summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2024-11-18wireguard: selftests: load nf_conntrack if not presentHangbin Liu
Some distros may not load nf_conntrack by default, which will cause subsequent nf_conntrack sets to fail. Load this module if it is not already loaded. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> [ Jason: add [[ -e ... ]] check so this works in the qemu harness. ] Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://patch.msgid.link/20241117212030.629159-4-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18selftests: net: add more info to error in bpf_offloadJakub Kicinski
bpf_offload caught a spurious warning in TC recently, but the error message did not provide enough information to know what the problem is: FAIL: Found 'netdevsim' in command output, leaky extack? Add the extack to the output: FAIL: Unexpected command output, leaky extack? ('netdevsim', 'Warning: Filter with specified priority/protocol not found.') Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18selftests: net: netlink-dumps: validation checksJakub Kicinski
The sanity checks are going to get silently cast to unsigned and always pass. Cast the sizeof to signed size. Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241115003248.733862-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18tools: ynl-gen: allow uapi headers in sub-dirsJakub Kicinski
Binder places its headers under include/uapi/linux/android/ Make sure replace / with _ in the uAPI header guard, the c_upper() is more strict and only converts - to _. This is likely a good constraint to have, to enforce sane naming in enums etc. But paths may include /. Signed-off-by: Li Li <dualli@google.com> Link: https://patch.msgid.link/20241113193239.2113577-2-dualli@chromium.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15selftests: net: fdb_notify: Add a test for FDB notificationsPetr Machata
Check that only one notification is produced for various FDB edit operations. Regarding the ip_link_add() and ip_link_master() helpers. This pattern of action plus corresponding defer is bound to come up often, and a dedicated vocabulary to capture it will be handy. tunnel_create() and vlan_create() from forwarding/lib.sh are somewhat opaque and perhaps too kitchen-sinky, so I tried to go in the opposite direction with these ones, and wrapped only the bare minimum to schedule a corresponding cleanup. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://patch.msgid.link/910c5880ae6d3b558d6889cbdba2be690c2615c6.1731589511.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15selftests: net: lib: Add kill_processPetr Machata
A number of selftests run processes in the background and need to kill them afterwards. Instead for everyone to open-code the kill / wait / redirect mantra, add a helper in net/lib.sh. Convert existing open-code sites. Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Link: https://patch.msgid.link/a9db102067d741c118f0bd93b10c75e2a34665ea.1731589511.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15selftests: net: lib: Move checks from forwarding/lib.sh herePetr Machata
For logging to be useful, something has to set RET and retmsg by calling ret_set_ksft_status(). There is a suite of functions to that end in forwarding/lib: check_err, check_fail et.al. Move them to net/lib.sh so that every net test can use them. Existing lib.sh users might be using these same names for their functions. However lib.sh is always sourced near the top of the file (checked), and whatever new definitions will simply override the ones provided by lib.sh. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://patch.msgid.link/f488a00dc85b8e0c1f3c71476b32b21b5189a847.1731589511.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15selftests: net: lib: Move tests_run from forwarding/lib.sh herePetr Machata
It would be good to use the same mechanism for scheduling and dispatching general net tests as the many forwarding tests already use. To that end, move the logging helpers to net/lib.sh so that every net test can use them. Existing lib.sh users might be using the name themselves. However lib.sh is always sourced near the top of the file (checked), and whatever new definition will simply override the one provided by lib.sh. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://patch.msgid.link/a6fc083486493425b2c61185c327845b6ce3233a.1731589511.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15selftests: net: lib: Move logging from forwarding/lib.sh herePetr Machata
Many net selftests invent their own logging helpers. These really should be in a library sourced by these tests. Currently forwarding/lib.sh has a suite of perfectly fine logging helpers, but sourcing a forwarding/ library from a higher-level directory smells of layering violation. In this patch, move the logging helpers to net/lib.sh so that every net test can use them. Together with the logging helpers, it's also necessary to move pause_on_fail(), and EXIT_STATUS and RET. Existing lib.sh users might be using these same names for their functions or variables. However lib.sh is always sourced near the top of the file (checked), and whatever new definitions will simply override the ones provided by lib.sh. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://patch.msgid.link/edd3785a3bd72ffbe1409300989e993ee50ae98b.1731589511.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-14selftest: extend test_rss_context_queue_reconfigure for action additionEdward Cree
The combination of ntuple action (ring_cookie) and RSS context can cause an ntuple rule to target a higher queue than appears in any RSS indirection table or directly in the ntuple rule, since the two numbers are added together. Verify the logic that prevents reducing the queue count in this case. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/58276b800ab78c0a79c1918046ccae7fe45ba802.1731499022.git.ecree.xilinx@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-14selftest: validate RSS+ntuple filters with nonzero ring_cookieEdward Cree
Test creates an ntuple filter with 'action 2' and an RSS context whose indirection table has entries 0 and 1. Resulting traffic should go to queues 2 and 3; verify that it never hits queues 0 and 1. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/114afdf4d2867f72ed27751e8e08fe8b128a8529.1731499022.git.ecree.xilinx@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-14selftest: include dst-ip in ethtool ntuple rulesEdward Cree
sfc hardware does not support filters with only ipproto + dst-port; adding dst-ip to the flow spec allows the rss_ctx test to be run on these devices. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com> Link: https://patch.msgid.link/8e5d23c8f21310c23c080cc7bcd31b76f8fd3096.1731499022.git.ecree.xilinx@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-14Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Martin KaFai Lau says: ==================== pull-request: bpf-next 2024-11-14 We've added 9 non-merge commits during the last 4 day(s) which contain a total of 3 files changed, 226 insertions(+), 84 deletions(-). The main changes are: 1) Fixes to bpf_msg_push/pop_data and test_sockmap. The changes has dependency on the other changes in the bpf-next/net branch, from Zijian Zhang. 2) Drop netns codes from mptcp test. Reuse the common helpers in test_progs, from Geliang Tang. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: bpf, sockmap: Fix sk_msg_reset_curr bpf, sockmap: Several fixes to bpf_msg_pop_data bpf, sockmap: Several fixes to bpf_msg_push_data selftests/bpf: Add more tests for test_txmsg_push_pop in test_sockmap selftests/bpf: Add push/pop checking for msg_verify_data in test_sockmap selftests/bpf: Fix total_bytes in msg_loop_rx in test_sockmap selftests/bpf: Fix SENDPAGE data logic in test_sockmap selftests/bpf: Add txmsg_pass to pull/push/pop in test_sockmap selftests/bpf: Drop netns helpers in mptcp ==================== Link: https://patch.msgid.link/20241114202832.3187927-1-martin.lau@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-14tools/net/ynl: add async notification handlingDonald Hunter
The notification handling in ynl is currently very simple, using sleep() to wait a period of time and then handling all the buffered messages in a single batch. This patch adds async notification handling so that messages can be processed as they are received. This makes it possible to use ynl as a library that supplies notifications in a timely manner. - Add poll_ntf() to be a generator that yields 1 notification at a time and blocks until a notification is available. - Add a --duration parameter to the CLI, with --sleep as an alias. ./tools/net/ynl/cli.py \ --spec <SPEC> --subscribe <TOPIC> [ --duration <SECS> ] The cli will report any notifications for duration seconds and then exit. If duration is not specified, then it will poll forever, until interrupted. Here is an example python snippet that shows how to use ynl as a library for receiving notifications: ynl = YnlFamily(f"{dir}/rt_route.yaml") ynl.ntf_subscribe('rtnlgrp-ipv4-route') for event in ynl.poll_ntf(): handle(event) Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20241113090843.72917-3-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-14Revert "tools/net/ynl: improve async notification handling"Donald Hunter
This reverts commit 1bf70e6c3a5346966c25e0a1ff492945b25d3f80. This modification to check_ntf() is being reverted so that its behaviour remains equivalent to ynl_ntf_check() in the C YNL. Instead a new poll_ntf() will be added in a separate patch. Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20241113090843.72917-2-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.12-rc8). Conflicts: tools/testing/selftests/net/.gitignore 252e01e68241 ("selftests: net: add netlink-dumps to .gitignore") be43a6b23829 ("selftests: ncdevmem: Move ncdevmem under drivers/net/hw") https://lore.kernel.org/all/20241113122359.1b95180a@canb.auug.org.au/ drivers/net/phy/phylink.c 671154f174e0 ("net: phylink: ensure PHY momentary link-fails are handled") 7530ea26c810 ("net: phylink: remove "using_mac_select_pcs"") Adjacent changes: drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c 5b366eae7193 ("stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines") e96321fad3ad ("net: ethernet: Switch back to struct platform_driver::remove()") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-14Merge tag 'net-6.12-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bluetooth. Quite calm week. No new regression under investigation. Current release - regressions: - eth: revert "igb: Disable threaded IRQ for igb_msix_other" Current release - new code bugs: - bluetooth: btintel: direct exception event to bluetooth stack Previous releases - regressions: - core: fix data-races around sk->sk_forward_alloc - netlink: terminate outstanding dump on socket close - mptcp: error out earlier on disconnect - vsock: fix accept_queue memory leak - phylink: ensure PHY momentary link-fails are handled - eth: mlx5: - fix null-ptr-deref in add rule err flow - lock FTE when checking if active - eth: dwmac-mediatek: fix inverted handling of mediatek,mac-wol Previous releases - always broken: - sched: fix u32's systematic failure to free IDR entries for hnodes. - sctp: fix possible UAF in sctp_v6_available() - eth: bonding: add ns target multicast address to slave device - eth: mlx5: fix msix vectors to respect platform limit - eth: icssg-prueth: fix 1 PPS sync" * tag 'net-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits) net: sched: u32: Add test case for systematic hnode IDR leaks selftests: bonding: add ns multicast group testing bonding: add ns target multicast address to slave device net: ti: icssg-prueth: Fix 1 PPS sync stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines net: Make copy_safe_from_sockptr() match documentation net: stmmac: dwmac-mediatek: Fix inverted handling of mediatek,mac-wol ipmr: Fix access to mfc_cache_list without lock held samples: pktgen: correct dev to DEV net: phylink: ensure PHY momentary link-fails are handled mptcp: pm: use _rcu variant under rcu_read_lock mptcp: hold pm lock when deleting entry mptcp: update local address flags when setting it net: sched: cls_u32: Fix u32's systematic failure to free IDR entries for hnodes. MAINTAINERS: Re-add cancelled Renesas driver sections Revert "igb: Disable threaded IRQ for igb_msix_other" Bluetooth: btintel: Direct exception event to bluetooth stack Bluetooth: hci_core: Fix calling mgmt_device_connected virtio/vsock: Improve MSG_ZEROCOPY error handling vsock: Fix sk_error_queue memory leak ...
2024-11-14net: sched: u32: Add test case for systematic hnode IDR leaksAlexandre Ferrieux
Add a tdc test case to exercise the just-fixed systematic leak of IDR entries in u32 hnode disposal. Given the IDR in question is confined to the range [1..0x7FF], it is sufficient to create/delete the same filter 2048 times to fill it up and get a nonzero exit status from "tc filter add". Signed-off-by: Alexandre Ferrieux <alexandre.ferrieux@orange.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Victor Nogueira <victor@mojatatu.com> Link: https://patch.msgid.link/20241113100428.360460-1-alexandre.ferrieux@orange.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-14selftests: bonding: add ns multicast group testingHangbin Liu
Add a test to make sure the backup slaves join correct multicast group when arp_validate enabled and ns_ip6_target is set. Here is the result: TEST: arp_validate (active-backup ns_ip6_target arp_validate 0) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 1) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 2) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 3) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 4) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 5) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 6) [ OK ] TEST: arp_validate (join mcast group) [ OK ] Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-13ynl: samples: Fix the wrong format specifierLuo Yifan
Make a minor change to eliminate a static checker warning. The type of s->ifc is unsigned int, so the correct format specifier should be %u instead of %d. Signed-off-by: Luo Yifan <luoyifan@cmss.chinamobile.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241113011142.290474-1-luoyifan@cmss.chinamobile.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13tools: ynl: extend CFLAGS to keep options from environmentJan Stancek
Package build environments like Fedora rpmbuild introduced hardening options (e.g. -pie -Wl,-z,now) by passing a -spec option to CFLAGS and LDFLAGS. ynl Makefiles currently override CFLAGS but not LDFLAGS, which leads to a mismatch and build failure: CC sample devlink /usr/bin/ld: devlink.o: relocation R_X86_64_32 against symbol `ynl_devlink_family' can not be used when making a PIE object; recompile with -fPIE /usr/bin/ld: failed to set dynamic section sizes: bad value collect2: error: ld returned 1 exit status Extend CFLAGS to support hardening options set by build environment. Signed-off-by: Jan Stancek <jstancek@redhat.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/265b2d5d3a6d4721a161219f081058ed47dc846a.1731399562.git.jstancek@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13tools: ynl: add script dir to sys.pathJan Stancek
Python options like PYTHONSAFEPATH or -P [1] do not add script directory to PYTHONPATH. ynl depends on this path to build and run. [1] This option is default for Fedora rpmbuild since introduction of https://fedoraproject.org/wiki/Changes/PythonSafePath Signed-off-by: Jan Stancek <jstancek@redhat.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/b26537cdb6e1b24435b50b2ef81d71f31c630bc1.1731399562.git.jstancek@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfLinus Torvalds
Pull bpf fixes from Daniel Borkmann: - Fix a mismatching RCU unlock flavor in bpf_out_neigh_v6 (Jiawei Ye) - Fix BPF sockmap with kTLS to reject vsock and unix sockets upon kTLS context retrieval (Zijian Zhang) - Fix BPF bits iterator selftest for s390x (Hou Tao) * tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Fix mismatched RCU unlock flavour in bpf_out_neigh_v6 bpf: Add sk_is_inet and IS_ICSK check in tls_sw_has_ctx_tx/rx selftests/bpf: Use -4095 as the bad address for bits iterator
2024-11-13Merge tag 'mm-hotfixes-stable-2024-11-12-16-39' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "10 hotfixes, 7 of which are cc:stable. 7 are MM, 3 are not. All singletons" * tag 'mm-hotfixes-stable-2024-11-12-16-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm: swapfile: fix cluster reclaim work crash on rotational devices selftests: hugetlb_dio: fixup check for initial conditions to skip in the start mm/thp: fix deferred split queue not partially_mapped: fix mm/gup: avoid an unnecessary allocation call for FOLL_LONGTERM cases nommu: pass NULL argument to vma_iter_prealloc() ocfs2: fix UBSAN warning in ocfs2_verify_volume() nilfs2: fix null-ptr-deref in block_dirty_buffer tracepoint nilfs2: fix null-ptr-deref in block_touch_buffer tracepoint mm: page_alloc: move mlocked flag clearance into free_pages_prepare() mm: count zeromap read and set for swapout and swapin
2024-11-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "x86 and selftests fixes. x86: - When emulating a guest TLB flush for a nested guest, flush vpid01, not vpid02, if L2 is active but VPID is disabled in vmcs12, i.e. if L2 and L1 are sharing VPID '0' (from L1's perspective). - Fix a bug in the SNP initialization flow where KVM would return '0' to userspace instead of -errno on failure. - Move the Intel PT virtualization (i.e. outputting host trace to host buffer and guest trace to guest buffer) behind CONFIG_BROKEN. - Fix memory leak on failure of KVM_SEV_SNP_LAUNCH_START - Fix a bug where KVM fails to inject an interrupt from the IRR after KVM_SET_LAPIC. Selftests: - Increase the timeout for the memslot performance selftest to avoid false failures on arm64 and nested x86 platforms. - Fix a goof in the guest_memfd selftest where a for-loop initialized a bit mask to zero instead of BIT(0). - Disable strict aliasing when building KVM selftests to prevent the compiler from treating things like "u64 *" to "uint64_t *" cases as undefined behavior, which can lead to nasty, hard to debug failures. - Force -march=x86-64-v2 for KVM x86 selftests if and only if the uarch is supported by the compiler. - Fix broken compilation of kvm selftests after a header sync in tools/" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: Bury Intel PT virtualization (guest/host mode) behind CONFIG_BROKEN KVM: x86: Unconditionally set irr_pending when updating APICv state kvm: svm: Fix gctx page leak on invalid inputs KVM: selftests: use X86_MEMTYPE_WB instead of VMX_BASIC_MEM_TYPE_WB KVM: SVM: Propagate error from snp_guest_req_init() to userspace KVM: nVMX: Treat vpid01 as current if L2 is active, but with VPID disabled KVM: selftests: Don't force -march=x86-64-v2 if it's unsupported KVM: selftests: Disable strict aliasing KVM: selftests: fix unintentional noop test in guest_memfd_test.c KVM: selftests: memslot_perf_test: increase guest sync timeout
2024-11-12selftests: hugetlb_dio: fixup check for initial conditions to skip in the startDonet Tom
This test verifies that a hugepage, used as a user buffer for DIO operations, is correctly freed upon unmapping. To test this, we read the count of free hugepages before and after the mmap, DIO, and munmap operations, then check if the free hugepage count is the same. Reading free hugepages before the test was removed by commit 0268d4579901 ('selftests: hugetlb_dio: check for initial conditions to skip at the start'), causing the test to always fail. This patch adds back reading the free hugepages before starting the test. With this patch, the tests are now passing. Test results without this patch: ./tools/testing/selftests/mm/hugetlb_dio TAP version 13 1..4 # No. Free pages before allocation : 0 # No. Free pages after munmap : 100 not ok 1 : Huge pages not freed! # No. Free pages before allocation : 0 # No. Free pages after munmap : 100 not ok 2 : Huge pages not freed! # No. Free pages before allocation : 0 # No. Free pages after munmap : 100 not ok 3 : Huge pages not freed! # No. Free pages before allocation : 0 # No. Free pages after munmap : 100 not ok 4 : Huge pages not freed! # Totals: pass:0 fail:4 xfail:0 xpass:0 skip:0 error:0 Test results with this patch: /tools/testing/selftests/mm/hugetlb_dio TAP version 13 1..4 # No. Free pages before allocation : 100 # No. Free pages after munmap : 100 ok 1 : Huge pages freed successfully ! # No. Free pages before allocation : 100 # No. Free pages after munmap : 100 ok 2 : Huge pages freed successfully ! # No. Free pages before allocation : 100 # No. Free pages after munmap : 100 ok 3 : Huge pages freed successfully ! # No. Free pages before allocation : 100 # No. Free pages after munmap : 100 ok 4 : Huge pages freed successfully ! # Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0 Link: https://lkml.kernel.org/r/20241110064903.23626-1-donettom@linux.ibm.com Fixes: 0268d4579901 ("selftests: hugetlb_dio: check for initial conditions to skip in the start") Signed-off-by: Donet Tom <donettom@linux.ibm.com> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-11-11net: ipv4: Cache pmtu for all packet paths if multipath enabledVladimir Vdovin
Check number of paths by fib_info_num_path(), and update_or_create_fnhe() for every path. Problem is that pmtu is cached only for the oif that has received icmp message "need to frag", other oifs will still try to use "default" iface mtu. An example topology showing the problem: | host1 +---------+ | dummy0 | 10.179.20.18/32 mtu9000 +---------+ +-----------+----------------+ +---------+ +---------+ | ens17f0 | 10.179.2.141/31 | ens17f1 | 10.179.2.13/31 +---------+ +---------+ | (all here have mtu 9000) | +------+ +------+ | ro1 | 10.179.2.140/31 | ro2 | 10.179.2.12/31 +------+ +------+ | | ---------+------------+-------------------+------ | +-----+ | ro3 | 10.10.10.10 mtu1500 +-----+ | ======================================== some networks ======================================== | +-----+ | eth0| 10.10.30.30 mtu9000 +-----+ | host2 host1 have enabled multipath and sysctl net.ipv4.fib_multipath_hash_policy = 1: default proto static src 10.179.20.18 nexthop via 10.179.2.12 dev ens17f1 weight 1 nexthop via 10.179.2.140 dev ens17f0 weight 1 When host1 tries to do pmtud from 10.179.20.18/32 to host2, host1 receives at ens17f1 iface an icmp packet from ro3 that ro3 mtu=1500. And host1 caches it in nexthop exceptions cache. Problem is that it is cached only for the iface that has received icmp, and there is no way that ro3 will send icmp msg to host1 via another path. Host1 now have this routes to host2: ip r g 10.10.30.30 sport 30000 dport 443 10.10.30.30 via 10.179.2.12 dev ens17f1 src 10.179.20.18 uid 0 cache expires 521sec mtu 1500 ip r g 10.10.30.30 sport 30033 dport 443 10.10.30.30 via 10.179.2.140 dev ens17f0 src 10.179.20.18 uid 0 cache So when host1 tries again to reach host2 with mtu>1500, if packet flow is lucky enough to be hashed with oif=ens17f1 its ok, if oif=ens17f0 it blackholes and still gets icmp msgs from ro3 to ens17f1, until lucky day when ro3 will send it through another flow to ens17f0. Signed-off-by: Vladimir Vdovin <deliran@verdict.gg> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20241108093427.317942-1-deliran@verdict.gg Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11net: netconsole: selftests: Check if netdevsim is availableBreno Leitao
The netconsole selftest relies on the availability of the netdevsim module. To ensure the test can run correctly, we need to check if the netdevsim module is either loaded or built-in before proceeding. Update the netconsole selftest to check for the existence of the /sys/bus/netdevsim/new_device file before running the test. If the file is not found, the test is skipped with an explanation that the CONFIG_NETDEVSIM kernel config option may not be enabled. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241108-netcon_selftest_deps-v1-1-1789cbf3adcd@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11selftests: net: Add busy_poll_testJoe Damato
Add an epoll busy poll test using netdevsim. This test is comprised of: - busy_poller (via busy_poller.c) - busy_poll_test.sh which loads netdevsim, sets up network namespaces, and runs busy_poller to receive data and socat to send data. The selftest tests two different scenarios: - busy poll (the pre-existing version in the kernel) - busy poll with suspend enabled (what this series adds) The data transmit is a 1MiB temporary file generated from /dev/urandom and the test is considered passing if the md5sum of the input file to socat matches the md5sum of the output file from busy_poller. netdevsim was chosen instead of veth due to netdevsim's support for netdev-genl. For now, this test uses the functionality that netdevsim provides. In the future, perhaps netdevsim can be extended to emulate device IRQs to more thoroughly test all pre-existing kernel options (like defer_hard_irqs) and suspend. Signed-off-by: Joe Damato <jdamato@fastly.com> Co-developed-by: Martin Karsten <mkarsten@uwaterloo.ca> Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20241109050245.191288-6-jdamato@fastly.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11net: Add napi_struct parameter irq_suspend_timeoutMartin Karsten
Add a per-NAPI IRQ suspension parameter, which can be get/set with netdev-genl. This patch doesn't change any behavior but prepares the code for other changes in the following commits which use irq_suspend_timeout as a timeout for IRQ suspension. Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca> Co-developed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Joe Damato <jdamato@fastly.com> Tested-by: Joe Damato <jdamato@fastly.com> Tested-by: Martin Karsten <mkarsten@uwaterloo.ca> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Link: https://patch.msgid.link/20241109050245.191288-2-jdamato@fastly.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11selftests: ncdevmem: Add automated testStanislav Fomichev
Only RX side for now and small message to test the setup. In the future, we can extend it to TX side and to testing both sides with a couple of megs of data. make \ -C tools/testing/selftests \ TARGETS="drivers/hw/net" \ install INSTALL_PATH=~/tmp/ksft scp ~/tmp/ksft ${HOST}: scp ~/tmp/ksft ${PEER}: cfg+="NETIF=${DEV}\n" cfg+="LOCAL_V6=${HOST_IP}\n" cfg+="REMOTE_V6=${PEER_IP}\n" cfg+="REMOTE_TYPE=ssh\n" cfg+="REMOTE_ARGS=root@${PEER}\n" echo -e "$cfg" | ssh root@${HOST} "cat > ksft/drivers/net/net.config" ssh root@${HOST} "cd ksft && ./run_kselftest.sh -t drivers/net:devmem.py" Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20241107181211.3934153-13-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11selftests: ncdevmem: Move ncdevmem under drivers/net/hwStanislav Fomichev
This is where all the tests that depend on the HW functionality live in and this is where the automated test is gonna be added in the next patch. Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20241107181211.3934153-12-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11selftests: ncdevmem: Run selftest when none of the -s or -c has been providedStanislav Fomichev
This will be used as a 'probe' mode in the selftest to check whether the device supports the devmem or not. Use hard-coded queue layout (two last queues) and prevent user from passing custom -q and/or -t. Reviewed-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20241107181211.3934153-11-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11selftests: ncdevmem: Remove hard-coded queue numbersStanislav Fomichev
Use single last queue of the device and probe it dynamically. Reviewed-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20241107181211.3934153-10-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11selftests: ncdevmem: Use YNL to enable TCP header splitStanislav Fomichev
In the next patch the hard-coded queue numbers are gonna be removed. So introduce some initial support for ethtool YNL and use it to enable header split. Also, tcp-data-split requires latest ethtool which is unlikely to be present in the distros right now. (ideally, we should not shell out to ethtool at all). Reviewed-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20241107181211.3934153-9-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11selftests: ncdevmem: Properly reset flow steeringStanislav Fomichev
ntuple off/on might be not enough to do it on all NICs. Add a bunch of shell crap to explicitly remove the rules. Reviewed-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20241107181211.3934153-8-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11selftests: ncdevmem: Switch to AF_INET6Stanislav Fomichev
Use dualstack socket to support both v4 and v6. v4-mapped-v6 address can be used to do v4. Reviewed-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20241107181211.3934153-7-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11selftests: ncdevmem: Remove default argumentsStanislav Fomichev
To make it clear what's required and what's not. Also, some of the values don't seem like a good defaults; for example eth1. Move the invocation comment to the top, add missing -s to the client and cleanup the client invocation a bit to make more readable. Reviewed-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20241107181211.3934153-6-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11selftests: ncdevmem: Make client_ip optionalStanislav Fomichev
Support 3-tuple filtering by making client_ip optional. When -c is not passed, don't specify src-ip/src-port in the filter. Reviewed-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20241107181211.3934153-5-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11selftests: ncdevmem: Unify error handlingStanislav Fomichev
There is a bunch of places where error() calls look out of place. Use the same error(1, errno, ...) pattern everywhere. Reviewed-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20241107181211.3934153-4-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11selftests: ncdevmem: Separate out dmabuf providerStanislav Fomichev
So we can plug the other ones in the future if needed. Reviewed-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20241107181211.3934153-3-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11selftests: ncdevmem: Redirect all non-payload output to stderrStanislav Fomichev
That should make it possible to do expected payload validation on the caller side. Reviewed-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20241107181211.3934153-2-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11selftests: hsr: Add test for VLANMD Danish Anwar
Add test for VLAN ping for HSR. The test adds vlan interfaces to the hsr interface and then verifies if ping to them works. Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20241106091710.3308519-5-danishanwar@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11ipv6: Fix soft lockups in fib6_select_path under high next hop churnOmid Ehtemam-Haghighi
Soft lockups have been observed on a cluster of Linux-based edge routers located in a highly dynamic environment. Using the `bird` service, these routers continuously update BGP-advertised routes due to frequently changing nexthop destinations, while also managing significant IPv6 traffic. The lockups occur during the traversal of the multipath circular linked-list in the `fib6_select_path` function, particularly while iterating through the siblings in the list. The issue typically arises when the nodes of the linked list are unexpectedly deleted concurrently on a different core—indicated by their 'next' and 'previous' elements pointing back to the node itself and their reference count dropping to zero. This results in an infinite loop, leading to a soft lockup that triggers a system panic via the watchdog timer. Apply RCU primitives in the problematic code sections to resolve the issue. Where necessary, update the references to fib6_siblings to annotate or use the RCU APIs. Include a test script that reproduces the issue. The script periodically updates the routing table while generating a heavy load of outgoing IPv6 traffic through multiple iperf3 clients. It consistently induces infinite soft lockups within a couple of minutes. Kernel log: 0 [ffffbd13003e8d30] machine_kexec at ffffffff8ceaf3eb 1 [ffffbd13003e8d90] __crash_kexec at ffffffff8d0120e3 2 [ffffbd13003e8e58] panic at ffffffff8cef65d4 3 [ffffbd13003e8ed8] watchdog_timer_fn at ffffffff8d05cb03 4 [ffffbd13003e8f08] __hrtimer_run_queues at ffffffff8cfec62f 5 [ffffbd13003e8f70] hrtimer_interrupt at ffffffff8cfed756 6 [ffffbd13003e8fd0] __sysvec_apic_timer_interrupt at ffffffff8cea01af 7 [ffffbd13003e8ff0] sysvec_apic_timer_interrupt at ffffffff8df1b83d -- <IRQ stack> -- 8 [ffffbd13003d3708] asm_sysvec_apic_timer_interrupt at ffffffff8e000ecb [exception RIP: fib6_select_path+299] RIP: ffffffff8ddafe7b RSP: ffffbd13003d37b8 RFLAGS: 00000287 RAX: ffff975850b43600 RBX: ffff975850b40200 RCX: 0000000000000000 RDX: 000000003fffffff RSI: 0000000051d383e4 RDI: ffff975850b43618 RBP: ffffbd13003d3800 R8: 0000000000000000 R9: ffff975850b40200 R10: 0000000000000000 R11: 0000000000000000 R12: ffffbd13003d3830 R13: ffff975850b436a8 R14: ffff975850b43600 R15: 0000000000000007 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 9 [ffffbd13003d3808] ip6_pol_route at ffffffff8ddb030c 10 [ffffbd13003d3888] ip6_pol_route_input at ffffffff8ddb068c 11 [ffffbd13003d3898] fib6_rule_lookup at ffffffff8ddf02b5 12 [ffffbd13003d3928] ip6_route_input at ffffffff8ddb0f47 13 [ffffbd13003d3a18] ip6_rcv_finish_core.constprop.0 at ffffffff8dd950d0 14 [ffffbd13003d3a30] ip6_list_rcv_finish.constprop.0 at ffffffff8dd96274 15 [ffffbd13003d3a98] ip6_sublist_rcv at ffffffff8dd96474 16 [ffffbd13003d3af8] ipv6_list_rcv at ffffffff8dd96615 17 [ffffbd13003d3b60] __netif_receive_skb_list_core at ffffffff8dc16fec 18 [ffffbd13003d3be0] netif_receive_skb_list_internal at ffffffff8dc176b3 19 [ffffbd13003d3c50] napi_gro_receive at ffffffff8dc565b9 20 [ffffbd13003d3c80] ice_receive_skb at ffffffffc087e4f5 [ice] 21 [ffffbd13003d3c90] ice_clean_rx_irq at ffffffffc0881b80 [ice] 22 [ffffbd13003d3d20] ice_napi_poll at ffffffffc088232f [ice] 23 [ffffbd13003d3d80] __napi_poll at ffffffff8dc18000 24 [ffffbd13003d3db8] net_rx_action at ffffffff8dc18581 25 [ffffbd13003d3e40] __do_softirq at ffffffff8df352e9 26 [ffffbd13003d3eb0] run_ksoftirqd at ffffffff8ceffe47 27 [ffffbd13003d3ec0] smpboot_thread_fn at ffffffff8cf36a30 28 [ffffbd13003d3ee8] kthread at ffffffff8cf2b39f 29 [ffffbd13003d3f28] ret_from_fork at ffffffff8ce5fa64 30 [ffffbd13003d3f50] ret_from_fork_asm at ffffffff8ce03cbb Fixes: 66f5d6ce53e6 ("ipv6: replace rwlock with rcu and spinlock in fib6_table") Reported-by: Adrian Oliver <kernel@aoliver.ca> Signed-off-by: Omid Ehtemam-Haghighi <omid.ehtemamhaghighi@menlosecurity.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Ido Schimmel <idosch@idosch.org> Cc: Kuniyuki Iwashima <kuniyu@amazon.com> Cc: Simon Horman <horms@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20241106010236.1239299-1-omid.ehtemamhaghighi@menlosecurity.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11selftests: netdevsim: add ethtool features to macsec offload testsSabrina Dubroca
The test verifies that available features aren't changed by toggling offload on the device. Creating a device with offload off and then enabling it later should result in the same features as creating the device with offload enabled directly. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/ba801bd0a75b02de2dddbfc77f9efceb8b3d8a2e.1730929545.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11selftests: netdevsim: add test toggling macsec offloadSabrina Dubroca
The test verifies that toggling offload works (both via rtnetlink and macsec's genetlink APIs). This is only possible when no SA is configured. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/bf8e27ee0d921caa4eb35f1e830eca6d4080ddb2.1730929545.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11selftests: move macsec offload tests from net/rtnetlink to drivers/net/netdvesimSabrina Dubroca
We're going to expand this test, and macsec offload is only lightly related to rtnetlink. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/a1f92c250cc129b4bb111a206c4b560bab4e24a5.1730929545.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11selftests: netdevsim: add a test checking ethtool featuresSabrina Dubroca
Add a test checking that some features are active by default and changeable. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/fff58fa70f8a300440958b5020f6a4eb2e9dad61.1730929545.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11Merge tag 'sched_ext-for-6.12-rc7-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext Pull sched_ext fixes from Tejun Heo: - The fair sched class currently has a bug where its balance() returns true telling the sched core that it has tasks to run but then NULL from pick_task(). This makes sched core call sched_ext's pick_task() without preceding balance() which can lead to stalls in partial mode. For now, work around by detecting the condition and forcing the CPU to go through another scheduling cycle. - Add a missing newline to an error message and fix drgn introspection tool which went out of sync. * tag 'sched_ext-for-6.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: sched_ext: Handle cases where pick_task_scx() is called without preceding balance_scx() sched_ext: Update scx_show_state.py to match scx_ops_bypass_depth's new type sched_ext: Add a missing newline at the end of an error message
2024-11-11mm: page_frag: avoid caller accessing 'page_frag_cache' directlyYunsheng Lin
Use appropriate frag_page API instead of caller accessing 'page_frag_cache' directly. CC: Andrew Morton <akpm@linux-foundation.org> CC: Linux-MM <linux-mm@kvack.org> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Chuck Lever <chuck.lever@oracle.com> Link: https://patch.msgid.link/20241028115343.3405838-5-linyunsheng@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>