, even with missing rules added, this target causes unnecessary rebuilds in the out-of-tree case, as X.skel.h is searched for in the working directory, and not in the $(OUTPUT). Using vpath directive [3] is a better solution. Instead of introducing a separate target (X.skel.h in addition to $(TRUNNER_OUTPUT)/X.skel.h), make is instructed to search for skels in the output, which allows make to correctly detect that skel has already been generated. [1]: https://lore.kernel.org/bpf/VJihUTnvtwEgv_mOnpfy7EgD9D2MPNoHO-MlANeLIzLJPGhDeyOuGKIYyKgk0O6KPjfM-MuhtvPwZcngN8WFqbTnTRyCSMc2aMZ1ODm1T_g=@pm.me/ [2]: https://lore.kernel.org/bpf/CIjrhJwoIqMc2IhuppVqh4ZtJGbx8kC8rc9PHhAIU6RccnWT4I04F_EIr4GxQwxZe89McuGJlCnUk9UbkdvWtSJjAsd7mHmnTy9F8K2TLZM=@pm.me/ [3]: https://www.gnu.org/software/make/manual/html_node/Selective-Search.html Reported-by: Björn Töpel <bjorn@kernel.org> Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Tested-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/bpf/20240916195919.1872371-2-ihor.solodrai@pm.me Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-10-03selftests/bpf: Remove test_skb_cgroup_id.sh from TEST_PROGSIhor Solodrai
test_skb_cgroup_id.sh was deleted in https://git.kernel.org/bpf/bpf-next/c/f957c230e173 It has to be removed from TEST_PROGS variable in tools/testing/selftests/bpf/Makefile, otherwise install target fails. Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Tested-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/bpf/20240916195919.1872371-1-ihor.solodrai@pm.me Link: https://lore.kernel.org/bpf/Q3BN2kW9Kgy6LkrDOwnyY4Pv7_YF8fInLCd2_QA3LimKYM3wD64kRdnwp7blwG2dI_s7UGnfUae-4_dOmuTrxpYCi32G_KTzB3PfmxIerH8=@pm.me/ Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-10-03rtla: Fix the help text in osnoise and timerlat top toolsEder Zulian
The help text in osnoise top and timerlat top had some minor errors and omissions. The -d option was missing the 's' (second) abbreviation and the error message for '-d' used '-D'. Cc: stable@vger.kernel.org Fixes: 1eceb2fc2ca54 ("rtla/osnoise: Add osnoise top mode") Fixes: a828cd18bc4ad ("rtla: Add timerlat tool and timelart top mode") Link: https://lore.kernel.org/20240813155831.384446-1-ezulian@redhat.com Suggested-by: Tomas Glozar <tglozar@redhat.com> Reviewed-by: Tomas Glozar <tglozar@redhat.com> Signed-off-by: Eder Zulian <ezulian@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-10-03tools/rtla: Fix installation from out-of-tree buildBen Hutchings
rtla now supports out-of-tree builds, but installation fails as it still tries to install the rtla binary from the source tree. Use the existing macro $(RTLA) to refer to the binary. Link: https://lore.kernel.org/ZudubuoU_JHjPZ7w@decadent.org.uk Fixes: 01474dc706ca ("tools/rtla: Use tools/build makefiles to build rtla") Reviewed-by: Tomas Glozar <tglozar@redhat.com> Tested-by: Tomas Glozar <tglozar@redhat.com> Signed-off-by: Ben Hutchings <benh@debian.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-10-03Merge tag 'net-6.12-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from ieee802154, bluetooth and netfilter. Current release - regressions: - eth: mlx5: fix wrong reserved field in hca_cap_2 in mlx5_ifc - eth: am65-cpsw: fix forever loop in cleanup code Current release - new code bugs: - eth: mlx5: HWS, fixed double-free in error flow of creating SQ Previous releases - regressions: - core: avoid potential underflow in qdisc_pkt_len_init() with UFO - core: test for not too small csum_start in virtio_net_hdr_to_skb() - vrf: revert "vrf: remove unnecessary RCU-bh critical section" - bluetooth: - fix uaf in l2cap_connect - fix possible crash on mgmt_index_removed - dsa: improve shutdown sequence - eth: mlx5e: SHAMPO, fix overflow of hd_per_wq - eth: ip_gre: fix drops of small packets in ipgre_xmit Previous releases - always broken: - core: fix gso_features_check to check for both dev->gso_{ipv4_,}max_size - core: fix tcp fraglist segmentation after pull from frag_list - netfilter: nf_tables: prevent nf_skb_duplicated corruption - sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start - mac802154: fix potential RCU dereference issue in mac802154_scan_worker - eth: fec: restart PPS after link state change" * tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits) sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start dt-bindings: net: xlnx,axi-ethernet: Add missing reg minItems doc: net: napi: Update documentation for napi_schedule_irqoff net/ncsi: Disable the ncsi work before freeing the associated structure net: phy: qt2025: Fix warning: unused import DeviceId gso: fix udp gso fraglist segmentation after pull from frag_list bridge: mcast: Fail MDB get request on empty entry vrf: revert "vrf: Remove unnecessary RCU-bh critical section" net: ethernet: ti: am65-cpsw: Fix forever loop in cleanup code net: phy: realtek: Check the index value in led_hw_control_get ppp: do not assume bh is held in ppp_channel_bridge_input() selftests: rds: move include.sh to TEST_FILES net: test for not too small csum_start in virtio_net_hdr_to_skb() net: gso: fix tcp fraglist segmentation after pull from frag_list ipv4: ip_gre: Fix drops of small packets in ipgre_xmit net: stmmac: dwmac4: extend timeout for VLAN Tag register busy bit check net: add more sanity checks to qdisc_pkt_len_init() net: avoid potential underflow in qdisc_pkt_len_init() with UFO net: ethernet: ti: cpsw_ale: Fix warning on some platforms net: microchip: Make FDMA config symbol invisible ...
2024-10-03Merge tag 'nf-24-10-02' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix incorrect documentation in uapi/linux/netfilter/nf_tables.h regarding flowtable hooks, from Phil Sutter. 2) Fix nft_audit.sh selftests with newer nft binaries, due to different (valid) audit output, also from Phil. 3) Disable BH when duplicating packets via nf_dup infrastructure, otherwise race on nf_skb_duplicated for locally generated traffic. From Eric. 4) Missing return in callback of selftest C program, from zhang jiao. netfilter pull request 24-10-02 * tag 'nf-24-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: selftests: netfilter: Add missing return value netfilter: nf_tables: prevent nf_skb_duplicated corruption selftests: netfilter: Fix nft_audit.sh for newer nft binaries netfilter: uapi: NFTA_FLOWTABLE_HOOK is NLA_NESTED ==================== Link: https://patch.msgid.link/20241002202421.1281311-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-02selftests: rds: move include.sh to TEST_FILESHangbin Liu
The include.sh file is generated for inclusion and should not be executable. Otherwise, it will be added to kselftest-list.txt. Additionally, add the executable bit for test.py at the same time to ensure proper functionality. Fixes: 3ade6ce1255e ("selftests: rds: add testing infrastructure") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20240927041349.81216-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-02Merge tag 'pull-work.unaligned' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull generic unaligned.h cleanups from Al Viro: "Get rid of architecture-specific <asm/unaligned.h> includes, replacing them with a single generic <linux/unaligned.h> header file. It's the second largest (after asm/io.h) class of asm/* includes, and all but two architectures actually end up using exact same file. Massage the remaining two (arc and parisc) to do the same and just move the thing to from asm-generic/unaligned.h to linux/unaligned.h" [ This is one of those things that we're better off doing outside the merge window, and would only cause extra conflict noise if it was in linux-next for the next release due to all the trivial #include line updates. Rip off the band-aid. - Linus ] * tag 'pull-work.unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: move asm/unaligned.h to linux/unaligned.h arc: get rid of private asm/unaligned.h parisc: get rid of private asm/unaligned.h
2024-10-02move asm/unaligned.h to linux/unaligned.hAl Viro
asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-10-02perf cs-etm: Fix the assert() to handle captured and unprocessed cpu traceIlkka Koskinen
If one builds perf with DEBUG=1, captures data on multiple CPUs and finally runs 'perf report -C <cpu>' for only one of the cpus, assert() aborts the program. This happens because there are empty queues with format set. This patch changes the condition to abort only if a queue is not empty and if the format is unset. $ make -C tools/perf DEBUG=1 CORESIGHT=1 CSLIBS=/usr/lib CSINCLUDES=/usr/include install $ perf record -o kcore --kcore -e cs_etm/timestamp/k -s -C 0-1 dd if=/dev/zero of=/dev/null bs=1M count=1 $ perf report --input kcore/data --vmlinux=/home/ikoskine/projects/linux/vmlinux -C 1 Aborted (core dumped) Fixes: 57880a7966be510c ("perf: cs-etm: Allocate queues for all CPUs") Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linux.dev> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20240924233930.5193-1-ilkka@os.amperecomputing.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-10-02perf build: Fix build feature-dwarf_getlocations fail for old libdwYang Jihong
For libdw versions below 0.177, need to link libdl.a in addition to libbebl.a during static compilation, otherwise feature-dwarf_getlocations compilation will fail. Before: $ make LDFLAGS=-static BUILD: Doing 'make -j20' parallel build <SNIP> Makefile.config:483: Old libdw.h, finding variables at given 'perf probe' point will not work, install elfutils-devel/libdw-dev >= 0.157 <SNIP> $ cat ../build/feature/test-dwarf_getlocations.make.output /usr/bin/ld: /usr/lib/gcc/x86_64-linux-gnu/9/../../../x86_64-linux-gnu/libebl.a(eblclosebackend.o): in function `ebl_closebackend': (.text+0x20): undefined reference to `dlclose' collect2: error: ld returned 1 exit status After: $ make LDFLAGS=-static <SNIP> Auto-detecting system features: ... dwarf: [ on ] <SNIP> $ ./perf probe Usage: perf probe [<options>] 'PROBEDEF' ['PROBEDEF' ...] or: perf probe [<options>] --add 'PROBEDEF' [--add 'PROBEDEF' ...] or: perf probe [<options>] --del '[GROUP:]EVENT' ... or: perf probe --list [GROUP:]EVENT ... <SNIP> Fixes: 536661da6ea18fe6 ("perf: build: Only link libebl.a for old libdw") Reviewed-by: Leo Yan <leo.yan@arm.com> Signed-off-by: Yang Jihong <yangjihong@bytedance.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20240919013513.118527-3-yangjihong@bytedance.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-10-02perf build: Fix static compilation error when libdw is not installedYang Jihong
If libdw is not installed in build environment, the output of 'pkg-config --modversion libdw' is empty, causing LIBDW_VERSION_2 to be empty and the shell test will have the following error: /bin/sh: 1: test: -lt: unexpected operator Before: $ pkg-config --modversion libdw Package libdw was not found in the pkg-config search path. Perhaps you should add the directory containing `libdw.pc' to the PKG_CONFIG_PATH environment variable No package 'libdw' found $ make LDFLAGS=-static -j16 BUILD: Doing 'make -j20' parallel build <SNIP> Package libdw was not found in the pkg-config search path. Perhaps you should add the directory containing `libdw.pc' to the PKG_CONFIG_PATH environment variable No package 'libdw' found /bin/sh: 1: test: -lt: unexpected operator After: 1. libdw is not installed: $ pkg-config --modversion libdw Package libdw was not found in the pkg-config search path. Perhaps you should add the directory containing `libdw.pc' to the PKG_CONFIG_PATH environment variable No package 'libdw' found $ make LDFLAGS=-static -j16 BUILD: Doing 'make -j20' parallel build <SNIP> Package libdw was not found in the pkg-config search path. Perhaps you should add the directory containing `libdw.pc' to the PKG_CONFIG_PATH environment variable No package 'libdw' found Makefile.config:473: No libdw DWARF unwind found, Please install elfutils-devel/libdw-dev >= 0.158 and/or set LIBDW_DIR 2. libdw version is lower than 0.177 $ pkg-config --modversion libdw 0.176 $ make LDFLAGS=-static -j16 BUILD: Doing 'make -j20' parallel build <SNIP> Auto-detecting system features: ... dwarf: [ on ] <SNIP> INSTALL libsubcmd_headers INSTALL libapi_headers INSTALL libperf_headers INSTALL libsymbol_headers INSTALL libbpf_headers LINK perf 3. libdw version is higher than 0.177 $ pkg-config --modversion libdw 0.186 $ make LDFLAGS=-static -j16 BUILD: Doing 'make -j20' parallel build <SNIP> Auto-detecting system features: ... dwarf: [ on ] <SNIP> CC util/bpf-utils.o CC util/pfm.o LD util/perf-util-in.o LD perf-util-in.o AR libperf-util.a LINK perf Fixes: 536661da6ea18fe6 ("perf: build: Only link libebl.a for old libdw") Reviewed-by: Leo Yan <leo.yan@arm.com> Signed-off-by: Yang Jihong <yangjihong@bytedance.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20240919013513.118527-2-yangjihong@bytedance.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-10-02perf dwarf-aux: Fix build with !HAVE_DWARF_GETLOCATIONS_SUPPORTJames Clark
The linked fixes commit added an #include "dwarf-aux.h" to disasm.h which gets picked up in a lot of places. Without HAVE_DWARF_GETLOCATIONS_SUPPORT the stubs return an errno, so include errno.h to fix the following build error: In file included from util/disasm.h:8, from util/annotate.h:16, from builtin-top.c:23: util/dwarf-aux.h: In function 'die_get_var_range': util/dwarf-aux.h:183:10: error: 'ENOTSUP' undeclared (first use in this function) 183 | return -ENOTSUP; | ^~~~~~~ Fixes: 782959ac248ac3cb ("perf annotate: Add "update_insn_state" callback function to handle arch specific instruction tracking") Signed-off-by: James Clark <james.clark@linaro.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20241001123625.1063153-1-james.clark@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-10-02bpf: selftests: send packet to devmap redirect XDPFlorian Kauer
The current xdp_devmap_attach test attaches a program that redirects to another program via devmap. It is, however, never executed, so do that to catch any bugs that might occur during execution. Also, execute the same for a veth pair so that we also cover the non-generic path. Warning: Running this without the bugfix in this series will likely crash your system. Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20240911-devel-koalo-fix-ingress-ifindex-v4-2-5c643ae10258@linutronix.de Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-10-02selftests: breakpoints: use remaining time to check if suspend succeedYifei Liu
step_after_suspend_test fails with device busy error while writing to /sys/power/state to start suspend. The test believes it failed to enter suspend state with $ sudo ./step_after_suspend_test TAP version 13 Bail out! Failed to enter Suspend state However, in the kernel message, I indeed see the system get suspended and then wake up later. [611172.033108] PM: suspend entry (s2idle) [611172.044940] Filesystems sync: 0.006 seconds [611172.052254] Freezing user space processes [611172.059319] Freezing user space processes completed (elapsed 0.001 seconds) [611172.067920] OOM killer disabled. [611172.072465] Freezing remaining freezable tasks [611172.080332] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [611172.089724] printk: Suspending console(s) (use no_console_suspend to debug) [611172.117126] serial 00:03: disabled some other hardware get reconnected [611203.136277] OOM killer enabled. [611203.140637] Restarting tasks ... [611203.141135] usb 1-8.1: USB disconnect, device number 7 [611203.141755] done. [611203.155268] random: crng reseeded on system resumption [611203.162059] PM: suspend exit After investigation, I noticed that for the code block if (write(power_state_fd, "mem", strlen("mem")) != strlen("mem")) ksft_exit_fail_msg("Failed to enter Suspend state\n"); The write will return -1 and errno is set to 16 (device busy). It should be caused by the write function is not successfully returned before the system suspend and the return value get messed when waking up. As a result, It may be better to check the time passed of those few instructions to determine whether the suspend is executed correctly for it is pretty hard to execute those few lines for 5 seconds. The timer to wake up the system is set to expire after 5 seconds and no re-arm. If the timer remaining time is 0 second and 0 nano secomd, it means the timer expired and wake the system up. Otherwise, the system could be considered to enter the suspend state failed if there is any remaining time. After appling this patch, the test would not fail for it believes the system does not go to suspend by mistake. It now could continue to the rest part of the test after suspend. Fixes: bfd092b8c272 ("selftests: breakpoint: add step_after_suspend_test") Reported-by: Sinadin Shan <sinadin.shan@oracle.com> Signed-off-by: Yifei Liu <yifei.l.liu@oracle.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-10-02kselftest/devices/probe: Fix SyntaxWarning in regex strings for Python3Alessandro Zanni
Insert raw strings to prevent Python3 from interpreting string literals as Unicode strings and "\d" as invalid escaped sequence. Fix the warnings: tools/testing/selftests/devices/probe/test_discoverable_devices.py:48: SyntaxWarning: invalid escape sequence '\d' usb_controller_sysfs_dir = "usb[\d]+" tools/testing/selftests/devices/probe/test_discoverable_devices.py: 94: SyntaxWarning: invalid escape sequence '\d' re_usb_version = re.compile("PRODUCT=.*/(\d)/.*") Fixes: dacf1d7a78bf ("kselftest: Add test to verify probe of devices from discoverable buses") Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-10-02Merge tag 'asoc-fix-v6.12-rc1' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.12 A bunch of fixes here that came in during the merge window and the first week of release, plus some new quirks and device IDs. There's nothing major here, it's a bit bigger than it might've been due to there being no fixes sent during the merge window due to your vacation.
2024-10-02tools headers arm64: Sync arm64's cputype.h with the kernel sourcesArnaldo Carvalho de Melo
To get the changes in: db0d8a84348b876d ("arm64: errata: Enable the AC03_CPU_38 workaround for ampere1a") That makes this perf source code to be rebuilt: CC /tmp/build/perf-tools/util/arm-spe.o The changes in the above patch add MIDR_AMPERE1A, used in arm-spe.c, so probably we need to add it to that array? Or maybe we need to leave this for later when this is all tested on those machines? static const struct midr_range neoverse_spe[] = { MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N1), MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2), MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V1), {}, }; Mark Rutland recommended about arm-spe.c in a previous update to this file: "I would not touch this for now -- someone would have to go audit the TRMs to check that those other cores have the same encoding, and I think it'd be better to do that as a follow-up." That addresses this perf build warning: Warning: Kernel ABI header differences: diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: D Scott Phillips <scott@os.amperecomputing.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/lkml/ZvtFu7J-Awy2zuEJ@x1 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-10-02perf tools: Cope with differences for lib/list_sort.c copy from the kernelArnaldo Carvalho de Melo
With 6d74e1e371d43a7b ("tools/lib/list_sort: remove redundant code for cond_resched handling") we need to use the newly added hunk based exceptions when comparing the copy we carry in tools/lib/ to the original file, do it by adding the hunks that we know will be the expected diff. If at some point the original file is updated in other parts, then we should flag and check the file for update. Acked-by: Kuan-Wei Chiu <visitorckw@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/lkml/20240930202136.16904-3-acme@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-10-02tools check_headers.sh: Add check variant that excludes some hunksArnaldo Carvalho de Melo
With 6d74e1e371d43a7b ("tools/lib/list_sort: remove redundant code for cond_resched handling") we end up with a multi-line variation in the merge_final() implementation, one that the simple line based exceptions we had so far can't cope. Thus this check has been failing: Warning: Kernel ABI header differences: diff -u tools/lib/list_sort.c lib/list_sort.c So add a new check routine that uses grep -vf to exclude some hunks that we store in the tools/perf/check-header_ignore_hunks/ directory. This first patch is just the new check routine, the next one will use it to check lib/list_sort.c. Acked-by: Kuan-Wei Chiu <visitorckw@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/lkml/20240930202136.16904-2-acme@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-10-02sched_ext: Add __weak markers to BPF helper function decalarationsVishal Chourasia
Fix build errors by adding __weak markers to BPF helper function declarations in header files. This resolves static assertion failures in scx_qmap.bpf.c and scx_flatcg.bpf.c where functions like scx_bpf_dispatch_from_dsq_set_slice, scx_bpf_dispatch_from_dsq_set_vtime, and scx_bpf_task_cgroup were missing the __weak attribute. [1] https://lore.kernel.org/all/ZvvfUqRNM4-jYQzH@linux.ibm.com Signed-off-by: Vishal Chourasia <vishalc@linux.ibm.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2024-10-01bpf: Sync uapi bpf.h header to tools directoryDaniel Borkmann
There is a delta between kernel UAPI bpf.h and tools UAPI bpf.h, thus sync them again. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2024-10-01selftests/bpf: Verify that sync_linked_regs preserves subreg_defEduard Zingerman
This test was added because of a bug in verifier.c:sync_linked_regs(), upon range propagation it destroyed subreg_def marks for registers. The test is written in a way to return an upper half of a register that is affected by range propagation and must have it's subreg_def preserved. This gives a return value of 0 and leads to undefined return value if subreg_def mark is not preserved. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20240924210844.1758441-2-eddyz87@gmail.com
2024-10-01KVM: selftests: Fix build on architectures other than x86_64Mark Brown
The recent addition of support for testing with the x86 specific quirk KVM_X86_QUIRK_SLOT_ZAP_ALL disabled in the generic memslot tests broke the build of the KVM selftests for all other architectures: In file included from include/kvm_util.h:8, from include/memstress.h:13, from memslot_modification_stress_test.c:21: memslot_modification_stress_test.c: In function ‘main’: memslot_modification_stress_test.c:176:38: error: ‘KVM_X86_QUIRK_SLOT_ZAP_ALL’ undeclared (first use in this function) 176 | KVM_X86_QUIRK_SLOT_ZAP_ALL); | ^~~~~~~~~~~~~~~~~~~~~~~~~~ Add __x86_64__ guard defines to avoid building the relevant code on other architectures. Fixes: 61de4c34b51c ("KVM: selftests: Test memslot move in memslot_perf_test with quirk disabled") Fixes: 218f6415004a ("KVM: selftests: Allow slot modification stress test with quirk disabled") Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Message-ID: <20240930-kvm-build-breakage-v1-1-866fad3cc164@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-10-01selftest: hid: add missing run-hid-tools-tests.shYun Lu
HID test cases run tests using the run-hid-tools-tests.sh script. When installed with "make install", the run-hid-tools-tests.sh script will not be copied over, resulting in the following error message. make -C tools/testing/selftests/ TARGETS=hid install \ INSTALL_PATH=$KSFT_INSTALL_PATH cd $KSFT_INSTALL_PATH ./run_kselftest.sh -c hid selftests: hid: hid-core.sh bash: ./run-hid-tools-tests.sh: No such file or directory Add the run-hid-tools-tests.sh script to the TEST_FILES in the Makefile for it to be installed. Fixes: ffb85d5c9e80 ("selftests: hid: import hid-tools hid-core tests") Signed-off-by: Yun Lu <luyun@kylinos.cn> Acked-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-10-01selftests: vDSO: align getrandom states to cache lineJason A. Donenfeld
This prevents false sharing, which makes a large difference on machines with several NUMA nodes, such as on a dual socket Intel(R) Xeon(R) Gold 6338 CPU @ 2.00GHz, where the "bench-multi" test goes from 2.7s down to 1.9s. While this is just test code, it also forms the basis of how folks will wind up implementing this in libraries, so we should implement this simple cache alignment improvement here. Suggested-by: Florian Weimer <fweimer@redhat.com> Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-09-30perf beauty: Update copy of linux/socket.h with the kernel sourcesArnaldo Carvalho de Melo
To pick the changes in: 8f0b3cc9a4c102c2 ("tcp: RX path for devmem TCP") That don't result in any changes in the tables generated from that header. But while updating I noticed we need to support the new MSG_SOCK_DEVMEM flag in the hard coded table for the msg flags table, add it. This silences this perf build warning: Warning: Kernel ABI header differences: diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h Please see tools/include/uapi/README for details. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/ZvrO_eT9e_41xrNv@x1 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-30tools headers UAPI: Sync the linux/in.h with the kernel sourcesArnaldo Carvalho de Melo
Picking the changes from: 70d0bb45fae87a3b ("net: Correct spelling in headers") Just a comment fix, addressing this perf build warning: Warning: Kernel ABI header differences: diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h Please see tools/include/uapi/README for details. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/lkml/ZvrNlLdtXAZ1sIIj@x1 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-30perf trace beauty: Update the arch/x86/include/asm/irq_vectors.h copy with ↵Arnaldo Carvalho de Melo
the kernel sources To pick up the change in: a1fab3e69d9d0e9b ("x86/irq: Fix comment on IRQ vector layout") That just adds some comments, so no changes in perf tooling, just silences this build warning: diff -u tools/perf/trace/beauty/arch/x86/include/asm/irq_vectors.h arch/x86/include/asm/irq_vectors.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Sohil Mehta <sohil.mehta@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/lkml/ZvrKT7oQc1AOv6Vk@x1 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-30tools arch x86: Sync the msr-index.h copy with the kernel sourcesArnaldo Carvalho de Melo
To pick up the changes from these csets: 0a3e4e94d137daac ("platform/x86/intel/ifs: Add SBAF test image loading support") That cause no changes to tooling: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after $ Just silences this perf build warning: Warning: Kernel ABI header differences: diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jithu Joseph <jithu.joseph@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/ZvrJY68Btx3a_yV4@x1 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-30tools include UAPI: Sync linux/fcntl.h copy with the kernel sourcesArnaldo Carvalho de Melo
Picking the changes from: 4356d575ef0f39a3 ("fhandle: expose u64 mount id to name_to_handle_at(2)") b4fef22c2fb97fa2 ("uapi: explain how per-syscall AT_* flags should be allocated") 820a185896b77814 ("fcntl: add F_CREATED_QUERY") It just moves AT_REMOVEDIR around, and adds a bunch more AT_ for renameat2() and name_to_handle_at(). We need to improve this situation, as not all AT_ defines are applicable to all fs flags... This adds support for those new AT_ defines, addressing this build warning: diff -u tools/perf/trace/beauty/include/uapi/sound/asound.h include/uapi/sound/asound.h Reviewed-by: Aleksa Sarai <cyphar@cyphar.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/lkml/ZvrIKL3cREoRHIQd@x1 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-30Merge tag 'sched_ext-for-6.12-rc1-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext Pull sched_ext fixes from Tejun Heo: - When sched_ext is in bypass mode (e.g. while disabling the BPF scheduler), it was using one DSQ to implement global FIFO scheduling as all it has to do is guaranteeing reasonable forward progress. On multi-socket machines, this can lead to live-lock conditions under certain workloads. Fixed by splitting the queue used for FIFO scheduling per NUMA node. This required several preparation patches. - Hotplug tests on powerpc could reliably trigger deadlock while enabling a BPF scheduler. This was caused by cpu_hotplug_lock nesting inside scx_fork_rwsem and then CPU hotplug path trying to fork a new thread while holding cpu_hotplug_lock. Fixed by restructuring locking in enable and disable paths so that the two locks are not coupled. This required several preparation patches which also fixed a couple other issues in the enable path. - A build fix for !CONFIG_SMP - Userspace tooling sync and updates * tag 'sched_ext-for-6.12-rc1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: sched_ext: Remove redundant p->nr_cpus_allowed checker sched_ext: Decouple locks in scx_ops_enable() sched_ext: Decouple locks in scx_ops_disable_workfn() sched_ext: Add scx_cgroup_enabled to gate cgroup operations and fix scx_tg_online() sched_ext: Enable scx_ops_init_task() separately sched_ext: Fix SCX_TASK_INIT -> SCX_TASK_READY transitions in scx_ops_enable() sched_ext: Initialize in bypass mode sched_ext: Remove SCX_OPS_PREPPING sched_ext: Relocate check_hotplug_seq() call in scx_ops_enable() sched_ext: Use shorter slice while bypassing sched_ext: Split the global DSQ per NUMA node sched_ext: Relocate find_user_dsq() sched_ext: Allow only user DSQs for scx_bpf_consume(), scx_bpf_dsq_nr_queued() and bpf_iter_scx_dsq_new() scx_flatcg: Use a user DSQ for fallback instead of SCX_DSQ_GLOBAL tools/sched_ext: Receive misc updates from SCX repo sched_ext: Add __COMPAT helpers for features added during v6.12 devel cycle sched_ext: Build fix for !CONFIG_SMP
2024-09-30selftests: exec: update gitignore for load_addressJavier Carrasco
The name of the "load_address" objects has been modified, but the corresponding entry in the gitignore file must be updated. Update the load_address entry in the gitignore file to account for the new names, adding an exception to keep on tracking load_address.c. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-09-30selftests: core: add unshare_test to gitignoreJavier Carrasco
This executable is missing from the corresponding gitignore file. Add unshare_test to the core gitignore list. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-09-30clone3: clone3_cap_checkpoint_restore: remove unused MAX_PID_NS_LEVEL macroBa Jing
The macro MAX_PID_NS_LEVEL is never referenced in the code, so remove it. Signed-off-by: Ba Jing <bajing@cmss.chinamobile.com> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-09-30selftests:timers: posix_timers: Fix warn_unused_result in __fatal_error()Shuah Khan
__fatal_error routine doesn't check strerror_r() return value, which results in the following compile time warning: posix_timers.c: In function ‘__fatal_error’: posix_timers.c:31:9: warning: ignoring return value of ‘strerror_r’ declared with attribute ‘warn_unused_result’ [-Wunused-result] 31 | strerror_r(errno, buf, sizeof(buf)); Fix this by adding a check for return value and error handling appropriate for the GNU-specific strerror_r() in use in __fatal_error(). Check if return string is null and handle accordingly. From Linux strerror_r() manual page: "The GNU-specific strerror_r() returns a pointer to a string containing the error message. This may be either a pointer to a string that the function stores in buf, or a pointer to some (immutable) static string (in which case buf is unused). If the function stores a string in buf, then at most buflen bytes are stored (the string may be truncated if buflen is too small and errnum is unknown). The string always includes a terminating null byte." Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: John Stultz <jstultz@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-09-30selftest: rtc: Check if could access /dev/rtc0 before testingJoseph Jang
The rtctest requires the read permission on /dev/rtc0. The rtctest will be skipped if the /dev/rtc0 is not readable. Reviewed-by: Koba Ko <kobak@nvidia.com> Reviewed-by: Matthew R. Ochs <mochs@nvidia.com> Signed-off-by: Joseph Jang <jjang@nvidia.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-09-30tools include UAPI: Sync linux/sched.h copy with the kernel sourcesArnaldo Carvalho de Melo
Picking the changes from: f0e1a0643a59bf1f ("sched_ext: Implement BPF extensible scheduler class") The inclusion of the SCHED_EXT define doesn't cause any change in behaviour in tools/perf. This just silences this perf tools build warning: diff -u tools/perf/trace/beauty/include/uapi/sound/asound.h include/uapi/sound/asound.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/lkml/ZvrDShNVXotZpiwk@x1 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-30tools include UAPI: Sync sound/asound.h copy with the kernel sourcesArnaldo Carvalho de Melo
Picking the changes from: 37745918e0e7575b ("ALSA: timer: Introduce virtual userspace-driven timers") Which entails no changes in the tooling side as it only introduces new SNDRV_TIMER_IOCTL_ ioctls, and the ones tracked by scripts in tools/perf/trace/beauty/ are only SNDRV_PCM_IOCTL_ and SNDRV_CTL_IOCTL_, we still need to support SNDRV_TIMER_IOCTL_ ones, but that probably will be one of the first for a BTF enumeration based approach :-) This silences this perf tools build warning: diff -u tools/perf/trace/beauty/include/uapi/sound/asound.h include/uapi/sound/asound.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ivan Orlov <ivan.orlov0322@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/lkml/ZvrB-g_E7g2ArlYW@x1 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-30selftest: alsa: check if user has alsa installedAbdul Rahim
Currently, if alsa development package is not installed on the user's system then the make command would print a `pagefull` of errors. In particular one error message is repeated 3 times. This error is returned by `pkg-config` and since it is not being handeled appropriately, repeated calls to `pkg-config` prints the same message again. This patch adds check for alsa package installation. If alsa is not installed, a short and consize error is returned. Also, it does not affect the compilation of other tests. Signed-off-by: Abdul Rahim <abdul.rahim@myyahoo.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://patch.msgid.link/20240922225824.18918-1-abdul.rahim@myyahoo.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-07-31 10:42:35 +0000