From 0808ed6ebbc292222ca069d339744870f6d801da Mon Sep 17 00:00:00 2001 From: Tomas Henzl Date: Fri, 24 Mar 2023 14:52:49 +0100 Subject: scsi: megaraid_sas: Fix fw_crash_buffer_show() If crash_dump_buf is not allocated then crash dump can't be available. Replace logical 'and' with 'or'. Signed-off-by: Tomas Henzl Link: https://lore.kernel.org/r/20230324135249.9733-1-thenzl@redhat.com Signed-off-by: Martin K. Petersen --- drivers/scsi/megaraid/megaraid_sas_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index 3ceece988338..c895189375e2 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -3298,7 +3298,7 @@ fw_crash_buffer_show(struct device *cdev, spin_lock_irqsave(&instance->crashdump_lock, flags); buff_offset = instance->fw_crash_buffer_offset; - if (!instance->crash_dump_buf && + if (!instance->crash_dump_buf || !((instance->fw_crash_state == AVAILABLE) || (instance->fw_crash_state == COPYING))) { dev_err(&instance->pdev->dev, -- cgit v1.2.3-70-g09d2 From 2309df27111a51734cb9240b4d3c25f2f3c6ab06 Mon Sep 17 00:00:00 2001 From: Tomas Henzl Date: Fri, 24 Mar 2023 16:01:34 +0100 Subject: scsi: megaraid_sas: Fix crash after a double completion When a physical disk is attached directly "without JBOD MAP support" (see megasas_get_tm_devhandle()) then there is no real error handling in the driver. Return FAILED instead of SUCCESS. Fixes: 18365b138508 ("megaraid_sas: Task management support") Signed-off-by: Tomas Henzl Link: https://lore.kernel.org/r/20230324150134.14696-1-thenzl@redhat.com Signed-off-by: Martin K. Petersen --- drivers/scsi/megaraid/megaraid_sas_fusion.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index 84c9a55a5794..8a83f3fc2b86 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -4771,7 +4771,7 @@ int megasas_task_abort_fusion(struct scsi_cmnd *scmd) devhandle = megasas_get_tm_devhandle(scmd->device); if (devhandle == (u16)ULONG_MAX) { - ret = SUCCESS; + ret = FAILED; sdev_printk(KERN_INFO, scmd->device, "task abort issued for invalid devhandle\n"); mutex_unlock(&instance->reset_mutex); @@ -4841,7 +4841,7 @@ int megasas_reset_target_fusion(struct scsi_cmnd *scmd) devhandle = megasas_get_tm_devhandle(scmd->device); if (devhandle == (u16)ULONG_MAX) { - ret = SUCCESS; + ret = FAILED; sdev_printk(KERN_INFO, scmd->device, "target reset issued for invalid devhandle\n"); mutex_unlock(&instance->reset_mutex); -- cgit v1.2.3-70-g09d2 From f0aa59a33d2ac2267d260fe21eaf92500df8e7b4 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Wed, 22 Mar 2023 11:22:11 +0900 Subject: scsi: core: Improve scsi_vpd_inquiry() checks Some USB-SATA adapters have broken behavior when an unsupported VPD page is probed: Depending on the VPD page number, a 4-byte header with a valid VPD page number but with a 0 length is returned. Currently, scsi_vpd_inquiry() only checks that the page number is valid to determine if the page is valid, which results in receiving only the 4-byte header for the non-existent page. This error manifests itself very often with page 0xb9 for the Concurrent Positioning Ranges detection done by sd_read_cpr(), resulting in the following error message: sd 0:0:0:0: [sda] Invalid Concurrent Positioning Ranges VPD page Prevent such misleading error message by adding a check in scsi_vpd_inquiry() to verify that the page length is not 0. Signed-off-by: Damien Le Moal Link: https://lore.kernel.org/r/20230322022211.116327-1-damien.lemoal@opensource.wdc.com Reviewed-by: Benjamin Block Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 5cce1ba70fc6..09ef0b31dfc0 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -314,11 +314,18 @@ static int scsi_vpd_inquiry(struct scsi_device *sdev, unsigned char *buffer, if (result) return -EIO; - /* Sanity check that we got the page back that we asked for */ + /* + * Sanity check that we got the page back that we asked for and that + * the page size is not 0. + */ if (buffer[1] != page) return -EIO; - return get_unaligned_be16(&buffer[2]) + 4; + result = get_unaligned_be16(&buffer[2]); + if (!result) + return -EIO; + + return result + 4; } static int scsi_get_vpd_size(struct scsi_device *sdev, u8 page) -- cgit v1.2.3-70-g09d2 From d684a7a26f7d2c7122a4581ac966ed64e88fb29c Mon Sep 17 00:00:00 2001 From: Jerry Snitselaar Date: Fri, 24 Mar 2023 12:32:04 -0700 Subject: scsi: mpt3sas: Don't print sense pool info twice _base_allocate_sense_dma_pool() already prints out the sense pool information, so don't print it a second time after calling it in _base_allocate_memory_pools(). In addition the version in _base_allocate_memory_pools() was using the wrong size value, sz, which was last assigned when doing some nvme calculations instead of sense_sz to determine the pool size in kilobytes. Cc: Sathya Prakash Cc: Sreekanth Reddy Cc: Suganath Prabu Subramani Cc: MPT-FusionLinux.pdl@broadcom.com Cc: "Martin K. Petersen" Cc: "James E.J. Bottomley" Fixes: 970ac2bb70e7 ("scsi: mpt3sas: Force sense buffer allocations to be within same 4 GB region") Signed-off-by: Jerry Snitselaar Link: https://lore.kernel.org/r/20230324193204.567932-1-jsnitsel@redhat.com Signed-off-by: Martin K. Petersen --- drivers/scsi/mpt3sas/mpt3sas_base.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 2ee9ea57554d..14ae0a9c5d3d 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -6616,11 +6616,6 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc) else if (rc == -EAGAIN) goto try_32bit_dma; total_sz += sense_sz; - ioc_info(ioc, - "sense pool(0x%p)- dma(0x%llx): depth(%d)," - "element_size(%d), pool_size(%d kB)\n", - ioc->sense, (unsigned long long)ioc->sense_dma, ioc->scsiio_depth, - SCSI_SENSE_BUFFERSIZE, sz / 1024); /* reply pool, 4 byte align */ sz = ioc->reply_free_queue_depth * ioc->reply_sz; rc = _base_allocate_reply_pool(ioc, sz); -- cgit v1.2.3-70-g09d2