| Age | Commit message (Collapse) | Author |
|---|
|
Drivers report a string with a name for each PCM, log it during startup of
pcm-test as a diagnostic aid.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20240716-alsa-kselftest-board-name-v2-2-60f1acdde096@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Currently for the PCM and mixer tests we report test names which identify
the card being tested with the card number. This ensures we have unique
names but since card numbers are dynamically assigned at runtime the names
we end up with will often not be stable on systems with multiple cards
especially where those cards are provided by separate modules loeaded at
runtime. This makes it difficult for automated systems and UIs to relate
test results between runs on affected platforms.
Address this by replacing our use of card numbers with card names which are
more likely to be stable across runs. We use the card ID since it is
guaranteed to be unique by default, unlike the long name. There is still
some vulnerability to ordering issues if multiple cards with the same base
ID are present in the system but have separate dependencies but not all
drivers put distinguishing information in their long names.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20240716-alsa-kselftest-board-name-v2-1-60f1acdde096@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for net:
1) Call nf_expect_get_id() to delete expectation by ID. By trial and
error it is possible to leak the LSB of the expectation address on
x86_64. This bug is a leftover when converting the existing code
to use nf_expect_get_id().
2) Incorrect initialization in pipapo set backend leads to packet
mismatches. From Florian Westphal.
3) Extend netfilter's selftests to cover for the pipapo set backend,
also from Florian.
4) Fix sparse warning in IPVS when adding service, from Chen Hanxiao.
netfilter pull request 24-07-17
* tag 'nf-24-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
ipvs: properly dereference pe in ip_vs_add_service
selftests: netfilter: add test case for recent mismatch bug
netfilter: nf_set_pipapo: fix initial map fill
netfilter: ctnetlink: use helper function to calculate expect ID
====================
Link: https://patch.msgid.link/20240717215214.225394-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The TOS value that is returned to user space in the route get reply is
the one with which the lookup was performed ('fl4->flowi4_tos'). This is
fine when the matched route is configured with a TOS as it would not
match if its TOS value did not match the one with which the lookup was
performed.
However, matching on TOS is only performed when the route's TOS is not
zero. It is therefore possible to have the kernel incorrectly return a
non-zero TOS:
# ip link add name dummy1 up type dummy
# ip address add 192.0.2.1/24 dev dummy1
# ip route get fibmatch 192.0.2.2 tos 0xfc
192.0.2.0/24 tos 0x1c dev dummy1 proto kernel scope link src 192.0.2.1
Fix by instead returning the DSCP field from the FIB result structure
which was populated during the route lookup.
Output after the patch:
# ip link add name dummy1 up type dummy
# ip address add 192.0.2.1/24 dev dummy1
# ip route get fibmatch 192.0.2.2 tos 0xfc
192.0.2.0/24 dev dummy1 proto kernel scope link src 192.0.2.1
Extend the existing selftests to not only verify that the correct route
is returned, but that it is also returned with correct "tos" value (or
without it).
Fixes: b61798130f1b ("net: ipv4: RTM_GETROUTE: return matched fib result when requested")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Benjamin Tissoires:
- rewrite of the HID-BPF internal implementation to use bpf struct_ops
instead of a tracing endpoint (Benjamin Tissoires)
- add two new HID-BPF hooks to be able to intercept userspace calls
targeting a HID device and filtering them (Benjamin Tissoires)
- add support for various new devices through HID-BPF filters (Benjamin
Tissoires)
- add support for the magic keyboard backlight (Orlando Chamberlain)
- add the missing MODULE_DESCRIPTION() macros in HID drivers (Jeff
Johnson)
- use of kvzalloc in case memory gets too fragmented (Hailong Liu)
- retrieve the device firmware node in the child HID device (Danny
Kaehn)
- some hid-uclogic improvements (José Expósito)
- some more typos, trivial fixes, kernel doctext and unused functions
cleanups
* tag 'for-linus-2024071601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (60 commits)
HID: hid-steam: Fix typo in goto label
HID: mcp2221: Remove unnecessary semicolon
HID: Fix spelling mistakes "Kensigton" -> "Kensington"
HID: add more missing MODULE_DESCRIPTION() macros
HID: samples: fix the 2 struct_ops definitions
HID: fix for amples in for-6.11/bpf
HID: apple: Add support for magic keyboard backlight on T2 Macs
HID: bpf: Thrustmaster TCA Yoke Boeing joystick fix
HID: bpf: Add Huion Dial 2 bpf fixup
HID: bpf: Add support for the XP-PEN Deco Mini 4
HID: bpf: move the BIT() macro to hid_bpf_helpers.h
HID: bpf: add a driver for the Huion Inspiroy 2S (H641P)
HID: bpf: Add a HID report composition helper macros
HID: bpf: doc fixes for hid_hw_request() hooks
HID: bpf: doc fixes for hid_hw_request() hooks
HID: bpf: fix gcc warning and unify __u64 into u64
selftests/hid: ensure CKI can compile our new tests on old kernels
selftests/hid: add an infinite loop test for hid_bpf_try_input_report
selftests/hid: add another test for injecting an event from an event hook
HID: bpf: allow hid_device_event hooks to inject input reports on self
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- amd/pmf: Report system state changes using existing input events
- asus-wmi: Zenbook 2023 camera LED disable support and fix TUF laptop
keyboard RGB LED sysfs interface
- dell-pc: Fan modes / platform profile support
- hp-wmi: Fix platform profile switching on Omen/Victus laptops
- intel/ISST: Use only TPMI interface when TPMI and legacy interfaces
are available
- intel/pmc: LTR restore support to pair with LTR ignore
- intel/tpmi: Performance Limit Reasons (PLR) and APIC <-> Punit CPU
numbering mapping support
- WMI: driver override support and docs improvements
- lenovo-yoga-c630: Support for EC (platform/arm64)
- platform/arm64: Fix build with COMPILE_TEST (broke after addition of
C630)
- tools: Intel Speed Select Turbo Ratio Limit fix
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits)
platform/x86: asus-wmi: fix TUF laptop RGB variant
platform/x86/intel/tpmi/plr: Fix output in plr_print_bits()
Docs/admin-guide: Remove pmf leftover reference from the index
platform/x86: ideapad-laptop: use cleanup.h
platform/x86: hp-wmi: Fix implementation of the platform_profile_omen_get function
platform: arm64: EC_LENOVO_YOGA_C630 should depend on ARCH_QCOM
platform: arm64: EC_ACER_ASPIRE1 should depend on ARCH_QCOM
platform/x86/amd/pmf: Remove update system state document
platform/x86/amd/pmf: Use existing input event codes to update system states
platform/x86: hp-wmi: Fix platform profile option switch bug on Omen and Victus laptops
platform/x86:intel/pmc: Add support to undo ltr_ignore
platform/x86:intel/pmc: Use the Elvis operator
platform/x86:intel/pmc: Use DEFINE_SHOW_STORE_ATTRIBUTE macro
platform/x86:intel/pmc: Remove unneeded min_t check
platform/x86:intel/pmc: Add support to show ltr_ignore value
platform/x86:intel/pmc: Move pmc assignment closer to first usage
platform/x86:intel/pmc: Convert index variables to be unsigned
platform/x86:intel/pmc: Simplify mutex usage with cleanup helpers
platform/x86:intel/pmc: Use the return value of pmc_core_send_msg
tools/power/x86/intel-speed-select: v1.20 release
...
|
|
Verify that out-of-band packets are silently dropped before they reach the
redirection logic.
The idea is to test with a 2 byte long send(). Should a MSG_OOB flag be in
use, only the last byte will be treated as out-of-band. Test fails if
verd_mapfd indicates a wrong number of packets processed (e.g. if OOB
wasn't dropped at the source) or if it was possible to recv() MSG_OOB from
the mapped socket, or if any stale OOB data have been left reachable from
the unmapped socket.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20240713200218.2140950-5-mhal@rbox.co
|
|
Extend pairs_redir_to_connected() and unix_inet_redir_to_connected() with a
send_flags parameter. Replace write() with send() allowing packets to be
sent as MSG_OOB.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20240713200218.2140950-4-mhal@rbox.co
|
|
Function ignores the AF_UNIX socket type argument, SOCK_DGRAM is hardcoded.
Fix to respect the argument provided.
Fixes: 75e0e27db6cf ("selftest/bpf: Change udp to inet in some function names")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20240713200218.2140950-3-mhal@rbox.co
|
|
The usage help for "bpftool prog help" contains a ° instead of the _
symbol for cgroup/sendmsg_unix. Fix the typo.
Fixes: 8b3cba987e6d ("bpftool: Add support for cgroup unix socket address hooks")
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20240717134508.77488-1-donald.hunter@gmail.com
|
|
For all these years libbpf's BTF dumper has been emitting not strictly
valid syntax for function prototypes that have no input arguments.
Instead of `int (*blah)()` we should emit `int (*blah)(void)`.
This is not normally a problem, but it manifests when we get kfuncs in
vmlinux.h that have no input arguments. Due to compiler internal
specifics, we get no BTF information for such kfuncs, if they are not
declared with proper `(void)`.
The fix is trivial. We also need to adjust a few ancient tests that
happily assumed `()` is correct.
Fixes: 351131b51c7a ("libbpf: add btf_dump API for BTF-to-C conversion")
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/bpf/20240712224442.282823-1-andrii@kernel.org
|
|
Now that symsrc_filename is always accessed through an accessor, we also
need a free() function for it to avoid the following compilation error:
util/unwind-libunwind-local.c:416:12: error: lvalue required as unary
‘&’ operand
416 | zfree(&dso__symsrc_filename(dso));
Fixes: 1553419c3c10 ("perf dso: Fix address sanitizer build")
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20240715094715.3914813-1-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
This allows to build against libtraceevent and libtracefs installed
in non-standard locations.
Signed-off-by: Guilherme Amadio <amadio@gentoo.org>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Tested-by: Leo Yan <leo.yan@arm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20240717174739.186988-6-amadio@gentoo.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
This allows to build against libtraceevent and libtracefs installed
in non-standard locations.
Signed-off-by: Guilherme Amadio <amadio@gentoo.org>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Tested-by: Leo Yan <leo.yan@arm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20240712194511.3973899-5-amadio@gentoo.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
This allows to build against libtraceevent and libtracefs installed
in non-standard locations.
Signed-off-by: Guilherme Amadio <amadio@gentoo.org>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Tested-by: Leo Yan <leo.yan@arm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20240712194511.3973899-4-amadio@gentoo.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Other tools, in tools/verification and tools/tracing, make use of
libtraceevent and libtracefs as dependencies. This allows setting
up the feature check flags for them as well.
Signed-off-by: Guilherme Amadio <amadio@gentoo.org>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Tested-by: Leo Yan <leo.yan@arm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20240717174739.186988-3-amadio@gentoo.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Signed-off-by: Guilherme Amadio <amadio@gentoo.org>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Tested-by: Leo Yan <leo.yan@arm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20240717174739.186988-2-amadio@gentoo.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
On ARM64 the stack pointer should be aligned at a 16 byte boundary or
the SPAlignmentFault can occur. The fexit_sleep selftest allocates the
stack for the child process as a character array, this is not guaranteed
to be aligned at 16 bytes.
Because of the SPAlignmentFault, the child process is killed before it
can do the nanosleep call and hence fentry_cnt remains as 0. This causes
the main thread to hang on the following line:
while (READ_ONCE(fexit_skel->bss->fentry_cnt) != 2);
Fix this by allocating the stack using mmap() as described in the
example in the man page of clone().
Remove the fexit_sleep test from the DENYLIST of arm64.
Fixes: eddbe8e65214 ("selftest/bpf: Add a test to check trampoline freeing logic.")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240715173327.8657-1-puranjay@kernel.org
|
|
Without 'netfilter: nf_set_pipapo: fix initial map fill' this fails:
TEST: reported issues
Add two elements, flush, re-add 1s [ OK ]
net,mac with reload 1s [ OK ]
net,port,proto 1s [FAIL]
post-add: should have returned 10.5.8.0/24 . 51-60 . 6-17 but got table inet filter {
set test {
type ipv4_addr . inet_service . inet_proto
flags interval,timeout
elements = { 10.5.7.0/24 . 51-60 . 6-17 }
}
}
The other sets defined in the selftest do not trigger this bug, it only
occurs if the first field group bitsize is smaller than the largest
group bitsize.
For each added element, check 'get' works and actually returns the
requested range.
After map has been filled, check all added ranges can still be
retrieved.
For each deleted element, check that 'get' fails.
Based on a reproducer script from Yi Chen.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- change resctrl test to cleanup resctrl_val() and generalize it by
removing test name specific handling from the function.
- several clang build failure fixes to framework and tests
- add tests to verify IFS (In Field Scan) driver functionality
- cleanups to remove unused variables and document changes
* tag 'linux_kselftest-next-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (33 commits)
selftests: ifs: verify IFS ARRAY BIST functionality
selftests: ifs: verify IFS scan test functionality
selftests: ifs: verify test image loading functionality
selftests: ifs: verify test interfaces are created by the driver
selftests/dma:remove unused variable
selftests/breakpoints:Remove unused variable
selftests/x86: fix printk warnings reported by clang
selftests/x86: remove (or use) unused variables and functions
selftests/x86: avoid -no-pie warnings from clang during compilation
selftests/x86: build sysret_rip.c with clang
selftests/x86: build fsgsbase_restore.c with clang
selftests: x86: test_FISTTP: use fisttps instead of ambiguous fisttp
selftests/x86: fix Makefile dependencies to work with clang
selftests/timers: remove unused irqcount variable
selftests: Add information about TAP conformance in tests
selftests/resctrl: Remove test name comparing from write_bm_pid_to_resctrl()
selftests/resctrl: Remove mongrp from CMT test
selftests/resctrl: Remove mongrp from MBA test
selftests/resctrl: Convert ctrlgrp & mongrp to pointers
selftests/resctrl: Make some strings passed to resctrlfs functions const
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Fix bug that caused objtool to confuse certain memory ops added by
KASAN instrumentation as stack accesses
- Various faddr2line optimizations
- Improve error messages
* tag 'objtool-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool/x86: objtool can confuse memory and stack access
objtool: Use "action" in error message to be consistent with help
scripts/faddr2line: Check only two symbols when calculating symbol size
scripts/faddr2line: Remove call to addr2line from find_dir_prefix()
scripts/faddr2line: Invoke addr2line as a single long-running process
scripts/faddr2line: Pass --addresses argument to addr2line
scripts/faddr2line: Check vmlinux only once
scripts/faddr2line: Combine three readelf calls into one
scripts/faddr2line: Reduce number of readelf calls to three
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add a new cpufreq driver for Loongson-3, add support for new
features in the intel_pstate (Lunar Lake and Arrow Lake platforms, OOB
mode for Emerald Rapids, highest performance change interrupt),
amd-pstate (fast CPPC) and sun50i (Allwinner H700 speed bin) cpufreq
drivers, simplify the cpufreq driver interface, simplify the teo
cpuidle governor, adjust the pm-graph utility for a new version of
Python, address issues and clean up code.
Specifics:
- Add Loongson-3 CPUFreq driver support (Huacai Chen)
- Add support for the Arrow Lake and Lunar Lake platforms and the
out-of-band (OOB) mode on Emerald Rapids to the intel_pstate
cpufreq driver, make it support the highest performance change
interrupt and clean it up (Srinivas Pandruvada)
- Switch cpufreq to new Intel CPU model defines (Tony Luck)
- Simplify the cpufreq driver interface by switching the .exit()
driver callback to the void return data type (Lizhe, Viresh Kumar)
- Make cpufreq_boost_enabled() return bool (Dhruva Gole)
- Add fast CPPC support to the amd-pstate cpufreq driver, address
multiple assorted issues in it and clean it up (Perry Yuan, Mario
Limonciello, Dhananjay Ugwekar, Meng Li, Xiaojian Du)
- Add Allwinner H700 speed bin to the sun50i cpufreq driver (Ryan
Walklin)
- Fix memory leaks and of_node_put() usage in the sun50i and
qcom-nvmem cpufreq drivers (Javier Carrasco)
- Clean up the sti and dt-platdev cpufreq drivers (Jeff Johnson,
Raphael Gallais-Pou)
- Fix deferred probe handling in the TI cpufreq driver and wrong
return values of ti_opp_supply_probe(), and add OPP tables for the
AM62Ax and AM62Px SoCs to it (Bryan Brattlof, Primoz Fiser)
- Avoid overflow of target_freq in .fast_switch() in the SCMI cpufreq
driver (Jagadeesh Kona)
- Use dev_err_probe() in every error path in probe in the Mediatek
cpufreq driver (Nícolas Prado)
- Fix kernel-doc param for longhaul_setstate in the longhaul cpufreq
driver (Yang Li)
- Fix system resume handling in the CPPC cpufreq driver (Riwen Lu)
- Improve the teo cpuidle governor and clean up leftover comments
from the menu cpuidle governor (Christian Loehle)
- Clean up a comment typo in the teo cpuidle governor (Atul Kumar
Pant)
- Add missing MODULE_DESCRIPTION() macro to cpuidle haltpoll (Jeff
Johnson)
- Switch the intel_idle driver to new Intel CPU model defines (Tony
Luck)
- Switch the Intel RAPL driver new Intel CPU model defines (Tony
Luck)
- Simplify if condition in the idle_inject driver (Thorsten Blum)
- Fix missing cleanup on error in _opp_attach_genpd() (Viresh Kumar)
- Introduce an OF helper function to inform if required-opps is used
and drop a redundant in-parameter to _set_opp_level() (Ulf Hansson)
- Update pm-graph to v5.12 which includes fixes and major code revamp
for python3.12 (Todd Brandt)
- Address several assorted issues in the cpupower utility (Roman
Storozhenko)"
* tag 'pm-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (77 commits)
cpufreq: sti: fix build warning
cpufreq: mediatek: Use dev_err_probe in every error path in probe
cpufreq: Add Loongson-3 CPUFreq driver support
cpufreq: Make cpufreq_driver->exit() return void
cpufreq/amd-pstate: Fix the scaling_max_freq setting on shared memory CPPC systems
cpufreq/amd-pstate-ut: Convert nominal_freq to khz during comparisons
cpufreq: pcc: Remove empty exit() callback
cpufreq: loongson2: Remove empty exit() callback
cpufreq: nforce2: Remove empty exit() callback
cpupower: fix lib default installation path
cpufreq: docs: Add missing scaling_available_frequencies description
cpuidle: teo: Don't count non-existent intercepts
cpupower: Disable direct build of the 'bench' subproject
cpuidle: teo: Remove recent intercepts metric
Revert: "cpuidle: teo: Introduce util-awareness"
cpufreq: make cpufreq_boost_enabled() return bool
cpufreq: intel_pstate: Support highest performance change interrupt
x86/cpufeatures: Add HWP highest perf change feature flag
Documentation: cpufreq: amd-pstate: update doc for Per CPU boost control method
cpufreq: amd-pstate: Cap the CPPC.max_perf to nominal_perf if CPB is off
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- lkdtm/bugs: add test for hung smp_call_function_single() (Mark
Rutland)
- gcc-plugins: Remove duplicate included header file stringpool.h
(Thorsten Blum)
- ARM: Remove address checking for MMUless devices (Yanjun Yang)
- randomize_kstack: Clean up per-arch entropy and codegen
- KCFI: Make FineIBT mode Kconfig selectable
- fortify: Do not special-case 0-sized destinations
* tag 'hardening-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
randomize_kstack: Improve stack alignment codegen
ARM: Remove address checking for MMUless devices
gcc-plugins: Remove duplicate included header file stringpool.h
randomize_kstack: Remove non-functional per-arch entropy filtering
fortify: Do not special-case 0-sized destinations
x86/alternatives: Make FineIBT mode Kconfig selectable
lkdtm/bugs: add test for hung smp_call_function_single()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
- interrupt SECCOMP_IOCTL_NOTIF_RECV when all users exit (Andrei Vagin)
- Update selftests to check for expected NOTIF_RECV exits (Andrei
Vagin)
* tag 'seccomp-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: check that a zombie leader doesn't affect others
selftests/seccomp: add test for NOTIF_RECV and unused filters
seccomp: release task filters when the task exits
seccomp: interrupt SECCOMP_IOCTL_NOTIF_RECV when all users have exited
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
- Use value of kernel.randomize_va_space once per exec (Alexey
Dobriyan)
- Honor PT_LOAD alignment for static PIE
- Make bprm->argmin only visible under CONFIG_MMU
- Add KUnit testing of bprm_stack_limits()
* tag 'execve-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
exec: Avoid pathological argc, envc, and bprm->p values
execve: Keep bprm->argmin behind CONFIG_MMU
ELF: fix kernel.randomize_va_space double read
exec: Add KUnit test for bprm_stack_limits()
binfmt_elf: Honor PT_LOAD alignment for static PIE
binfmt_elf: Calculate total_size earlier
selftests/exec: Build both static and non-static load_address tests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"Most of this is part of my ongoing work to clean up the system call
tables. In this bit, all of the newer architectures are converted to
use the machine readable syscall.tbl format instead in place of
complex macros in include/uapi/asm-generic/unistd.h.
This follows an earlier series that fixed various API mismatches and
in turn is used as the base for planned simplifications.
The other two patches are dead code removal and a warning fix"
* tag 'asm-generic-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
vmlinux.lds.h: catch .bss..L* sections into BSS")
fixmap: Remove unused set_fixmap_offset_io()
riscv: convert to generic syscall table
openrisc: convert to generic syscall table
nios2: convert to generic syscall table
loongarch: convert to generic syscall table
hexagon: use new system call table
csky: convert to generic syscall table
arm64: rework compat syscall macros
arm64: generate 64-bit syscall.tbl
arm64: convert unistd_32.h to syscall.tbl format
arc: convert to generic syscall table
clone3: drop __ARCH_WANT_SYS_CLONE3 macro
kbuild: add syscall table generation to scripts/Makefile.asm-headers
kbuild: verify asm-generic header list
loongarch: avoid generating extra header files
um: don't generate asm/bpf_perf_event.h
csky: drop asm/gpio.h wrapper
syscalls: add generic scripts/syscall.tbl
|
|
KVM selftests for 6.11
- Remove dead code in the memslot modification stress test.
- Treat "branch instructions retired" as supported on all AMD Family 17h+ CPUs.
- Print the guest pseudo-RNG seed only when it changes, to avoid spamming the
log for tests that create lots of VMs.
- Make the PMU counters test less flaky when counting LLC cache misses by
doing CLFLUSH{OPT} in every loop iteration.
|
|
KVM x86 misc changes for 6.11
- Add a global struct to consolidate tracking of host values, e.g. EFER, and
move "shadow_phys_bits" into the structure as "maxphyaddr".
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC
bus frequency, because TDX.
- Print the name of the APICv/AVIC inhibits in the relevant tracepoint.
- Clean up KVM's handling of vendor specific emulation to consistently act on
"compatible with Intel/AMD", versus checking for a specific vendor.
- Misc cleanups
|
|
KVM generic changes for 6.11
- Enable halt poll shrinking by default, as Intel found it to be a clear win.
- Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
- Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
- A few minor cleanups
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.11
- Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
- Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
- Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1 of
the protocol
- FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
- New command-line parameter to control the WFx trap behavior under KVM
- Introduce kCFI hardening in the EL2 hypervisor
- Fixes + cleanups for handling presence/absence of FEAT_TCRX
- Miscellaneous fixes + documentation updates
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu mitigation updates from Borislav Petkov:
- Add a spectre_bhi=vmexit mitigation option aimed at cloud
environments
- Remove duplicated Spectre cmdline option documentation
- Add separate macro definitions for syscall handlers which do not
return in order to address objtool warnings
* tag 'x86_bugs_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Add 'spectre_bhi=vmexit' cmdline option
x86/bugs: Remove duplicate Spectre cmdline option descriptions
x86/syscall: Mark exit[_group] syscall handlers __noreturn
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
- Make error checking of AMD SMN accesses more robust in the callers as
they're the only ones who can interpret the results properly
- The usual cleanups and fixes, left and right
* tag 'x86_misc_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kmsan: Fix hook for unaligned accesses
x86/platform/iosf_mbi: Convert PCIBIOS_* return codes to errnos
x86/pci/xen: Fix PCIBIOS_* return code handling
x86/pci/intel_mid_pci: Fix PCIBIOS_* return code handling
x86/of: Return consistent error type from x86_of_pci_irq_enable()
hwmon: (k10temp) Rename _data variable
hwmon: (k10temp) Remove unused HAVE_TDIE() macro
hwmon: (k10temp) Reduce k10temp_get_ccd_support() parameters
hwmon: (k10temp) Define a helper function to read CCD temperature
x86/amd_nb: Enhance SMN access error checking
hwmon: (k10temp) Check return value of amd_smn_read()
EDAC/amd64: Check return value of amd_smn_read()
EDAC/amd64: Remove unused register accesses
tools/x86/kcpuid: Add missing dir via Makefile
x86, arm: Add missing license tag to syscall tables files
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 alternatives updates from Borislav Petkov:
"This is basically PeterZ's idea to nest the alternative macros to
avoid the need to "spell out" the number of alternates in an
ALTERNATIVE_n() macro and thus have an ever-increasing complexity in
those definitions.
For ease of bisection, the old macros are converted to the new, nested
variants in a step-by-step manner so that in case an issue is
encountered during testing, one can pinpoint the place where it fails
easier.
Because debugging alternatives is a serious pain"
* tag 'x86_alternatives_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives, kvm: Fix a couple of CALLs without a frame pointer
x86/alternative: Replace the old macros
x86/alternative: Convert the asm ALTERNATIVE_3() macro
x86/alternative: Convert the asm ALTERNATIVE_2() macro
x86/alternative: Convert the asm ALTERNATIVE() macro
x86/alternative: Convert ALTERNATIVE_3()
x86/alternative: Convert ALTERNATIVE_TERNARY()
x86/alternative: Convert alternative_call_2()
x86/alternative: Convert alternative_call()
x86/alternative: Convert alternative_io()
x86/alternative: Convert alternative_input()
x86/alternative: Convert alternative_2()
x86/alternative: Convert alternative()
x86/alternatives: Add nested alternatives macros
x86/alternative: Zap alternative_ternary()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"The majority of added lines are two new modules: the GPIO virtual
consumer module that improves our ability to add automated tests for
the kernel API and the "sloppy" logic analyzer module that uses the
GPIO API to implement a coarse-grained debugging tool for useful for
remote development.
Other than that we have the usual assortment of various driver
extensions, improvements to the core GPIO code, DT-bindings and other
documentation updates as well as an extension to the interrupt
simulator:
GPIOLIB core:
- rework kfifo handling rework in the character device code
- improve the labeling of GPIOs requested as interrupts and show more
info on interrupt-only GPIOs in debugfs
- remove unused APIs
- unexport interfaces that are only used from the core GPIO code
- drop the return value from gpiochip_set_desc_names() as it cannot
fail
- move a string array definition out of a header and into a specific
compilation unit
- convert the last user of gpiochip_get_desc() other than GPIO core
to using a safer alternative
- use array_index_nospec() where applicable
New drivers:
- add a "virtual GPIO consumer" module that allows requesting GPIOs
from actual hardware and driving tests of the in-kernel GPIO API
from user-space over debugfs
- add a GPIO-based "sloppy" logic analyzer module useful for "first
glance" debugging on remote boards
Driver improvements:
- add support for a new model to gpio-pca953x
- lock GPIOs as interrupts in gpio-sim when the lines are requested
as irqs via the simulator domain + some other minor improvements
- improve error reporting in gpio-syscon
- convert gpio-ath79 to using dynamic GPIO base and range
- use pcibios_err_to_errno() for converting PCIBIOS error codes to
errno vaues in gpio-amd8111 and gpio-rdc321x
- allow building gpio-brcmstb for the BCM2835 architecture
DT bindings:
- convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema
- document new properties for aspeed,gpio, fsl,qoriq-gpio and
gpio-vf610
- document new compatibles for pca953x and fsl,qoriq-gpio
Documentation:
- document stricter behavior of the GPIO character device uAPI with
regards to reconfiguring requested line without direction set
- clarify the effect of the active-low flag on line values and edges
- remove documentation for the legacy GPIO API in order to stop
tempting people to use it
- document the preference for using pread() for reading edge events
in the sysfs API
Other:
- add an extended initializer to the interrupt simulator allowing to
specify a number of callbacks callers can use to be notified about
irqs being requested and released"
* tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (41 commits)
gpio: mc33880: Convert comma to semicolon
gpio: virtuser: actually use the "trimmed" local variable
dt-bindings: gpio: convert Atmel GPIO to json-schema
gpio: virtuser: new virtual testing driver for the GPIO API
dt-bindings: gpio: vf610: Allow gpio-line-names to be set
gpio: sim: lock GPIOs as interrupts when they are requested
genirq/irq_sim: add an extended irq_sim initializer
dt-bindings: gpio: fsl,qoriq-gpio: Add compatible string fsl,ls1046a-gpio
gpiolib: unexport gpiochip_get_desc()
gpio: add sloppy logic analyzer using polling
Documentation: gpio: Reconfiguration with unset direction (uAPI v2)
Documentation: gpio: Reconfiguration with unset direction (uAPI v1)
dt-bindings: gpio: fsl,qoriq-gpio: add common property gpio-line-names
gpio: ath79: convert to dynamic GPIO base allocation
pinctrl: da9062: replace gpiochip_get_desc() with gpio_device_get_desc()
gpiolib: put gpio_suffixes in a single compilation unit
Documentation: gpio: Clarify effect of active low flag on line edges
Documentation: gpio: Clarify effect of active low flag on line values
gpiolib: Remove data-less gpiochip_add() function
gpio: sim: use devm_mutex_init()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The biggest part is the virtual CPU hotplug that touches ACPI,
irqchip. We also have some GICv3 optimisation for pseudo-NMIs that has
been queued via the arm64 tree. Otherwise the usual perf updates,
kselftest, various small cleanups.
Core:
- Virtual CPU hotplug support for arm64 ACPI systems
- cpufeature infrastructure cleanups and making the FEAT_ECBHB ID
bits visible to guests
- CPU errata: expand the speculative SSBS workaround to more CPUs
- GICv3, use compile-time PMR values: optimise the way regular IRQs
are masked/unmasked when GICv3 pseudo-NMIs are used, removing the
need for a static key in fast paths by using a priority value
chosen dynamically at boot time
ACPI:
- 'acpi=nospcr' option to disable SPCR as default console for arm64
- Move some ACPI code (cpuidle, FFH) to drivers/acpi/arm64/
Perf updates:
- Rework of the IMX PMU driver to enable support for I.MX95
- Enable support for tertiary match groups in the CMN PMU driver
- Initial refactoring of the CPU PMU code to prepare for the fixed
instruction counter introduced by Arm v9.4
- Add missing PMU driver MODULE_DESCRIPTION() strings
- Hook up DT compatibles for recent CPU PMUs
Kselftest updates:
- Kernel mode NEON fp-stress
- Cleanups, spelling mistakes
Miscellaneous:
- arm64 Documentation update with a minor clarification on TBI
- Fix missing IPI statistics
- Implement raw_smp_processor_id() using thread_info rather than a
per-CPU variable (better code generation)
- Make MTE checking of in-kernel asynchronous tag faults conditional
on KASAN being enabled
- Minor cleanups, typos"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (69 commits)
selftests: arm64: tags: remove the result script
selftests: arm64: tags_test: conform test to TAP output
perf: add missing MODULE_DESCRIPTION() macros
arm64: smp: Fix missing IPI statistics
irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI
ACPI: Add acpi=nospcr to disable ACPI SPCR as default console on ARM64
Documentation: arm64: Update memory.rst for TBI
arm64/cpufeature: Replace custom macros with fields from ID_AA64PFR0_EL1
KVM: arm64: Replace custom macros with fields from ID_AA64PFR0_EL1
perf: arm_pmuv3: Include asm/arm_pmuv3.h from linux/perf/arm_pmuv3.h
perf: arm_v6/7_pmu: Drop non-DT probe support
perf/arm: Move 32-bit PMU drivers to drivers/perf/
perf: arm_pmuv3: Drop unnecessary IS_ENABLED(CONFIG_ARM64) check
perf: arm_pmuv3: Avoid assigning fixed cycle counter with threshold
arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU
perf: imx_perf: add support for i.MX95 platform
perf: imx_perf: fix counter start and config sequence
perf: imx_perf: refactor driver for imx93
perf: imx_perf: let the driver manage the counter usage rather the user
perf: imx_perf: add macro definitions for parsing config attr
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Added Michal Koutný as a maintainer
- Counters in pids.events were behaving inconsistently. pids.events
made properly hierarchical and pids.events.local added
- misc.peak and misc.events.local added
- cpuset remote partition creation and cpuset.cpus.exclusive handling
improved
- Code cleanups, non-critical fixes, doc updates
- for-6.10-fixes is merged in to receive two non-critical fixes that
didn't trigger pull
* tag 'cgroup-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (23 commits)
cgroup: Add Michal Koutný as a maintainer
cgroup/misc: Introduce misc.events.local
cgroup/rstat: add force idle show helper
cgroup: Protect css->cgroup write under css_set_lock
cgroup/misc: Introduce misc.peak
cgroup_misc: add kernel-doc comments for enum misc_res_type
cgroup/cpuset: Prevent UAF in proc_cpuset_show()
selftest/cgroup: Update test_cpuset_prs.sh to match changes
cgroup/cpuset: Make cpuset.cpus.exclusive independent of cpuset.cpus
cgroup/cpuset: Delay setting of CS_CPU_EXCLUSIVE until valid partition
selftest/cgroup: Fix test_cpuset_prs.sh problems reported by test robot
cgroup/cpuset: Fix remote root partition creation problem
cgroup: avoid the unnecessary list_add(dying_tasks) in cgroup_exit()
cgroup/cpuset: Optimize isolated partition only generate_sched_domains() calls
cgroup/cpuset: Reduce the lock protecting CS_SCHED_LOAD_BALANCE
kernel/cgroup: cleanup cgroup_base_files when fail to add cgroup_psi_files
selftests: cgroup: Add basic tests for pids controller
selftests: cgroup: Lexicographic order in Makefile
cgroup/pids: Add pids.events.local
cgroup/pids: Make event counters hierarchical
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc updates from Paul McKenney:
- Fix selftest printf format mismatch in expect_str_buf_eq()
- Stop using brk() and sbrk() when testing against musl, which
implements these two functions with ENOMEM
- Make tests use -Werror to force failure on compiler warnings
- Add limits for the {u,}intmax_t, ulong and {u,}llong types
- Implement strtol() and friends
- Add facility to skip nolibc-specific tests when running against
non-nolibc libraries
- Implement strerror()
- Also use strerror() on nolibc when running kselftests
* tag 'nolibc.2024.07.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
selftests: kselftest: also use strerror() on nolibc
tools/nolibc: implement strerror()
selftests/nolibc: introduce condition to run tests only on nolibc
tools/nolibc: implement strtol() and friends
tools/nolibc: add limits for {u,}intmax_t, ulong and {u,}llong
selftests/nolibc: run-tests.sh: use -Werror by default
selftests/nolibc: disable brk()/sbrk() tests on musl
selftests/nolibc: fix printf format mismatch in expect_str_buf_eq()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull KCSAN updates from Paul McKenney:
- improve the documentation for the new __data_racy type qualifier
to the data_race() macro's kernel-doc header and to the LKMM's
access-marking documentation
- add missing MODULE_DESCRIPTION
* tag 'kcsan.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
kcsan: Add missing MODULE_DESCRIPTION() macro
kcsan: Add example to data_race() kerneldoc header
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Update Tasks RCU and Tasks Rude RCU description in Requirements.rst
and clarify rcu_assign_pointer() and rcu_dereference() ordering
properties
- Add lockdep assertions for RCU readers, limit inline wakeups for
callback-bypass synchronize_rcu(), add an
rcutree.nohz_full_patience_delay to reduce nohz_full OS jitter, add
Uladzislau Rezki as RCU maintainer, and fix a subtle
callback-migration memory-ordering issue
- Remove a number of redundant memory barriers
- Remove unnecessary bypass-list lock-contention mitigation, use
parking API instead of open-coded ad-hoc equivalent, and upgrade
obsolete comments
- Revert avoidance of a deadlock that can no longer occur and properly
synchronize Tasks Trace RCU checking of runqueues
- Add tests for handling of double-call_rcu() bug, add missing
MODULE_DESCRIPTION, and add a script that histograms the number of
calls to RCU updaters
- Fill out SRCU polled-grace-period API
* tag 'rcu.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (29 commits)
rcu: Fix rcu_barrier() VS post CPUHP_TEARDOWN_CPU invocation
rcu: Eliminate lockless accesses to rcu_sync->gp_count
MAINTAINERS: Add Uladzislau Rezki as RCU maintainer
rcu: Add rcutree.nohz_full_patience_delay to reduce nohz_full OS jitter
rcu/exp: Remove redundant full memory barrier at the end of GP
rcu: Remove full memory barrier on RCU stall printout
rcu: Remove full memory barrier on boot time eqs sanity check
rcu/exp: Remove superfluous full memory barrier upon first EQS snapshot
rcu: Remove superfluous full memory barrier upon first EQS snapshot
rcu: Remove full ordering on second EQS snapshot
srcu: Fill out polled grace-period APIs
srcu: Update cleanup_srcu_struct() comment
srcu: Add NUM_ACTIVE_SRCU_POLL_OLDSTATE
srcu: Disable interrupts directly in srcu_gp_end()
rcu: Disable interrupts directly in rcu_gp_init()
rcu/tree: Reduce wake up for synchronize_rcu() common case
rcu/tasks: Fix stale task snaphot for Tasks Trace
tools/rcu: Add rcu-updaters.sh script
rcutorture: Add missing MODULE_DESCRIPTION() macros
rcutorture: Fix rcu_torture_fwd_cb_cr() data race
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull memory model updates from Paul McKenney:
"lkmm: Fix corner-case locking bug and improve documentation
A simple but odd single-process litmus test acquires and immediately
releases a lock, then calls spin_is_locked(). LKMM acts if it was a
deadlock due to an assumption that spin_is_locked() will follow a
spin_lock() or some other process's spin_unlock(). This litmus test
manages to violate this assumption because the spin_is_locked()
follows the same process's spin_unlock().
This series fixes this bug, reorganizes and optimizes the lock.cat
model, and updates documentation"
* tag 'lkmm.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/memory-model: Code reorganization in lock.cat
tools/memory-model: Fix bug in lock.cat
tools/memory-model: Add access-marking.txt to README
tools/memory-model: Add KCSAN LF mentorship session citation
|
|
Merge in late fixes to prepare for the 6.11 net-next PR.
Conflicts:
93c3a96c301f ("net: pse-pd: Do not return EOPNOSUPP if config is null")
4cddb0f15ea9 ("net: ethtool: pse-pd: Fix possible null-deref")
30d7b6727724 ("net: ethtool: Add new power limit get and set features")
https://lore.kernel.org/20240715123204.623520bb@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount query updates from Christian Brauner:
"This contains work to extend the abilities of listmount() and
statmount() and various fixes and cleanups.
Features:
- Allow iterating through mounts via listmount() from newest to
oldest. This makes it possible for mount(8) to keep iterating the
mount table in reverse order so it gets newest mounts first.
- Relax permissions on listmount() and statmount().
It's not necessary to have capabilities in the initial namespace:
it is sufficient to have capabilities in the owning namespace of
the mount namespace we're located in to list unreachable mounts in
that namespace.
- Extend both listmount() and statmount() to list and stat mounts in
foreign mount namespaces.
Currently the only way to iterate over mount entries in mount
namespaces that aren't in the caller's mount namespace is by
crawling through /proc in order to find /proc/<pid>/mountinfo for
the relevant mount namespace.
This is both very clumsy and hugely inefficient. So extend struct
mnt_id_req with a new member that allows to specify the mount
namespace id of the mount namespace we want to look at.
Luckily internally we already have most of the infrastructure for
this so we just need to expose it to userspace. Give userspace a
way to retrieve the id of a mount namespace via statmount() and
through a new nsfs ioctl() on mount namespace file descriptor.
This comes with appropriate selftests.
- Expose mount options through statmount().
Currently if userspace wants to get mount options for a mount and
with statmount(), they still have to open /proc/<pid>/mountinfo to
parse mount options. Simply the information through statmount()
directly.
Afterwards it's possible to only rely on statmount() and
listmount() to retrieve all and more information than
/proc/<pid>/mountinfo provides.
This comes with appropriate selftests.
Fixes:
- Avoid copying to userspace under the namespace semaphore in
listmount.
Cleanups:
- Simplify the error handling in listmount by relying on our newly
added cleanup infrastructure.
- Refuse invalid mount ids early for both listmount and statmount"
* tag 'vfs-6.11.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: reject invalid last mount id early
fs: refuse mnt id requests with invalid ids early
fs: find rootfs mount of the mount namespace
fs: only copy to userspace on success in listmount()
sefltests: extend the statmount test for mount options
fs: use guard for namespace_sem in statmount()
fs: export mount options via statmount()
fs: rename show_mnt_opts -> show_vfsmnt_opts
selftests: add a test for the foreign mnt ns extensions
fs: add an ioctl to get the mnt ns id from nsfs
fs: Allow statmount() in foreign mount namespace
fs: Allow listmount() in foreign mount namespace
fs: export the mount ns id via statmount
fs: keep an index of current mount namespaces
fs: relax permissions for statmount()
listmount: allow listing in reverse order
fs: relax permissions for listmount()
fs: simplify error handling
fs: don't copy to userspace under namespace semaphore
path: add cleanup helper
|
|
Merge OPP (operating performance points) and tooling updates for
6.11-rc1:
- Fix missing cleanup on error in _opp_attach_genpd() (Viresh Kumar).
- Introduce an OF helper function to inform if required-opps is used
and drop a redundant in-parameter to _set_opp_level() (Ulf Hansson).
- Update pm-graph to v5.12 which includes fixes and major code revamp
for python3.12 (Todd Brandt).
- Address several assorted issues in the cpupower utility (Roman
Storozhenko).
* pm-opp:
OPP: Introduce an OF helper function to inform if required-opps is used
OPP: Drop a redundant in-parameter to _set_opp_level()
OPP: Fix missing cleanup on error in _opp_attach_genpd()
* pm-tools:
cpupower: fix lib default installation path
cpupower: Disable direct build of the 'bench' subproject
cpupower: Change the var type of the 'monitor' subcommand display mode
cpupower: Remove absent 'v' parameter from monitor man page
cpupower: Improve cpupower build process description
cpupower: Add 'help' target to the main Makefile
cpupower: Replace a dead reference link with working ones
pm-graph: v5.12, code revamp for python3.12
pm-graph: v5.12, fixes
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for for v6.11
There are a lot of changes in here, though the big bulk of things is
cleanups and simplifications of various kinds which are internally
rather than externally visible. A good chunk of those are DT schema
conversions, but there's also a lot of changes in the code.
Highlights:
- Syncing of features between simple-audio-card and the two
audio-graph cards so there is no reason to stick with an older
driver.
- Support for specifying the order of operations for components within
cards to allow quirking for unusual systems.
- New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5
and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments PCM5242.
|
|
Merge all the slab patches previously collected on top of v6.10-rc1,
over cleanups/fixes that had to be based on rc6.
|
|
Fixing the syscall number value.
Link: https://lore.kernel.org/all/20240712135228.1619332-3-jolsa@kernel.org/
Fixes: 9e7f74e64ae5 ("selftests/bpf: Add uretprobe syscall call from user space test")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
|
|
The goal is to check that the source address selected by the kernel is
routable when a leaking route is used. ICMP, TCP and UDP connections are
tested.
The symmetric topology is enough for this test.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240710081521.3809742-5-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Lately, an additional locking was added by commit c0a40097f0bc
("drivers: core: synchronize really_probe() and dev_uevent()"). The
locking protects dev_uevent() calling. This function is used to send
messages from the kernel to user space. Uevent messages notify user space
about changes in device states, such as when a device is added, removed,
or changed. These messages are used by udev (or other similar user-space
tools) to apply device-specific rules.
After reloading devlink instance, udev events should be processed. This
locking causes a short delay of udev events handling.
One example for useful udev rule is renaming ports. 'forwading.config'
can be configured to use names after udev rules are applied. Some tests run
devlink_reload() and immediately use the updated names. This worked before
the above mentioned commit was pushed, but now the delay of uevent messages
causes that devlink_reload() returns before udev events are handled and
tests fail.
Adjust devlink_reload() to not assume that udev events are already
processed when devlink reload is done, instead, wait for udev events to
ensure they are processed before returning from the function.
Without this patch:
TESTS='rif_mac_profile' ./resource_scale.sh
TEST: 'rif_mac_profile' 4 [ OK ]
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory
Cannot find device "swp1"
Cannot find device "swp2"
TEST: setup_wait_dev (: Interface swp1 does not come up.) [FAIL]
With this patch:
$ TESTS='rif_mac_profile' ./resource_scale.sh
TEST: 'rif_mac_profile' 4 [ OK ]
TEST: 'rif_mac_profile' overflow 5 [ OK ]
This is relevant not only for this test.
Fixes: bc7cbb1e9f4c ("selftests: forwarding: Add devlink_lib.sh")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/89367666e04b38a8993027f1526801ca327ab96a.1720709333.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
